Showing 1–50 of 55 results for author: Francis, K

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Software Compensation for Highly Granular Calorimeters using Machine Learning

Authors: S. Lai, J. Utehs, A. Wilhahn, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Göttlicher, O. Hartbrich, D. Heuchel, A. Irles, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza, M. Reinecke, F. Sefkow, S. Schuwalow, M. De Silva, Y. Sudo, H. L. Tran, E. Buhmann, E. Garutti, S. Huck , et al. (39 additional authors not shown)

Abstract: A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy w… ▽ More A neural network for software compensation was developed for the highly granular CALICE Analogue Hadronic Calorimeter (AHCAL). The neural network uses spatial and temporal event information from the AHCAL and energy information, which is expected to improve sensitivity to shower development and the neutron fraction of the hadron shower. The neural network method produced a depth-dependent energy weighting and a time-dependent threshold for enhancing energy deposits consistent with the timescale of evaporation neutrons. Additionally, it was observed to learn an energy-weighting indicative of longitudinal leakage correction. In addition, the method produced a linear detector response and outperformed a published control method regarding resolution for every particle energy studied. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Single-Shot Local Measurement of Terahertz Correlated Second Harmonic Generation in Laser Air Plasma Filaments

Authors: Mervin Lim Pac Chong, Kareem J. Garriga Francis, Yiwen E, Xi-Cheng Zhang

Abstract: We present a single-shot detection method of terahertz-correlated second harmonic generation in plasma-based sources by directly mixing an optical probe into femtosecond laser-induced plasma filaments in air. The single-shot second harmonic trace is obtained by measuring second harmonic generation on a conventional CCD with a spatio-temporally distorted probe beam. The system shows a spectrometer… ▽ More We present a single-shot detection method of terahertz-correlated second harmonic generation in plasma-based sources by directly mixing an optical probe into femtosecond laser-induced plasma filaments in air. The single-shot second harmonic trace is obtained by measuring second harmonic generation on a conventional CCD with a spatio-temporally distorted probe beam. The system shows a spectrometer resolution of 22 fs/pixel on the CCD and a true resolution on the order of the probe pulse duration. With considerable THz peak electric field strengths, this formalism can open the door to single-shot THz detection without bandwidth limitations. △ Less

Submitted 20 October, 2023; originally announced October 2023.

Investigation of enhanced second harmonic generation in laser-induced air plasma

Authors: Shing Yiu Fu, Kareem J. Garriga Francis, Mervin Lim Pac Chong, Yiwen E, X. -C. Zhang

Abstract: We report a systematic investigation into the processes behind a near hundredfold enhanced second harmonic wave generated from a laser-induced air plasma, by examining the temporal dynamics of the frequency conversion processes, and the polarization of the emitted second harmonic beam. Contrary to typical nonlinear optical processes, the enhanced second harmonic generation efficiency is only obser… ▽ More We report a systematic investigation into the processes behind a near hundredfold enhanced second harmonic wave generated from a laser-induced air plasma, by examining the temporal dynamics of the frequency conversion processes, and the polarization of the emitted second harmonic beam. Contrary to typical nonlinear optical processes, the enhanced second harmonic generation efficiency is only observed within a sub-picosecond time window and found to be nearly constant across fundamental pulse durations spanning from 0.1 ps to over 2 ps. We further demonstrate that with the adopted orthogonal pump-probe configuration, the polarization of second harmonic field exhibits a complex dependence on the polarization of both input fundamental beams, contrasting with most of the previous experiments with a single-beam geometry. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Development of a hardened THz energy meter for use on the kilojoule-scale, short-pulse OMEGA EP laser

Authors: G. Bruhaug, H. G. Rinderknecht, Y. E, M. S. Wei, R. B. Brannon, D. Guy, R. G. Peck, N. Landis, G. Brent, R. Fairbanks, C. McAtee, T. Walker, T. Buczek, M. Krieger, M. H. Romanofsky, C. Mileham, K. G. Francis, X. C. Zhang, G. W. Collins, J. R. Rygg

Abstract: A highly adaptable and robust THz energy meter has been designed and implemented to detect energetic THz pulses from high intensity (greater than 1E18 watts per square centimeter) laser plasma interactions on OMEGA EP. THz radiation from the laser driven target is detected by a shielded pyrometer. A second identical pyrometer is used for background subtraction. The detector can be configured to de… ▽ More A highly adaptable and robust THz energy meter has been designed and implemented to detect energetic THz pulses from high intensity (greater than 1E18 watts per square centimeter) laser plasma interactions on OMEGA EP. THz radiation from the laser driven target is detected by a shielded pyrometer. A second identical pyrometer is used for background subtraction. The detector can be configured to detect THz pulses in the 1 mm to 30 microns (0.3 to 10 THz) range and pulse energies from joules to microjoules via changes in filtration, aperture size and position. Additional polarization selective filtration can also be used to determine THz pulse polarization. The design incorporates significant radiation and EMP shielding to survive and operate within the OMEGA EP radiation environment. We describe the design, operational principle, calibration and testing of the THz energy meter. The pyrometers were calibrated using a benchtop laser and show linear sensitivity up to 1000 nJ of absorbed energy. Initial results from four OMEGA EP THz experiments detected up to 15 microjoules at the detector, which can correspond to 100s of mJ depending on THz emission and reflection models. △ Less

Submitted 18 January, 2023; v1 submitted 8 November, 2022; originally announced November 2022.

Cryogenic front-end amplifier design for large SiPM arrays in the DUNE FD1-HD photon detection system

Authors: C. Brizzolari, P. Carniti, C. Cattadori, E. Cristaldo, A. de la Torre Rojo, M. Delgado, A. Falcone, K. Francis, N. Gallice, C. Gotti, M. Guarise, E. Montagna, A. Montanari, G. Pessina, M. Pozzato, J. Smolik, F. Terranova, L. Tomassetti, A. Verdugo de Osa, D. Warner, J. Zalesak, A. Zani, J. Zuklin, V. Zutshi

Abstract: The photon detection system of the first far detector (FD1-HD) of the DUNE experiment will detect scintillation photons produced by particle interactions in a kiloton-scale liquid Argon time projection chamber. The photon detectors of choice are silicon photomultipliers (SiPM), 6$\times$6 mm$^2$ each, arranged in groups of 48, which present a significantly low impedance to the front-end electronic… ▽ More The photon detection system of the first far detector (FD1-HD) of the DUNE experiment will detect scintillation photons produced by particle interactions in a kiloton-scale liquid Argon time projection chamber. The photon detectors of choice are silicon photomultipliers (SiPM), 6$\times$6 mm$^2$ each, arranged in groups of 48, which present a significantly low impedance to the front-end electronics. This paper details the design of a cryogenic amplifier with exceptionally low white voltage noise of 0.37 nV$\sqrt{Hz}$, based on a silicon-germanium input transistor and a BiCMOS fully differential operational amplifier. It yields excellent single photoelectron resolution even at low overvoltage values. The signal rise time is below 100 ns, and the dynamic range is about 2000 photoelectrons at the typical operating overvoltage. It draws 0.7 mA from a single 3.3 V supply, for a power consumption of 2.4 mW per channel. Simplified models were developed to predict the single photolectron signal shape and the signal to noise ratio, with a good match to measured performance. △ Less

Submitted 14 November, 2022; v1 submitted 27 July, 2022; originally announced July 2022.

