-
Transport of topological defects in a biphasic mixture of active and passive nematic fluids
Authors:
KVS Chaithanya,
Aleksandra Ardaševa,
Oliver J. Meacock,
William M. Durham,
Sumesh P. Thampi,
Amin Doostmohammadi
Abstract:
Collectively moving cellular systems often contain a proportion of dead cells or non-motile genotypes. When mixed, nematically aligning motile and non-motile agents are known to segregate spontaneously. However, the role that topological defects and active stresses play in sha** the distribution of the two phases remains unresolved. In this study, we investigate the behaviour of a two-dimensiona…
▽ More
Collectively moving cellular systems often contain a proportion of dead cells or non-motile genotypes. When mixed, nematically aligning motile and non-motile agents are known to segregate spontaneously. However, the role that topological defects and active stresses play in sha** the distribution of the two phases remains unresolved. In this study, we investigate the behaviour of a two-dimensional binary mixture of active and passive nematic fluids to understand how topological defects are transported between the two phases and, ultimately, how this leads to the segregation of topological charges. When the activity of the motile phase is large, and the tension at the interface of motile and non-motile phases is weak, we find that the active phase tends to accumulate $+1/2$ defects and expel $-1/2$ defects so that the motile phase develops a net positive charge. Conversely, when the activity of the motile phase is comparatively small and interfacial tension is strong, the opposite occurs so that the active phase develops a net negative charge. We then use these simulations to develop a physical intuition of the underlying processes that drive the charge segregation. Lastly, we quantify the sensitivity of this process on the other model parameters, by exploring the effect that anchoring strength, orientational elasticity, friction, and volume fraction of the motile phase have on topological charge segregation. As $+1/2$ and $-1/2$ defects have very different effects on interface morphology and fluid transport, this study offers new insights into the spontaneous pattern formation that occurs when motile and non-motile cells interact.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Evidence of robust, universal conformal invariance in living biological matter
Authors:
Benjamin H. Andersen,
Francisco M. R. Safara,
Valeriia Grudtsyna,
Oliver J. Meacock,
Simon G. Andersen,
William M. Durham,
Nuno A. M. Araujo,
Amin Doostmohammadi
Abstract:
Collective cellular movement plays a crucial role in many processes fundamental to health, including development, reproduction, infection, wound healing, and cancer. The emergent dynamics that arise in these systems are typically thought to depend on how cells interact with one another and the mechanisms used to drive motility, both of which exhibit remarkable diversity across different biological…
▽ More
Collective cellular movement plays a crucial role in many processes fundamental to health, including development, reproduction, infection, wound healing, and cancer. The emergent dynamics that arise in these systems are typically thought to depend on how cells interact with one another and the mechanisms used to drive motility, both of which exhibit remarkable diversity across different biological systems. Here, we report experimental evidence of a universal feature in the patterns of flow that spontaneously emerges in groups of collectively moving cells. Specifically, we demonstrate that the flows generated by collectively moving dog kidney cells, human breast cancer cells, and by two different strains of pathogenic bacteria, all exhibit conformal invariance. Remarkably, not only do our results show that all of these very different systems display robust conformal invariance, but we also discovered that the precise form of the invariance in all four systems is described by the Schramm-Loewner Evolution (SLE), and belongs to the percolation universality class. A continuum model of active matter can recapitulate both the observed conformal invariance and SLE form found in experiments. The presence of universal conformal invariance reveals that the macroscopic features of living biological matter exhibit universal translational, rotational, and scale symmetries that are independent of the microscopic properties of its constituents. Our results show that the patterns of flows generated by diverse cellular systems are highly conserved and that biological systems can unexpectedly be used to experimentally test predictions from the theories for conformally invariant structures
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
Forward silicon tracking detector developments for the future Electron-Ion Collider
Authors:
Xuan Li,
Melynda Brooks,
Matt Durham,
Ming Liu,
Yasser Corrales Morales,
Kei Nagai,
Anton Navazo,
Christopher Prokop,
Eric Renner,
Walter Sondheim,
Cesar da Silva
Abstract:
The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy qu…
▽ More
The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy quark hadronization process in not well constrained kinematic regions. A high granularity and low material budget forward silicon tracker will enable precise forward heavy flavor measurements at the EIC, which have enhanced sensitivities to access these kinematic extremes. A Forward Silicon Tracker (FST) detector is under design and R$\&$D for the EIC. Two advanced silicon technologies, the Depleted Monolithic Active Pixel Sensor (DMAPS) and the AC coupled Low Gain Avalanche Diode (AC-LGAD), which can provide fine spatial and timing resolutions, have been considered as candidates for the EIC silicon tracking detector. Progresses and results about the FST conceptual design and ongoing DMAPS and LGAD detector R$\&$D will be presented. The path towards an integrated EIC detector will be discussed as well.
