Showing 1–15 of 15 results for author: Diener, R

Upgrading the Beam Telescopes at the DESY II Test Beam Facility

Authors: H. Augustin, R. Diener, S. Dittmeier, P. M. Freeman, J. Hammerich, A. Herkert, L. Huth, D. Immig, U. Krämer, N. Meyners, I. Perić, O. Schäfer, A. Schöning, A. Simancas, M. Stanitzki, D. Stuart, B. Weinläder

Abstract: The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered… ▽ More The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle II as well as generic detector R&D. Beam telescopes are provided in all three test beam areas as precise tracking reference without time stam**, with triggered readout and a readout time of > 115 $μ$s. If the highest available rates are used, multiple particles are traversing the telescopes within one readout frame, thus creating ambiguities that cannot be resolved without additional timing layers. Several upgrades are currently investigated and tested: Firstly, a fast monolithic pixel sensor, the TelePix, to provide precise track timing and triggering on a region of interest is proposed to overcome this limitation. The TelePix is a 180 nm HV-CMOS sensor that has been developed jointly by DESY, KIT and the University of Heidelberg and designed at KIT. In this publication, the performance evaluation is presented: The difference between two amplifier designs is evaluated. A high hit detection efficiency of above 99.9 % combined with a time resolution of below 4 ns at negligible pixel noise rates is determined. Finally, the digital hit output to provide region of interest triggering is evaluated and shows a short absolute delay with respect to a traditional trigger scintillator as well as an excellent time resolution. Secondly, a fast LGAD plane has been proposed to provide a time resolution of a few 10 ps, which is foreseen to drastically improve the timing performance of the telescope. Time resolutions of below 70 ps have been determined in collaboration with the University of California, Santa Barbara. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Journal ref: NIM-A 1040,167-183, 2022

Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout

Authors: Yumi Aoki, David Attié, Ties Behnke, Alain Bellerive, Oleg Bezshyyko, Deb Bhattacharya Sankar, Purba Bhattacharya, Sudeb Bhattacharya, Yue Chang, Paul Colas, Gilles De Lentdecker, Klaus Dehmelt, Klaus Desch, Ralf Diener, Madhu Dixit, Ulrich Einhaus, Oleksiy Fedorchuk, Ivor Fleck, Keisuke Fujii, Takahiro Fusayasu, Serguei Ganjour, Philippe Gros, Peter Hayman, Katsumasa Ikematsu, Leif Jönsson , et al. (46 additional authors not shown)

Abstract: A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field… ▽ More A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx. △ Less

Submitted 25 November, 2022; v1 submitted 24 May, 2022; originally announced May 2022.

Comments: 29 pages, 30 figures, 6 tables. This is the Accepted Manuscript version of an article accepted for publication in Journal of Instrumentation. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1748-0221/17/11/P11027

Report number: PUBDB-2022-02594

Journal ref: Journal of Instrumentation, Volume 17, Number 11, P11027 -, November 2022

MPGDs for TPCs at future lepton colliders

Authors: Alain Bellerive, Jochen Kaminski, Peter M. Lewis, Paul Colas, Ralf Diener, Peter Kluit, Ronald Dean Settles, Jan Timmermans, Maxim Titov, Andreas Loschcke Centeno, Christian Wessel, Oskar Hartbrich, Sven Vahsen, Carlos Marinas, Huiron Qi, Zhiyong Zhang

Abstract: This submission will focus on advancements and advantages of Micro Pattern Gas Detector (MPGD) technologies and their applications to the construction of a dedicated Time Projection Chamber (TPC) that can serve as an excellent main tracker for any multipurpose detector that can be foreseen to operate at a future lepton collider. The first portion of the report will be the executive summary. It wil… ▽ More This submission will focus on advancements and advantages of Micro Pattern Gas Detector (MPGD) technologies and their applications to the construction of a dedicated Time Projection Chamber (TPC) that can serve as an excellent main tracker for any multipurpose detector that can be foreseen to operate at a future lepton collider. The first portion of the report will be the executive summary. It will be followed by sections detailing the applications of MPGDs specifically to the construction of the LCTPC for the ILD at ILC, for a possible upgrade of the Belle II detector at SuperKEKB and for the design of a TPC for a detector at CEPC. MPGD technologies offer synergies with other detector R&D and several application domains; a few examples will be provided in the context of the ongoing Snowmass long range planning exercise in the USA. Links to industrial partnership and work with institutions in the USA will be highlighted when appropriate. △ Less

Submitted 15 March, 2022; v1 submitted 11 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. And on behalf of the LCTPC Collaboration

Recent Performance Studies of the GEM-based TPC Readout (DESY Module)

