-
Structure of liquid--vapor interfaces: perspectives from liquid state theory, large-scale simulations, and potential grazing-incidence X-ray diffraction
Authors:
Felix Höfling,
Siegfried Dietrich
Abstract:
Grazing-incidence X-ray diffraction (GIXRD) is a scattering technique which allows one to characterize the structure of fluid interfaces down to the molecular scale, including the measurement of the surface tension and of the interface roughness. However, the corresponding standard data analysis at non-zero wave numbers has been criticized as to be inconclusive because the scattering intensity is…
▽ More
Grazing-incidence X-ray diffraction (GIXRD) is a scattering technique which allows one to characterize the structure of fluid interfaces down to the molecular scale, including the measurement of the surface tension and of the interface roughness. However, the corresponding standard data analysis at non-zero wave numbers has been criticized as to be inconclusive because the scattering intensity is polluted by the unavoidable scattering from the bulk. Here we overcome this ambiguity by proposing a physically consistent model of the bulk contribution which is based on a minimal set of assumptions of experimental relevance. To this end, we derive an explicit integral expression for the background scattering, which can be determined numerically from the static structure factors of the coexisting bulk phases as independent input. Concerning the interpretation of GIXRD data inferred from computer simulations, we account also for the finite sizes of the bulk phases, which are unavoidable in simulations. The corresponding leading-order correction beyond the dominant contribution to the scattered intensity is revealed by asymptotic analysis, which is characterized by the competition between the linear system size and the X-ray penetration depth in the case of simulations. Specifically, we have calculated the expected GIXRD intensity for scattering at the planar liquid--vapor interface of Lennard-Jones fluids with truncated pair interactions via extensive, high-precision simulations. The reported data cover interfacial and bulk properties of fluid states along the whole liquid--vapor coexistence line. A sensitivity analysis demonstrates the robustness of our findings concerning the detailed definition of the mean interface position. We conclude that previous claims of an enhanced surface tension at mesoscopic scales are amenable to unambiguous tests via scattering experiments.
△ Less
Submitted 10 February, 2024; v1 submitted 10 November, 2023;
originally announced November 2023.
-
Structure of electrolyte solutions at non-uniformly charged surfaces on a variety of length scales
Authors:
Markus Bier,
Maximilian Mußotter,
S. Dietrich
Abstract:
The structures of dilute electrolyte solutions close to non-uniformly charged planar substrates are systematically studied within the entire spectrum of microscopic to macroscopic length scales by means of a unified classical density functional theory (DFT) approach. This is in contrast to previous investigations, which are applicable either to short or to long length scales. It turns out that int…
▽ More
The structures of dilute electrolyte solutions close to non-uniformly charged planar substrates are systematically studied within the entire spectrum of microscopic to macroscopic length scales by means of a unified classical density functional theory (DFT) approach. This is in contrast to previous investigations, which are applicable either to short or to long length scales. It turns out that interactions with microscopic ranges, e.g., due to the hard cores of the fluid molecules and ions, have negligible influence on the formation of non-uniform lateral structures of the electrolyte solutions. This partly justifies the Debye-Hückel approximation schemes applied in previous studies of that system. In general, a coupling between the lateral and the normal fluid structures leads to the phenomenology that, upon increasing the distance from the substrate, less details of the lateral non-uniformities contribute to the fluid structure, such that ultimately only large-scale surface features remain relevant. It can be expected that this picture also applies to other fluids characterized by several length scales.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Intrusion of liquids into liquid infused surfaces with nanoscale roughness
Authors:
Swarn Lata Singh,
Lothar Schimmele,
S. Dietrich
Abstract:
We present a theoretical study of the intrusion of an ambient liquid into pores of a nano-corrugated wall w. The pores are prefilled with a liquid lubricant which adheres to the walls of the pores more strongly than the ambient liquid. The two liquids are modeled as a binary mixture of two types of particles, A and B. The mixture can decompose into an A-rich(ambient) liquid, and a B-rich(lubricant…
▽ More
We present a theoretical study of the intrusion of an ambient liquid into pores of a nano-corrugated wall w. The pores are prefilled with a liquid lubricant which adheres to the walls of the pores more strongly than the ambient liquid. The two liquids are modeled as a binary mixture of two types of particles, A and B. The mixture can decompose into an A-rich(ambient) liquid, and a B-rich(lubricant) liquid. The wall attracts B particles more strongly than A particles. The ratio of w-A to w-B interaction strengths is changed to tune the contact angle $θ_{AB}$ formed by the A-rich/B-rich liquid interface between the two fluids and the corresponding planar wall. We use classical density functional theory, in order to capture the effects of microscopic details on the intrusion transition as a function of composition and pressure of the ambient liquid, for various values of $θ_{AB}$ and different pit sizes.
We also studied the reverse process in which a pore initially filled with the ambient liquid is refilled with the lubricant. For small $θ_{AB}$ ,there is no hysteresis. However, beyond a certain $θ_{AB}$, we find the presence of hysteresis, which increases with increasing $θ_{AB}$. The dependence of location of the intrusion on $θ_{AB}$ and on the pit size, qualitatively follows the corresponding shift of the capillary-coexistence line away from the bulk liquid-liquid coexistence line, as predicted by a macroscopic capillarity model. The quantitative discrepancies become larger for narrower cavities. For the considered geometry, macroscopic capillarity theory predicts an open hysteresis loop above a threshold value of $θ_{AB} = 54.7^\circ$. This threshold, however, shifts to much higher values if widths of the pores become smaller than roughly ten times the diameter of the fluid particles.
△ Less
Submitted 20 November, 2021;
originally announced November 2021.