△ Less
Submitted 14 October, 2022; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 11 May, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will…
▽ More
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.
△ Less
Submitted 23 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Exclusive J/$ψ$ Detection and Physics with ECCE
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the…
▽ More
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider
Authors:
F. Bock,
N. Schmidt,
P. K. Wang,
N. Santiesteban,
T. Horn,
J. Huang,
J. Lajoie,
C. Munoz Camacho,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (263 additional authors not shown)
Abstract:
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key…
▽ More
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider
Authors:
C. Fanelli,
Z. Papandreou,
K. Suresh,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann
, et al. (258 additional authors not shown)
Abstract:
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to…
▽ More
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.
△ Less
Submitted 19 May, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider
Authors:
J. C. Bernauer,
C. T. Dean,
C. Fanelli,
J. Huang,
K. Kauder,
D. Lawrence,
J. D. Osborn,
C. Paus,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (256 additional authors not shown)
Abstract:
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes…
▽ More
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Steering self-organisation through confinement
Authors:
Nuno A. M. Araújo,
Liesbeth M. C. Janssen,
Thomas Barois,
Guido Boffetta,
Itai Cohen,
Alessandro Corbetta,
Olivier Dauchot,
Marjolein Dijkstra,
William M. Durham,
Audrey Dussutour,
Simon Garnier,
Hanneke Gelderblom,
Ramin Golestanian,
Lucio Isa,
Gijsje H. Koenderink,
Hartmut Löwen,
Ralf Metzler,
Marco Polin,
C. Patrick Royall,
Anđela Šarić,
Anupam Sengupta,
Cécile Sykes,
Vito Trianni,
Idan Tuval,
Nicolas Vogel
, et al. (4 additional authors not shown)
Abstract:
Self-organisation is the spontaneous emergence of spatio-temporal structures and patterns from the interaction of smaller individual units. Examples are found across many scales in very different systems and scientific disciplines, from physics, materials science and robotics to biology, geophysics and astronomy. Recent research has highlighted how self-organisation can be both mediated and contro…
▽ More
Self-organisation is the spontaneous emergence of spatio-temporal structures and patterns from the interaction of smaller individual units. Examples are found across many scales in very different systems and scientific disciplines, from physics, materials science and robotics to biology, geophysics and astronomy. Recent research has highlighted how self-organisation can be both mediated and controlled by confinement. Confinement occurs through interactions with boundaries, and can function as either a catalyst or inhibitor of self-organisation. It can then become a means to actively steer the emergence or suppression of collective phenomena in space and time. Here, to provide a common framework for future research, we examine the role of confinement in self-organisation and identify overarching scientific challenges across disciplines that need to be addressed to harness its full scientific and technological potential. This framework will not only accelerate the generation of a common deeper understanding of self-organisation but also trigger the development of innovative strategies to steer it through confinement, with impact, e.g., on the design of smarter materials, tissue engineering for biomedicine and crowd management.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider
Authors:
Xuan Li,
Melynda Brooks,
Matt Durham,
Yasser Corrales Morales,
Astrid Morreale,
Christopher Prokop,
Eric Renner,
Walter Sondheim
Abstract:
The proposed high-luminosity high-energy Electron-Ion Collider (EIC) will provide a clean environment to precisely study several fundamental questions in the fields of high-energy and nuclear physics . A low material budget and high granularity silicon vertex/tracking detector is critical to carry out a series of hadron and jet measurements at the future EIC especially for the heavy flavor product…
▽ More
The proposed high-luminosity high-energy Electron-Ion Collider (EIC) will provide a clean environment to precisely study several fundamental questions in the fields of high-energy and nuclear physics . A low material budget and high granularity silicon vertex/tracking detector is critical to carry out a series of hadron and jet measurements at the future EIC especially for the heavy flavor product reconstruction or tagging. The conceptual design of a proposed forward silicon tracking detector with the pseudorapidity coverage from 1.2 to 3.5 has been developed in integration with different magnet options and the other EIC detector sub-systems. The tracking performance of this detector enables precise heavy flavor hadron and jet measurements in the hadron beam going direction. The detector R$\&$D for the proposed silicon technology candidates: Low Gain Avalanche Diode (LGAD) and radiation hard depleted Monolithic Active Pixel Sensor (MALTA), which can provide good spatial and timing resolutions, is underway. Bench test results of the LGAD and MALTA prototype sensors will be discussed.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report
Authors:
R. Abdul Khalek,
A. Accardi,
J. Adam,
D. Adamiak,
W. Akers,
M. Albaladejo,
A. Al-bataineh,
M. G. Alexeev,
F. Ameli,
P. Antonioli,
N. Armesto,
W. R. Armstrong,
M. Arratia,
J. Arrington,
A. Asaturyan,
M. Asai,
E. C. Aschenauer,
S. Aune,
H. Avagyan,
C. Ayerbe Gayoso,
B. Azmoun,
A. Bacchetta,
M. D. Baker,
F. Barbosa,
L. Barion
, et al. (390 additional authors not shown)
Abstract:
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon…
▽ More
This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and develo** detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions.
