-
Modelling provincial Covid-19 epidemic data in Italy using an adjusted time-dependent SIRD model
Authors:
Luisa Ferrari,
Giuseppe Gerardi,
Giancarlo Manzi,
Alessandra Micheletti,
Federica Nicolussi,
Elia Biganzoli,
Silvia Salini
Abstract:
In this paper we develop a predictive model for the spread of COVID-19 infection at a provincial (i.e. EU NUTS-3) level in Italy by using official data from the Italian Ministry of Health integrated with data extracted from daily official press conferences of regional authorities and from local newspaper websites. This integration is mainly concerned with COVID-19 cause specific death data which a…
▽ More
In this paper we develop a predictive model for the spread of COVID-19 infection at a provincial (i.e. EU NUTS-3) level in Italy by using official data from the Italian Ministry of Health integrated with data extracted from daily official press conferences of regional authorities and from local newspaper websites. This integration is mainly concerned with COVID-19 cause specific death data which are not available at NUTS-3 level from open official data data channels. An adjusted time-dependent SIRD model is used to predict the behavior of the epidemic, specifically the number of susceptible, infected, deceased and recovered people. Predictive model performance is evaluated using comparison with real data.
△ Less
Submitted 2 June, 2020; v1 submitted 25 May, 2020;
originally announced May 2020.
-
COVID-Pro in Italy: a dashboard for a province-based analysis
Authors:
Luisa Ferrari,
Giuseppe Gerardi,
Giancarlo Manzi,
Alessandra Micheletti,
Federica Nicolussi,
Silvia Salini
Abstract:
This paper presents an dashboard developed to analyse the outbreak of the Covid-19 infection in Italy considering daily NUTS-3 data on positive cases provided by the Italian Ministry of Health and on deaths derived from Italian regional authorities' official press conferences. Descriptive time series plots are provided together with a map describing the spatial distribution of province cumulative…
▽ More
This paper presents an dashboard developed to analyse the outbreak of the Covid-19 infection in Italy considering daily NUTS-3 data on positive cases provided by the Italian Ministry of Health and on deaths derived from Italian regional authorities' official press conferences. Descriptive time series plots are provided together with a map describing the spatial distribution of province cumulative cases and rates. A section on a proposed time-dependent adjusted SIRD model for NUTS-3 regions is also provided in the dashboard.
△ Less
Submitted 1 June, 2020; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Why pushing a bell does not produce a sound
Authors:
Loris Ferrari
Abstract:
The difference between "beating" and "pushing" results in the perception that a push just makes the object move as a whole, while a beat produces also a sound. Through a detailed analysis of the physics underlying such everyday experiences, we identify the \emph{strength}, the \emph{duration} and the \emph{softness} of the applied contact force, as the main (measurable) characteristics that mark s…
▽ More
The difference between "beating" and "pushing" results in the perception that a push just makes the object move as a whole, while a beat produces also a sound. Through a detailed analysis of the physics underlying such everyday experiences, we identify the \emph{strength}, the \emph{duration} and the \emph{softness} of the applied contact force, as the main (measurable) characteristics that mark such difference. The strength determines the final velocity $Δv$ achieved by the body. The duration $2τ$ compares to the time $τ_\ell$ the sound takes to cross the body. The softness $γ$ (a positive exponent) results from the shape in time of the contact force. Those three elements enter the formula for the intensity of the sound produced. The relevant role of the softness is stressed and specific values are calculated for a thin metallic bar, chosen as the simplest possible model system.
△ Less
Submitted 14 June, 2019;
originally announced June 2019.
-
Parametric Resonance in a dissipative system á la Kronig-Penney
Authors:
Loris Ferrari
Abstract:
The competition between parametric resonance (PR) and dissipation is studied in the damped Kronig-Penney model, with time-dependent dissipation rate gamma(t). In the classical case, it is shown that dissipation leaves just a finite number of PR-bands at most, suppressing those at higher frequencies. An analysis of the Lewis-Reisenfeld invariant I(q,p,rho) is performed, showing that, in the PR regi…
▽ More
The competition between parametric resonance (PR) and dissipation is studied in the damped Kronig-Penney model, with time-dependent dissipation rate gamma(t). In the classical case, it is shown that dissipation leaves just a finite number of PR-bands at most, suppressing those at higher frequencies. An analysis of the Lewis-Reisenfeld invariant I(q,p,rho) is performed, showing that, in the PR regime, the auxiliary function rho(t) can be chosen bounded or unbounded, depending on the initial conditions.
