-
An Electrically Conductive Oleogel Paste for Edible Electronics
Authors:
Pietro Cataldi,
Leonardo Lamanna,
Claudia Bertei,
Federica Arena,
Pietro Rossi,
Mufeng Liu,
Fabio Di Fonzo,
Dimitrios G. Papageorgiou,
Alessandro Luzio,
Mario Caironi
Abstract:
Edible electronics will facilitate point-of-care testing through safe and cheap devices that are digested or degraded in the body or environment after performing a specific function. Its thrive depends on creating a library of materials that are the basic building blocks for eatable technologies. Edible electrical conductors fabricated with green methods that allow production at a large scale and…
▽ More
Edible electronics will facilitate point-of-care testing through safe and cheap devices that are digested or degraded in the body or environment after performing a specific function. Its thrive depends on creating a library of materials that are the basic building blocks for eatable technologies. Edible electrical conductors fabricated with green methods that allow production at a large scale and composed of food derivatives, ingestible in large amounts without risk for human health are needed. Here, conductive pastes made with materials with a high tolerable upper intake limit (major of mg/kg body weight /day) are proposed. Conductive oleogel paste composites, made with biodegradable and food-grade materials like natural waxes, oils, and activated carbon conductive fillers, are presented. The proposed pastes are compatible with manufacturing processes such as direct ink writing and thus are suitable for an industrial scale-up. These conductors are built without the use of solvents, and with tunable electromechanical features and adhesion depending on the composition. They have antibacterial and hydrophobic properties, so that they can be used in contact with food preventing contamination and preserving its organoleptic properties. As a proof-of-principle application, the edible conductive pastes are demonstrated to be effective edible contacts for food impedance analysis, to be integrated for example in smart fruit labels for ripening monitoring.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Early stages of dissolution corrosion in 316L and DIN 1.4970 austenitic stainless steels with and without anticorrosion coatings in static liquid lead-bismuth eutectic (LBE) at 500$^\circ$C
Authors:
Evangelia Charalampopoulou,
Konstantina Lambrinou,
Tom Van der Donck,
Boris Paladino,
Fabio Di Fonzo,
Clio Azina,
Per Eklund,
Stanislav Mráz,
Jochen M. Schneider,
Dominique Schryvers,
Rémi Delville
Abstract:
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to a…
▽ More
This work addresses the early stages ($\le$1000 h) of the dissolution corrosion behavior of 316L and DIN 1.4970 austenitic stainless steels in contact with oxygen-poor (C$_O$ < 10$^-$$^8$ mass%), static liquid lead-bismuth eutectic (LBE) at 500°C for 600-1000 h. The objective of this study was to determine the relative early-stage resistance of the uncoated steels to dissolution corrosion and to assess the protectiveness of select candidate coatings (Cr$_2$AlC, Al$_2$O$_3$, V$_2$Al$_x$C$_y$). The simultaneous exposure of steels with intended differences in microstructure and thermomechanical state showed the effects of steel grain size, density of annealing/deformation twins, and secondary precipitates on the steel dissolution corrosion behavior. The findings of this study provide recommendations on steel manufacturing with the aim of using the steels to construct Gen-IV lead-cooled fast reactors.
△ Less
Submitted 13 July, 2021;
originally announced August 2021.
-
Turning bad into good: a water-splitting-active hole transporting material to preserve the performance of perovskite solar cells in humid environments
Authors:
Min Kim,
Antonio Alfano,
Giovanni Perotto,
Michele Serri,
Nicola Dengo,
Alessandro Mezzetti,
Silvia Gross,
Mirko Prato,
Marco Salerno,
Roberto Sorrentino,
Gaudenzio Meneghesso,
Fabio Di Fonzo,
Annamaria Petrozza,
Teresa Gatti,
Francesco Lamberti
Abstract:
Lead halide perovskite-based photoactive layers are nowadays employed for a large number of optoelectronic applications, from solar cells to photodetectors and light-emitting diodes, because of their excellent absorption, emission and charge-transport properties. Unfortunately, their commercialization is still hindered by an intrinsic instability towards classical environmental conditions. Water i…
▽ More
Lead halide perovskite-based photoactive layers are nowadays employed for a large number of optoelectronic applications, from solar cells to photodetectors and light-emitting diodes, because of their excellent absorption, emission and charge-transport properties. Unfortunately, their commercialization is still hindered by an intrinsic instability towards classical environmental conditions. Water in particular promotes fast decomposition, leading to a drastic decrease in device performance. An innovative functional approach to overcome this major issue could derive from integrating water-splitting active species within charge extracting layers adjacent to the perovskite photoactive layer, converting incoming water molecules into molecular oxygen and hydrogen before they reach this last one, thus preserving device performance in time. In this work we report for the first time on a perovskite-ancillary layer based on CuSCN nanoplateletes dispersed in a p-type semiconducting polymeric matrix, combining hole extraction/transport properties with good water-oxidation activity, that transforms incoming water molecules and further triggers the in situ p-do** of the conjugated polymer by means of the produced dioxygen, further improving transport of photogenerated charges. This composite layer enables the long-term stabilization of a mixed cation lead halide perovskite within a direct solar cell architecture, maintaining a stable performance for 28 days in high-moisture simulated conditions. Our findings demonstrate that the engineering of a hole extraction layer with water-splitting active additives represent a valuable strategy to mitigate the degradation of perovskite solar cells exposed to atmospheric humidity. A similar approach could be employed in the future to improve stabilities of other optoelectronic devices based on water-sensitive species.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
