-
Spectral effects of radiating gases on the ignition in a multiswirl staged model combustor using full-spectrum k distribution method -- A Large Eddy Simulation Investigation
Authors:
Hongyuan Di,
Chaojun Wang,
Chuanlong Hu,
Xiao Liu,
Lixin Yang
Abstract:
Radiative heat transfer has been proven to be important during the ignition process in gas turbine. Those radiating gases (CO2, H2O, CO) generated during combustion may display strong spectral, or nongray behavior, which is difficult to both characterize and calculate. In this work, both the full-spectrum k-distribution (FSK) and weighted-sum-of-gray-gases (WSGG) method, along with the Dynamic-thi…
▽ More
Radiative heat transfer has been proven to be important during the ignition process in gas turbine. Those radiating gases (CO2, H2O, CO) generated during combustion may display strong spectral, or nongray behavior, which is difficult to both characterize and calculate. In this work, both the full-spectrum k-distribution (FSK) and weighted-sum-of-gray-gases (WSGG) method, along with the Dynamic-thickened-flame (DTF) and Large-Eddy-Simulation (LES) methods, are used to analyze how spectral behavior affects the ignition process in an experimental gas turbine. Results show that radiation affects the ignition process by heating the relatively low temperature regions. Consequently, each ignition phase is differently affected by different spectral treatments. During the initial kernel phase, spectral properties have minimal influence on flame structures and the ignition delay time due to the negligible radiation and optically-thin scenario. However, during the flame growth phase, significant differences appear in the flame structure and the flame propagation speed among different spectral treatments. After the flame fill the combustor and during the stable combustion phase, differences in flame structures calculated by different models become less, but radiation still play an important role in combustion. Therefore, high-fidelity spectral models are recommended during the modelling of the ignition process in the gas turbine.
△ Less
Submitted 12 April, 2024; v1 submitted 5 March, 2024;
originally announced March 2024.
-
3D Curvature Analysis of Seismic Waveforms and its Interpretational Implications
Authors:
Haibin Di,
Motaz Alfarraj,
Ghassan AlRegib
Abstract:
The idea of curvature analysis has been widely used in subsurface structure interpretation from three-dimensional (3D) seismic data (e.g., fault/fracture detection and geomorphology delineation) by measuring the lateral changes in the geometry of seismic events. However, such geometric curvature utilizes only the kinematic information (two-way traveltime) of the available seismic signals. While an…
▽ More
The idea of curvature analysis has been widely used in subsurface structure interpretation from three-dimensional (3D) seismic data (e.g., fault/fracture detection and geomorphology delineation) by measuring the lateral changes in the geometry of seismic events. However, such geometric curvature utilizes only the kinematic information (two-way traveltime) of the available seismic signals. While analyzing the dynamic information (waveform), the traditional approaches (e.g., complex trace analysis) are often trace-wise and thereby fail to take into account the seismic reflector continuity and deviate from the true direction of geologic deposition, especially for steeply dip** formations. This study proposes extending the 3D curvature analysis to the waveforms in a seismic profile, here denoted as the waveform curvature, and investigates the associated implications for assisting seismic interpretation. Applications to the F3 seismic dataset over the Netherlands North Sea demonstrate the added values of the proposed waveform curvature analysis in four aspects. First, the capability of the curvature operator in differentiating convex and concave bending allows automatic decomposition of a seismic image by the reflector types (peaks, troughs and zero-crossings), which can greatly facilitate computer-aided horizon interpretation and modelling from 3D seismic data. Second, the signed minimum curvature offers a new analytical approach for estimating the fundamental and important reflector dip attribute by searching the orientation associated with least waveform variation. Third, the signed maximum curvature makes it possible to analyze the seismic signals along the normal direction of the reflection events. Finally, the curvature analysis promotes the frequency bands of the seismic signals and thereby enhances the apparent resolution on identifying and interpreting subtle seismic features.
△ Less
Submitted 1 February, 2019;
originally announced February 2019.
