-
Hardware Realization of Neuromorphic Computing with a 4-Port Photonic Reservoir for Modulation Format Identification
Authors:
Enes Şeker,
Rijil Thomas,
Guillermo von Hünefeld,
Stephan Suckow,
Mahdi Kaveh,
Gregor Ronniger,
Pooyan Safari,
Isaac Sackey,
David Stahl,
Colja Schubert,
Johannes Karl Fischer,
Ronald Freund,
Max C. Lemme
Abstract:
The fields of machine learning and artificial intelligence drive researchers to explore energy-efficient, brain-inspired new hardware. Reservoir computing encompasses recurrent neural networks for sequential data processing and matches the performance of other recurrent networks with less training and lower costs. However, traditional software-based neural networks suffer from high energy consumpt…
▽ More
The fields of machine learning and artificial intelligence drive researchers to explore energy-efficient, brain-inspired new hardware. Reservoir computing encompasses recurrent neural networks for sequential data processing and matches the performance of other recurrent networks with less training and lower costs. However, traditional software-based neural networks suffer from high energy consumption due to computational demands and massive data transfer needs. Photonic reservoir computing overcomes this challenge with energy-efficient neuromorphic photonic integrated circuits or NeuroPICs. Here, we introduce a reservoir NeuroPIC used for modulation format identification in C-band telecommunication network monitoring. It is built on a silicon-on-insulator platform with a 4-port reservoir architecture consisting of a set of physical nodes connected via delay lines. We comprehensively describe the NeuroPIC design and fabrication, experimentally demonstrate its performance, and compare it with simulations. The NeuroPIC incorporates non-linearity through a simple digital readout and achieves close to 100% accuracy in identifying several configurations of quadrature amplitude modulation formats transmitted over 20 km of optical fiber at 32 GBaud symbol rate. The NeuroPIC performance is robust against fabrication imperfections like waveguide propagation loss, phase randomization, etc. and delay line length variations. Furthermore, the experimental results exceeded numerical simulations, which we attribute to enhanced signal interference in the experimental NeuroPIC output. Our energy-efficient photonic approach has the potential for high-speed temporal data processing in a variety of applications.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Design and characterisation of an antiproton deceleration beamline for the PUMA experiment
Authors:
J. Fischer,
A. Schmidt,
N. Azaryan,
F. Butin,
J. Ferreira Somoza,
A. Husson,
C. Klink,
A. Obertelli,
M. Schlaich,
A. Sinturel,
N. Thaus,
F. Wienholtz
Abstract:
We report on the design and characterization of an antiproton deceleration beamline, based on a pulsed drift tube, for the PUMA experiment at the Antimatter Factory at CERN. The design has been tailored to high-voltage (100 kV) and ultra-high vacuum (below $10^{-10}$ mbar) conditions. A first operation achieved decelerating antiprotons from an initial energy of 100 keV down to ($3898\pm 3$) eV, ma…
▽ More
We report on the design and characterization of an antiproton deceleration beamline, based on a pulsed drift tube, for the PUMA experiment at the Antimatter Factory at CERN. The design has been tailored to high-voltage (100 kV) and ultra-high vacuum (below $10^{-10}$ mbar) conditions. A first operation achieved decelerating antiprotons from an initial energy of 100 keV down to ($3898\pm 3$) eV, marking the initial stage in trap** antiprotons for the PUMA experiment. Employing a high-voltage ram** scheme, the pressure remains below $2\cdot 10^{-10}$ mbar upstream of the pulsed drift tube for 75% of the cycle time. The beamline reached a transmission of ($55 \pm 3$)% for antiprotons decelerated to 4 keV. The beam is focused on a position sensitive detector to a spot with horizontal and vertical standard deviations of $σ_\mathrm{horiz}$ = ($3.0 \pm 0.1$) mm and $σ_\mathrm{vert}$ = ($3.8 \pm 0.2$) mm, respectively. This spot size is within the acceptance of the PUMA Penning trap.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Student gender modulates the intersection of calculus proficiency and calculus self-efficacy in an introductory electricity and magnetism course
Authors:
Christopher J. Fischer,
Jennifer Delgado,
Sarah LeGresley,
Jessy Changstrom
Abstract:
We assessed changes in calculus proficiency and calculus self-efficacy in a second semester course of introductory physics focused on electricity and magnetism. While all students demonstrated an increase in calculus proficiency, including a possible improvement in calculus transfer to physics, women displayed larger gains than men. Conversely, men showed larger gains in calculus self-efficacy. Wh…
▽ More
We assessed changes in calculus proficiency and calculus self-efficacy in a second semester course of introductory physics focused on electricity and magnetism. While all students demonstrated an increase in calculus proficiency, including a possible improvement in calculus transfer to physics, women displayed larger gains than men. Conversely, men showed larger gains in calculus self-efficacy. When combined, these data suggest that student identity modulates the correlation between a student's calculus abilities and their perception or self-evaluation of those abilities. These data highlight a potential contributing factor to gender-related differences in physics self-efficacy as well as the complexity of addressing those differences.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
A multi-reflection time-of-flight mass spectrometer for the offline ion source of the PUMA experiment
Authors:
M. Schlaich,
J. Fischer,
