-
Picometer Sensitive Prototype of the Optical Truss Interferometer for LISA
Authors:
Kylan Jersey,
Harold Hollis,
Han-Yu Chia,
Jose Sanjuan,
Paul Fulda,
Guido Mueller,
Felipe Guzman
Abstract:
The optical truss interferometer (OTI) is a contingent subsystem proposed for the LISA telescopes to aid in the verification of a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ optical path length stability. Each telescope would be equipped with three pairs of compact fiber-coupled units, each forming an optical cavity with a baseline proportional to the telescope length at different points around the…
▽ More
The optical truss interferometer (OTI) is a contingent subsystem proposed for the LISA telescopes to aid in the verification of a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ optical path length stability. Each telescope would be equipped with three pairs of compact fiber-coupled units, each forming an optical cavity with a baseline proportional to the telescope length at different points around the aperture. Employing a Pound-Drever-Hall approach to maintain a modulated laser field on resonance with each cavity, the dimensional stability of the telescope can be measured and verified. We have designed and developed prototype OTI units to demonstrate the capability of measuring stable structures, such as the LISA telescope, with a $1 \frac{\mathrm{pm}}{\sqrt{\mathrm{Hz}}}$ sensitivity using a set of freely mountable fiber-injected cavities. Aside from its initial motivation for the telescope, the OTI can also be readily integrated with other systems to aid in ground testing experiments. In this paper, we outline our experimental setup, measurement results, and analyses of the noise limitations.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
LIGO operates with quantum noise below the Standard Quantum Limit
Authors:
Wenxuan Jia,
Victoria Xu,
Kevin Kuns,
Masayuki Nakano,
Lisa Barsotti,
Matthew Evans,
Nergis Mavalvala,
Rich Abbott,
Ibrahim Abouelfettouh,
Rana Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Naoki Aritomi,
Stuart Aston,
Matthew Ball,
Stefan Ballmer,
David Barker,
Beverly Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Nina Bode,
Edgard Bonilla,
Vladimir Bossilkov
, et al. (146 additional authors not shown)
Abstract:
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan…
▽ More
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Experimental demonstrations of alignment and mode matching in optical cavities with higher-order Hermite-Gauss modes
Authors:
Liu Tao,
Paul Fulda
Abstract:
Higher-order spatial laser modes have recently been investigated as candidates for reducing test-mass thermal noise in ground-based gravitational-wave detectors such as advanced LIGO. In particular, higher-order Hermite-Gauss (HG) modes have gained attention within the community for their more robust behaviors against random test-mass surface deformations and stronger sensing and control capacitie…
▽ More
Higher-order spatial laser modes have recently been investigated as candidates for reducing test-mass thermal noise in ground-based gravitational-wave detectors such as advanced LIGO. In particular, higher-order Hermite-Gauss (HG) modes have gained attention within the community for their more robust behaviors against random test-mass surface deformations and stronger sensing and control capacities. In this letter we offer experimental investigations on various aspects of HG mode interferometry. We have generated purified HG modes up to the 12-th order $\mathrm{HG}_{6,6}$ mode, with a power conversion efficiency of 38.8% and 27.7% for the $\mathrm{HG}_{3,3}$ and $\mathrm{HG}_{6,6}$ modes respectively. We demonstrated for the first time the misalignment and mode mismatch-induced power coupling loss measurements for HG modes up to the $\mathrm{HG}_{6,6}$. We report an excellent agreement with the extended numerical power loss factors that in the ``small power loss'' region converge to $2n+1$ or $n^2+n+1$ for a misaligned or mode mismatched $\mathrm{HG}_{n,n}$ mode. We also demonstrated the wavefront sensing (WFS) signal measurement for HG modes up to the $\mathrm{HG}_{6,6}$. The measurement result is accurately in accordance with theoretical WFS gain $β_{n,n-1}\sqrt{n} + β_{n,n+1}\sqrt{n+1}$ for an $\mathrm{HG}_{n,n}$ mode, with $β_{n,n-1}$ being the beat coefficient of the adjacent $\mathrm{HG}_{n,n}$ and $\mathrm{HG}_{n-1,n}$ modes on a split photodetector.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Beam displacement tolerances on a segmented mirror for higher-order Hermite-Gauss modes
