-
Longitudinal spin-relaxation optimization for miniaturized optically pumped magnetometers
Authors:
A. P. McWilliam,
S. Dyer,
D. Hunter,
M. Mrozowski,
S. J. Ingleby,
O. Sharp,
D. P. Burt,
P. F. Griffin,
J. P. McGilligan,
E. Riis
Abstract:
The microfabrication of cesium vapor cells for optically pumped magnetometry relies on optimization of buffer gas pressure in order to maximize atomic coherence time and sensitivity to external magnetic signals. We demonstrate post-bond nitrogen buffer gas pressure tuning through localized heating of an integrated micro-pill dispenser. We characterize the variation in the intrinsic longitudinal re…
▽ More
The microfabrication of cesium vapor cells for optically pumped magnetometry relies on optimization of buffer gas pressure in order to maximize atomic coherence time and sensitivity to external magnetic signals. We demonstrate post-bond nitrogen buffer gas pressure tuning through localized heating of an integrated micro-pill dispenser. We characterize the variation in the intrinsic longitudinal relaxation rate, $γ_{10}$, and magnetic sensitivity, as a function of the resulting nitrogen buffer gas pressure. Measurements are conducted through employing an optically pumped magnetometer operating in a free-induction-decay configuration. $γ_{10}$ is extracted across a range of nitrogen pressures between $\sim$~60~-~700~Torr, measuring a minimum of 140~Hz at 115~Torr. Additionally, we achieve sensitivities as low as 130 ~fT/$\sqrt{\text{Hz}}$ at a bias field amplitude of $\sim 50~μ$T. With the optimal nitrogen buffer gas pressure now quantified and achievable post-fabrication, these mass-producible cells can be tailored to suit a variety of sensing applications, ensuring peak magnetometer performance.
△ Less
Submitted 3 July, 2024; v1 submitted 27 June, 2024;
originally announced June 2024.
-
Real-time buffer gas pressure tuning in a micro-machined vapor cell
Authors:
S. Dyer,
A. McWilliam,
D. Hunter,
S. Ingleby,
D. P. Burt,
O. Sharp,
F. Mirando,
P. F. Griffin,
E. Riis,
J. P. McGilligan
Abstract:
We demonstrate a controllable depletion of the nitrogen buffer gas pressure in a micro-machined cesium (Cs) vapor cell from the dynamic heating of an alkali dispenser pill. When the alkali source is laser activated, the gettering compounds within the alkali pill dispenser reduce the nitrogen (N$_2$) content from the vapor for fine-tuning of the alkali to buffer gas pressure ratio. Additionally, we…
▽ More
We demonstrate a controllable depletion of the nitrogen buffer gas pressure in a micro-machined cesium (Cs) vapor cell from the dynamic heating of an alkali dispenser pill. When the alkali source is laser activated, the gettering compounds within the alkali pill dispenser reduce the nitrogen (N$_2$) content from the vapor for fine-tuning of the alkali to buffer gas pressure ratio. Additionally, we decrease the buffer gas pressure below 100$\,$mTorr to evaluate the presence of other potential broadening mechanisms. Real-time control of the gas pressure ratio in the vapor cell will have notable benefits for refining atomic sensor performance and provide a routine to achieve various target pressures across a wafer bonded with a uniform back-filled buffer gas pressure.
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
A tuneable wavelength reference for chip-scale laser cooling
Authors:
S. Dyer,
K. Gallacher,
U. Hawley,
A. Bregazzi,
P. F. Griffin,
A. S. Arnold,
D. J. Paul,
E. Riis,
J. P. McGilligan
Abstract:
We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the l…
▽ More
We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the laser frequency stabilization system is evaluated and used in conjunction with an improved generation of chip-scale cold atom platforms that traps 4 million 87Rb atoms. The scalability and component consolidation provide a key step forward in the miniaturization of cold atom sensors.
△ Less
Submitted 6 December, 2022;
originally announced December 2022.
