-
A Review of the Accuracy of Direct Numerical Simulation Tools for the Simulation of Non-Spherical Bubble Collapses
Authors:
Mandeep Saini,
Lucas Prouvost,
Stephane Popinet,
Daniel Fuster
Abstract:
Numerical methods for the simulation of cavitation processes have been developed for more than 50 years. The rich variety of physical phenomena triggered by the collapse of a bubble has several applications in medicine and environmental science but requires the development of sophisticated numerical methods able to capture the presence of sharp interfaces between fluids and solid/elastic materials…
▽ More
Numerical methods for the simulation of cavitation processes have been developed for more than 50 years. The rich variety of physical phenomena triggered by the collapse of a bubble has several applications in medicine and environmental science but requires the development of sophisticated numerical methods able to capture the presence of sharp interfaces between fluids and solid/elastic materials, the generation of shock waves and the development of non-spherical modes. One important challenge faced by numerical methods is the important temporal and scale separation inherent to the process of bubble collapse, where many effects become predominant during very short time lapses around the instant of minimum radius when the simulations are hardly resolved. In this manuscript, we provide a detailed discussion of the parameters controlling the accuracy of direct numerical simulation in general non-spherical cases, where a new theoretical analysis is presented to generalize existing theories on the prediction of the peak pressures reached inside the bubble during the bubble collapse. We show that the ratio between the gridsize and the minimum radius allows us to scale the numerical errors introduced by the numerical method in the estimation of different relevant quantities for a variety of initial conditions.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Direct numerical simulations of microlayer formation during heterogeneous bubble nucleation
Authors:
Mandeep Saini,
Xiang Bin Chen,
Stephane Zaleski,
Daniel Fuster
Abstract:
In this article, we present direct numerical simulation results for the expansion of spherical cap bubbles attached to a rigid wall due to a sudden drop in the ambient pressure. The critical pressure drop beyond which the bubble growth becomes unstable is found to match well with the predictions from classical theory of heterogeneous nucleation imposing a quasi-static bubble evolution. When the pr…
▽ More
In this article, we present direct numerical simulation results for the expansion of spherical cap bubbles attached to a rigid wall due to a sudden drop in the ambient pressure. The critical pressure drop beyond which the bubble growth becomes unstable is found to match well with the predictions from classical theory of heterogeneous nucleation imposing a quasi-static bubble evolution. When the pressure drop is significantly higher than the critical value, a liquid microlayer appears between the bubble and the wall. In this regime, the interface outside the microlayer grows at an asymptotic velocity that can be predicted from the Rayleigh--Plesset equation, while the contact line evolves with another asymptotic velocity that scales with a visco-capillary velocity that obeys the Cox--Voinov law. In general, three distinctive regions can be distinguished: the region very close to the contact line where dynamics is governed by visco-capillary effects, an intermediate region controlled by inertio-viscous effects away from the contact line yet inside the viscous boundary layer, and the region outside the boundary layer dominated by inertial effects. The microlayer forms in a regime where the capillary effects are confined in a region much smaller than the viscous boundary layer thickness. In this regime, the global capillary number takes values much larger then the critical capillary number for bubble nucleation, and the microlayer height is controlled by viscous effects and not surface tension.
