-
The Lawnmower: an autonomous, protein-based artificial molecular motor
Authors:
Chapin S. Korosec,
Ivan Unksov,
Pradheebha Surendiran,
Roman Lyttleton,
Paul M. G. Curmi,
Christopher N. Angstmann,
Ralf Eichhorn,
Heiner Linke,
Nancy R. Forde
Abstract:
Inspired by biology, great progress has been made in creating artificial molecular motors. However, the dream of harnessing proteins - the building blocks selected by Nature - to design autonomous motors has so far remained elusive. Here we report the synthesis and characterization of the Lawnmower, an autonomous, protein-based artificial molecular motor comprised of a spherical hub decorated with…
▽ More
Inspired by biology, great progress has been made in creating artificial molecular motors. However, the dream of harnessing proteins - the building blocks selected by Nature - to design autonomous motors has so far remained elusive. Here we report the synthesis and characterization of the Lawnmower, an autonomous, protein-based artificial molecular motor comprised of a spherical hub decorated with proteases. Its "burnt-bridge" motion is directed by cleavage of a peptide lawn, promoting motion towards unvisited substrate. We find that Lawnmowers exhibit directional motion with average speeds of up to 80 nm/s, comparable to biological motors. By selectively patterning the peptide lawn on microfabricated tracks, we furthermore show that the Lawnmower is capable of track-guided motion. Our work opens an avenue towards nanotechnology applications of artificial protein motors.
△ Less
Submitted 11 August, 2023; v1 submitted 21 September, 2021;
originally announced September 2021.
-
Hyperpolarized solution-state NMR spectroscopy with optically polarized crystals
Authors:
Tim R. Eichhorn,
Anna J. Parker,
Felix Josten,
Christoph Müller,
Jochen Scheuer,
Jakob M. Steiner,
Martin Gierse,
Jonas Handwerker,
Michael Keim,
Sebastian Lucas,
Mohammad Usman Qureshi,
Alastair Marshall,
Alon Salhov,
Yifan Quan,
Jan Binder,
Kay Jahnke,
Philipp Neumann,
Stephan Knecht,
John W. Blanchard,
Martin B. Plenio,
Fedor Jelezko,
Lyndon Emsley,
Christophoros C. Vassiliou,
Patrick Hautle,
Ilai Schwartz
Abstract:
Nuclear spin hyperpolarization provides a promising route to overcome the challenges imposed by the limited sensitivity of nuclear magnetic resonance. Here we demonstrate that dissolution of spin-polarized pentacene-doped naphthalene crystals enables transfer of polarization to target molecules via intermolecular cross relaxation at room temperature and moderate magnetic fields (1.45$\,$T). This m…
▽ More
Nuclear spin hyperpolarization provides a promising route to overcome the challenges imposed by the limited sensitivity of nuclear magnetic resonance. Here we demonstrate that dissolution of spin-polarized pentacene-doped naphthalene crystals enables transfer of polarization to target molecules via intermolecular cross relaxation at room temperature and moderate magnetic fields (1.45$\,$T). This makes it possible to exploit the high spin polarization of optically polarized crystals while mitigating the challenges of its transfer to external nuclei, particularly of the large distances and prohibitively weak coupling between source and target nuclei across solid-solid or solid-liquid interfaces. With this method, here we inject the highly polarized mixture into a benchtop NMR spectrometer and observe the polarization dynamics for target $^1$H nuclei. Although the spectra are radiation damped due to the high naphthalene magnetization, we describe a procedure to process the data in order to obtain more conventional NMR spectra, and extract the target nuclei polarization. With the entire process occurring on a timescale of one minute, we observe NMR signals enhanced by factors between -200 and -1730 at 1.45$\,$T for a range of small molecules.
△ Less
Submitted 17 August, 2021; v1 submitted 13 August, 2021;
originally announced August 2021.
-
CBETA Design Report, Cornell-BNL ERL Test Accelerator
Authors:
G. H. Hoffstaetter,
D. Trbojevic,
C. Mayes,
N. Banerjee,
J. Barley,
I. Bazarov,
A. Bartnik,
J. S. Berg,
S. Brooks,
D. Burke,
J. Crittenden,
L. Cultrera,
J. Dobbins,
D. Douglas,
B. Dunham,
R. Eichhorn,
S. Full,
F. Furuta,
C. Franck,
R. Gallagher,
M. Ge,
C. Gulliford,
B. Heltsley,
D. Jusic,
R. Kaplan
, et al. (29 additional authors not shown)
Abstract:
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec…
▽ More
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science.
△ Less
Submitted 13 June, 2017;
originally announced June 2017.