-
Wafer-scale, full-coverage, acoustic self-limiting assembly of particles on flexible substrates
Authors:
Liang Zhao,
Bchara Sidnawi,
Jichao Fan,
Ruiyang Chen,
Thomas Scully,
Scott Dietrich,
Weilu Gao,
Qianhong Wu,
Bo Li
Abstract:
Self-limiting assembly of particles represents the state-of-the-art controllability in nanomanufacturing processes where the assembly stops at a designated stage1,2, providing a desirable platform for applications requiring delicate thickness control3-5. Most successes in self-limiting assembly are limited to self-assembled monolayers (SAM) of small molecules on inorganic, chemically homogeneous r…
▽ More
Self-limiting assembly of particles represents the state-of-the-art controllability in nanomanufacturing processes where the assembly stops at a designated stage1,2, providing a desirable platform for applications requiring delicate thickness control3-5. Most successes in self-limiting assembly are limited to self-assembled monolayers (SAM) of small molecules on inorganic, chemically homogeneous rigid substrates (e.g., Au and SiO2) through surface-interaction mechanisms6,7. Similar mechanisms, however, cannot achieve uniform assembly of particles on flexible polymer substrates8,9. The complex configurations and conformations of polymer chains create a surface with non-uniform distributions of chemical groups and phases. In addition, most assembly mechanisms require good solvent wettability, where many desirable but hard-to-wet particles and polymer substrates are excluded. Here, we demonstrate an acoustic self-limiting assembly of particles (ASAP) method to achieve wafer-scale, full-coverage, close-packed monolayers of hydrophobic particles on hydrophobic polymer substrates in aqueous solutions. We envision many applications in functional coatings and showcase its feasibility in structural coloration.
△ Less
Submitted 31 October, 2021;
originally announced November 2021.
-
Self-motility of an active particle induced by correlations in the surrounding solution
Authors:
Alvaro Domínguez,
M. N. Popescu,
C. M. Rohwer,
S. Dietrich
Abstract:
Current models of phoretic transport rely on molecular forces creating a "diffuse" particle-fluid interface. We investigate theoretically an alternative mechanism, in which a diffuse interface emerges solely due to a non-vanishing correlation length of the surrounding solution. This mechanism can drive self-motility of a chemically active particle. Numerical estimates indicate that the velocity ca…
▽ More
Current models of phoretic transport rely on molecular forces creating a "diffuse" particle-fluid interface. We investigate theoretically an alternative mechanism, in which a diffuse interface emerges solely due to a non-vanishing correlation length of the surrounding solution. This mechanism can drive self-motility of a chemically active particle. Numerical estimates indicate that the velocity can reach micrometers per second. The predicted phenomenology includes a bilinear dependence of the velocity on the activity and a possible double velocity reversal upon varying the correlation length.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
The role of counterions in ionic liquid crystals
Authors:
Hendrik Bartsch,
Markus Bier,
S. Dietrich
Abstract:
Previous theoretical studies of calamitic (i.e., rod-like) ionic liquid crystals (ILCs) based on an effective one-species model led to indications of a novel smectic-A phase with a layer spacing being much larger than the length of the mesogenic (i.e., liquid-crystal forming) ions. In order to rule out the possibility that this wide smectic-A phase is merely an artifact caused by the one-species a…
▽ More
Previous theoretical studies of calamitic (i.e., rod-like) ionic liquid crystals (ILCs) based on an effective one-species model led to indications of a novel smectic-A phase with a layer spacing being much larger than the length of the mesogenic (i.e., liquid-crystal forming) ions. In order to rule out the possibility that this wide smectic-A phase is merely an artifact caused by the one-species approximation, we investigate an extension which accounts explicitly for cations and anions in ILCs. Our present findings, obtained by grand canonical Monte Carlo simulations, show that the phase transitions between the isotropic and the smectic-A phases of the cation-anion system are in qualitative agreement with the effective one-species model used in the preceding studies. In particular, for ILCs with mesogenes (i.e., liquid-crystal forming species) carrying charged sites at their tips, the wide smectic-A phase forms, at low temperatures and within an intermediate density range, in between the isotropic and a hexagonal crystal phase. We find that in the ordinary smectic-A phase the spatial distribution of the counterions of the mesogens is approximately uniform, whereas in the wide smectic-A phase the small counterions accumulate in between the smectic layers. Due to this phenomenology the wide smectic-A phase could be interesting for applications which hinge on the presence of conductivity channels for mobile ions.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
Finite-size corrections for the static structure factor of a liquid slab with open boundaries
Authors:
Felix Höfling,
Siegfried Dietrich
Abstract:
The presence of a confining boundary can modify the local structure of a liquid markedly. In addition, small samples of finite size are known to exhibit systematic deviations of thermodynamic quantities relative to their bulk values. Here, we consider the static structure factor of a liquid sample in slab geometry with open boundaries at the surfaces, which can be thought of as virtually cutting o…
▽ More
The presence of a confining boundary can modify the local structure of a liquid markedly. In addition, small samples of finite size are known to exhibit systematic deviations of thermodynamic quantities relative to their bulk values. Here, we consider the static structure factor of a liquid sample in slab geometry with open boundaries at the surfaces, which can be thought of as virtually cutting out the sample from a macroscopically large, homogeneous fluid. This situation is a relevant limit for the interpretation of grazing-incidence diffraction experiments at liquid interfaces and films. We derive an exact, closed expression for the slab structure factor, with the bulk structure factor as the only input. This shows that such free boundary conditions cause significant differences between the two structure factors, in particular at small wavenumbers. An asymptotic analysis of this result yields the scaling exponent and an accurate, useful approximation of these finite-size corrections. Furthermore, the open boundaries permit the interpretation of the slab as an open system, supporting particle exchange with a reservoir. We relate the slab structure factor to the particle number fluctuations and discuss conditions under which the subvolume of the slab represents a grand canonical ensemble with chemical potential $μ$ and temperature $T$. Thus, the open slab serves as a test-bed for the small-system thermodynamics in a $μT$ reservoir. We provide a microscopically justified and exact result for the size dependence of the isothermal compressibility. Our findings are corroborated by simulation data for Lennard-Jones liquids at two representative temperatures.
△ Less
Submitted 10 June, 2020;
originally announced June 2020.
-
Floor- or ceiling-sliding for chemically active, gyrotactic, sedimenting Janus particles
Authors:
Sayan Das,
Zohreh Jalilvand,
Mihail N. Popescu,
William E. Uspal,
Siegfried Dietrich,
Ilona Kretzschmar
Abstract:
Surface bound catalytic chemical reactions self-propel chemically active Janus particles. In the vicinity of boundaries, these particles exhibit rich behavior, such as the occurrence of wall-bound steady states of "sliding". Most active particles tend to sediment as they are density mismatched with the solution. Moreover Janus spheres, which consist of an inert core material decorated with a cap-l…
▽ More
Surface bound catalytic chemical reactions self-propel chemically active Janus particles. In the vicinity of boundaries, these particles exhibit rich behavior, such as the occurrence of wall-bound steady states of "sliding". Most active particles tend to sediment as they are density mismatched with the solution. Moreover Janus spheres, which consist of an inert core material decorated with a cap-like, thin layer of a catalyst, are gyrotactic ("bottom-heavy"). Occurrence of sliding states near the horizontal walls depends on the interplay between the active motion and the gravity-driven sedimentation and alignment. It is thus important to understand and quantify the influence of these gravity-induced effects on the behavior of model chemically active particles moving near walls. For model gyrotactic, self-phoretic Janus particles, here we study theoretically the occurrence of sliding states at horizontal planar walls that are either below ("floor") or above ("ceiling") the particle. We construct "state diagrams" characterizing the occurrence of such states as a function of the sedimentation velocity and of the gyrotactic response of the particle, as well as of the phoretic mobility of the particle. We show that in certain cases sliding states may emerge simultaneously at both the ceiling and the floor, while the larger part of the experimentally relevant parameter space corresponds to particles that would exhibit sliding states only either at the floor or at the ceiling or there are no sliding states at all. These predictions are critically compared with the results of previous experimental studies and our experiments conducted on Pt-coated polystyrene and silica-core particles suspended in aqueous hydrogen peroxide solutions.
