-
TPDH-Graphene as a New Anodic Material for Lithium Ion Battery: DFT-Based Investigations
Authors:
Juan Gomez Quispe,
Bruno Bueno Ipaves Nascimento,
Douglas Soares Galvao,
Pedro Alves da Silva Autreto
Abstract:
The potential of tetra-penta-deca-hexagonal graphene (TPDH-gr), a recently proposed 2D carbon allotrope as an anodic material in lithium ion batteries (LIB), was investigated through density functional theory (DFT) calculations. The results indicate that Li-atom adsorption is moderate (around 0.70 eV), allowing for easy desorption. Moreover, energy barrier, diffusion coefficient, and open circuit…
▽ More
The potential of tetra-penta-deca-hexagonal graphene (TPDH-gr), a recently proposed 2D carbon allotrope as an anodic material in lithium ion batteries (LIB), was investigated through density functional theory (DFT) calculations. The results indicate that Li-atom adsorption is moderate (around 0.70 eV), allowing for easy desorption. Moreover, energy barrier, diffusion coefficient, and open circuit voltage (OCV) calculations show rapid Li atom diffusion on the TPDH-gr surface, stable intercalation of lithium atoms, and good performance during the charge and discharge cycles of the LIB. These findings, combined with the intrinsic metallic nature of TPDH-gr, indicate that this new 2D carbon allotrope is a promising candidate for use as an anodic LIB material.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Exploring the Electronic and Mechanical Properties of TPDH-Nanotube: Insights from Ab initio and Classical Molecular Dynamics Simulations
Authors:
Juan Gomez Quispe,
Douglas Soares Galvao,
Pedro Alves da Silva Autreto
Abstract:
Tetra-Penta-Deca-Hexa-graphene (TPDH) is a new 2D carbon allotrope with attractive electronic and mechanical properties. It is composed of tetragonal, pentagonal, and hexagonal carbon rings. When TPDH-graphene is sliced into quasi-one-dimensional (1D) structures like nanoribbons, it exhibits a range of behaviors, from semi-metallic to semiconducting. An alternative approach to achieving these desi…
▽ More
Tetra-Penta-Deca-Hexa-graphene (TPDH) is a new 2D carbon allotrope with attractive electronic and mechanical properties. It is composed of tetragonal, pentagonal, and hexagonal carbon rings. When TPDH-graphene is sliced into quasi-one-dimensional (1D) structures like nanoribbons, it exhibits a range of behaviors, from semi-metallic to semiconducting. An alternative approach to achieving these desirable electronic (electronic confinement and/or non-zero electronic band gap) properties is the creation of nanotubes (TPDH-NT). In the present work, we carried out a comprehensive study of TPDH-NTs combining Density Functional Theory (DFT) and Classical Reactive Molecular Dynamics (MD). Our results show structural stability and a chiral dependence on mechanical properties. Similarly to standard carbon nanotubes, TPDH-NT can be metallic or semiconductor. MD results show Young's modulus values exceeding $700$ GPa, except for nanotubes with very small radii. However, certain chiral TPDH-NTs (n,m) display values both below and above $700$ GPa, particularly for those with small radii. The analyses of the angle and C-C bond length distributions underscore the significance of the tetragonal and pentagonal rings in determining the mechanical response of TPDH-NTs (n,0) and (0,n), respectively.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Selective Hydrogenation Promotes Anisotropic Thermoelectric Properties of TPDH-Graphene
Authors:
Caique Campos de Oliveira,
Douglas Soares Galvao,
Pedro Alves da Silva Autreto
Abstract:
We have combined DFT calculations with the Boltzmann semiclassical transport theory to investigate the effect of selective hydrogenation on the thermoelectric properties of tetra-penta-deca-hexagonal graphene (TPDH-gr), a recently proposed new 2D carbon allotrope. Our results show that the Seebeck coefficient is enhanced after hydrogenation. The conductivity along the x direction is increased almo…
▽ More
We have combined DFT calculations with the Boltzmann semiclassical transport theory to investigate the effect of selective hydrogenation on the thermoelectric properties of tetra-penta-deca-hexagonal graphene (TPDH-gr), a recently proposed new 2D carbon allotrope. Our results show that the Seebeck coefficient is enhanced after hydrogenation. The conductivity along the x direction is increased almost eight times while being almost suppressed along the y direction. This behavior can be understood in terms of the electronic structure changes due to the appearance of a Dirac-like cone after the selective hydrogenation. Consistent with the literature, the electronic contribution to thermal conductivity displays the same qualitative behavior as the conductivity, as expected from the Wiedemann-Franz law. The increase in thermal conductivity with temperature limits the material's power factor. The significant increase in the Seebeck coefficient and conductivity increases also contribute to the thermal conductivity increase. These results show that hydrogenation is an effective method to improve the TPDH-gr thermoelectric properties, and this carbon allotrope can be an effective material for thermoelectric applications.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
Machine Learning-based Analysis of Electronic Properties as Predictors of Anticholinesterase Activity in Chalcone Derivatives
Authors:
Thiago Buzelli,
Bruno Ipaves,
Wanda Pereira Almeida,
Douglas Soares Galvao,
Pedro Alves da Silva Autreto
Abstract:
In this study, we investigated the correlation between the electronic properties of anticholinesterase compounds and their biological activity. While the methodology of such correlation is well-established and has been effectively utilized in previous studies, we employed a more sophisticated approach: machine learning. Initially, we focused on a set of $22$ molecules sharing a common chalcone ske…
▽ More
In this study, we investigated the correlation between the electronic properties of anticholinesterase compounds and their biological activity. While the methodology of such correlation is well-established and has been effectively utilized in previous studies, we employed a more sophisticated approach: machine learning. Initially, we focused on a set of $22$ molecules sharing a common chalcone skeleton and categorized them into two groups based on their IC50 indices: active and inactive. Utilizing the open-source software Orca, we conducted calculations to determine the geometries and electronic structures of these molecules. Over a hundred parameters were collected from these calculations, serving as the foundation for the features used in machine learning. These parameters included the Mulliken and Lowdin electronic populations of each atom within the skeleton, molecular orbital energies, and Mayer's free valences. Through our analysis, we developed numerous models and identified several successful candidates for effectively distinguishing between the two groups. Notably, the most informative descriptor for this separation relied solely on electronic populations and orbital energies. By understanding which computationally calculated properties are most relevant to specific biological activities, we can significantly enhance the efficiency of drug development processes, saving both time and resources.
△ Less
Submitted 13 September, 2023;
originally announced September 2023.
