-
Radiometric propulsion: Advancing with the order-of-magnitude enhancement through graphene aerogel-coated vanes
Authors:
Bo Peng,
Bingjun Zhu,
Danil Dmitriev,
Jun Zhang
Abstract:
Radiometer is a light-induced aerodynamic propulsive device under the rarefied gas environment, which holds great potential for the next-gen near-space flight. However, its practical applications are hindered by the weak propulsion forces on the conventional radiometer vanes. Herein, this material-aerodynamics cross-disciplinary study develops novel radiometer vanes with graphene aerogel coatings,…
▽ More
Radiometer is a light-induced aerodynamic propulsive device under the rarefied gas environment, which holds great potential for the next-gen near-space flight. However, its practical applications are hindered by the weak propulsion forces on the conventional radiometer vanes. Herein, this material-aerodynamics cross-disciplinary study develops novel radiometer vanes with graphene aerogel coatings, which for the first time realize an order of magnitude enhancement in radiometric propulsion. The improvement is manifested as up to 29.7 times faster rotation speed at a low pressure of 0.2 Pa, 13.8 times faster at the pressure (1.5 Pa) with maximum speeds, and 4 orders of magnitude broader operating pressure range (10E-4 - 10E2 Pa). Direct Simulation Monte Carlo calculations reveal that the outstanding performance is ascribed to the improved temperature gradient and gas-solid momentum transfer efficiency tailored by surface porous microstructures. Moreover, we demonstrate a stable and long-term levitation prototype under both 1 sun irradiation and a rarefied gas environment.
△ Less
Submitted 23 March, 2024; v1 submitted 24 December, 2023;
originally announced December 2023.
-
Polariton lasing in Mie-resonant perovskite nanocavity
Authors:
M. A. Masharin,
D. Khmelevskaia,
V. I. Kondratiev,
D. I. Markina,
A. D. Utyushev,
D. M. Dolgintsev,
A. D. Dmitriev,
V. A. Shahnazaryan,
A. P. Pushkarev,
F. Isik,
I. V. Iorsh,
I. A. Shelykh,
H. V. Demir,
A. K. Samusev,
S. V. Makarov
Abstract:
Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mir…
▽ More
Deeply subwavelength lasers (or nanolasers) are highly demanded for compact on-chip bioimaging and sensing at the nanoscale. One of the main obstacles for the development of single-particle nanolasers with all three dimensions shorter than the emitting wavelength in the visible range is the high lasing thresholds and the resulting overheating. Here we exploit exciton-polariton condensation and mirror-image Mie modes in a cuboid CsPbBr$_3$ nanoparticle to achieve coherent emission at the visible wavelength of around 0.53~$μ$m from its ultra-small ($\approx$0.007$μ$m$^3$ or $\approxλ^3$/20) semiconductor nanocavity. The polaritonic nature of the emission from the nanocavity localized in all three dimensions is proven by direct comparison with corresponding one-dimensional and two-dimensional waveguiding systems with similar material parameters. Such a deeply subwavelength nanolaser is enabled not only by the high values for exciton binding energy ($\approx$35 meV), refractive index ($>$2.5 at low temperature), and luminescence quantum yield of CsPbBr$_3$, but also by the optimization of polaritons condensation on the Mie resonances. Moreover, the key parameters for optimal lasing conditions are intermode free spectral range and phonons spectrum in CsPbBr$_3$, which govern polaritons condensation path. Such chemically synthesized colloidal CsPbBr$_3$ nanolasers can be easily deposited on arbitrary surfaces, which makes them a versatile tool for integration with various on-chip systems.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
The model of stress distribution in polymer electrolyte membrane
Authors:
Vadim V. Atrazhev,
Tatiana Yu. Astakhova,
Dmitry V. Dmitriev,
Nikolay S. Erikhman,
Vadim I. Sultanov,
Timothy Patterson,
Sergei F. Burlatsky
Abstract:
An analytical model of mechanical stress in a polymer electrolyte membrane (PEM) of a hydrogen/air fuel cell with porous Water Transfer Plates (WTP) is developed in this work. The model considers a mechanical stress in the membrane is a result of the cell load cycling under constant oxygen utilization. The load cycling causes the cycling of the inlet gas flow rate, which results in the membrane hy…
▽ More
An analytical model of mechanical stress in a polymer electrolyte membrane (PEM) of a hydrogen/air fuel cell with porous Water Transfer Plates (WTP) is developed in this work. The model considers a mechanical stress in the membrane is a result of the cell load cycling under constant oxygen utilization. The load cycling causes the cycling of the inlet gas flow rate, which results in the membrane hydration/dehydration close to the gas inlet. Hydration/dehydration of the membrane leads to membrane swelling/shrinking, which causes mechanical stress in the constrained membrane. Mechanical stress results in through-plane crack formation. Thereby, the mechanical stress in the membrane causes mechanical failure of the membrane, limiting fuel cell lifetime. The model predicts the stress in the membrane as a function of the cell geometry, membrane material properties and operation conditions. The model was applied for stress calculation in GORE-SELECT.