Authors:
Liu Tao,
Nina Brown,
Paul Fulda
Abstract:
Odd-indexed higher-order Hermite-Gauss (HG) modes are compatible with 4-quadrant segmented mirrors due to their intensity nulls along the principal axes, which guarantees minimum beam intensity illuminating the bond lines between the segments thus leading to low power loss. However, a misplaced HG beam can cause extra power loss due to the bright intensity spots probing the bond lines. This paper…
▽ More
Odd-indexed higher-order Hermite-Gauss (HG) modes are compatible with 4-quadrant segmented mirrors due to their intensity nulls along the principal axes, which guarantees minimum beam intensity illuminating the bond lines between the segments thus leading to low power loss. However, a misplaced HG beam can cause extra power loss due to the bright intensity spots probing the bond lines. This paper analytically and numerically studies the beam displacement tolerances on a segmented mirror for the $\mathrm{HG_{3,3}}$ mode. We conclude that for "effective" bond lines with 6 $μ$m width, and the $\mathrm{HG_{3,3}}$ beam size chosen to guarantee 1 ppm clip** loss when centered, the beam can be rotated by roughly 1 degree or laterally displaced by 4% of its beam size while kee** the total power on the bond lines under 1 ppm. We also demonstrate that the constrained beam displacement parameter region that guarantees a given power loss limit, or the beam displacement tolerance, is inversely proportional to the bond line thickness.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Misalignment and mode mismatch error signals for higher-order Hermite-Gauss modes from two sensing schemes
Authors:
Liu Tao,
Anna C. Green,
Paul Fulda
Abstract:
The locking of lasers to optical cavities is ubiquitously required in the field of precision interferometry such as Advanced LIGO to yield optimal sensitivity. Using higher-order Hermite-Gauss (HG) modes for the main interferometer beam has been a topic of recent study, due to their potential for reducing thermal noise of the test masses. It has been shown however that higher-order HG modes are mo…
▽ More
The locking of lasers to optical cavities is ubiquitously required in the field of precision interferometry such as Advanced LIGO to yield optimal sensitivity. Using higher-order Hermite-Gauss (HG) modes for the main interferometer beam has been a topic of recent study, due to their potential for reducing thermal noise of the test masses. It has been shown however that higher-order HG modes are more susceptible to coupling losses into optical cavities: the misalignment and mode mismatch induced power losses scale as $2n+1$ and $n^{2}+n+1$ respectively with $n$ being the mode index. In this paper we calculate analytically for the first time the alignment and mode mismatch sensing signals for arbitrary higher-order HG modes with both the traditional sensing schemes (using Gouy phase telescopes and quadrant photodetectors) and the more recently proposed radio-frequency jitter-based sensing schemes (using only single element photodiodes). We show that the sensing signals and also the signal-to-shot noise ratios for higher-order HG modes are larger than for the fundamental mode. In particular, the alignment and mode mismatch sensing signals in the traditional sensing schemes scale approximately as $\sqrt{n}$ and $n$ respectively, whereas in the jitter-based sensing schemes they scale exactly as $2n+1$ and $n^{2}+n+1$, respectively, which exactly matches the decrease in their respective tolerances. This potentially mitigates the downside of higher-order HG modes for their suffering from excessive misalignment and mode-mismatch induced power losses.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Detection of Gravitational memory effect in LISA using triggers from ground-based detectors
