Showing 1–37 of 37 results for author: Edberg, T

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Effects of oxygen on the optical properties of phenyl-based scintillators during irradiation and recovery

Authors: C. Papageorgakis, M. Y. Aamir, A. Belloni, T. K. Edberg, S. C. Eno, B. Kronheim, C. Palmer

Abstract: Plastic scintillators are a versatile and inexpensive option for particle detection, which is why the largest particle physics experiments, CMS and ATLAS, use them extensively in their calorimeters. One of their challenging aspects, however, is their relatively low radiation hardness, which might be inadequate for very high luminosity future projects like the FCC-hh. In this study, results on the… ▽ More Plastic scintillators are a versatile and inexpensive option for particle detection, which is why the largest particle physics experiments, CMS and ATLAS, use them extensively in their calorimeters. One of their challenging aspects, however, is their relatively low radiation hardness, which might be inadequate for very high luminosity future projects like the FCC-hh. In this study, results on the effects of ionizing radiation on the optical properties of plastic scintillator samples are presented. The samples are made from two different matrix materials, polystyrene and polyvinyltoluene, and have been irradiated at dose rates ranging from $2.2\,$Gy/h up to $3.4\,$kGy/h at room temperature. An internal boundary that separates two regions of different indices of refraction is visible in the samples depending on the dose rate, and it is compatible with the expected oxygen penetration depth during irradiation. The dose rate dependence of the oxygen penetration depth for the two matrix materials suggests that the oxygen penetration coefficient differs for PS and PVT. The values of the refractive index for the internal regions are elevated compared to those of the outer regions, which are compatible with the indices of unirradiated samples. △ Less

Submitted 8 December, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Comments: Replaced with published version. Added journal DOI. 30 pages, 15 figures. Published in Nuclear Instruments and Methods in Physics Research Section A

Journal ref: Nucl. Instrum. Methods Phys. Res. A 1059 (2024) 168977

Reduction of light output of plastic scintillator tiles during irradiation at cold temperatures and in low-oxygen environments

Authors: B. Kronheim, A. Belloni, T. K. Edberg, S. C. Eno, C. Howe, C. Palmer, C. Papageorgakis, M. Paranjpe, S. Sriram

Abstract: The advent of the silicon photomultiplier has allowed the development of highly segmented calorimeters using plastic scintillator as the active media, with photodetectors embedded in the calorimeter, in dimples in the plastic. To reduce the photodetector's dark current and radiation damage, the high granularity calorimeter designed for the high luminosity upgrade of the CMS detector at CERN's Larg… ▽ More The advent of the silicon photomultiplier has allowed the development of highly segmented calorimeters using plastic scintillator as the active media, with photodetectors embedded in the calorimeter, in dimples in the plastic. To reduce the photodetector's dark current and radiation damage, the high granularity calorimeter designed for the high luminosity upgrade of the CMS detector at CERN's Large Hadron Collider will be operated at a temperature of about -30$^\circ$C. Due to flammability considerations, a low oxygen environment is being considered. However, the radiation damage to the plastic scintillator during irradiation in this operating environment needs to be considered. In this paper, we present measurements of the relative decrease of light output during irradiation of small plastic scintillator tiles read out by silicon photomultipliers. The irradiations were performed using a $^{60}\mathrm{Co}$ source both to produce the tiles' light and as a source of ionizing irradiation at dose rates of 0.3, 1.3, and $1.6\,$Gy/hr, temperatures of -30, -15, -5, and 0$^\circ$C, and with several different oxygen concentrations in the surrounding atmosphere. The effect of the material used to wrap the tile was also studied. Substantial temporary damage, which annealed when the sample was warmed, was seen during the low-temperature irradiations, regardless of the oxygen concentration and wrap** material. The relative light loss was largest with 3M$^{\tiny \textrm{TM}}$ Enhanced Specular Reflector Film wrap** and smallest with no wrap**, although due to the substantially higher light yield with wrap**, the final light output is largest with wrap**. The light loss was less at warmer temperatures. Damage with $3\%$ oxygen was similar to that in standard atmosphere. Evidence of a plateau in the radical density was seen for the 0$^\circ$C data. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Journal ref: Nucl. Instrum. Methods Phys. Res. A 1059 (2024) 168922

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Dose rate effects in radiation-induced changes to phenyl-based polymeric scintillators

Authors: Christos Papageorgakis, Mohamad Al-Sheikhly, Alberto Belloni, Timothy K. Edberg, Sarah C. Eno, Yongbin Feng, Geng-Yuan Jeng, Abraham Kahn, Yihui Lai, Tyler McDonnell, Christopher Palmer, Ruhi Perez-Gokhale, Francesca Ricci-Tam, Yao Yao, Zishuo Yang

Abstract: Results on the effects of ionizing radiation on the signal produced by plastic scintillating rods manufactured by Eljen Technology company are presented for various matrix materials, dopant concentrations, fluors (EJ-200 and EJ-260), anti-oxidant concentrations, scintillator thickness, doses, and dose rates. The light output before and after irradiation is measured using an alpha source and a phot… ▽ More Results on the effects of ionizing radiation on the signal produced by plastic scintillating rods manufactured by Eljen Technology company are presented for various matrix materials, dopant concentrations, fluors (EJ-200 and EJ-260), anti-oxidant concentrations, scintillator thickness, doses, and dose rates. The light output before and after irradiation is measured using an alpha source and a photomultiplier tube, and the light transmission by a spectrophotometer. Assuming an exponential decrease in the light output with dose, the change in light output is quantified using the exponential dose constant $D$. The $D$ values are similar for primary and secondary do** concentrations of 1 and 2 times, and for antioxidant concentrations of 0, 1, and 2 times, the default manufacturer's concentration. The $D$ value depends approximately linearly on the logarithm of the dose rate for dose rates between 2.2 Gy/hr and 70 Gy/hr for all materials. For EJ-200 polyvinyltoluene-based (PVT) scintillator, the dose constant is approximately linear in the logarithm of the dose rate up to 3400 Gy/hr, while for polystyrene-based (PS) scintillator or for both materials with EJ-260 fluors, it remains constant or decreases (depending on do** concentration) above about 100 Gy/hr. The results from rods of varying thickness and from the different fluors suggest damage to the initial light output is a larger effect than color center formation for scintillator thickness $\leq1$ cm. For the blue scintillator (EJ-200), the transmission measurements indicate damage to the fluors. We also find that while PVT is more resistant to radiation damage than PS at dose rates higher than about 100 Gy/hr for EJ-200 fluors, they show similar damage at lower dose rates and for EJ-260 fluors. △ Less

Submitted 8 August, 2023; v1 submitted 29 March, 2022; originally announced March 2022.