Journal ref: JINST 17 P11017 (2022)

Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, B. Ali-Mohammadzadeh, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo , et al. (1203 additional authors not shown)

Abstract: The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char… ▽ More The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation. △ Less

Submitted 17 July, 2023; v1 submitted 29 June, 2022; originally announced June 2022.

Comments: 39 pages, 20 figures. Accepted version. Published version available in Eur. Phys. J. C 83, 618 (2023) https://doi.org/10.1140/epjc/s10052-023-11733-2

Report number: FERMILAB-PUB-22-488-AD-ESH-LBNF-ND-SCD, CERN-EP-DRAFT-MISC-2022-007

Journal ref: Eur. Phys. J. C 83, 618 (2023)

Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1204 additional authors not shown)

Abstract: Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det… ▽ More Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation. △ Less

Submitted 30 June, 2022; v1 submitted 31 March, 2022; originally announced March 2022.

Comments: 31 pages, 15 figures

Report number: FERMILAB-PUB-22-240-AD-ESH-LBNF-ND-SCD, CERN-EP-2022-077

Journal ref: Eur.Phys.J.C 82 (2022) 10, 903

Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1202 additional authors not shown)

Abstract: DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and… ▽ More DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties △ Less

Submitted 3 June, 2022; v1 submitted 30 March, 2022; originally announced March 2022.

Comments: 31 pages, 29 figures

Report number: CERN-EP-DRAFT-MISC-2022-003; FERMILAB-PUB-22-242-LBNF

Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. AlRashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1132 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t… ▽ More The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Report number: FERMILAB-PUB-21-391-ND

Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Ali-Mohammadzadeh, T. Alion, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti, M. P. Andrews , et al. (1158 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components. △ Less

Submitted 23 September, 2021; v1 submitted 4 August, 2021; originally announced August 2021.

Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report

Authors: A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, A. Aduszkiewicz, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, P. Amedo, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, N. Anfimov, A. Ankowski, M. Antonova, S. Antusch , et al. (1041 additional authors not shown)

Abstract: This report describes the conceptual design of the DUNE near detector This report describes the conceptual design of the DUNE near detector △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: 314 pages, 185 figures

Report number: FERMILAB-PUB-21-067-E-LBNF-PPD-SCD-T

Supernova Neutrino Burst Detection with the Deep Underground Neutrino Experiment

Authors: DUNE collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (949 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The gen… ▽ More The Deep Underground Neutrino Experiment (DUNE), a 40-kton underground liquid argon time projection chamber experiment, will be sensitive to the electron-neutrino flavor component of the burst of neutrinos expected from the next Galactic core-collapse supernova. Such an observation will bring unique insight into the astrophysics of core collapse as well as into the properties of neutrinos. The general capabilities of DUNE for neutrino detection in the relevant few- to few-tens-of-MeV neutrino energy range will be described. As an example, DUNE's ability to constrain the $ν_e$ spectral parameters of the neutrino burst will be considered. △ Less

Submitted 29 May, 2021; v1 submitted 15 August, 2020; originally announced August 2020.

Comments: 29 pages, 17 figures; paper based on DUNE Technical Design Report. arXiv admin note: substantial text overlap with arXiv:2002.03005

Report number: FERMILAB-PUB-20-380-LBNF

First results on ProtoDUNE-SP liquid argon time projection chamber performance from a beam test at the CERN Neutrino Platform

Authors: DUNE Collaboration, B. Abi, A. Abed Abud, R. Acciarri, M. A. Acero, G. Adamov, M. Adamowski, D. Adams, P. Adrien, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga , et al. (970 additional authors not shown)

Abstract: The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements… ▽ More The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber with an active volume of $7.2\times 6.0\times 6.9$ m$^3$. It is installed at the CERN Neutrino Platform in a specially-constructed beam that delivers charged pions, kaons, protons, muons and electrons with momenta in the range 0.3 GeV$/c$ to 7 GeV/$c$. Beam line instrumentation provides accurate momentum measurements and particle identification. The ProtoDUNE-SP detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment, and it incorporates full-size components as designed for that module. This paper describes the beam line, the time projection chamber, the photon detectors, the cosmic-ray tagger, the signal processing and particle reconstruction. It presents the first results on ProtoDUNE-SP's performance, including noise and gain measurements, $dE/dx$ calibration for muons, protons, pions and electrons, drift electron lifetime measurements, and photon detector noise, signal sensitivity and time resolution measurements. The measured values meet or exceed the specifications for the DUNE far detector, in several cases by large margins. ProtoDUNE-SP's successful operation starting in 2018 and its production of large samples of high-quality data demonstrate the effectiveness of the single-phase far detector design. △ Less

Submitted 3 June, 2021; v1 submitted 13 July, 2020; originally announced July 2020.

Comments: 93 pages, 70 figures

Report number: FERMILAB-PUB-20-059-AD-ESH-LBNF-ND-SCD, CERN-EP-2020-125

Journal ref: JINST 15 (2020) P12004

Neutrino interaction classification with a convolutional neural network in the DUNE far detector

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, M. Antonova, S. Antusch, A. Aranda-Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (951 additional authors not shown)

Abstract: The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electr… ▽ More The Deep Underground Neutrino Experiment is a next-generation neutrino oscillation experiment that aims to measure $CP$-violation in the neutrino sector as part of a wider physics program. A deep learning approach based on a convolutional neural network has been developed to provide highly efficient and pure selections of electron neutrino and muon neutrino charged-current interactions. The electron neutrino (antineutrino) selection efficiency peaks at 90% (94%) and exceeds 85% (90%) for reconstructed neutrino energies between 2-5 GeV. The muon neutrino (antineutrino) event selection is found to have a maximum efficiency of 96% (97%) and exceeds 90% (95%) efficiency for reconstructed neutrino energies above 2 GeV. When considering all electron neutrino and antineutrino interactions as signal, a selection purity of 90% is achieved. These event selections are critical to maximize the sensitivity of the experiment to $CP$-violating effects. △ Less

Submitted 10 November, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Comments: 39 pages, 11 figures

Journal ref: Phys. Rev. D 102, 092003 (2020)