△ Less
Submitted 22 January, 2020;
originally announced February 2020.
-
Numerical simulations of self-diffusiophoretic colloids at fluid interfaces
Authors:
T. Peter,
P. Malgaretti,
N. Rivas,
A. Scagliarini,
J. Harting,
S. Dietrich
Abstract:
The dynamics of active colloids is very sensitive to the presence of boundaries and interfaces which therefore can be used to control their motion. Here we analyze the dynamics of active colloids adsorbed at a fluid-fluid interface. By using a mesoscopic numerical approach which relies on an approximated numerical solution of the Navier-Stokes equation, we show that when adsorbed at a fluid interf…
▽ More
The dynamics of active colloids is very sensitive to the presence of boundaries and interfaces which therefore can be used to control their motion. Here we analyze the dynamics of active colloids adsorbed at a fluid-fluid interface. By using a mesoscopic numerical approach which relies on an approximated numerical solution of the Navier-Stokes equation, we show that when adsorbed at a fluid interface, an active colloid experiences a net torque even in the absence of a viscosity contrast between the two adjacent fluids. In particular, we study the dependence of this torque on the contact angle of the colloid with the fluid-fluid interface and on its surface properties. We rationalize our results via an approximate approach which accounts for the appearance of a local friction coefficient. By providing insight into the dynamics of active colloids adsorbed at fluid interfaces, our results are relevant for two-dimensional self assembly and emulsion stabilization by means of active colloids.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Cassie-Wenzel transition of a binary liquid mixture on a nano-sculptured surface
Authors:
Swarn Lata Singh,
Lothar Schimmele,
S. Dietrich
Abstract:
The Cassie-Wenzel transition of a symmetric binary liquid mixture in contact with a nano-corrugated wall is studied. The corrugation consists of a periodic array of nano-pits with square cross sections. The substrate potential is the sum over Lennard-Jones interactions, describing the pairwise interaction between the wall particles $C$ and the fluid particles. The liquid is composed of two species…
▽ More
The Cassie-Wenzel transition of a symmetric binary liquid mixture in contact with a nano-corrugated wall is studied. The corrugation consists of a periodic array of nano-pits with square cross sections. The substrate potential is the sum over Lennard-Jones interactions, describing the pairwise interaction between the wall particles $C$ and the fluid particles. The liquid is composed of two species of particles, $A$ and $B$, which have the same size and equal $A - A$ and $B - B$ interactions. The liquid particles interact between each other also via $A - B$ Lennard-Jones potentials. We have employed classical density functional theory to determine the equilibrium structure of binary liquid mixtures in contact with the nano-corrugated surface. Liquid intrusion into the pits is studied as a function of various system parameters such as the composition of the liquid, the strengths of various inter-particle interactions, as well as the geometric parameters of the pits. The binary liquid mixture is taken to be at its mixed-liquid-vapor coexistence. For various sets of parameters the results obtained for the Cassie - Wenzel transition, as well as for the metastability of the two corresponding thermodynamic states, are compared with macroscopic predictions in order to check the range of validity of the macroscopic theories for systems exposed to nanoscopic confinements. Distinct from the macroscopic theory, it is found that the Cassie - Wenzel transition cannot be predicted based on the knowledge of a single parameter, such as the contact angle within the macroscopic theory.
△ Less
Submitted 30 October, 2019;
originally announced October 2019.
-
Dynamics of the critical Casimir force for a conserved order parameter after a critical quench
Authors:
Markus Gross,
Christian M. Rohwer,
S. Dietrich
Abstract:
Fluctuation-induced forces occur generically when long-ranged correlations (e.g., in fluids) are confined by external bodies. In classical systems, such correlations require specific conditions, e.g., a medium close to a critical point. On the other hand, long-ranged correlations appear more commonly in certain non-equilibrium systems with conservation laws. Consequently, a variety of non-equilibr…
▽ More
Fluctuation-induced forces occur generically when long-ranged correlations (e.g., in fluids) are confined by external bodies. In classical systems, such correlations require specific conditions, e.g., a medium close to a critical point. On the other hand, long-ranged correlations appear more commonly in certain non-equilibrium systems with conservation laws. Consequently, a variety of non-equilibrium fluctuation phenomena, including fluctuation-induced forces, have been discovered and explored recently. Here, we address a long-standing problem of non-equilibrium critical Casimir forces emerging after a quench to the critical point in a confined fluid with order-parameter-conserving dynamics and non-symmetry-breaking boundary conditions. The interplay of inherent (critical) fluctuations and dynamical non-local effects (due to density conservation) gives rise to striking features, including correlation functions and forces exhibiting oscillatory time-dependences. Complex transient regimes arise, depending on initial conditions and the geometry of the confinement. Our findings pave the way for exploring a wealth of non-equilibrium processes in critical fluids (e.g., fluctuation-mediated self-assembly or aggregation). In certain regimes, our results are applicable to active matter.
