-
Axonemal regulation by curvature explains sperm flagellar waveform modulation
Authors:
Meurig T Gallagher,
Jackson C Kirkman-Brown,
David J Smith
Abstract:
Flagellar motility is critical to natural and many forms of assisted reproduction. Rhythmic beating and wave propagation by the flagellum propels sperm through fluid and enables modulation between penetrative progressive motion, activated side-to-side yaw and hyperactivated motility associated with detachment from epithelial binding. These motility changes occur in response to the properties of th…
▽ More
Flagellar motility is critical to natural and many forms of assisted reproduction. Rhythmic beating and wave propagation by the flagellum propels sperm through fluid and enables modulation between penetrative progressive motion, activated side-to-side yaw and hyperactivated motility associated with detachment from epithelial binding. These motility changes occur in response to the properties of the surrounding fluid environment, biochemical activation state, and physiological ligands, however a parsimonious mechanistic explanation of flagellar beat generation that can explain motility modulation is lacking. In this paper we present the Axonemal Regulation of Curvature, Hysteretic model (ARCH), a curvature control-type theory based on switching of active moment by local curvature, embedded within a geometrically nonlinear elastic model of the flagellum exhibiting planar flagellar beats, together with nonlocal viscous fluid dynamics. The biophysical system is parameterised completely by four dimensionless parameter grou**s. The effect of parameter variation is explored through computational simulation, revealing beat patterns that are qualitatively representative of penetrative (straight progressive), activated (highly yawing) and hyperactivated (non-progressive) modes. Anaylsis of the flagellar limit cycles and associated swimming velocity reveals a cusp catastrophe between progressive and non-progressive modes, and hysteresis in the response to changes in critical curvature parameter. Quantitative comparison to experimental data on human sperm exhibiting typical penetrative, activated and hyperactivated beats shows a good fit to the time-average absolute curvature profile along the flagellum, providing evidence that the model is capable of providing a framework for quantitative interpretation of imaging data.
△ Less
Submitted 1 March, 2023; v1 submitted 20 July, 2022;
originally announced July 2022.
-
Passively parallel regularized stokeslets
Authors:
Meurig T. Gallagher,
David J. Smith
Abstract:
Stokes flow, discussed by G.G. Stokes in 1851, describes many microscopic biological flow phenomena, including cilia-driven transport and flagellar motility; the need to quantify and understand these flows has motivated decades of mathematical and computational research. Regularized stokeslet methods, which have been used and refined over the past twenty years, offer significant advantages in simp…
▽ More
Stokes flow, discussed by G.G. Stokes in 1851, describes many microscopic biological flow phenomena, including cilia-driven transport and flagellar motility; the need to quantify and understand these flows has motivated decades of mathematical and computational research. Regularized stokeslet methods, which have been used and refined over the past twenty years, offer significant advantages in simplicity of implementation, with a recent modification based on nearest-neighbour interpolation providing significant improvements in efficiency and accuracy. Moreover this method can be implemented with the majority of the computation taking place through built-in linear algebra, entailing that state-of-the-art hardware and software developments in the latter, in particular multicore and GPU computing, can be exploited through minimal modifications ('passive parallelism') to existing MATLAB computer code. Hence, and with widely-available GPU hardware, significant improvements in the efficiency of the regularized stokeslet method can be obtained. The approach is demonstrated through computational experiments on three model biological flows: undulatory propulsion of multiple C. Elegans, simulation of progression and transport by multiple sperm in a geometrically confined region, and left-right symmetry breaking particle transport in the ventral node of the mouse embryo. In general an order-of-magnitude improvement in efficiency is observed. This development further widens the complexity of biological flow systems that are accessible without the need for extensive code development or specialist facilities.
△ Less
Submitted 31 March, 2020; v1 submitted 17 January, 2020;
originally announced January 2020.