Terahertz Nonlinear Index Extraction via Full-Phase Analysis

Authors: Kareem J. Garriga Francis, Mervin Lim Pac Chong, Yiwen E, X. -C. Zhang

Abstract: We experimentally show the spectrally averaged nonlinear refractive index and absorption coefficient for liquid water, water vapor, α-pinene, and Si using a full-phase analysis in the terahertz regime through a standard time-domain spectrometer. Our results confirm that the nonlinear index of refraction of the liquid samples in this regime exceeds the near-infrared optical nonlinear index by six o… ▽ More We experimentally show the spectrally averaged nonlinear refractive index and absorption coefficient for liquid water, water vapor, α-pinene, and Si using a full-phase analysis in the terahertz regime through a standard time-domain spectrometer. Our results confirm that the nonlinear index of refraction of the liquid samples in this regime exceeds the near-infrared optical nonlinear index by six orders of magnitude. In the case of liquid water and water vapor at atmospheric pressure, we find a nonlinear index of 7.8x10^-10 cm^2/W and 6x10^-11 cm^2/W respectively, which are both much larger than expected. △ Less

Submitted 11 June, 2020; originally announced June 2020.

Comments: 5 pages, 2 figures, 1 table

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume IV: Far Detector Single-phase Technology

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. Central to achieving DUNE's physics program is a far detector that combines the many tens-of-kiloton fiducial mass necessary for rare event searches with sub-centimeter spatial resolution in its ability to image those events, allowing identification of the physics signatures among the numerous backgrounds. In the single-phase liquid argon time-projection chamber (LArTPC) technology, ionization charges drift horizontally in the liquid argon under the influence of an electric field towards a vertical anode, where they are read out with fine granularity. A photon detection system supplements the TPC, directly enhancing physics capabilities for all three DUNE physics drivers and opening up prospects for further physics explorations. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume IV presents an overview of the basic operating principles of a single-phase LArTPC, followed by a description of the DUNE implementation. Each of the subsystems is described in detail, connecting the high-level design requirements and decisions to the overriding physics goals of DUNE. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 673 pages, 312 figures (corrected errors in author list)

Report number: FERMILAB-PUB-20-027-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume III: DUNE Far Detector Technical Coordination

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume III of this TDR describes how the activities required to design, construct, fabricate, install, and commission the DUNE far detector modules are organized and managed. This volume details the organizational structures that will carry out and/or oversee the planned far detector activities safely, successfully, on time, and on budget. It presents overviews of the facilities, supporting infrastructure, and detectors for context, and it outlines the project-related functions and methodologies used by the DUNE technical coordination organization, focusing on the areas of integration engineering, technical reviews, quality assurance and control, and safety oversight. Because of its more advanced stage of development, functional examples presented in this volume focus primarily on the single-phase (SP) detector module. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission, 209 pages, 55 figures (updated typos in Table A.5; corrected errors in author list)

Report number: FERMILAB-PUB-20-026-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume II: DUNE Physics

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-clas… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. DUNE is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. Volume II of this TDR, DUNE Physics, describes the array of identified scientific opportunities and key goals. Crucially, we also report our best current understanding of the capability of DUNE to realize these goals, along with the detailed arguments and investigations on which this understanding is based. This TDR volume documents the scientific basis underlying the conception and design of the LBNF/DUNE experimental configurations. As a result, the description of DUNE's experimental capabilities constitutes the bulk of the document. Key linkages between requirements for successful execution of the physics program and primary specifications of the experimental configurations are drawn and summarized. This document also serves a wider purpose as a statement on the scientific potential of DUNE as a central component within a global program of frontier theoretical and experimental particle physics research. Thus, the presentation also aims to serve as a resource for the particle physics community at large. △ Less

Submitted 25 March, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: 357 pages, 165 figures (updated typos in Table 6.1 and corrected errors in author list)

Report number: FERMILAB-PUB-20-025-ND

Deep Underground Neutrino Experiment (DUNE), Far Detector Technical Design Report, Volume I: Introduction to DUNE

Authors: B. Abi, R. Acciarri, Mario A. Acero, G. Adamov, D. Adams, M. Adinolfi, Z. Ahmad, J. Ahmed, T. Alion, S. Alonso Monsalve, C. Alt, J. Anderson, C. Andreopoulos, M. P. Andrews, F. Andrianala, S. Andringa, A. Ankowski, J. Anthony, M. Antonova, S. Antusch, A. Aranda Fernandez, A. Ariga, L. O. Arnold, M. A. Arroyave, J. Asaadi , et al. (941 additional authors not shown)

Abstract: The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Exper… ▽ More The preponderance of matter over antimatter in the early universe, the dynamics of the supernovae that produced the heavy elements necessary for life, and whether protons eventually decay -- these mysteries at the forefront of particle physics and astrophysics are key to understanding the early evolution of our universe, its current state, and its eventual fate. The Deep Underground Neutrino Experiment (DUNE) is an international world-class experiment dedicated to addressing these questions as it searches for leptonic charge-parity symmetry violation, stands ready to capture supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector technical design report (TDR) describes the DUNE physics program and the technical designs of the single- and dual-phase DUNE liquid argon TPC far detector modules. This TDR is intended to justify the technical choices for the far detector that flow down from the high-level physics goals through requirements at all levels of the Project. Volume I contains an executive summary that introduces the DUNE science program, the far detector and the strategy for its modular designs, and the organization and management of the Project. The remainder of Volume I provides more detail on the science program that drives the choice of detector technologies and on the technologies themselves. It also introduces the designs for the DUNE near detector and the DUNE computing model, for which DUNE is planning design reports. Volume II of this TDR describes DUNE's physics program in detail. Volume III describes the technical coordination required for the far detector design, construction, installation, and integration, and its organizational structure. Volume IV describes the single-phase far detector technology. A planned Volume V will describe the dual-phase technology. △ Less

Submitted 8 September, 2020; v1 submitted 7 February, 2020; originally announced February 2020.

