Showing 1–45 of 45 results for author: Doye, J P K

Coarse-grained modelling of DNA-RNA hybrids

Authors: Eryk J. Ratajczyk, Petr Šulc, Andrew J. Turberfield, Jonathan P. K. Doye, Ard A. Louis

Abstract: We introduce oxNA, a new model for the simulation of DNA-RNA hybrids which is based on two previously developed coarse-grained models$\unicode{x2014}$oxDNA and oxRNA. The model naturally reproduces the physical properties of hybrid duplexes including their structure, persistence length and force-extension characteristics. By parameterising the DNA-RNA hydrogen bonding interaction we fit the model'… ▽ More We introduce oxNA, a new model for the simulation of DNA-RNA hybrids which is based on two previously developed coarse-grained models$\unicode{x2014}$oxDNA and oxRNA. The model naturally reproduces the physical properties of hybrid duplexes including their structure, persistence length and force-extension characteristics. By parameterising the DNA-RNA hydrogen bonding interaction we fit the model's thermodynamic properties to experimental data using both average-sequence and sequence-dependent parameters. To demonstrate the model's applicability we provide three examples of its use$\unicode{x2014}$calculating the free energy profiles of hybrid strand displacement reactions, studying the resolution of a short R-loop and simulating RNA-scaffolded wireframe origami. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 15 pages, 10 figures

Journal ref: J. Chem. Phys. 160, 115101 (2024)

Pipelined information flow in molecular mechanical circuits leads to increased error and irreversibility

Authors: Ian Seet, Thomas E. Ouldridge, Jonathan P. K. Doye

Abstract: Pipelining is a design technique for logical circuits that allows for higher throughput than circuits in which multiple computations are fed through the system one after the other. It allows for much faster computation than architectures in which inputs must pass through every layer of the circuit before the next computation can begin (phased chaining). We explore the hypothesis that these advanta… ▽ More Pipelining is a design technique for logical circuits that allows for higher throughput than circuits in which multiple computations are fed through the system one after the other. It allows for much faster computation than architectures in which inputs must pass through every layer of the circuit before the next computation can begin (phased chaining). We explore the hypothesis that these advantages may be offset by a higher error rate, logical irreversibility and greater thermodynamic costs by simulating pipelined molecular mechanical circuits using an explicit physical model. We observe the emergent logical irreversibility, and see that the simultaneous action of multiple components indeed leads to a higher error rate than in phase-chained circuits. The thermodynamic costs of operating the gates are much larger than in equivalent phase-chained circuits, and these costs do not appear to tend to zero in the limit of slow gate operation. Redesigning the gates to eliminate errors and artificially enforcing logical reversibility reduces the thermodynamic costs and recovers thermodynamically reversible behaviour in the limit of slow gate operation. The breakdown of logical reversibility and accuracy are both associated with a breakdown of the digital behaviour of the device, likely contributing to thermodynamic costs that are large relative to the scale of the information being processed. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Simulation of reversible molecular mechanical logic gates and circuits

Authors: Ian Seet, Thomas E. Ouldridge, Jonathan P. K. Doye

Abstract: Landauer's principle places a fundamental lower limit on the work required to perform a logically irreversible operation. Logically reversible gates provide a way to avoid these work costs, and also simplify the task of making the computation as a whole thermodynamically reversible. The inherent reversibility of mechanical logic gates would make them good candidates for the design of practical log… ▽ More Landauer's principle places a fundamental lower limit on the work required to perform a logically irreversible operation. Logically reversible gates provide a way to avoid these work costs, and also simplify the task of making the computation as a whole thermodynamically reversible. The inherent reversibility of mechanical logic gates would make them good candidates for the design of practical logically reversible computing systems if not for the relatively large size and mass of such systems. In this paper, we outline the design and simulation of reversible molecular mechanical logic gates that come close to the limits of thermodynamic reversibility even under the effects of thermal noise, and outline associated circuit components from which arbitrary combinatorial reversible circuits can be constructed and simulated. We demonstrate that isolated components can be operated in a thermodynamically reversible manner, and explore the complexities of combining components to implement more complex computations. Finally, we demonstrate a method to construct arbitrarily large reversible combinatorial circuits using multiple external controls and signal boosters with a working half-adder circuit. △ Less

Submitted 16 November, 2022; v1 submitted 2 May, 2022; originally announced May 2022.

Journal ref: Phys. Rev. E 107, 024134 (2023)

Measuring internal forces in single-stranded DNA: Application to a DNA force clamp

Authors: Megan C. Engel, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: We present a new method for calculating internal forces in DNA structures using coarse-grained models and demonstrate its utility with the oxDNA model. The instantaneous forces on individual nucleotides are explored and related to model potentials, and using our framework, internal forces are calculated for two simple DNA systems and for a recently-published nanoscopic force clamp. Our results hig… ▽ More We present a new method for calculating internal forces in DNA structures using coarse-grained models and demonstrate its utility with the oxDNA model. The instantaneous forces on individual nucleotides are explored and related to model potentials, and using our framework, internal forces are calculated for two simple DNA systems and for a recently-published nanoscopic force clamp. Our results highlight some pitfalls associated with conventional methods for estimating internal forces, which are based on elastic polymer models, and emphasise the importance of carefully considering secondary structure and ionic conditions when modelling the elastic behaviour of single-stranded DNA. Beyond its relevance to the DNA nanotechnological community, we expect our approach to be broadly applicable to calculations of internal force in a variety of structures -- from DNA to protein -- and across other coarse-grained simulation models. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 39 pages, 9 figures

Journal ref: J. Chem. Theor. Comput. 16, 7764-7775 (2020)

Characterising DNA T-motifs by Simulation and Experiment

Authors: Behnam Najafi, Katherine G. Young, Jonathan Bath, Ard A. Louis, Jonathan P. K. Doye, Andrew J. Turberfield

Abstract: The success of DNA nanotechnology has been driven by the discovery of novel structural motifs with a wide range of shapes and uses. We present a comprehensive study of the T-motif, a 3-armed, planar, right-angled junction that has been used in the self-assembly of DNA polyhedra and periodic structures. The motif is formed through the interaction of a bulge loop in one duplex and a sticky end of an… ▽ More The success of DNA nanotechnology has been driven by the discovery of novel structural motifs with a wide range of shapes and uses. We present a comprehensive study of the T-motif, a 3-armed, planar, right-angled junction that has been used in the self-assembly of DNA polyhedra and periodic structures. The motif is formed through the interaction of a bulge loop in one duplex and a sticky end of another. The polarity of the sticky end has significant consequences for the thermodynamic and geometrical properties of the T-motif: different polarities create junctions spanning different grooves of the duplex. We compare experimental binding strengths with predictions of oxDNA, a coarse-grained model of DNA, for various loop sizes. We find that, although both sticky-end polarities can create stable junctions, junctions resulting from 5$'$ sticky ends are stable over a wider range of bulge loop sizes. We highlight the importance of possible coaxial stacking interactions within the motif and investigate how each coaxial stacking interaction stabilises the structure and favours a particular geometry. △ Less

Submitted 23 May, 2020; originally announced May 2020.