△ Less
Submitted 29 July, 2019; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Electrostatic interaction of particles trapped at fluid interfaces: Effects of geometry and wetting properties
Authors:
Arghya Majee,
Markus Bier,
S. Dietrich
Abstract:
The electrostatic interaction between pairs of spherical or macroscopically long, parallel cylindrical colloids trapped at fluid interfaces is studied theoretically for the case of small inter-particle separations. Starting from the effective interaction between two planar walls and by using the Derjaguin approximation, we address the issue of how the electrostatic interaction between such particl…
▽ More
The electrostatic interaction between pairs of spherical or macroscopically long, parallel cylindrical colloids trapped at fluid interfaces is studied theoretically for the case of small inter-particle separations. Starting from the effective interaction between two planar walls and by using the Derjaguin approximation, we address the issue of how the electrostatic interaction between such particles is influenced by their curvatures and by the wetting contact angle at their surfaces. Regarding the influence of curvature, our findings suggest that the discrepancies between linear and nonlinear Poisson-Boltzmann theory, which have been noticed before for planar walls, also occur for spheres and macroscopically long, parallel cylinders, though their magnitude depends on the wetting contact angle. Concerning the influence of the wetting contact angle $θ$ simple relations are obtained for equally sized particles which indicate that the inter-particle force varies significantly with $θ$ only within an interval around $90^\circ$. This interval depends on the Debye length of the fluids and on the size of the particles but not on their shape. For unequally sized particles, a more complicated relation is obtained for the variation of the inter-particle force with the wetting contact angle.
△ Less
Submitted 29 November, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
Surface-induced non-equilibrium dynamics and critical Casimir forces for model B in film geometry
Authors:
Markus Gross,
Andrea Gambassi,
S. Dietrich
Abstract:
Using analytic and numerical approaches, we study the spatio-temporal evolution of a conserved order parameter of a fluid in film geometry, following an instantaneous quench to the critical temperature $T_c$ as well as to supercritical temperatures. The order parameter dynamics is chosen to be governed by model B within mean field theory and is subject to no-flux boundary conditions as well as to…
▽ More
Using analytic and numerical approaches, we study the spatio-temporal evolution of a conserved order parameter of a fluid in film geometry, following an instantaneous quench to the critical temperature $T_c$ as well as to supercritical temperatures. The order parameter dynamics is chosen to be governed by model B within mean field theory and is subject to no-flux boundary conditions as well as to symmetric surface fields at the confining walls. The latter give rise to critical adsorption of the order parameter at both walls and provide the driving force for the non-trivial time evolution of the order parameter. During the dynamics, the order parameter is locally and globally conserved; thus, at thermal equilibrium, the system represents the canonical ensemble. We furthermore consider the dynamics of the nonequilibrium critical Casimir force, which we obtain based on the generalized force exerted by the order parameter field on the confining walls. We identify various asymptotic regimes concerning the time evolution of the order parameter and the critical Casimir force and we provide, within our approach, exact expressions of the corresponding dynamic scaling functions.
△ Less
Submitted 22 September, 2018; v1 submitted 22 June, 2018;
originally announced June 2018.
-
Effective squirmer models for self-phoretic chemically active spherical colloids
Authors:
M. N. Popescu,
W. E. Uspal,
Z. Eskandari,
M. Tasinkevych,
S. Dietrich
Abstract:
Various aspects of self-motility of chemically active colloids in Newtonian fluids can be captured by simple models for their chemical activity plus a phoretic slip hydrodynamic boundary condition on their surface. For particles of simple shapes (e.g., spheres) -- as employed in many experimental studies -- which move at very low Reynolds numbers in an unbounded fluid, such models of chemically ac…
▽ More
Various aspects of self-motility of chemically active colloids in Newtonian fluids can be captured by simple models for their chemical activity plus a phoretic slip hydrodynamic boundary condition on their surface. For particles of simple shapes (e.g., spheres) -- as employed in many experimental studies -- which move at very low Reynolds numbers in an unbounded fluid, such models of chemically active particles effectively map onto the well studied so-called hydrodynamic squirmers [S. Michelin and E. Lauga, J. Fluid Mech. \textbf{747}, 572 (2014)]. Accordingly, intuitively appealing analogies of "pusher/puller/neutral" squirmers arise naturally. Within the framework of self-diffusiophoresis we illustrate the above mentioned map** and the corresponding flows in an unbounded fluid for a number of choices of the activity function (i.e., the spatial distribution and the type of chemical reactions across the surface of the particle). We use the central collision of two active particles as a simple, paradigmatic case for demonstrating that in the presence of other particles or boundaries the behavior of chemically active colloids may be \textit{qualitatively} different, even in the far field, from the one exhibited by the corresponding "effective squirmer", obtained from the map** in an unbounded fluid. This emphasizes that understanding the collective behavior and the dynamics under geometrical confinement of chemically active particles necessarily requires to explicitly account for the dependence of the hydrodynamic interactions on the distribution of chemical species resulting from the activity of the particles.
△ Less
Submitted 6 April, 2018;
originally announced April 2018.
-
Probing microscopic models for system-bath interactions via parametric driving
Authors:
Anastasia S. D. Dietrich,
Martin Kiffner,
Dieter Jaksch
Abstract:
We show that strong parametric driving of a quantum harmonic oscillator coupled to a thermal bath allows one to distinguish between different microscopic models for the oscillator-bath coupling. We consider a bath with an Ohmic spectral density and a model where the system-bath interaction can be tuned continuously between position and momentum coupling via the coupling angle $α$. We derive a mast…
▽ More
We show that strong parametric driving of a quantum harmonic oscillator coupled to a thermal bath allows one to distinguish between different microscopic models for the oscillator-bath coupling. We consider a bath with an Ohmic spectral density and a model where the system-bath interaction can be tuned continuously between position and momentum coupling via the coupling angle $α$. We derive a master equation for the reduced density operator of the oscillator in Born-Markov approximation and investigate its quasi-steady state as a function of the driving parameters, the temperature of the bath and the coupling angle $α$. We find that the time-averaged variance of position and momentum exhibits a strong dependence on these parameters. In particular, we identify parameter regimes that maximise the $α$-dependence and provide an intuitive explanation of our results.
△ Less
Submitted 21 March, 2018;
originally announced March 2018.