P. Fischer,
C. Klink,
A. Obertelli,
A. Schmidt,
L. Schweikhard,
F. Wienholtz
Abstract:
The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims at investigating the nucleon composition in the matter density tail of radioactive as well as stable isotopes by use of low-energy antiproton-nucleon annihilation processes. For this purpose, antiprotons provided by the Extra Low ENergy Antiproton (ELENA) facility will be trapped together with the ions of interest. While ex…
▽ More
The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims at investigating the nucleon composition in the matter density tail of radioactive as well as stable isotopes by use of low-energy antiproton-nucleon annihilation processes. For this purpose, antiprotons provided by the Extra Low ENergy Antiproton (ELENA) facility will be trapped together with the ions of interest. While exotic ions will be obtained by the Isotope mass Separator On-Line DEvice (ISOLDE), stable ions will be delivered from an offline ion source setup designed for this purpose. This allows the proposed technique to be applied to a variety of stable nuclei and for reference measurements. For beam purification, the ion source setup includes a multi-reflection time-of-flight mass spectrometer (MR-ToF MS). Supported by SIMION simulations, an earlier MR-ToF MS design has been modified to meet the requirements of PUMA. During commissioning of the new MR-ToF device with Ar$^+$ ions, mass resolving powers in excess of 50,000 have been obtained after 150 revolutions, limited by the chop** of the continuous beam from an electron impact ionisation source.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Preservation of the High Quality Factor and Accelerating Gradient of Nb3Sn-coated Cavity During Pair Assembly
Authors:
G. Eremeev,
U. Pudasaini,
S. Cheban,
J. Fischer,
D. Forehand,
S. Posen,
A. Reilly,
R. Rimmer,
B. Tennis
Abstract:
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble…
▽ More
Two CEBAF 5-cell accelerator cavities have been coated with Nb3Sn film using the vapor diffusion technique. One cavity was coated in the Jefferson Lab Nb3Sn cavity coating system, and the other in the Fermilab Nb3Sn coating system. Both cavities were measured at 4 K and 2 K in the vertical dewar test in each lab and then assembled into a cavity pair at Jefferson Lab. Previous attempts to assemble Nb3Sn cavities into a cavity pair degraded the superconducting properties of Nb3Sn-coated cavities. This contribution discusses the efforts to identify and mitigate the pair assembly challenges and will present the results of the vertical tests before and after pair assembly. Notably, one of the cavities reached the highest gradient above 80 mT in the vertical test after the pair assembly.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
LapGM: A Multisequence MR Bias Correction and Normalization Model
Authors:
Luciano Vinas,
Arash A. Amini,
Jade Fischer,
Atchar Sudhyadhom
Abstract:
A spatially regularized Gaussian mixture model, LapGM, is proposed for the bias field correction and magnetic resonance normalization problem. The proposed spatial regularizer gives practitioners fine-tuned control between balancing bias field removal and preserving image contrast preservation for multi-sequence, magnetic resonance images. The fitted Gaussian parameters of LapGM serve as control v…
▽ More
A spatially regularized Gaussian mixture model, LapGM, is proposed for the bias field correction and magnetic resonance normalization problem. The proposed spatial regularizer gives practitioners fine-tuned control between balancing bias field removal and preserving image contrast preservation for multi-sequence, magnetic resonance images. The fitted Gaussian parameters of LapGM serve as control values which can be used to normalize image intensities across different patient scans. LapGM is compared to well-known debiasing algorithm N4ITK in both the single and multi-sequence setting. As a normalization procedure, LapGM is compared to known techniques such as: max normalization, Z-score normalization, and a water-masked region-of-interest normalization. Lastly a CUDA-accelerated Python package $\texttt{lapgm}$ is provided from the authors for use.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Implementing Competency-Based Grading Improves the Performance of Women and First Generation Students in Introductory Physics
Authors:
Matthew Richard,
Jennifer Delgado,
Sarah LeGresley,
Christopher J. Fischer
Abstract:
We present a model for competency-based grading for calculus-based introductory physics that encourages students to obtain proficiency with all course content. By allowing students to continually improve their proficiency with skills and content throughout the semester, this formative grading system is designed to create a more flexible learning environment that better accommodates the varying sch…
▽ More
We present a model for competency-based grading for calculus-based introductory physics that encourages students to obtain proficiency with all course content. By allowing students to continually improve their proficiency with skills and content throughout the semester, this formative grading system is designed to create a more flexible learning environment that better accommodates the varying schedules and needs of students. While all students show improvement in their performance following the implementation of this grading system, the largest gains were found for women and first generation students, both of whom often pose a retention risk in science and engineering degree programs.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Bright Purcell enhanced single-photon source in the telecom O-band based on a quantum dot in a circular Bragg grating
Authors:
Sascha Kolatschek,
Cornelius Nawrath,