-
Thermocurrents and their Role in high Q Cavity Performance
Authors:
R. Eichhorn,
C. Daly,
F. Furuta,
A. Ganshyn,
D. Gonnella,
D. Hall,
V. Ho,
G. H. Hoffstaetter,
M. Liepe,
J. May-Mann,
T. O'Connell,
S. Posen,
P. Quigley,
J. Sears,
V. Veshcherevich
Abstract:
Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there w…
▽ More
Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the way the cavity is cooled down. Moreover, different data sets exists, some of them indicate that a slow cool-down through the critical temperature is favourable while other data states the exact opposite. Even so there where speculations and some models about the role of thermo-currents and flux-pinning, the difference in behaviour remained a mystery. In this paper we will for the first time present a consistent theoretical model which we confirmed by data that describes the role of thermo-currents, driven by temperature gradients and material transitions. We will clearly show how they impact the quality factor of a cavity, discuss our findings, relate it to findings at other labs and develop mitigation strategies which especially addresses the issue of achieving high quality factors of so-called nitrogen doped cavities in horizontal test.
△ Less
Submitted 12 January, 2015; v1 submitted 19 November, 2014;
originally announced November 2014.
-
Nitrogen-Doped 9-Cell Cavity Performance in a Test Cryomodule for LCLS-II
Authors:
Dan Gonnella,
Ralf Eichhorn,
Fumio Furuta,
Mingqi Ge,
Daniel Hall,
Vivian Ho,
Georg Hoffstaetter,
Matthias Liepe,
Tim O'Connell,
Sam Posen,
Peter Quigley,
James Sears,
Vadim Veshcherevich,
Anna Grassellino,
Alexander Romanenko,
Dmitri Sergatskov
Abstract:
The superconducting RF linac for LCLS-II calls for 1.3 GHz 9-cell cavities with an average intrinsic quality factor Q0 of 2.7x10^10 at 2 K and 16 MV/m accelerating gradient. Two niobium 9-cell cavities, prepared with nitrogen-do** at Fermilab, were assembled into the Cornell Horizontal Test Cryomodule (HTC) to test cavity performance in a cryomodule that is very similar to a full LCLS-II cryomod…
▽ More
The superconducting RF linac for LCLS-II calls for 1.3 GHz 9-cell cavities with an average intrinsic quality factor Q0 of 2.7x10^10 at 2 K and 16 MV/m accelerating gradient. Two niobium 9-cell cavities, prepared with nitrogen-do** at Fermilab, were assembled into the Cornell Horizontal Test Cryomodule (HTC) to test cavity performance in a cryomodule that is very similar to a full LCLS-II cryomodule. The cavities met LCLS-II specifications with an average quench field of 17 MV/m and an average Q0 of 3x10^10. The sensitivity of the cavities' residual resistance to ambient magnetic field was determined to be 0.5 nOhm/mG during fast cool down. In two cool downs, a heater attached to one of the cavity beam tubes was used to induce large horizontal temperature gradients. Here we report on the results of these first tests of nitrogen-doped cavities in cryomodule, which provide critical information for the LCLS-II project.
△ Less
Submitted 13 November, 2014; v1 submitted 6 November, 2014;
originally announced November 2014.
-
Reply to Comment on "Circular Motion of Asymmetric Self-Propelling Particles"
Authors:
Felix Kümmel,
Borge ten Hagen,
Raphael Wittkowski,
Daisuke Takagi,
Ivo Buttinoni,
Ralf Eichhorn,
Giovanni Volpe,
Hartmut Löwen,
Clemens Bechinger
Abstract:
In a Comment [Phys. Rev. Lett. 113, 029801 (2014)] on our Letter on self-propelled asymmetric particles [Phys. Rev. Lett. 110, 198302 (2013); arXiv:1302.5787], Felderhof claims that our theory based on Langevin equations would be conceptually wrong. In this Reply we show that our theory is appropriate, consistent, and physically justified.
In a Comment [Phys. Rev. Lett. 113, 029801 (2014)] on our Letter on self-propelled asymmetric particles [Phys. Rev. Lett. 110, 198302 (2013); arXiv:1302.5787], Felderhof claims that our theory based on Langevin equations would be conceptually wrong. In this Reply we show that our theory is appropriate, consistent, and physically justified.
△ Less
Submitted 15 July, 2014;
originally announced July 2014.
-
On superconducting niobium accelerating cavities fired under N2-gas exposure
Authors:
Ralf Eichhorn,
Daniel Gonnella,
Georg Hoffstaetter,
Matthias Liepe,
Wolfgang Weingarten
Abstract:
The dependence of the Q-value on the RF field (Q-slope) is actively studied in various accelerator laboratories. Although remedies against this dependence have been found, the physical cause still remains obscure. A rather straightforward two-fluid model description of the Q-slope in the low and high field domains is presented with emphasis on the recently experimentally identified improvement of…
▽ More
The dependence of the Q-value on the RF field (Q-slope) is actively studied in various accelerator laboratories. Although remedies against this dependence have been found, the physical cause still remains obscure. A rather straightforward two-fluid model description of the Q-slope in the low and high field domains is presented with emphasis on the recently experimentally identified improvement of the Q-value by so-called "N-do**".