This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter
△ Less
Submitted 26 October, 2021; v1 submitted 8 March, 2021;
originally announced March 2021.
-
International Workshop on Next Generation Gamma-Ray Source
Authors:
C. R. Howell,
M. W. Ahmed,
A. Afanasev,
D. Alesini,
J. R. M. Annand,
A. Aprahamian,
D. L. Balabanski,
S. V. Benson,
A. Bernstein,
C. R. Brune,
J. Byrd,
B. E. Carlsten,
A. E. Champagne,
S. Chattopadhyay,
D. Davis,
E. J. Downie,
M. J. Durham,
G. Feldman,
H. Gao,
C. G. R. Geddes,
H. W. Griesshammer,
R. Hajima,
H. Hao,
D. Hornidge,
J. Isaak
, et al. (28 additional authors not shown)
Abstract:
A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To an…
▽ More
A workshop on The Next Generation Gamma-Ray Sources sponsored by the Office of Nuclear Physics at the Department of Energy, was held November 17--19, 2016 in Bethesda, Maryland. The goals of the workshop were to identify basic and applied research opportunities at the frontiers of nuclear physics that would be made possible by the beam capabilities of an advanced laser Compton beam facility. To anchor the scientific vision to realistically achievable beam specifications using proven technologies, the workshop brought together experts in the fields of electron accelerators, lasers, and optics to examine the technical options for achieving the beam specifications required by the most compelling parts of the proposed research programs. An international assembly of participants included current and prospective $γ$-ray beam users, accelerator and light-source physicists, and federal agency program managers. Sessions were organized to foster interactions between the beam users and facility developers, allowing for information sharing and mutual feedback between the two groups. The workshop findings and recommendations are summarized in this whitepaper.
△ Less
Submitted 19 December, 2020;
originally announced December 2020.
-
Bacteria solve the problem of crowding by moving slowly
Authors:
Oliver J. Meacock,
Amin Doostmohammadi,
Kevin R. Foster,
Julia M. Yeomans,
William M. Durham
Abstract:
In systems as diverse as migrating mammals to road traffic, crowding acts to inhibit efficient collective movement. Bacteria, however, are observed to move in very dense groups containing billions of individuals without causing the gridlock common to other systems. Here we combine experiments, cell tracking and individual-based modelling to study the pathogen Pseudomonas aeruginosa as it collectiv…
▽ More
In systems as diverse as migrating mammals to road traffic, crowding acts to inhibit efficient collective movement. Bacteria, however, are observed to move in very dense groups containing billions of individuals without causing the gridlock common to other systems. Here we combine experiments, cell tracking and individual-based modelling to study the pathogen Pseudomonas aeruginosa as it collectively migrates across surfaces using grappling-hook like pili. We show that the fast moving cells of a hyperpilated mutant are overtaken and outcompeted by the slower moving wild-type at high cell densities. Using theory developed to study liquid crystals, we demonstrate that this effect is mediated by the physics of topological defects, points where cells with different orientations meet one another. Our analyses reveal that when comet-like defects collide with one another, the fast-moving mutant cells rotate vertically and become trapped. By moving more slowly, wild-type cells avoid this trap** mechanism, allowing them to collectively migrate faster. Our work suggests that the physics of liquid crystals has played a pivotal role in the evolution of collective bacterial motility by exerting a strong selection for cells that exercise restraint in their movement.
