-
Statistical analysis of event classification in experimental data
Authors:
Rudolf Frühwirth,
Winfried Mitaroff
Abstract:
The paper addresses general aspects of experimental data analysis, dealing with the separation of ``signal vs. background''. It consists of two parts.
Part I is a tutorial on statistical event classification, Bayesian inference, and test optimization. Aspects of the base data sample if being created by Poisson processes are discussed, and a method for estimating the unknown numbers of signal and…
▽ More
The paper addresses general aspects of experimental data analysis, dealing with the separation of ``signal vs. background''. It consists of two parts.
Part I is a tutorial on statistical event classification, Bayesian inference, and test optimization. Aspects of the base data sample if being created by Poisson processes are discussed, and a method for estimating the unknown numbers of signal and background events is presented. Data quality of the selected events sample is assessed by the expected purity and background contamination.
Part II contains a rigorous statistical analysis of the methods discussed in Part I. Both Bayesian and frequentist estimators of the unknown signal/background content are investigated. The estimates and their stochastic uncertainties are calculated for various conjugate priors in the Bayesian case, and for three choices of the virtual parent population in the frequentist case.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Track Finding at Belle II
Authors:
Valerio Bertacchi,
Tadeas Bilka,
Nils Braun,
Giulia Casarosa,
Luigi Corona,
Sam Cunliffe,
Filippo Dattola,
Gaetano De Marino,
Michael De Nuccio,
Giacomo De Pietro,
Thanh Van Dong,
Giulio Dujany,
Patrick Ecker,
Michael Eliachevitch,
Tristan Fillinger,
Oliver Frost,
Rudolf Fruehwirth,
Uwe Gebauer,
Alexander Glazov,
Nicolas Gosling,
Aiqiang Guo,
Thomas Hauth,
Martin Heck,
Mateusz Kaleta,
Jakub Kandra
, et al. (33 additional authors not shown)
Abstract:
This paper describes the track-finding algorithm that is used for event reconstruction in the Belle II experiment operating at the SuperKEKB B-factory in Tsukuba, Japan. The algorithm is designed to balance the requirements of a high efficiency to find charged particles with a good track parameter resolution, a low rate of spurious tracks, and a reasonable demand on CPU resources. The software is…
▽ More
This paper describes the track-finding algorithm that is used for event reconstruction in the Belle II experiment operating at the SuperKEKB B-factory in Tsukuba, Japan. The algorithm is designed to balance the requirements of a high efficiency to find charged particles with a good track parameter resolution, a low rate of spurious tracks, and a reasonable demand on CPU resources. The software is implemented in a flexible, modular manner and employs a diverse selection of global and local track-finding algorithms to achieve an optimal performance.
△ Less
Submitted 26 November, 2021; v1 submitted 27 March, 2020;
originally announced March 2020.
-
Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
A neural network z-vertex trigger for Belle II
Authors:
Sara Neuhaus,
Sebastian Skambraks,
Fernando Abudinén,
Yang Chen,
Michael Feindt,
Rudolf Frühwirth,
Martin Heck,
Christian Kiesling,
Alois Knoll,
Stephan Paul,
Jochen Schieck
Abstract:
We present the concept of a track trigger for the Belle II experiment, based on a neural network approach, that is able to reconstruct the z (longitudinal) position of the event vertex within the latency of the first level trigger. The trigger will thus be able to suppress a large fraction of the dominating background from events outside of the interaction region. The trigger uses the drift time i…
▽ More
We present the concept of a track trigger for the Belle II experiment, based on a neural network approach, that is able to reconstruct the z (longitudinal) position of the event vertex within the latency of the first level trigger. The trigger will thus be able to suppress a large fraction of the dominating background from events outside of the interaction region. The trigger uses the drift time information of the hits from the Central Drift Chamber (CDC) of Belle II within narrow cones in polar and azimuthal angle as well as in transverse momentum (sectors), and estimates the z-vertex without explicit track reconstruction. The preprocessing for the track trigger is based on the track information provided by the standard CDC trigger. It takes input from the 2D ($r - \varphi$) track finder, adds information from the stereo wires of the CDC, and finds the appropriate sectors in the CDC for each track in a given event. Within each sector, the z-vertex of the associated track is estimated by a specialized neural network, with a continuous output corresponding to the scaled z-vertex. The input values for the neural network are calculated from the wire hits of the CDC.
△ Less
Submitted 11 February, 2015; v1 submitted 6 October, 2014;
originally announced October 2014.