Stephanie Bauer,
Jiasheng Huang,
Julius Fischer,
Robert Sittig,
Michael Jetter,
Simone L. Portalupi,
Peter Michler
Abstract:
The combination of semiconductor quantum dots (QDs) with photonic cavities is a promising way to realize non-classical light sources with state-of-the-art performances in terms of brightness, indistinguishability and repetition rate. In the present work we demonstrate the coupling of an InGaAs/GaAs QDs emitting in the telecom O-band to a circular Bragg grating cavity. We demonstrate a broadband ge…
▽ More
The combination of semiconductor quantum dots (QDs) with photonic cavities is a promising way to realize non-classical light sources with state-of-the-art performances in terms of brightness, indistinguishability and repetition rate. In the present work we demonstrate the coupling of an InGaAs/GaAs QDs emitting in the telecom O-band to a circular Bragg grating cavity. We demonstrate a broadband geometric extraction efficiency enhancement by investigating two emission lines under above-band excitation, inside and detuned from the cavity mode, respectively. In the first case, a Purcell enhancement of 4 is attained. For the latter case, an end-to-end brightness of 1.4% with a brightness at the first lens of 23% is achieved. Using p-shell pum**, a combination of high count rate with pure single-photon emission (g(2)(0) = 0.01 in saturation) is achieved. Finally a good single-photon purity (g(2)(0) = 0.13) together with a high detector count rate of 191kcps is demonstrated for a temperature of up to 77K.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
The Formation and Structure of Olympic Gels
Authors:
Jakob Fischer,
Michael Lang,
Jens-Uwe Sommer
Abstract:
Different methods for creating Olympic gels are analyzed using computer simulations. First ideal reference samples are obtained from freely interpenetrating semi-dilute solutions and melts of cyclic polymers. The distribution of pairwise concatenations per cyclic molecule is given by a Poisson-distribution and can be used to describe the elastic structure of the gels. Several batches of linear cha…
▽ More
Different methods for creating Olympic gels are analyzed using computer simulations. First ideal reference samples are obtained from freely interpenetrating semi-dilute solutions and melts of cyclic polymers. The distribution of pairwise concatenations per cyclic molecule is given by a Poisson-distribution and can be used to describe the elastic structure of the gels. Several batches of linear chains decorated with different selectively binding groups at their ends are mixed in the "DNA Origami" technique and network formation is realized. While the formation of cyclic molecules follows mean field predictions below overlap of the precursor molecules, an enhanced ring formation above overlap is found that is not explained by mean field arguments. The "progressive construction" method allows to create Olympic gels with a single reaction step from a concentrated mixture of large compressed rings with a low weight fraction short chains that are below overlap concentration. This method, however, is limited by the difficulty to obtain a sufficiently high degree of polymerization of the large rings.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
The Complex Community Structure of the Bitcoin Address Correspondence Network
Authors:
Jan Alexander Fischer,
Andres Palechor,
Daniele Dell'Aglio,
Abraham Bernstein,
Claudio J. Tessone
Abstract:
Bitcoin is built on a blockchain, an immutable decentralised ledger that allows entities (users) to exchange Bitcoins in a pseudonymous manner. Bitcoins are associated with alpha-numeric addresses and are transferred via transactions. Each transaction is composed of a set of input addresses (associated with unspent outputs received from previous transactions) and a set of output addresses (to whic…
▽ More
Bitcoin is built on a blockchain, an immutable decentralised ledger that allows entities (users) to exchange Bitcoins in a pseudonymous manner. Bitcoins are associated with alpha-numeric addresses and are transferred via transactions. Each transaction is composed of a set of input addresses (associated with unspent outputs received from previous transactions) and a set of output addresses (to which Bitcoins are transferred). Despite Bitcoin was designed with anonymity in mind, different heuristic approaches exist to detect which addresses in a specific transaction belong to the same entity. By applying these heuristics, we build an Address Correspondence Network: in this representation, addresses are nodes are connected with edges if at least one heuristic detects them as belonging to the same entity. %addresses are nodes and edges are drawn between addresses detected as belonging to the same entity by at least one heuristic. %nodes represent addresses and edges model the likelihood that two nodes belong to the same entity %In this network, connected components represent sets of addresses controlled by the same entity. In this paper, we analyse for the first time the Address Correspondence Network and show it is characterised by a complex topology, signalled by a broad, skewed degree distribution and a power-law component size distribution. Using a large-scale dataset of addresses for which the controlling entities are known, we show that a combination of external data coupled with standard community detection algorithms can reliably identify entities. The complex nature of the Address Correspondence Network reveals that usage patterns of individual entities create statistical regularities; and that these regularities can be leveraged to more accurately identify entities and gain a deeper understanding of the Bitcoin economy as a whole.
△ Less
Submitted 19 May, 2021;
originally announced May 2021.