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
Verifying Spent Fuel Containers Before Deep Geological Storage with Cosmic Ray Muons
Authors:
D. Poulson,
J. M. Durham,
J. D. Bacon,
E. Guardincerri,
C. L. Morris
Abstract:
International nuclear safeguards inspectors do not have a method to verify the contents of sealed storage casks containing spent reactor fuel. The heavy shielding that is used to limit radiation emission attenuates and scatters photons and neutrons emitted by the fuel, and thereby hinders inspection with these probes. This problem is especially pressing given the policy decisions of several nation…
▽ More
International nuclear safeguards inspectors do not have a method to verify the contents of sealed storage casks containing spent reactor fuel. The heavy shielding that is used to limit radiation emission attenuates and scatters photons and neutrons emitted by the fuel, and thereby hinders inspection with these probes. This problem is especially pressing given the policy decisions of several nations to begin permanent disposal of spent fuel in deep geological repositories. Radiography with cosmic-ray muons provides a potential solution, as muons are able to penetrate the cask and fuel and provide information on the cask contents. Here we show in simulation that muon scattering radiography can be used to inspect the contents of sealed geological storage casks, and can discern between a variety of plausible diversion scenarios. This technique can be applied immediately prior to permanent interment in a geological repository, giving inspectors a final opportunity to verify State declarations of spent fuel disposal.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Cosmic Ray Muon Radiography Applications in Safeguards and Arms Control
Authors:
J. Matthew Durham
Abstract:
Muons are the most penetrating radiographic probe that exists today. These elementary particles possess a unique combination of physical properties that allows them to pass through dense, heavily shielded objects that are opaque to typical photon/neutron probes, and emerge with useful radiographic information on the object'sinternal substructure. Interactions of cosmic rays in the Earth's upper at…
▽ More
Muons are the most penetrating radiographic probe that exists today. These elementary particles possess a unique combination of physical properties that allows them to pass through dense, heavily shielded objects that are opaque to typical photon/neutron probes, and emerge with useful radiographic information on the object'sinternal substructure. Interactions of cosmic rays in the Earth's upper atmosphere provide a constant, natural source of muons that can be used for passive interrogation, eliminating the need for artificial sources of radiation. These proceedings discuss specific applications of muon radiography in nuclear safeguards and arms control treaty verification.
△ Less
Submitted 25 July, 2018;
originally announced August 2018.
-
3D Cosmic Ray Muon Tomography from an Underground Tunnel
Authors:
Elena Guardincerri,
Charlotte Rowe,
Emily Schultz-Fellenz,
Mousumi Roy,
Nicolas George,
Christopher Morris,
Jeffrey Bacon,
Matthew Durham,
Deborah Morley,
Kenie Plaud-Ramos,
Daniel Poulson,
Alain Bonneville,
Richard Kouzes
Abstract:
We present an underground cosmic ray muon tomographic experiment imaging 3D density of overburden, part of a joint study with differential gravity. Muon data were acquired at four locations within a tunnel beneath Los Alamos, New Mexico, and used in a 3D tomographic inversion to recover the spatial variation in the overlying rock-air interface, and compared with a priori knowledge of the topograph…
▽ More
We present an underground cosmic ray muon tomographic experiment imaging 3D density of overburden, part of a joint study with differential gravity. Muon data were acquired at four locations within a tunnel beneath Los Alamos, New Mexico, and used in a 3D tomographic inversion to recover the spatial variation in the overlying rock-air interface, and compared with a priori knowledge of the topography. Densities obtained exhibit good agreement with preliminary results of the gravity modeling, which will be presented elsewhere, and are compatible with values reported in the literature. The modeled rock-air interface matches that obtained from LIDAR within 4 m, our resolution, over much of the model volume. This experiment demonstrates the power of cosmic ray muons to image shallow geological targets using underground detectors, whose development as borehole devices will be an important new direction of passive geophysical imaging.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Verification of spent nuclear fuel in sealed dry storage casks via measurements of cosmic ray muon scattering
Authors:
J. M. Durham,
D. Poulson,
J. Bacon,
D. L. Chichester,
E. Guardincerri,
C. L. Morris,
K. Plaud-Ramos,
W. Schwendiman,
J. D. Tolman,
P. Winston
Abstract:
Most of the plutonium in the world resides inside spent nuclear reactor fuel rods. This high-level radioactive waste is commonly held in long-term storage within large, heavily shielded casks. Currently, international nuclear safeguards inspectors have no stand-alone method of verifying the amount of reactor fuel stored within a sealed cask. Here we demonstrate experimentally that measurements of…
▽ More
Most of the plutonium in the world resides inside spent nuclear reactor fuel rods. This high-level radioactive waste is commonly held in long-term storage within large, heavily shielded casks. Currently, international nuclear safeguards inspectors have no stand-alone method of verifying the amount of reactor fuel stored within a sealed cask. Here we demonstrate experimentally that measurements of the scattering angles of cosmic ray muons which pass through a storage cask can be used to determine if spent fuel assemblies are missing without opening the cask. This application of technology and methods commonly used in high-energy particle physics provides a potential solution to this long-standing problem in international nuclear safeguards.