△ Less
Submitted 1 December, 2018;
originally announced December 2018.
-
Surface wave control for large arrays of microwave kinetic inductance detectors
Authors:
Stephen J. C. Yates,
Andrey M. Baryshev,
Ozan Yurduseven,
Juan Bueno,
Kristina K. Davis,
Lorenza Ferrari,
Willem Jellema,
Nuria Llombart,
Vignesh Murugesan,
David J. Thoen,
Jochem J. A. Baselmans
Abstract:
Large ultra-sensitive detector arrays are needed for present and future observatories for far infra-red, submillimeter wave (THz), and millimeter wave astronomy. With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves, the surface wave. We demonstrate this effect with focal plane arrays of 880 lens-antenna coupled Microwave Kinetic I…
▽ More
Large ultra-sensitive detector arrays are needed for present and future observatories for far infra-red, submillimeter wave (THz), and millimeter wave astronomy. With increasing array size, it is increasingly important to control stray radiation inside the detector chips themselves, the surface wave. We demonstrate this effect with focal plane arrays of 880 lens-antenna coupled Microwave Kinetic Inductance Detectors (MKIDs). Presented here are near field measurements of the MKID optical response versus the position on the array of a reimaged optical source. We demonstrate that the optical response of a detector in these arrays saturates off-pixel at the $\sim-30$ dB level compared to the peak pixel response. The result is that the power detected from a point source at the pixel position is almost identical to the stray response integrated over the chip area. With such a contribution, it would be impossible to measure extended sources, while the point source sensitivity is degraded due to an increase of the stray loading. However, we show that by incorporating an on-chip stray light absorber, the surface wave contribution is reduced by a factor $>$10. With the on-chip stray light absorber the point source response is close to simulations down to the $\sim-35$ dB level, the simulation based on an ideal Gaussian illumination of the optics. In addition, as a crosscheck we show that the extended source response of a single pixel in the array with the absorbing grid is in agreement with the integral of the point source measurements.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Performance of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors as Direct Detectors for Sub-millimeter Astronomy
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid mi…
▽ More
In the next decades millimeter and sub-mm astronomy requires large format imaging arrays and broad-band spectrometers to complement the high spatial and spectral resolution of the Atacama Large Millimeter/sub-millimeter Array. The desired sensors for these instruments should have a background limited sensitivity and a high optical efficiency and enable arrays thousands of pixels in size. Hybrid microwave kinetic inductance detectors consisting of NbTiN and Al have shown to satisfy these requirements. We present the second generation hybrid NbTiN-Al MKIDs, which are photon noise limited in both phase and amplitude readout for loading levels $P_{850GHz} \geq 10$ fW. Thanks to the increased responsivity, the photon noise level achieved in phase allows us to simultaneously read out approximately 8000 pixels using state-of-the-art electronics. In addition, the choice of superconducting materials and the use of a Si lens in combination with a planar antenna gives these resonators the flexibility to operate within the frequency range $0.09 < ν< 1.1$ THz. Given these specifications, hybrid NbTiN-Al MKIDs will enable astronomically usable kilopixel arrays for sub-mm imaging and moderate resolution spectroscopy.
△ Less
Submitted 14 August, 2014;
originally announced August 2014.