-
Simulations of particle tracking in the oligociliated mouse node and implications for left-right symmetry breaking mechanics
Authors:
Meurig T. Gallagher,
Thomas D. Montenegro-Johnson,
David J. Smith
Abstract:
The concept of internal anatomical asymmetry is familiar; usually in humans the heart is on the left and the liver is on the right, however how does the develo** embryo know to produce this consistent laterality? Symmetry breaking initiates with left-right asymmetric cilia-driven fluid mechanics in a small fluid-filled structure called the ventral node in mice. However the question of what conve…
▽ More
The concept of internal anatomical asymmetry is familiar; usually in humans the heart is on the left and the liver is on the right, however how does the develo** embryo know to produce this consistent laterality? Symmetry breaking initiates with left-right asymmetric cilia-driven fluid mechanics in a small fluid-filled structure called the ventral node in mice. However the question of what converts this flow into left-right asymmetric development remains unanswered. A leading hypotheses is that flow transports morphogen containing vesicles within the node, the absorption of which results in asymmetrical gene expression. To investigate how vesicle transport might result in the situs patterns observed in wildtype and mutant experiments, we extend the open source Stokes flow package, NEAREST, to consider the hydrodynamic and Brownian motion of particles in a mouse model with flow driven by one, two, and 112 beating cilia. Three models for morphogen-containing particle released are simulated to assess their compatibility with observed results in oligociliated and wildtype mouse embryos: uniformly random release, localised cilium stress induced release, and localised release from motile cilia themselves. Only the uniformly random release model appears consistent with the data, with neither localised-release model resulting in significant transport in the oligociliated embryo.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
-
Doing more with less: the flagellar end piece enhances the propulsive effectiveness of human spermatozoa
Authors:
Cara V. Neal,
Atticus L. Hall-McNair,
Jackson Kirkman-Brown,
David J. Smith,
Meurig T. Gallagher
Abstract:
Spermatozoa self-propel by propagating bending waves along a predominantly active elastic flagellum. The organized structure of the "9 + 2" axoneme is lost in the most-distal few microns of the flagellum, and therefore this region is unlikely to have the ability to generate active bending; as such it has been largely neglected in biophysical studies. Through elastohydrodynamic modeling of human-li…
▽ More
Spermatozoa self-propel by propagating bending waves along a predominantly active elastic flagellum. The organized structure of the "9 + 2" axoneme is lost in the most-distal few microns of the flagellum, and therefore this region is unlikely to have the ability to generate active bending; as such it has been largely neglected in biophysical studies. Through elastohydrodynamic modeling of human-like sperm we show that an inactive distal region confers significant advantages, both in propulsive thrust and swimming efficiency, when compared with a fully active flagellum of the same total length. The beneficial effect of the inactive end piece on these statistics can be as small as a few percent but can be above 430%. The optimal inactive length, between 2-18% of the total length, depends on both wavenumber and viscous-elastic ratio, and therefore is likely to vary in different species. Potential implications in evolutionary biology and clinical assessment are discussed.
△ Less
Submitted 5 June, 2020; v1 submitted 3 October, 2019;
originally announced October 2019.
-
Efficient Implementation of Elastohydrodynamics via Integral Operators
Authors:
Atticus L. Hall-McNair,
Thomas D. Montenegro-Johnson,
Hermes Gadelha,
David J. Smith,
Meurig T. Gallagher
Abstract:
The dynamics of geometrically non-linear flexible filaments play an important role in a host of biological processes, from flagella-driven cell transport to the polymeric structure of complex fluids. Such problems have historically been computationally expensive due to numerical stiffness associated with the inextensibility constraint, as well as the often non-trivial boundary conditions on the go…
▽ More
The dynamics of geometrically non-linear flexible filaments play an important role in a host of biological processes, from flagella-driven cell transport to the polymeric structure of complex fluids. Such problems have historically been computationally expensive due to numerical stiffness associated with the inextensibility constraint, as well as the often non-trivial boundary conditions on the governing high-order PDEs. Formulating the problem for the evolving shape of a filament via an integral equation in the tangent angle has recently been found to greatly alleviate this numerical stiffness. The contribution of the present manuscript is to enable the simulation of non-local interactions of multiple filaments in a computationally efficient manner using the method of regularized stokeslets within this framework. The proposed method is benchmarked against a non-local bead and link model, and recent code utilizing a local drag velocity law. Systems of multiple filaments (1) in a background fluid flow, (2) under a constant body force, and (3) undergoing active self-motility are modeled efficiently. Buckling instabilities are analyzed by examining the evolving filament curvature, as well as by coarse-graining the body frame tangent angles using a Chebyshev approximation for various choices of the relevant non-dimensional parameters. From these experiments, insight is gained into how filament-filament interactions can promote buckling, and further reveal the complex fluid dynamics resulting from arrays of these interacting fibers. By examining active moment-driven filaments, we investigate the speed of worm- and sperm-like swimmers for different governing parameters. The MATLAB(R) implementation is made available as an open-source library, enabling flexible extension for alternate discretizations and different surrounding flows.