Authors: Ties Behnke, Ralf Diener, Ulrich Einhaus, Uwe Krämer, Paul Malek, Oliver Schäfer, Mengqing Wu

Abstract: For the International Large Detector (ILD) at the planned International Linear Collider (ILC) a Time Projection Chamber (TPC) is foreseen as the main tracking detector. To achieve the required point resolution, Micro-Pattern Gaseous Detectors (MPGD) will be used in the amplification stage. A readout module using a stack of three Gas Electron Multipliers (GEM) for gas amplification was developed at… ▽ More For the International Large Detector (ILD) at the planned International Linear Collider (ILC) a Time Projection Chamber (TPC) is foreseen as the main tracking detector. To achieve the required point resolution, Micro-Pattern Gaseous Detectors (MPGD) will be used in the amplification stage. A readout module using a stack of three Gas Electron Multipliers (GEM) for gas amplification was developed at DESY and tested at the DESY II Test Beam Facility. After introducing the readout module and the infrastructure at the test beam facility, the performance related to single point and double-hit resolution of three of these modules is presented. This is followed by results on the particle identification capabilities of the system, using the specific energy loss dE/dx, and simulation studies, aimed to investigate and quantify the impact of high granularity on dE/dx resolution. In addition, a new and improved TPC field cage and the LYCORIS Large-Area Silicon-Strip Telescope for the test beam are described. The LYCORIS beam telescope is foreseen to provide a precise reference of the particle trajectory to validate the momentum resolution measured with a large TPC prototype. For this purpose, it is being installed and tested at the test beam facility within the so-called PCMAG (Persistent Current Magnet). △ Less

Submitted 24 June, 2020; v1 submitted 15 June, 2020; originally announced June 2020.

Comments: 15 pages, 12 figures, "Talk presented at the International Workshop on Future Linear Colliders (LCWS2019), Sendai, Japan, 28 October-1 November, 2019. C19-10-28."

The DESY II Test Beam Facility

Authors: Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Ingrid-Maria Gregor, Ulrich Kötz, Uwe Krämer, Norbert Meyners, Natalia Potylitsina-Kube, Anne Schütz, Paul Schütze, Marcel Stanitzki

Abstract: DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed… ▽ More DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in the GeV range. To this end, it offers electron/positron beams with user-selectable momenta from 1-6 GeV/c. The available infrastructure for the users is unique, including a high field solenoidal magnet and permanently installed high-precision pixel beam telescopes. This publication gives a detailed description of the facility, the available infrastructure, and the simulated and measured performance. △ Less

Submitted 26 October, 2018; v1 submitted 24 July, 2018; originally announced July 2018.

Comments: 63 pages, 67 figures

Report number: DESY 18-111

Summary and Conclusions of the First DESY Test Beam User Workshop

Authors: Jan-Hendrik Arling, M. Sohail Amjad, Laura Bandiera, Ties Behnke, Dominik Dannheim, Ralf Diener, Jan Dreyling-Eschweiler, Heiko Ehrlichmann, Andreas Gerbershagen, Ingrid-Maria Gregor, Avetik Hayrapetyan, Hendrik Jansen, Jochen Kaminski, Jiri Kroll, Paolo Martinengo, Norbert Meyners, Christian Müntz, Luise Poley, Benjamin Schwenker, Marcel Stanitzki

Abstract: On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcomi… ▽ More On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALICE, ATLAS, CMS, LHCb) to FAIR (CBM, PANDA), DUNE, Belle-II, future linear colliders (ILC, CLIC) and generic detector R&D presented their experiences with the DESY II Test Beam Facility, their concrete plans for the upcoming years and a first estimate of their needs for beam time in the long-term future beyond 2025. A special focus was also on additional improvements to the facility beyond its current capabilities. △ Less

Submitted 15 May, 2018; v1 submitted 1 February, 2018; originally announced February 2018.

Report number: DESY 18-019

A Time Projection Chamber with GEM-Based Readout

Authors: The LCTPC Collaboration, David Attié, Ties Behnke, Alain Bellerive, Oleg Bezshyyko, Deb Sankar Bhattacharya, Purba Bhattacharya, Sudeb Bhattacharya, Stefano Caiazza, Paul Colas, Gilles De Lentdecker, Klaus Dehmelt, Klaus Desch, Ralf Diener, Madhu Dixit, Ivor Fleck, Keisuke Fujii, Takahiro Fusayasu, Serguei Ganjour, Yuanning Gao, Philippe Gros, Peter Hayman, Vincent Hedberg, Katsumasa Ikematsu, Leif Jönsson , et al. (45 additional authors not shown)

Abstract: For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a… ▽ More For the International Large Detector concept at the planned International Linear Collider, the use of time projection chambers (TPC) with micro-pattern gas detector readout as the main tracking detector is investigated. In this paper, results from a prototype TPC, placed in a 1 T solenoidal field and read out with three independent GEM-based readout modules, are reported. The TPC was exposed to a 6 GeV electron beam at the DESY II synchrotron. The efficiency for reconstructing hits, the measurement of the drift velocity, the space point resolution and the control of field inhomogeneities are presented. △ Less

Submitted 4 April, 2016; originally announced April 2016.