△ Less
Submitted 27 May, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
Finite speed of sound effects on asymmetry in multibubble cavitation
Authors:
Mandeep Saini,
Youssef Saade,
Daniel Fuster,
Detlef Lohse
Abstract:
Three-dimensional direct numerical simulations (DNS) are used to revisit the experiments on multibubble cavitation performed by Bremond et al. (https://doi.org/10.1063/1.2396922, Phys. Fluids 18, 121505 (2006), https://doi.org/10.1103/PhysRevLett.96.224501, Phys. Rev. Lett. 96, 224501 (2006)). In particular, we aim at understanding the asymmetry observed therein during the expansion and collapse o…
▽ More
Three-dimensional direct numerical simulations (DNS) are used to revisit the experiments on multibubble cavitation performed by Bremond et al. (https://doi.org/10.1063/1.2396922, Phys. Fluids 18, 121505 (2006), https://doi.org/10.1103/PhysRevLett.96.224501, Phys. Rev. Lett. 96, 224501 (2006)). In particular, we aim at understanding the asymmetry observed therein during the expansion and collapse of bubble clusters subjected to a pressure pulse. Our numerical simulations suggest that the asymmetry is due to the force applied by the imposed pressure pulse and it is a consequence of the finite effective speed of sound in the liquid. By comparing our numerical results to the experiments, we found that the effective speed of sound under the experimental conditions was smaller than that of degassed water due to microbubbles in the system which resulted from prior cavitation experiments in the same setup. The estimated values of the effective speed of sound are consistent with those derived from the classical theory of wave propagation in liquids with small amounts of gas. To support this theory, we also present evidence of tiny bubbles remaining in the liquid bulk as a result of the fragmentation of large bubbles during the prior cavitation experiments. Furthermore, we find that this asymmetry also alters the direction of the liquid jet generated during the last stages of bubble collapse.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Effects of non-condensable gas on laser-induced cavitation bubbles
Authors:
Davide Bernardo Preso,
Daniel Fuster,
Armand Baptiste Sieber,
Mohamed Farhat
Abstract:
This study presents experimental observations of single laser-induced cavitation bubbles collapsing in water with different levels of air saturation. The average trends of the bubble size reveal a clear yet little dependence of the energy dissipation at collapse on the water gas content. Similarly, the observed trend of luminescence energy at collapse varies within the investigated range of air sa…
▽ More
This study presents experimental observations of single laser-induced cavitation bubbles collapsing in water with different levels of air saturation. The average trends of the bubble size reveal a clear yet little dependence of the energy dissipation at collapse on the water gas content. Similarly, the observed trend of luminescence energy at collapse varies within the investigated range of air saturation levels, in agreement with findings in similar works. We argue that perturbations in bubble shape may amplify with decreasing air saturation, consequently affecting light emission.
△ Less
Submitted 27 January, 2024;
originally announced January 2024.
-
Vapor compression and energy dissipation in a collapsing laser-induced bubble
Authors:
Davide Bernardo Preso,
Daniel Fuster,
Armand Baptiste Sieber,
Danail Obreschkow,
Mohamed Farhat
Abstract:
The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the vapor contained in a bubble on its collapse. We find that the higher vapor pressure of more concentrated aqueous ammonia acts as a resistance to…
▽ More
The composition of the gaseous phase of cavitation bubbles and its role on the collapse remains to date poorly understood. In this work, experiments of single cavitation bubbles in aqueous ammonia serve as a novel approach to investigate the effect of the vapor contained in a bubble on its collapse. We find that the higher vapor pressure of more concentrated aqueous ammonia acts as a resistance to the collapse, reducing the total energy dissipation. In line with visual observation, acoustic measurements, and luminescence recordings, it is also observed that higher vapor pressures contribute to a more spherical collapse, likely hindering the growth of interface instabilities by decreasing the collapse velocities and accelerations. Remarkably, we evidence a strong difference between the effective dam** and the energy of the shock emission, suggesting that the latter is not the dominant dissipation mechanism at collapse as predicted from classical correction models accounting for slightly compressible liquids. Furthermore, our results suggest that the vapor inside collapsing bubbles gets compressed, consistently with previous studies performed in the context of single bubble sonoluminescence, addressing the question about the ability of vapors to readily condense during a bubble collapse in similar regimes. These findings provide insights into the identification of the influence of the bubble content and the energy exchanges of the bubble with its surrounding media, eventually paving the way to a more efficient use of cavitation in engineering and biomedical applications.
