-
Helium Detection in Technical Materials
Authors:
Andrew K. Gillespie,
Cuikun Lin,
Django Jones,
R. V. Duncan
Abstract:
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of helium is often cited as the primary evidence that a nuclear reaction has occurred, so it is imperative that known sources of helium are mitigated prior to procee…
▽ More
Materials used to study nuclear fusion can retain atmospheric helium unless pretreated before an experiment. Understanding helium outgassing is important for accurate diagnostics in experiments surrounding nuclear fusion. The presence of helium is often cited as the primary evidence that a nuclear reaction has occurred, so it is imperative that known sources of helium are mitigated prior to proceeding with novel nuclear experiments. It is also necessary to ensure hermiticity when transferring gas aliquots from an experiment to a mass spectrometer. In this article, we present studies of detecting helium leak rates in systems used in novel nuclear experiments. We also present studies of helium retention in materials subjected to various heating profiles and atmospheric concentrations. Without pretreatment, stainless-steel 316 retains between 15 $\unicode{x2013}$ 240 pmol of $^{ 4}$He or an areal outgassing amount of 0.07 $\unicode{x2013}$ 1.20 pmol/$cm^{ 2}$. It also may reabsorb $^{ 4}$He from the atmosphere in time. These studies also demonstrate that it is necessary to pretreat most materials prior to performing experiments where the presence of $^{ 4}$He is being used as an indicator for novel nuclear reactions.
△ Less
Submitted 25 March, 2024;
originally announced May 2024.
-
Simulation and Experimental Analysis of Aerogel Attenuation for High Energy Alpha Particles in Fission Fusion Fragment Rocket Applications
Authors:
Sandeep Puri,
Andrew Gillespie,
Ian Jones,
Cuikun Lin,
Ryan Weed,
Robert V. Duncan
Abstract:
Emerging studies are geared toward exploring new methods of nuclear rocket propulsion to provide more efficient space transit beyond Earth's orbit. One method is to employ a Fission Fragment Rocket Engine utilizing fissionable layers embedded in a low-density aerogel. A quantitative understanding of particle attenuation is essential for develo** a functional prototype that permits fission fragme…
▽ More
Emerging studies are geared toward exploring new methods of nuclear rocket propulsion to provide more efficient space transit beyond Earth's orbit. One method is to employ a Fission Fragment Rocket Engine utilizing fissionable layers embedded in a low-density aerogel. A quantitative understanding of particle attenuation is essential for develo** a functional prototype that permits fission fragments to escape the layers and contribute to specific impulse rather than being attenuated and generating waste heat. In this investigation, the MCNP code was used to theoretically analyze the attenuation of alpha particles from Am-241 sources within aerogel materials. Simulations were conducted on aerogels with various densities and compositions. These simulations aimed to predict the expected intensity of alpha particles reaching a detector. CR-39 was employed as a Plastic Nuclear Track Detector to assess particle attenuation by the aerogels. The threshold areal density of atoms was found to be around $10^{ 20}$ atoms/$cm^{ 2}$ for the three materials studied in this project. Using a 0.22 mm thick SiO$_2$ aerogel with a density of 90 mg/$cm^{ 3}$, which exceeds the threshold, nearly all alpha particles were attenuated. Conversely, employing a 1.6 mm thick graphene aerogel with a density of 12.5 mg/$cm^{ 3}$ resulted in an average attenuation of 32.3%.
△ Less
Submitted 28 May, 2024; v1 submitted 31 January, 2024;
originally announced February 2024.
-
Simulating Radiation Shielding Effectiveness Against Three Neutron Sources
Authors:
Andrew K. Gillespie,
Cuikun Lin,
Matthew Looney,
R. V. Duncan
Abstract:
Laboratories and Universities regularly apply for approval from the United States Nuclear Regulatory Commission (NRC) to use neutron generators for experimental research. To comply with the regulations set by the NRC, adequate shielding is necessary to ensure that the radiation dose rates experienced by an operator, and outside the walls of any containment buildings, are below the prescribed level…
▽ More
Laboratories and Universities regularly apply for approval from the United States Nuclear Regulatory Commission (NRC) to use neutron generators for experimental research. To comply with the regulations set by the NRC, adequate shielding is necessary to ensure that the radiation dose rates experienced by an operator, and outside the walls of any containment buildings, are below the prescribed levels. Typically, the neutron source needs to be shielded such that the radiation dose rate experienced by any user is less than 0.25 mRem/hr (500mrem/2000-hour work-year). To address this requirement, we investigate the effectiveness of boronated concrete, boronated water, and light water shielding materials and their applicability to three neutron sources. We present our findings on the radiation shielding design and calculations for three neutron sources situated inside shielding layers. Our modeling utilized the Monte Carlo n-Particle transport codes (MCNP6.2) to simulate neutron attenuation of the shielding. The simulation results reveal that a light water shielding can sufficiently reduce the dose rate for an individual located as close as two meters from the source. Therefore, this shield design can effectively decrease the radiation dose below the maximum recommended limit.