Authors:
Sourath Ghosh,
Alexander Weaver,
Jose Sanjuan,
Paul Fulda,
Guido Mueller
Abstract:
The LIGO-Virgo-Kagra (LVK) collaboration has detected gravitational waves from 90 Compact Binary Coalescences. In addition to fortifying the linearized theory of General Relativity (GR), the statistical ensemble of detections also provides prospects of detecting nonlinear effects predicted by GR, one such prediction being the nonlinear gravitational memory effect. For detected stellar and intermed…
▽ More
The LIGO-Virgo-Kagra (LVK) collaboration has detected gravitational waves from 90 Compact Binary Coalescences. In addition to fortifying the linearized theory of General Relativity (GR), the statistical ensemble of detections also provides prospects of detecting nonlinear effects predicted by GR, one such prediction being the nonlinear gravitational memory effect. For detected stellar and intermediate mass compact binaries, the induced strain from the memory effect is one or two orders below the detector noise background. Additionally, since most of the energy is radiated at merger the strain induced by the memory effect resembles a step function at the merger time. These facts motivate the idea of coherently stacking up data streams from recorded GW events at these merger times so that the cumulative memory strain is detected with a sufficient SNR. GW detectors essentially record the integrated strain response at time scales of the round trip light travel time, making future space-based long arm interferometers like LISA ideal for detecting the memory effect at low frequencies. In this paper, we propose a method that uses the event catalog of ground-based detectors and searches for corresponding memory strains in the LISA data stream. Given LVK's O3 science run catalog, we use scaling arguments and assumptions on the source population models to estimate the run time required for LISA to accumulate a memory SNR of 5, using triggers from current and future ground-based detectors. Finally, we extend these calculations for using beyond LISA missions like ALIA, AMIGO, and Folkner to detect the gravitational memory effect. The results for LISA indicate a possible detection of the memory effect within the 10 year LISA mission lifetime and the corresponding results for beyond LISA missions are even more promising.
△ Less
Submitted 8 February, 2023;
originally announced February 2023.
-
Calculating the precision of tilt-to-length coupling estimation and noise subtraction in LISA using Fisher information
Authors:
Daniel George,
Jose Sanjuan,
Paul Fulda,
Guido Mueller
Abstract:
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase noise using time-delay interferometry (TDI). We present here a frequency domain model that describes the effect of angular motion of all three spacecraft on the in…
▽ More
Tilt-to-length (TTL) noise from angular jitter in LISA is projected to be the dominant noise source in the milli-Hertz band unless corrected in post-processing. The correction is only possible after removing the overwhelming laser phase noise using time-delay interferometry (TDI). We present here a frequency domain model that describes the effect of angular motion of all three spacecraft on the interferometric signals after propagating through TDI. We then apply a Fisher information matrix analysis to this model to calculate the minimum uncertainty with which TTL coupling coefficients may be estimated. Furthermore, we show the impact of these uncertainties on the residual TTL noise in the gravitational wave readout channel, and compare it to the impact of the angular witness sensors' readout noise. We show that the residual TTL noise post-subtraction in the TDI variables for a case using the LISA angular jitter requirement and integration time of one day is limited to the 8\,pm/$\sqrt{\rm Hz}$ level by angular sensing noise. However, using a more realistic model for the angular jitter we find that the TTL coupling uncertainties are 70 times larger, and the noise subtraction is limited by these uncertainties to the 14\,pm/$\sqrt{\rm Hz}$ level.
△ Less
Submitted 31 August, 2022;
originally announced August 2022.