△ Less
Submitted 22 March, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
On the dynamics of a collapsing bubble in contact with a rigid wall
Authors:
M Saini,
E Tanne,
M Arrigoni,
S Zaleski,
D Fuster
Abstract:
This work reveals that the dynamic response of a spherical cap bubble in contact with a rigid wall depends on the effective contact angle at the instant prior to collapse. This parameter allows us to discriminate between two regimes in which the mechanisms of interaction between the collapsing bubble and its surrounding medium differ significantly: When the contact angle is smaller than 90 degrees…
▽ More
This work reveals that the dynamic response of a spherical cap bubble in contact with a rigid wall depends on the effective contact angle at the instant prior to collapse. This parameter allows us to discriminate between two regimes in which the mechanisms of interaction between the collapsing bubble and its surrounding medium differ significantly: When the contact angle is smaller than 90 degrees a classical jet directed towards the wall is observed whereas if the initial contact angle is larger than 90 degrees an annular re-entrant jet parallel to the wall appears. We show that this change of the behaviour can be explained using the impulse potential flow theory for small times which shows the presence of a singularity on the initial acceleration of the contact line when the contact angle is larger then 90 degrees. Direct Numerical Simulations show that although viscosity regularises the solution at $t > 0$, the solution remains singular at $t=0$. In these circumstances numerical and experimental results show that the collapse of flat bubbles can eventually lead to the formation of a vortex ring that unexpectedly induces long-range effects. The role of the bubble geometry at the instant of maximum expansion on the overall collapse process is shown to be well captured by the impulse potential flow theory, which can be easily generalised to other bubble shapes. These results may find direct application in the interpretation of geophysical flows as well as the control and design of bio-medical, naval, manufacturing and sonochemistry applications.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Finite amplitude wave propagation through bubbly fluids
Authors:
Siew-Wan Ohl,
Juan Manuel Rossello,
Daniel Fuster,
Claus-Dieter Ohl
Abstract:
The existence of only a few bubbles could drastically reduce the acoustic wave speed in a liquid. Wood's equation models the linear sound speed, while the speed of an ideal shock waves is derived as a function of the pressure ratio across the shock. The common finite amplitude waves lie, however, in between these limits. We show that in a bubbly medium, the high frequency components of finite ampl…
▽ More
The existence of only a few bubbles could drastically reduce the acoustic wave speed in a liquid. Wood's equation models the linear sound speed, while the speed of an ideal shock waves is derived as a function of the pressure ratio across the shock. The common finite amplitude waves lie, however, in between these limits. We show that in a bubbly medium, the high frequency components of finite amplitude waves are attenuated and dissipate quickly, but a low frequency part remains. This wave is then transmitted by the collapse of the bubbles and its speed decreases with increasing void fraction. We demonstrate that the linear and the shock wave regimes can be smoothly connected through a Mach number based on the collapse velocity of the bubbles.
△ Less
Submitted 21 August, 2023;
originally announced August 2023.
-
A multigrid solver for the coupled pressure-temperature equations in an all-Mach solver with VoF
Authors:
Youssef Saade,
Detlef Lohse,
Daniel Fuster
Abstract:
We present a generalisation of the all-Mach solver of Fuster & Popinet (2018) to account for heat diffusion between two different compressible phases. By solving a two-way coupled system of equations for pressure and temperature, the current code is shown to increase the robustness and accuracy of the solver with respect to classical explicit discretization schemes. Different test cases are propos…
▽ More
We present a generalisation of the all-Mach solver of Fuster & Popinet (2018) to account for heat diffusion between two different compressible phases. By solving a two-way coupled system of equations for pressure and temperature, the current code is shown to increase the robustness and accuracy of the solver with respect to classical explicit discretization schemes. Different test cases are proposed to validate the implementation of the thermal effects: an Epstein-Plesset like problem for temperature is shown to compare well with a spectral method solution. The code also reproduces free small amplitude oscillations of a spherical bubble where analytical solutions capturing the transition between isothermal and adiabatic regimes are available. We show results of a single sonoluminescent bubble (SBSL) in standing waves, where the result of the DNS is compared with that of other methods in the literature. Moreover, the Rayleigh collapse problem is studied in order to evaluate the importance of thermal effects on the peak pressures reached during the collapse of spherical bubbles. Finally, the collapse of a bubble near a rigid boundary is studied reporting the change of heat flux as a function of the stand-off distance.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Regressing bubble cluster dynamics as a disordered many-body system