-
Olympic Gels: Concatenation and Swelling
Authors:
Michael Lang,
Jakob Fischer,
Marco Werner,
Jens-Uwe Sommer
Abstract:
Concatenation and equilibrium swelling of Olympic gels, which are composed of entangled cyclic polymers, is studied by Monte Carlo Simulations. The average number of concatenated molecules per cyclic polymers, $f_n$, is found to depend on the degree of polymerization, $N$, and polymer volume fraction at network preparation, $φ_0$, as $f_n ~ φ_0^{ν/(3ν-1)}N$ with scaling exponent $ν = 0.588$. In co…
▽ More
Concatenation and equilibrium swelling of Olympic gels, which are composed of entangled cyclic polymers, is studied by Monte Carlo Simulations. The average number of concatenated molecules per cyclic polymers, $f_n$, is found to depend on the degree of polymerization, $N$, and polymer volume fraction at network preparation, $φ_0$, as $f_n ~ φ_0^{ν/(3ν-1)}N$ with scaling exponent $ν = 0.588$. In contrast to chemically cross-linked polymer networks, we observe that Olympic gels made of longer cyclic chains exhibit a smaller equilibrium swelling degree, $Q ~ N^{-0.28} φ_0^{-0.72}$, at the same polymer volume fraction $φ_0$. This observation is explained by a desinterspersion process of overlap** non-concatenated rings upon swelling, which is tested directly by analyzing the change in overlap of the molecules upon swelling.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Fluid leakage in metallic seals
Authors:
F. J. Fischer,
K. Schmitz,
A. Tiwari,
B. N. J. Persson
Abstract:
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications…
▽ More
Metallic seals are crucial machine elements in many important applications, e.g., in ultrahigh vacuum systems. Due to the high elastic modulus of metals, and the surface roughness which exists on all solid surfaces, if no plastic deformation would occur one expects in most cases large fluid flow channels between the contacting metallic bodies, and large fluid leakage. However, in most applications plastic deformation occurs, at least at the asperity level, which allows the surfaces to approach each other to such an extent that fluid leakage often can be neglected. In this study, we present an experimental set-up for studying the fluid leakage in metallic seals. We study the water leakage between a steel sphere and a steel body (seat) with a conical surface. The experimental results are found to be in good quantitative agreement with a (fitting-parameter-free) theoretical model. The theory predicts that the plastic deformations reduce the leak-rate by a factor $\approx 8$
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
On the Dynamics of the Flow and the Sound Field of an Organ Pipes's Mouth Region
Authors:
Jost Leonhardt Fischer,
Rolf Bader,
Markus Abel
Abstract:
The dynamics of an organ pipe's mouth region has been studied by numerical simulations. The investigations presented here were carried out by solving the compressible Navier-Stokes equations under suitable initial and boundary conditions using parts of the open source C++ toolbox OpenFOAM. The focus of the study is on the examination of the velocity field close to the jet. The components of the ve…
▽ More
The dynamics of an organ pipe's mouth region has been studied by numerical simulations. The investigations presented here were carried out by solving the compressible Navier-Stokes equations under suitable initial and boundary conditions using parts of the open source C++ toolbox OpenFOAM. The focus of the study is on the examination of the velocity field close to the jet. The components of the velocity field sampled at a cross-section spanning the mouth were analyzed by using methods of coarse-graining. It is shown that the dynamics of the sampled velocity field can be separated into two fractions, a velocity component mainly comprising the jet's flow velocity and a component that essentially carries particle velocity caused by back-propagating sound waves inside the resonator. The SPL-spectra calculated of the data sets of the numerical simulations are compared with the measurements on real organ pipes. The phase-space representations of sound pressure and particle velocity indicate the presence of nonlinearities in the organ pipes's mouth region. The numerical results are consistent with measurements on real organ pipes.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
Gd(III)-Gd(III) RIDME for In-Cell EPR Distance Determination
Authors:
Mykhailo Azarkh,
Anna Bieber,
Mian Qi,
Jörg W. A. Fischer,
Maxim Yulikov,
Adelheid Godt,
Malte Drescher
Abstract:
In-cell distance determination by EPR reveals essential structural information about biomacromolecules under native conditions. We demonstrate that the pulsed EPR technique RIDME (relaxation induced dipolar modulation enhancement) can be utilized for such distance determination. The performance of in-cell RIDME has been assessed at Q band using stiff molecular rulers labelled with Gd(III)-PyMTA ta…
▽ More
In-cell distance determination by EPR reveals essential structural information about biomacromolecules under native conditions. We demonstrate that the pulsed EPR technique RIDME (relaxation induced dipolar modulation enhancement) can be utilized for such distance determination. The performance of in-cell RIDME has been assessed at Q band using stiff molecular rulers labelled with Gd(III)-PyMTA tags and microinjected into X. laevis oocytes. The overtone coefficients are determined to be the same for protonated aqueous solutions and inside cells. As compared to in-cell DEER (double electron-electron resonance, also abbreviated as PELDOR), in-cell RIDME features approximately 5 times larger modulation depth and does not show artificial broadening in the distance distributions due to the effect of pseudo-secular terms.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Microsolvation of phthalocyanine molecules in superfluid helium nanodroplets as revealed by the optical line shape at the electronic origin
Authors:
Stefan Fuchs,
Johannes Fischer,
Alkwin Slenczka,
Mallikarjun Karra,
Bretislav Friedrich
Abstract:
We investigate the solvent shift of phthalocyanine (Pc) doped into superfluid helium droplets and probed by optical spectroscopy at the electronic origin. Our present work complements extant studies and provides results that in part contradict previous conclusions. In particular, the solvent shift does not increase monotonously with droplet radius all the way up to the bulk limit, but exhibits a t…
▽ More
We investigate the solvent shift of phthalocyanine (Pc) doped into superfluid helium droplets and probed by optical spectroscopy at the electronic origin. Our present work complements extant studies and provides results that in part contradict previous conclusions. In particular, the solvent shift does not increase monotonously with droplet radius all the way up to the bulk limit, but exhibits a turnaround instead. Moreover, a substructure is resolved, whose characteristics depend on the droplet size. This behavior can hardly be reconciled with that of a freely rotating Pc-helium complex.