Comments: 8 pages; 8 figures

Coarse-grained modelling of the structural properties of DNA origami

Authors: Benedict E. K. Snodin, John S. Schreck, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: We use the oxDNA coarse-grained model to provide a detailed characterization of the fundamental structural properties of DNA origamis, focussing on archetypal 2D and 3D origamis. The model reproduces well the characteristic pattern of helix bending in a 2D origami, showing that it stems from the intrinsic tendency of anti-parallel four-way junctions to splay apart, a tendency that is enhanced both… ▽ More We use the oxDNA coarse-grained model to provide a detailed characterization of the fundamental structural properties of DNA origamis, focussing on archetypal 2D and 3D origamis. The model reproduces well the characteristic pattern of helix bending in a 2D origami, showing that it stems from the intrinsic tendency of anti-parallel four-way junctions to splay apart, a tendency that is enhanced both by less screened electrostatic interactions and by increased thermal motion. We also compare to the structure of a 3D origami whose structure has been determined by cryo-electron microscopy. The oxDNA average structure has a root-mean-square deviation from the experimental structure of 8.4 Angstrom, which is of the order of the experimental resolution. These results illustrate that the oxDNA model is capable of providing detailed and accurate insights into the structure of DNA origamis, and has the potential to be used to routinely pre-screen putative origami designs. △ Less

Submitted 22 September, 2018; originally announced September 2018.

Comments: 14 pages, 10 figures

Journal ref: Nucleic Acids Res. 47, 1585-1597 (2019)

Self-assembly of two-dimensional binary quasicrystals: A possible route to a DNA quasicrystal

Authors: Aleks Reinhardt, John S. Schreck, Flavio Romano, Jonathan P. K. Doye

Abstract: We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motif… ▽ More We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motifs, which can be chosen to bond with one another very specifically by tuning the DNA sequences of the protruding arms. We explore several possible design strategies and conclude that DNA star tiles that are designed to interact with one another in a specific but not overly constrained way could potentially be used to construct soft quasicrystals in experiment. We verify that such star tiles can form stable dodecagonal motifs using oxDNA, a realistic coarse-grained model of DNA. △ Less

Submitted 22 July, 2016; originally announced July 2016.

Journal ref: J. Phys.: Condens. Matter 29, 014006 (2017)

Coarse-grained modelling of supercoiled RNA

Authors: Christian Matek, Petr Šulc, Ferdinando Randisi, Jonathan P. K. Doye, Ard A. Louis

Abstract: We study the behaviour of double-stranded RNA under twist and tension using oxRNA, a recently developed coarse-grained model of RNA. Introducing explicit salt-dependence into the model allows us to directly compare our results to data from recent single-molecule experiments. The model reproduces extension curves as a function of twist and stretching force, including the buckling transition and the… ▽ More We study the behaviour of double-stranded RNA under twist and tension using oxRNA, a recently developed coarse-grained model of RNA. Introducing explicit salt-dependence into the model allows us to directly compare our results to data from recent single-molecule experiments. The model reproduces extension curves as a function of twist and stretching force, including the buckling transition and the behaviour of plectoneme structures. For negative supercoiling, we predict denaturation bubble formation in plectoneme end-loops, suggesting preferential plectoneme localisation in weak base sequences. OxRNA exhibits a positive twist-stretch coupling constant, in agreement with recent experimental observations. △ Less

Submitted 8 June, 2015; originally announced June 2015.

Comments: 8 pages + 5 pages Supplementary Material

Journal ref: J. Chem. Phys. 143, 243122 (2015)

Introducing Improved Structural Properties and Salt Dependence into a Coarse-Grained Model of DNA

Authors: Benedict E. K. Snodin, Ferdinando Randisi, Majid Mosayebi, Petr Sulc, John S. Schreck, Flavio Romano, Thomas E. Ouldridge, Roman Tsukanov, Eyal Nir, Ard A. Louis, Jonathan P. K. Doye

Abstract: We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as… ▽ More We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as DNA origami which are sensitive to these geometric features. Further, we extend the model, which was previously parameterised to just one salt concentration ([Na$^+$]=0.5M), so that it can be used for a range of salt concentrations including those corresponding to physiological conditions. Finally, we use new experimental data to parameterise the oxDNA potential so that consecutive adenine bases stack with a different strength to consecutive thymine bases, a feature which allows a more accurate treatment of systems where the flexibility of single-stranded regions is important. We illustrate the new possibilities opened up by the updated model, oxDNA2, by presenting results from simulations of the structure of large DNA objects and by using the model to investigate some salt-dependent properties of DNA. △ Less

Submitted 19 May, 2015; v1 submitted 3 April, 2015; originally announced April 2015.

Journal ref: J. Chem. Phys. 142, 234901 (2015)

Force-induced rupture of a DNA duplex

Authors: Majid Mosayebi, Ard A. Louis, Jonathan P. K. Doye, Thomas E. Ouldridge

Abstract: The rupture of double-stranded DNA under stress is a key process in biophysics and nanotechnology. In this article we consider the shear-induced rupture of short DNA duplexes, a system that has been given new importance by recently designed force sensors and nanotechnological devices. We argue that rupture must be understood as an activated process, where the duplex state is metastable and the str… ▽ More The rupture of double-stranded DNA under stress is a key process in biophysics and nanotechnology. In this article we consider the shear-induced rupture of short DNA duplexes, a system that has been given new importance by recently designed force sensors and nanotechnological devices. We argue that rupture must be understood as an activated process, where the duplex state is metastable and the strands will separate in a finite time that depends on the duplex length and the force applied. Thus, the critical shearing force required to rupture a duplex within a given experiment depends strongly on the time scale of observation. We use simple models of DNA to demonstrate that this approach naturally captures the experimentally observed dependence of the critical force on duplex length for a given observation time. In particular, the critical force is zero for the shortest duplexes, before rising sharply and then plateauing in the long length limit. The prevailing approach, based on identifying when the presence of each additional base pair within the duplex is thermodynamically unfavorable rather than allowing for metastability, does not predict a time-scale-dependent critical force and does not naturally incorporate a critical force of zero for the shortest duplexes. Additionally, motivated by a recently proposed force sensor, we investigate application of stress to a duplex in a mixed mode that interpolates between shearing and unzip**. As with pure shearing, the critical force depends on the time scale of observation; at a fixed time scale and duplex length, the critical force exhibits a sigmoidal dependence on the fraction of the duplex that is subject to shearing. △ Less

Submitted 12 February, 2015; originally announced February 2015.