-
Multiscale Fusion for Seismic Geometric Attribute Enhancement
Authors:
Motaz Alfarraj,
Haibin Di,
Ghassan AlRegib
Abstract:
In this abstract, we propose a multiscale fusion technique to enhance seismic geometric attributes, such as dip and curvature, which are very sensitive to noise present in seismic data. For a give seismic section, first, we construct a Gaussian pyramid that allows us to generate the seismic attribute at different resolutions (scales). Then, all attributes at the different scales are fused together…
▽ More
In this abstract, we propose a multiscale fusion technique to enhance seismic geometric attributes, such as dip and curvature, which are very sensitive to noise present in seismic data. For a give seismic section, first, we construct a Gaussian pyramid that allows us to generate the seismic attribute at different resolutions (scales). Then, all attributes at the different scales are fused together to form the proposed multiscale enhanced attribute. Applications to the 3D seismic dataset over the Great South Basin in New Zealand demonstrate that the proposed method is capable of improving both the resolution and noise robustness of the first-order dip and the second-order curvature attributes, compared to existing methods and algorithm. Such improvement indicates the great potential of our multiscale fusion technique for enhancing the quality of more multitrace seismic attributes, such as coherence, flexure, and GLCM.
△ Less
Submitted 1 February, 2019;
originally announced February 2019.
-
Develo** a seismic pattern interpretation network (SpiNet) for automated seismic interpretation
Authors:
Haibin Di
Abstract:
Seismic interpretation is now serving as a fundamental tool for depicting subsurface geology and assisting activities in various domains, such as environmental engineering and petroleum exploration. However, most of the existing interpretation techniques are designed for interpreting a certain seismic pattern (e.g., faults and salt domes) in a given seismic dataset at one time; correspondingly, th…
▽ More
Seismic interpretation is now serving as a fundamental tool for depicting subsurface geology and assisting activities in various domains, such as environmental engineering and petroleum exploration. However, most of the existing interpretation techniques are designed for interpreting a certain seismic pattern (e.g., faults and salt domes) in a given seismic dataset at one time; correspondingly, the rest patterns would be ignored. Interpreting all the important seismic patterns becomes feasible with the aid of multiple classification techniques. When implementing them into the seismic domain, however, the major drawback is the low efficiency particularly for a large dataset, since the classification need to be repeated at every seismic sample. To resolve such limitation, this study first present a seismic pattern interpretation dataset (SpiDat), which tentatively categorizes 12 commonly-observed seismic patterns based on their signal intensity and lateral geometry, including these of important geologic implications such as faults, salt domes, gas chimneys, and depositional sequences. Then we propose a seismic pattern interpretation network (SpiNet) based on the state-of-the-art deconvolutional neural network, which is capable of automatically recognizing and annotating the 12 defined seismic patterns in real time. The impacts of the proposed SpiNet come in two folds. First, applying the SpiNet to a seismic cube allows interpreters to quickly identify the important seismic patterns as input to advanced interpretation and modeling. Second, the SpiNet paves the foundation for deriving more task-oriented seismic interpretation networks, such as fault detection. It is concluded that the proposed SpiNet holds great potentials for assisting the major seismic interpretation challenges and advancing it further towards cognitive seismic data analysis.
△ Less
Submitted 19 October, 2018;
originally announced October 2018.