△ Less
Submitted 11 January, 2018;
originally announced January 2018.
-
Review: Far-Infrared Instrumentation and Technology Development for the Next Decade
Authors:
Duncan Farrah,
Kimberly Ennico Smith,
David Ardila,
Charles M. Bradford,
Michael Dipirro,
Carl Ferkinhoff,
Jason Glenn,
Paul Goldsmith,
David Leisawitz,
Thomas Nikola,
Naseem Rangwala,
Stephen A. Rinehart,
Johannes Staguhn,
Michael Zemcov,
Jonas Zmuidzinas,
James Bartlett,
Sean Carey,
William J. Fischer,
Julia Kamenetzky,
Jeyhan Kartaltepe,
Mark Lacy,
Dariusz C. Lis,
Lisa Locke,
Enrique Lopez-Rodriguez,
Meredith MacGregor
, et al. (11 additional authors not shown)
Abstract:
Far-infrared astronomy has advanced rapidly since its inception in the late 1950's, driven by a maturing technology base and an expanding community of researchers. This advancement has shown that observations at far-infrared wavelengths are important in nearly all areas of astrophysics, from the search for habitable planets and the origin of life, to the earliest stages of galaxy assembly in the f…
▽ More
Far-infrared astronomy has advanced rapidly since its inception in the late 1950's, driven by a maturing technology base and an expanding community of researchers. This advancement has shown that observations at far-infrared wavelengths are important in nearly all areas of astrophysics, from the search for habitable planets and the origin of life, to the earliest stages of galaxy assembly in the first few hundred million years of cosmic history. The combination of a still develo** portfolio of technologies, particularly in the field of detectors, and a widening ensemble of platforms within which these technologies can be deployed, means that far-infrared astronomy holds the potential for paradigm-shifting advances over the next decade. In this review, we examine current and future far-infrared observing platforms, including ground-based, sub-orbital, and space-based facilities, and discuss the technology development pathways that will enable and enhance these platforms to best address the challenges facing far-infrared astronomy in the 21st century.
△ Less
Submitted 8 January, 2019; v1 submitted 7 September, 2017;
originally announced September 2017.
-
A mechanical model for phase-separation in debris flow
Authors:
Shiva P. Pudasaini,
Jan-Thomas Fischer
Abstract:
Understanding the physics of phase-separation between solid and fluid phases as a mixture mass moves down slope is a long-standing challenge. Here, we propose an extension of the two phase mass flow model (Pudasaini, 2012) by including a new mechanism, called separation-flux, that leads to strong phase-separation in avalanche and debris flows while balancing the enhanced solid flux with the reduce…
▽ More
Understanding the physics of phase-separation between solid and fluid phases as a mixture mass moves down slope is a long-standing challenge. Here, we propose an extension of the two phase mass flow model (Pudasaini, 2012) by including a new mechanism, called separation-flux, that leads to strong phase-separation in avalanche and debris flows while balancing the enhanced solid flux with the reduced fluid flux. The separation flux mechanism is capable of describing the dynamically evolving phase-separation and levee formation in a multi-phase, geometrically three-dimensional debris flow. These are often observed phenomena in natural debris flows and industrial processes that involve the transportation of particulate solid-fluid mixture material. The novel separation-flux model includes several dominant physical and mechanical aspects such as pressure gradients, volume fractions of solid and fluid phases and their gradients, shear-rates, flow depth, material friction, viscosity, material densities, topographic constraints, grain size, etc. Due to the inherent separation mechanism, as the mass moves down slope, more and more solid particles are transported to the front and the sides, resulting in solid-rich and mechanically strong frontal surge head, and lateral levees followed by a weaker tail largely consisting of viscous fluid. The primary frontal solid-rich surge head followed by secondary fluid-rich surges is the consequence of phase-separation. Such typical and dominant phase-separation phenomena are revealed for two-phase debris flow simulations. Finally, changes in flow composition, that are explicitly considered by the new modelling approach, result in significant changes of impact pressure estimates. These are highly important in hazard assessment and mitigation planning and highlight the application potential of the new approach.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
A mechanical erosion model for two-phase mass flows
Authors:
Shiva P. Pudasaini,
Jan-Thomas Fischer
Abstract:
Erosion, entrainment and deposition are complex and dominant, but yet poorly understood, mechanical processes in geophysical mass flows. Here, we propose a novel, process-based, two-phase, erosion-deposition model capable of adequately describing these complex phenomena commonly observed in landslides, avalanches, debris flows and bedload transport. The model is based on the jump in the momentum f…
▽ More
