-
Enhancing Membrane-Based Scanning Force Microscopy Through an Optical Cavity
Authors:
Thomas Gisler,
David Hälg,
Vincent Dumont,
Shobhna Misra,
Letizia Catalini,
Eric C. Langman,
Albert Schliesser,
Christian L. Degen,
Alexander Eichler
Abstract:
The new generation of strained silicon nitride resonators harbors great promise for scanning force microscopy, especially when combined with the extensive toolbox of cavity optomechanics. However, accessing a mechanical resonator inside an optical cavity with a scanning tip is challenging. Here, we experimentally demonstrate a cavity-based scanning force microscope based on a silicon nitride membr…
▽ More
The new generation of strained silicon nitride resonators harbors great promise for scanning force microscopy, especially when combined with the extensive toolbox of cavity optomechanics. However, accessing a mechanical resonator inside an optical cavity with a scanning tip is challenging. Here, we experimentally demonstrate a cavity-based scanning force microscope based on a silicon nitride membrane sensor. We overcome geometric constraints by making use of the extended nature of the mechanical resonator normal modes, which allows us to spatially separate the scanning and readout sites of the membrane. Our microscope is geared towards low-temperature applications in the zeptonewton regime, such as nanoscale nuclear spin detection and imaging.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
An optically defined phononic crystal defect
Authors:
Thomas J. Clark,
Simon Bernard,
Jiaxing Ma,
Vincent Dumont,
Jack C. Sankey
Abstract:
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanica…
▽ More
We demonstrate a mechanical crystal with an optically programmable defect mode. By applying an optical spring to a single unit cell of a phononic crystal membrane, we smoothly transfer a single mechanical mode into the bandgap, thereby localizing its spatial profile from one spanning the entire crystal to one confined within a few unit cells. This localization is evidenced by an enhanced mechanical frequency shift commensurate with a 37-fold reduction in the mode's participating mass. Our results lay groundwork for a new class of optomechanical systems that control mechanical mode profile and participating mass.
△ Less
Submitted 28 June, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
High-Power Quantum-Limited Photodiode and Classical Laser Noise Squashing
Authors:
Vincent Dumont,
Jiaxing Ma,
Eamon Eagan,
Jack C. Sankey
Abstract:
To benefit high-power interferometry and the creation of low-noise light sources, we develop a simple lead-compensated photodetector enabling quantum-limited readout from 0.3 mW to 10 mW and 10 k$Ω$ transimpedance gain from 85 Hz - 35 MHz. Feeding the detector output back to an intensity modulator, we squash the classical amplitude noise of a commercial 1550 nm fiber laser to the shot noise limit…
▽ More
To benefit high-power interferometry and the creation of low-noise light sources, we develop a simple lead-compensated photodetector enabling quantum-limited readout from 0.3 mW to 10 mW and 10 k$Ω$ transimpedance gain from 85 Hz - 35 MHz. Feeding the detector output back to an intensity modulator, we squash the classical amplitude noise of a commercial 1550 nm fiber laser to the shot noise limit over a bandwidth of 700 Hz - 200 kHz, observing no degradation to its (nominally ~100 Hz) linewidth.
△ Less
Submitted 4 August, 2023;
originally announced August 2023.