△ Less
Submitted 3 October, 2019; v1 submitted 8 March, 2019;
originally announced March 2019.
-
Non-identifiability of parameters for a class of shear-thinning rheological models, with implications for haematological fluid dynamics
Authors:
Meurig T. Gallagher,
Richard A. J. Wain,
Sonia Dari,
Justin P. Whitty,
David J. Smith
Abstract:
Choosing a suitable model and determining its associated parameters from fitting to experimental data is fundamental for many problems in biomechanics. Models of shear-thinning complex fluids, dating from the work of Bird, Carreau, Cross and Yasuda, have been applied in highly-cited computational studies of heamodynamics for several decades. In this manuscript we revisit these models, first to hig…
▽ More
Choosing a suitable model and determining its associated parameters from fitting to experimental data is fundamental for many problems in biomechanics. Models of shear-thinning complex fluids, dating from the work of Bird, Carreau, Cross and Yasuda, have been applied in highly-cited computational studies of heamodynamics for several decades. In this manuscript we revisit these models, first to highlight a degree of uncertainty in the naming conventions in the literature, but more importantly to address the problem of inferring model parameters by fitting rheology experiments. By refitting published data, and also by simulation, we find large, flat regions in likelihood surfaces that yield families of parameter sets which fit the data equally well. Despite having almost indistinguishable fits to experimental data these varying parameter sets can predict very different flow profiles, and as such these parameters cannot be used to draw conclusions about physical properties of the fluids, such as zero-shear viscosity or relaxation time of the fluid, or indeed flow behaviours. We verify that these features are not a consequence of the experimental data sets through simulations; by sampling points from the rheological models and adding a small amount of noise we create a synthetic data set which reveals that the problem of parameter identifiability is intrinsic to these models.
△ Less
Submitted 4 October, 2018;
originally announced October 2018.
-
Sharp quadrature error bounds for the nearest-neighbor discretization of the regularized stokeslet boundary integral equation
Authors:
Meurig T. Gallagher,
Debajyoti Choudhuri,
David J. Smith
Abstract:
The method of regularized stokeslets is a powerful numerical method to solve the Stokes flow equations for problems in biological fluid mechanics. A recent variation of this method incorporates a nearest-neighbor discretization to improve accuracy and efficiency while maintaining the ease-of-implementation of the original meshless method. This method contains three sources of numerical error, the…
▽ More
The method of regularized stokeslets is a powerful numerical method to solve the Stokes flow equations for problems in biological fluid mechanics. A recent variation of this method incorporates a nearest-neighbor discretization to improve accuracy and efficiency while maintaining the ease-of-implementation of the original meshless method. This method contains three sources of numerical error, the regularization error associated from using the regularized form of the boundary integral equations (with parameter $\varepsilon$), and two sources of discretization error associated with the force and quadrature discretizations (with lengthscales $h_f$ and $h_q$). A key issue to address is the quadrature error: initial work has not fully explained observed numerical convergence phenomena. In the present manuscript we construct sharp quadrature error bounds for the nearest-neighbor discretisation, noting that the error for a single evaluation of the kernel depends on the smallest distance ($δ$) between these discretization sets. The quadrature error bounds are described for two cases: with disjoint sets ($δ>0$) being close to linear in $h_q$ and insensitive to $\varepsilon$, and contained sets ($δ=0$) being quadratic in $h_q$ with inverse dependence on $\varepsilon$. The practical implications of these error bounds are discussed with reference to the condition number of the matrix system for the nearest-neighbor method, with the analysis revealing that the condition number is insensitive to $\varepsilon$ for disjoint sets, and grows linearly with $\varepsilon$ for contained sets. Error bounds for the general case ($δ\geq 0$) are revealed to be proportional to the sum of the errors for each case.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Modelling pulsatile blood flow through surgically coupled microvascular anastomoses
Authors:
Meurig T. Gallagher
Abstract:
The significant rates of post-operative arterial thrombus formation following the sutured anastomosis (surgical connection) of vessels in microvascular reconstruction has kindled the development of engineered solutions such as the UNILINK coupler. These devices reduce thrombosis rates, which recent numerical studies suggest to be due to decreases in shear strain rate across the anastomosis site wh…
▽ More
The significant rates of post-operative arterial thrombus formation following the sutured anastomosis (surgical connection) of vessels in microvascular reconstruction has kindled the development of engineered solutions such as the UNILINK coupler. These devices reduce thrombosis rates, which recent numerical studies suggest to be due to decreases in shear strain rate across the anastomosis site when compared to sutured vessels. In this work we develop and analytically solve the first mathematical model for the problem of microvascular anastomosis, leading to the discovery that the rates of thrombosis using these surgical coupling devices could be further reduced by decreasing the gradient of the wall deformation at the join.