Erosion, entrainment and deposition are complex and dominant, but yet poorly understood, mechanical processes in geophysical mass flows. Here, we propose a novel, process-based, two-phase, erosion-deposition model capable of adequately describing these complex phenomena commonly observed in landslides, avalanches, debris flows and bedload transport. The model is based on the jump in the momentum flux including changes of material and flow properties along the flow-bed interface and enhances an existing general two-phase mass flow model (Pudasaini, 2012). A two-phase variably saturated erodible basal morphology is introduced and allows for the evolution of erosion-deposition-depths, incorporating the inherent physical process including momentum and rheological changes of the flowing mixture. By rigorous derivation, we show that appropriate incorporation of the mass and momentum productions or losses in conservative model formulation is essential for the physically correct and mathematically consistent description of erosion-entrainment-deposition processes. We show that mechanically deposition is the reversed process of erosion. We derive mechanically consistent closures for coefficients emerging in the erosion rate models. We prove that effectively reduced friction in erosion is equivalent to the momentum production. With this, we solve the long standing dilemma of mass mobility, and show that erosion enhances the mass flow mobility. The novel enhanced real two-phase model reveals some major aspects of the mechanics associated with erosion, entrainment and deposition. The model appropriately captures the emergence and propagation of complex frontal surge dynamics associated with the frontal ambient-drag with erosion.
△ Less
Submitted 6 October, 2016;
originally announced October 2016.
-
Real-Time Computation of Parameter Fitting and Image Reconstruction Using Graphical Processing Units
Authors:
Uldis Locans,
Andreas Adelmann,
Andreas Suter,
Jannis Fischer,
Werner Lustermann,
Gunther Dissertori,
Qiulin Wang
Abstract:
In recent years graphical processing units (GPUs) have become a powerful tool in scientific computing. Their potential to speed up highly parallel applications brings the power of high performance computing to a wider range of users. However, programming these devices and integrating their use in existing applications is still a challenging task.
In this paper we examined the potential of GPUs f…
▽ More
In recent years graphical processing units (GPUs) have become a powerful tool in scientific computing. Their potential to speed up highly parallel applications brings the power of high performance computing to a wider range of users. However, programming these devices and integrating their use in existing applications is still a challenging task.
In this paper we examined the potential of GPUs for two different applications. The first application, created at Paul Scherrer Institut (PSI), is used for parameter fitting during data analysis of muSR (muon spin rotation, relaxation and resonance) experiments. The second application, developed at ETH, is used for PET (Positron Emission Tomography) image reconstruction and analysis. Applications currently in use were examined to identify parts of the algorithms in need of optimization. Efficient GPU kernels were created in order to allow applications to use a GPU, to speed up the previously identified parts. Benchmarking tests were performed in order to measure the achieved speedup
During this work, we focused on single GPU systems to show that real time data analysis of these problems can be achieved without the need for large computing clusters. The results show that the currently used application for parameter fitting, which uses OpenMP to parallelize calculations over multiple CPU cores, can be accelerated around 40 times through the use of a GPU. The speedup may vary depending on the size and complexity of the problem. For PET image analysis, the obtained speedups of the GPU version was more than x40 larger compared to a single core CPU implementation. The achieved results show that it is possible to improve the execution time by orders of magnitude.
△ Less
Submitted 22 November, 2016; v1 submitted 8 April, 2016;
originally announced April 2016.
-
A Coherent Polariton Laser
Authors:
Seonghoon Kim,
Bo Zhang,
Zhaorong Wang,
Julian Fischer,
Sebastian Brodbeck,
Martin Kamp,
Christian Schneider,
Sven Höfling,
Hui Deng
Abstract:
The semiconductor polariton laser promises a new source of coherent light, which, compared to conventional semiconductor photon lasers, has input-energy threshold orders of magnitude lower. However, intensity stability, a defining feature of a coherent state, has remained poor. Intensity noise at many times of the shot-noise of a coherent state has persisted, which has been attributed to multiple…
▽ More
The semiconductor polariton laser promises a new source of coherent light, which, compared to conventional semiconductor photon lasers, has input-energy threshold orders of magnitude lower. However, intensity stability, a defining feature of a coherent state, has remained poor. Intensity noise at many times of the shot-noise of a coherent state has persisted, which has been attributed to multiple mechanisms that are difficult to separate in conventional polariton systems. The large intensity noise in turn limited the phase coherence. These limit the capability of the polariton laser as a source of coherence light. Here, we demonstrate a polariton laser with shot-noise limited intensity stability, as expected of a fully coherent state. This is achieved by using an optical cavity with high mode selectivity to enforce single-mode lasing, suppress condensate depletion, and establish gain saturation. The absence of spurious intensity fluctuations moreover enabled measurement of a transition from exponential to Gaussian decay of the phase coherence of the polariton laser. It suggests large self-interaction energies in the polariton condensate, exceeding the laser bandwidth. Such strong interactions are unique to matter-wave laser and important for nonlinear polariton devices. The results will guide future development of polariton lasers and nonlinear polariton devices.