Comments: 10 pages, 6 figures

Journal ref: ACS Nano 9, 11993-12003 (2015)

Characterizing the bending and flexibility induced by bulges in DNA duplexes

Authors: John S. Schreck, Thomas E. Ouldridge, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize s… ▽ More Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize such bulged duplexes. We find that this motif can adopt structures belonging to two main classes: one where the stacking of the helices at the center of the system is preserved, the geometry is roughly straight and the bulge is on one side of the duplex, and the other where the stacking at the center is broken, thus allowing this junction to act as a hinge and increasing flexibility. Small loops favor states where stacking at the center of the duplex is preserved, with loop bases either flipped out or incorporated into the duplex. Duplexes with longer loops show more of a tendency to unstack at the bulge and adopt an open structure. The unstacking probability, however, is highest for loops of intermediate lengths, when the rigidity of single-stranded DNA is significant and the loop resists compression. The properties of this basic structural motif clearly correlate with the structural behavior of certain nano-scale objects, where the enhanced flexibility associated with larger bulges has been used to tune the self-assembly product as well as the detailed geometry of the resulting nanostructures. △ Less

Submitted 19 December, 2014; originally announced December 2014.

Comments: 12 pages + 4 pages of supplemental materials

Journal ref: J. Chem. Phys. 142, 165101 (2015)

Modelling toehold-mediated RNA strand displacement

Authors: Petr Šulc, Thomas E. Ouldridge, Flavio Romano, Jonathan P. K. Doye, Ard A. Louis

Abstract: We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We… ▽ More We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We study the rate of displacement reactions as a function of the length of the toehold and temperature and make two experimentally testable predictions: that the displacement is faster if the toehold is placed at the 5' end of the substrate and that the displacement slows down with increasing temperature for longer toeholds. △ Less

Submitted 12 November, 2014; originally announced November 2014.

Journal ref: Biophysical Journal , Volume 108 , Issue 5 , 1238 - 1247, 2015

The role of loop stacking in the dynamics of DNA hairpin formation

Authors: Majid Mosayebi, Flavio Romano, Thomas E. Ouldridge, Ard A. Louis, Jonathan P. K. Doye

Abstract: We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. U… ▽ More We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. USA 2001, 98, 5584-5589]. The hairpin closing process involves the formation of an initial nucleus of one or two bonds between the stems followed by a rapid zippering of the stem. At high temperatures, typically above the hairpin melting temperature, an effective negative activation enthalpy is observed because the nucleus has a lower enthalpy than the open state. By contrast, at low temperatures, the activation enthalpy becomes positive mainly due to the increasing energetic cost of bending a loop that becomes increasingly highly stacked as the temperature decreases. We show that stacking must be very strong to induce this experimentally observed behavior, and that the existence of just a few weak stacking points along the loop can substantially suppress it. Non-native base pairs are observed to have only a small effect, slightly accelerating hairpin formation. △ Less

Submitted 5 October, 2014; originally announced October 2014.

Comments: 24 pages, 9 figures

Journal ref: J. Phys. Chem. B, 2014, 118 (49), 14326-14335

DNA hairpins primarily promote duplex melting rather than inhibiting hybridization

Authors: John S. Schreck, Thomas E. Ouldridge, Flavio Romano, Petr Sulc, Liam Shaw, Ard A. Louis, Jonathan P. K. Doye

Abstract: The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form… ▽ More The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form during the melting process, stabilizing partially melted states, and facilitating dissociation. These results may help guide the design of DNA devices that use hairpins to modulate hybridization and dissociation pathways and rates. △ Less

Submitted 19 August, 2014; originally announced August 2014.

Comments: 5 pages + 14 pages of appendices

Journal ref: Nucl. Acids Res. 43, 6181-6190 (2015)

Effects of surface interactions on heterogeneous ice nucleation for a monatomic water model

Authors: Aleks Reinhardt, Jonathan P. K. Doye

Abstract: Despite its importance in atmospheric science, much remains unknown about the microscopic mechanism of heterogeneous ice nucleation. In this work, we perform hybrid Monte Carlo simulations of the heterogeneous nucleation of ice on a range of generic surfaces, both flat and structured, in order to probe the underlying factors affecting the nucleation process. The structured surfaces we study compri… ▽ More Despite its importance in atmospheric science, much remains unknown about the microscopic mechanism of heterogeneous ice nucleation. In this work, we perform hybrid Monte Carlo simulations of the heterogeneous nucleation of ice on a range of generic surfaces, both flat and structured, in order to probe the underlying factors affecting the nucleation process. The structured surfaces we study comprise one basal plane bilayer of ice with varying lattice parameters and interaction strengths. We show that what determines the propensity for nucleation is not just the surface attraction, but also the orientational ordering imposed on liquid water near a surface. In particular, varying the ratio of the surface's attraction and orientational ordering can change the mechanism by which nucleation occurs: ice can nucleate on the structured surface even when the orientational ordering imposed by the surface is weak, as the water molecules that interact strongly with the surface are themselves a good template for further growth. We also show that lattice matching is important for heterogeneous nucleation on the structured surface we study. We rationalise these brute-force simulation results by explicitly calculating the interfacial free energies of ice and liquid water in contact with the nucleating surface and their variation with surface interaction parameters. △ Less

Submitted 22 April, 2014; originally announced April 2014.

Journal ref: J. Chem. Phys. 141, 084501 (2014)

Plectoneme tip bubbles: Coupled denaturation and writhing in supercoiled DNA

Authors: Christian Matek, Thomas E. Ouldridge, Jonathan P. K. Doye, Ard A. Louis

Abstract: Biological information is not only stored in the digital chemical sequence of double helical DNA, but is also encoded in the mechanical properties of the DNA strands, which can influence biochemical processes involving its readout. For example, loop formation in the Lac operon can regulate the expression of key genes, and DNA supercoiling is closely correlated to rhythmic circardian gene expressio… ▽ More Biological information is not only stored in the digital chemical sequence of double helical DNA, but is also encoded in the mechanical properties of the DNA strands, which can influence biochemical processes involving its readout. For example, loop formation in the Lac operon can regulate the expression of key genes, and DNA supercoiling is closely correlated to rhythmic circardian gene expression in cyanobacteria. Supercoiling is also important for large scale organisation of the genome in both eukaryotic and prokaryotic cells. DNA can respond to torsional stress by writhing to form looped structures called plectonemes, thus transferring energy stored as twist into energy stored in bending. Denaturation bubbles can also relax torsional stress, with the enthalpic cost of breaking bonds being compensated by their ability to absorb undertwist. Here we predict a novel regime where bubbles form at the tips of plectonemes, and study its properties using coarse-grained simulations. These tip bubbles can occur for both positive and negative supercoiling and greatly reduce plectoneme diffusion by a pinning mechanism. They can cause plectonemes to preferentially localise to AT rich regions, because bubbles more easily form there. The tip-bubble regime occurs for supercoiling densities and forces that are typically encountered for DNA in vivo, and may be exploited for biological control of genomic processes. △ Less

Submitted 10 April, 2014; originally announced April 2014.

