-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Vortices of Electro-osmotic Flow in Heterogeneous Porous Media
Authors:
Mohammad Mirzadeh,
Tingtao Zhou,
Mohammad Amin Amooie,
Dimitrios Fraggedakis,
Todd R. Ferguson,
Martin Z. Bazant
Abstract:
Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential)…
▽ More
Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential) in the limit of thin double layers. Here, we show that the inherent heterogeneity of porous media generally leads to macroscopic vortex patterns, which have important implications for convective transport and mixing. These vortical flows originate due to competition between pressure-driven and electro-osmotic flows, and their size are characterized by the correlation length of heterogeneity in permeability or surface charge. The appearance of vortices is controlled by a single dimensionless control parameter, defined as the ratio of a typical electro-osmotic velocity to the total mean velocity.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Broadband, millimeter-wave antireflection coatings for large-format, cryogenic aluminum oxide optics
Authors:
A. Nadolski,
J. D. Vieira,
J. A. Sobrin,
A. M. Kofman,
P. A. R. Ade,
Z. Ahmed,
A. J. Anderson,
J. S. Avva,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
J. R. Cheshire IV,
G. E. Chesmore,
J. F. Cliche,
A. Cukierman,
T. de Haan,
M. Dierickx,
J. Ding,
D. Dutcher,
W. Everett
, et al. (64 additional authors not shown)
Abstract:
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of com…
▽ More
We present two prescriptions for broadband (~77 - 252 GHz), millimeter-wave antireflection coatings for cryogenic, sintered polycrystalline aluminum oxide optics: one for large-format (700 mm diameter) planar and plano-convex elements, the other for densely packed arrays of quasi-optical elements, in our case 5 mm diameter half-spheres (called "lenslets"). The coatings comprise three layers of commercially-available, polytetrafluoroethylene-based, dielectric sheet material. The lenslet coating is molded to fit the 150 mm diameter arrays directly while the large-diameter lenses are coated using a tiled approach. We review the fabrication processes for both prescriptions then discuss laboratory measurements of their transmittance and reflectance. In addition, we present the inferred refractive indices and loss tangents for the coating materials and the aluminum oxide substrate. We find that at 150 GHz and 300 K the large-format coating sample achieves (97 +/- 2)% transmittance and the lenslet coating sample achieves (94 +/- 3)% transmittance.
△ Less
Submitted 2 March, 2020; v1 submitted 6 December, 2019;
originally announced December 2019.
-
Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G
Authors:
A. J. Anderson,
P. A. R. Ade,
Z. Ahmed,
J. S. Avva,
P. S. Barry,
R. Basu Thakur,
A. N. Bender,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the…
▽ More
SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
On-sky performance of the SPT-3G frequency-domain multiplexed readout
Authors:
A. N. Bender,
A. J. Anderson,
J. S. Avva,
P. A. R. Ade,
Z. Ahmed,
P. S. Barry,
R. Basu Thakur,
B. A. Benson,
L. Bryant,
K. Byrum,
J. E. Carlstrom,
F. W. Carter,
T. W. Cecil,
C. L. Chang,
H. -M. Cho,
J. F. Cliche,
A. Cukierman,
T. de Haan,
E. V. Denison,
J. Ding,
M. A. Dobbs,
D. Dutcher,
W. Everett,
K. R. Ferguson,
A. Foster
, et al. (64 additional authors not shown)
Abstract:
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current…
▽ More
Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime.
△ Less
Submitted 25 July, 2019;
originally announced July 2019.
-
Echo-Based Quantum Memory
Authors:
G. T. Campbell,
K. R. Ferguson,
M. J. Sellars,
B. C. Buchler,
P. K. Lam
Abstract:
In this book chapter we review photon echo based schemes for optical quantum memory. We outline the basic principles of the Atomic Frequency Comb (AFC), Gradient Echo Memory (GEM) and Rephased Amplified Spontaneous Emission (RASE) protocols. We describe the properties of the rare-earth ion and gaseous vapours ensembles that have been used to carry out experimental demonstrations. These experiments…
▽ More
In this book chapter we review photon echo based schemes for optical quantum memory. We outline the basic principles of the Atomic Frequency Comb (AFC), Gradient Echo Memory (GEM) and Rephased Amplified Spontaneous Emission (RASE) protocols. We describe the properties of the rare-earth ion and gaseous vapours ensembles that have been used to carry out experimental demonstrations. These experiments are then discussed with reference to relevant classical and quantum performance criteria.
△ Less
Submitted 12 February, 2019;
originally announced February 2019.