-
Point Absorber Limits to Future Gravitational-Wave Detectors
Authors:
W. Jia,
H. Yamamoto,
K. Kuns,
A. Effler,
M. Evans,
P. Fritschel,
R. Abbott,
C. Adams,
R. X. Adhikari,
A. Ananyeva,
S. Appert,
K. Arai,
J. S. Areeda,
Y. Asali,
S. M. Aston,
C. Austin,
A. M. Baer,
M. Ball,
S. W. Ballmer,
S. Banagiri,
D. Barker,
L. Barsotti,
J. Bartlett,
B. K. Berger,
J. Betzwieser
, et al. (176 additional authors not shown)
Abstract:
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some hig…
▽ More
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some high-power cavity experiments, for example, the Advanced LIGO gravitational wave detector. In this Letter, we present a general approach to the point absorber effect from first principles and simulate its contribution to the increased scattering. The achievable circulating power in current and future gravitational-wave detectors is calculated statistically given different point absorber configurations. Our formulation is further confirmed experimentally in comparison with the scattered power in the arm cavity of Advanced LIGO measured by in-situ photodiodes. The understanding presented here provides an important tool in the global effort to design future gravitational wave detectors that support high optical power, and thus reduce quantum noise.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
LIGOs Quantum Response to Squeezed States
Authors:
L. McCuller,
S. E. Dwyer,
A. C. Green,
Haocun Yu,
L. Barsotti,
C. D. Blair,
D. D. Brown,
A. Effler,
M. Evans,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
N. Kijbunchoo,
G. L. Mansell,
F. Matichard,
N. Mavalvala,
D. E. McClelland,
T. McRae,
A. Mullavey,
D. Sigg,
B. J. J. Slagmolen,
M. Tse,
T. Vo,
R. L. Ward,
C. Whittle
, et al. (172 additional authors not shown)
Abstract:
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth…
▽ More
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Point absorbers in Advanced LIGO
Authors:
Aidan F. Brooks,
Gabriele Vajente,
Hiro Yamamoto,
Rich Abbott,
Carl Adams,
Rana X. Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Joseph S. Areeda,
Yasmeen Asali,
Stuart M. Aston,
Corey Austin,
Anne M. Baer,
Matthew Ball,
Stefan W. Ballmer,
Sharan Banagiri,
David Barker,
Lisa Barsotti,
Jeffrey Bartlett,
Beverly K. Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Sebastien Biscans
, et al. (176 additional authors not shown)
Abstract:
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro…
▽ More
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.
△ Less
Submitted 25 March, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Improving the Robustness of the Advanced LIGO Detectors to Earthquakes
Authors:
Eyal Schwartz,
A Pele,
J Warner,
B Lantz,
J Betzwieser,
K L Dooley,
S Biscans,
M Coughlin,
N Mukund,
R Abbott,
C Adams,
R X Adhikari,
A Ananyeva,
S Appert,
K Arai,
J S Areeda,
Y Asali,
S M Aston,
C Austin,
A M Baer,
M Ball,
S W Ballmer,
S Banagiri,
D Barker,
L Barsotti
, et al. (174 additional authors not shown)
Abstract:
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti…
▽ More
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μ\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Quantum correlation measurements in interferometric gravitational wave detectors
Authors:
D. V. Martynov,
V. V. Frolov,
S. Kandhasamy,
K. Izumi,
H. Miao,
N. Mavalvala,
E. D. Hall,
R. Lanza,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
C. Adams,
R. X. Adhikari,
S. B. Anderson,
A. Ananyeva,
S. Appert,
K. Arai,
S. M. Aston,
S. W. Ballmer,
D. Barker,
B. Barr,
L. Barsotti,
J. Bartlett,
I. Bartos,
J. C. Batch
, et al. (177 additional authors not shown)
Abstract:
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the…
▽ More
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer for the first time.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
Small optic suspensions for Advanced LIGO input optics and other precision optical experiments
Authors:
G. Ciani,
M. A. Arain,
S. M. Aston,
D. Feldbaum,
P. Fulda,
J. Gleason,
M. Heintze,
R. M. Martin,
C. L. Mueller,
D. M. Nanda Kumar,
A. Pele,
D. H. Reitze,
P. Sainathan,
D. B. Tanner,
L. F. Williams,
G. Mueller
Abstract:
We report on the design and performance of small optic suspensions developed to suppress seismic motion of out-of-cavity optics in the Input Optics subsystem of the Advanced LIGO interferometric gravitational wave detector. These compact single stage suspensions provide isolation in all six degrees of freedom of the optic, local sensing and actuation in three of them, and passive dam** for the o…
▽ More
We report on the design and performance of small optic suspensions developed to suppress seismic motion of out-of-cavity optics in the Input Optics subsystem of the Advanced LIGO interferometric gravitational wave detector. These compact single stage suspensions provide isolation in all six degrees of freedom of the optic, local sensing and actuation in three of them, and passive dam** for the other three.