-
Nanomechanical behavior of pentagraphyne-based single-layer and nanotubes through reactive classical molecular dynamics
Authors:
J. M. De Sousa,
W. H. S. Brandão,
W. L. A. P. Silva,
L. A. Ribeiro Junior,
D. S. Galvão,
M. L. Pereira Júnior
Abstract:
In a recent theoretical study, a new 2D carbon allotrope called pentagraphyne (PG-yne) was proposed. This allotrope is derived from pentagraphene by introducing acetylenic linkages between sp3 and sp2 hybridized carbon atoms. Due to its interesting electronic and structural properties, it is of interest to investigate the mechanical behavior of PG-yne in both monolayer and nanotube topologies. To…
▽ More
In a recent theoretical study, a new 2D carbon allotrope called pentagraphyne (PG-yne) was proposed. This allotrope is derived from pentagraphene by introducing acetylenic linkages between sp3 and sp2 hybridized carbon atoms. Due to its interesting electronic and structural properties, it is of interest to investigate the mechanical behavior of PG-yne in both monolayer and nanotube topologies. To achieve this, we performed fully atomistic reactive (ReaxFF) molecular dynamics simulations, and our results show that Young's modulus average of PG-yne monolayers is approximately 913 GPa, at room temperature. In comparison, it ranges from 497-789 GPa for the nanotubes studied. Furthermore, we observed that PG-yne monolayers exhibit a direct transition from elastic to complete fracture under critical strain without a plastic regime. In contrast, some PG-yne nanotubes exhibit an extended flat plastic regime before total fracture.
△ Less
Submitted 12 June, 2023;
originally announced June 2023.
-
Quantum Biochemical Analysis of the TtgR Regulator and Effectors
Authors:
E. G. C. Matias,
K. S. Bezerra,
A. H. Lima Costa,
W. S. Clemente,
J. I. N. Oliveira,
L. A. Ribeiro Junior,
D. S. Galvao,
U. L. Fulco
Abstract:
The recent expansion of multidrug-resistant (MDR) pathogens poses significant challenges in treating healthcare-associated infections. Although antibacterial resistance occurs by numerous mechanisms, active efflux of the drugs is a critical concern. A single species of efflux pump can produce a simultaneous resistance to several drugs. One of the best-studied efflux pumps is the TtgABC: a triparti…
▽ More
The recent expansion of multidrug-resistant (MDR) pathogens poses significant challenges in treating healthcare-associated infections. Although antibacterial resistance occurs by numerous mechanisms, active efflux of the drugs is a critical concern. A single species of efflux pump can produce a simultaneous resistance to several drugs. One of the best-studied efflux pumps is the TtgABC: a tripartite resistance-nodulation-division (RND) efflux pump implicated in the intrinsic antibiotic resistance in Pseudomonas putida DOT-T1E. The expression of the TtgABC gene is down-regulated by the HTH-type transcriptional repressor TtgR. In this context, by employing quantum chemistry methods based on the Density Functional Theory (DFT) within the Molecular Fragmentation with Conjugate Caps (MFCC) approach, we investigate the coupling profiles of the transcriptional regulator TtgR in complex with quercetin (QUE), a natural polyphenolic flavonoid, tetracycline (TAC), and chloramphenicol (CLM), two broad-spectrum antimicrobial agents. Our quantum biochemical computational results show the: [i] convergence radius, [ii] total binding energy, [iii] relevance (energetically) of the ligands regions, and [iv] most relevant amino acids residues of the TtgR-QUE/TAC/CLM complexes, pointing out distinctions and similarities among them. These findings improve the understanding of the binding mechanism of effectors and facilitate the development of new chemicals targeting TtgR, hel** in the battle against the rise of resistance to antimicrobial drugs.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Two-dimensional (2D) d-Silicates from abundant natural minerals
Authors:
Preeti Lata Mahapatra,
Appu Kumar Singh,
Raphael Tromer,
Karthik R.,
Ambresha M.,
Gelu Costin,
Basudev Lahiri,
Tarun Kumar Kundu,
P. M. Ajayan,
Douglas S. Galvao,
Chandra Shekhar Tiwary
Abstract:
In the last decade, the materials community has been exploring new 2D materials (graphene, metallene, TMDs, TMCs, MXene, among others) that have unique physical and chemical properties. Recently, a new family of 2D materials, the so-called 2D silicates, have been proposed. They are predicted to exhibit exciting properties (such as high catalytic activity, piezoelectricity, and 2D magnetism). In th…
▽ More
In the last decade, the materials community has been exploring new 2D materials (graphene, metallene, TMDs, TMCs, MXene, among others) that have unique physical and chemical properties. Recently, a new family of 2D materials, the so-called 2D silicates, have been proposed. They are predicted to exhibit exciting properties (such as high catalytic activity, piezoelectricity, and 2D magnetism). In the current work, we demonstrate a generic approach to the synthesis of large-scale 2D silicates from selected minerals, such as Diopside (d). Different experimental techniques were used to confirm the existence of the 2D structures (named 2D-d-silicates). DFT simulations were also used to gain insight into the structural features and energy harvesting mechanisms (flexoelectric response generating voltage up to 10 V). The current approach is completely general and can be utilized for large-scale synthesis of 2D silicates and their derivatives, whose large-scale syntheses have been elusive.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Fully Atomistic Molecular Dynamics Simulations of Elastic Properties of Tetragraphene Monolayer
Authors:
Wjefferson H. S. Brandão,
Acrisio L. Aguiar,
Alexandre F. Fonseca,
D. S. Galvão,
J. M. De Sousa
Abstract:
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under differe…
▽ More
A quasi-2D semiconductor carbon allotrope called tetrahexcarbon, also named tetragraphene, was recently proposed featuring an unusual structure combining squared and hexagonal rings. Mechanical and electronic properties of tetragraphene have been predicted based on first-principles Density Functional Theory (DFT) calculations. However, a comprehensive study of its mechanical behavior under different temperatures is still lacking. In this work, using fully atomistic reactive molecular dynamics (MD) simulations, we investigate the mechanical properties of monolayer tetragraphene under tensile strain from the linear regime up to the complete structural failure (fracture). Different temperatures were considered and the results were compared to that of two other known planar carbon allotropes: graphene and penta-graphene. One interesting result is that tetragraphene experiences a transition from crystalline to an amorphous structure by either temperature or tension application. At room temperature, the critical strains along the two orthogonal unit-cell directions of tetragraphene are 38\% and 30\%, which is higher than that for graphene and penta-graphene. Tetragraphene Young's modulus values along its directions are from three to six times smaller than that of graphene and about 57\% that of penta-graphene at room temperature. Ultimate tensile strength values along the two directions of tetragraphene were obtained and also shown to be smaller than that of graphene and penta-graphene.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
Multifold enhancement in magnetization of atomically thin Cobalt Telluride
Authors:
Solomon Demiss,
Raphael Tromer,
Saif Siddique,
Cristiano F. Woellner,
Olu Emmanuel Femi,
Mithun Palit,
Ajit K. Roy,
Prafull Pandey,
Douglas S. Galvao,
Partha Kumbhakar,
Chandra Sekhar Tiwary
Abstract:
Magnetism in semiconductor two-dimensional (2D) materials is gaining popularity due to its potential application in memory devices, sensors, spintronic and biomedical applications. Here, 2D Cobalt Telluride (CoTe) has been synthesized from its bulk crystals using a simple and scalable liquid-phase exfoliation method. The atomically thin CoTe shows over four hundred times enhancement in its magneti…
▽ More