△ Less
Submitted 13 March, 2018; v1 submitted 5 October, 2017;
originally announced October 2017.
-
Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks
Authors:
D. Poulson,
J. M. Durham,
E. Guardincerri,
C. L. Morris,
J. D. Bacon,
K. Plaud-Ramos,
D. Morley,
A. Hecht
Abstract:
Radiography with cosmic ray muon scattering has proven to be a successful method of imaging nuclear material through heavy shielding. Of particular interest is monitoring dry storage casks for diversion of plutonium contained in spent reactor fuel. Using muon tracking detectors that surround a cylindrical cask, cosmic ray muon scattering can be simultaneously measured from all azimuthal angles, gi…
▽ More
Radiography with cosmic ray muon scattering has proven to be a successful method of imaging nuclear material through heavy shielding. Of particular interest is monitoring dry storage casks for diversion of plutonium contained in spent reactor fuel. Using muon tracking detectors that surround a cylindrical cask, cosmic ray muon scattering can be simultaneously measured from all azimuthal angles, giving complete tomographic coverage of the cask interior. This paper describes the first application of filtered back projection algorithms, typically used in medical imaging, to cosmic ray muon imaging. The specific application to monitoring spent nuclear fuel in dry storage casks is investigated via GEANT4 simulations. With a cylindrical muon tracking detector surrounding a typical spent fuel cask, the cask contents can be confirmed with high confidence in less than two days exposure. Similar results can be obtained by moving a smaller detector to view the cask from multiple angles.
△ Less
Submitted 29 April, 2016;
originally announced April 2016.
-
Imaging the inside of thick structures using cosmic rays
Authors:
E. Guardincerri,
J. M. Durham,
C. Morris,
J. D. Bacon,
T. M. Daughton,
S. Fellows,
O. R. Johnson,
D. J. Morley,
K. Plaud-Ramos,
D. C. Poulson,
Z. Wang
Abstract:
The authors present here a new method to image reinforcement elements inside thick structures and the results of a demonstration measurement performed on a mock-up wall built at Los Alamos National Laboratory. The method, referred to as "multiple scattering muon radiography", relies on the use of cosmic-ray muons as probes. The work described in this article was performed to prove the viability of…
▽ More
The authors present here a new method to image reinforcement elements inside thick structures and the results of a demonstration measurement performed on a mock-up wall built at Los Alamos National Laboratory. The method, referred to as "multiple scattering muon radiography", relies on the use of cosmic-ray muons as probes. The work described in this article was performed to prove the viability of the technique as a means to image the interior of the dome of Florence Cathedral Santa Maria del Fiore, one of the UNESCO World Heritage sites and among the highest profile buildings in existence. Its result shows the effectiveness of the technique as a tool to radiograph thick structures and image denser object inside them.
△ Less
Submitted 6 January, 2016;
originally announced January 2016.
-
Tests of cosmic ray radiography for power industry applications
Authors:
J. M. Durham,
E. Guardincerri,
C. L. Morris,
J. Bacon,
J. Fabritius,
S. Fellows,
K. Plaud-Ramos,
D. Poulson,
J. Renshaw
Abstract:
In this report, we assess muon multiple scattering tomography as a non-destructive inspection technique in several typical areas of interest to the nuclear power industry, including monitoring concrete degradation, gate valve conditions, and pipe wall thickness. This work is motivated by the need for radiographic methods that do not require the licensing, training, and safety controls of x-rays, a…
▽ More
In this report, we assess muon multiple scattering tomography as a non-destructive inspection technique in several typical areas of interest to the nuclear power industry, including monitoring concrete degradation, gate valve conditions, and pipe wall thickness. This work is motivated by the need for radiographic methods that do not require the licensing, training, and safety controls of x-rays, and by the need to be able to penetrate considerable overburden to examine internal details of components that are otherwise inaccessible, with minimum impact on industrial operations. In some scenarios, we find that muon tomography may be an attractive alternative to more typical measurements.