-
A Self-Supervised Approach to Reconstruction in Sparse X-Ray Computed Tomography
Authors:
Rey Mendoza,
Minh Nguyen,
Judith Weng Zhu,
Vincent Dumont,
Talita Perciano,
Juliane Mueller,
Vidya Ganapati
Abstract:
Computed tomography has propelled scientific advances in fields from biology to materials science. This technology allows for the elucidation of 3-dimensional internal structure by the attenuation of x-rays through an object at different rotations relative to the beam. By imaging 2-dimensional projections, a 3-dimensional object can be reconstructed through a computational algorithm. Imaging at a…
▽ More
Computed tomography has propelled scientific advances in fields from biology to materials science. This technology allows for the elucidation of 3-dimensional internal structure by the attenuation of x-rays through an object at different rotations relative to the beam. By imaging 2-dimensional projections, a 3-dimensional object can be reconstructed through a computational algorithm. Imaging at a greater number of rotation angles allows for improved reconstruction. However, taking more measurements increases the x-ray dose and may cause sample damage. Deep neural networks have been used to transform sparse 2-D projection measurements to a 3-D reconstruction by training on a dataset of known similar objects. However, obtaining high-quality object reconstructions for the training dataset requires high x-ray dose measurements that can destroy or alter the specimen before imaging is complete. This becomes a chicken-and-egg problem: high-quality reconstructions cannot be generated without deep learning, and the deep neural network cannot be learned without the reconstructions. This work develops and validates a self-supervised probabilistic deep learning technique, the physics-informed variational autoencoder, to solve this problem. A dataset consisting solely of sparse projection measurements from each object is used to jointly reconstruct all objects of the set. This approach has the potential to allow visualization of fragile samples with x-ray computed tomography. We release our code for reproducing our results at: https://github.com/vganapati/CT_PVAE .
△ Less
Submitted 29 October, 2022;
originally announced November 2022.
-
Hyperparameter Optimization of Generative Adversarial Network Models for High-Energy Physics Simulations
Authors:
Vincent Dumont,
Xiangyang Ju,
Juliane Mueller
Abstract:
The Generative Adversarial Network (GAN) is a powerful and flexible tool that can generate high-fidelity synthesized data by learning. It has seen many applications in simulating events in High Energy Physics (HEP), including simulating detector responses and physics events. However, training GANs is notoriously hard and optimizing their hyperparameters even more so. It normally requires many tria…
▽ More
The Generative Adversarial Network (GAN) is a powerful and flexible tool that can generate high-fidelity synthesized data by learning. It has seen many applications in simulating events in High Energy Physics (HEP), including simulating detector responses and physics events. However, training GANs is notoriously hard and optimizing their hyperparameters even more so. It normally requires many trial-and-error training attempts to force a stable training and reach a reasonable fidelity. Significant tuning work has to be done to achieve the accuracy required by physics analyses. This work uses the physics-agnostic and high-performance-computer-friendly hyperparameter optimization tool HYPPO to optimize and examine the sensitivities of the hyperparameters of a GAN for two independent HEP datasets. This work provides the first insights into efficiently tuning GANs for Large Hadron Collider data. We show that given proper hyperparameter tuning, we can find GANs that provide high-quality approximations of the desired quantities. We also provide guidelines for how to go about GAN architecture tuning using the analysis tools in HYPPO.
△ Less
Submitted 21 October, 2022; v1 submitted 12 August, 2022;
originally announced August 2022.
-
Asymmetry-Based Quantum Backaction Suppression in Quadratic Optomechanics
Authors:
Vincent Dumont,
Hoi-Kwan Lau,
Aashish A. Clerk,
Jack C. Sankey
Abstract:
As the field of optomechanics advances, quadratic dispersive coupling (QDC) promise an increasingly feasible class of qualitatively new functionality. However, the leading QDC geometries also generate linear dissipative coupling, and an associated quantum radiation force noise that is detrimental to QDC applications. Here, we propose a simple modification that dramatically reduces this noise witho…
▽ More
As the field of optomechanics advances, quadratic dispersive coupling (QDC) promise an increasingly feasible class of qualitatively new functionality. However, the leading QDC geometries also generate linear dissipative coupling, and an associated quantum radiation force noise that is detrimental to QDC applications. Here, we propose a simple modification that dramatically reduces this noise without altering the QDC strength. We identify optimal regimes of operation, and discuss advantages within the examples of optical levitation and nondestructive phonon measurement.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Do cities have a unique magnetic pulse?