-
Shape-dependent guidance of active Janus particles by chemically patterned surfaces
Authors:
W. E. Uspal,
M. N. Popescu,
M. Tasinkevych,
S. Dietrich
Abstract:
Self-phoretic Janus particles move by inducing -- via non-equilibrium chemical reactions occurring on their surfaces -- changes in the chemical composition of the solution in which they are immersed. This process leads to gradients in chemical composition along the surface of the particle, as well as along any nearby boundaries, including solid walls. Chemical gradients along a wall can give rise…
▽ More
Self-phoretic Janus particles move by inducing -- via non-equilibrium chemical reactions occurring on their surfaces -- changes in the chemical composition of the solution in which they are immersed. This process leads to gradients in chemical composition along the surface of the particle, as well as along any nearby boundaries, including solid walls. Chemical gradients along a wall can give rise to chemi-osmosis, i.e., the gradients drive surface flows which, in turn, drive flow in the volume of the solution. This bulk flow couples back to the particle, and thus contributes to its self-motility. Since chemi-osmosis strongly depends on the molecular interactions between the diffusing molecular species and the wall, the response flow induced and experienced by a particle encodes information about any chemical patterning of the wall. Here, we extend previous studies on self-phoresis of a sphere near a chemically patterned wall to the case of particles with elongated shape. We focus our analysis on the new phenomenology potentially emerging from the coupling -- which is inoperative for a spherical shape -- of the elongated particle to the strain rate tensor of the chemi-osmotic flow. Via numerical calculations, we show that the dynamics of a rod-like particle exhibits a novel "edge-following" steady state: the particle translates along the edge of a chemical step at a steady distance from the step and with a steady orientation. Within a certain range of system parameters, the edge-following state co-exists with a "docking" state (the particle stops at the step, oriented perpendicular to the step edge), i.e., a bistable dynamics occurs. These findings are rationalized as a consequence of the competition between fluid vorticity and the rate of strain by using analytical theory based on the point-particle approximation which captures quasi-quantitatively the dynamics of the system.
△ Less
Submitted 29 November, 2017;
originally announced November 2017.
-
Smectic phases in ionic liquid crystals
Authors:
Hendrik Bartsch,
Markus Bier,
Siegfried Dietrich
Abstract:
Ionic liquid crystals (ILCs) are anisotropic mesogenic molecules which carry charges and therefore combine properties of liquid crystals, e.g., the formation of mesophases, and of ionic liquids, such as low melting temperatures and tiny triple-point pressures. Previous density functional calculations have revealed that the phase behavior of ILCs is strongly affected by their molecular properties,…
▽ More
Ionic liquid crystals (ILCs) are anisotropic mesogenic molecules which carry charges and therefore combine properties of liquid crystals, e.g., the formation of mesophases, and of ionic liquids, such as low melting temperatures and tiny triple-point pressures. Previous density functional calculations have revealed that the phase behavior of ILCs is strongly affected by their molecular properties, i.e., their aspect ratio, the loci of the charges, and their interaction strengths. Here, we report new findings concerning the phase behavior of ILCs as obtained by density functional theory and Monte Carlo simulations. The most important result is the occurrence of a novel, wide smectic-A phase $S_{AW}$, at low temperature, the layer spacing of which is larger than that of the ordinary high-temperature smectic-A phase $S_{A}$. Unlike the ordinary smectic $S_A$ phase, the structure of the $S_{AW}$ phase consists of alternating layers of particles oriented parallel to the layer normal and oriented perpendicular to it.
△ Less
Submitted 28 October, 2017; v1 submitted 24 August, 2017;
originally announced August 2017.
-
Terahertz field control of interlayer transport modes in cuprate superconductors
Authors:
Frank Schlawin,
Anastasia S. D. Dietrich,
Martin Kiffner,
Andrea Cavalleri,
Dieter Jaksch
Abstract:
We theoretically show that terahertz pulses with controlled amplitude and frequency can be used to switch between stable transport modes in layered superconductors, modelled as stacks of Josephson junctions. We find pulse shapes that deterministically switch the transport mode between superconducting, resistive and solitonic states. We develop a simple model that explains the switching mechanism a…
▽ More
We theoretically show that terahertz pulses with controlled amplitude and frequency can be used to switch between stable transport modes in layered superconductors, modelled as stacks of Josephson junctions. We find pulse shapes that deterministically switch the transport mode between superconducting, resistive and solitonic states. We develop a simple model that explains the switching mechanism as a destablization of the centre of mass excitation of the Josephson phase, made possible by the highly non-linear nature of the light-matter coupling.
△ Less
Submitted 24 July, 2017;
originally announced July 2017.
-
Statistical field theory with constraints: application to critical Casimir forces in the canonical ensemble
Authors:
Markus Gross,
Andrea Gambassi,
S. Dietrich
Abstract:
The effect of imposing a constraint on a fluctuating scalar order parameter field in a system of finite volume is studied within statistical field theory. The canonical ensemble, corresponding to a fixed total integrated order parameter, is obtained as a special case of the theory. A perturbative expansion is developed which allows one to systematically determine the constraint-induced finite-volu…
▽ More
The effect of imposing a constraint on a fluctuating scalar order parameter field in a system of finite volume is studied within statistical field theory. The canonical ensemble, corresponding to a fixed total integrated order parameter, is obtained as a special case of the theory. A perturbative expansion is developed which allows one to systematically determine the constraint-induced finite-volume corrections to the free energy and to correlation functions. In particular, we focus on the Landau-Ginzburg model in a film geometry (i.e., a rectangular parallelepiped with a small aspect ratio) with periodic, Dirichlet, or Neumann boundary conditions in the transverse direction and periodic boundary conditions in the remaining, lateral directions. Within the expansion in terms of $ε=4-d$, where $d$ is the spatial dimension of the bulk, the finite-size contribution to the free energy and the associated critical Casimir force are calculated to leading order in $ε$ and are compared to the corresponding expressions for an unconstrained (grand canonical) system. The constraint restricts the fluctuations within the system and it accordingly modifies the residual finite-size free energy. The resulting Casimir force is shown to depend on whether it is defined by assuming a fixed transverse area or a fixed total volume. In the former case, the constraint is typically found to significantly enhance the attractive character of the force as compared to the grand canonical case. In contrast to the grand canonical Casimir force, which, for supercritical temperatures, vanishes in the limit of thick films, the canonical Casimir force defined for fixed transverse area attains for thick films a negative value for all boundary conditions studied here. Typically, the dependence of the Casimir force both on the temperature- and on the field-like scaling variables is different in the two ensembles.
△ Less
Submitted 16 August, 2017; v1 submitted 31 May, 2017;
originally announced May 2017.