Magnetism in semiconductor two-dimensional (2D) materials is gaining popularity due to its potential application in memory devices, sensors, spintronic and biomedical applications. Here, 2D Cobalt Telluride (CoTe) has been synthesized from its bulk crystals using a simple and scalable liquid-phase exfoliation method. The atomically thin CoTe shows over four hundred times enhancement in its magnetic saturation values compared to the bulk form. The UV-Vis absorption spectra reveal superior absorption in the high energy region, suggesting a semiconducting nature. Furthermore, we explain bandgap and origin of high magnetic behavior by density functional theory (DFT) calculations. The 2D CoTe shows a larger magnetism compared to bulk CoTe due to the reduced coordination number of the surface atoms, shape anisotropy and surface charge effect.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Two-dimensional Cobalt Telluride as Piezo-tribogenerator
Authors:
Solomon Demiss,
Raphael Tromer,
Chinmayee Chowde Gowda,
Olu Emmanuel Femi,
Ajit K. Roy,
Prafull Pandey,
Douglas S. Galvao,
Partha Kumbhakar,
Pulickel M. Ajayan,
Chandra Sekhar Tiwary
Abstract:
Two-dimensional (2D) materials have been shown to be efficient in energy harvesting. Here, we report utilization of waste heat to generate electricity via combined piezoelectric and triboelectric property of 2D Cobalt Telluride (CoTe2). The piezo-triboelectric nanogenerator (PTNG) produced an open-circuit voltage of ~5V under 1N force and the effect of temperature in the 305-363 K range shows a fo…
▽ More
Two-dimensional (2D) materials have been shown to be efficient in energy harvesting. Here, we report utilization of waste heat to generate electricity via combined piezoelectric and triboelectric property of 2D Cobalt Telluride (CoTe2). The piezo-triboelectric nanogenerator (PTNG) produced an open-circuit voltage of ~5V under 1N force and the effect of temperature in the 305-363 K range shows a four-fold energy conversion efficiency improvement. The 2D piezo-tribogenerator shows excellent characteristics with a maximum voltage of ~10V, fast response time and high responsivity. Density functional theory was used to gain further insights and validation of the experimental results. Our results could lead to energy harvesting approaches using 2D materials from various thermal sources and dissipated waste heat from electronic devices.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
A Reactive Molecular Dynamics Study of Hydrogenation on Diamond Surfaces
Authors:
Eliezer F. Oliveira,
Mahesh R. Neupane,
Chenxi Li,
Harikishan Kannan,
Xiang Zhang,
Anand B. Puthirath,
Pankaj B. Shah,
A. Glen Birdwell,
Tony G. Ivanov,
Robert Vajtai,
Douglas S. Galvao,
Pulickel M. Ajayan
Abstract:
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond s…
▽ More
Hydrogenated diamond has been regarded as a promising material in electronic device applications, especially in field-effect transistors (FETs). However, the quality of diamond hydrogenation has not yet been established, nor has the specific orientation that would provide the optimum hydrogen coverage. In addition, most theoretical work in the literature use models with 100% hydrogenated diamond surfaces to study electronic properties, which is far from the experimentally observed hydrogen coverage. In this work, we have carried out a detailed study using fully atomistic reactive molecular dynamics (MD) simulations on low indices diamond surfaces i.e. (001), (013), (110), (113) and (111) to evaluate the quality and hydrogenation thresholds on different diamond surfaces and their possible effects on electronic properties. Our simulation results indicate that the 100% surface hydrogenation in these surfaces is hard to achieve because of the steric repulsion between the terminated hydrogen atoms. Among all the considered surfaces, the (001), (110), and (113) surfaces incorporate a larger number of hydrogen atoms and passivate the surface dangling bonds. Our results on hydrogen stability also suggest that these surfaces with optimum hydrogen coverage are robust under extreme conditions and could provide homogeneous p-type surface conductivity in the diamond surfaces, a key requirement for high-field, high-frequency device applications.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Mechanical Properties of 3D-Printed Pentadiamond
Authors:
Levi C. Felix,
Rushikesh S. Ambekar,
Cristiano F. Woellner,
Brijesh Kushwaha,
Varinder Pal,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carbon allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independ…
▽ More
In this work, We combined fully atomistic molecular dynamics and finite elements simulations with mechanical testings to investigate the mechanical behavior of atomic and 3D-printed models of pentadiamond. Pentadiamond is a recently proposed new carbon allotrope, which is composed of a covalent network of pentagonal rings. Our results showed that the stress-strain behavior is almost scale-independent. The stress-strain curves of the 3D-printed structures exhibit three characteristic regions. For low-strain values, this first region presents a non-linear behavior close to zero, followed by a well-defined linear behavior. The second regime is a quasi-plastic one and the third one is densification followed by structural failures (fracture). The Young's modulus values decrease with the number of pores. The deformation mechanism is bending-dominated and different from the layer-by-layer deformation mechanism observed for other 3D-printed structures. They exhibit good energy absorption capabilities, with some structures even outperforming kevlar. Interestingly, considering the Ashby chart, 3D-printed pentadiamond lies almost on the ideal stretch and bending-dominated lines, making them promising materials for energy absorption applications.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Controlling Movement at Nanoscale: Curvature Driven Mechanotaxis
Authors:
Leonardo D. Machado,
Rafael A. Bizao,
Nicola M. Pugno,
Douglas S. Galvão
Abstract:
Locating and manipulating nano-sized objects to drive motion is a time and effort consuming task. Recent advances show that it is possible to generate motion without direct intervention, by embedding the source of motion in the system configuration. In this work, we demonstrate an alternative manner to controllably displace nano-objects without external manipulation, by employing spiral-shaped car…
▽ More
Locating and manipulating nano-sized objects to drive motion is a time and effort consuming task. Recent advances show that it is possible to generate motion without direct intervention, by embedding the source of motion in the system configuration. In this work, we demonstrate an alternative manner to controllably displace nano-objects without external manipulation, by employing spiral-shaped carbon nanotube (CNT) and graphene nanoribbon structures (GNR). The spiral shape contains smooth gradients of curvature, which lead to smooth gradients of bending energy. We show these gradients can drive nanoscillators. We also carry out an energy analysis by approximating the carbon nanotube to a thin rod and discuss how torsional gradients can be used to drive motion. For the nanoribbons, we also analyzed the role of layer orientation. Our results show that motion is not sustainable for commensurate orientations, in which AB stacking occurs. For incommensurate orientations, friction almost vanishes, and in this instance, the motion can continue even if the driving forces are not very high. This suggests that mild curvature gradients, which can already be found in existing nanostructures, could provide mechanical stimuli to direct motion.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets
Authors:
Anand B. Puthirath,
Aravind Puthirath Balan,
Eliezer F. Oliveira,
Vishnu Sreepal,
Francisco C. Robles Hernandez,
Guanhui Gao,
Nithya Chakingal,
Lucas M. Sassi,
Prasankumar Thibeorchews,
Gelu Costin,
Robert Vajtai,
Douglas S. Galvao,
Rahul R. Nair,
Pulickel M. Ajayan
Abstract:
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (…
▽ More
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.