△ Less
Submitted 29 June, 2016;
originally announced June 2016.
-
Analytical calculation of Hermite-Gauss and Laguerre-Gauss modes on a bullseye photodiode
Authors:
Charlotte Bond,
Paul Fulda,
Andreas Freise
Abstract:
This note describes the analytical derivation of the response of bullseye detectors to optical beats between higher-order spatial modes of the Laguerre-Gauss form, and subsequently the Hermite-Gauss form. Also included is a comparison with numerically calculated beat coefficients, and a simple example of the use of the resulting beat coefficients in simulating a mode mismatch sensor for a Fabry-Pe…
▽ More
This note describes the analytical derivation of the response of bullseye detectors to optical beats between higher-order spatial modes of the Laguerre-Gauss form, and subsequently the Hermite-Gauss form. Also included is a comparison with numerically calculated beat coefficients, and a simple example of the use of the resulting beat coefficients in simulating a mode mismatch sensor for a Fabry-Perot cavity.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
The Sensitivity of the Advanced LIGO Detectors at the Beginning of Gravitational Wave Astronomy
Authors:
D. V. Martynov,
E. D. Hall,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
C. Adams,
R. X. Adhikari,
R. A. Anderson,
S. B. Anderson,
K. Arai,
M. A. Arain,
S. M. Aston,
L. Austin,
S. W. Ballmer,
M. Barbet,
D. Barker,
B. Barr,
L. Barsotti,
J. Bartlett,
M. A. Barton,
I. Bartos,
J. C. Batch,
A. S. Bell,
I. Belopolski,
J. Bergman
, et al. (239 additional authors not shown)
Abstract:
The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than…
▽ More
The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than $10^{-23}/\sqrt{\text{Hz}}$ was achieved around 100 Hz. Understanding both the fundamental and the technical noise sources was critical for increasing the observable volume in the universe. The average distance at which coalescing binary black hole systems with individual masses of 30 $M_\odot$ could be detected was 1.3 Gpc. Similarly, the range for binary neutron star inspirals was about 75 Mpc. With respect to the initial detectors, the observable volume of Universe increased respectively by a factor 69 and 43. These improvements allowed Advanced LIGO to detect the gravitational wave signal from the binary black hole coalescence, known as GW150914.
△ Less
Submitted 10 February, 2018; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
The Advanced LIGO Input Optics
Authors:
Chris Mueller,
Muzammil Arain,
Giacomo Ciani,
Ryan DeRosa,
Anamaria Effler,
David Feldbaum,
Valery Frolov,
Paul Fulda,
Joseph Gleason,
Matthew Heintze,
Eleanor King,
Keiko Kokeyama,
William Korth,
Rodica Martin,
Adam Mullavey,
Jan Poeld,
Volker Quetschke,
David Reitze,
David Tanner,
Luke Williams,
Guido Mueller
Abstract:
The Advanced LIGO gravitational wave detectors are nearing their design sensitivity and should begin taking meaningful astrophysical data in the fall of 2015. These resonant optical interferometers will have unprecedented sensitivity to the strains caused by passing gravitational waves. The input optics play a significant part in allowing these devices to reach such sensitivities. Residing between…
▽ More
The Advanced LIGO gravitational wave detectors are nearing their design sensitivity and should begin taking meaningful astrophysical data in the fall of 2015. These resonant optical interferometers will have unprecedented sensitivity to the strains caused by passing gravitational waves. The input optics play a significant part in allowing these devices to reach such sensitivities. Residing between the pre-stabilized laser and the main interferometer, the input optics is tasked with preparing the laser beam for interferometry at the sub-attometer level while operating at continuous wave input power levels ranging from 100 mW to 150 W. These extreme operating conditions required every major component to be custom designed. These designs draw heavily on the experience and understanding gained during the operation of Initial LIGO and Enhanced LIGO. In this article we report on how the components of the input optics were designed to meet their stringent requirements and present measurements showing how well they have lived up to their design.