Comments: Minor corrections made for JINST submission; 244 pages, 114 figures

Report number: FERMILAB-PUB-20-024-ND

Cryogenic SiPM arrays for the DUNE photon detection system

Authors: A. Falcone, A. Andreani, S. Bertolucci, C. Brizzolari, N. Buckanamd, M. Capasso, C. Cattadori, P. Carniti, M. Citterio, K. Francis, N. Gallice, A. Gola, C. Gotti, I. Lax, P. Litrico, A. Mazzi, M. Mellinato, A. Montanari, L. Patrizii, L. Pasqualini, G. Pessina, M. Pozzato, S. Riboldi, P. Sala, G. Sirri , et al. (7 additional authors not shown)

Abstract: In this paper we report on the characterization of SiPM tiles developed for the R & D on the DUNE Photon Detection System. The tiles were produced by Fondazione Bruno Kessler (FBK) employing NUV-HD-SF SiPMs. Special emphasis is given on cryo-reliability of the sensors, i.e. the stability of electric and mechanical properties after thermal cycles at room and 77K temperature. The characterization in… ▽ More In this paper we report on the characterization of SiPM tiles developed for the R & D on the DUNE Photon Detection System. The tiles were produced by Fondazione Bruno Kessler (FBK) employing NUV-HD-SF SiPMs. Special emphasis is given on cryo-reliability of the sensors, i.e. the stability of electric and mechanical properties after thermal cycles at room and 77K temperature. The characterization includes the determination of the I-V curve, a high sensitivity measurement of Dark Count Rate at different overvoltages, and correlated noise. The single p.e. sensitivity is measured as a function of the number of sensors connected to a single electronic channel, after amplification at 77K using a dedicated cold amplifier. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Comments: 17 pages, 10 figures, 4 table, submitted to NIM-A

Radiation Tests of Hamamatsu Multi-Pixel Photon Counters

Authors: G. Blazey, J. Colston, A. Dyshkant, K. Francis, J. Kalnins, S. A. Uzunyan, V. Zutshi, S. Hansen, P. Rubinov, E. C. Dukes, Y. Oksuzian, M. Pankuch

Abstract: Results of radiation tests of Hamamatsu 2.0 x 2.0~mm2 through-silicon-via (S13360-2050VE) multi-pixel photon counters, or MPPCs [1], are presented. Distinct sets of eight MPPCs were exposed to four different 1~MeV neutron equivalent doses of 200 MeV protons. Measurements of the breakdown voltage, gain and noise rates at different bias overvoltages, photoelectron thresholds, and LED illumination le… ▽ More Results of radiation tests of Hamamatsu 2.0 x 2.0~mm2 through-silicon-via (S13360-2050VE) multi-pixel photon counters, or MPPCs [1], are presented. Distinct sets of eight MPPCs were exposed to four different 1~MeV neutron equivalent doses of 200 MeV protons. Measurements of the breakdown voltage, gain and noise rates at different bias overvoltages, photoelectron thresholds, and LED illumination levels were taken before and after irradiation. No significant deterioration in performance was observed for breakdown voltage, gain, and response. Noise rates increased significantly with irradiation. These studies were undertaken in the context of MPPC requirements for the Cosmic Ray Veto detector of the Mu2e experiment at the Fermi National Accelerator Laboratory. △ Less

Submitted 17 June, 2019; originally announced June 2019.

Comments: Nucl. Inst. and Meth

Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype

Authors: CALICE Collaboration, G. Eigen, T. Price, N. K. Watson, A. Winter, Y. Do, A. Khan, D. Kim, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, K. Kawagoe, Y. Miura, R. Mori, I. Sekiya, T. Suehara, T. Yoshioka, J. Apostolakis, J. Giraud, D. Grondin, J. -Y. Hostachy, O. Bach, V. Bocharnikov, E. Brianne , et al. (81 additional authors not shown)

Abstract: A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorith… ▽ More A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated. △ Less

Submitted 18 September, 2019; v1 submitted 16 February, 2019; originally announced February 2019.

Comments: 21 pages, 21 figures

Report number: CALICE-PUB-2019-002

Journal ref: Nucl.Instrum.Meth. A937 (2019) 41-52

Analysis of Testbeam Data of the Highly Granular RPC-Steel CALICE Digital Hadron Calorimeter and Validation of Geant4 Monte Carlo Models

Authors: CALICE Collaboration, M. Chefdeville, J. Repond, J. Schlereth, J. R. Smith, D. Trojand, L. Xia, Q. Zhang, J. Apostolakis, C. Grefe, V. Ivantchenko, G. Folger, A. Ribon, V. Uzhinskiy, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, O. Bach, V. Bocharnikov, E. Brianne, K. Gadow, P. Göttlicher, O. Hartbrich, D. Heuchel , et al. (71 additional authors not shown)

Abstract: We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of… ▽ More We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of $1\,\times\,1\,$cm$^{2}$ and a longitudinal segmentation of 38 layers, the calorimeter counted 350,208 readout channels, each read out with single-bit resolution (digital readout). The data were recorded in the Fermilab test beam in 2010-11. The analysis includes measurements of the calorimeter response and the energy resolution to positrons and muons, as well as detailed studies of various shower shape quantities. The results are compared to simulations based on Geant4, which utilise different electromagnetic and hadronic physics lists. △ Less

Submitted 25 January, 2019; originally announced January 2019.

Report number: CALICE-PUB-2019-001

Hadronic Energy Resolution of a Combined High Granularity Scintillator Calorimeter System

Authors: CALICE Collaboration, J. Repond, L. Xia, J. Apostolakis, G. Folger, V. Ivantchenko, A. Ribon, V. Uzhinskiy, D. Boumediene, V. Francais, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, O. Bach, E. Brianne, A. Ebrahimi, K. Gadow, P. Gttlicher, O. Hartbrich F. Krivan, K. Krüger, J. Kvasnicka, S. Lu, C. Neubüser, A. Provenza , et al. (84 additional authors not shown)

Abstract: This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles.… ▽ More This paper presents results obtained with the combined CALICE Scintillator Electromagnetic Calorimeter, Analogue Hadronic Calorimeter and Tail Catcher & Muon Tracker, three high granularity scintillator-SiPM calorimeter prototypes. The response of the system to pions with momenta between 4 GeV/c and 32 GeV/c is analysed, including the energy response, resolution, and longitudinal shower profiles. The results of a software compensation technique based on weighting according to hit energy are compared to those of a standard linear energy reconstruction. The results are compared to predictions of the GEANT4 physics lists QGSP_BERT_HP and FTFP_BERT_HP. △ Less

Submitted 12 September, 2018; v1 submitted 11 September, 2018; originally announced September 2018.

Comments: 31 pages, 41 figures

The DUNE Far Detector Interim Design Report, Volume 3: Dual-Phase Module

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, M. Adamowski, C. Adams, D. Adams, P. Adamson, M. Adinolfi, Z. Ahmad, C. H. Albright, L. Aliaga Soplin, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, J. Anderson, K. Anderson, C. Andreopoulos, M. P. Andrews, R. A. Andrews, A. Ankowski, J. Anthony, M. Antonello, M. Antonova , et al. (1076 additional authors not shown)

Abstract: The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable… ▽ More The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 3 describes the dual-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: 280 pages, 109 figures. arXiv admin note: text overlap with arXiv:1807.10327

Report number: Fermilab-Design-2018-04

The DUNE Far Detector Interim Design Report Volume 1: Physics, Technology and Strategies

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, M. Adamowski, C. Adams, D. Adams, P. Adamson, M. Adinolfi, Z. Ahmad, C. H. Albright, L. Aliaga Soplin, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, J. Anderson, K. Anderson, C. Andreopoulos, M. P. Andrews, R. A. Andrews, A. Ankowski, J. Anthony, M. Antonello, M. Antonova , et al. (1076 additional authors not shown)