Comments: 22 pages, 19 figures

Report number: DESY 16-059

A Novel Self-supporting GEM-based Amplification Structure for a Time Projection Chamber at the ILC

Authors: Ties Behnke, Ralf Diener, Christoph Rosemann, Lea Steder

Abstract: Modern time projection chambers are increasingly based on micro pattern gas detector readout systems. In this paper a self-supporting method used to mount Gas Electron Multiplier foils is presented. It is based on light weight ceramic grids, and promises to cover large readout areas with minimum dead zones and material, while ensuring a flat and mechanically stable mounting. The structure has been… ▽ More Modern time projection chambers are increasingly based on micro pattern gas detector readout systems. In this paper a self-supporting method used to mount Gas Electron Multiplier foils is presented. It is based on light weight ceramic grids, and promises to cover large readout areas with minimum dead zones and material, while ensuring a flat and mechanically stable mounting. The structure has been tested in a Time Projection Chamber prototype, using cosmic muon tracks. The impact of the mounting structure on the charge measurement, the track reconstruction and the single point resolution is quantified. △ Less

Submitted 11 June, 2015; v1 submitted 19 November, 2012; originally announced November 2012.

Comments: 11 pages, 7 figures, to be published in JINST. Version with minor changes according to referee request

Report number: DESY 12-212

Development of a TPC for an ILC Detector

Authors: R. Diener

Abstract: The ILD concept, one of two proposed detector concepts for the planned International Linear Collider (ILC), foresees a Time Projection Chamber (TPC) as the main tracking detector. The LCTPC (Linear Collider TPC) collaboration pursues R&D to develop such a TPC based on the best state-of-the-art technology. After tests with smaller prototypes, the current efforts focus on studies using a large pro… ▽ More The ILD concept, one of two proposed detector concepts for the planned International Linear Collider (ILC), foresees a Time Projection Chamber (TPC) as the main tracking detector. The LCTPC (Linear Collider TPC) collaboration pursues R&D to develop such a TPC based on the best state-of-the-art technology. After tests with smaller prototypes, the current efforts focus on studies using a large prototype with a diameter of 770 mm and a length of 610 mm. This prototype can accommodate seven read-out modules of a size comparable to the ones that would be used in the final TPC. Several prototypes of modules using Micromegas or GEM structures as gas amplification were constructed and tested. Besides the traditional pad read-out, a pixel read-out based on the TimePix chip is studied in these tests with up to 8 TimePix chips on a board. The current status and future plans of the R&D are presented. △ Less

Submitted 9 March, 2012; originally announced March 2012.

Comments: 8 pages, 8 figures, pre-print of proceedings for TIPP 2011 (Technology and Instrumentation in Particle Physics '11)

Beam Test with a GridGEM TPC Prototype Module

Authors: Ralf Diener, Ties Behnke, Stefano Caiazza, Isa Heinze, Volker Prahl, Christoph Rosemann, Oliver Schäfer, Jan Timmermans, Robert Volkenborn, Klaus Zenker

Abstract: The International Large Detector (ILD) --a detector concept for the International Linear Collider (ILC)-- foresees a Time Projection Chamber (TPC) as its main tracking detector. Currently, the R&D efforts for such a TPC focus on studies using a large prototype that can accommodate up to seven read-out modules which are comparable to the ones that would be used in the final ILD TPC. The DESY TPC gr… ▽ More The International Large Detector (ILD) --a detector concept for the International Linear Collider (ILC)-- foresees a Time Projection Chamber (TPC) as its main tracking detector. Currently, the R&D efforts for such a TPC focus on studies using a large prototype that can accommodate up to seven read-out modules which are comparable to the ones that would be used in the final ILD TPC. The DESY TPC group has developed such a module using GEMs for the gas amplification, which are mounted on thin ceramic frames. The module design and first results of a test beam campaign are presented. △ Less

Submitted 29 February, 2012; originally announced February 2012.