-
Ultrafast x-ray-induced nuclear dynamics in diatomic molecules using femtosecond x-ray/x-ray pump-probe spectroscopy
Authors:
C. S. Lehmann,
A. Picón,
C. Bostedt,
A. Rudenko,
A. Marinelli,
D. Moonshiram,
T. Osipov,
D. Rolles,
N. Berrah,
C. Bomme,
M. Bucher,
G. Doumy,
B. Erk,
K. R. Ferguson,
T. Gorkhover,
P. J. Ho,
E. P. Kanter,
B. Krassig,
J. Krzywinski,
A. A. Lutman,
A. M. March,
D. Ray,
L. Young,
S. T. Pratt,
S. H. Southworth
Abstract:
The capability of generating two intense, femtosecond x-ray pulses with controlled time delay opens the possibility of performing time-resolved experiments for x-ray induced phenomena. We have applied this capability to study the photoinduced dynamics in diatomic molecules. In molecules composed of low-Z elements, \textit{K}-shell ionization creates a core-hole state in which the main decay mode i…
▽ More
The capability of generating two intense, femtosecond x-ray pulses with controlled time delay opens the possibility of performing time-resolved experiments for x-ray induced phenomena. We have applied this capability to study the photoinduced dynamics in diatomic molecules. In molecules composed of low-Z elements, \textit{K}-shell ionization creates a core-hole state in which the main decay mode is an Auger process involving two electrons in the valence shell. After Auger decay, the nuclear wavepackets of the transient two-valence-hole states continue evolving on the femtosecond timescale, leading either to separated atomic ions or long-lived quasi-bound states. By using an x-ray pump and an x-ray probe pulse tuned above the \textit{K}-shell ionization threshold of the nitrogen molecule, we are able to observe ion dissociation in progress by measuring the time-dependent kinetic energy releases of different breakup channels. We simulated the measurements on N$_2$ with a molecular dynamics model that accounts for \textit{K}-shell ionization, Auger decay, and the time evolution of the nuclear wavepackets. In addition to explaining the time-dependent feature in the measured kinetic energy release distributions from the dissociative states, the simulation also reveals the contributions of quasi-bound states.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Phase Transformation Dynamics in Porous Battery Electrodes
Authors:
Todd R. Ferguson,
Martin Z. Bazant
Abstract:
Porous electrodes composed of multiphase active materials are widely used in Li-ion batteries, but their dynamics are poorly understood. Two-phase models are largely empirical, and no models exist for three or more phases. Using a modified porous electrode theory based on non-equilibrium thermodynamics, we show that experimental phase behavior can be accurately predicted from free energy models, w…
▽ More
Porous electrodes composed of multiphase active materials are widely used in Li-ion batteries, but their dynamics are poorly understood. Two-phase models are largely empirical, and no models exist for three or more phases. Using a modified porous electrode theory based on non-equilibrium thermodynamics, we show that experimental phase behavior can be accurately predicted from free energy models, without artificially placing phase boundaries or fitting the open circuit voltage. First, we simulate lithium intercalation in porous iron phosphate, a popular two-phase cathode, and show that the zero-current voltage gap, slo** voltage plateau and under-estimated exchange currents all result from size-dependent nucleation and mosaic instability. Next, we simulate porous graphite, the standard anode with three stable phases, and reproduce experimentally observed fronts of color-changing phase transformations. These results provide a framework for physics-based design and control for electrochemical systems with complex thermodynamics.
△ Less
Submitted 5 February, 2014; v1 submitted 27 January, 2014;
originally announced January 2014.
-
Particle-Level Modeling of the Charge-Discharge Behavior of Nanoparticulate Phase-Separating Li-Ion Battery Electrodes
Authors:
Bernardo Orvananos,
Todd R. Ferguson,
Hui-Chia Yu,
Martin Z. Bazant,
Katsuyo Thornton
Abstract:
In nanoparticulate phase-separating electrodes, phase separation inside the particles can be hindered during their charge/discharge cycles even when a thermodynamic driving force for phase separation exists. In such cases, particles may (de)lithiate discretely in a process referred to as mosaic instability. This instability could be the key to elucidating the complex charge/discharge dynamics in n…
▽ More
In nanoparticulate phase-separating electrodes, phase separation inside the particles can be hindered during their charge/discharge cycles even when a thermodynamic driving force for phase separation exists. In such cases, particles may (de)lithiate discretely in a process referred to as mosaic instability. This instability could be the key to elucidating the complex charge/discharge dynamics in nanoparticulate phase-separating electrodes. In this paper, the dynamics of the mosaic instability is studied using Smoothed Boundary Method simulations at the particle level, where the concentration and electrostatic potential fields are spatially resolved around individual particles. Two sets of configurations consisting of spherical particles with an identical radius are employed to study the instability in detail. The effect of an activity-dependent exchange current density on the mosaic instability, which leads to asymmetric charge/discharge, is also studied. While we show that our model reproduces the results of a porous-electrode model for the simple setup studied here, it is a powerful framework with the capability to predict the detailed dynamics in three-dimensional complex electrodes and provides further insights into the complex dynamics that result from the coupling of electrochemistry, thermodynamics, and transport kinetics.
△ Less
Submitted 25 September, 2013;
originally announced September 2013.
-
Nonequilibrium Thermodynamics of Porous Electrodes
Authors:
Todd R. Ferguson,
Martin Z. Bazant
Abstract:
We reformulate and extend porous electrode theory for non-ideal active materials, including those capable of phase transformations. Using principles of non-equilibrium thermodynamics, we relate the cell voltage, ionic fluxes, and Faradaic charge-transfer kinetics to the variational electrochemical potentials of ions and electrons. The Butler-Volmer exchange current is consistently expressed in ter…
▽ More
We reformulate and extend porous electrode theory for non-ideal active materials, including those capable of phase transformations. Using principles of non-equilibrium thermodynamics, we relate the cell voltage, ionic fluxes, and Faradaic charge-transfer kinetics to the variational electrochemical potentials of ions and electrons. The Butler-Volmer exchange current is consistently expressed in terms of the activities of the reduced, oxidized and transition states, and the activation overpotential is defined relative to the local Nernst potential. We also apply mathematical bounds on effective diffusivity to estimate porosity and tortuosity corrections. The theory is illustrated for a Li-ion battery with active solid particles described by a Cahn-Hilliard phase-field model. Depending on the applied current and porous electrode properties, the dynamics can be limited by electrolyte transport, solid diffusion and phase separation, or intercalation kinetics. In phase-separating porous electrodes, the model predicts narrow reaction fronts, mosaic instabilities and voltage fluctuations at low current, consistent with recent experiments, which could not be described by existing porous electrode models.
△ Less
Submitted 23 August, 2012; v1 submitted 13 April, 2012;
originally announced April 2012.