△ Less
Submitted 25 March, 2015;
originally announced March 2015.
-
Detecting Special Nuclear Material Using Muon-Induced Neutron Emission
Authors:
E. Guardincerri,
J. D. Bacon,
K. Borodzin,
J. M. Durham,
J. M. Fabritius II,
A. Hecht,
E. C. Milner,
H. Miyadera,
C. L. Morris,
J. O. Perry,
D. Poulson
Abstract:
The penetrating ability of cosmic ray muons makes them an attractive probe for imaging dense materials. Here, we describe experimental results from a new technique that uses neutrons generated by cosmic-ray muons to identify the presence of special nuclear material (SNM). Neutrons emitted from SNM are used to tag muon-induced fission events in actinides and laminography is used to form images of t…
▽ More
The penetrating ability of cosmic ray muons makes them an attractive probe for imaging dense materials. Here, we describe experimental results from a new technique that uses neutrons generated by cosmic-ray muons to identify the presence of special nuclear material (SNM). Neutrons emitted from SNM are used to tag muon-induced fission events in actinides and laminography is used to form images of the stop** material. This technique allows the imaging of SNM-bearing objects tagged using muon tracking detectors located above or to the side of the objects, and may have potential applications in warhead verification scenarios. During the experiment described here we did not attempt to distinguish the type or grade of the SNM.
△ Less
Submitted 25 March, 2015; v1 submitted 4 June, 2014;
originally announced June 2014.
-
The PHENIX Forward Silicon Vertex Detector
Authors:
C. Aidala,
L. Anaya,
E. Anderssen,
A. Bambaugh,
A. Barron,
J. G. Boissevain,
J. Bok,
S. Boose,
M. L. Brooks,
S. Butsyk,
M. Cepeda,
P. Chacon,
S. Chacon,
L. Chavez,
T. Cote,
C. D'Agostino,
A. Datta,
K. DeBlasio,
L. DelMonte,
E. J. Desmond,
J. M. Durham,
D. Fields,
M. Finger,
C. Gingu,
B. Gonzales
, et al. (60 additional authors not shown)
Abstract:
A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a…
▽ More
A new silicon detector has been developed to provide the PHENIX experiment with precise charged particle tracking at forward and backward rapidity. The Forward Silicon Vertex Tracker (FVTX) was installed in PHENIX prior to the 2012 run period of the Relativistic Heavy Ion Collider (RHIC). The FVTX is composed of two annular endcaps, each with four stations of silicon mini-strip sensors, covering a rapidity range of $1.2<|η|<2.2$ that closely matches the two existing PHENIX muon arms. Each station consists of 48 individual silicon sensors, each of which contains two columns of mini-strips with 75 $μ$m pitch in the radial direction and lengths in the $φ$ direction varying from 3.4 mm at the inner radius to 11.5 mm at the outer radius. The FVTX has approximately 0.54 million strips in each endcap. These are read out with FPHX chips, developed in collaboration with Fermilab, which are wire bonded directly to the mini-strips. The maximum strip occupancy reached in central Au-Au collisions is approximately 2.8%. The precision tracking provided by this device makes the identification of muons from secondary vertices away from the primary event vertex possible. The expected distance of closest approach (DCA) resolution of 200 $μ$m or better for particles with a transverse momentum of 5 GeV/$c$ will allow identification of muons from relatively long-lived particles, such as $D$ and $B$ mesons, through their broader DCA distributions.
△ Less
Submitted 14 February, 2014; v1 submitted 14 November, 2013;
originally announced November 2013.