Comments: 5 pages + 26 pages Supplementary Material

Journal ref: Scientific Reports, 5, 7655 (2015)

A nucleotide-level coarse-grained model of RNA

Authors: Petr Šulc, Flavio Romano, Thomas E. Ouldridge, Jonathan P. K. Doye, Ard A. Louis

Abstract: We present a new, nucleotide-level model for RNA, oxRNA, based on the coarse-graining methodology recently developed for the oxDNA model of DNA. The model is designed to reproduce structural, mechanical and thermodynamic properties of RNA, and the coarse-graining level aims to retain the relevant physics for RNA hybridization and the structure of single- and double-stranded RNA. In order to explor… ▽ More We present a new, nucleotide-level model for RNA, oxRNA, based on the coarse-graining methodology recently developed for the oxDNA model of DNA. The model is designed to reproduce structural, mechanical and thermodynamic properties of RNA, and the coarse-graining level aims to retain the relevant physics for RNA hybridization and the structure of single- and double-stranded RNA. In order to explore its strengths and weaknesses, we test the model in a range of nanotechnological and biological settings. Applications explored include the folding thermodynamics of a pseudoknot, the formation of a kissing loop complex, the structure of a hexagonal RNA nanoring, and the unzip** of a hairpin motif. We argue that the model can be used for efficient simulations of the structure of systems with thousands of base pairs, and for the assembly of systems of up to hundreds of base pairs. The source code implementing the model is released for public use. △ Less

Submitted 17 March, 2014; originally announced March 2014.

Comments: 25 pages

Journal ref: J. Chem. Phys. 140, 235102 (2014)

Coarse-graining DNA for simulations of DNA nanotechnology

Authors: Jonathan P. K. Doye, Thomas E. Ouldridge, Ard A. Louis, Flavio Romano, Petr Sulc, Christian Matek, Benedict E. K. Snodin, Lorenzo Rovigatti, John S. Schreck, Ryan M. Harrison, William P. J. Smith

Abstract: To simulate long time and length scale processes involving DNA it is necessary to use a coarse-grained description. Here we provide an overview of different approaches to such coarse graining, focussing on those at the nucleotide level that allow the self-assembly processes associated with DNA nanotechnology to be studied. OxDNA, our recently-developed coarse-grained DNA model, is particularly sui… ▽ More To simulate long time and length scale processes involving DNA it is necessary to use a coarse-grained description. Here we provide an overview of different approaches to such coarse graining, focussing on those at the nucleotide level that allow the self-assembly processes associated with DNA nanotechnology to be studied. OxDNA, our recently-developed coarse-grained DNA model, is particularly suited to this task, and has opened up this field to systematic study by simulations. We illustrate some of the range of DNA nanotechnology systems to which the model is being applied, as well as the insights it can provide into fundamental biophysical properties of DNA. △ Less

Submitted 18 August, 2013; originally announced August 2013.

Comments: 20 pages, 9 figures

Journal ref: Phys. Chem. Chem. Phys. 15, 20395-20414 (2013)

Homogeneous TIP4P/2005 ice nucleation at low supercooling

Authors: Aleks Reinhardt, Jonathan P. K. Doye

Abstract: We present a partial free energy profile for the homogeneous nucleation of ice using an all-atom model of water at low supercooling, at which ice growth dynamics are reasonably accessible to simulation. We demonstrate that the free energy profile is well described by classical nucleation theory, and that the nucleation barrier is entropic in origin. We also estimate to first order the temperature… ▽ More We present a partial free energy profile for the homogeneous nucleation of ice using an all-atom model of water at low supercooling, at which ice growth dynamics are reasonably accessible to simulation. We demonstrate that the free energy profile is well described by classical nucleation theory, and that the nucleation barrier is entropic in origin. We also estimate to first order the temperature dependence of the interfacial free energy. △ Less

Submitted 21 June, 2013; originally announced June 2013.

Journal ref: J. Chem. Phys. 139, 096102 (2013)

Computing phase diagrams for a quasicrystal-forming patchy-particle system

Authors: Aleks Reinhardt, Flavio Romano, Jonathan P. K. Doye

Abstract: We introduce an approach to computing the free energy of quasicrystals, which we use to calculate phase diagrams for systems of two-dimensional patchy particles with five regularly arranged patches that have previously been shown to form dodecagonal quasicrystals. We find that the quasicrystal is a thermodynamically stable phase for a wide range of conditions and remains a robust feature of the sy… ▽ More We introduce an approach to computing the free energy of quasicrystals, which we use to calculate phase diagrams for systems of two-dimensional patchy particles with five regularly arranged patches that have previously been shown to form dodecagonal quasicrystals. We find that the quasicrystal is a thermodynamically stable phase for a wide range of conditions and remains a robust feature of the system as the potential's parameters are varied. We also demonstrate that the quasicrystal is entropically stabilised over its crystalline approximants. △ Less

Submitted 8 April, 2013; v1 submitted 11 February, 2013; originally announced February 2013.

Journal ref: Phys. Rev. Lett. 110, 255503 (2013)

Simulating a burnt-bridges DNA motor with a coarse-grained DNA model

Authors: Petr Šulc, Thomas E. Ouldridge, Flavio Romano, Jonathan P. K. Doye, Ard A. Louis

Abstract: We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the step** process… ▽ More We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the step** process to the spatial separation of stators, finding that an increased distance can suppress successful steps due to the build up of unfavourable tension. The mechanism of suppression suggests that varying the distance between stators could be used as a method for improving signal-to-noise ratios for motors that are required to make a decision at a junction of stators. △ Less

Submitted 18 December, 2012; originally announced December 2012.

Comments: 12 pages

Journal ref: Natural Computing, 13, 535-547 (2014)

Coarse-grained simulations of DNA overstretching

Authors: Flavio Romano, Debayan Chakraborty, Jonathan P. K. Doye, Thomas E. Ouldridge, Ard. A. Louis

Abstract: We use a recently developed coarse-grained model to simulate the overstretching of duplex DNA. Overstretching at 23C occurs at 74 pN in the model, about 6-7 pN higher than the experimental value at equivalent salt conditions. Furthermore, the model reproduces the temperature dependence of the overstretching force well. The mechanism of overstretching is always force-induced melting by unpeeling fr… ▽ More We use a recently developed coarse-grained model to simulate the overstretching of duplex DNA. Overstretching at 23C occurs at 74 pN in the model, about 6-7 pN higher than the experimental value at equivalent salt conditions. Furthermore, the model reproduces the temperature dependence of the overstretching force well. The mechanism of overstretching is always force-induced melting by unpeeling from the free ends. That we never see S-DNA (overstretched duplex DNA), even though there is clear experimental evidence for this mode of overstretching under certain conditions, suggests that S-DNA is not simply an unstacked but hydrogen-bonded duplex, but instead probably has a more exotic structure. △ Less

Submitted 29 January, 2013; v1 submitted 26 September, 2012; originally announced September 2012.