-
Nonlinear Statistical Data Assimilation for HVC$_{\text{RA}}$ Neurons in the Avian Song System
Authors:
Nirag Kadakia,
Eve Armstrong,
Daniel Breen,
Uriel Morone,
Arij Daou,
Daniel Margoliash,
Henry DI Abarbanel
Abstract:
With the goal of building a model of the HVC nucleus in the avian song system, we discuss in detail a model of HVC$_{\text{RA}}$ projection neurons comprised of a somatic compartment with fast Na$^+$ and K$^+$ currents and a dendritic compartment with slower Ca$^{2+}$ dynamics. We show this model qualitatively exhibits many observed electrophysiological behaviors. We then show in numerical procedu…
▽ More
With the goal of building a model of the HVC nucleus in the avian song system, we discuss in detail a model of HVC$_{\text{RA}}$ projection neurons comprised of a somatic compartment with fast Na$^+$ and K$^+$ currents and a dendritic compartment with slower Ca$^{2+}$ dynamics. We show this model qualitatively exhibits many observed electrophysiological behaviors. We then show in numerical procedures how one can design and analyze feasible laboratory experiments that allow the estimation of all of the many parameters and unmeasured dynamical variables, given observations of the somatic voltage $V_s(t)$ alone. A key to this procedure is to initially estimate the slow dynamics associated with Ca, blocking the fast Na and K variations, and then with the Ca parameters fixed, estimate the fast Na and K dynamics. This separation of time scales provides a numerically robust method for completing the full neuron model, and the efficacy of the method is tested by prediction when observations are complete. The simulation provides a framework for the slice preparation experiments and illustrates the use of data assimilation methods for the design of those experiments.
△ Less
Submitted 29 September, 2016; v1 submitted 13 August, 2016;
originally announced August 2016.
-
Vector Dark Matter Detection using the Quantum Jump of Atoms
Authors:
Qiaoli Yang,
Haoran Di
Abstract:
The hidden sector U(1) vector bosons created from inflationary fluctuations can be a substantial fraction of dark matter if their mass is around $10^{-5}$eV. The creation mechanism makes the vector bosons' energy spectral density $ρ_{cdm}/ΔE$ very high. Therefore, the dark electric dipole transition rate in atoms is boosted if the energy gap between atomic states equals the mass of the vector boso…
▽ More
The hidden sector U(1) vector bosons created from inflationary fluctuations can be a substantial fraction of dark matter if their mass is around $10^{-5}$eV. The creation mechanism makes the vector bosons' energy spectral density $ρ_{cdm}/ΔE$ very high. Therefore, the dark electric dipole transition rate in atoms is boosted if the energy gap between atomic states equals the mass of the vector bosons. By using the Zeeman effect, the energy gap between the 2S state and the 2P state in hydrogen atoms or hydrogen like ions can be tuned. The $2S$ state can be populated with electrons due to its relatively long life, which is about $1/7$s. When the energy gap between the semi-ground $2S$ state and the 2P state matches the mass of the cosmic vector bosons, induced transitions occur and the 2P state subsequently decays into the 1S state. The $2P\to1S$ decay emitted Lyman-$α$ photons can then be registered. The choices of target atoms depend on the experimental facilities and the mass ranges of the vector bosons. Because the mass of the vector boson is connected to the inflation scale, the proposed experiment may provide a probe to inflation.
△ Less
Submitted 5 April, 2018; v1 submitted 5 June, 2016;
originally announced June 2016.
-
Enhancement of photoacoustic detection of inhomogeneities in polymers
Authors:
P. Grondona,
H. O. Di Rocco,
D. I. Iriarte,
J. A. Pomarico,
Héctor F. Ranea-Sandoval,
G. M. Bilmes
Abstract:
We report a series of experiments on laser pulsed photoacoustic excitationin turbid polymer samples addressed to evaluate the sound speed in the samples and the presence of inhomogeneities in the bulk. We describe a system which allows the direct measurement of the speed of the detected waves by engraving the surface of the piece under study with a fiduciary pattern of black lines. We also describ…
▽ More
We report a series of experiments on laser pulsed photoacoustic excitationin turbid polymer samples addressed to evaluate the sound speed in the samples and the presence of inhomogeneities in the bulk. We describe a system which allows the direct measurement of the speed of the detected waves by engraving the surface of the piece under study with a fiduciary pattern of black lines. We also describe how this pattern helps to enhance the sensitivity for the detection of an inhomogeneity in the bulk. These two facts are useful for studies in soft matter systems including, perhaps, biological samples. We have performed an experimental analysis on Grilon(R) samples in different situations and we show the limitations of the method.
△ Less
Submitted 10 December, 2013;
originally announced December 2013.