Authors:
Vincent Dumont,
Trevor A. Bowen,
Roger Roglans,
Gregory Dobler,
Mohit S. Sharma,
Andy Karpf,
Stuart D. Bale,
Arne Wickenbrock,
Elena Zhivun,
Tom Kornack,
Jonathan S. Wurtele,
Dmitry Budker
Abstract:
We present a comparative analysis of urban magnetic fields between two American cities: Berkeley (California) and Brooklyn Borough of New York City (New York). Our analysis uses data taken over a four-week period during which magnetic field data were continuously recorded using a fluxgate magnetometer of 70 pT/$\sqrt{\mathrm{Hz}}$ sensitivity. We identified significant differences in the magnetic…
▽ More
We present a comparative analysis of urban magnetic fields between two American cities: Berkeley (California) and Brooklyn Borough of New York City (New York). Our analysis uses data taken over a four-week period during which magnetic field data were continuously recorded using a fluxgate magnetometer of 70 pT/$\sqrt{\mathrm{Hz}}$ sensitivity. We identified significant differences in the magnetic signatures. In particular, we noticed that Berkeley reaches a near-zero magnetic field activity at night whereas magnetic activity in Brooklyn continues during nighttime. We also present auxiliary measurements acquired using magnetoresistive vector magnetometers (VMR), with sensitivity of 300 pT/$\sqrt{\mathrm{Hz}}$, and demonstrate how cross-correlation, and frequency-domain analysis, combined with data filtering can be used to extract urban magnetometry signals and study local anthropogenic activities. Finally, we discuss the potential of using magnetometer networks to characterize the global magnetic field of cities and give directions for future development.
△ Less
Submitted 12 February, 2022;
originally announced February 2022.
-
Cavity-enhanced absorption sensing with robust sideband locking
Authors:
Fernanda C. Rodrigues-Machado,
Pauline Pestre,
Vincent Dumont,
Erika Janitz,
Liam Scanlon,
Shirin A. Enger,
Lilian Childress,
Jack Sankey
Abstract:
We present a simple, continuous, cavity-enhanced optical absorption measurement technique based on high-bandwidth Pound-Drever-Hall (PDH) sideband locking. The technique provides a resonant amplitude quadrature readout that can be mapped onto the cavity's internal loss rate, and is naturally compatible with weak probe beams. With a proof-of-concept 5-cm-long Fabry-Perot cavity, we measure an absor…
▽ More
We present a simple, continuous, cavity-enhanced optical absorption measurement technique based on high-bandwidth Pound-Drever-Hall (PDH) sideband locking. The technique provides a resonant amplitude quadrature readout that can be mapped onto the cavity's internal loss rate, and is naturally compatible with weak probe beams. With a proof-of-concept 5-cm-long Fabry-Perot cavity, we measure an absorption sensitivity of $6.6 \times 10^{-11} ~\text{cm}^{-1}/\sqrt{\text{Hz}}$ at 100 kHz (roughly the cavity bandwidth) and $\sim 10^{-10}~\text{cm}^{-1}/\sqrt{\text{Hz}}$ from 30 kHz to 1 MHz, with $38~μ$W collected from the cavity's circulating power.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
Search for topological defect dark matter with a global network of optical magnetometers
Authors:
Samer Afach,
Ben C. Buchler,
Dmitry Budker,
Conner Dailey,
Andrei Derevianko,
Vincent Dumont,
Nataniel L. Figueroa,
Ilja Gerhardt,
Zoran D. Grujić,
Hong Guo,
Chuanpeng Hao,
Paul S. Hamilton,
Morgan Hedges,
Derek F. Jackson Kimball,
Dongok Kim,
Sami Khamis,
Thomas Kornack,
Victor Lebedev,
Zheng-Tian Lu,
Hector Masia-Roig,
Madeline Monroy,
Mikhail Padniuk,
Christopher A. Palm,
Sun Yool Park,
Karun V. Paul
, et al. (24 additional authors not shown)
Abstract:
Ultralight bosons such as axion-like particles are viable candidates for dark matter. They can form stable, macroscopic field configurations in the form of topological defects that could concentrate the dark matter density into many distinct, compact spatial regions that are small compared to the galaxy but much larger than the Earth. Here, we report the results of a search for transient signals f…
▽ More
Ultralight bosons such as axion-like particles are viable candidates for dark matter. They can form stable, macroscopic field configurations in the form of topological defects that could concentrate the dark matter density into many distinct, compact spatial regions that are small compared to the galaxy but much larger than the Earth. Here, we report the results of a search for transient signals from axion-like particle domain walls with the Global Network of Optical Magnetometers for Exotic physics searches (GNOME). We search the data, consisting of correlated measurements from optical atomic magnetometers located in laboratories all over the world, for patterns of signals propagating through the network consistent with domain walls. The analysis of data from a continuous month-long operation of the GNOME finds no statistically significant signals, thus placing experimental constraints on such dark matter scenarios.