Comments: 11 pages, 11 figures

Journal ref: J. Chem. Phys. 138, 085101 (2013)

Local order parameters for use in driving homogeneous ice nucleation with all-atom models of water

Authors: Aleks Reinhardt, Jonathan P. K. Doye, Eva G. Noya, Carlos Vega

Abstract: We present a local order parameter based on the standard Steinhardt-Ten Wolde approach that is capable both of tracking and of driving homogeneous ice nucleation in simulations of all-atom models of water. We demonstrate that it is capable of forcing the growth of ice nuclei in supercooled liquid water simulated using the TIP4P/2005 model using overbiassed umbrella sampling Monte Carlo simulations… ▽ More We present a local order parameter based on the standard Steinhardt-Ten Wolde approach that is capable both of tracking and of driving homogeneous ice nucleation in simulations of all-atom models of water. We demonstrate that it is capable of forcing the growth of ice nuclei in supercooled liquid water simulated using the TIP4P/2005 model using overbiassed umbrella sampling Monte Carlo simulations. However, even with such an order parameter, the dynamics of ice growth in deeply supercooled liquid water in all-atom models of water are shown to be very slow, and so the computation of free energy landscapes and nucleation rates remains extremely challenging. △ Less

Submitted 8 November, 2012; v1 submitted 29 August, 2012; originally announced August 2012.

Comments: This version incorporates the minor changes made to the paper following peer review

Journal ref: J. Chem. Phys. 137, 194504 (2012)

Sequence-dependent thermodynamics of a coarse-grained DNA model

Authors: Petr Šulc, Flavio Romano, Thomas E. Ouldridge, Lorenzo Rovigatti, Jonathan P. K. Doye, Ard A. Louis

Abstract: We introduce a sequence-dependent parametrization for a coarse-grained DNA model [T. E. Ouldridge, A. A. Louis, and J. P. K. Doye, J. Chem. Phys. 134, 085101 (2011)] originally designed to reproduce the properties of DNA molecules with average sequences. The new parametrization introduces sequence-dependent stacking and base-pairing interaction strengths chosen to reproduce the melting temperature… ▽ More We introduce a sequence-dependent parametrization for a coarse-grained DNA model [T. E. Ouldridge, A. A. Louis, and J. P. K. Doye, J. Chem. Phys. 134, 085101 (2011)] originally designed to reproduce the properties of DNA molecules with average sequences. The new parametrization introduces sequence-dependent stacking and base-pairing interaction strengths chosen to reproduce the melting temperatures of short duplexes. By develo** a histogram reweighting technique, we are able to fit our parameters to the melting temperatures of thousands of sequences. To demonstrate the flexibility of the model, we study the effects of sequence on: (a) the heterogeneous stacking transition of single strands, (b) the tendency of a duplex to fray at its melting point, (c) the effects of stacking strength in the loop on the melting temperature of hairpins, (d) the force-extension properties of single strands and (e) the structure of a kissing-loop complex. Where possible we compare our results with experimental data and find a good agreement. A simulation code called oxDNA, implementing our model, is available as free software. △ Less

Submitted 14 July, 2012; originally announced July 2012.

Comments: 15 pages

Journal ref: J. Chem. Phys. 137, 135101 (2012)

The effect of topology on the structure and free energy landscape of DNA kissing complexes

Authors: Flavio Romano, Alex Hudson, Jonathan P. K. Doye, Thomas E. Ouldridge, Ard A. Louis

Abstract: We use a recently developed coarse-grained model for DNA to study kissing complexes formed by hybridization of complementary hairpin loops. The binding of the loops is topologically constrained because their linking number must remain constant. By studying systems with linking numbers -1, 0 or 1 we show that the average number of interstrand base pairs is larger when the topology is more favourabl… ▽ More We use a recently developed coarse-grained model for DNA to study kissing complexes formed by hybridization of complementary hairpin loops. The binding of the loops is topologically constrained because their linking number must remain constant. By studying systems with linking numbers -1, 0 or 1 we show that the average number of interstrand base pairs is larger when the topology is more favourable for the right-handed wrap** of strands around each other. The thermodynamic stability of the kissing complex also decreases when the linking number changes from -1 to 0 to 1. The structures of the kissing complexes typically involve two intermolecular helices that coaxially stack with the hairpin stems at a parallel four-way junction. △ Less

Submitted 15 March, 2012; originally announced March 2012.

Journal ref: J. Chem. Phys. 136, 215102 (2012)

Free energy landscapes for homogeneous nucleation of ice for a monatomic water model

Authors: Aleks Reinhardt, Jonathan P. K. Doye

Abstract: We simulate the homogeneous nucleation of ice from supercooled liquid water at 220 K in the isobaric-isothermal ensemble using the MW monatomic water potential. Monte Carlo simulations using umbrella sampling are performed in order to determine the nucleation free energy barrier. We find the Gibbs energy profile to be relatively consistent with that predicted by classical nucleation theory; the fr… ▽ More We simulate the homogeneous nucleation of ice from supercooled liquid water at 220 K in the isobaric-isothermal ensemble using the MW monatomic water potential. Monte Carlo simulations using umbrella sampling are performed in order to determine the nucleation free energy barrier. We find the Gibbs energy profile to be relatively consistent with that predicted by classical nucleation theory; the free energy barrier to nucleation was determined to be ~18 kT and the critical nucleus comprised ~85 ice particles. Growth from the supercooled liquid gives clusters that are predominantly cubic, whilst starting with a pre-formed subcritical nucleus of cubic or hexagonal ice results in the growth of predominantly that phase of ice only. △ Less

Submitted 21 December, 2011; v1 submitted 30 September, 2011; originally announced September 2011.

Comments: 11 pages, 6 figures; updated with nucleation rates and additional comparisons with some newly published papers

Journal ref: J. Chem. Phys. 136, 054501 (2012)

Evolutionary Dynamics in a Simple Model of Self-Assembly

Authors: Iain G. Johnston, Sebastian A. Ahnert, Jonathan P. K. Doye, Ard A. Louis

Abstract: We investigate the evolutionary dynamics of an idealised model for the robust self-assembly of two-dimensional structures called polyominoes. The model includes rules that encode interactions between sets of square tiles that drive the self-assembly process. The relationship between the model's rule set and its resulting self-assembled structure can be viewed as a genotype-phenotype map and incorp… ▽ More We investigate the evolutionary dynamics of an idealised model for the robust self-assembly of two-dimensional structures called polyominoes. The model includes rules that encode interactions between sets of square tiles that drive the self-assembly process. The relationship between the model's rule set and its resulting self-assembled structure can be viewed as a genotype-phenotype map and incorporated into a genetic algorithm. The rule sets evolve under selection for specified target structures. The corresponding, complex fitness landscape generates rich evolutionary dynamics as a function of parameters such as the population size, search space size, mutation rate, and method of recombination. Furthermore, these systems are simple enough that in some cases the associated model genome space can be completely characterised, shedding light on how the evolutionary dynamics depends on the detailed structure of the fitness landscape. Finally, we apply the model to study the emergence of the preference for dihedral over cyclic symmetry observed for homomeric protein tetramers. △ Less

Submitted 28 February, 2011; originally announced February 2011.