Abstract: The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable… ▽ More The DUNE IDR describes the proposed physics program and technical designs of the DUNE Far Detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 1 contains an executive summary that describes the general aims of this document. The remainder of this first volume provides a more detailed description of the DUNE physics program that drives the choice of detector technologies. It also includes concise outlines of two overarching systems that have not yet evolved to consortium structures: computing and calibration. Volumes 2 and 3 of this IDR describe, for the single-phase and dual-phase technologies, respectively, each detector module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: 83 pages, 11 figures

Report number: Fermilab-Design-2018-02

The DUNE Far Detector Interim Design Report, Volume 2: Single-Phase Module

Authors: DUNE Collaboration, B. Abi, R. Acciarri, M. A. Acero, M. Adamowski, C. Adams, D. Adams, P. Adamson, M. Adinolfi, Z. Ahmad, C. H. Albright, L. Aliaga Soplin, T. Alion, S. Alonso Monsalve, M. Alrashed, C. Alt, J. Anderson, K. Anderson, C. Andreopoulos, M. P. Andrews, R. A. Andrews, A. Ankowski, J. Anthony, M. Antonello, M. Antonova , et al. (1076 additional authors not shown)

Abstract: The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable… ▽ More The DUNE IDR describes the proposed physics program and technical designs of the DUNE far detector modules in preparation for the full TDR to be published in 2019. It is intended as an intermediate milestone on the path to a full TDR, justifying the technical choices that flow down from the high-level physics goals through requirements at all levels of the Project. These design choices will enable the DUNE experiment to make the ground-breaking discoveries that will help to answer fundamental physics questions. Volume 2 describes the single-phase module's subsystems, the technical coordination required for its design, construction, installation, and integration, and its organizational structure. △ Less

Submitted 26 July, 2018; originally announced July 2018.

Comments: 324 pages, 130 figures. arXiv admin note: text overlap with arXiv:1807.10340

Report number: Fermilab-Design-2018-03

Detection techniques and investigation of different neutrino experiments

Authors: Ankur Nath, Ng. K. Francis

Abstract: Neutrino physics is an experimentally driven field. So, we investigate the different detection techniques available in the literature and study the various neutrino oscillation experiments in a chronological manner. Our primary focus is on the construction and detection mechanisms of each experiment. Today, we know a lot about this mysterious ghostly particle by performing different experiments at… ▽ More Neutrino physics is an experimentally driven field. So, we investigate the different detection techniques available in the literature and study the various neutrino oscillation experiments in a chronological manner. Our primary focus is on the construction and detection mechanisms of each experiment. Today, we know a lot about this mysterious ghostly particle by performing different experiments at different times with different neutrino sources viz. solar, atmospheric, reactor, accelerators and high energy astrophysical; and they have contributed in the determination of neutrino parameters. Yet the problems are far from over. We need to determine more precise values of the already known parameters and unravel the completely unknown parameters. Some of the unknowns are absolute masses of neutrino, types of neutrino, mass hierarchy, octant degeneracy and existence of leptonic CP Phase(s). We analyse the neutrino experiments into the past, present and the future (or proposed). We include SNO, Kamiokande, K2K, MINOS, MINOS+, Chooz, NEMO and ICARUS in the past; while Borexino, Double Chooz, Super-K, T2K, IceCube, KamLAND, NO$ν$A, RENO and Daya Bay in the present; and SNO+, Hyper-K, JUNO, RENO-50, INO, DUNE, SuperNEMO, KM3NeT, P2O, LBNO and PINGU in the proposed experiments. We also discuss the necessities of upgrading the present ones to those of the proposed ones thereby summarizing the potentials of the future experiments. We conclude this paper with the current status of the neutrinos. △ Less

Submitted 9 August, 2018; v1 submitted 23 April, 2018; originally announced April 2018.

Comments: 17 Figures, 4 Tables

Photoelectron Yields of Scintillation Counters with Embedded Wavelength-Shifting Fibers Read Out With Silicon Photomultipliers

Authors: Akram Artikov, Vladimir Baranov, Gerald C. Blazey, Ningshun Chen, Davit Chokheli, Yuri Davydov, E. Craig Dukes, Alexsander Dychkant, Ralf Ehrlich, Kurt Francis, M. J. Frank, Vladimir Glagolev, Craig Group, Sten Hansen, Stephen Magill, Yuri Oksuzian, Anna Pla-Dalmau, Paul Rubinov, Aleksandr Simonenko, Enhao Song, Steven Stetzler, Yongyi Wu, Sergey Uzunyan, Vishnu Zutshi

Abstract: Photoelectron yields of extruded scintillation counters with titanium dioxide coating and embedded wavelength shifting fibers read out by silicon photomultipliers have been measured at the Fermilab Test Beam Facility using 120\,GeV protons. The yields were measured as a function of transverse, longitudinal, and angular positions for a variety of scintillator compositions and reflective coating mix… ▽ More Photoelectron yields of extruded scintillation counters with titanium dioxide coating and embedded wavelength shifting fibers read out by silicon photomultipliers have been measured at the Fermilab Test Beam Facility using 120\,GeV protons. The yields were measured as a function of transverse, longitudinal, and angular positions for a variety of scintillator compositions and reflective coating mixtures, fiber diameters, and photosensor sizes. Timing performance was also studied. These studies were carried out by the Cosmic Ray Veto Group of the Mu2e collaboration as part of their R\&D program. △ Less

Submitted 5 February, 2018; v1 submitted 19 September, 2017; originally announced September 2017.

Comments: To be published in NIM

Report number: FERMILAB-PUB-17-386-PPD

Journal ref: Nucl.Instrum.Meth. A 890 (2018) 84-95

Construction and Response of a Highly Granular Scintillator-based Electromagnetic Calorimeter

Authors: CALICE collaboration, J. Repond, L. Xia, G. Eigen, T. Price, N. K. Watson, A. Winter, M. A. Thomson, G. C. Blazey, A. Dyshkant, K. Francis, V. Zutshi, K. Gadow, P. Göttlicher, O. Hartbrich, F. Krivan, K. Krüger, S. Lu, B. Lutz, M. Reinecke, F. Sefkow, Y. Sudo, H. L. Tran, A. Kaplan, H. -Ch. Schultz-Coulon , et al. (57 additional authors not shown)

Abstract: A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future lepton collider experiments. A prototype of 21.5 $X_0$ depth and $180 \times 180 $mm$^2$ transverse dimensions was constructed, consisting of 2160 individually read out $10 \times 45 \times 3$ mm$^3$ scintillator strips. This prototype was tested using electrons of 2--32 GeV at the Fermilab… ▽ More A highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future lepton collider experiments. A prototype of 21.5 $X_0$ depth and $180 \times 180 $mm$^2$ transverse dimensions was constructed, consisting of 2160 individually read out $10 \times 45 \times 3$ mm$^3$ scintillator strips. This prototype was tested using electrons of 2--32 GeV at the Fermilab Test Beam Facility in 2009. Deviations from linear energy response were less than 1.1\%, and the intrinsic energy resolution was determined to be $(12.5 \pm 0.1 (\mathrm{stat.}) \pm0.4 (\mathrm{syst.}))\%/\sqrt{E[\mathrm{GeV}]}\oplus (1.2 \pm 0.1(\mathrm{stat.})^{+0.6}_{-0.7}(\mathrm{syst.}))\%$, where the uncertainties correspond to statistical and systematic sources, respectively. △ Less

Submitted 28 February, 2018; v1 submitted 22 July, 2017; originally announced July 2017.