-
Cold-atom sha** with MEMS scanning mirrors
Authors:
Alan Bregazzi,
Paul Janin,
Sean Dyer,
James. P. McGilligan,
Oliver Burrow,
Erling Riis,
Deepak Uttamchandani,
Ralf Bauer,
Paul. F. Griffin
Abstract:
We demonstrate the integration of micro-electro-mechanical-systems (MEMS) scanning mirrors as active elements for the local optical pum** of ultra-cold atoms in a magneto-optical trap. A pair of MEMS mirrors steer a focused resonant beam through a cloud of trapped atoms shelved in the \textit{F}=1 ground-state of \textsuperscript{87}Rb for spatially-selective fluorescence of the atom cloud. Two-…
▽ More
We demonstrate the integration of micro-electro-mechanical-systems (MEMS) scanning mirrors as active elements for the local optical pum** of ultra-cold atoms in a magneto-optical trap. A pair of MEMS mirrors steer a focused resonant beam through a cloud of trapped atoms shelved in the \textit{F}=1 ground-state of \textsuperscript{87}Rb for spatially-selective fluorescence of the atom cloud. Two-dimensional control is demonstrated by forming geometrical patterns along the imaging axis of the cold atom ensemble. Such control of the atomic ensemble with a microfabricated mirror pair could find applications in single atom selection, local optical pum** and arbitrary cloud sha**. This approach has significant potential for miniaturisation and in creating portable control systems for quantum optic experiments.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Micro-machined deep silicon atomic vapor cells
Authors:
S. Dyer,
P. F. Griffin,
A. S. Arnold,
F. Mirando,
D. P. Burt,
E. Riis,
J. P. McGilligan
Abstract:
Using a simple and cost-effective water jet process, silicon etch depth limitations are overcome to realize a $6\,$mm deep atomic vapor cell. While the minimum silicon feature size was limited to a $1.5\,$mm width in these first generation vapor cells, we successfully demonstrate a two-chamber geometry by including a $\sim$25~mm meandering channel between the alkali pill chamber and main interroga…
▽ More
Using a simple and cost-effective water jet process, silicon etch depth limitations are overcome to realize a $6\,$mm deep atomic vapor cell. While the minimum silicon feature size was limited to a $1.5\,$mm width in these first generation vapor cells, we successfully demonstrate a two-chamber geometry by including a $\sim$25~mm meandering channel between the alkali pill chamber and main interrogation chamber. We evaluate the impact of the channel conductance on the introduction of alkali vapor density during the pill activation process, and mitigate glass damage and pill contamination near the main chamber. Finally, we highlight the improved signal achievable in the $6\,$mm silicon cell compared to standard $2\,$mm path length silicon vapor cells.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Quantum-correlated photon pairs generated in a commercial 45nm complementary metal-oxide semiconductor microelectronics chip
Authors:
Cale M. Gentry,
Jeffrey M. Shainline,
Mark T. Wade,
Martin J. Stevens,
Shellee D. Dyer,
Xiaoge Zeng,
Fabio Pavanello,
Thomas Gerrits,
Sae Woo Nam,
Richard P. Mirin,
Miloš A. Popović
Abstract:
Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronic…
▽ More
Correlated photon pairs are a fundamental building block of quantum photonic systems. While pair sources have previously been integrated on silicon chips built using customized photonics manufacturing processes, these often take advantage of only a small fraction of the established techniques for microelectronics fabrication and have yet to be integrated in a process which also supports electronics. Here we report the first demonstration of quantum-correlated photon pair generation in a device fabricated in an unmodified advanced (sub-100nm) complementary metal-oxide-semiconductor (CMOS) process, alongside millions of working transistors. The microring resonator photon pair source is formed in the transistor layer structure, with the resonator core formed by the silicon layer typically used for the transistor body. With ultra-low continuous-wave on-chip pump powers ranging from 5 $μ$W to 400 $μ$W, we demonstrate pair generation rates between 165 Hz and 332 kHz using >80% efficient WSi superconducting nanowire single photon detectors. Coincidences-to-accidentals ratios consistently exceeding 40 were measured with a maximum of 55. In the process of characterizing this source we also accurately predict pair generation rates from the results of classical four-wave mixing measurements. This proof-of-principle device demonstrates the potential of commercial CMOS microelectronics as an advanced quantum photonics platform with capability of large volume, pristine process control, and where state-of-the-art high-speed digital circuits could interact with quantum photonic circuits.
△ Less
Submitted 24 July, 2015; v1 submitted 4 July, 2015;
originally announced July 2015.
-
High-efficiency superconducting nanowire single-photon detectors fabricated from MoSi thin-films
Authors:
V. B. Verma,
B. Korzh,
F. Bussières,
R. D. Horansky,
S. D. Dyer,
A. E. Lita,
I. Vayshenker,
F. Marsili,
M. D. Shaw,
H. Zbinden,
R. P. Mirin,
S. W. Nam
Abstract:
We demonstrate high-efficiency superconducting nanowire single-photon detectors (SNSPDs) fabricated from MoSi thin-films. We measure a maximum system detection efficiency (SDE) of 87 +- 0.5 % at 1542 nm at a temperature of 0.7 K, with a jitter of 76 ps, maximum count rate approaching 10 MHz, and polarization dependence as low as 3.4 +- 0.7 % The SDE curves show saturation of the internal efficienc…
▽ More
We demonstrate high-efficiency superconducting nanowire single-photon detectors (SNSPDs) fabricated from MoSi thin-films. We measure a maximum system detection efficiency (SDE) of 87 +- 0.5 % at 1542 nm at a temperature of 0.7 K, with a jitter of 76 ps, maximum count rate approaching 10 MHz, and polarization dependence as low as 3.4 +- 0.7 % The SDE curves show saturation of the internal efficiency similar to WSi-based SNSPDs at temperatures as high as 2.3 K. We show that at similar cryogenic temperatures, MoSi SNSPDs achieve efficiencies comparable to WSi-based SNSPDs with nearly a factor of two reduction in jitter.
△ Less
Submitted 10 April, 2015;
originally announced April 2015.
-
Analysis of a distributed fiber-optic temperature sensor using single-photon detectors
Authors:
Shellee D. Dyer,
Michael G. Tanner,
Burm Baek,
Robert H. Hadfield,
Sae Woo Nam
Abstract:
We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard telecommunications wavelengths as the sensing fiber, which enables extremely low-loss experiments and compatibility with existing fiber networks. We show that the unce…
▽ More
We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard telecommunications wavelengths as the sensing fiber, which enables extremely low-loss experiments and compatibility with existing fiber networks. We show that the uncertainty of the temperature measurement decreases with longer integration periods, but is ultimately limited by the calibration uncertainty. Temperature uncertainty on the order of 3 K is possible with spatial resolution of the order of 1 cm and integration period as small as 60 seconds. Also, we show that the measurement is subject to systematic uncertainties, such as polarization fading, which can be reduced with a polarization diversity receiver.
△ Less
Submitted 17 November, 2011;
originally announced November 2011.