-
Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients
Authors:
M. N. Popescu,
W. E. Uspal,
S. Dietrich
Abstract:
Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g., the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to…
▽ More
Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g., the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate "point-particle" analysis, we show analytically that -- owing to this kind of induced active response (chemi-osmosis) of the wall -- such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial "swimmers" exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change in the environment. We show that the alignment with the surface-chemistry gradient is generic for chemically active colloids as long as they exhibit motility in an unbounded fluid, i.e., this phenomenon does not depend on the exact details of the propulsion mechanism. The results are discussed in the context of simple models of chemical activity, corresponding to Janus particles with "source" chemical reactions on one half of the surface and either "inert" or "sink" reactions over the other half.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Poisson-Boltzmann study of the effective electrostatic interaction between colloids at an electrolyte interface
Authors:
Arghya Majee,
Markus Bier,
S. Dietrich
Abstract:
The effective electrostatic interaction between a pair of colloids, both of them located close to each other at an electrolyte interface, is studied by employing the full, nonlinear Poisson-Boltzmann (PB) theory within classical density functional theory. Using a simplified yet appropriate model, all contributions to the effective interaction are obtained exactly, albeit numerically. The compariso…
▽ More
The effective electrostatic interaction between a pair of colloids, both of them located close to each other at an electrolyte interface, is studied by employing the full, nonlinear Poisson-Boltzmann (PB) theory within classical density functional theory. Using a simplified yet appropriate model, all contributions to the effective interaction are obtained exactly, albeit numerically. The comparison between our results and those obtained within linearized PB theory reveals that the latter overestimates these contributions significantly at short inter-particle separations. Whereas the surface contributions to the linear and the nonlinear PB results differ only quantitatively, the line contributions show qualitative differences at short separations. Moreover, a dependence of the line contribution on the solvation properties of the two adjacent fluids is found, which is absent within the linear theory. Our results are expected to enrich the understanding of effective interfacial interactions between colloids.
△ Less
Submitted 2 August, 2016; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Enhanced detection of terrestrial gamma-ray flashes by AGILE
Authors:
M. Marisaldi,
A. Argan,
A. Ursi,
T. Gjesteland,
F. Fuschino,
C. Labanti,
M. Galli,
M. Tavani,
C. Pittori,
F. Verrecchia,
F. D'Amico,
N. Østgaard,
S. Mereghetti,
R. Campana,
P. W. Cattaneo,
A. Bulgarelli,
S. Colafrancesco,
S. Dietrich,
F. Longo,
F. Gianotti,
P. Giommi,
A. Rappoldi,
M. Trifoglio,
A. Trois
Abstract:
At the end of March 2015 the onboard software configuration of the AGILE satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configur…
▽ More
At the end of March 2015 the onboard software configuration of the AGILE satellite was modified in order to disable the veto signal of the anticoincidence shield for the minicalorimeter instrument. The motivation for such a change was the understanding that the dead time induced by the anticoincidence prevented the detection of a large fraction of Terrestrial Gamma-Ray Flashes (TGFs). The configuration change was highly successful resulting in an increase of one order of magnitude in TGF detection rate. As expected, the largest fraction of the new events has short duration ($< 100 \mathrm {μs}$), and part of them has simultaneous association with lightning sferics detected by the World Wide Lightning Location Network (WWLLN). The new configuration provides the largest TGF detection rate surface density (TGFs/$\mathrm{km^2}$/year) to date, opening prospects for improved correlation studies with lightning and atmospheric parameters on short spatial and temporal scales along the equatorial region.
△ Less
Submitted 25 May, 2016;
originally announced May 2016.
-
Guiding catalytically active particles with chemically patterned surfaces
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
Catalytically active Janus particles suspended in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diff…
▽ More
Catalytically active Janus particles suspended in solution create gradients in the chemical composition of the solution along their surfaces, as well as along any nearby container walls. The former leads to self-phoresis, while the latter gives rise to chemi-osmosis, providing an additional contribution to self-motility. Chemi-osmosis strongly depends on the molecular interactions between the diffusing chemical species and the wall. We show analytically, using an approximate "point-particle" approach, that by chemically patterning a planar substrate one can direct the motion of Janus particles: the induced chemi-osmotic flows can cause particles to either "dock" at the chemical step between the two materials, or to follow a chemical stripe. These theoretical predictions are confirmed by full numerical calculations. Generically, docking occurs for particles which tend to move away from their catalytic caps, while stripe-following occurs in the opposite case. Our analysis reveals the physical mechanisms governing this behavior.
△ Less
Submitted 21 September, 2016; v1 submitted 13 May, 2016;
originally announced May 2016.
-
Critical adsorption and critical Casimir forces in the canonical ensemble
Authors:
Markus Gross,
Oleg Vasilyev,
Andrea Gambassi,
S. Dietrich
Abstract:
Critical properties of a liquid film between two planar walls are investigated in the canonical ensemble, within which the total number of particles, rather than their chemical potential, is kept constant. The effect of this constraint is analyzed within mean field theory (MFT) based on a Ginzburg-Landau free energy functional as well as via Monte Carlo simulations of the 3D Ising model with fixed…
▽ More
Critical properties of a liquid film between two planar walls are investigated in the canonical ensemble, within which the total number of particles, rather than their chemical potential, is kept constant. The effect of this constraint is analyzed within mean field theory (MFT) based on a Ginzburg-Landau free energy functional as well as via Monte Carlo simulations of the 3D Ising model with fixed total magnetization. Within MFT and for finite adsorption strengths at the walls, the thermodynamic properties of the film in the canonical ensemble can be mapped exactly onto a grand canonical ensemble in which the corresponding chemical potential plays the role of the Lagrange multiplier associated with the constraint. However, due to a non-integrable divergence of the mean field order parameter profile near a wall, the limit of infinitely strong adsorption turns out to be not well-defined within MFT, because it would necessarily violate the constraint. The critical Casimir force (CCF) acting on the two planar walls of the film is generally found to behave differently in the canonical and grand canonical ensembles. For instance, the canonical CCF in the presence of equal preferential adsorption at the two walls is found to have the opposite sign and a slower decay behavior as a function of the film thickness compared to its grand canonical counterpart. We derive the stress tensor in the canonical ensemble and find that it has the same expression as in the grand canonical case, but with the chemical potential playing the role of the Lagrange multiplier associated with the constraint. The different behavior of the CCF in the two ensembles is rationalized within MFT by showing that, for a prescribed value of the thermodynamic control parameter of the film, i.e., density or chemical potential, the film pressures are identical in the two ensembles, while the corresponding bulk pressures are not.
△ Less
Submitted 1 August, 2016; v1 submitted 29 March, 2016;
originally announced March 2016.