Comments: This article is published in Nuclear Inst. and Methods in Physics Research, A 887 (2018) 150-168

Journal ref: Nuclear Inst. and Methods in Physics Research, A 887 (2018) 150-168

Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics

Authors: C. Adams, A. Bambaugh, B. Bilki, J. Butler, F. Corriveau, T. Cundiff, G. Drake, K. Francis, V. Guarino, B. Haberichter, E. Hazen, J. Hoff, S. Holm, A. Kreps, P. DeLurgio, L. Dal Monte, N. Mucia, E. Norbeck, D. Northacker, Y. Onel, B. Pollack, J. Repond, J. Schlereth, J. R. Smith, D. Trojand , et al. (8 additional authors not shown)

Abstract: A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord… ▽ More A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of the electronic readout system of this prototype calorimeter. The system is based on the DCAL front-end chip and a VME-based back-end. △ Less

Submitted 4 March, 2016; originally announced March 2016.

Design, Construction and Commissioning of the Digital Hadron Calorimeter - DHCAL

Authors: C. Adams, A. Bambaugh, B. Bilki, J. Butler, F. Corriveau, T. Cundiff, G. Drake, K. Francis, B. Furst, V. Guarino, B. Haberichter, E. Hazen, J. Hoff, S. Holm, A. Kreps, P. DeLurgio, Z. Matijas, L. Dal Monte, N. Mucia, E. Norbeck, D. Northacker, Y. Onel, B. Pollack, J. Repond, J. Schlereth , et al. (11 additional authors not shown)

Abstract: A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord… ▽ More A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of this prototype calorimeter. △ Less

Submitted 4 March, 2016; originally announced March 2016.

DHCAL with Minimal Absorber: Measurements with Positrons

Authors: The CALICE Collaboration, B. Freund, C. Neubüser, J. Repond, J. Schlereth, L. Xia, A. Dotti, C. Grefe, V. Ivantchenko, J. Berenguer Antequera, E. Calvo Alamillo, M. -C. Fouz, J. Marin, J. Puerta-Pelayo, A. Verdugo, E. Brianne, A. Ebrahimi, K. Gadow, P. Göttlicher, C. Günter, O. Hartbrich, B. Hermberg, A. Irles, F. Krivan, K. Krüger , et al. (78 additional authors not shown)

Abstract: In special tests, the active layers of the CALICE Digital Hadron Calorimeter prototype, the DHCAL, were exposed to low energy particle beams, without being interleaved by absorber plates. The thickness of each layer corresponded approximately to 0.29 radiation lengths or 0.034 nuclear interaction lengths, defined mostly by the copper and steel skins of the detector cassettes. This paper reports on… ▽ More In special tests, the active layers of the CALICE Digital Hadron Calorimeter prototype, the DHCAL, were exposed to low energy particle beams, without being interleaved by absorber plates. The thickness of each layer corresponded approximately to 0.29 radiation lengths or 0.034 nuclear interaction lengths, defined mostly by the copper and steel skins of the detector cassettes. This paper reports on measurements performed with this device in the Fermilab test beam with positrons in the energy range of 1 to 10 GeV. The measurements are compared to simulations based on GEANT4 and a standalone program to emulate the detailed response of the active elements. △ Less

Submitted 4 March, 2016; originally announced March 2016.

Calibration and GEANT4 Simulations of the Phase II Proton Compute Tomography (pCT) Range Stack Detector

Authors: S. A. Uzunyan, G. Blazey, S. Boi, G. Coutrakon, A. Dyshkant, K. Francis, D. Hedin, E. Johnson, J. Kalnins, V. Zutshi, R. Ford, J. E. Rauch, P. Rubinov, G. Sellberg, P. Wilson, M. Naimuddin

Abstract: Northern Illinois University in collaboration with Fermi National Accelerator Laboratory (FNAL) and Delhi University has been designing and building a proton CT scanner for applications in proton treatment planning. The Phase II proton CT scanner consists of eight planes of tracking detectors with two X and two Y coordinate measurements both before and after the patient. In addition, a range stack… ▽ More Northern Illinois University in collaboration with Fermi National Accelerator Laboratory (FNAL) and Delhi University has been designing and building a proton CT scanner for applications in proton treatment planning. The Phase II proton CT scanner consists of eight planes of tracking detectors with two X and two Y coordinate measurements both before and after the patient. In addition, a range stack detector consisting of a stack of thin scintillator tiles, arranged in twelve eight-tile frames, is used to determine the water equivalent path length (WEPL) of each track through the patient. The X-Y coordinates and WEPL are required input for image reconstruction software to find the relative (proton) stop** powers (RSP) value of each voxel in the patient and generate a corresponding 3D image. In this Note we describe tests conducted in 2015 at the proton beam at the Central DuPage Hospital in Warrenville, IL, focusing on the range stack calibration procedure and comparisons with the GEANT~4 range stack simulation. △ Less

Submitted 4 January, 2016; v1 submitted 3 January, 2016; originally announced January 2016.

Report number: FERMILAB-TM-2617-AD-CD-E

Performance of Scintillator Counters with Silicon Photomultiplier Readout

Authors: Mu2e Collaboration Cosmic Ray Veto Group, A. Artikov, V. Baranov, D. Chokheli, Yu. I. Davydov, E. C. Dukes, R. Ehrlich, K. Francis, M. J. Frank, V. Glagolev, R. C. Group, S. Hansen, A. Hocker, Y. Oksuzian, P. Rubinov, E. Song, S. Uzunyan, Y. Wu

Abstract: The performance of scintillator counters with embedded wavelength-shifting fibers has been measured in the Fermilab Meson Test Beam Facility using 120 GeV protons. The counters were extruded with a titanium dioxide surface coating and two channels for fibers at the Fermilab NICADD facility. Each fiber end is read out by a 2*2 mm^2 silicon photomultiplier. The signals were amplified and digitized b… ▽ More The performance of scintillator counters with embedded wavelength-shifting fibers has been measured in the Fermilab Meson Test Beam Facility using 120 GeV protons. The counters were extruded with a titanium dioxide surface coating and two channels for fibers at the Fermilab NICADD facility. Each fiber end is read out by a 2*2 mm^2 silicon photomultiplier. The signals were amplified and digitized by a custom-made front-end electronics board. Combinations of 5*2 cm^2 and 6*2 cm^2 extrusion profiles with 1.4 and 1.8 mm diameter fibers were tested. The design is intended for the cosmic-ray veto detector for the Mu2e experiment at Fermilab. The light yield as a function of the transverse and longitudinal position of the beam will be given. △ Less

Submitted 1 November, 2015; originally announced November 2015.