△ Less
Submitted 17 April, 2018; v1 submitted 13 April, 2018;
originally announced April 2018.
-
Meshfree and efficient modelling of swimming cells
Authors:
Meurig T. Gallagher,
David J. Smith
Abstract:
Locomotion in Stokes flow is an intensively-studied problem because it describes important biological phenomena such as the motility of many species' sperm, bacteria, algae and protozoa. Numerical computations can be challenging, particularly in three dimensions, due to the presence of moving boundaries and complex geometries; methods which combine ease-of-implementation and computational efficien…
▽ More
Locomotion in Stokes flow is an intensively-studied problem because it describes important biological phenomena such as the motility of many species' sperm, bacteria, algae and protozoa. Numerical computations can be challenging, particularly in three dimensions, due to the presence of moving boundaries and complex geometries; methods which combine ease-of-implementation and computational efficiency are therefore needed. A recently-proposed method to discretise the regularised Stokeslet boundary integral equation without the need for a connected 'mesh' is applied to the inertialess locomotion problem in Stokes flow. The mathematical formulation and key aspects of the computational implementation in MATLAB/GNU Octave are described, followed by numerical experiments with biflagellate algae and multiple uniflagellate sperm swimming between no-slip surfaces, for which both swimming trajectories and flow fields are calculated. These computational experiments required minutes of time on modest hardware; an extensible implementation is provided in a github repository. The nearest neighbour discretisation dramatically improves convergence and robustness, a key challenge in extending the regularised Stokeslet method to complicated, three dimensional, biological fluid problems.
△ Less
Submitted 11 May, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
Model-based image analysis of a tethered Brownian fibre for shear stress sensing
Authors:
Meurig Thomas Gallagher,
Cara Victoria Neal,
Kenton P. Arkill,
David John Smith
Abstract:
The measurement of shear stress acting on a biologically relevant surface is a challenging problem, particularly in the complex environment of, for example, the vasculature. While an experimental method for the direct detection of wall shear stress via the imaging of a synthetic biology nanorod has recently been developed, the data interpretation so far has been limited to phenomenological random…
▽ More
The measurement of shear stress acting on a biologically relevant surface is a challenging problem, particularly in the complex environment of, for example, the vasculature. While an experimental method for the direct detection of wall shear stress via the imaging of a synthetic biology nanorod has recently been developed, the data interpretation so far has been limited to phenomenological random walk modelling, small angle approximation, and image analysis techniques which do not take into account the production of an image from a 3D subject. In this report we develop a mathematical and statistical framework to estimate shear stress from rapid imaging sequences based firstly on stochastic modelling of the dynamics of a tethered Brownian fibre in shear flow, and secondly on novel model-based image analysis, which reconstructs phage positions by solving the inverse problem of image formation. This framework is tested on experimental data, providing the first mechanistically rational analysis of the novel assay. What follows further develops the established theory for an untethered particle in a semi-dilute suspension, which is of relevance to, for example, the study of Brownian nanowires without flow, and presents new ideas in the field of multidisciplinary image analysis.
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