-
High optical efficiency and photon noise limited sensitivity of microwave kinetic inductance detectors using phase readout
Authors:
R. M. J. Janssen,
J. J. A. Baselmans,
A. Endo,
L. Ferrari,
S. J. C. Yates,
A. M. Baryshev,
T. M. Klapwijk
Abstract:
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a sing…
▽ More
We demonstrate photon noise limited performance in both phase and amplitude readout in microwave kinetic inductance detectors (MKIDs) consisting of NbTiN and Al, down to 100 fW of optical power. We simulate the far field beam pattern of the lens-antenna system used to couple radiation into the MKID and derive an aperture efficiency of 75%. This is close to the theoretical maximum of 80% for a single-moded detector. The beam patterns are verified by a detailed analysis of the optical coupling within our measurement setup.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
A dual-band millimeter-wave kinetic inductance camera for the IRAM 30-meter telescope
Authors:
A. Monfardini,
A. Benoit,
A. Bideaud,
L. J. Swenson,
M. Roesch,
F. X. Desert,
S. Doyle,
A. Endo,
A. Cruciani,
P. Ade,
A. M. Baryshev,
J. J. A. Baselmans,
O. Bourrion,
M. Calvo,
P. Camus,
L. Ferrari,
C. Giordano,
C. Hoffmann,
S. Leclercq,
J. F. Macias-Perez,
P. Mauskopf,
K. F. Schuster,
C. Tucker,
C. Vescovi,
S. J. C. Yates
Abstract:
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imagin…
▽ More
Context. The Neel IRAM KIDs Array (NIKA) is a fully-integrated measurement system based on kinetic inductance detectors (KIDs) currently being developed for millimeter wave astronomy. In a first technical run, NIKA was successfully tested in 2009 at the Institute for Millimetric Radio Astronomy (IRAM) 30-meter telescope at Pico Veleta, Spain. This prototype consisted of a 27-42 pixel camera imaging at 150 GHz. Subsequently, an improved system has been developed and tested in October 2010 at the Pico Veleta telescope. The instrument upgrades included dual-band optics allowing simultaneous imaging at 150 GHz and 220 GHz, faster sampling electronics enabling synchronous measurement of up to 112 pixels per measurement band, improved single-pixel sensitivity, and the fabrication of a sky simulator to replicate conditions present at the telescope. Results. The new dual-band NIKA was successfully tested in October 2010, performing in-line with sky simulator predictions. Initially the sources targeted during the 2009 run were re-imaged, verifying the improved system performance. An optical NEP was then calculated to be around 2 \dot 10-16 W/Hz1/2. This improvement in comparison with the 2009 run verifies that NIKA is approaching the target sensitivity for photon-noise limited ground-based detectors. Taking advantage of the larger arrays and increased sensitivity, a number of scientifically-relevant faint and extended objects were then imaged including the Galactic Center SgrB2(FIR1), the radio galaxy Cygnus A and the NGC1068 Seyfert galaxy. These targets were all observed simultaneously in the 150 GHz and 220 GHz atmospheric windows.
△ Less
Submitted 8 February, 2011; v1 submitted 4 February, 2011;
originally announced February 2011.
-
Information Loss in Coarse Graining of Polymer Configurations via Contact Matrices
Authors:
Patrik L. Ferrari,
Joel L. Lebowitz
Abstract:
Contact matrices provide a coarse grained description of the configuration omega of a linear chain (polymer or random walk) on Z^n: C_{ij}(omega)=1 when the distance between the position of the i-th and j-th step are less than or equal to some distance "a" and C_{ij}(omega)=0 otherwise. We consider models in which polymers of length N have weights corresponding to simple and self-avoiding random…
▽ More
Contact matrices provide a coarse grained description of the configuration omega of a linear chain (polymer or random walk) on Z^n: C_{ij}(omega)=1 when the distance between the position of the i-th and j-th step are less than or equal to some distance "a" and C_{ij}(omega)=0 otherwise. We consider models in which polymers of length N have weights corresponding to simple and self-avoiding random walks, SRW and SAW, with "a" the minimal permissible distance. We prove that to leading order in N, the number of matrices equals the number of walks for SRW, but not for SAW. The coarse grained Shannon entropies for SRW agree with the fine grained ones for n <= 2, but differs for n >= 3.
△ Less
Submitted 12 April, 2003; v1 submitted 11 December, 2002;
originally announced December 2002.