-
Demonstrator of the Belle II Online Tracking and Pixel Data Reduction on the High Level Trigger System
Authors:
T. Bilka,
G. Casarosa,
R. Frühwirth,
C. Kleinwort,
P. Kodys,
P. Kvasnicka,
J. Lettenbichler,
E. Paoloni,
J. Rauch,
T. Schlüter,
S. Yashchenko
Abstract:
The future Belle II experiment will employ a computer-farm based data reduction system for the readout of its innermost detector, a DEPFET-technology based silicon detector with pixel readout. A large fraction of the background hits can be rejected by defining a set of Regions Of Interest (ROI) on the pixel detector sensors and then recording just the data from the pixels inside the ROI. The ROIs…
▽ More
The future Belle II experiment will employ a computer-farm based data reduction system for the readout of its innermost detector, a DEPFET-technology based silicon detector with pixel readout. A large fraction of the background hits can be rejected by defining a set of Regions Of Interest (ROI) on the pixel detector sensors and then recording just the data from the pixels inside the ROI. The ROIs are defined on an event by event basis by extrapolating back onto the PXD the charged tracks detected in the outer trackers (a 4 layer double-sided silicon strip detector surrounded by a wire chamber). The tracks are reconstructed in real time on the High Level Trigger (HLT). The pixel detector is then read out based on the ROI information. A demonstrator of this architecture was under beam test earlier this year in DESY (Hamburg, Germany). The demonstrator was operated in an electron beam whose momentum was in the 2-6 GeV/c range with a typical trigger rate of a few kHz in a magnetic field of strength up to 1 T. The demonstrator consists of one pixel sensor and 4 silicon strip sensors arranged in a 5 layers configuration mimicking the Belle II vertex detector. The detector readout was a scaled down version of the full Belle II DAQ + HLT chain. The demonstrator was used to detect the particles, reconstruct in real time the trajectories, identify the ROIs on the PXD plane and record the PXD data within. We describe the requirements and the architecture of the final system together with the results obtained with the demonstrator.
△ Less
Submitted 2 April, 2015; v1 submitted 19 June, 2014;
originally announced June 2014.
-
A z-Vertex Trigger for Belle II
Authors:
Sebastian Skambraks,
Fernando Abudinen,
Yang Chen,
Michael Feindt,
Rudolf Frühwirth,
Martin Heck,
Christian Kiesling,
Alois Knoll,
Sara Neuhaus,
Stephan Paul,
Jochen Schieck
Abstract:
The Belle II experiment will go into operation at the upgraded SuperKEKB collider in 2016. SuperKEKB is designed to deliver an instantaneous luminosity $\mathcal{L}=8\times10^{35}\,\mathrm{cm}^{-2}\,\mathrm{s}^{-1}$. The experiment will therefore have to cope with a much larger machine background than its predecessor Belle, in particular from events outside of the interaction region. We present th…
▽ More
The Belle II experiment will go into operation at the upgraded SuperKEKB collider in 2016. SuperKEKB is designed to deliver an instantaneous luminosity $\mathcal{L}=8\times10^{35}\,\mathrm{cm}^{-2}\,\mathrm{s}^{-1}$. The experiment will therefore have to cope with a much larger machine background than its predecessor Belle, in particular from events outside of the interaction region. We present the concept of a track trigger, based on a neural network approach, that is able to suppress a large fraction of this background by reconstructing the $z$ (longitudinal) position of the event vertex within the latency of the first level trigger. The trigger uses the hit information from the Central Drift Chamber (CDC) of Belle II within narrow cones in polar and azimuthal angle as well as in transverse momentum ("sectors"), and estimates the $z$-vertex without explicit track reconstruction. The preprocessing for the track trigger is based on the track information provided by the standard CDC trigger. It takes input from the 2D track finder, adds information from the stereo wires of the CDC, and finds the appropriate sectors in the CDC for each track. Within the sector, the $z$-vertex is estimated by a specialized neural network, with the drift times from the CDC as input and a continuous output corresponding to the scaled $z$-vertex. The neural algorithm will be implemented in programmable hardware. To this end a Virtex 7 FPGA board will be used, which provides at present the most promising solution for a fully parallelized implementation of neural networks or alternative multivariate methods. A high speed interface for external memory will be integrated into the platform, to be able to store the $\mathcal{O}(10^9)$ parameters required. The contribution presents the results of our feasibility studies and discusses the details of the envisaged hardware solution.
△ Less
Submitted 3 July, 2015; v1 submitted 12 June, 2014;
originally announced June 2014.
-
Forward Tracking in the ILD Detector
Authors:
Robin Glattauer,
Rudolf Frühwirth,
Jakob Lettenbichler,
Winfried Mitaroff
Abstract:
The reconstruction software for ILD is currently subject to a major revision, aiming at improving its accuracy, speed, efficiency and maintainability in time for the upcoming DBD Report. This requires replacing old code by novel methods for track search and fit, together with modern standards for interfaces and tools. Track reconstruction in the "forward region", defined by the silicon Forward Tra…
▽ More
The reconstruction software for ILD is currently subject to a major revision, aiming at improving its accuracy, speed, efficiency and maintainability in time for the upcoming DBD Report. This requires replacing old code by novel methods for track search and fit, together with modern standards for interfaces and tools. Track reconstruction in the "forward region", defined by the silicon Forward Tracking Detector (FTD), relies heavily on a powerful stand-alone track search. The new software makes use of a Cellular Automaton, a Kalman filter, and a Hopfield Neural Network. We give an overview of the project, its methods and merits.
