-
Collisionless Shock Acceleration of protons in a plasma slab produced in a gas jet by the collision of two laser-driven hydrodynamic shockwaves
Authors:
J. -R. Marquès,
L. Lancia,
P. Loiseau,
P. Forestier-Colleoni,
M. Tarisien,
E. Atukpor,
V. Bagnoud,
C. Brabetz,
F. Consoli,
J. Domange,
F. Hannachi,
P. Nicolaï,
M. Salvadori,
B. Zielbauer
Abstract:
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by ta…
▽ More
We recently proposed a new technique of plasma tailoring by laser-driven hydrodynamic shockwaves generated on both sides of a gas jet [J.-R. Marquès et al., Phys. Plasmas 28, 023103 (2021)]. In the continuation of this numerical work, we studied experimentally the influence of the tailoring on proton acceleration driven by a high-intensity picosecond-laser, in three cases: without tailoring, by tailoring only the entrance side of the ps-laser, or both sides of the gas jet. Without tailoring the acceleration is transverse to the laser axis, with a low-energy exponential spectrum, produced by Coulomb explosion. When the front side of the gas jet is tailored, a forward acceleration appears, that is significantly enhanced when both the front and back sides of the plasma are tailored. This forward acceleration produces higher energy protons, with a peaked spectrum, and is in good agreement with the mechanism of Collisionless Shock Acceleration (CSA). The spatio-temporal evolution of the plasma profile was characterized by optical shadowgraphy of a probe beam. The refraction and absorption of this beam was simulated by post-processing 3D hydrodynamic simulations of the plasma tailoring. Comparison with the experimental results allowed to estimate the thickness and near-critical density of the plasma slab produced by tailoring both sides of the gas jet. These parameters are in good agreement with those required for CSA.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Plasma density profile reconstruction of a gas cell for Ionization Induced Laser Wakefield Acceleration
Authors:
F. Filippi,
L. T. Dickson,
M. Backhouse,
P. Forestier-Colleoni,
C. Gustafsson,
C. Cobo,
C. Ballage,
S. Dobosz Dufrénoy,
E. Löfquist,
G. Maynard,
C. D. Murphy,
Z. Najmudin,
F. Panza,
A. Persson,
M. Scisciò,
O. Vasilovici,
O. Lundh,
B. Cros
Abstract:
Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability of the acceleration process, which is a key development for the future electron injector proposed by EuPRAXIA. A gas cell was designed by LPGP and LIDYL teams,…
▽ More
Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability of the acceleration process, which is a key development for the future electron injector proposed by EuPRAXIA. A gas cell was designed by LPGP and LIDYL teams, with variable length and backing pressure, to confine the gas and tailor the gas density profile before the arrival of the laser. This cell was used during an experimental campaign with the multi TW-class laser at the Lund Laser Centre. Ionization assisted injection in a tailored density profile is used to tune the electron beam properties. During the experiment, we filled the gas cell with hydrogen mixed with different concentration of nitrogen. We also varied the backing pressure of the gas and the geometrical length of the gas cell. We used a transverse probe to acquire shadowgraphic images of the plasma and to measure the plasma electron density. Methods and results of the analysis with comparisons between shadowgraphic and interferometric images will be discussed.
△ Less
Submitted 8 May, 2023; v1 submitted 19 April, 2023;
originally announced April 2023.
-
An online readout CMOS detector to measure ion spectra produced by high-repetition-rate high-power lasers
Authors:
K. Burdonov,
R. Lelievre,
P. Forestier-Colleoni,
T. Ceccotti,
M. Cuciuc,
L. Lancia,
W. Yao,
J. Fuchs
Abstract:
We present the design and the absolute calibration of charged particle high-repetition-rate online readout CMOS system tailored for high-power laser experiments. This system equips a Thomson parabola (TP) spectrometer, used at the Apollon petawatt scale laser facility to measure the spectra of protons produced by high-intensity laser-target interactions. The RadEye1 CMOS matrixes array detectors a…
▽ More
We present the design and the absolute calibration of charged particle high-repetition-rate online readout CMOS system tailored for high-power laser experiments. This system equips a Thomson parabola (TP) spectrometer, used at the Apollon petawatt scale laser facility to measure the spectra of protons produced by high-intensity laser-target interactions. The RadEye1 CMOS matrixes array detectors are paired with a custom triggering system for image grabbing. This allows us to register the proton and ion signals remotely at a high-repetition-rate. The latter is presently of one shot/min, but the frame grabbing enables the system to be compatible with modern high-power lasers running e.g. at 10 Hz. We detail here the implementation, in the harsh electromagnetic environment of such interactions, of the system, and its absolute calibration of the RadEye CMOS matrices, which was performed for proton energies from 4 MeV to 20 MeV.