Journal ref: Phys. Rev. E 83, 066105 (2011)

DNA nanotweezers studied with a coarse-grained model of DNA

Authors: Thomas E. Ouldridge, Ard A. Louis, Jonathan P. K. Doye

Abstract: We introduce a coarse-grained rigid nucleotide model of DNA that reproduces the basic thermodynamics of short strands: duplex hybridization, single-stranded stacking and hairpin formation, and also captures the essential structural properties of DNA: the helical pitch, persistence length and torsional stiffness of double-stranded molecules, as well as the comparative flexibility of unstacked sin… ▽ More We introduce a coarse-grained rigid nucleotide model of DNA that reproduces the basic thermodynamics of short strands: duplex hybridization, single-stranded stacking and hairpin formation, and also captures the essential structural properties of DNA: the helical pitch, persistence length and torsional stiffness of double-stranded molecules, as well as the comparative flexibility of unstacked single strands. We apply the model to calculate the detailed free-energy landscape of one full cycle of DNA 'tweezers', a simple machine driven by hybridization and strand displacement. △ Less

Submitted 3 November, 2009; originally announced November 2009.

Comments: 4 pages, 5 figures

Journal ref: Phys. Rev. Lett. 104, 178101 (2010)

The structure of binary Lennard-Jones clusters: The effects of atomic size ratio

Authors: Jonathan P. K. Doye, Lars Meyer

Abstract: We introduce a global optimization approach for binary clusters that for a given cluster size is able to directly search for the structure and composition that has the greatest stability. We apply this approach to binary Lennard-Jones clusters, where the strength of the interactions between the two atom types is the same, but where the atoms have different sizes. We map out how the most stable s… ▽ More We introduce a global optimization approach for binary clusters that for a given cluster size is able to directly search for the structure and composition that has the greatest stability. We apply this approach to binary Lennard-Jones clusters, where the strength of the interactions between the two atom types is the same, but where the atoms have different sizes. We map out how the most stable structure depends on the cluster size and the atomic size ratio for clusters with up to 100 atoms and up to 30% difference in atom size. A substantial portion of this parameter space is occupied by structures that are polytetrahedral, both those that are polyicosahedral and those that involve disclination lines. Such structures involve substantial strains for one-component Lennard-Jones clusters, but can be stabilized by the different-sized atoms in the binary clusters. These structures often have a `core-shell' geometry, where the larger atoms are on the surface, and the smaller atoms are in the core. △ Less

Submitted 10 April, 2006; originally announced April 2006.

Comments: 13 pages, 9 figures

Melting of aluminium clusters

Authors: Eva G. Noya, Jonathan P. K. Doye, Florent Calvo

Abstract: The melting of Al clusters in the size range 49 <= N <= 62 has been studied using two model interatomic potentials. The results for the two models are significantly different. The glue potential exhibits a smooth relatively featureless heat capacity curve for all sizes except for N = 54 and N = 55, sizes at which icosahedral structures are favoured over the polytetrahedral. Gupta heat capacity c… ▽ More The melting of Al clusters in the size range 49 <= N <= 62 has been studied using two model interatomic potentials. The results for the two models are significantly different. The glue potential exhibits a smooth relatively featureless heat capacity curve for all sizes except for N = 54 and N = 55, sizes at which icosahedral structures are favoured over the polytetrahedral. Gupta heat capacity curves, instead, show a well-defined peak that is indicative of a first-order-like transition. The differences between the two models reflect the different ground-state structures, and neither potential is able to reproduce or explain the size dependence of the melting transition recently observed in experiments. △ Less

Submitted 13 September, 2005; originally announced September 2005.

Journal ref: Phys. Rev. B 73, 125407 (2006)

Geometric magic numbers of sodium clusters: Interpretation of the melting behaviour

Authors: Eva G. Noya, Jonathan P. K. Doye, David J. Wales

Abstract: Putative global minima of sodium clusters with up to 380 atoms have been located for two model interatomic potentials. Structures based upon the Mackay icosahedra predominate for both potentials, and the magic numbers for the Murrell-Mottram model show excellent agreement with the sizes at which maxima in the latent heat and entropy change at melting have been found in experiment. Putative global minima of sodium clusters with up to 380 atoms have been located for two model interatomic potentials. Structures based upon the Mackay icosahedra predominate for both potentials, and the magic numbers for the Murrell-Mottram model show excellent agreement with the sizes at which maxima in the latent heat and entropy change at melting have been found in experiment. △ Less

Submitted 14 June, 2005; originally announced June 2005.

Comments: 4 pages, 2 figures

Journal ref: Eur. Phys. J. D 43, 57-60 (2007)

Map** the magic numbers in binary Lennard-Jones clusters

Authors: Jonathan P. K. Doye, Lars Meyer

Abstract: Using a global optimization approach that directly searches for the composition of greatest stability, we have been able to find the particularly stable structures for binary Lennard-Jones clusters with up to 100 atoms for a range of Lennard-Jones parameters. In particular, we have shown that just having atoms of different size leads to a remarkable stabilization of polytetrahedral structures, i… ▽ More Using a global optimization approach that directly searches for the composition of greatest stability, we have been able to find the particularly stable structures for binary Lennard-Jones clusters with up to 100 atoms for a range of Lennard-Jones parameters. In particular, we have shown that just having atoms of different size leads to a remarkable stabilization of polytetrahedral structures, including both polyicosahedral clusters and at larger sizes structures with disclination lines. △ Less

Submitted 28 April, 2005; v1 submitted 27 April, 2005; originally announced April 2005.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 95, 063401 (2005)

Characterizing the network topology of the energy landscapes of atomic clusters

Authors: Jonathan P. K. Doye, Claire P. Massen

Abstract: By dividing potential energy landscapes into basins of attractions surrounding minima and linking those basins that are connected by transition state valleys, a network description of energy landscapes naturally arises. These networks are characterized in detail for a series of small Lennard-Jones clusters and show behaviour characteristic of small-world and scale-free networks. However, unlike… ▽ More By dividing potential energy landscapes into basins of attractions surrounding minima and linking those basins that are connected by transition state valleys, a network description of energy landscapes naturally arises. These networks are characterized in detail for a series of small Lennard-Jones clusters and show behaviour characteristic of small-world and scale-free networks. However, unlike many such networks, this topology cannot reflect the rules governing the dynamics of network growth, because they are static spatial networks. Instead, the heterogeneity in the networks stems from differences in the potential energy of the minima, and hence the hyperareas of their associated basins of attraction. The low-energy minima with large basins of attraction act as hubs in the network.Comparisons to randomized networks with the same degree distribution reveals structuring in the networks that reflects their spatial embedding. △ Less

Submitted 5 November, 2004; originally announced November 2004.