Comments: Presentation at the DPF 2015 Meeting of the American Physical Society Division of Particles and Fields, Ann Arbor, Michigan, August 4-8, 2015

Shower development of particles with momenta from 15 GeV to 150 GeV in the CALICE scintillator-tungsten hadronic calorimeter

Authors: The CALICE collaboration, M. Chefdeville, Y. Karyotakis, J. Repond, J. Schlereth, L. Xia, G. Eigen, J. S. Marshall, M. A. Thomson, D. R. Ward, N. Alipour Tehrani, J. Apostolakis, D. Dannheim, K. Elsener, G. Folger, C. Grefe, V. Ivantchenko, M. Killenberg, W. Klempt, E. van der Kraaij, L. Linssen, A. -I. Lucaci-Timoce, A. Münnich, S. Poss, A. Ribon , et al. (158 additional authors not shown)

Abstract: We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolutio… ▽ More We present a study of showers initiated by electrons, pions, kaons, and protons with momenta from 15 GeV to 150 GeV in the highly granular CALICE scintillator-tungsten analogue hadronic calorimeter. The data were recorded at the CERN Super Proton Synchrotron in 2011. The analysis includes measurements of the calorimeter response to each particle type as well as measurements of the energy resolution and studies of the longitudinal and radial shower development for selected particles. The results are compared to Geant4 simulations (version 9.6.p02). In the study of the energy resolution we include previously published data with beam momenta from 1 GeV to 10 GeV recorded at the CERN Proton Synchrotron in 2010. △ Less

Submitted 11 December, 2015; v1 submitted 2 September, 2015; originally announced September 2015.

Comments: 35 pages, 21 figures, 8 tables

Journal ref: 2015 JINST 10 P12006

Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter

Authors: The CALICE Collaboration, B. Bilki, J. Repond, L. Xia, G. Eigen, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki, S. Chang, A. Khan, D. H. Kim, D. J. Kong, Y. D. Oh, G. C. Blazey, A. Dyshkant, K. Francis, J. G. R. Lima, R. Salcido, V. Zutshi, F. Salvatore, K. Kawagoe, Y. Miyazaki, Y. Sudo , et al. (147 additional authors not shown)

Abstract: Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simul… ▽ More Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared. △ Less

Submitted 15 March, 2015; v1 submitted 8 December, 2014; originally announced December 2014.

Comments: 26 pages, 16 figures, JINST style, changes in the author list, typos corrected, new section added, figures regrouped. Accepted for publication in JINST

Testing Hadronic Interaction Models using a Highly Granular Silicon-Tungsten Calorimeter

Authors: The CALICE Collaboration, B. Bilki, J. Repond, J. Schlereth, L. Xia, Z. Deng, Y. Li, Y. Wang, Q. Yue, Z. Yang, G. Eigen, Y. Mikami, T. Price, N. K. Watson, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki, C. Cârloganu, S. Chang, A. Khan, D. H. Kim, D. J. Kong, Y. D. Oh , et al. (127 additional authors not shown)

Abstract: A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable ove… ▽ More A detailed study of hadronic interactions is presented using data recorded with the highly granular CALICE silicon-tungsten electromagnetic calorimeter. Approximately 350,000 selected negatively charged pion events at energies between 2 and 10 GeV have been studied. The predictions of several physics models available within the Geant4 simulation tool kit are compared to this data. A reasonable overall description of the data is observed; the Monte Carlo predictions are within 20% of the data, and for many observables much closer. The largest quantitative discrepancies are found in the longitudinal and transverse distributions of reconstructed energy. △ Less

Submitted 8 May, 2015; v1 submitted 26 November, 2014; originally announced November 2014.

Comments: 28 pages, 24 figures, accepted for publication in NIM A

Journal ref: Nucl. Instrum. Meth. A 794: 240-254, 2015

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter

Authors: CALICE Collaboration, K. Francis, J. Repond, J. Schlereth, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, G. Eigen, Y. Mikami, N. K. Watson, M. A. Thomson, D. R. Ward, D. Benchekroun, A. Hoummada, Y. Khoulaki, J. Apostolakis, A. Dotti, G. Folger, V. Ivantchenko, A. Ribon , et al. (169 additional authors not shown)

Abstract: A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measur… ▽ More A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques. △ Less

Submitted 11 June, 2014; v1 submitted 15 November, 2013; originally announced November 2013.

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2014), pp. 278-289

Physics at the CLIC e+e- Linear Collider -- Input to the Snowmass process 2013

Authors: Halina Abramowicz, Angel Abusleme, Konstatin Afanaciev, Gideon Alexander, Niloufar Alipour Tehrani, Oscar Alonso, Kristoffer K. Andersen, Samir Arfaoui, Csaba Balazs, Tim Barklow, Marco Battaglia, Mathieu Benoit, Burak Bilki, Jean-Jacques Blaising, Mark Boland, Marça Boronat, Ivanka Božović Jelisavčić, Philip Burrows, Maximilien Chefdeville, Roberto Contino, Dominik Dannheim, Marcel Demarteau, Marco Aurelio Diaz Gutierrez, Angel Diéguez, Jorge Duarte Campderros , et al. (98 additional authors not shown)

Abstract: This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accomp… ▽ More This paper summarizes the physics potential of the CLIC high-energy e+e- linear collider. It provides input to the Snowmass 2013 process for the energy-frontier working groups on The Higgs Boson (HE1), Precision Study of Electroweak Interactions (HE2), Fully Understanding the Top Quark (HE3), as well as The Path Beyond the Standard Model -- New Particles, Forces, and Dimensions (HE4). It is accompanied by a paper describing the CLIC accelerator study, submitted to the Frontier Capabilities group of the Snowmass process. △ Less

Submitted 30 September, 2013; v1 submitted 19 July, 2013; originally announced July 2013.