△ Less
Submitted 20 January, 2016;
originally announced January 2016.
-
In-situ characterization of the thermal state of resonant optical interferometers via tracking of their higher-order mode resonances
Authors:
Chris L. Mueller,
Paul Fulda,
Rana X. Adhikari,
Koji Arai,
Aidan F. Brooks,
Rijuparna Chakraborty,
Valery V. Frolov,
Peter Fritschel,
Eleanor J. King,
David B. Tanner,
Hiroaki Yamamoto,
Guido Mueller
Abstract:
Thermal lensing in resonant optical interferometers such as those used for gravitational wave detection is a concern due to the negative impact on control signals and instrument sensitivity. In this paper we describe a method for monitoring the thermal state of such interferometers by probing the higher-order spatial mode resonances of the cavities within them. We demonstrate the use of this techn…
▽ More
Thermal lensing in resonant optical interferometers such as those used for gravitational wave detection is a concern due to the negative impact on control signals and instrument sensitivity. In this paper we describe a method for monitoring the thermal state of such interferometers by probing the higher-order spatial mode resonances of the cavities within them. We demonstrate the use of this technique to measure changes in the Advanced LIGO input mode cleaner cavity geometry as a function of input power, and subsequently infer the optical absorption at the mirror surfaces at the level of 1 ppm per mirror. We also demonstrate the generation of a useful error signal for thermal state of the Advanced LIGO power recycling cavity by continuously tracking the first order spatial mode resonance frequency. Such an error signal could be used as an input to thermal compensation systems to maintain the interferometer cavity geometries in the presence of transients in circulating light power levels, thereby maintaining optimal sensitivity and maximizing the duty-cycle of the detectors.
△ Less
Submitted 8 February, 2015;
originally announced February 2015.
-
Comparing Finesse simulations, analytical solutions and OSCAR simulations of Fabry-Perot alignment signals
Authors:
Stefan Ballmer,
Jerome Degallaix,
Andreas Freise,
Paul Fulda
Abstract:
This document records the results of a comparison of the interferometer simulation Finesse against an analytic (MATLAB based) calculation of the alignment sensing signals of a Fabry Perot cavity. This task was started during the commissioning workshop at the LIGO Livingston site between the 28.1. and 1.02 2013 with the aim of creating a reference example for validating numerical simulation tools.…
▽ More
This document records the results of a comparison of the interferometer simulation Finesse against an analytic (MATLAB based) calculation of the alignment sensing signals of a Fabry Perot cavity. This task was started during the commissioning workshop at the LIGO Livingston site between the 28.1. and 1.02 2013 with the aim of creating a reference example for validating numerical simulation tools. The FFT based simulation OSCAR joined the battle later.
△ Less
Submitted 22 January, 2014;
originally announced January 2014.
-
Feedback control of optical beam spatial profiles using thermal lensing
Authors:
Zhanwei Liu,
Paul Fulda,
Muzammil A. Arain,
Luke Williams,
Guido Mueller,
David B. Tanner,
David H. Reitze
Abstract:
A method for active control of the spatial profile of a laser beam using adaptive thermal lensing is described. A segmented electrical heater was used to generate thermal gradients across a transmissive optical element, resulting in a controllable thermal lens. The segmented heater also allows the generation of cylindrical lenses, and provides the capability to steer the beam in both horizontal an…
▽ More
A method for active control of the spatial profile of a laser beam using adaptive thermal lensing is described. A segmented electrical heater was used to generate thermal gradients across a transmissive optical element, resulting in a controllable thermal lens. The segmented heater also allows the generation of cylindrical lenses, and provides the capability to steer the beam in both horizontal and vertical planes. Using this device as an actuator, a feedback control loop was developed to stabilize the beam size and position.
△ Less
Submitted 20 May, 2013;
originally announced May 2013.