△ Less
Submitted 28 August, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
Mechanical Properties of Diamond Schwarzites: From Molecular Dynamics Simulations to 3D Printing
Authors:
Levi C. Felix,
Vladimir Gaál,
Cristiano F. Woellner,
Varlei Rodrigues,
Douglas S. Galvao
Abstract:
Schwarzites are porous crystalline structures with Gaussian negative curvature. In this work, we investigated the mechanical behavior and energy absorption properties of two carbon-based diamond schwarzites (D688 and D8bal). We carried out fully atomistic molecular dynamics (MD) simulations. The optimized MD atomic models were used to generate macro-scale models for 3D-printing (PolyLactic Acid (P…
▽ More
Schwarzites are porous crystalline structures with Gaussian negative curvature. In this work, we investigated the mechanical behavior and energy absorption properties of two carbon-based diamond schwarzites (D688 and D8bal). We carried out fully atomistic molecular dynamics (MD) simulations. The optimized MD atomic models were used to generate macro-scale models for 3D-printing (PolyLactic Acid (PLA) polymer filaments) through Fused Deposition Modelling (FDM). Mechanical properties under uniaxial compression were investigated for both the atomic models and the 3D-printed ones. Mechanical testings were performed on the 3D-printed schwarzites where the deformation mechanisms were found to be similar to those observed in MD simulations. These results are suggestive of a scale-independent mechanical behavior that is dominated by structural topology. The structures exhibit high specific energy absorption and crush force efficiency ~0.8, which suggest that the 3D-printed diamond schwarzites are good candidates as energy-absorbing materials.
△ Less
Submitted 16 April, 2020;
originally announced June 2020.
-
Zeolite-inspired 3d printed structures with enhanced mechanical properties
Authors:
Rushikesh S. Ambekar,
Eliezer F. Oliveira,
Brijesh Kushwaha,
Leonardo D. Machado,
Mohammad Sajadi,
Ray H. Baughman,
Pulickel M. Ajayan,
Ajit K. Roy,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r…
▽ More
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
△ Less
Submitted 12 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Ballistic Properties of Highly Stretchable Graphene Kirigami Pyramid
Authors:
Alirio Moura,
Douglas S. Galvao,
Pedro Alves da Silva Autreto
Abstract:
Graphene kirigami (patterned cuts) can be an effective way to improve some of the graphene mechanical and electronic properties. In this work, we report the first study of the mechanical and ballistic behavior of single and multilayered graphene pyramid kirigami (GKP). We have carriedout fully atomistic reactive molecular dynamics simulations. GPK presents a unique kinetic energy absorption due to…
▽ More
Graphene kirigami (patterned cuts) can be an effective way to improve some of the graphene mechanical and electronic properties. In this work, we report the first study of the mechanical and ballistic behavior of single and multilayered graphene pyramid kirigami (GKP). We have carriedout fully atomistic reactive molecular dynamics simulations. GPK presents a unique kinetic energy absorption due to its topology that creates multi-steps dissipation mechanisms, which block crack propagation. Our results show that even having significantly less mass, GKP can outperform graphene structures with similar dimensions in terms of absorbing kinetic energy.
△ Less
Submitted 26 January, 2020;
originally announced January 2020.
-
Mechanical Properties of a Diamond Schwarzite: From Atomistic Models to 3D-Printed Structures
Authors:
Levi C. Felix,
Vladimir Gaal,
Cristiano F. Woellner,
Varlei Rodrigues,
Douglas S. Galvao
Abstract:
Triply Periodic Minimal Surfaces (TPMS) possess locally minimized surface area under the constraint of periodic boundary conditions. Different families of surfaces were obtained with different topologies satisfying such conditions. Examples of such families include Primitive (P), Gyroid (G) and Diamond (D) surfaces. From a purely mathematical subject, TPMS have been recently found in materials sci…
▽ More
Triply Periodic Minimal Surfaces (TPMS) possess locally minimized surface area under the constraint of periodic boundary conditions. Different families of surfaces were obtained with different topologies satisfying such conditions. Examples of such families include Primitive (P), Gyroid (G) and Diamond (D) surfaces. From a purely mathematical subject, TPMS have been recently found in materials science as optimal geometries for structural applications. Proposed by Mackay and Terrones in 1991, schwarzites are 3D crystalline porous carbon nanocrystals exhibiting the shape of TPMS. Although their complex topology poses serious limitations on their synthesis with conventional nanoscale fabrication methods, such as Chemical Vapour Deposition (CVD), TPMS can be fabricated by Additive Manufacturing (AM) techniques, such as 3D Printing. In this work, we used an optimized atomic model of a schwarzite structure from the D family (D8bal) to generate a surface mesh that was subsequently used for 3D-printing through Fused Deposition Modelling (FDM). This D schwarzite was 3D-printed with thermoplastic PolyLactic Acid (PLA) polymer filaments. Mechanical properties under uniaxial compression were investigated for both the atomic model and the 3D-printed one. Fully atomistic Molecular Dynamics (MD) simulations were also carried out to investigate the uniaxial compression behavior of the D8bal atomic model. Mechanical testings were performed on the 3D-printed schwarzite where the deformation mechanisms were found to be similar to those observed in MD simulations. These results are suggestive of a scale-independent mechanical behavior that is dominated by structural topology.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Torsional refrigeration by twisted, coiled, and supercoiled fibers
Authors:
Run Wang,
Shaoli Fang,
Yicheng Xiao,
Enlai Gao,
Nan Jiang,
Yaowang Li,
Linlin Mou,
Yanan Shen,
Wubin Zhao,
Sitong Li,
Alexandre F. Fonseca,
Douglas S. Galvão,
Mengmeng Chen,
Wenqian He,
Kaiqing Yu,
Hongbing Lu,
Xuemin Wang,
Dong Qian,
Ali E. Aliev,
Na Li,
Carter S. Haines,
Zhongsheng Liu,
Jiuke Mu,
Zhong Wang,
Shougen Yin
, et al. (5 additional authors not shown)
Abstract:
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural r…
▽ More
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, NiTi, and polyethylene fishing line. By using opposite chiralities of twist and coiling, supercoiled natural rubber fibers and coiled fishing line fibers result that cool when stretched. A demonstrated twist-based device for cooling flowing water provides a high cooling energy and device efficiency. Theory describes the axial and spring index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
New zero Poisson's ratio models
Authors:
Vladimir Gaal,
Varlei Rodrigues,
Socrates O. Dantas,
Douglas S. Galvao,
Alexandre F. Fonseca
Abstract:
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on…
▽ More
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on a structural block composed of two smooth and rigid bars connected by a soft membrane or spring. It is not based on re-entrant or honeycomb-like configurations, which have been the basis of many null or quasi-null PR models. Our topological model was 3D printed and the experimentally obtained PR was$-0.003\,\pm 0.001\,$, which is one the closest to zero value ever reported. This topological model can be easily extended to 3D systems and with compression in any direction. The advantages and disadvantages of these models are also addressed.