Comments: 6 pages, 11 figures, prepared for LCWS 2011 proceedings

Infrastructure for Detector Research and Development towards the International Linear Collider

Authors: J. Aguilar, P. Ambalathankandy, T. Fiutowski, M. Idzik, Sz. Kulis, D. Przyborowski, K. Swientek, A. Bamberger, M. Köhli, M. Lupberger, U. Renz, M. Schumacher, Andreas Zwerger, A. Calderone, D. G. Cussans, H. F. Heath, S. Mandry, R. F. Page, J. J. Velthuis, D. Attié, D. Calvet, P. Colas, X. Coppolani, Y. Degerli, E. Delagnes , et al. (252 additional authors not shown)

Abstract: The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infras… ▽ More The EUDET-project was launched to create an infrastructure for develo** and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry. △ Less

Submitted 23 January, 2012; originally announced January 2012.

Comments: 54 pages, 48 pictures

A Lightweight Field Cage for a Large TPC Prototype for the ILC

Authors: Ties Behnke, Klaus Dehmelt, Ralf Diener, Lea Hallermann, Takeshi Matsuda, Volker Prahl, Peter Schade

Abstract: We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21 % of a radiation length and a drift field homogeneity of Delta(E)/(E) l… ▽ More We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21 % of a radiation length and a drift field homogeneity of Delta(E)/(E) less or equal 10^-4. Since November 2008 the prototype has been part of a comprehensive test beam setup at DESY and used as a test chamber for the development of Micro Pattern Gas Detector based readout devices. △ Less

Submitted 16 June, 2010; originally announced June 2010.

Comments: 16 pages, 13 figures, 3 tables

Report number: DESY 10-084

Journal ref: JINST 5:P10011,2010

First Results from New High Magnetic Field Measurements with the MediTPC Prototype

Authors: Ralf Diener, Diana Linzmaier

Abstract: In the ILD concept, a TPC is foreseen as the main tracking device. The MediTPC prototype has been developed at DESY to study the properties of Gas Electron Multipliers (GEMs) and to perform resolution studies. Studies of the influence of oxygen contaminations on the electron signal are presented here. Further, resolution results with new pad planes with 1.27x7.0 sqmm pad pitch and in high magnet… ▽ More In the ILD concept, a TPC is foreseen as the main tracking device. The MediTPC prototype has been developed at DESY to study the properties of Gas Electron Multipliers (GEMs) and to perform resolution studies. Studies of the influence of oxygen contaminations on the electron signal are presented here. Further, resolution results with new pad planes with 1.27x7.0 sqmm pad pitch and in high magnetic fields are shown. △ Less

Submitted 30 January, 2009; originally announced January 2009.

Comments: 3 pages, 4 figures, LCWS08 conference proceedings

MarlinTPC: A Marlin based common TPC software framework for the LC-TPC collaboration

Authors: Jason Abernathy, Klaus Dehmelt, Ralf Diener, Jim Hunt, Matthias Enno Janssen, Martin Killenberg, Thorsten Krautscheid, Astrid Muennich, Martin Ummenhofer, Adrian Vogel, Peter Wienemann

Abstract: We describe the goals and present functionality of MarlinTPC, a common software framework for the LC-TPC collaboration based on LCIO, Marlin and other ilcsoft tools. We describe the goals and present functionality of MarlinTPC, a common software framework for the LC-TPC collaboration based on LCIO, Marlin and other ilcsoft tools. △ Less

Submitted 6 September, 2007; originally announced September 2007.

Comments: Submitted to the proceedings of the International Linear Collider Workshop 2007 (LCWS07), 5 pages

Journal ref: ECONF C0705302:TRK01,2007

A Quantum Tweezer for Atoms

Authors: Roberto B. Diener, Biao Wu, Mark G. Raizen, Qian Niu

Abstract: We propose a quantum tweezer for extracting a desired number of neutral atoms from a reservoir. A trapped Bose-Einstein condensate (BEC) is used as the reservoir, taking advantage of its coherent nature, which can guarantee a constant outcome. The tweezer is an attractive quantum dot, which may be generated by red-detuned laser light. By moving with certain speeds, the dot can extract a desired… ▽ More We propose a quantum tweezer for extracting a desired number of neutral atoms from a reservoir. A trapped Bose-Einstein condensate (BEC) is used as the reservoir, taking advantage of its coherent nature, which can guarantee a constant outcome. The tweezer is an attractive quantum dot, which may be generated by red-detuned laser light. By moving with certain speeds, the dot can extract a desired number of atoms from the BEC through Landau-Zener tunneling. The feasibility of our quantum tweezer is demonstrated through realistic and extensive model calculations. △ Less

Submitted 15 June, 2002; v1 submitted 10 January, 2002; originally announced January 2002.

Comments: 4 pages, 6 figures Revised version

Journal ref: Phys. Rev. Lett. 89 (2002) 070401