Comments: 14 pages, 11 figures

Journal ref: J. Chem. Phys. 122, 084105 (2005)

Lead clusters: different potentials, different structures

Authors: Jonathan P. K. Doye

Abstract: The lowest-energy structures of lead clusters interacting via a Gupta potential are obtained for N<151. Structures based on Marks decahedra dominate at the larger sizes. These results are very different from those obtained previously using a lead glue potential, and the origins of the differences are related back to differences in the potential. The lowest-energy structures of lead clusters interacting via a Gupta potential are obtained for N<151. Structures based on Marks decahedra dominate at the larger sizes. These results are very different from those obtained previously using a lead glue potential, and the origins of the differences are related back to differences in the potential. △ Less

Submitted 11 May, 2004; originally announced May 2004.

Comments: 6 pages, 4 figures, TAMC4 proceedings

Journal ref: Comp. Mater. Sci. 35, 227-231 (2006)

Inhibition of protein crystallization by evolutionary negative design

Authors: Jonathan P. K. Doye, Ard A. Louis, Michele Vendruscolo

Abstract: In this perspective we address the question: why are proteins seemingly so hard to crystallize? We suggest that this is because of evolutionary negative design, i.e. proteins have evolved not to crystallize, because crystallization, as with any type of protein aggregation, compromises the viability of the cell. There is much evidence in the literature that supports this hypothesis, including the… ▽ More In this perspective we address the question: why are proteins seemingly so hard to crystallize? We suggest that this is because of evolutionary negative design, i.e. proteins have evolved not to crystallize, because crystallization, as with any type of protein aggregation, compromises the viability of the cell. There is much evidence in the literature that supports this hypothesis, including the effect of mutations on the crystallizability of a protein, the correlations found in the properties of crystal contacts in bioinformatics databases, and the positive use of protein crystallization by bacteria and viruses. △ Less

Submitted 16 February, 2004; originally announced February 2004.

Comments: 5 pages

Journal ref: Physical Biology 1, P9-P13 (2004)

Comment on ``Strontium clusters: Many-body potential, energetics, and structural transitions'' [J. Chem. Phys. 115, 3640 (2001)]

Authors: Jonathan P. K. Doye, Florent Calvo

Abstract: Parallel tempering simulations for Sr_34 and Sr_61 indicate that, contrary to Wang et al.'s predictions [J. Chem. Phys. 115, 3640 (2001)], there are no solid-solid transitions for these clusters, in which symmetrical polytetrahedral structures become most stable. These results have implications for the structural interpretation of the magic numbers observed experimentally for strontium clusters. Parallel tempering simulations for Sr_34 and Sr_61 indicate that, contrary to Wang et al.'s predictions [J. Chem. Phys. 115, 3640 (2001)], there are no solid-solid transitions for these clusters, in which symmetrical polytetrahedral structures become most stable. These results have implications for the structural interpretation of the magic numbers observed experimentally for strontium clusters. △ Less

Submitted 3 September, 2003; originally announced September 2003.

Comments: 2 pages, 2 figures

Journal ref: J. Chem. Phys. 119, 12680-12681 (2003)

Identifying structural patterns in `disordered' metal clusters

Authors: Jonathan P. K. Doye

Abstract: Zinc and cadmium clusters interacting with a Gupta potential have previously been identified as prototypical metallic systems that exhibiting disordered cluster structures. Here, putative global minima of the potential energy have been located for these clusters for all sizes up to N<125. Although none of the usual structural forms are lowest in energy and many of the clusters have no overall or… ▽ More Zinc and cadmium clusters interacting with a Gupta potential have previously been identified as prototypical metallic systems that exhibiting disordered cluster structures. Here, putative global minima of the potential energy have been located for these clusters for all sizes up to N<125. Although none of the usual structural forms are lowest in energy and many of the clusters have no overall order, strong structural preferences have been identified.Many of the clusters are based on distorted oblate Marks decahedra, where the distortion involves the bringing together of atoms on either side of a re-entrant groove of the Marks decahedron. △ Less

Submitted 9 June, 2003; originally announced June 2003.

Comments: 12 pages; 5 figures

Journal ref: Phys. Rev. B 68, 195418 (2003)

A model metal potential exhibiting polytetrahedral clusters

Authors: Jonathan P. K. Doye

Abstract: Putative global minima have been located for clusters interacting with an aluminium glue potential for N<190. Virtually all the clusters have polytetrahedral structures, which for larger sizes involve an ordered array of disclinations that are similar to those in the Z, H and sigma Frank-Kasper phases. Comparisons of sequences of larger clusters suggest that the majority of the global minima wil… ▽ More Putative global minima have been located for clusters interacting with an aluminium glue potential for N<190. Virtually all the clusters have polytetrahedral structures, which for larger sizes involve an ordered array of disclinations that are similar to those in the Z, H and sigma Frank-Kasper phases. Comparisons of sequences of larger clusters suggest that the majority of the global minima will adopt the bulk face-centred-cubic structure beyond N=500. △ Less

Submitted 21 January, 2003; originally announced January 2003.

Comments: 14 pages, 7 figures

Journal ref: J. Chem. Phys., 119, 1136-1147 (2003)

Surface-reconstructed Icosahedral Structures for Lead Clusters

Authors: Shaun C. Hendy, Jonathan P. K. Doye

Abstract: We describe a new family of icosahedral structures for lead clusters. In general, structures in this family contain a Mackay icosahedral core with a reconstructed two-shell outer-layer. This family includes the anti-Mackay icosahedra, which have have a Mackay icosahedral core but with most of the surface atoms in hexagonal close-packed positions. Using a many-body glue potential for lead, we ide… ▽ More We describe a new family of icosahedral structures for lead clusters. In general, structures in this family contain a Mackay icosahedral core with a reconstructed two-shell outer-layer. This family includes the anti-Mackay icosahedra, which have have a Mackay icosahedral core but with most of the surface atoms in hexagonal close-packed positions. Using a many-body glue potential for lead, we identify two icosahedral structures in this family which have the lowest energies of any known structure in the size range from 900 to 15000 lead atoms. We show that these structures are stabilized by a feature of the many-body glue part of the interatomic potential. △ Less

Submitted 5 December, 2002; v1 submitted 23 July, 2002; originally announced July 2002.