△ Less
Submitted 7 December, 2021; v1 submitted 26 February, 2021;
originally announced February 2021.
-
Deep Learning for Surface Wave Identification in Distributed Acoustic Sensing Data
Authors:
Vincent Dumont,
Verónica Rodríguez Tribaldos,
Jonathan Ajo-Franklin,
Kesheng Wu
Abstract:
Moving loads such as cars and trains are very useful sources of seismic waves, which can be analyzed to retrieve information on the seismic velocity of subsurface materials using the techniques of ambient noise seismology. This information is valuable for a variety of applications such as geotechnical characterization of the near-surface, seismic hazard evaluation, and groundwater monitoring. Howe…
▽ More
Moving loads such as cars and trains are very useful sources of seismic waves, which can be analyzed to retrieve information on the seismic velocity of subsurface materials using the techniques of ambient noise seismology. This information is valuable for a variety of applications such as geotechnical characterization of the near-surface, seismic hazard evaluation, and groundwater monitoring. However, for such processes to converge quickly, data segments with appropriate noise energy should be selected. Distributed Acoustic Sensing (DAS) is a novel sensing technique that enables acquisition of these data at very high spatial and temporal resolution for tens of kilometers. One major challenge when utilizing the DAS technology is the large volume of data that is produced, thereby presenting a significant Big Data challenge to find regions of useful energy. In this work, we present a highly scalable and efficient approach to process real, complex DAS data by integrating physics knowledge acquired during a data exploration phase followed by deep supervised learning to identify "useful" coherent surface waves generated by anthropogenic activity, a class of seismic waves that is abundant on these recordings and is useful for geophysical imaging. Data exploration and training were done on 130~Gigabytes (GB) of DAS measurements. Using parallel computing, we were able to do inference on an additional 170~GB of data (or the equivalent of 10 days' worth of recordings) in less than 30 minutes. Our method provides interpretable patterns describing the interaction of ground-based human activities with the buried sensors.
△ Less
Submitted 27 April, 2021; v1 submitted 15 October, 2020;
originally announced October 2020.
-
Deep Learning on Real Geophysical Data: A Case Study for Distributed Acoustic Sensing Research
Authors:
Vincent Dumont,
Verónica Rodríguez Tribaldos,
Jonathan Ajo-Franklin,
Kesheng Wu
Abstract:
Deep Learning approaches for real, large, and complex scientific data sets can be very challenging to design. In this work, we present a complete search for a finely-tuned and efficiently scaled deep learning classifier to identify usable energy from seismic data acquired using Distributed Acoustic Sensing (DAS). While using only a subset of labeled images during training, we were able to identify…
▽ More
Deep Learning approaches for real, large, and complex scientific data sets can be very challenging to design. In this work, we present a complete search for a finely-tuned and efficiently scaled deep learning classifier to identify usable energy from seismic data acquired using Distributed Acoustic Sensing (DAS). While using only a subset of labeled images during training, we were able to identify suitable models that can be accurately generalized to unknown signal patterns. We show that by using 16 times more GPUs, we can increase the training speed by more than two orders of magnitude on a 50,000-image data set.
△ Less
Submitted 15 October, 2020;
originally announced October 2020.