Authors:
Kazuki Maeda,
Daniel Fuster
Abstract:
The coherent dynamics of bubble clusters in liquid are of fundamental and industrial importance and are elusive due to the complex interactions of disordered bubble oscillations. Here we introduce and demonstrate unsupervised learning of the coherent physics by combining theory and principal component analysis. From data, the method extracts and quantifies coherent dynamical features based on thei…
▽ More
The coherent dynamics of bubble clusters in liquid are of fundamental and industrial importance and are elusive due to the complex interactions of disordered bubble oscillations. Here we introduce and demonstrate unsupervised learning of the coherent physics by combining theory and principal component analysis. From data, the method extracts and quantifies coherent dynamical features based on their energy. We analyze simulation data sets of disordered clusters under harmonic excitation. Results suggest that the coherence is lowered by polydispersity and nonlinearity but in cavitating regimes underlying correlations can be isolated in a single cohererent mode characterized by mean-field interactions, regardless of the degree of disorders. Our study provides a valuable tool and a guidance for future studies on cavitation and nucleation in theory, simulation, and experiments.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Statistics of drops generated from ensembles of randomly corrugated ligaments
Authors:
Sagar Pal,
Cesar Pairetti,
Marco Crialesi-Esposito,
Daniel Fuster,
Stéphane Zaleski
Abstract:
The size of drops generated by the capillary-driven disintegration of liquid ligaments plays a fundamental role in several important natural phenomena, ranging from heat and mass transfer at the ocean-atmosphere interface to pathogen transmission. The inherent non-linearity of the equations governing the ligament destabilization leads to significant differences in the resulting drop sizes, owing t…
▽ More
The size of drops generated by the capillary-driven disintegration of liquid ligaments plays a fundamental role in several important natural phenomena, ranging from heat and mass transfer at the ocean-atmosphere interface to pathogen transmission. The inherent non-linearity of the equations governing the ligament destabilization leads to significant differences in the resulting drop sizes, owing to small fluctuations in the myriad initial conditions. Previous experiments and simulations reveal a variety of drop size distributions, corresponding to competing underlying physical interpretations. Here, we perform numerical simulations of individual ligaments, the deterministic breakup of which is triggered by random initial surface corrugations. The simulations are grouped in a large ensemble, each corresponding to a random initial configuration. The resulting probability distributions reveal three stable drop sizes, generated via a sequence of two distinct stages of breakup. Four different distributions are tested, volume-based Poisson, Gaussian, Gamma and Log-Normal. Depending on the time, range of droplet sizes and criteria for success, each distribution has successes and failures. However the Log-Normal distribution roughly describes the data when fitting both the primary peak and the tail of the distribution while the number of droplets generated is the highest, while the Gamma and Log-Normal distributions perform equally well when fitting the tail. The study demonstrates a precisely controllable and reproducible framework, which can be employed to investigate the mechanisms responsible for the polydispersity of drop sizes found in complex fluid fragmentation scenarios.
△ Less
Submitted 3 June, 2024; v1 submitted 30 June, 2021;
originally announced June 2021.
-
Vorticity Production at Fluid Interfaces in Two-dimensional Flows
Authors:
Maurice Rossi,
Daniel Fuster
Abstract:
This work revisits the production of vorticity at an interface separating two immiscible incompressible fluids. A new decomposition of the vorticity flux is proposed in a two-dimensional context which allows to compute explicitly such a quantity in terms of surface tension $σ$, viscosity $μ$ and gravity $g$. This approach is then applied in the context of gravito-capillary waves. It leads to analy…
▽ More
This work revisits the production of vorticity at an interface separating two immiscible incompressible fluids. A new decomposition of the vorticity flux is proposed in a two-dimensional context which allows to compute explicitly such a quantity in terms of surface tension $σ$, viscosity $μ$ and gravity $g$. This approach is then applied in the context of gravito-capillary waves. It leads to analytical results already known but from a new perspective, provides some quantitative predictions at short time that can be a good test for numerical codes. Finally it is a mean to obtain a qualitative understanding of direct numerical simulation results.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
A novel momentum-conserving, mass-momentum consistent method for interfacial flows involving large density contrasts
Authors:
Sagar Pal,
Daniel Fuster,
Stéphane Zaleski
Abstract:
We propose a novel method for the direct numerical simulation of interfacial flows involving large density contrasts, using a Volume-of-Fluid method. We employ the conservative formulation of the incompressible Navier-Stokes equations for immiscible fluids in order to ensure consistency between the discrete transport of mass and momentum in both fluids. This strategy is implemented on a uniform 3D…
▽ More
We propose a novel method for the direct numerical simulation of interfacial flows involving large density contrasts, using a Volume-of-Fluid method. We employ the conservative formulation of the incompressible Navier-Stokes equations for immiscible fluids in order to ensure consistency between the discrete transport of mass and momentum in both fluids. This strategy is implemented on a uniform 3D Cartesian grid with a staggered configuration of primitive variables, wherein a geometrical reconstruction based mass advection is carried out on a grid twice as fine as that for the momentum. The implementation is in the spirit of Rudman (1998) [41], coupled with the extension of the direction-split time integration scheme of Weymouth & Yue (2010) [46] to that of conservative momentum transport. The resulting numerical method ensures discrete consistency between the mass and momentum propagation, while simultaneously enforcing conservative numerical transport to arbitrary levels of precision in 3D. We present several quantitative comparisons with benchmarks from existing literature in order to establish the accuracy of the method, and henceforth demonstrate its stability and robustness in the context of a complex turbulent interfacial flow configuration involving a falling raindrop in air.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
PArallel, Robust, Interface Simulator (PARIS)
Authors:
W. Aniszewski,
T. Arrufat,
M. Crialesi-Esposito,
S. Dabiri,
D. Fuster,
Y. Ling,
J. Lu,
L. Malan,
S. Pal,
R. Scardovelli,
G. Tryggvason,
P. Yecko,
S. Zaleski
Abstract:
Paris (PArallel, Robust, Interface Simulator) is a finite volume code for simulations of immiscible multifluid or multiphase flows. It is based on the "one-fluid" formulation of the Navier-Stokes equations where different fluids are treated as one material with variable properties, and surface tension is added as a singular interface force. The fluid equations are solved on a regular structured st…
▽ More
Paris (PArallel, Robust, Interface Simulator) is a finite volume code for simulations of immiscible multifluid or multiphase flows. It is based on the "one-fluid" formulation of the Navier-Stokes equations where different fluids are treated as one material with variable properties, and surface tension is added as a singular interface force. The fluid equations are solved on a regular structured staggered grid using an explicit projection method with a first-order or second-order time integration scheme. The interface separating the different fluids is tracked by a Front-Tracking (FT) method, where the interface is represented by connected marker points, or by a Volume-of-Fluid (VOF) method, where the marker function is advected directly on the fixed grid. Paris is written in Fortran95/2002 and parallelized using MPI and domain decomposition. It is based on several earlier FT or VOF codes such as Ftc3D, Surfer or Gerris. These codes and similar ones, as well as Paris, have been used to simulate a wide range of multifluid and multiphase flows.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
A mass-momentum consistent, Volume-of-Fluid method for incompressible flow on staggered grids
Authors:
T. Arrufat,
M. Crialesi-Esposito,
D. Fuster,
Y. Ling,
L. Malan,
S. Pal,
R. Scardovelli,
G. Tryggvason,
S. Zaleski
Abstract:
The computation of flows with large density contrasts is notoriously difficult. To alleviate the difficulty we consider a discretization of the Navier-Stokes equation that advects mass and momentum in a consistent manner. Incompressible flow with capillary forces is modeled and the discretization is performed on a staggered grid of Marker and Cell type. The Volume-of-Fluid method is used to track…
▽ More
The computation of flows with large density contrasts is notoriously difficult. To alleviate the difficulty we consider a discretization of the Navier-Stokes equation that advects mass and momentum in a consistent manner. Incompressible flow with capillary forces is modeled and the discretization is performed on a staggered grid of Marker and Cell type. The Volume-of-Fluid method is used to track the interface and a Height-Function method is used to compute surface tension. The advection of the volume fraction is performed using either the Lagrangian-Explicit / CIAM (Calcul d'Interface Affine par Morceaux) method or the Weymouth and Yue (WY) Eulerian-Implicit method. The WY method conserves fluid mass to machine accuracy provided incompressibility is satisfied. To improve the stability of these methods momentum fluxes are advected in a manner "consistent" with the volume-fraction fluxes, that is a discontinuity of the momentum is advected at the same speed as a discontinuity of the density. To find the density on the staggered cells on which the velocity is centered, an auxiliary reconstruction of the density is performed. The method is tested for a droplet without surface tension in uniform flow, for a droplet suddenly accelerated in a carrying gas at rest at very large density ratio without viscosity or surface tension, for the Kelvin-Helmholtz instability, for a 3mm-diameter falling raindrop and for an atomizing flow in air-water conditions.