△ Less
Submitted 1 February, 2016; v1 submitted 1 February, 2016;
originally announced February 2016.
-
ECFA Detector R&D Panel, Review Report
Authors:
The FCAL Collaboration,
H. Abramowicz,
A. Abusleme,
K. Afanaciev,
J. Aguilar,
E. Alvarez,
P. Bambade,
L. Bortko,
I. Bozovic-Jelisavcic,
E. Castro,
G. Chelkov,
C. Coca,
W. Daniluk,
A. Dragone,
L. Dumitru,
K. Elsener,
I. Emeliantchik,
E. Firu,
J. Fischer,
T. Fiutowski,
V. Ghenescu,
M. Gostkin,
G. Grzelak,
G. Haller,
H. Henschel
, et al. (46 additional authors not shown)
Abstract:
Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The in…
▽ More
Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC or CLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scattering events with a precision better than 10$^{-3}$ at the ILC and 10$^{-2}$ at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.
△ Less
Submitted 19 November, 2014; v1 submitted 18 November, 2014;
originally announced November 2014.
-
Focal-plane detector system for the KATRIN experiment
Authors:
J. F. Amsbaugh,
J. Barrett,
A. Beglarian,
T. Bergmann,
H. Bichsel,
L. I. Bodine,
J. Bonn,
N. M. Boyd,
T. H. Burritt,
Z. Chaoui,
S. Chilingaryan,
T. J. Corona,
P. J. Doe,
J. A. Dunmore,
S. Enomoto,
J. Fischer,
J. A. Formaggio,
F. M. Fränkle,
D. Furse,
H. Gemmeke,
F. Glück,
F. Harms,
G. C. Harper,
J. Hartmann,
M. A. Howe
, et al. (26 additional authors not shown)
Abstract:
The focal-plane detector system for the KArlsruhe TRItium Neutrino (KATRIN) experiment consists of a multi-pixel silicon p-i-n-diode array, custom readout electronics, two superconducting solenoid magnets, an ultra high-vacuum system, a high-vacuum system, calibration and monitoring devices, a scintillating veto, and a custom data-acquisition system. It is designed to detect the low-energy electro…
▽ More
The focal-plane detector system for the KArlsruhe TRItium Neutrino (KATRIN) experiment consists of a multi-pixel silicon p-i-n-diode array, custom readout electronics, two superconducting solenoid magnets, an ultra high-vacuum system, a high-vacuum system, calibration and monitoring devices, a scintillating veto, and a custom data-acquisition system. It is designed to detect the low-energy electrons selected by the KATRIN main spectrometer. We describe the system and summarize its performance after its final installation.
△ Less
Submitted 28 January, 2015; v1 submitted 10 April, 2014;
originally announced April 2014.
-
Three-dimensional quantum photonic elements based on single nitrogen vacancy-centres in laser-written microstructures
Authors:
Andreas W. Schell,
Johannes Kaschke,
Joachim Fischer,
Rico Henze,
Janik Wolters,
Martin Wegener,
Oliver Benson
Abstract:
A fully integrated quantum optical technology requires active quantum systems incorporated into resonant optical microstructures and inter-connected in three dimensions via photonic wires. Nitrogen vacancy-centres (NV-centres) in diamond which are excellent photostable room temperature single-photon emitters are ideal candidates for that purpose. Extensive research efforts to couple NV-centres to…
▽ More
A fully integrated quantum optical technology requires active quantum systems incorporated into resonant optical microstructures and inter-connected in three dimensions via photonic wires. Nitrogen vacancy-centres (NV-centres) in diamond which are excellent photostable room temperature single-photon emitters are ideal candidates for that purpose. Extensive research efforts to couple NV-centres to photonic structures such as optical microresonators, microcavities, and waveguides have been pursued. Strategies for integration range from top-down fabrication via etching of diamond membranes to sophisticated bottom-up assembly of hybrid structures using diamond nanocrystals where the latter approach allows for deterministic coupling. Recently, another approach based on the incorporation of nanodiamonds in soft glass optical fibres via a melting process has been introduced. Here, we utilize two-photon direct laser writing (DLW) to fabricate fully three-dimensional (3D) structures from a photoresist mixed with a solution of nanodiamonds containing NV-centres. For the first time, this approach facilitates building integrated 3D quantum photonic elements of nearly arbitrary shapes.
△ Less
Submitted 10 January, 2013; v1 submitted 10 September, 2012;
originally announced September 2012.