-
Active colloids at fluid interfaces
Authors:
P. Malgaretti,
M. N. Popescu,
S. Dietrich
Abstract:
If an active Janus particle is trapped at the interface between a liquid and a fluid, its self-propelled motion along the interface is affected by a net torque on the particle due to the viscosity contrast between the two adjacent fluid phases. For a simple model of an active, spherical Janus colloid we analyze the conditions under which translation occurs along the interface and we provide estima…
▽ More
If an active Janus particle is trapped at the interface between a liquid and a fluid, its self-propelled motion along the interface is affected by a net torque on the particle due to the viscosity contrast between the two adjacent fluid phases. For a simple model of an active, spherical Janus colloid we analyze the conditions under which translation occurs along the interface and we provide estimates of the corresponding persistence length. We show that under certain conditions the persistence length of such a particle is significantly larger than the corresponding one in the bulk liquid, which is in line with the trends observed in recent experimental studies.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
Nonadditivity of Critical Casimir Forces
Authors:
Sathyanarayana Paladugu,
Agnese Callegari,
Yazgan Tuna,
Lukas Barth,
Siegfried Dietrich,
Andrea Gambassi,
Giovanni Volpe
Abstract:
In soft and condensed matter physics, effective interactions often emerge as a result of the spatial confinement of a fluctuating field. For instance, microscopic particles in a binary liquid mixture are subject to critical Casimir forces whenever their surfaces confine the thermal fluctuations of the order parameter of this kind of solvent, the range of which diverges upon approaching the critica…
▽ More
In soft and condensed matter physics, effective interactions often emerge as a result of the spatial confinement of a fluctuating field. For instance, microscopic particles in a binary liquid mixture are subject to critical Casimir forces whenever their surfaces confine the thermal fluctuations of the order parameter of this kind of solvent, the range of which diverges upon approaching the critical demixing point. Critical Casimir forces are predicted to be nonadditive on a particular large scale. However, a direct experimental evidence of this fact is still lacking. Here, we fill in this gap by reporting the experimental measurement of the associated many-body effects. In particular, we focus on three colloidal particles in optical traps and observe that the critical Casimir force exerted on one of them by the other two colloids differs from the sum of the forces they exert separately. The magnitude and range of this three-body effect turn out to depend sensitively on the distance from the critical point of the solvent and on the preferential adsorption at the surfaces of the colloids for the two components of the mixture.
△ Less
Submitted 9 November, 2015;
originally announced November 2015.
-
Rheotaxis of spherical active particles near a planar wall
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
For active particles the interplay between the self-generated hydrodynamic flow and an external shear flow, especially near bounding surfaces, can result in a rich behavior of the particles not easily foreseen from the consideration of the active and external driving mechanisms in isolation. For instance, under certain conditions, the particles exhibit "rheotaxis," i.e., they align their direction…
▽ More
For active particles the interplay between the self-generated hydrodynamic flow and an external shear flow, especially near bounding surfaces, can result in a rich behavior of the particles not easily foreseen from the consideration of the active and external driving mechanisms in isolation. For instance, under certain conditions, the particles exhibit "rheotaxis," i.e., they align their direction of motion with the plane of shear spanned by the direction of the flow and the normal of the bounding surface and move with or against the flow. To date, studies of rheotaxis have focused on elongated particles (e.g., spermatozoa), for which rheotaxis can be understood intuitively in terms of a "weather vane" mechanism. Here we investigate the possibility that spherical active particles, for which the "weather vane" mechanism is excluded due to the symmetry of the shape, may nevertheless exhibit rheotaxis. Combining analytical and numerical calculations, we show that, for a broad class of spherical active particles, rheotactic behavior may emerge via a mechanism which involves "self-trap**" near a hard wall owing to the active propulsion of the particles, combined with their rotation, alignment, and "locking" of the direction of motion into the shear plane. In this state, the particles move solely up- or downstream at a steady height and orientation.
△ Less
Submitted 8 March, 2016; v1 submitted 16 February, 2015;
originally announced February 2015.
-
Self-propulsion of a catalytically active particle near a planar wall: from reflection to sliding and hovering
Authors:
W. E. Uspal,
M. N. Popescu,
S. Dietrich,
M. Tasinkevych
Abstract:
Micron-sized particles moving through solution in response to self-generated chemical gradients serve as model systems for studying active matter. Their far-reaching potential applications will require the particles to sense and respond to their local environment in a robust manner. The self-generated hydrodynamic and chemical fields, which induce particle motion, probe and are modified by that ve…
▽ More
Micron-sized particles moving through solution in response to self-generated chemical gradients serve as model systems for studying active matter. Their far-reaching potential applications will require the particles to sense and respond to their local environment in a robust manner. The self-generated hydrodynamic and chemical fields, which induce particle motion, probe and are modified by that very environment, including confining boundaries. Focusing on a catalytically active Janus particle as a paradigmatic example, we predict that near a hard planar wall such a particle exhibits several scenarios of motion: reflection from the wall, motion at a steady-state orientation and height above the wall, or motionless, steady "hovering." Concerning the steady states, the height and the orientation are determined both by the proportion of catalyst coverage and the interactions of the solutes with the different "faces" of the particle. Accordingly, we propose that a desired behavior can be selected by tuning these parameters via a judicious design of the particle surface chemistry.
△ Less
Submitted 8 March, 2016; v1 submitted 11 July, 2014;
originally announced July 2014.
-
Electrostatic interaction between colloidal particles trapped at an electrolyte interface
Authors:
Arghya Majee,
Markus Bier,
S. Dietrich
Abstract:
The electrostatic interaction between colloidal particles trapped at the interface between two immiscible electrolyte solutions is studied in the limit of small inter-particle distances. Within an appropriate model exact analytic expressions for the electrostatic potential as well as for the surface and line interaction energies are obtained. They demonstrate that the widely used superposition app…
▽ More
The electrostatic interaction between colloidal particles trapped at the interface between two immiscible electrolyte solutions is studied in the limit of small inter-particle distances. Within an appropriate model exact analytic expressions for the electrostatic potential as well as for the surface and line interaction energies are obtained. They demonstrate that the widely used superposition approximation, which is commonly applied to large distances between the colloidal particles, fails qualitatively at small distances and is quantitatively unreliable even at large distances. Our results contribute to an improved description of the interaction between colloidal particles trapped at fluid interfaces.
△ Less
Submitted 27 February, 2014;
originally announced February 2014.