Comments: Replaced with published version. Added journal DOI. 24 pages, 11 figures, Published in Nuclear Instruments and Methods in Physics Research Section A

Journal ref: Nucl. Instrum. Methods Phys. Res. A 1042 (2022) 167445

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Re-Analysis of the Cassini RPWS/LP Data in Titan's Ionosphere: 2. Statistics on 57 Flybys

Authors: A. Chatain, J. -E. Wahlund, O. Shebanits, L. Z. Hadid, M. Morooka, N. J. T. Edberg, O. Guaitella, N. Carrasco

Abstract: The ionosphere of Titan hosts a complex ion chemistry leading to the formation of organic dust below 1200 km. Current models cannot fully explain the observed electron temperature in this dusty environment. To achieve new insight, we have re-analyzed the data taken in the ionosphere of Titan by the Cassini Langmuir probe (LP), part of the Radio and Plasma Wave Science package. A first paper (Chata… ▽ More The ionosphere of Titan hosts a complex ion chemistry leading to the formation of organic dust below 1200 km. Current models cannot fully explain the observed electron temperature in this dusty environment. To achieve new insight, we have re-analyzed the data taken in the ionosphere of Titan by the Cassini Langmuir probe (LP), part of the Radio and Plasma Wave Science package. A first paper (Chatain et al., 2021) introduces the new analysis method and discusses the identification of 4 electron populations produced by different ionization mechanisms. In this second paper, we present a statistical study of the whole LP dataset below 1200 km which gives clues on the origin of the 4 populations. One small population is attributed to photo- or secondary electrons emitted from the surface of the probe boom. A second population is systematically observed, at a constant density (~500 cm-3), and is attributed to background thermalized electrons from the ionization process of precipitating particles fom the surrounding magnetosphere. The two last populations increase in density with pressure, solar illumination and EUV flux. The third population is observed with varying densities at all altitudes and solar zenith angles except on the far nightside (SZA > ~140°), with a maximum density of 2700 cm-3. It is therefore certainly related to the photo-ionization of the atmospheric molecules. Finally, a fourth population detected only on the dayside and below 1200 km reaching up to 2000 cm-3 could be photo- or thermo-emitted from dust grains. △ Less

Submitted 16 February, 2022; v1 submitted 29 August, 2021; originally announced August 2021.

Comments: 25 pages, version accepted for publication in JGR

Journal ref: Journal of Geophysical Research: Space Physics, 126, e2020JA028413 (2021)

Re-Analysis of the Cassini RPWS/LP Data in Titan's Ionosphere: 1. Detection of Several Electron Populations

Authors: A. Chatain, J. -E. Wahlund, O. Shebanits, L. Z. Hadid, M. Morooka, N. J. T. Edberg, O. Guaitella, N. Carrasco

Abstract: Current models of Titan ionosphere have difficulties in explaining the observed electron density and/or temperature. In order to get new insights, we re-analyzed the data taken in the ionosphere of Titan by the Cassini Langmuir probe (LP), part of the Radio and Plasma Wave Science (RPWS) instrument. This is the first of two papers that present the new analysis method (current paper) and statistics… ▽ More Current models of Titan ionosphere have difficulties in explaining the observed electron density and/or temperature. In order to get new insights, we re-analyzed the data taken in the ionosphere of Titan by the Cassini Langmuir probe (LP), part of the Radio and Plasma Wave Science (RPWS) instrument. This is the first of two papers that present the new analysis method (current paper) and statistics on the whole dataset. We suggest that between 2 and 4 electron populations are necessary to fit the data. Each population is defined by a potential, an electron density and an electron temperature and is easily visualized by a dinstinct peak in the second derivative of the electron current, which is physically related to the electron energy distribution function (Druyvesteyn method). The detected populations vary with solar illumination and altitude. We suggest that the 4 electron populations are due to photo-ionization, magnetospheric particles, dusty plasma and electron emission from the probe boom, respectively. △ Less

Submitted 16 February, 2022; v1 submitted 29 August, 2021; originally announced August 2021.

Comments: 34 pages, version accepted for publication in JGR

Journal ref: Journal of Geophysical Research: Space Physics, 126, e2020JA028412 (2021)

Plasma densities, flow and Solar EUV flux at comet 67P - A cross-calibration approach

Authors: F. L. Johansson, A. I. Eriksson, E. Vigren, L. Bucciantini, P. Henri, H. Nilsson, S. Bergman, N. J. T. Edberg, G. Stenberg Wieser, E. Odelstad

Abstract: During its two-year mission at comet 67P, Rosetta nearly continuously monitored the inner coma plasma environment for gas production rates varying over three orders of magnitude, at distances to the nucleus from a few to a few hundred km. To achieve the best possible measurements, cross-calibration of the plasma instruments is needed. We construct with two different physical models to cross-calibr… ▽ More During its two-year mission at comet 67P, Rosetta nearly continuously monitored the inner coma plasma environment for gas production rates varying over three orders of magnitude, at distances to the nucleus from a few to a few hundred km. To achieve the best possible measurements, cross-calibration of the plasma instruments is needed. We construct with two different physical models to cross-calibrate the electron density as measured by the Mutual Impedance Probe (MIP) to the ion current and spacecraft potential as measured by the Rosetta Langmuir Probe (LAP), the latter validated with the Ion Composition Analyser (ICA). We retrieve a continuous plasma density dataset for the entire cometary mission with a much improved dynamical range compared to any plasma instrument alone and, at times, improve the temporal resolution from 0.24-0.74~Hz to 57.8~Hz. The new density dataset is consistent with the existing MIP density dataset and covers long time periods where densities were too low to be measured by MIP. The physical model also yields, at 3~hour time resolution, ion flow speeds as well as a proxy for the solar EUV flux from the photoemission from the Langmuir Probes. We report on two independent mission-wide estimates of the ion flow speed which are consistent with the bulk H$_2$O$^+$ ion velocities as measured by ICA. We find the ion flow to consistently be much faster than the neutral gas over the entire mission, lending further evidence that the ions are collisionally decoupled from the neutrals in the coma. RPC measurements of ion speeds are therefore not consistent with the assumptions made in previously published plasma density models of the comet ionosphere at the start and end of the mission. Also, the measured EUV flux is perfectly consistent with independently derived values previously published from Johansson et al. (2017) and lends support for the conclusions drawn therein. △ Less

Submitted 29 June, 2021; originally announced June 2021.

Comments: Accepted in A&A 2021. 23 pages, 13 figures

Journal ref: A&A 653, A128 (2021)

Statistical study of electron density turbulence and ion-cyclotron waves in the inner heliosphere: Solar Orbiter observations

Authors: F. Carbone, L. Sorriso-Valvo, Yu. V. Khotyaintsev, K. Steinvall, A. Vecchio, D. Telloni, E. Yordanova, D. B. Graham, N. J. T. Edberg, A. I. Eriksson, E. P. G. Johansson, C. L. Vásconez, M. Maksimovic, R. Bruno, R. D'Amicis, S. D. Bale, T. Chust, V. Krasnoselskikh, M. Kretzschmar, E. Lorfèvre, D. Plettemeier, J. Soucek, M. Steller, Š. Štverák, P. Trávnícek , et al. (5 additional authors not shown)

Abstract: The recently released spacecraft potential measured by the RPW instrument on-board Solar Orbiter has been used to estimate the solar wind electron density in the inner heliosphere. Solar-wind electron density measured during June 2020 has been analysed to obtain a thorough characterization of the turbulence and intermittency properties of the fluctuations. Magnetic field data have been used to des… ▽ More The recently released spacecraft potential measured by the RPW instrument on-board Solar Orbiter has been used to estimate the solar wind electron density in the inner heliosphere. Solar-wind electron density measured during June 2020 has been analysed to obtain a thorough characterization of the turbulence and intermittency properties of the fluctuations. Magnetic field data have been used to describe the presence of ion-scale waves. Selected intervals have been extracted to study and quantify the properties of turbulence. The Empirical Mode Decomposition has been used to obtain the generalized marginal Hilbert spectrum, equivalent to the structure functions analysis, and additionally reducing issues typical of non-stationary, short time series. The presence of waves was quantitatively determined introducing a parameter describing the time-dependent, frequency-filtered wave power. A well defined inertial range with power-law scaling has been found almost everywhere. However, the Kolmogorov scaling and the typical intermittency effects are only present in part of the samples. Other intervals have shallower spectra and more irregular intermittency, not described by models of turbulence. These are observed predominantly during intervals of enhanced ion frequency wave activity. Comparisons with compressible magnetic field intermittency (from the MAG instrument) and with an estimate of the solar wind velocity (using electric and magnetic field) are also provided to give general context and help determine the cause for the anomalous fluctuations. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Solar wind current sheets and deHoffmann-Teller analysis: First results of DC electric field measurements by Solar Orbiter