-
Fluctuations and differential contraction during regeneration of Hydra vulgaris tissue toroids
Authors:
Michael Krahe,
Iris Wenzel,
Kao-Nung Lin,
Julia Fischer,
Joseph Goldmann,
Markus Kästner,
Claus Fütterer
Abstract:
We studied regenerating bilayered tissue toroids dissected from Hydra vulgaris polyps and relate our macroscopic observations to the dynamics of force-generating mesoscopic cytoskeletal structures. Tissue fragments undergo a specific toroid-spheroid folding process leading to complete regeneration towards a new organism. The time scale of folding is too fast for biochemical signalling or morphogen…
▽ More
We studied regenerating bilayered tissue toroids dissected from Hydra vulgaris polyps and relate our macroscopic observations to the dynamics of force-generating mesoscopic cytoskeletal structures. Tissue fragments undergo a specific toroid-spheroid folding process leading to complete regeneration towards a new organism. The time scale of folding is too fast for biochemical signalling or morphogenetic gradients which forced us to assume purely mechanical self-organization. The initial pattern selection dynamics was studied by embedding toroids into hydro-gels allowing us to observe the deformation modes over longer periods of time. We found increasing mechanical fluctuations which break the toroidal symmetry and discuss the evolution of their power spectra for various gel stiffnesses. Our observations are related to single cell studies which explain the mechanical feasibility of the folding process. In addition, we observed switching of cells from a tissue bound to a migrating state after folding failure as well as in tissue injury.
We found a supra-cellular actin ring assembled along the toroid's inner edge. Its contraction can lead to the observed folding dynamics as we could confirm by finite element simulations. This actin ring in the inner cell layer is assembled by myosin- driven length fluctuations of supra-cellular α-actin structures (myonemes) in the outer cell-layer.
△ Less
Submitted 30 November, 2012; v1 submitted 4 July, 2012;
originally announced July 2012.
-
Optical phase cloaking of 700-nm light waves in the far field by a three-dimensional carpet cloak
Authors:
Tolga Ergin,
Joachim Fischer,
Martin Wegener
Abstract:
Transformation optics is a design tool that connects geometry of space and propagation of light. Invisibility cloaking is a corresponding benchmark example. Recent experiments at optical frequencies have demonstrated cloaking for the light amplitude ("ray cloaking"). In this Letter, we demonstrate far-field cloaking of the light phase ("wave cloaking") by interferometric microscope-imaging experim…
▽ More
Transformation optics is a design tool that connects geometry of space and propagation of light. Invisibility cloaking is a corresponding benchmark example. Recent experiments at optical frequencies have demonstrated cloaking for the light amplitude ("ray cloaking"). In this Letter, we demonstrate far-field cloaking of the light phase ("wave cloaking") by interferometric microscope-imaging experiments on the previously introduced three-dimensional carpet cloak at 700-nm wavelength and for arbitrary polarization of light.
△ Less
Submitted 21 July, 2011;
originally announced July 2011.
-
Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy
Authors:
Joachim Fischer,
Martin Wegener
Abstract:
Three-dimensional direct laser writing has become a well established, versatile, widespread, and even readily commercially available "workhorse" of nano- and micro-technology. However, its lateral and axial spatial resolution is inherently governed by Abbe's diffraction limitation - analogous to optical microscopy. In microscopy, stimulated-emission-depletion approaches have lately circumvented Ab…
▽ More
Three-dimensional direct laser writing has become a well established, versatile, widespread, and even readily commercially available "workhorse" of nano- and micro-technology. However, its lateral and axial spatial resolution is inherently governed by Abbe's diffraction limitation - analogous to optical microscopy. In microscopy, stimulated-emission-depletion approaches have lately circumvented Abbe's barrier and lateral resolutions down to 5.6 nm using visible light have been achieved. In this paper, after very briefly reviewing our previous efforts with respect to translating this success in optical microscopy to optical lithography, we present our latest results regarding resolution improvement in the lateral as well as in the much more relevant axial direction. The structures presented in this paper set a new resolution-benchmark for next-generation direct-laser-writing optical lithography. In particular, we break the lateral and the axial Abbe criterion for the first time.
△ Less
Submitted 28 May, 2011;
originally announced May 2011.
-
3D Polarization-Independent Visible Invisibility
Authors:
Joachim Fischer,
Tolga Ergin,
Martin Wegener
Abstract:
We fabricate and characterize a three-dimensional polarization-independent invisibility cloak operating at visible wavelengths of light. The required drastic miniaturization has become possible by employing stimulated-emission-depletion inspired direct-laser-writing optical lithography with conceptually diffraction-unlimited axial and lateral resolution.
We fabricate and characterize a three-dimensional polarization-independent invisibility cloak operating at visible wavelengths of light. The required drastic miniaturization has become possible by employing stimulated-emission-depletion inspired direct-laser-writing optical lithography with conceptually diffraction-unlimited axial and lateral resolution.
△ Less
Submitted 15 December, 2010;
originally announced December 2010.