△ Less
Submitted 14 September, 2019;
originally announced September 2019.
-
The Structure of Graphene on Graphene/C60/Cu Interfaces: A Molecular Dynamics Study
Authors:
Alexandre F. Fonseca,
Sócrates O. Dantas,
Douglas S. Galvão,
Difan Zhang,
Susan B. Sinnott
Abstract:
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular…
▽ More
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular dynamics simulations to study the formation and thermal stability of graphene wrinkles as well as graphene attachment to and detachment from the substrate when graphene is laid over a previously distributed array of C60 molecules on a copper substrate at different values of temperature. As graphene compresses the C60 molecules against the substrate, and graphene attachment to the substrate between C60s ("C60s" stands for plural of C60) depends on the height of graphene wrinkles, configurations with both frozen and non-frozen C60s structures were investigated in order to verify the experimental result of stable sagged graphene when the distance between C60s is about 4 nm and height of graphene wrinkles is about 0.8 nm. Below the distance of 4 nm between C60s, graphene becomes locally suspended and less strained. We show that this happens when C60s are allowed to deform under the compressive action of graphene. If we keep the C60s frozen, spontaneous "blanketing" of graphene happens only when the distance between them are equal or above 7 nm. Both above results for the existence of stable sagged graphene for C60 distances of 4 or 7 nm are shown to agree with a mechanical model relating the rigidity of graphene to the energy of graphene-substrate adhesion. In particular, this study might help the development of 2D confined nanoreactors that are considered in literature to be the next advanced step on chemical reactions.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Mechanical Properties of Protomene: A Molecular Dynamics Investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have n…
▽ More
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have not been investigated. In this work, we have investigated protomene mechanical behavior under tensile strain through fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, as available in the LAMMPS code. At room temperature, our results show that the protomene is very stable and the obtained ultimate strength and ultimate stress indicates an anisotropic behavior. The highest ultimate strength was obtained for the x-direction, with a value of ~110 GPa. As for the ultimate strain, the highest one was for the z-direction (~25% of strain) before protomene mechanical fracture.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Schwarzites for Natural Gas Storage: A Grand-Canonical Monte Carlo Study
Authors:
Daiane Damasceno Borges,
Douglas S. Galvao
Abstract:
The 3D porous carbon-based structures called Schwarzites have been recently a subject of renewed interest due to the possibility of being synthesized in the near future. These structures exhibit negatively curvature topologies with tuneable porous sizes and shapes, which make them natural candidates for applications such as CO2 capture, gas storage and separation. Nevertheless, the adsorption prop…
▽ More
The 3D porous carbon-based structures called Schwarzites have been recently a subject of renewed interest due to the possibility of being synthesized in the near future. These structures exhibit negatively curvature topologies with tuneable porous sizes and shapes, which make them natural candidates for applications such as CO2 capture, gas storage and separation. Nevertheless, the adsorption properties of these materials have not been fully investigated. Following this motivation, we have carried out Grand-Canonical Monte Carlo simulations to study the adsorption of small molecules such as CO2, CO, CH4, N2 and H2, in a series of Schwarzites structures. Here, we present our preliminary results on natural gas adsorptive capacity in association with analyses of the guest-host interaction strengths. Our results show that Schwarzites P7par, P8bal and IWPg are the most promising structures with very high CO2 and CH4 adsorption capacity and low saturation pressure (<1bar) at ambient temperature. The P688 is interesting for H2 storage due to its exceptional high H2 adsorption enthalpy value of -19kJ/mol.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Ultralow Density Graphene Oxide/Polydimethylsiloxane Foams
Authors:
Cristiano F. Woellner,
Peter S. Owuor,
Tong Li,
Soumya Vinod,
Sehmus Ozden,
Suppanat Kosolwattana,
Sanjit Bhowmick,
Luong X. Duy,
Rodrigo V. Salvatierra,
Bingqing Wei,
Syed A. S. Asif,
James M. Tour,
Robert Vajtai,
Jun Lou,
Douglas S. Galvao,
Chandra S. Tiwary,
Pulickel. M. Ajayan
Abstract:
Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical prop…
▽ More
Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical properties are mainly attributed to the intrinsic graphene and/or GO electronic and mechanical properties. Despite the attractive physical properties of graphene/GO based-foams, their structural and thermal stabilities are still a problem for some applications. For instance, they are easily degraded when placed in flowing solutions, either by the collapsing of their layers or just by structural disintegration into small pieces. Recently, a new and scalable synthetic approach to produce low-density 3D macroscopic GO structure interconnected with polydimethylsiloxane (PDMS) polymeric chains (pGO) was proposed. A controlled amount of PDMS is infused into the freeze-dried foam resulting into a very rigid structure with improved mechanical properties, such as tensile plasticity and toughness. The PDMS wets the graphene oxide sheets and acts like a glue bonding PDMS and GO sheets. In order to obtain further insights on mechanisms behind the enhanced mechanical pGO response we carried out fully atomistic molecular dynamics (MD) simulations. Based on MD results, we build up a structural model that can explain the experimentally observed mechanical behavior.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Schwarzites - A Fully Atomistic Reactive Molecular Dynamics Investigation
Authors:
Cristiano F. Woellner,
Tiago Botari,
Eric Perim,
Douglas S. Galvao
Abstract:
Schwarzites are crystalline, 3D porous structures with stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strains and energy absorption of four different Schwarzites, through reactive molecular dynamics…
▽ More
Schwarzites are crystalline, 3D porous structures with stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strains and energy absorption of four different Schwarzites, through reactive molecular dynamics simulations, using the ReaxFF force field as available in the LAMMPS code. We considered two Schwarzites families, the so-called Gyroid and Primitive and two structures from each family. Our results also show they exhibit remarkable resilience under mechanical compression. They can be reduced to half of their original size before structural failure (fracture) occurs.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Molecular Dynamics Simulations of Ballistic Penetration of Pentagraphene Sheets
Authors:
David L. Azevedo,
Rafael A. Bizao,
Douglas S. Galvao
Abstract:
The superior mechanical properties and low density of carbon nanostructures make them promising ballistic protection materials, stimulating investigations on their high-strain-rate behavior. Recent experiments and simulations revealed graphene possesses exceptional energy absorption properties. In this work, we analyzed through fully atomistic molecular dynamics simulations the ballistic performan…
▽ More
The superior mechanical properties and low density of carbon nanostructures make them promising ballistic protection materials, stimulating investigations on their high-strain-rate behavior. Recent experiments and simulations revealed graphene possesses exceptional energy absorption properties. In this work, we analyzed through fully atomistic molecular dynamics simulations the ballistic performance of a carbon-based material recently proposed named penta-graphene. Our results show that the fracture pattern is more spherical (no petals formation like observed for graphene). The estimated penetration energy for pentagraphene structures considered here was of 37.69 MJ/Kg, far superior to graphene (29.8 MJ/Kg) under same conditions. These preliminary results are suggestive that pentagraphene could be an excellent material for ballistic applications.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Silver Hardening via Hypersonic Impacts
Authors:
Eliezer Fernando Oliveira,
Pedro Alves da Silva Autreto,
Douglas Soares Galvao
Abstract:
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This met…
▽ More
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This method consists of producing high impact collisions of silver cubes at hypersonic velocity (~400 m/s) against a rigid wall. Although they observed an improvement in the mechanical properties of the silver after the impact, the GNG creation and the strengthening mechanism at nanoscale remain unclear. In order to gain further insights about these mechanisms, we carried out fully atomistic molecular dynamics simulations (MD) to investigate the atomic conformations/rearrangements during and after high impact collisions of silver nanocubes at ultrasonic velocity. Our results indicate the co-existence of polycrystalline arrangements after the impact formed by core HCP domains surrounded by FCC ones, which could also contribute to explain the structural hardening.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Mechanical Properties and Fracture Patterns of Graphene (Graphitic) Nanowiggles
Authors:
Rafael A. Bizao,
Tiago Botari,
Eric Perim,
Nicola M. Pugno,
Douglas S. Galvao
Abstract:
Graphene nanowiggles (GNW) are graphene-based nanostructures obtained by making alternated regular cuts in pristine graphene nanoribbons. GNW were recently synthesized and it was demonstrated that they exhibit tunable electronic and magnetic properties by just varying their shape. Here, we have investigated the mechanical properties and fracture patterns of a large number of GNW of different shape…
▽ More
Graphene nanowiggles (GNW) are graphene-based nanostructures obtained by making alternated regular cuts in pristine graphene nanoribbons. GNW were recently synthesized and it was demonstrated that they exhibit tunable electronic and magnetic properties by just varying their shape. Here, we have investigated the mechanical properties and fracture patterns of a large number of GNW of different shapes and sizes using fully atomistic reactive molecular dynamics simulations. Our results show that the GNW mechanical properties are strongly dependent on its shape and size and, as a general trend narrow sheets have larger ultimate strength and Young's modulus than wide ones. The estimated Young's modulus values were found to be in a range of ~ 100-1000 GPa and the ultimate strength in a range of ~ 20-110 GPa, depending on GNW shape. Also, super-ductile behaviour under strain was observed for some structures.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Mechanical and Structural Properties of Graphene-like Carbon Nitride Sheets
Authors:
J. M. de Sousa,
T. Botari,
E. Perim,
R. A. Bizao,
Douglas S. Galvao
Abstract:
Carbon nitride-based nanostructures have attracted special attention (from theory and experiments) due to their remarkable electromechanical properties. In this work we have investigated the mechanical properties of some graphene-like carbon nitride membranes through fully atomistic reactive molecular dynamics simulations. We have analyzed three different structures of these CN families, the so-ca…
▽ More
Carbon nitride-based nanostructures have attracted special attention (from theory and experiments) due to their remarkable electromechanical properties. In this work we have investigated the mechanical properties of some graphene-like carbon nitride membranes through fully atomistic reactive molecular dynamics simulations. We have analyzed three different structures of these CN families, the so-called graphene-based g-CN, triazine-based g-C3N4 and heptazine-based g-C3N4. The stretching dynamics of these membranes was studied for deformations along their two main axes and at three different temperatures: 10K, 300K and 600K. We show that g-CN membranes have the lowest ultimate fracture strain value, followed by heptazine-based and triazine-based ones, respectively. This behavior can be explained in terms of their differences in terms of density values, topologies and types of chemical bonds. The dependency of the fracture patterns on the stretching directions is also discussed.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Graphene healing mechanisms: A theoretical investigation
Authors:
Tiago Botari,
Ricardo Paupitz,
Pedro Alves da Silva Autreto,
Douglas S Galvao
Abstract:
Large holes in graphene membranes were recently shown to heal, either at room temperature during a low energy STEM experiment, or by annealing at high temperatures. However, the details of the healing mechanism remain unclear. We carried out fully atomistic reactive molecular dynamics simulations in order to address these mechanisms under different experimental conditions. Our results show that, i…
▽ More
Large holes in graphene membranes were recently shown to heal, either at room temperature during a low energy STEM experiment, or by annealing at high temperatures. However, the details of the healing mechanism remain unclear. We carried out fully atomistic reactive molecular dynamics simulations in order to address these mechanisms under different experimental conditions. Our results show that, if a carbon atom source is present, high temperatures can provide enough energy for the carbon atoms to overcome the potential energy barrier and to produce perfect reconstruction of the graphene hexagonal structure. At room temperature, this perfect healing is only possible if the heat effects of the electron beam from STEM experiment are explicitly taken into account. The reconstruction process of a perfect or near perfect graphene structure involves the formation of linear carbon chains, as well as rings containing 5, 6, 7 and 8 atoms with planar (Stone-Wales) and non-planar (lump like) structures. These results shed light on the healing mechanism of graphene when subjected to different experimental conditions. Additionally, the methodology presented here can be useful for investigating the tailoring and manipulations of other nano-structures.
△ Less
Submitted 8 January, 2016;
originally announced January 2016.