Authors: K. Steinvall, Yu. V. Khotyaintsev, G. Cozzani, A. Vaivads, E. Yordanova, A. I. Eriksson, N. J. T. Edberg, M. Maksimovic, S. D. Bale, T. Chust, V. Krasnoselskikh, M. Kretzschmar, E. Lorfèvre, D. Plettemeier, J. Souček, M. Steller, Š. Štverák, A. Vecchio, T. S. Horbury, H. O'Brien, V. Evans, A. Fedorov, P. Louarn, V. Génot, N. André , et al. (3 additional authors not shown)

Abstract: Solar Orbiter was launched on February 10, 2020 with the purpose of investigating solar and heliospheric physics using a payload of instruments designed for both remote and in-situ sensing. Similar to the recently launched Parker Solar Probe, and unlike earlier missions, Solar Orbiter carries instruments designed to measure the low frequency DC electric fields. In this paper we assess the quality… ▽ More Solar Orbiter was launched on February 10, 2020 with the purpose of investigating solar and heliospheric physics using a payload of instruments designed for both remote and in-situ sensing. Similar to the recently launched Parker Solar Probe, and unlike earlier missions, Solar Orbiter carries instruments designed to measure the low frequency DC electric fields. In this paper we assess the quality of the low-frequency DC electric field measured by the Radio and Plasma Waves instrument (RPW) on Solar Orbiter. In particular we investigate the possibility of using Solar Orbiter's DC electric and magnetic field data to estimate the solar wind speed. We use deHoffmann-Teller (HT) analysis based on measurements of the electric and magnetic fields to find the velocity of solar wind current sheets which minimizes a single component of the electric field. By comparing the HT velocity to proton velocity measured by the Proton and Alpha particle Sensor (PAS) we develop a simple model for the effective antenna length, $L_\text{eff}$ of the E-field probes. We then use the HT method to estimate the speed of the solar wind. Using the HT method, we find that the observed variations in $E_y$ are often in excellent agreement with the variations in the magnetic field. The magnitude of $E_y$, however, is uncertain due to the fact that the $L_\text{eff}$ depends on the plasma environment. We derive an empirical model relating $L_\text{eff}$ to the Debye length, which we can use to improve the estimate of $E_y$ and consequently the estimated solar wind speed. The low frequency electric field provided by RPW is of high quality. Using deHoffmann-Teller analysis, Solar Orbiter's magnetic and electric field measurements can be used to estimate the solar wind speed when plasma data is unavailable. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Comments: 7 pages, 4 figures

Journal ref: A&A 656, A9 (2021)

Kinetic Electrostatic Waves and their Association with Current Structures in the Solar Wind

Authors: D. B. Graham, Yu. V. Khotyaintsev, A. Vaivads, N. J. T. Edberg, A. I. Eriksson, E. Johansson, L. Sorriso-Valvo, M. Maksimovic, J. Souček, D. Píša, S. D. Bale, T. Chust, M. Kretzschmar, V. Krasnoselskikh, E. Lorfèvre, D. Plettemeier, M. Steller, Š. Štverák, P. Trávníček, A. Vecchio, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini

Abstract: A variety of kinetic waves develop in the solar wind. The relationship between these waves and larger-scale structures, such as current sheets and ongoing turbulence remain a topic of investigation. Similarly, the instabilities producing ion-acoustic waves in the solar wind remains an open question. The goals of this paper are to investigate kinetic electrostatic Langmuir and ion-acoustic waves in… ▽ More A variety of kinetic waves develop in the solar wind. The relationship between these waves and larger-scale structures, such as current sheets and ongoing turbulence remain a topic of investigation. Similarly, the instabilities producing ion-acoustic waves in the solar wind remains an open question. The goals of this paper are to investigate kinetic electrostatic Langmuir and ion-acoustic waves in the solar wind at 0.5 AU and determine whether current sheets and associated streaming instabilities can produce the observed waves. The relationship between these waves and currents is investigated statistically. Solar Orbiter's Radio and Plasma Waves instrument suite provides high-resolution snapshots of the fluctuating electric field. The Low Frequency Receiver resolves the waveforms of ion-acoustic waves and the Time Domain Sampler resolves the waveforms of both ion-acoustic and Langmuir waves. Using these waveform data we determine when these waves are observed in relation to current structures in the solar wind, estimated from the background magnetic field. Langmuir and ion-acoustic waves are frequently observed in the solar wind. Ion-acoustic waves are observed about 1% of the time at 0.5 AU. The waves are more likely to be observed in regions of enhanced currents. However, the waves typically do not occur at current structures themselves. The observed currents in the solar wind are too small to drive instability by the relative drift between single ion and electron populations. When multi-component ion and/or electron distributions are present the observed currents may be sufficient for instability. Ion beams are the most plausible source of ion-acoustic waves. The spacecraft potential is confirmed to be a reliable probe of the background electron density by comparing the peak frequencies of Langmuir waves with the plasma frequency calculated from the spacecraft potential. △ Less

Submitted 4 April, 2021; originally announced April 2021.

Comments: 13 pages, 12 figures

Journal ref: A&A 656, A23 (2021)

Density Fluctuations Associated with Turbulence and Waves: First Observations by Solar Orbiter

Authors: Yu. V. Khotyaintsev, D. B. Graham, A. Vaivads, K. Steinvall, N. J. T. Edberg, A. I. Eriksson, E. P. G. Johansson, L. Sorriso-Valvo, M. Maksimovic, S. D. Bale, T. Chust, V. Krasnoselskikh, M. Kretzschmar, E. Lorfèvre, D. Plettemeier, J. Souček, M. Steller, Š. Štverák, P. Trávníček, A. Vecchio, T. S. Horbury, H. O'Brien, V. Evans, V. Angelini

Abstract: We use the plasma density based on measurements of the probe-to-spacecraft potential in combination with magnetic field measurements by MAG to study fields and density fluctuations in the solar wind observed by Solar Orbiter during the first perihelion encounter ($\sim$0.5~AU away from the Sun). In particular we use the polarization of the wave magnetic field, the phase between the compressible ma… ▽ More We use the plasma density based on measurements of the probe-to-spacecraft potential in combination with magnetic field measurements by MAG to study fields and density fluctuations in the solar wind observed by Solar Orbiter during the first perihelion encounter ($\sim$0.5~AU away from the Sun). In particular we use the polarization of the wave magnetic field, the phase between the compressible magnetic field and density fluctuations and the compressibility ratio (the ratio of the normalized density fluctuations to the normalized compressible fluctuations of B) to characterize the observed waves and turbulence. We find that the density fluctuations are out-of-phase with the compressible component of magnetic fluctuations for intervals of turbulence, while they are in phase for the circular-polarized waves around the proton cyclotron frequency. We analyze in detail two specific events with simultaneous presence of left- and right-handed waves at different frequencies. We compare observed wave properties to a prediction of the three-fluid (electrons, protons and alphas) model. We find a limit on the observed wavenumbers, $10^{-6} < k < 7 \times 10^{-6}$~m$^{-1}$, which corresponds to wavelength $7 \times 10^6 >λ> 10^6$~m. We conclude that most likely both the left- and right-handed waves correspond to the low-wavenumber part (close to the cut-off at $Ω_{c\mathrm{He}++}$) proton-band electromagnetic ion cyclotron (left-handed wave in the plasma frame confined to the frequency range $Ω_{c\mathrm{He}++} < ω< Ω_{c\mathrm{H}+}$) waves propagating in the outwards and inwards directions respectively. The fact that both wave polarizations are observed at the same time and the identified wave mode has a low group velocity suggests that the double-banded events occur in the source regions of the waves. △ Less

Submitted 16 June, 2021; v1 submitted 31 March, 2021; originally announced March 2021.