△ Less
Submitted 17 January, 2014;
originally announced January 2014.
-
A Mathematical Model for Predicting the Life of PEM Fuel Cell Membranes Subjected to Hydration Cycling
Authors:
S. F. Burlatsky,
M. Gummalla,
J. O'Neill,
V. V. Atrazhev,
A. N. Varyukhin,
D. V. Dmitriev,
N. S. Erikhman
Abstract:
Under typical PEM fuel cell operating conditions, part of membrane electrode assembly is subjected to humidity cycling due to variation of inlet gas RH and/or flow rate. Cyclic membrane hydration/dehydration would cause cyclic swelling/shrinking of the unconstrained membrane. In a constrained membrane, it causes cyclic stress resulting in mechanical failure in the area adjacent to the gas inlet. A…
▽ More
Under typical PEM fuel cell operating conditions, part of membrane electrode assembly is subjected to humidity cycling due to variation of inlet gas RH and/or flow rate. Cyclic membrane hydration/dehydration would cause cyclic swelling/shrinking of the unconstrained membrane. In a constrained membrane, it causes cyclic stress resulting in mechanical failure in the area adjacent to the gas inlet. A mathematical modeling framework for prediction of the lifetime of a PEM FC membrane subjected to hydration cycling is developed in this paper. The model predicts membrane lifetime as a function of RH cycling amplitude and membrane mechanical properties. The modeling framework consists of three model components: a fuel cell RH distribution model, a hydration/dehydration induced stress model that predicts stress distribution in the membrane, and a damage accrual model that predicts membrane life-time. Short descriptions of the model components along with overall framework are presented in the paper. The model was used for lifetime prediction of a GORE-SELECT membrane.
△ Less
Submitted 19 June, 2013;
originally announced June 2013.
-
The Dynamics of Platinum Precipitation in an Ion Exchange Membrane
Authors:
S. F. Burlatsky,
M. Gummalla,
V. V. Atrazhev,
D. V. Dmitriev,
N. Y. Kuzminyh,
N. S. Erikhman
Abstract:
Microscopy of polymer electrolyte membranes that have undergone operation under fuel cell conditions, have revealed a well defined band of platinum in the membrane. Here, we propose a physics based model that captures the mechanism of platinum precipitation in the polymer electrolyte membrane. While platinum is observed throughout the membrane, the preferential growth of platinum at the band of pl…
▽ More
Microscopy of polymer electrolyte membranes that have undergone operation under fuel cell conditions, have revealed a well defined band of platinum in the membrane. Here, we propose a physics based model that captures the mechanism of platinum precipitation in the polymer electrolyte membrane. While platinum is observed throughout the membrane, the preferential growth of platinum at the band of platinum is dependent on the electrochemical potential distribution in the membrane. In this paper, the location of the platinum band is calculated as a function of the gas concentration at the cathode and anode, gas diffusion coefficients and solubility constants of the gases in the membrane, which are functions of relative humidity. Under H2/N2 conditions the platinum band is located near the cathode-membrane interface, as the oxygen concentration in the cathode gas stream increases and/or the hydrogen concentration in the anode gas stream decreases, the band moves towards the anode. The model developed in this paper agrees with the set of experimental data on the platinum band location and the platinum particle distribution and size.
△ Less
Submitted 19 June, 2013;
originally announced June 2013.