△ Less
Submitted 28 May, 2015; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Circular motion of asymmetric self-propelling particles
Authors:
Felix Kümmel,
Borge ten Hagen,
Raphael Wittkowski,
Ivo Buttinoni,
Ralf Eichhorn,
Giovanni Volpe,
Hartmut Löwen,
Clemens Bechinger
Abstract:
Micron-sized self-propelled (active) particles can be considered as model systems for characterizing more complex biological organisms like swimming bacteria or motile cells. We produce asymmetric microswimmers by soft lithography and study their circular motion on a substrate and near channel boundaries. Our experimental observations are in full agreement with a theory of Brownian dynamics for as…
▽ More
Micron-sized self-propelled (active) particles can be considered as model systems for characterizing more complex biological organisms like swimming bacteria or motile cells. We produce asymmetric microswimmers by soft lithography and study their circular motion on a substrate and near channel boundaries. Our experimental observations are in full agreement with a theory of Brownian dynamics for asymmetric self-propelled particles, which couples their translational and orientational motion.
△ Less
Submitted 15 April, 2013; v1 submitted 23 February, 2013;
originally announced February 2013.
-
Brownian dynamics simulations with hard-body interactions: Spherical particles
Authors:
Hans Behringer,
Ralf Eichhorn
Abstract:
A novel approach to account for hard-body interactions in (overdamped) Brownian dynamics simulations is proposed for systems with non-vanishing force fields. The scheme exploits the analytically known transition probability for a Brownian particle on a one-dimensional half-line. The motion of a Brownian particle is decomposed into a component that is affected by hard-body interactions and into com…
▽ More
A novel approach to account for hard-body interactions in (overdamped) Brownian dynamics simulations is proposed for systems with non-vanishing force fields. The scheme exploits the analytically known transition probability for a Brownian particle on a one-dimensional half-line. The motion of a Brownian particle is decomposed into a component that is affected by hard-body interactions and into components that are unaffected. The hard-body interactions are incorporated by replacing the affected component of motion by the evolution on a half-line. It is discussed under which circumstances this approach is justified. In particular, the algorithm is developed and formulated for systems with space-fixed obstacles and for systems comprising spherical particles. The validity and justification of the algorithm is investigated numerically by looking at exemplary model systems of soft matter, namely at colloids in flow fields and at protein interactions. Furthermore, a thorough discussion of properties of other heuristic algorithms is carried out.
△ Less
Submitted 6 November, 2012;
originally announced November 2012.
-
Separation of chiral particles in micro- or nanofluidic channels
Authors:
Sebastian Meinhardt,
Jens Smiatek,
Ralf Eichhorn,
Friederike Schmid
Abstract:
We propose a method to separate enantiomers in microfluidic or nanofluidic channels. It requires flow profiles which break chiral symmetry and have regions with high local shear. Such profiles can be generated in channels confined by walls with different hydrodynamic boundary conditions (e.g. slip lengths). Due to a nonlinear hydrodynamic effect, particles with different chirality migrate at diffe…
▽ More
We propose a method to separate enantiomers in microfluidic or nanofluidic channels. It requires flow profiles which break chiral symmetry and have regions with high local shear. Such profiles can be generated in channels confined by walls with different hydrodynamic boundary conditions (e.g. slip lengths). Due to a nonlinear hydrodynamic effect, particles with different chirality migrate at different speed and can be separated. The mechanism is demonstrated by computer simulations. We investigate the influence of thermal fluctuations (i.e. the Péclet number) and show that the effect disappears in the linear response regime. The details of the microscopic flow are important and determine which volume forces are necessary to achieve separation.
△ Less
Submitted 18 April, 2012;
originally announced April 2012.
-
Superconducting H-mode Structures for Medium Energy Beams
Authors:
R. Eichhorn,
U. Ratzinger
Abstract:
Room temperature IH-type drift tube structures are used at different places now for the acceleration of ions with mass over charge ratios up to 65 and velocities between 0.016 c and 0.1 c. These structures have a high shunt impedance and allow the acceleration of very intense beams at high accelerating gradients. The overall power consumption of room temperature IH-mode structures is comparable…
▽ More
Room temperature IH-type drift tube structures are used at different places now for the acceleration of ions with mass over charge ratios up to 65 and velocities between 0.016 c and 0.1 c. These structures have a high shunt impedance and allow the acceleration of very intense beams at high accelerating gradients. The overall power consumption of room temperature IH-mode structures is comparable with superconducting (sc) structures up to 2 MeV/u. With the KONUS [1] beam dynamics, the required transversal focusing elements, e.g. quadrupole triplets can be placed outside of multicell cavities, which is favourable for building sc H-mode cavities. The design principles and consequences to the geometry compared to room temperature (rt) cavities will be described. The results gained from numerical simulations show that a sc multi-gap H21(0)-mode cavity (CH-type) can be an alternative to the sc spoke-type or reentrant cavity structures up to beam energies around 150 MeV/u. The main cavity parameters and possible fabrication options will be discussed.
[1] U. Ratzinger, Nucl. Intr. Meth., A 415 (1998) 229.
△ Less
Submitted 15 August, 2000;
originally announced August 2000.