△ Less
Submitted 15 March, 2023;
originally announced March 2023.
-
Characterization and performance of the Apollon Short-Focal-Area facility following its commissioning at 1 PW level
Authors:
K. Burdonov,
A. Fazzini,
V. Lelasseux,
J. Albrecht,
P. Antici,
Y. Ayoul,
A. Beluze,
D. Cavanna,
T. Ceccotti,
M. Chabanis,
A. Chaleil,
S. N. Chen,
Z. Chen,
F. Consoli,
M. Cuciuc,
X. Davoine,
J. P. Delaneau,
E. d'Humières,
J-L. Dubois,
C. Evrard,
E. Filippov,
A. Freneaux,
P. Forestier-Colleoni,
L. Gremillet,
V. Horny
, et al. (23 additional authors not shown)
Abstract:
We present the results of the first commissioning phase of the ``short focal length'' area (SFA) of the Apollon laser facility (located in Saclay, France), which was performed with the first available laser beam (F2), scaled to a nominal power of one petawatt. Under the conditions that were tested, this beam delivered on target pulses of 10 J average energy and 24 fs duration. Several diagnostics…
▽ More
We present the results of the first commissioning phase of the ``short focal length'' area (SFA) of the Apollon laser facility (located in Saclay, France), which was performed with the first available laser beam (F2), scaled to a nominal power of one petawatt. Under the conditions that were tested, this beam delivered on target pulses of 10 J average energy and 24 fs duration. Several diagnostics were fielded to assess the performance of the facility. The on-target focal spot, its spatial stability, the temporal intensity profile prior to the main pulse, as well as the resulting density gradient formed at the irradiated side of solid targets, have been thoroughly characterized, with the goal of hel** users design future experiments. Emissions of energetic electrons, ions, and electromagnetic radiation were recorded, showing good laser-to-target coupling efficiency and an overall performance comparable with that of similar international facilities. This will be followed in 2022 by a further commissioning stage at the multi-petawatt level.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
Calibration of the scintillation of cerium-doped yttrium aluminum garnet crystals irradiated by monoenergetic 4 MeV energy electrons
Authors:
K. Burdonov,
P. Forestier-Colleoni,
J. -N. Cayla,
T. Ceccotti,
S. Chance,
V. Chaumat,
N. Delerue,
H. Guler,
V. Lelasseux,
B. Lucas,
J. Fuchs
Abstract:
This paper presents the results of measurements of fluorescing cerium-doped yttrium aluminum garnet crystals after being irradiated by an accelerated electron beam with energy of around 4 MeV. The measurements were performed using the PHIL linear accelerator at LAL (France). We observe linear dependence of the crystal emission to the electron beam charge and the isotropy of the photon emission. We…
▽ More
This paper presents the results of measurements of fluorescing cerium-doped yttrium aluminum garnet crystals after being irradiated by an accelerated electron beam with energy of around 4 MeV. The measurements were performed using the PHIL linear accelerator at LAL (France). We observe linear dependence of the crystal emission to the electron beam charge and the isotropy of the photon emission. We provide the calibration coefficients of the photon emission depending on the charge of the accelerated electron beam for two crystals originating from two different manufacturers.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Laser-driven strong magnetostatic fields with applications to charged beam transport and magnetized high energy-density physics
Authors:
J. J. Santos,
M. Bailly-Grandvaux,
M. Ehret,
A. V. Arefiev,
D. Batani,
F. N. Beg,
A. Calisti,
S. Ferri,
R. Florido,
P. Forestier-Colleoni,
S. Fujioka,
M. A. Gigosos,
L. Giuffrida,
L. Gremillet,
. J. Honrubia,
S. Kojima,
Ph. Korneev,
K. F. F. Law,
J. -R. Marquès,
A. Morace,
C. Mossé,
O. Peyrusse,
S. Rose,
M. Roth,
S. Sakata
, et al. (6 additional authors not shown)
Abstract:
Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is th…
▽ More