Comments: 13 pages, 9 figures

Journal ref: A&A 656, A19 (2021)

Test Beam Study of SiPM-on-Tile Configurations

Authors: A. Belloni, Y. M. Chen, A. Dyshkant, T. K. Edberg, S. Eno, V. Zutshi, J. Freeman, M. Krohn, Y. Lai, D. Lincoln, S. Los, J. Mans, G. Reichenbach, L. Uplegger, S. A. Uzunyan

Abstract: Light yield and spatial uniformity for a large variety of configurations of scintillator tiles was studied. The light from each scintillator was collected by a Silicon Photomultiplier (SiPM) directly viewing the produced scintillation light (SiPM-on-tile technique). The varied parameters included tile transverse size, tile thickness, tile wrap** material, scintillator composition, and SiPM model… ▽ More Light yield and spatial uniformity for a large variety of configurations of scintillator tiles was studied. The light from each scintillator was collected by a Silicon Photomultiplier (SiPM) directly viewing the produced scintillation light (SiPM-on-tile technique). The varied parameters included tile transverse size, tile thickness, tile wrap** material, scintillator composition, and SiPM model. These studies were performed using 120 GeV protons at the Fermilab Test Beam Facility. External tracking allowed the position of each proton penetrating a tile to be measured. The results were compared to a GEANT4 simulation of each configuration of scinitillator, wrap**, and SiPM. △ Less

Submitted 17 May, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Comments: 19 pages, 15 figures, submitted to JINST

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs

Authors: D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, S. Aviles, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame, J. Bensinger , et al. (365 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent… ▽ More LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented. △ Less

Submitted 28 February, 2022; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: 45 pages (79 inc. tables), 7 figures, 9 tables

Journal ref: The European Physical Journal C, Volume 80, Article number: 1044 (2020)

Simulations of Events for the LUX-ZEPLIN (LZ) Dark Matter Experiment

Authors: The LUX-ZEPLIN Collaboration, :, D. S. Akerib, C. W. Akerlof, A. Alqahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, X. Bai, J. Balajthy, S. Balashov, J. Bang, D. Bauer, A. Baxter, J. Bensinger, E. P. Bernard, A. Bernstein, A. Bhatti, A. Biekert, T. P. Biesiadzinski, H. J. Birch, K. E. Boast , et al. (173 additional authors not shown)

Abstract: The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1--2)$\times10^{-12}$\,pb at a WIMP mass of 40 GeV/$c^2$. This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of par… ▽ More The LUX-ZEPLIN dark matter search aims to achieve a sensitivity to the WIMP-nucleon spin-independent cross-section down to (1--2)$\times10^{-12}$\,pb at a WIMP mass of 40 GeV/$c^2$. This paper describes the simulations framework that, along with radioactivity measurements, was used to support this projection, and also to provide mock data for validating reconstruction and analysis software. Of particular note are the event generators, which allow us to model the background radiation, and the detector response physics used in the production of raw signals, which can be converted into digitized waveforms similar to data from the operational detector. Inclusion of the detector response allows us to process simulated data using the same analysis routines as developed to process the experimental data. △ Less

Submitted 23 June, 2020; v1 submitted 25 January, 2020; originally announced January 2020.

Comments: 24 pages, 19 figures; Corresponding Authors: A. Cottle, V. Kudryavtsev, D. Woodward

The LUX-ZEPLIN (LZ) Experiment

Authors: The LZ Collaboration, D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, J. Barthel, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame , et al. (357 additional authors not shown)

Abstract: We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n… ▽ More We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements. △ Less

Submitted 3 November, 2019; v1 submitted 20 October, 2019; originally announced October 2019.

The evolution of the electron number density in the coma of comet 67P at the location of Rosetta from 2015 November through 2016 March

Authors: Erik Vigren, Niklas J. T. Edberg, Anders I. Eriksson, Marina Galand, Pierre Henri, Fredrik L. Johansson, Elias Odelstad, Martin Rubin, Xavier Vallieres

Abstract: A comet ionospheric model assuming the plasma to move radially outward with the same bulk speed as the neutral gas and not being subject to severe reduction through dissociative recombination has previously been tested in a series of case studies associated with the Rosetta mission at comet 67P/Churyumov-Gerasimenko. It has been found that at low activity and within several tens of km from the nuc… ▽ More A comet ionospheric model assuming the plasma to move radially outward with the same bulk speed as the neutral gas and not being subject to severe reduction through dissociative recombination has previously been tested in a series of case studies associated with the Rosetta mission at comet 67P/Churyumov-Gerasimenko. It has been found that at low activity and within several tens of km from the nucleus such models (which originally were developed for such conditions) generally work well in reproducing observed electron number densities, in particular when plasma production through both photoionization and electron-impact ionization is taken into account. Near perihelion, case studies have, on the contrary, showed that applying similar assumptions overestimates the observed electron number densities at the location of Rosetta. Here we compare ROSINA/COPS driven model results with RPC/MIP derived electron number densities for an extended time period (2015 November through 2016 March) during the post-perihelion phase with southern summer/spring. We observe a gradual transition from a state when the model grossly overestimates (by more than a factor of 10) the observations to being in reasonable agreement during 2016 March. △ Less

Submitted 2 September, 2019; originally announced September 2019.

Comments: (accepted version of manuscript)

Journal ref: The Astrophysical Journal, 881:6 (5pp) (2019)

Measurement of the Gamma Ray Background in the Davis Cavern at the Sanford Underground Research Facility

Authors: D. S. Akerib, C. W. Akerlof, S. K. Alsum, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, X. Bai, J. Balajthy, S. Balashov, A. Baxter, E. P. Bernard, A. Biekert, T. P. Biesiadzinski, K. E. Boast, B. Boxer, P. Brás, J. H. Buckley, V. V. Bugaev, S. Burdin, J. K. Busenitz, C. Carels, D. L. Carlsmith, M. C. Carmona-Benitez, M. Cascella , et al. (142 additional authors not shown)

Abstract: Deep underground environments are ideal for low background searches due to the attenuation of cosmic rays by passage through the earth. However, they are affected by backgrounds from $γ$-rays emitted by $^{40}$K and the $^{238}$U and $^{232}$Th decay chains in the surrounding rock. The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a liquid xenon TPC located with… ▽ More Deep underground environments are ideal for low background searches due to the attenuation of cosmic rays by passage through the earth. However, they are affected by backgrounds from $γ$-rays emitted by $^{40}$K and the $^{238}$U and $^{232}$Th decay chains in the surrounding rock. The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a liquid xenon TPC located within the Davis campus at the Sanford Underground Research Facility, Lead, South Dakota, at the 4,850-foot level. In order to characterise the cavern background, in-situ $γ$-ray measurements were taken with a sodium iodide detector in various locations and with lead shielding. The integral count rates (0--3300~keV) varied from 596~Hz to 1355~Hz for unshielded measurements, corresponding to a total flux in the cavern of $1.9\pm0.4$~$γ~$cm$^{-2}$s$^{-1}$. The resulting activity in the walls of the cavern can be characterised as $220\pm60$~Bq/kg of $^{40}$K, $29\pm15$~Bq/kg of $^{238}$U, and $13\pm3$~Bq/kg of $^{232}$Th. △ Less

Submitted 14 November, 2019; v1 submitted 3 April, 2019; originally announced April 2019.