-
Nonequilibrium critical Casimir interactions in binary fluids
Authors:
Akira Furukawa,
Andrea Gambassi,
Siegfried Dietrich,
Hajime Tanaka
Abstract:
Colloids immersed in a critical binary liquid mixture are subject to critical Casimir forces (CCFs) because they confine its concentration fluctuations and influence the latter via effective surface fields. To date, CCFs have only been studied in thermodynamic equilibrium. However, due to the critical slowing down, the order parameter around a particle can easily be perturbed by any motion of the…
▽ More
Colloids immersed in a critical binary liquid mixture are subject to critical Casimir forces (CCFs) because they confine its concentration fluctuations and influence the latter via effective surface fields. To date, CCFs have only been studied in thermodynamic equilibrium. However, due to the critical slowing down, the order parameter around a particle can easily be perturbed by any motion of the colloid or by solvent flow. This leads to significant but largely unexplored changes in the CCF. Here we study the drag force on a single colloidal particle moving in a near-critical fluid mixture and the relative motion of two colloids due to the CCF acting on them. In order to account for the kinetic couplings among the order parameter field, the solvent velocity field, and the particle motion, we use a fluid particle dynamics method. These studies extend the understanding of CCFs from thermal equilibrium to non-equilibrium processes, which are relevant to current experiments, and show the emergence of significant effects near the critical point.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.
-
Local theory for ions in binary liquid mixtures
Authors:
Markus Bier,
Andrea Gambassi,
S. Dietrich
Abstract:
The influence of ions on the bulk phase behavior of binary liquid mixtures acting as their solvents and on the corresponding interfacial structures close to a planar wall is investigated by means of density functional theory based on local descriptions of the effective interactions between ions and their solvents. The bilinear coupling approximation (BCA), which has been used in numerous previous…
▽ More
The influence of ions on the bulk phase behavior of binary liquid mixtures acting as their solvents and on the corresponding interfacial structures close to a planar wall is investigated by means of density functional theory based on local descriptions of the effective interactions between ions and their solvents. The bilinear coupling approximation (BCA), which has been used in numerous previous related investigations, is compared with a novel local density approximation (LDA) for the ion-solvent interactions. It turns out that within BCA the bulk phase diagrams, the two-point correlation functions, and critical adsorption exhibit qualitative features which are not compatible with the available experimental data. These discrepancies do not occur within the proposed LDA. Further experimental investigations are suggested which assess the reliability of the proposed LDA. This approach allows one to obtain a consistent and rather general understanding of the effects of ions on solvent properties. From our analysis we infer in particular that there can be an experimentally detectable influence of ions on binary liquid mixtures due to steric effects but not due to charge effects.
△ Less
Submitted 6 July, 2012; v1 submitted 27 April, 2012;
originally announced April 2012.
-
Micro- and nanoscale fluid flow on chemical channels
Authors:
Fabian Dörfler,
Markus Rauscher,
Joel Koplik,
Jens Harting,
S. Dietrich
Abstract:
We study the time evolution and driven motion of thin liquid films lying on top of chemical patterns on a substrate. Lattice-Boltzmann and molecular dynamics methods are used for simulations of the flow of microscopic and nanoscopic films, respectively. Minimization of fluid surface area is used to examine the corresponding equilibrium free energy landscapes. The focus is on motion across patterns…
▽ More
We study the time evolution and driven motion of thin liquid films lying on top of chemical patterns on a substrate. Lattice-Boltzmann and molecular dynamics methods are used for simulations of the flow of microscopic and nanoscopic films, respectively. Minimization of fluid surface area is used to examine the corresponding equilibrium free energy landscapes. The focus is on motion across patterns containing diverging and converging flow junctions, with an eye towards applications to lab-on-a-chip devices. Both open liquid-vapor systems driven by body forces and confined liquid-liquid systems driven by boundary motion are considered. As in earlier studies of flow on a linear chemical channel, we observe continuous motion of a connected liquid film across repeated copies of the pattern, despite the appearance of pearling instabilities of the interface. Provided that the strength of the driving force and the volume of liquid are not too large, the liquid is confined to the chemical channels and its motion can be directed by small variations in the geometry of the pattern.
△ Less
Submitted 3 April, 2012;
originally announced April 2012.
-
Pulling and Pushing a Cargo With a Catalytically Active Carrier
Authors:
M. N. Popescu,
M. Tasinkevych,
S. Dietrich
Abstract:
Catalytically active particles suspended in a liquid can move due to self-phoresis by generating solute gradients via chemical reactions of the solvent occurring at parts of their surface. Such particles can be used as carriers at the micro-scale. As a simple model for a carrier-cargo system we consider a catalytically active particle connected by a thin rigid rod to a catalytically inert cargo pa…
▽ More
Catalytically active particles suspended in a liquid can move due to self-phoresis by generating solute gradients via chemical reactions of the solvent occurring at parts of their surface. Such particles can be used as carriers at the micro-scale. As a simple model for a carrier-cargo system we consider a catalytically active particle connected by a thin rigid rod to a catalytically inert cargo particle. We show that the velocity of the composite strongly depends on the relative orientation of the carrier-cargo link. Accordingly, there is an optimal configuration for the linkage. The subtlety of such carriers is underscored by the observation that a spherical particle completely covered by catalyst, which is motionless when isolated, acts as a carrier once attached to a cargo.
△ Less
Submitted 31 May, 2011;
originally announced June 2011.
-
Pearling instability of nanoscale fluid flow confined to a chemical channel
Authors:
J. Koplik,
T. S. Lo,
M. Rauscher,
S. Dietrich
Abstract:
We investigate the flow of a nano-scale incompressible ridge of low-volatility liquid along a "chemical channel": a long, straight, and completely wetting stripe embedded in a planar substrate, and sandwiched between two extended less wetting solid regions. Molecular dynamics simulations, a simple long-wavelength approximation, and a full stability analysis based on the Stokes equations are used…
▽ More
We investigate the flow of a nano-scale incompressible ridge of low-volatility liquid along a "chemical channel": a long, straight, and completely wetting stripe embedded in a planar substrate, and sandwiched between two extended less wetting solid regions. Molecular dynamics simulations, a simple long-wavelength approximation, and a full stability analysis based on the Stokes equations are used, and give qualitatively consistent results. While thin liquid ridges are stable both statically and during flow, a (linear) pearling instability develops if the thickness of the ridge exceeds half of the width of the channel. In the flowing case periodic bulges propagate along the channel and subsequently merge due to nonlinear effects. However, the ridge does not break up even when the flow is unstable, and the qualitative behavior is unchanged even when the fluid can spill over onto a partially wetting exterior solid region.
△ Less
Submitted 15 November, 2005; v1 submitted 9 November, 2005;
originally announced November 2005.