-
A Brief Review on Syntheses, Structures and Applications of Nanoscrolls
Authors:
E. Perim,
L. D. Machado,
D. S. Galvao
Abstract:
Nanoscrolls are papyrus-like nanostructures which present unique properties due to their open ended morphology. These properties can be exploited in a plethora of technological applications, leading to the design of novel and interesting devices. During the past decade, significant advances in the synthesis and characterization of these structures have been made, but many challenges still remain.…
▽ More
Nanoscrolls are papyrus-like nanostructures which present unique properties due to their open ended morphology. These properties can be exploited in a plethora of technological applications, leading to the design of novel and interesting devices. During the past decade, significant advances in the synthesis and characterization of these structures have been made, but many challenges still remain. In this mini review we provide an overview on their history, experimental synthesis methods, basic properties and application perspectives.
△ Less
Submitted 22 January, 2015;
originally announced January 2015.
-
Mechanical Properties and Fracture Dynamics of Silicene Membranes
Authors:
T. Botari,
E. Perim,
P. A. S. Autreto,
A. C. T. van Duin,
R. Paupitz,
D. S. Galvao
Abstract:
As graphene became one of the most important materials today, there is a renewed interest on others similar structures. One example is silicene, the silicon analogue of graphene. It share some the remarkable graphene properties, such as the Dirac cone, but presents some distinct ones, such as a pronounced structural buckling. We have investigated, through density functional based tight-binding (DF…
▽ More
As graphene became one of the most important materials today, there is a renewed interest on others similar structures. One example is silicene, the silicon analogue of graphene. It share some the remarkable graphene properties, such as the Dirac cone, but presents some distinct ones, such as a pronounced structural buckling. We have investigated, through density functional based tight-binding (DFTB), as well as reactive molecular dynamics (using ReaxFF), the mechanical properties of suspended single-layer silicene. We calculated the elastic constants, analyzed the fracture patterns and edge reconstructions. We also addressed the stress distributions, unbuckling mechanisms and the fracture dependence on the temperature. We analysed the differences due to distinct edge morphologies, namely zigzag and armchair.
△ Less
Submitted 7 August, 2014;
originally announced August 2014.
-
Novel Nanoscroll Structures from Carbon Nitride Layers
Authors:
Eric Perim,
Douglas S. Galvao
Abstract:
Nanoscrolls (papyrus-like nanostructures) are very attractive structures for a variety of applications, due to their tunable diameter values and large accessible surface area. They have been successfully synthesized from different materials. In this work we have investigated, through fully atomistic molecular dynamics simulations, the dynamics of scroll formation for a series of graphenelike carbo…
▽ More
Nanoscrolls (papyrus-like nanostructures) are very attractive structures for a variety of applications, due to their tunable diameter values and large accessible surface area. They have been successfully synthesized from different materials. In this work we have investigated, through fully atomistic molecular dynamics simulations, the dynamics of scroll formation for a series of graphenelike carbon nitride (CN) twodimensional systems: gCN, triazinebased gC3N4, and heptazinebased gC3N4. Our results show that stable nanoscrolls can be formed for all of these structures. Possible synthetic routes to produce these nanostructures are also addressed.
△ Less
Submitted 23 May, 2014;
originally announced May 2014.
-
One-dimensional Silicon and Germanium Nanostructures With No Carbon Analogues
Authors:
Eric Perim,
Ricardo Paupitz,
Tiago Botari,
Douglas S. Galvao
Abstract:
In this work we report new silicon and germanium tubular nanostructures with no corresponding stable carbon analogues. The electronic and mechanical properties of these new tubes were investigated through ab initio methods. Our results show that the structures have lower energy than their corresponding nanoribbon structures and are stable up to high temperatures (500 and 1000 K, for silicon and ge…
▽ More
In this work we report new silicon and germanium tubular nanostructures with no corresponding stable carbon analogues. The electronic and mechanical properties of these new tubes were investigated through ab initio methods. Our results show that the structures have lower energy than their corresponding nanoribbon structures and are stable up to high temperatures (500 and 1000 K, for silicon and germanium tubes, respectively). Both tubes are semiconducting with small indirect band gaps, which can be significantly altered by both compressive and tensile strains. Large bandgap variations of almost 50% were observed for strain rates as small as 3%, suggesting possible applications in sensor devices. They also present high Young's modulus values (0.25 and 0.15 TPa, respectively). TEM images were simulated to help the identification of these new structures.
△ Less
Submitted 2 October, 2014; v1 submitted 9 March, 2014;
originally announced March 2014.
-
Violation of the Universal Behavior of Membranes Inside Cylindrical Tubes at Nanoscale
Authors:
E. Perim,
A. F. Fonseca,
N. M. Pugno,
D. S. Galvao
Abstract:
Recently, it was proposed based on classical elasticity theory and experiments at macroscale, that the conformations of sheets inside cylindrical tubes present a universal behavior. A natural question is whether this behavior still holds at nanoscale. Based on molecular dynamics simulations and analytical modeling for graphene and boron nitride membranes confined inside carbon nanotubes, we show t…
▽ More
Recently, it was proposed based on classical elasticity theory and experiments at macroscale, that the conformations of sheets inside cylindrical tubes present a universal behavior. A natural question is whether this behavior still holds at nanoscale. Based on molecular dynamics simulations and analytical modeling for graphene and boron nitride membranes confined inside carbon nanotubes, we show that the class of universality observed at macroscale is violated at nanoscale. The precise origins of these discrepancies is addressed and proven to be related to both surface and atomistic effects.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Correlation between Quantum Conductance and Atomic Arrangement of Silver Atomic-Size Nanowires
Authors:
M. J. Lagos,
P. A. S. Autreto,
D. S. Galvao,
D. Ugarte
Abstract:
We have studied the effect of thermal effects on the structural and transport response of Ag atomic-size nanowires generated by mechanical elongation. Our study involves both time-resolved atomic resolution transmission electron microscopy imaging and quantum conductance measurement using an ultra-high-vacuum mechanically controllable break junction. We have observed drastic changes in conductance…
▽ More
We have studied the effect of thermal effects on the structural and transport response of Ag atomic-size nanowires generated by mechanical elongation. Our study involves both time-resolved atomic resolution transmission electron microscopy imaging and quantum conductance measurement using an ultra-high-vacuum mechanically controllable break junction. We have observed drastic changes in conductance and structural properties of Ag nanowires generated at different temperatures (150 and 300 K). By combining electron microscopy images, electronic transport measurements and quantum transport calculations, we have been able to obtain a consistent correlation between the conductance and structural properties of Ag NWs. In particular, our study has revealed the formation of metastable rectangular rod-like Ag wire (3/3) along the (001) crystallographic direction, whose formation is enhanced. These results illustrate the high complexity of analyzing structural and quantum conductance behaviour of metal atomic-size wires; also, they reveal that it is extremely difficult to compare NW conductance experiments performed at different temperatures due to the fundamental modifications of the mechanical behavior.