Comments: 11 pages, 9 figures

Journal ref: Astroparticle Physics, Volume 116, Pages 102391 (2020)

Solar flares observed by Rosetta at comet 67P

Authors: N. J. T. Edberg, F. L. Johansson, A. I. Eriksson, D. J. Andrews, R. Hajra, P. Henri, C. Simon Wedlund, M. Alho, E. Thiemann

Abstract: Context. The Rosetta spacecraft made continuous measurements of the coma of comet 67P/ Churyumov-Gerasimenko (67P) for more than two years. The plasma in the coma appeared very dynamic, and many factors control its variability. Aims. We wish to identify the effects of solar flares on the comet plasma and also their effect on the measurements by the Langmuir Probe Instrument (LAP). Methods. To iden… ▽ More Context. The Rosetta spacecraft made continuous measurements of the coma of comet 67P/ Churyumov-Gerasimenko (67P) for more than two years. The plasma in the coma appeared very dynamic, and many factors control its variability. Aims. We wish to identify the effects of solar flares on the comet plasma and also their effect on the measurements by the Langmuir Probe Instrument (LAP). Methods. To identify the effects of flares, we proceeded from an existing flare catalog of Earth-directed solar flares, from which a new list was created that only included Rosetta-directed flares. We also used measurements of flares at Mars when at similar longitudes as Rosetta. The flare irradiance spectral model (FISM v.1) and its Mars equivalent (FISM-M) produce an extreme-ultraviolet (EUV) irradiance (10-120 nm) of the flares at 1 min resolution. LAP data and density measurements obtained with the Mutual Impedence Probe (MIP) from the time of arrival of the flares at Rosetta were examined to determine the flare effects. Results. From the vantage point of Earth, 1504 flares directed toward Rosetta occurred during the mission. In only 24 of these, that is, 1.6%, was the increase in EUV irradiance large enough to cause an observable effect in LAP data. Twenty-four Mars-directed flares were also observed in Rosetta data. The effect of the flares was to increase the photoelectron current by typically 1-5 nA. We find little evidence that the solar flares increase the plasma density, at least not above the background variability. Conclusions. Solar flares have a small effect on the photoelectron current of the LAP instrument, and they are not significant in comparison to other factors that control the plasma density in the coma. The photoelectron current can only be used for flare detection during periods of calm plasma conditions. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Comments: 13 pages, 9 figures

Journal ref: A&A 630, A49 (2019)

Solar wind interaction with comet 67P: impacts of corotating interaction regions

Authors: Niklas J. T. Edberg, A. I. Eriksson, E. Odelstad, E. Vigren, D. J. Andrews, F. Johansson, J. L. Burch, C. M. Carr, E. Cupido, K. -H. Glassmeier, R. Goldstein, J. S. Halekas, P. Henri, J. -P. Lebreton, K. Mandt, P. Mokashi, Z. Nemeth, H. Nilsson, R. Ramstad, I. Richter, G. Stenberg Wieser

Abstract: We present observations from the Rosetta Plasma Consortium of the effects of stormy solar wind on comet 67P/Churyumov-Gerasimenko. Four corotating interaction regions (CIRs), where the first event has possibly merged with a CME, are traced from Earth via Mars (using Mars Express and MAVEN) and to comet 67P from October to December 2014. When the comet is 3.1-2.7 AU from the Sun and the neutral out… ▽ More We present observations from the Rosetta Plasma Consortium of the effects of stormy solar wind on comet 67P/Churyumov-Gerasimenko. Four corotating interaction regions (CIRs), where the first event has possibly merged with a CME, are traced from Earth via Mars (using Mars Express and MAVEN) and to comet 67P from October to December 2014. When the comet is 3.1-2.7 AU from the Sun and the neutral outgassing rate $\sim10^{25}-10^{26}$ s$^{-1}$ the CIRs significantly influence the cometary plasma environment at altitudes down to 10-30 km. The ionospheric low-energy \textcolor{black}{($\sim$5 eV) plasma density increases significantly in all events, by a factor $>2$ in events 1-2 but less in events 3-4. The spacecraft potential drops below -20V upon impact when the flux of electrons increases}. The increased density is \textcolor{black}{likely} caused by compression of the plasma environment, increased particle impact ionisation, and possibly charge exchange processes and acceleration of mass loaded plasma back to the comet ionosphere. During all events, the fluxes of suprathermal ($\sim$10-100 eV) electrons increase significantly, suggesting that the heating mechanism of these electrons is coupled to the solar wind energy input. At impact the magnetic field strength in the coma increases by a factor of ~2-5 as more interplanetary magnetic field piles up around of the comet. During two CIR impact events, we observe possible plasma boundaries forming, or moving past Rosetta, as the strong solar wind compresses the cometary plasma environment. \textcolor{black}{We also discuss the possibility of seeing some signatures of the ionospheric response to tail disconnection events △ Less

Submitted 14 September, 2018; originally announced September 2018.

Comments: 17 pages, 8 figures

Journal ref: Solar wind interaction with comet 67P: Impacts of corotating interaction regions, J. Geophys. Res. Space Physics, 121, 949-965, 2016

CME impact on comet 67P/Churyumov-Gerasimenko

Authors: Niklas J. T. Edberg, M. Alho, M. André, D. J. Andrews, E. Behar, J. L. Burch, C. M. Carr, E. Cupido, I. A. D. Engelhardt, A. I. Eriksson, K. -H. Glassmeier, C. Goetz, R. Goldstein, P. Henri, F. L. Johansson, C. Koenders, K. Mandt, H. Nilsson, E. Odelstad, I. Richter, C. Simon Wedlund, G. Stenberg Wieser, K. Szego, E. Vigren, M. Volwerk

Abstract: We present Rosetta observations from comet 67P/Churyumov-Gerasimenko during the impact of a coronal mass ejection (CME). The CME impacted on 5-6 Oct 2015, when Rosetta was about 800 km from the comet nucleus, \textcolor{black}{and 1.4 AU from the Sun}. Upon impact, the plasma environment is compressed to the level that solar wind ions, not seen a few days earlier when at 1500 km, now reach Rosetta… ▽ More We present Rosetta observations from comet 67P/Churyumov-Gerasimenko during the impact of a coronal mass ejection (CME). The CME impacted on 5-6 Oct 2015, when Rosetta was about 800 km from the comet nucleus, \textcolor{black}{and 1.4 AU from the Sun}. Upon impact, the plasma environment is compressed to the level that solar wind ions, not seen a few days earlier when at 1500 km, now reach Rosetta. In response to the compression, the flux of suprathermal electrons increases by a factor of 5-10 and the background magnetic field strength increases by a factor of $\sim$2.5. The plasma density increases by a factor of 10 and reaches 600 cm$^{-3}$, due to increased particle impact ionisation, charge exchange and the adiabatic compression of the plasma environment. We also observe unprecedentedly large magnetic field spikes at 800 km, reaching above 200 nT, which are interpreted as magnetic flux ropes. We suggest that these could possibly be formed by magnetic reconnection processes in the coma as the magnetic field across the CME changes polarity, or as a consequence of strong shears causing Kelvin-Helmholtz instabilities in the plasma flow. Due to the \textcolor{black}{limited orbit of Rosetta}, we are not able to observe if a tail disconnection occurs during the CME impact, which could be expected based on previous remote observations of other CME-comet interactions. △ Less

Submitted 13 September, 2018; originally announced September 2018.

Comments: 14 pages, 12 figures

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 462, 2016

Titan's variable ionosphere during the T118-T119 Cassini flybys

Authors: N. J. T. Edberg, E. Vigren, D. Snowden, L. H. Regoli, O. Shebanits, J. -E. Wahlund, D. J. Andrews, C. Bertucci, J. Cui

Abstract: A significant difference in Titan's ionospheric electron density is observed between the T118 and T119 Cassini nightside flybys. These flybys had similar geometry, occurred at the same Saturn local time and while Titan was exposed to similar EUV and ambient magnetic field conditions. Despite these similarities, the RPWS/LP measured density differed a factor of 5 between the passes. This difference… ▽ More A significant difference in Titan's ionospheric electron density is observed between the T118 and T119 Cassini nightside flybys. These flybys had similar geometry, occurred at the same Saturn local time and while Titan was exposed to similar EUV and ambient magnetic field conditions. Despite these similarities, the RPWS/LP measured density differed a factor of 5 between the passes. This difference was present, and similar, both inbound and outbound. Two distinct electron peaks were present during T118, at 1150 km and 1200 km, suggesting very localised plasma production. During T118, from 1200-1350 km and below 1100 km, the lowest electron density ever observed in Titan's ionosphere are reported. We suggest that an exceptionally low rate of particle impact ionisation in combination with increased dynamics in the ionosphere could be the cause. This is, however, not verified by measurements and the measured ambient high energy particle pressure is in fact higher during T118 than during T119. △ Less

Submitted 13 September, 2018; originally announced September 2018.