-
Monitored wet-etch removal of individual dielectric layers from high-finesse Bragg mirrors
Authors:
Simon Bernard,
Thomas J. Clark,
Vincent Dumont,
Jiaxing Ma,
Jack C. Sankey
Abstract:
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this cas…
▽ More
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a low-cost, single-step, monitored wet etch technique for reliably removing (or partially removing) individual SiO$_2$ and Ta$_2$O$_5$ dielectric layers, in this case from a high-reflectivity fiber mirror. By immersing in acid and monitoring off-band reflected light, we show it is straightforward to iteratively (or continuously) remove six bilayers. At each stage, we characterize the coating performance with a Fabry-Pérot cavity, observing the expected stepwise decrease in finesse from 92,000$\pm$3,000 to 3,950$\pm$50, finding no evidence of added optical losses. The etch also removes the fiber's sidewall coating after a single bilayer, and, after six bilayers, confines the remaining coating to a $\sim$50-$μ$m-diameter pedestal at the center of the fiber tip. Vapor etching above the solution produces a tapered "pool cue" cladding profile, reducing the fiber diameter (nominally 125 $μ$m) to $\sim$100 $μ$m at an angle of $\sim$0.3$^\circ$ near the tip. Finally, we note that the data generated by this technique provides a sensitive estimate of the layers' optical depths. This technique could be readily adapted to free-space optics and other coatings.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Flexure-Tuned Membrane-at-the-Edge Optomechanical System
Authors:
Vincent Dumont,
Simon Bernard,
Christoph Reinhardt,
Alex Kato,
Maximilian Ruf,
Jack C. Sankey
Abstract:
We introduce a passively-aligned, flexure-tuned cavity optomechanical system in which a membrane is positioned microns from one end mirror of a Fabry-Perot optical cavity. By displacing the membrane through gentle flexure of its silicon supporting frame (i.e., to ~80 m radius of curvature (ROC)), we gain access to the full range of available optomechanical couplings, finding also that the optical…
▽ More
We introduce a passively-aligned, flexure-tuned cavity optomechanical system in which a membrane is positioned microns from one end mirror of a Fabry-Perot optical cavity. By displacing the membrane through gentle flexure of its silicon supporting frame (i.e., to ~80 m radius of curvature (ROC)), we gain access to the full range of available optomechanical couplings, finding also that the optical spectrum exhibits none of the abrupt discontinuities normally found in "membrane-in-the-middle" (MIM) systems. More aggressive flexure (3 m ROC) enables >15 microns membrane travel, milliradian tilt tuning, and a wavelength-scale (1.64 $\pm$ 0.78 microns) membrane-mirror separation. We also provide a complete set of analytical expressions for this system's leading-order dispersive and dissipative optomechanical couplings. Notably, this system can potentially generate orders of magnitude larger linear dissipative or quadratic dispersive strong coupling parameters than is possible with a MIM system. Additionally, it can generate the same purely quadratic dispersive coupling as a MIM system, but with significantly suppressed linear dissipative back-action (and force noise).
△ Less
Submitted 28 August, 2019; v1 submitted 11 May, 2019;
originally announced May 2019.
-
Characterization of the Global Network of Optical Magnetometers to search for Exotic Physics (GNOME)
Authors:
S. Afach,
D. Budker,
G. DeCamp,
V. Dumont,
Z. D. Grujić,
H. Guo,
D. F. Jackson Kimball,
T. W. Kornack,
V. Lebedev,
W. Li,
H. Masia-Roig,
S. Nix,
M. Padniuk,
C. A. Palm,
C. Pankow,
A. Penaflor,
X. Peng,
S. Pustelny,
T. Scholtes,
J. A. Smiga,
J. E. Stalnaker,
A. Weis,
A. Wickenbrock,
D. Wurm
Abstract:
The Global Network of Optical Magnetometers to search for Exotic physics (GNOME) is a network of geographically separated, time-synchronized, optically pumped atomic magnetometers that is being used to search for correlated transient signals heralding exotic physics. The GNOME is sensitive to nuclear- and electron-spin couplings to exotic fields from astrophysical sources such as compact dark-matt…
▽ More
The Global Network of Optical Magnetometers to search for Exotic physics (GNOME) is a network of geographically separated, time-synchronized, optically pumped atomic magnetometers that is being used to search for correlated transient signals heralding exotic physics. The GNOME is sensitive to nuclear- and electron-spin couplings to exotic fields from astrophysical sources such as compact dark-matter objects (for example, axion stars and domain walls). Properties of the GNOME sensors such as sensitivity, bandwidth, and noise characteristics are studied in the present work, and features of the network's operation (e.g., data acquisition, format, storage, and diagnostics) are described. Characterization of the GNOME is a key prerequisite to searches for and identification of exotic physics signatures.
