-
Coherent Imaging with Photonic Lanterns
Authors:
Yoo Jung Kim,
Michael P. Fitzgerald,
Jonathan Lin,
Steph Sallum,
Yinzi Xin,
Nemanja Jovanovic,
Sergio Leon-Saval
Abstract:
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pup…
▽ More
Photonic Lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers (SMFs). They can efficiently couple multi-mode telescope light into a multi-mode fiber entrance at the focal plane and convert it into multiple single-mode beams. Thus, each SMF samples its unique mode (lantern principal mode) of the telescope light in the pupil, analogous to subapertures in aperture masking interferometry (AMI). Coherent imaging with PLs can be enabled by interfering SMF outputs and applying phase modulation, which can be achieved using a photonic chip beam combiner at the backend (e.g., the ABCD beam combiner). In this study, we investigate the potential of coherent imaging by interfering SMF outputs of a PL with a single telescope. We demonstrate that the visibilities that can be measured from a PL are mutual intensities incident on the pupil weighted by the cross-correlation of a pair of lantern modes. From numerically simulated lantern principal modes of a 6-port PL, we find that interferometric observables using a PL behave similarly to separated-aperture visibilities for simple models on small angular scales ($<λ/D$) but with greater sensitivity to symmetries and capability to break phase angle degeneracies. Furthermore, we present simulated observations with wavefront errors and compare them to AMI. Despite the redundancy caused by extended lantern principal modes, spatial filtering offers stability to wavefront errors. Our simulated observations suggest that PLs may offer significant benefits in the photon noise-limited regime and in resolving small angular scales at low contrast regime.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization
Authors:
Jonathan Lin,
Michael P. Fitzgerald,
Yinzi Xin,
Yoo Jung Kim,
Olivier Guyon,
Sergio Leon-Saval,
Barnaby Norris,
Nemanja Jovanovic
Abstract:
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact o…
▽ More
We present numerical characterizations of the wavefront sensing performance for few-mode photonic lantern wavefront sensors (PLWFSs). These characterizations include calculations of throughput, control space, sensor linearity, and an estimate of maximum linear reconstruction range for standard and hybrid lanterns with 3 to 19 ports, at a wavelength of 1550 nm. We additionally consider the impact of beam-sha** optics and a charge-1 vortex mask, placed in the pupil plane. The former is motivated by the application of PLs to high-resolution spectroscopy, which could enable efficient injection into the spectrometer along with simultaneous focal-plane wavefront sensing; similarly, the latter is motivated by the application of PLs to vortex fiber nulling (VFN), which can simultaneously enable wavefront sensing and the nulling of on-axis starlight. Overall, we find that the PLWFS setups tested in this work exhibit good linearity out to ~0.25-0.5 radians of RMS wavefront error (WFE). Meanwhile, we estimate the maximum amount of WFE that can be handled by these sensors, before the sensor response becomes degenerate, to be around ~1-2 radians RMS. In the future, we expect these limits can be pushed further by increasing the number of degrees of freedom, either by adopting higher-mode-count lanterns, dispersing lantern outputs, or separating polarizations. Lastly, we consider optimization strategies for the design of the PLWFS, which involve both modification of the lantern itself and the use of pre- and post-lantern optics like phase masks and interferometric beam recombiners.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
The path to detecting extraterrestrial life with astrophotonics
Authors:
Nemanja Jovanovic,
Yinzi Xin,
Michael P. Fitzgerald,
Olivier Guyon,
Peter Tuthill,
Barnaby Norris,
Pradip Gatkine,
Greg Sercel,
Svarun Soda,
Yoo Jung Kim,
Jonathan Lin,
Sergio Leon-Saval,
Rodrigo Amezcua-Correa,
Stephanos Yerolatsitis,
Julien Lozi,
Sebastien Vievard,
Chris Betters,
Steph Sallum,
Daniel Levinstein,
Dimitri Mawet,
Jeffrey Jewell,
J. Kent Wallace,
Nick Cvetojevic
Abstract:
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far,…
▽ More
Astrophysical research into exoplanets has delivered thousands of confirmed planets orbiting distant stars. These planets span a wide ranges of size and composition, with diversity also being the hallmark of system configurations, the great majority of which do not resemble our own solar system. Unfortunately, only a handful of the known planets have been characterized spectroscopically thus far, leaving a ga** void in our understanding of planetary formation processes and planetary types. To make progress, astronomers studying exoplanets will need new and innovative technical solutions. Astrophotonics -- an emerging field focused on the application of photonic technologies to observational astronomy -- provides one promising avenue forward. In this paper we discuss various astrophotonic technologies that could aid in the detection and subsequent characterization of planets and in particular themes leading towards the detection of extraterrestrial life.
△ Less
Submitted 15 September, 2023;
originally announced September 2023.
-
Searching for Exoplanets Using a Microresonator Astrocomb
Authors:
Myoung-Gyun Suh,
Xu Yi,
Yu-Hung Lai,
S. Leifer,
Ivan S. Grudinin,
G. Vasisht,
Emily C. Martin,
Michael P. Fitzgerald,
G. Doppmann,
J. Wang,
D. Mawet,
Scott B. Papp,
Scott A. Diddams,
C. Beichman,
Kerry Vahala
Abstract:
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous applic…
▽ More
Detection of weak radial velocity shifts of host stars induced by orbiting planets is an important technique for discovering and characterizing planets beyond our solar system. Optical frequency combs enable calibration of stellar radial velocity shifts at levels required for detection of Earth analogs. A new chip-based device, the Kerr soliton microcomb, has properties ideal for ubiquitous application outside the lab and even in future space-borne instruments. Moreover, microcomb spectra are ideally suited for astronomical spectrograph calibration and eliminate filtering steps required by conventional mode-locked-laser frequency combs. Here, for the calibration of astronomical spectrographs, we demonstrate an atomic/molecular line-referenced, near-infrared soliton microcomb. Efforts to search for the known exoplanet HD 187123b were conducted at the Keck-II telescope as a first in-the-field demonstration of microcombs.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