Comments: 11 pages, 3 figures

Journal ref: Edberg, N. J. T., et al. (2018). Titan's variable ionosphere during the T118 and T119 Cassini flybys. Geophysical Research Letters, 45. https://doi.org/10.1029/2018GL078436

MARSIS observations of field-aligned irregularities and ducted radio propagation in the Martian ionosphere

Authors: David J. Andrews, Hermann J. Opgenoorth, Thomas B. Leyser, Stephan Buchert, Niklas J. T. Edberg, David D. Morgan, Donald A. Gurnett, Andrew J. Kopf, Katy Fallows, Paul Withers

Abstract: Knowledge of Mars's ionosphere has been significantly advanced in recent years by observations from Mars Express (MEX) and lately MAVEN. A topic of particular interest are the interactions between the planet's ionospheric plasma and its highly structured crustal magnetic fields, and how these lead to the redistribution of plasma and affect the propagation of radio waves in the system. In this pape… ▽ More Knowledge of Mars's ionosphere has been significantly advanced in recent years by observations from Mars Express (MEX) and lately MAVEN. A topic of particular interest are the interactions between the planet's ionospheric plasma and its highly structured crustal magnetic fields, and how these lead to the redistribution of plasma and affect the propagation of radio waves in the system. In this paper, we elucidate a possible relationship between two anomalous radar signatures previously reported in observations from the MARSIS instrument on MEX. Relatively uncommon observations of localized, extreme increases in the ionospheric peak density in regions of radial (cusp-like) magnetic fields and spread-echo radar signatures are shown to be coincident with ducting of the same radar pulses at higher altitudes on the same field lines. We suggest that these two observations are both caused by a high electric field (perpendicular to $\mathbf{B}$) having distinctly different effects in two altitude regimes. At lower altitudes, where ions are demagnetized and electrons magnetized, and recombination dominantes, a high electric field causes irregularities, plasma turbulence, electron heating, slower recombination and ultimately enhanced plasma densities. However, at higher altitudes, where both ions and electrons are magnetized and atomic oxygen ions cannot recombine directly, the high electric field instead causes frictional heating, a faster production of molecular ions by charge exchange, and so a density decrease. The latter enables ducting of radar pulses on closed field lines, in an analogous fashion to inter-hemispheric ducting in the Earth's ionosphere. △ Less

Submitted 15 August, 2018; originally announced August 2018.

Comments: 17 pages, 4 figures

Journal ref: Journal of Geophysical Research: Space Physics, 2018, 123

Study of radon reduction in gases for rare event search experiments

Authors: K. Pushkin, C. Akerlof, D. Anbajagane, J. Armstrong, M. Arthurs, J. Bringewatt, T. Edberg, C. Hall, M. Lei, R. Raymond, M. Reh, D. Saini, A. Sander, J. Schaefer, D. Seymour, N. Swanson, Y. Wang, W. Lorenzon

Abstract: The noble elements, argon and xenon, are frequently employed as the target and event detector for weakly interacting particles such as neutrinos and Dark Matter. For such rare processes, background radiation must be carefully minimized. Radon provides one of the most significant contaminants since it is an inevitable product of trace amounts of natural uranium. To design a purification system for… ▽ More The noble elements, argon and xenon, are frequently employed as the target and event detector for weakly interacting particles such as neutrinos and Dark Matter. For such rare processes, background radiation must be carefully minimized. Radon provides one of the most significant contaminants since it is an inevitable product of trace amounts of natural uranium. To design a purification system for reducing such contamination, the adsorption characteristics of radon in nitrogen, argon, and xenon carrier gases on various types of charcoals with different adsorbing properties and intrinsic radioactive purities have been studied in the temperature range of 190-295 K at flow rates of 0.5 and 2 standard liters per minute. Essential performance parameters for the various charcoals include the average breakthrough times ($τ$), dynamic adsorption coefficients (k$_a$) and the number of theoretical stages (n). It is shown that the k$_a$-values for radon in nitrogen, argon, and xenon increase as the temperature of the charcoal traps decreases, and that they are significantly larger in nitrogen and argon than in xenon gas due to adsorption saturation effects. It is found that, unlike in xenon, the dynamic adsorption coefficients for radon in nitrogen and argon strictly obey the Arrhenius law. The experimental results strongly indicate that nitric acid etched Saratech is the best candidate among all used charcoal brands. It allows reducing total radon concentration in the LZ liquid Xe detector to meet the ultimate goal in the search for Dark Matter. △ Less

Submitted 29 June, 2018; v1 submitted 29 May, 2018; originally announced May 2018.

Comments: 11 pages, 10 figures

Projected WIMP sensitivity of the LUX-ZEPLIN (LZ) dark matter experiment

Authors: D. S. Akerib, C. W. Akerlof, S. K. Alsum, H. M. Araújo, M. Arthurs, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, D. Bauer, J. Belle, P. Beltrame, T. Benson, E. P. Bernard, T. P. Biesiadzinski, K. E. Boast, B. Boxer, P. Brás, J. H. Buckley, V. V. Bugaev, S. Burdin, J. K. Busenitz, C. Carels, D. L. Carlsmith, B. Carlson , et al. (153 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a next generation dark matter direct detection experiment that will operate 4850 feet underground at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. Using a two-phase xenon detector with an active mass of 7~tonnes, LZ will search primarily for low-energy interactions with Weakly Interacting Massive Particles (WIMPs), which are hypothesized to make up… ▽ More LUX-ZEPLIN (LZ) is a next generation dark matter direct detection experiment that will operate 4850 feet underground at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. Using a two-phase xenon detector with an active mass of 7~tonnes, LZ will search primarily for low-energy interactions with Weakly Interacting Massive Particles (WIMPs), which are hypothesized to make up the dark matter in our galactic halo. In this paper, the projected WIMP sensitivity of LZ is presented based on the latest background estimates and simulations of the detector. For a 1000~live day run using a 5.6~tonne fiducial mass, LZ is projected to exclude at 90\% confidence level spin-independent WIMP-nucleon cross sections above $1.4 \times 10^{-48}$~cm$^{2}$ for a 40~$\mathrm{GeV}/c^{2}$ mass WIMP. Additionally, a $5σ$ discovery potential is projected reaching cross sections below the exclusion limits of recent experiments. For spin-dependent WIMP-neutron(-proton) scattering, a sensitivity of $2.3 \times 10^{-43}$~cm$^{2}$ ($7.1 \times 10^{-42}$~cm$^{2}$) for a 40~$\mathrm{GeV}/c^{2}$ mass WIMP is expected. With underground installation well underway, LZ is on track for commissioning at SURF in 2020. △ Less

Submitted 2 December, 2019; v1 submitted 16 February, 2018; originally announced February 2018.