Comments: 9 pages, 8 figures

Journal ref: Phys. Rev. B 66, 235402 (2002)

The structure of small lead clusters

Authors: Jonathan P. K. Doye, Shaun C. Hendy

Abstract: We have located the global minimum for all lead clusters with up to 160 atoms using a glue potential to model the interatomic interactions. The lowest-energy structures are not face-centred cubic as suggested previously. Rather, for N<40 the majority of structures are decahedral or hexagonal close-packed, and beyond this size the structures do not correspond to any of the structural forms common… ▽ More We have located the global minimum for all lead clusters with up to 160 atoms using a glue potential to model the interatomic interactions. The lowest-energy structures are not face-centred cubic as suggested previously. Rather, for N<40 the majority of structures are decahedral or hexagonal close-packed, and beyond this size the structures do not correspond to any of the structural forms commonly found in clusters. However, these latter clusters are not simply disordered. High symmetry, magic number clusters are still present, the most prominent of which is the 148-atom D3d hexagonal barrel. We relate these structural preferences back to the form of the interactions. △ Less

Submitted 17 July, 2002; originally announced July 2002.

Comments: 9 pages, 6 figures

Journal ref: Eur. Phys. J. D, 22, 99-107 (2003)

The favoured cluster structures of model glass formers

Authors: Jonathan P. K. Doye, David J. Wales, Fredrik H. M. Zetterling, Mikhail Dzugutov

Abstract: We examine the favoured cluster structures for two new potentials, which both behave as monatomic model glass-formers in bulk. We find that the oscillations in the interatomic potential lead to global minima that are non-compact arrangements of linked 13-atom icosahedra. We find that the structural properties of the clusters correlate with the glass-forming propensities of the potentials, and wi… ▽ More We examine the favoured cluster structures for two new potentials, which both behave as monatomic model glass-formers in bulk. We find that the oscillations in the interatomic potential lead to global minima that are non-compact arrangements of linked 13-atom icosahedra. We find that the structural properties of the clusters correlate with the glass-forming propensities of the potentials, and with the fragilities of the corresponding supercooled liquids. △ Less

Submitted 23 September, 2002; v1 submitted 17 May, 2002; originally announced May 2002.

Comments: 9 pages, 7 figures; new section added and error in potential parameters corrected

Journal ref: J. Chem. Phys. 118, 2792-2799 (2003)

The network topology of a potential energy landscape: A static scale-free network

Authors: Jonathan P. K. Doye

Abstract: Here we analyze the topology of the network formed by the minima and transition states on the potential energy landscape of small clusters. We find that this network has both a small-world and scale-free character. In contrast to other scale-free networks, where the topology results from the dynamics of the network growth, the potential energy landscape is a static entity. Therefore, a fundament… ▽ More Here we analyze the topology of the network formed by the minima and transition states on the potential energy landscape of small clusters. We find that this network has both a small-world and scale-free character. In contrast to other scale-free networks, where the topology results from the dynamics of the network growth, the potential energy landscape is a static entity. Therefore, a fundamentally different organizing principle underlies this behaviour: The potential energy landscape is highly heterogeneous with the low-energy minima having large basins of attraction and acting as the highly-connected hubs in the network. △ Less

Submitted 23 January, 2002; originally announced January 2002.

Comments: 4 pages, 4 figures, revtex4

Journal ref: Phys. Rev. Lett. 88, 238701 (2002)

Entropic effects on the structure of Lennard-Jones clusters

Authors: Jonathan P. K. Doye, Florent Calvo

Abstract: We examine in detail the causes of the structural transitions that occur for those small Lennard-Jones clusters that have a non-icosahedral global minima. Based on the principles learned from these examples we develop a method to construct structural phase diagrams that show in a coarse-grained manner how the equilibrium structure of large clusters depends on both size and temperature. The metho… ▽ More We examine in detail the causes of the structural transitions that occur for those small Lennard-Jones clusters that have a non-icosahedral global minima. Based on the principles learned from these examples we develop a method to construct structural phase diagrams that show in a coarse-grained manner how the equilibrium structure of large clusters depends on both size and temperature. The method can be augmented to account for anharmonicity and quantum effects. Our results illustrate that the vibrational entropy can play a crucial role in determining the equilibrium structure of a cluster. △ Less

Submitted 2 December, 2001; originally announced December 2001.

Comments: 13 pages, 9 figures

Journal ref: J. Chem. Phys. 116, 8307-8317 (2002)

Saddle Points and Dynamics of Lennard-Jones Clusters, Solids and Supercooled Liquids

Authors: Jonathan P. K. Doye, David J. Wales

Abstract: The properties of higher-index saddle points have been invoked in recent theories of the dynamics of supercooled liquids. Here we examine in detail a map** of configurations to saddle points using minimization of $|\nabla E|^2$, which has been used in previous work to support these theories. The examples we consider are a two-dimensional model energy surface and binary Lennard-Jones liquids an… ▽ More The properties of higher-index saddle points have been invoked in recent theories of the dynamics of supercooled liquids. Here we examine in detail a map** of configurations to saddle points using minimization of $|\nabla E|^2$, which has been used in previous work to support these theories. The examples we consider are a two-dimensional model energy surface and binary Lennard-Jones liquids and solids. A shortcoming of the map** is its failure to divide the potential energy surface into basins of attraction surrounding saddle points, because there are many minima of $|\nabla E|^2$ that do not correspond to stationary points of the potential energy. In fact, most liquid configurations are mapped to such points for the system we consider. We therefore develop an alternative route to investigate higher-index saddle points and obtain near complete distributions of saddles for small Lennard-Jones clusters. The distribution of the number of stationary points as a function of the index is found to be Gaussian, and the average energy increases linearly with saddle point index in agreement with previous results for bulk systems. △ Less

Submitted 9 November, 2001; v1 submitted 20 August, 2001; originally announced August 2001.

Comments: 14 pages, 7 figures

Journal ref: J. Chem. Phys. 116, 3777-3788 (2002)

Modelling the structure of clusters of C_60 molecules

Authors: Jonathan P. K. Doye, David J. Wales, Wolfgang Branz, Florent Calvo

Abstract: We locate putative global minima for (C_60)_N clusters modelled by the potential of Pacheco and Prates-Ramalho up to N=105. These minima are based on icosahedral packing up to N=15, but above this size the lowest-energy structures are decahedral or close-packed. Although structures based on the 98-molecule Leary tetrahedron, which have been inferred from experiment, are not lowest in energy for… ▽ More We locate putative global minima for (C_60)_N clusters modelled by the potential of Pacheco and Prates-Ramalho up to N=105. These minima are based on icosahedral packing up to N=15, but above this size the lowest-energy structures are decahedral or close-packed. Although structures based on the 98-molecule Leary tetrahedron, which have been inferred from experiment, are not lowest in energy for this potential, an examination of the energetics of a growth sequence leading to the Leary tetrahedron lends further support to the experimental assignments. An analysis of the potential energy surface topography and the thermodynamics of two example clusters indicates that the multiple-funnel topography is likely to have a strong influence on the dynamics of structure formation and that solid-solid transitions driven by differences in vibrational entropy are likely to be common. △ Less

Submitted 29 June, 2001; originally announced June 2001.

Comments: 13 pages, 8 figures

Journal ref: Phys. Rev. B 64, 235409 (2001)