△ Less
Submitted 12 June, 2012;
originally announced June 2012.
-
A Nonzero Gap Two-Dimensional Carbon Allotrope from Porous Graphene
Authors:
G. Brunetto,
P. A. S. Autreto,
L. D. Machado,
B. I. Santos,
R. P. B. dos Santos,
D. S. Galvão
Abstract:
Graphene is considered one of the most promising materials for future electronic. However, in its pristine form graphene is a gapless material, which imposes limitations to its use in some electronic applications. In order to solve this problem many approaches have been tried, such as, physical and chemical functionalizations. These processes compromise some of the desirable graphene properties. I…
▽ More
Graphene is considered one of the most promising materials for future electronic. However, in its pristine form graphene is a gapless material, which imposes limitations to its use in some electronic applications. In order to solve this problem many approaches have been tried, such as, physical and chemical functionalizations. These processes compromise some of the desirable graphene properties. In this work, based on ab initio quantum molecular dynamics, we showed that a two-dimensional carbon allotrope, named biphenylene carbon (BPC) can be obtained from selective dehydrogenation of porous graphene. BPC presents a nonzero bandgap and well-delocalized frontier orbitals. Synthetic routes to BPC are also addressed.
△ Less
Submitted 25 June, 2012; v1 submitted 30 May, 2012;
originally announced May 2012.
-
Carbon Nanotube with Square Cross-section: An Ab Initio Investigation
Authors:
P A S Autreto,
S B Legoas,
M Z S Flores,
D S Galvao
Abstract:
Recently, Lagos et al. (Nature Nanotechnology 4, 149 (2009)) reported the discovery of the smallest possible silver square cross-section nanotube. A natural question is whether similar carbon nanotubes can exist. In this work we report ab initio results for the structural, stability and electronic properties for such hypothetical structures. Our results show that stable (or at least metastable) st…
▽ More
Recently, Lagos et al. (Nature Nanotechnology 4, 149 (2009)) reported the discovery of the smallest possible silver square cross-section nanotube. A natural question is whether similar carbon nanotubes can exist. In this work we report ab initio results for the structural, stability and electronic properties for such hypothetical structures. Our results show that stable (or at least metastable) structures are possible with metallic properties. They also show that these structures can be obtained by a direct interconversion from SWNT(2,2). Large finite cubane-like oligomers, topologically related to these new tubes were also investigated.
△ Less
Submitted 4 October, 2010;
originally announced October 2010.
-
Curved Graphene Nanoribbons: Structure and Dynamics of Carbon Nanobelts
Authors:
B. V. C. Martins,
D. S. Galvão
Abstract:
Carbon nanoribbons (CNRs) are graphene (planar) structures with large aspect ratio. Carbon nanobelts (CNBs) are small graphene nanoribbons rolled up into spiral-like structures, i. e., carbon nanoscrolls (CNSs) with large aspect ratio. In this work we investigated the energetics and dynamical aspects of CNBs formed from rolling up CNRs. We have carried out molecular dynamics simulations using re…
▽ More
Carbon nanoribbons (CNRs) are graphene (planar) structures with large aspect ratio. Carbon nanobelts (CNBs) are small graphene nanoribbons rolled up into spiral-like structures, i. e., carbon nanoscrolls (CNSs) with large aspect ratio. In this work we investigated the energetics and dynamical aspects of CNBs formed from rolling up CNRs. We have carried out molecular dynamics simulations using reactive empirical bond-order potentials. Our results show that similarly to CNSs, CNBs formation is dominated by two major energy contribution, the increase in the elastic energy due to the bending of the initial planar configuration (decreasing structural stability) and the energetic gain due to van der Waals interactions of the overlap** surface of the rolled layers (increasing structural stability). Beyond a critical diameter value these scrolled structures can be even more stable (in terms of energy) than their equivalent planar configurations. In contrast to CNSs that require energy assisted processes (sonication, chemical reactions, etc.) to be formed, CNBs can be spontaneously formed from low temperature driven processes. Long CNBs (length of $\sim$ 30.0 nm) tend to exhibit self-folded racket-like conformations with formation dynamics very similar to the one observed for long carbon nanotubes. Shorter CNBs will be more likely to form perfect scrolled structures. Possible synthetic routes to fabricate CNBs from graphene membranes are also addressed.
△ Less
Submitted 5 February, 2010;
originally announced February 2010.
-
Structure-Activity Relationship Investigation of Some New Tetracyclines by Electronic Index Methodology
Authors:
Fernando Sato,
Scheila F. Braga,
Helio F. dos Santos,
Douglas S. Galvao
Abstract:
Tetracyclines are an old class of molecules that constitute a broad-spectrum antibiotics. Since the first member of tetracycline family were isolated, the clinical importance of these compounds as therapeutic and prophylactic agents against a wide range of infections has stimulated efforts to define their mode of action as inhibitors of bacterial reproduction. We used three SAR methodologies for…
▽ More
Tetracyclines are an old class of molecules that constitute a broad-spectrum antibiotics. Since the first member of tetracycline family were isolated, the clinical importance of these compounds as therapeutic and prophylactic agents against a wide range of infections has stimulated efforts to define their mode of action as inhibitors of bacterial reproduction. We used three SAR methodologies for the analysis of biological activity of a set of 104 tetracycline compounds. Our calculation were carried out using the semi-empirical Austin Method One (AM1) and Parametric Method 3 (PM3). Electronic Indices Methodology (EIM), Principal Component Analysis (PCA) and Artificial Neural Networks (ANN) were applied to the classification of 14 old and 90 new proposed derivatives of tetracyclines. Our results make evident the importance of EIM descriptors in pattern recognition and also show that the EIM can be effectively used to predict the biological activity of Tetracyclines.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
-
Origin of anomalously long interatomic distances in suspended gold chains
Authors:
Sergio B. Legoas,
Douglas S. Galvao,
Varlei Rodrigues,
Daniel Ugarte
Abstract:
The discovery of long bonds in gold atom chains has represented a challenge for physical interpretation. In fact, interatomic distances frequently attain 3.0-3.6 A values and, distances as large as 5.0 A may be seldom observed. Here, we studied gold chains by transmission electron microscopy and performed theoretical calculations using cluster ab initio density functional formalism. We show that…
▽ More
The discovery of long bonds in gold atom chains has represented a challenge for physical interpretation. In fact, interatomic distances frequently attain 3.0-3.6 A values and, distances as large as 5.0 A may be seldom observed. Here, we studied gold chains by transmission electron microscopy and performed theoretical calculations using cluster ab initio density functional formalism. We show that the insertion of two carbon atoms is required to account for the longest bonds, while distances above 3 A may be due to a mixture of clean and one C atom contaminated bonds.
△ Less
Submitted 7 January, 2002;
originally announced January 2002.