△ Less
Submitted 24 July, 2018;
originally announced July 2018.
-
Network of sensitive magnetometers for urban studies
Authors:
T. A. Bowen,
E. Zhivun,
A. Wickenbrock,
V. Dumont,
S. D. Bale,
C. Pankow,
G. Dobler,
J. S. Wurtele,
D. Budker
Abstract:
The magnetic signature of an urban environment is investigated using a geographically distributed network of fluxgate magnetometers deployed in and around Berkeley, California. The system hardware and software are described and results from initial operation of the network are reported. The sensors sample the vector magnetic field with a 4 kHz resolution and are sensitive to fluctuations below 0.1…
▽ More
The magnetic signature of an urban environment is investigated using a geographically distributed network of fluxgate magnetometers deployed in and around Berkeley, California. The system hardware and software are described and results from initial operation of the network are reported. The sensors sample the vector magnetic field with a 4 kHz resolution and are sensitive to fluctuations below 0.1 $\textrm{nT}/\sqrt{\textrm{Hz}}$. Data from separate stations are synchronized to around $\pm100$ $μ{s}$ using GPS and computer system clocks. Data from all sensors are automatically uploaded to a central server. Anomalous events, such as lightning strikes, have been observed. A wavelet analysis is used to study observations over a wide range of temporal scales up to daily variations that show strong differences between weekend and weekdays. The Bay Area Rapid Transit (BART) is identified as the most dominant signal from these observations and a superposed epoch analysis is used to study and extract the BART signal. Initial results of the correlation between sensors are also presented.
△ Less
Submitted 7 November, 2017; v1 submitted 5 February, 2017;
originally announced February 2017.
-
Etch-Tuning and Design of Silicon Nitride Photonic Crystal Reflectors
Authors:
Simon Bernard,
Christoph Reinhardt,
Vincent Dumont,
Yves-Alain Peter,
Jack C. Sankey
Abstract:
By patterning a freestanding dielectric membrane into a photonic crystal reflector (PCR), it is possible to resonantly enhance its normal-incidence reflectivity, thereby realizing a thin, single-material mirror. In many PCR applications, the operating wavelength (e.g. that of a low-noise laser or emitter) is not tunable, imposing tolerances on crystal geometry that are not reliably achieved with s…
▽ More
By patterning a freestanding dielectric membrane into a photonic crystal reflector (PCR), it is possible to resonantly enhance its normal-incidence reflectivity, thereby realizing a thin, single-material mirror. In many PCR applications, the operating wavelength (e.g. that of a low-noise laser or emitter) is not tunable, imposing tolerances on crystal geometry that are not reliably achieved with standard nanolithography. Here we present a gentle technique to finely tune the resonant wavelength of a SiN PCR using iterative hydrofluoric acid etches. With little optimization, we achieve a 57-nm-thin photonic crystal having an operating wavelength within 0.15 nm (0.04 resonance linewidths) of our target (1550 nm). Our thin structure exhibits a broader and less pronounced transmission dip than is predicted by plane wave simulations, and we identify two effects leading to these discrepancies, both related to the divergence angle of a collimated laser beam. To overcome this limitation in future devices, we distill a series of simulations into a set of general design considerations for realizing robust, high-reflectivity resonances.
△ Less
Submitted 8 September, 2016; v1 submitted 3 September, 2016;
originally announced September 2016.