△ Less
Submitted 31 January, 2024; v1 submitted 19 September, 2023;
originally announced September 2023.
-
Photoneutron Yield for an Electron Beam on Tantalum and Erbium Deuteride
Authors:
Andrew K. Gillespie,
Cuikun Lin,
R. V. Duncan
Abstract:
An electron beam may be used to generate bremsstrahlung photons that go on to create photoneutrons within metals. This serves as a low-energy neutron source for irradiation experiments [1-3]. In this article, we present simulation results for optimizing photoneutron yield for a 10-MeV electron beam on tantalum foil and erbium deuteride (ErD$_3$). The thickness of the metal layers was varied. A tan…
▽ More
An electron beam may be used to generate bremsstrahlung photons that go on to create photoneutrons within metals. This serves as a low-energy neutron source for irradiation experiments [1-3]. In this article, we present simulation results for optimizing photoneutron yield for a 10-MeV electron beam on tantalum foil and erbium deuteride (ErD$_3$). The thickness of the metal layers was varied. A tantalum foil thickness of 1.5 mm resulted in the most photons reaching the second metal layer. When a second metal layer of ErD$_3$ was included, the photoneutron yield increased with the thickness of the secondary layer. When the electron beam was directly incident upon a layer of ErD$_3$, the photoneutron yield did not differ significantly from the yield when a layer of tantalum was included. The directional photoneutron yield reached a maximum level when the thickness of the ErD$_3$ layer was around 12 cm. About 1 neutron was generated per $10^4$ source electrons. When using a 2-mA beam current, it is possible to generate up to $10^{ 12}$ neutrons per second, making this combination a relatively-inexpensive neutron generator.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
The Fission Fragment Rocket Engine for Mars Fast Transit
Authors:
John Gahl,
Andrew K. Gillespie,
Cuikun Lin,
R. V. Duncan
Abstract:
In this paper we discuss the advantages and challenges of utilizing Fission Fragment Rocket Engines (FFREs) to dramatically reduce transit time in space travel, for example, traveling to Mars. We discuss methods to decrease the size and weight of FFREs. These include utilizing metallic deuterides as moderators, driving the engines with electron beam bremsstrahlung, and operating the FFREs as subcr…
▽ More
In this paper we discuss the advantages and challenges of utilizing Fission Fragment Rocket Engines (FFREs) to dramatically reduce transit time in space travel, for example, traveling to Mars. We discuss methods to decrease the size and weight of FFREs. These include utilizing metallic deuterides as moderators, driving the engines with electron beam bremsstrahlung, and operating the FFREs as subcritical assemblies, not as nuclear reactors. We discuss these and other new innovations based upon improved materials and technology that may be integrated into a revolutionary nuclear rocket technology.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Prospects For A New Light Nuclei, Fission Fusion Energy Cycle
Authors:
R. V. Duncan,
Cuikun Lin,
Andrew K. Gillespie,
John Gahl
Abstract:
Future advanced nuclear rocket propulsion, and the availability of new nuclear power cycle designs, will benefit substantially from the large current investment in alternative nuclear energy that is underway today. We propose a new nuclear cycle which includes the primary fission of lithium-6, followed by secondary fusion of deuterium and tritium, and a secondary fission of lithium-7 by tritium. T…
▽ More
Future advanced nuclear rocket propulsion, and the availability of new nuclear power cycle designs, will benefit substantially from the large current investment in alternative nuclear energy that is underway today. We propose a new nuclear cycle which includes the primary fission of lithium-6, followed by secondary fusion of deuterium and tritium, and a secondary fission of lithium-7 by tritium. This cycle does not produce nuclear waste from its nuclear fuel, since all byproducts of these cascade reactions are stable, provided that the triton production during the primary reaction is fully consumed in the secondary reactions. This cycle may, however, activate surrounding technical materials from its neutron flux. This light-element nuclear fuel is readily obtained through the ongoing expansion of the lithium mining industry and electric vehicle (EV) battery recycling industries.
△ Less
Submitted 22 March, 2024; v1 submitted 2 August, 2023;
originally announced August 2023.