△ Less
Submitted 24 February, 2021; v1 submitted 29 November, 2018;
originally announced November 2018.
-
A two-phase mixing layer between parallel gas and liquid streams: multiphase turbulence statistics and influence of interfacial instability
Authors:
Y. Ling,
D. Fuster,
G. Tryggvason,
S. Zaleski
Abstract:
The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast atomizers in fuel injection systems and breaking waves in the ocean. The velocity difference between the gas and liquid streams triggers an interfacial instabilit…
▽ More
The two-phase mixing layer formed between parallel gas and liquid streams is an important fundamental problem in turbulent multiphase flows. The problem is relevant to many industrial applications and natural phenomena, such as air-blast atomizers in fuel injection systems and breaking waves in the ocean. The velocity difference between the gas and liquid streams triggers an interfacial instability which can be convective or absolute depending on the stream properties and injection parameters. In the present study, a direct numerical simulation of a two-phase gas-liquid mixing layer that lie in the absolute instability regime is conducted. A dominant frequency is observed in the simulation and the numerical result agrees well with the prediction from viscous stability theory. As the interfacial wave plays a critical role in turbulence transition and development, the temporal evolution of turbulent fluctuations (such as the enstrophy) also exhibits a similar frequency. In order to investigate the statistical response of the multiphase turbulence flow, the simulation has been run for a long physical time so that time-averaging can be performed to yield the statistically converged results for Reynolds stresses and the turbulent kinetic energy (TKE) budget. An extensive mesh refinement study using from 8 million to about 4 billions cells has been carried out. The turbulent dissipation is shown to be highly demanding on mesh resolution compared to other terms in TKE budget. The results obtained with the finest mesh are shown to be not far from converged results of turbulent dissipation which allow us to obtain estimations of the Kolmogorov and Hinze scales. The computed Hinze scale is significantly larger than the size of droplets observed and does not seem to be a relevant length scale to describe the smallest size of droplets formed in atomization.
△ Less
Submitted 6 August, 2018;
originally announced August 2018.
-
Spray formation: a numerical closeup
Authors:
Yue Ling,
Daniel Fuster,
Gretar Tryggvason,
Stephane Zaleski
Abstract:
Spray formation and atomization in a gas-liquid mixing layer is an important fundamental problem of multiphase flows. It is highly desirable to visualize the detailed atomization process and to analyze the instabilities and mechanisms involved, and massive numerical simulations are required, in addition to experiment. Rapid development of numerical methods and computer technology in the past decad…
▽ More
Spray formation and atomization in a gas-liquid mixing layer is an important fundamental problem of multiphase flows. It is highly desirable to visualize the detailed atomization process and to analyze the instabilities and mechanisms involved, and massive numerical simulations are required, in addition to experiment. Rapid development of numerical methods and computer technology in the past decades now allows large-scale three-dimensional direct numerical simulations of atomization to be performed. Nevertheless, the fundamental question, whether all the physical scales involved in the primary breakup process are faithfully resolved, remains unclear. In the present study, we conduct direct numerical simulations of spray formation in a gas-liquid mixing layer with state-of-the-art computational resources (using up to 4 billion cells and 16384 cores), in order to obtain a high-fidelity numerical closeup of the detailed mechanisms of spray formation. We also aim to examine whether present computational resources are sufficient for a fully resolved direct numerical simulation of atomization.
△ Less
Submitted 11 July, 2016; v1 submitted 13 November, 2015;
originally announced November 2015.