Comments: 14 pages, 11 figures

Journal ref: Phys. Rev. D 101, 052002 (2020)

Rosetta photoelectron emission and solar ultraviolet flux at comet 67P

Authors: Fredrik L. Johansson, E. Odelstad, J. J. P. Paulsson, S. S. Harang, A. I. Eriksson, T. Mannel, E. Vigren, N. J. T. Edberg, W. J. Miloch, C. Simon Wedlund, E. Thiemann, F. Eparvier, L. Andersson

Abstract: The Langmuir Probe instrument on Rosetta monitored the photoelectron emission cur- rent of the probes during the Rosetta mission at comet 67P/Churyumov-Gerasimenko, in essence acting as a photodiode monitoring the solar ultraviolet radiation at wave- lengths below 250 nm. We have used three methods of extracting the photoelectron saturation current from the Langmuir probe measurements. The resulti… ▽ More The Langmuir Probe instrument on Rosetta monitored the photoelectron emission cur- rent of the probes during the Rosetta mission at comet 67P/Churyumov-Gerasimenko, in essence acting as a photodiode monitoring the solar ultraviolet radiation at wave- lengths below 250 nm. We have used three methods of extracting the photoelectron saturation current from the Langmuir probe measurements. The resulting dataset can be used as an index of the solar far and extreme ultraviolet at the Rosetta spacecraft position, including flares, in wavelengths that are important for photoionisation of the cometary neutral gas. Comparing the photoemission current to data measurements by MAVEN/EUVM and TIMED/SEE, we find good correlation when 67P was at large heliocentric distances early and late in the mission, but up to 50 percent decrease of the expected photoelectron current at perihelion. We discuss possible reasons for the photoemission decrease, including scattering and absorption by nanograins created by disintegration of cometary dust far away from the nucleus. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: 11 pages, 8 figures, accepted for publication in MNRAS

Constraining Radon Backgrounds in LZ

Authors: E. H. Miller, J. Busenitz, T. K. Edberg, C. Ghag, C. Hall, R. Leonard, K. Lesko, X. Liu, Yue Meng, A. Piepke, R. W. Schnee

Abstract: The LZ dark matter detector, like many other rare-event searches, will suffer from backgrounds due to the radioactive decay of radon daughters. In order to achieve its science goals, the concentration of radon within the xenon should not exceed $2μ$Bq/kg, or 20 mBq total within its 10 tonnes. The LZ collaboration is in the midst of a program to screen all significant components in contact with the… ▽ More The LZ dark matter detector, like many other rare-event searches, will suffer from backgrounds due to the radioactive decay of radon daughters. In order to achieve its science goals, the concentration of radon within the xenon should not exceed $2μ$Bq/kg, or 20 mBq total within its 10 tonnes. The LZ collaboration is in the midst of a program to screen all significant components in contact with the xenon. The four institutions involved in this effort have begun sharing two cross-calibration sources to ensure consistent measurement results across multiple distinct devices. We present here five preliminary screening results, some mitigation strategies that will reduce the amount of radon produced by the most problematic components, and a summary of the current estimate of radon emanation throughout the detector. This best estimate totals $<17.3$ mBq, sufficiently low to meet the detector's science goals. △ Less

Submitted 28 August, 2017; originally announced August 2017.

Comments: Low Radioactivity Techniques (LRT) 2017 Workshop Proceedings. 6 pages; 3 figures

Cold and warm electrons at comet 67P

Authors: A. I. Eriksson, I. A. D. Engelhardt, M. Andre, R. Bostrom, N. J. T. Edberg, F. L. Johansson, E. Odelstad, E. Vigren, J. -E. Wahlund, P. Henri, J. -P. Lebreton, W. J. Miloch, J. J. P. Paulsson, C. Simon Wedlund, L. Yang, T. Karlsson, R. Jarvinen, T. Broiles, K. Mandt, C. M. Carr, M. Galand, H. Nilsson, C. Norberg

Abstract: Strong electron cooling on the neutral gas in cometary comae has been predicted for a long time, but actual measurements of low electron temperature are scarce. We present in situ measurements of plasma density, electron temperature and spacecraft potential by the Rosetta Langmuir probe instrument, LAP. Data acquired within a few hundred km from the nucleus are dominated by a warm component with e… ▽ More Strong electron cooling on the neutral gas in cometary comae has been predicted for a long time, but actual measurements of low electron temperature are scarce. We present in situ measurements of plasma density, electron temperature and spacecraft potential by the Rosetta Langmuir probe instrument, LAP. Data acquired within a few hundred km from the nucleus are dominated by a warm component with electron temperature typically 5--10 eV at all heliocentric distances covered (1.25 to 3.83 AU). A cold component, with temperature no higher than about 0.1 eV, appears in the data as short (few to few tens of seconds) pulses of high probe current, indicating local enhancement of plasma density as well as a decrease in electron temperature. These pulses first appeared around 3 AU and were seen for longer periods close to perihelion. The general pattern of pulse appearance follows that of neutral gas and plasma density. We have not identified any periods with only cold electrons present. The electron flux to Rosetta was always dominated by higher energies, driving the spacecraft potential to order -10 V. The warm (5--10 eV) electron population is interpreted as electrons retaining the energy they obtained when released in the ionisation process. The sometimes observed cold populations with electron temperatures below 0.1 eV verify collisional cooling in the coma. The cold electrons were only observed together with the warm population. The general appearance of the cold population appears to be consistent with a Haser-like model, implicitly supporting also the coupling of ions to the neutral gas. The expanding cold plasma is unstable, forming filaments that we observe as pulses. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Journal ref: Astronomy and Astrophysics (2016) 30159

LUX-ZEPLIN (LZ) Technical Design Report

Authors: B. J. Mount, S. Hans, R. Rosero, M. Yeh, C. Chan, R. J. Gaitskell, D. Q. Huang, J. Makkinje, D. C. Malling, M. Pangilinan, C. A. Rhyne, W. C. Taylor, J. R. Verbus, Y. D. Kim, H. S. Lee, J. Lee, D. S. Leonard, J. Li, J. Belle, A. Cottle, W. H. Lippincott, D. J. Markley, T. J. Martin, M. Sarychev, T. E. Tope , et al. (237 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters. In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Comments: 392 pages. Submitted to the Department of Energy as part of the documentation for the Critical Decision Numbers Two and Three (CD-2 and CD-3) management processes. Report also available by chapter at <a href="http://hep.ucsb.edu/LZ/TDR/">this URL</a>

Report number: LBNL-1007256

Identification of Radiopure Titanium for the LZ Dark Matter Experiment and Future Rare Event Searches

Authors: D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, S. K. Alsum, H. M. Araújo, I. J. Arnquist, M. Arthurs, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, M. J. Barry, J. Belle, P. Beltrame, T. Benson, E. P. Bernard, A. Bernstein, T. P. Biesiadzinski, K. E. Boast, A. Bolozdynya, B. Boxer, R. Bramante, P. Brás, J. H. Buckley, V. V. Bugaev , et al. (180 additional authors not shown)

Abstract: The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a detector containing a total of 10 tonnes of liquid xenon within a double-vessel cryostat. The large mass and proximity of the cryostat to the active detector volume demand the use of material with extremely low intrinsic radioactivity. We report on the radioassay campaign conducted to identify suitable metals,… ▽ More The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a detector containing a total of 10 tonnes of liquid xenon within a double-vessel cryostat. The large mass and proximity of the cryostat to the active detector volume demand the use of material with extremely low intrinsic radioactivity. We report on the radioassay campaign conducted to identify suitable metals, the determination of factors limiting radiopure production, and the selection of titanium for construction of the LZ cryostat and other detector components. This titanium has been measured with activities of $^{238}$U$_{e}$~$<$1.6~mBq/kg, $^{238}$U$_{l}$~$<$0.09~mBq/kg, $^{232}$Th$_{e}$~$=0.28\pm 0.03$~mBq/kg, $^{232}$Th$_{l}$~$=0.25\pm 0.02$~mBq/kg, $^{40}$K~$<$0.54~mBq/kg, and $^{60}$Co~$<$0.02~mBq/kg (68\% CL). Such low intrinsic activities, which are some of the lowest ever reported for titanium, enable its use for future dark matter and other rare event searches. Monte Carlo simulations have been performed to assess the expected background contribution from the LZ cryostat with this radioactivity. In 1,000 days of WIMP search exposure of a 5.6-tonne fiducial mass, the cryostat will contribute only a mean background of $0.160\pm0.001$(stat)$\pm0.030$(sys) counts. △ Less

Submitted 26 September, 2017; v1 submitted 8 February, 2017; originally announced February 2017.