-
Phase effects due to beam misalignment on diffraction gratings
Authors:
Deepali Lodhia,
Daniel Brown,
Frank Brueckner,
Ludovico Carbone,
Paul Fulda,
Keiko Kokeyama,
Andreas Freise
Abstract:
All-reflective interferometer configurations have been proposed for the next generation of gravitational wave detectors, with diffractive elements replacing transmissive optics. However, an additional phase noise creates more stringent conditions for alignment stability. A framework for alignment stability with the use of diffractive elements was required using a Gaussian model. We successfully cr…
▽ More
All-reflective interferometer configurations have been proposed for the next generation of gravitational wave detectors, with diffractive elements replacing transmissive optics. However, an additional phase noise creates more stringent conditions for alignment stability. A framework for alignment stability with the use of diffractive elements was required using a Gaussian model. We successfully create such a framework involving modal decomposition to replicate small displacements of the beam (or grating) and show that the modal model does not contain the phase changes seen in an otherwise geometric planewave approach. The modal decomposition description is justified by verifying experimentally that the phase of a diffracted Gaussian beam is independent of the beam shape, achieved by comparing the phase change between a zero-order and first-order mode beam. To interpret our findings we employ a rigorous time-domain simulation to demonstrate that the phase changes resulting from a modal decomposition are correct, provided that the coordinate system which measures the phase is moved simultaneously with the effective beam displacement. This indeed corresponds to the phase change observed in the geometric planewave model. The change in the coordinate system does not instinctively occur within the analytical framework, and therefore requires either a manual change in the coordinate system or an addition of the geometric planewave phase factor.
△ Less
Submitted 27 March, 2013;
originally announced March 2013.
-
Generation of high-purity higher-order Laguerre-Gauss beams at high laser power
Authors:
L. Carbone,
C. Bogan,
P. Fulda,
A. Freise,
B. Willke
Abstract:
We have investigated the generation of highly pure higher-order Laguerre-Gauss (LG) beams at high laser power of order 100W, the same regime that will be used by 2nd generation gravitational wave interferometers such as Advanced LIGO. We report on the generation of a helical type LG33 mode with a purity of order 97% at a power of 83W, the highest power ever reported in literature for a higher-orde…
▽ More
We have investigated the generation of highly pure higher-order Laguerre-Gauss (LG) beams at high laser power of order 100W, the same regime that will be used by 2nd generation gravitational wave interferometers such as Advanced LIGO. We report on the generation of a helical type LG33 mode with a purity of order 97% at a power of 83W, the highest power ever reported in literature for a higher-order LG mode.
△ Less
Submitted 14 March, 2013;
originally announced March 2013.
-
Computer-games for gravitational wave science outreach: Black Hole Pong and Space Time Quest
Authors:
L. Carbone,
C. Bond,
D. Brown,
F. Brueckner,
K. Grover,
D. Lodhia,
C. M. F. Mingarelli,
P. Fulda,
R. J. E. Smith,
R. Unwin,
A. Vecchio,
M. Wang,
L. Whalley,
A. Freise
Abstract:
We have established a program aimed to the development of small computer applications and web applets to be used for educational purposes and to teach gravitational waves physics and technology, and for the general gravitational wave outreach activities. The computer programs are generated in collaboration with undergraduates and summer students as part of our teaching activities, and are freely d…
▽ More
We have established a program aimed to the development of small computer applications and web applets to be used for educational purposes and to teach gravitational waves physics and technology, and for the general gravitational wave outreach activities. The computer programs are generated in collaboration with undergraduates and summer students as part of our teaching activities, and are freely distributed on a dedicated website. As part of this program, we have developed two computer-games related to gravitational wave science: 'Black Hole Pong' and 'Space Time Quest'. In this article we overview our computer related outreach activity, present and discuss the games and their educational aspects, and report on some positive feedback received.
△ Less
Submitted 13 March, 2012; v1 submitted 16 November, 2011;
originally announced November 2011.