-
Turbulent fluid acceleration generates clusters of gyrotactic microorganisms
Authors:
Filippo De Lillo,
Massimo Cencini,
William M. Durham,
Michael Barry,
Roman Stocker,
Eric Climent,
Guido Boffetta
Abstract:
The motility of microorganisms is often biased by gradients in physical and chemical properties of their environment, with myriad implications on their ecology. Here we show that fluid acceleration reorients gyrotactic plankton, triggering small-scale clustering. We experimentally demonstrate this phenomenon by studying the distribution of the phytoplankton Chlamydomonas augustae within a rotating…
▽ More
The motility of microorganisms is often biased by gradients in physical and chemical properties of their environment, with myriad implications on their ecology. Here we show that fluid acceleration reorients gyrotactic plankton, triggering small-scale clustering. We experimentally demonstrate this phenomenon by studying the distribution of the phytoplankton Chlamydomonas augustae within a rotating tank and find it to be in good agreement with a new, generalized model of gyrotaxis. When this model is implemented in a direct numerical simulation of turbulent flow, we find that fluid acceleration generates multi-fractal plankton clustering, with faster and more stable cells producing stronger clustering. By producing accumulations in high-vorticity regions, this process is fundamen- tally different from clustering by gravitational acceleration, expanding the range of mechanisms by which turbulent flows can impact the spatial distribution of active suspensions.
△ Less
Submitted 4 October, 2013;
originally announced October 2013.
-
Design, Construction, Operation and Performance of a Hadron Blind Detector for the PHENIX Experiment
Authors:
W. Anderson,
B. Azmoun,
A. Cherlin,
C. Y. Chi,
Z. Citron,
M. Connors,
A. Dubey,
J. M. Durham,
Z. Fraenkel,
T. Hemmick,
J. Kamin,
A. Kozlov,
B. Lewis,
M. Makek,
A. Milov,
M. Naglis,
V. Pantuev,
R. Pisani,
M. Proissl,
I. Ravinovich,
S. Rolnick,
T. Sakaguchi,
D. Sharma,
S. Stoll,
J. Sun
, et al. (2 additional authors not shown)
Abstract:
A Hadron Blind Detector (HBD) has been developed, constructed and successfully operated within the PHENIX detector at RHIC. The HBD is a Cherenkov detector operated with pure CF4. It has a 50 cm long radiator directly coupled in a window- less configuration to a readout element consisting of a triple GEM stack, with a CsI photocathode evaporated on the top surface of the top GEM and pad readout at…
▽ More
A Hadron Blind Detector (HBD) has been developed, constructed and successfully operated within the PHENIX detector at RHIC. The HBD is a Cherenkov detector operated with pure CF4. It has a 50 cm long radiator directly coupled in a window- less configuration to a readout element consisting of a triple GEM stack, with a CsI photocathode evaporated on the top surface of the top GEM and pad readout at the bottom of the stack. This paper gives a comprehensive account of the construction, operation and in-beam performance of the detector.
△ Less
Submitted 22 March, 2011;
originally announced March 2011.
-
Construction and Expected Performance of the Hadron Blind Detector for the PHENIX Experiment at RHIC
Authors:
A Milov,
W Anderson,
B Azmoun,
C-Y Chi,
A Drees,
A Dubey,
M Durham,
Z Fraenkel,
J Harder,
T Hemmick,
R Hutter,
B Jacak,
J Kamin,
A Kozlov,
M Naglis,
P O'Connor,
R Pisani,
V Radeka,
I Ravinovich,
T Sakaguchi,
D Sharma,
A Sickles,
S Stoll,
I Tserruya,
B Yu
, et al. (1 additional authors not shown)
Abstract:
A new Hadron Blind Detector (HBD) for electron identification in high density hadron environment has been installed in the PHENIX detector at RHIC in the fall of 2006. The HBD will identify low momentum electron-positron pairs to reduce the combinatorial background in the $e^{+}e^{-}$ mass spectrum, mainly in the low-mass region below 1 GeV/c$^{2}$. The HBD is a windowless proximity-focusing Che…
▽ More
A new Hadron Blind Detector (HBD) for electron identification in high density hadron environment has been installed in the PHENIX detector at RHIC in the fall of 2006. The HBD will identify low momentum electron-positron pairs to reduce the combinatorial background in the $e^{+}e^{-}$ mass spectrum, mainly in the low-mass region below 1 GeV/c$^{2}$. The HBD is a windowless proximity-focusing Cherenkov detector with a radiator length of 50 cm, a CsI photocathode and three layers of Gas Electron Multipliers (GEM). The HBD uses pure CF$_{4}$ as a radiator and a detector gas. Construction details and the expected performance of the detector are described.
△ Less
Submitted 23 January, 2007;
originally announced January 2007.