Comments: 13 pages, 3 figures, accepted for publication in Astroparticle Physics

Spatial distribution of low-energy plasma around comet 67P/CG from Rosetta measurements

Authors: N. J. T. Edberg, A. I. Eriksson, E. Odelstad, P. Henri, J. -P. Lebreton, S. Gasc, M. Rubin, M. André, R. Gill, E. P. G. Johansson, F. Johansson, E. Vigren, J. E. Wahlund, C. M. Carr, E. Cupido, K. -H. Glassmeier, R. Goldstein, C. Koenders, K. Mandt, Z. Nemeth, H. Nilsson, I. Richter, G. Stenberg Wieser, K. Szego, M. Volwerk

Abstract: We use measurements from the Rosetta plasma consortium (RPC) Langmuir probe (LAP) and mutual impedance probe (MIP) to study the spatial distribution of low-energy plasma in the near-nucleus coma of comet 67P/Churyumov-Gerasimenko. The spatial distribution is highly structured with the highest density in the summer hemisphere and above the region connecting the two main lobes of the comet, i.e. the… ▽ More We use measurements from the Rosetta plasma consortium (RPC) Langmuir probe (LAP) and mutual impedance probe (MIP) to study the spatial distribution of low-energy plasma in the near-nucleus coma of comet 67P/Churyumov-Gerasimenko. The spatial distribution is highly structured with the highest density in the summer hemisphere and above the region connecting the two main lobes of the comet, i.e. the neck region. There is a clear correlation with the neutral density and the plasma to neutral density ratio is found to be about 1-2x10^-6, at a cometocentric distance of 10 km and at 3.1 AU from the sun. A clear 6.2 h modulation of the plasma is seen as the neck is exposed twice per rotation. The electron density of the collisonless plasma within 260 km from the nucleus falls of with radial distance as about 1/r. The spatial structure indicates that local ionization of neutral gas is the dominant source of low-energy plasma around the comet. △ Less

Submitted 24 August, 2016; originally announced August 2016.

Comments: 7 pages, 3 figures

Journal ref: Geophys. Res. Lett., 42 (2015)

Plasma observations during the Mars atmospheric "plume" event of March-April 2012

Authors: D. J. Andrews, S. Barabash, N. J. T. Edberg, D. A. Gurnett, B. E. S. Hall, M. Holmström, M. Lester, D. D. Morgan, H. J. Opgenoorth, R. Ramstad, B. Sanchez-Cano, M. Way, O. Witasse

Abstract: We present initial analysis and conclusions from plasma observations made during the reported "Mars plume event" of March - April 2012. During this period, multiple independent amateur observers detected a localized, high-altitude "plume" over the Martian dawn terminator [Sanchez-Lavega et al., Nature, 2015, doi:10.1038/nature14162], the cause of which remains to be explained. The estimated bright… ▽ More We present initial analysis and conclusions from plasma observations made during the reported "Mars plume event" of March - April 2012. During this period, multiple independent amateur observers detected a localized, high-altitude "plume" over the Martian dawn terminator [Sanchez-Lavega et al., Nature, 2015, doi:10.1038/nature14162], the cause of which remains to be explained. The estimated brightness of the plume exceeds that expected for auroral emissions, and its projected altitude greatly exceeds that at which clouds are expected to form. We report on in-situ measurements of ionospheric plasma density and solar wind parameters throughout this interval made by Mars Express, obtained over the same surface region, but at the opposing terminator. Measurements in the ionosphere at the corresponding location frequently show a disturbed structure, though this is not atypical for such regions with intense crustal magnetic fields. We tentatively conclude that the formation and/or transport of this plume to the altitudes where it was observed could be due in part to the result of a large interplanetary coronal mass ejection (ICME) encountering the Martian system. Interestingly, we note that the only similar plume detection in May 1997 may also have been associated with a large ICME impact at Mars. △ Less

Submitted 18 March, 2016; originally announced March 2016.

Comments: 21 pages, 6 figures, article accepted for publication in J. Geophys. Res

Journal ref: J. Geophys. Res. Space Physics 121 (2016)

LUX-ZEPLIN (LZ) Conceptual Design Report

Authors: The LZ Collaboration, D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, S. K. Alsum, H. M. Araújo, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, M. J. Barry, P. Bauer, P. Beltrame, E. P. Bernard, A. Bernstein, T. P. Biesiadzinski, K. E. Boast, A. I. Bolozdynya, E. M. Boulton, R. Bramante, J. H. Buckley, V. V. Bugaev, R. Bunker, S. Burdin, J. K. Busenitz , et al. (170 additional authors not shown)

Abstract: The design and performance of the LUX-ZEPLIN (LZ) detector is described as of March 2015 in this Conceptual Design Report. LZ is a second-generation dark-matter detector with the potential for unprecedented sensitivity to weakly interacting massive particles (WIMPs) of masses from a few GeV/c2 to hundreds of TeV/c2. With total liquid xenon mass of about 10 tonnes, LZ will be the most sensitive exp… ▽ More The design and performance of the LUX-ZEPLIN (LZ) detector is described as of March 2015 in this Conceptual Design Report. LZ is a second-generation dark-matter detector with the potential for unprecedented sensitivity to weakly interacting massive particles (WIMPs) of masses from a few GeV/c2 to hundreds of TeV/c2. With total liquid xenon mass of about 10 tonnes, LZ will be the most sensitive experiment for WIMPs in this mass region by the end of the decade. This report describes in detail the design of the LZ technical systems. Expected backgrounds are quantified and the performance of the experiment is presented. The LZ detector will be located at the Sanford Underground Research Facility in South Dakota. The organization of the LZ Project and a summary of the expected cost and current schedule are given. △ Less

Submitted 23 September, 2015; v1 submitted 9 September, 2015; originally announced September 2015.

Comments: 278 pages. Submitted to the Department of Energy as part of the documentation for the Critical Decision Number One (CD-1) management process. Report also available by chapter at http://hep.ucsb.edu/LZ/CDR. This version includes corrections of minor typographic errors

Report number: LBNL-190005

Titan interaction with the supersonic solar wind

Authors: C. Bertucci, D. C. Hamilton, W. S. Kurth, G. Hospodarsky, D. Mitchell, N. Sergis, N. J. T. Edberg, M. K. Dougherty

Abstract: After 9 years in the Saturn system, the Cassini spacecraft finally observed Titan in the supersonic solar wind. These unique observations reveal that Titan interaction with the solar wind is in many ways similar to un-magnetized planets Mars and Venus in spite of the differences in the properties of the solar plasma in the outer solar system. In particular, Cassini detected a collisionless, superc… ▽ More After 9 years in the Saturn system, the Cassini spacecraft finally observed Titan in the supersonic solar wind. These unique observations reveal that Titan interaction with the solar wind is in many ways similar to un-magnetized planets Mars and Venus in spite of the differences in the properties of the solar plasma in the outer solar system. In particular, Cassini detected a collisionless, supercritical bow shock and a well-defined induced magnetosphere filled with mass-loaded interplanetary magnetic field lines, which drape around Titan ionosphere. Although the flyby altitude may not allow the detection of an ionopause, Cassini reports enhancements of plasma density compatible with plasma clouds or streamers in the flanks of its induced magnetosphere or due to an expansion of the induced magnetosphere. Because of the upstream conditions, these observations are also relevant for unmagnetized bodies in the outer solar system such as Pluto, where kinetic processes are expected to dominate. △ Less

Submitted 15 October, 2014; originally announced October 2014.

Comments: 17 pages, 3 figures