-
Direct numerical simulations of capillary wave turbulence
Authors:
Luc Deike,
Daniel Fuster,
Michaël Berhanu,
Eric Falcon
Abstract:
This work presents Direct Numerical Simulations of capillary wave turbulence solving the full 3D Navier Stokes equations of a two-phase flow. When the interface is locally forced at large scales, a statistical stationary state appears after few forcing periods. Smaller wave scales are generated by nonlinear interactions, and the wave height spectrum is found to obey a power law in both wave number…
▽ More
This work presents Direct Numerical Simulations of capillary wave turbulence solving the full 3D Navier Stokes equations of a two-phase flow. When the interface is locally forced at large scales, a statistical stationary state appears after few forcing periods. Smaller wave scales are generated by nonlinear interactions, and the wave height spectrum is found to obey a power law in both wave number and frequency in good agreement with weak turbulence theory. By estimating the mean energy flux from the dissipated power, the Kolmogorov-Zakharov constant is evaluated and found to be compatible with the exact theoretical value. The time scale separation between linear, nonlinear interaction and dissipative times is also observed. These numerical results confirm the validity of weak turbulence approach to quantify out-of equilibrium wave statistics.
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Physics of beer tap**
Authors:
Javier Rodriguez-Rodriguez,
Almudena Casado-Chacon,
Daniel Fuster
Abstract:
The popular bar prank known in colloquial English as beer tap** consists in hitting the top of a beer bottle with a solid object, usually another bottle, to trigger the foaming over of the former within a few seconds. Despite the trick being known for long time, to the best of our knowledge, the phenomenon still lacks scientific explanation. Although it seems natural to think that shock-induced…
▽ More
The popular bar prank known in colloquial English as beer tap** consists in hitting the top of a beer bottle with a solid object, usually another bottle, to trigger the foaming over of the former within a few seconds. Despite the trick being known for long time, to the best of our knowledge, the phenomenon still lacks scientific explanation. Although it seems natural to think that shock-induced cavitation enhances the diffusion of CO$_2$ from the supersaturated bulk liquid into the bubbles by breaking them up, the subtle mechanism by which this happens remains unknown. Here we show that the overall foaming-over process can be divided into three stages where different physical phenomena take place in different time-scales, namely: bubble-collapse (or cavitation) stage, diffusion-driven stage and buoyancy-driven stage. In the bubble-collapse stage, the impact generates a train of expansion-compression waves in the liquid that leads to the fragmentation of pre-existing gas cavities. Upon bubble fragmentation, the sudden increase of the interface-area-to-volume ratio enhances mass transfer significantly, which makes the bubble volume grow by a large factor until CO$_2$ is locally depleted. At that point buoyancy takes over, making the bubble clouds rise and eventually form buoyant vortex rings whose volume grows fast due to the feedback between the buoyancy-induced rising speed and the advection-enhanced CO$_2$ transport from the bulk liquid to the bubble. The physics behind this explosive process might also be connected to some geological phenomena.
△ Less
Submitted 8 November, 2014; v1 submitted 11 March, 2014;
originally announced March 2014.
-
Why does a beer bottle foam up after a sudden impact on its mouth?
Authors:
Javier Rodríguez-Rodríguez,
Almudena Casado,
Daniel Fuster
Abstract:
A sudden vertical impact on the mouth of a beer bottle generates a compression wave that propagates through the glass towards the bottom. When this wave reaches the base of the bottle, it is transmitted to the liquid as an expansion wave that travels to free surface, where it bounces back as a compression wave. This train of expansion-compression waves drives the forced cavitation of existing air…
▽ More
A sudden vertical impact on the mouth of a beer bottle generates a compression wave that propagates through the glass towards the bottom. When this wave reaches the base of the bottle, it is transmitted to the liquid as an expansion wave that travels to free surface, where it bounces back as a compression wave. This train of expansion-compression waves drives the forced cavitation of existing air pockets, leading to their violent collapse. A cloud of very small daughter bubbles are generated upon these collapses, that expand much faster than their mothers due to their smaller size. These rapidly growing bubble clusters effectively act as buoyancy sources, what leads to the formation of bubble-laden plumes whose void fraction increases quickly by several orders of magnitude, eventually turning most of the liquid into foam.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.