Comments: Updated the author list, updated Higgs results and small changes in the text of the Higgs section, updated results on composite Higgs bosons, added and updated references. Final submission for the Snowmass proceedings

Validation of GEANT4 Monte Carlo Models with a Highly Granular Scintillator-Steel Hadron Calorimeter

Authors: C. Adloff, J. Blaha, J. -J. Blaising, C. Drancourt, A. Espargilière, R. Gaglione, N. Geffroy, Y. Karyotakis, J. Prast, G. Vouters, K. Francis, J. Repond, J. Schlereth, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, T. Buanes, G. Eigen, Y. Mikami, N. K. Watson , et al. (148 additional authors not shown)

Abstract: Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are… ▽ More Calorimeters with a high granularity are a fundamental requirement of the Particle Flow paradigm. This paper focuses on the prototype of a hadron calorimeter with analog readout, consisting of thirty-eight scintillator layers alternating with steel absorber planes. The scintillator plates are finely segmented into tiles individually read out via Silicon Photomultipliers. The presented results are based on data collected with pion beams in the energy range from 8GeV to 100GeV. The fine segmentation of the sensitive layers and the high sampling frequency allow for an excellent reconstruction of the spatial development of hadronic showers. A comparison between data and Monte Carlo simulations is presented, concerning both the longitudinal and lateral development of hadronic showers and the global response of the calorimeter. The performance of several GEANT4 physics lists with respect to these observables is evaluated. △ Less

Submitted 15 June, 2014; v1 submitted 13 June, 2013; originally announced June 2013.

Journal ref: JINST 8 P07005 2013

Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter

Authors: CALICE Collaboration, C. Adloff, J. -J. Blaising, M. Chefdeville, C. Drancourt, R. Gaglione, N. Geffroy, Y. Karyotakis, I. Koletsou, J. Prast, G. Vouters, K. Francis, J. Repond, J. Schlereth, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, G. Eigen, Y. Mikami, N. K. Watson , et al. (184 additional authors not shown)

Abstract: We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angul… ▽ More We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angular distribution of identified track segments are compared to GEANT4 simulations with several different shower models. Track segments also provide the possibility for in-situ calibration of highly granular calorimeters. △ Less

Submitted 29 July, 2013; v1 submitted 30 May, 2013; originally announced May 2013.

Comments: 27 pages, 17 figures, accepted for publication in JINST

Report number: MPP-2013-143

Studies on fast triggering and high precision tracking with Resistive Plate Chambers

Authors: G. Aielli, B. Bilki, R. Ball, J. W. Chapman, R. Cardarelli, T. Dai, E. Diehl, J. Dubbert, C. Ferretti, H. Feng, K. Francis, L. Guan, L. Han, S. Hou, D. Levin, B. Li, L. Liu, L. Paolozzi, J. Repond, J. Roloff, R. Santonico, H. Y. Song, X. L. Wang, Y. Wu, L. Xia , et al. (5 additional authors not shown)

Abstract: We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering… ▽ More We report on studies of fast triggering and high-precision tracking using Resistive Plate Chambers (RPCs). Two beam tests were carried out with the 180 GeV muon beam at CERN using RPCs with gas gaps of 1.00 or 1.15 mm and equipped with readout strips with 1.27 mm pitch. This is the first beam test of RPCs with fine-pitch readout strips that explores simultaneously precision tracking and triggering capabilities. RPC signals were acquired with precision timing and charge integrating readout electronics at both ends of the strips. The time resolution was measured to be better than 600 ps and the average spatial resolution was found to be 220 um using charge information and 287 um using timing information. The dual-ended readout allows the determination of the average and the difference of the signal arrival times. The average time was found to be independent of the incident particle position along the strip and is useful for triggering purposes. The time difference yielded a determination of the hit position with a precision of 7.5 mm along the strip. These results demonstrate the feasibility using RPCs for fast and high-resolution triggering and tracking. △ Less

Submitted 24 October, 2012; originally announced October 2012.

Comments: 7 pages, 11 figures, submitted to Nucl. Instru. Meth

Hadronic energy resolution of a highly granular scintillator-steel hadron calorimeter using software compensation techniques

Authors: CALICE Collaboration, C. Adloff, J. Blaha, J. -J. Blaising, C. Drancourt, A. Espargilière, R. Gaglione, N. Geffroy, Y. Karyotakis, J. Prast, G. Vouters, K. Francis, J. Repond, J. Smith, L. Xia, E. Baldolemar, J. Li, S. T. Park, M. Sosebee, A. P. White, J. Yu, T. Buanes, G. Eigen, Y. Mikami, N. K. Watson , et al. (142 additional authors not shown)

Abstract: The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS. The energy resolution for single hadrons is determined to be approximately 58%/sqrt(E/GeV}. This resolution is improved to approximately 45%/sqrt(E/GeV) with software compensation techniques. These techniques take advan… ▽ More The energy resolution of a highly granular 1 m3 analogue scintillator-steel hadronic calorimeter is studied using charged pions with energies from 10 GeV to 80 GeV at the CERN SPS. The energy resolution for single hadrons is determined to be approximately 58%/sqrt(E/GeV}. This resolution is improved to approximately 45%/sqrt(E/GeV) with software compensation techniques. These techniques take advantage of the event-by-event information about the substructure of hadronic showers which is provided by the imaging capabilities of the calorimeter. The energy reconstruction is improved either with corrections based on the local energy density or by applying a single correction factor to the event energy sum derived from a global measure of the shower energy density. The application of the compensation algorithms to Geant4 simulations yield resolution improvements comparable to those observed for real data. △ Less

Submitted 27 September, 2012; v1 submitted 17 July, 2012; originally announced July 2012.

Comments: 26 pages, 14 figures

Report number: MPP-2012-116

Journal ref: JINST 7 P09017 (2012)

Construction of the Digital Hadron Calorimeter

Authors: Kurt Francis

Abstract: Particle Flow Algorithms (PFAs) have been proposed as a method of improving the jet energy resolution of future colliding beam detectors. PFAs require calorimeters with high granularity to enable three-dimensional imaging of events. The Calorimeter for the Linear Collider Collaboration (CALICE) is develo** and testing prototypes of such highly segmented calorimeters. In this context, a large pro… ▽ More Particle Flow Algorithms (PFAs) have been proposed as a method of improving the jet energy resolution of future colliding beam detectors. PFAs require calorimeters with high granularity to enable three-dimensional imaging of events. The Calorimeter for the Linear Collider Collaboration (CALICE) is develo** and testing prototypes of such highly segmented calorimeters. In this context, a large prototype of a Digital Hadron Calorimeter (DHCAL) was developed and constructed by a group led by Argonne National Laboratory. The DHCAL consists of 52 layers, instrumented with Resistive Plate Chambers (RPCs) and interleaved with steel absorber plates. The RPCs are read out by 1 x 1 cm2 pads with a 1-bit resolution (digital readout). The DHCAL prototype has approximately 480,000 readout channels. This talk reports on the design, construction and commissioning of the DHCAL. The DHCAL was installed at the Fermilab Test Beam Facility in fall 2010 and data was collected through the summer 2011. △ Less

Submitted 27 February, 2012; originally announced February 2012.