△ Less
Submitted 13 February, 2012;
originally announced February 2012.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
LiC Detector Toy - Tracking detector optimization with fast simulation and its application to the ILD design
Authors:
Manfred Valentan,
Meinhard Regler,
Winfried Mitaroff,
Rudolf Fruhwirth
Abstract:
The "LiC Detector Toy" is a fast single-track simulation and reconstruction tool, aiming at the optimization of tracking detector design, i.e. geometric layout and material budgets. Its implementation is based on the MATLAB system. Improvements over the last year include correct handling of complex forward regions (arbitrary mixture of cylindrical and plane surfaces), enhanced detector descripti…
▽ More
The "LiC Detector Toy" is a fast single-track simulation and reconstruction tool, aiming at the optimization of tracking detector design, i.e. geometric layout and material budgets. Its implementation is based on the MATLAB system. Improvements over the last year include correct handling of complex forward regions (arbitrary mixture of cylindrical and plane surfaces), enhanced detector description, flexible data presentation of results (e.g. fitted track resolutions and impact parameters), and support by an integrated GUI. In addition a non-GUI version running under open-source OCTAVE has been implemented. The tool has recently been used for fixing the "reference design" layout of the silicon tracker (SIT, SET and FTD) of the ILD detector concept.
△ Less
Submitted 27 January, 2009;
originally announced January 2009.
-
Reconstruction of electrons with the Gaussian-sum filter in the CMS tracker at LHC
Authors:
W. Adam,
R. Frühwirth,
A. Strandlie,
T. Todorov
Abstract:
The bremsstrahlung energy loss distribution of electrons propagating in matter is highly non Gaussian. Because the Kalman filter relies solely on Gaussian probability density functions, it might not be an optimal reconstruction algorithm for electron tracks. A Gaussian-sum filter (GSF) algorithm for electron track reconstruction in the CMS tracker has therefore been developed. The basic idea is…
▽ More
The bremsstrahlung energy loss distribution of electrons propagating in matter is highly non Gaussian. Because the Kalman filter relies solely on Gaussian probability density functions, it might not be an optimal reconstruction algorithm for electron tracks. A Gaussian-sum filter (GSF) algorithm for electron track reconstruction in the CMS tracker has therefore been developed. The basic idea is to model the bremsstrahlung energy loss distribution by a Gaussian mixture rather than a single Gaussian. It is shown that the GSF is able to improve the momentum resolution of electrons compared to the standard Kalman filter. The momentum resolution and the quality of the estimated error are studied with various types of mixture models of the energy loss distribution.
△ Less
Submitted 11 June, 2003;
originally announced June 2003.
-
Vertex reconstruction framework and its implementation for CMS
Authors:
T. Boccali,
R. Fruhwirth,
W. Waltenberger,
K. Prokofiev,
T. Speer,
P. Vanlaer
Abstract:
The class framework developed for vertex reconstruction in CMS is described. We emphasize how we proceed to develop a flexible, efficient and reliable piece of reconstruction software. We describe the decomposition of the algorithms into logical parts, the mathematical toolkit, and the way vertex reconstruction integrates into the CMS reconstruction project ORCA. We discuss the tools that we hav…
▽ More
The class framework developed for vertex reconstruction in CMS is described. We emphasize how we proceed to develop a flexible, efficient and reliable piece of reconstruction software. We describe the decomposition of the algorithms into logical parts, the mathematical toolkit, and the way vertex reconstruction integrates into the CMS reconstruction project ORCA. We discuss the tools that we have developed for algorithm evaluation and optimization and for code release.
△ Less
Submitted 2 June, 2003;
originally announced June 2003.
-
New vertex reconstruction algorithms for CMS
Authors:
R. Fruehwirth,
W. Waltenberger,
K. Prokofiev,
T. Speer,
P. Vanlaer,
E. Chabanat,
N. Estre
Abstract:
The reconstruction of interaction vertices can be decomposed into a pattern recognition problem (``vertex finding'') and a statistical problem (``vertex fitting''). We briefly review classical methods. We introduce novel approaches and motivate them in the framework of high-luminosity experiments like at the LHC. We then show comparisons with the classical methods in relevant physics channels
The reconstruction of interaction vertices can be decomposed into a pattern recognition problem (``vertex finding'') and a statistical problem (``vertex fitting''). We briefly review classical methods. We introduce novel approaches and motivate them in the framework of high-luminosity experiments like at the LHC. We then show comparisons with the classical methods in relevant physics channels
△ Less
Submitted 1 June, 2003;
originally announced June 2003.