Powerful laser-plasma processes are explored to generate discharge currents of a few $100\,$kA in coil targets, yielding magnetostatic fields (B-fields) in excess of $0.5\,$kT. The quasi-static currents are provided from hot electron ejection from the laser-irradiated surface. According to our model, describing qualitatively the evolution of the discharge current, the major control parameter is the laser irradiance $I_{\mathrm{las}}λ_{\mathrm{las}}^2$. The space-time evolution of the B-fields is experimentally characterized by high-frequency bandwidth B-dot probes and by proton-deflectometry measurements. The magnetic pulses, of ns-scale, are long enough to magnetize secondary targets through resistive diffusion. We applied it in experiments of laser-generated relativistic electron transport into solid dielectric targets, yielding an unprecedented 5-fold enhancement of the energy-density flux at $60 \,\mathrm{μm}$ depth, compared to unmagnetized transport conditions. These studies pave the ground for magnetized high-energy density physics investigations, related to laser-generated secondary sources of radiation and/or high-energy particles and their transport, to high-gain fusion energy schemes and to laboratory astrophysics.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Guiding of relativistic electron beams in dense matter by longitudinally imposed strong magnetic fields
Authors:
M. Bailly-Grandvaux,
J. J. Santos,
C. Bellei,
P. Forestier-Colleoni,
S. Fujioka,
L. Giuffrida,
J. J. Honrubia,
D. Batani,
R. Bouillaud,
M. Chevrot,
J. E. Cross,
R. Crowston,
S. Dorard,
J. -L. Dubois,
M. Ehret,
G. Gregori,
S. Hulin,
S. Kojima,
E. Loyez,
J. -R. Marques,
A. Morace,
Ph. Nicolai,
M. Roth,
S. Sakata,
G. Schaumann
, et al. (5 additional authors not shown)
Abstract:
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting a…
▽ More
High-energy-density flows through dense matter are needed for effective progress in the production of laser-driven intense sources of energetic particles and radiation, in driving matter to extreme temperatures creating state regimes relevant for planetary or stellar science as yet inaccessible at the laboratory scale, or in achieving high-gain laser-driven thermonuclear fusion. When interacting at the surface of dense (opaque) targets, intense lasers accelerate relativistic electron beams which transport a significant fraction of the laser energy into the target depth. However, the overall laser-to-target coupling efficiency is impaired by the large divergence of the electron beam, intrinsic to the laser-plasma interaction. By imposing a longitudinal 600T laser-driven magnetic-field, our experimental results show guided >10MA-current of MeV-electrons in solid matter. Due to the applied magnetic field, the transported energy-density and the peak background electron temperature at the 60micron-thick targets rear surface rise by factors 5, resulting from unprecedentedly efficient guiding of relativistic electron currents.
△ Less
Submitted 29 August, 2016;
originally announced August 2016.
-
Laser-driven platform for generation and characterization of strong quasi-static magnetic fields
Authors:
J. J. Santos,
M. Bailly-Grandvaux,
L. Giuffrida,
P. Forestier-Colleoni,
S. Fujioka,
Z. Zhang,
Ph. Korneev,
R. Bouillaud,
S. Dorard,
D. Batani,
M. Chevrot,
J. Cross,
R. Crowston,
J. -L. Dubois,
J. Gazave,
G. Gregori,
E. d'Humières,
S. Hulin,
K. Ishihara,
S. Kojima,
E. Loyez,
J. -R. Marquès,
A. Morace,
Ph. Nicolaï,
O. Peyrusse
, et al. (9 additional authors not shown)
Abstract:
Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from…
▽ More
Quasi-static magnetic-fields up to $800\,$T are generated in the interaction of intense laser pulses ($500\,$J, $1\,$ns, $10^{17}\,$W/cm$^2$) with capacitor-coil targets of different materials. The reproducible magnetic-field peak and rise-time, consistent with the laser pulse duration, were accurately inferred from measurements with GHz-bandwidth inductor pickup coils (B-dot probes). Results from Faraday rotation of polarized optical laser light and deflectometry of energetic proton beams are consistent with the B-dot probe measurements at the early stages of the target charging, up to $t\approx 0.35\,$ns, and then are disturbed by radiation and plasma effects. The field has a dipole-like distribution over a characteristic volume of $1\,$mm$^3$, which is coherent with theoretical expectations. These results demonstrate a very efficient conversion of the laser energy into magnetic fields, thus establishing a robust laser-driven platform for reproducible, well characterized, generation of quasi-static magnetic fields at the kT-level, as well as for magnetization and accurate probing of high-energy-density samples driven by secondary powerful laser or particle beams.
△ Less
Submitted 8 June, 2015; v1 submitted 1 March, 2015;
originally announced March 2015.