Showing 1–30 of 30 results for author: Dey, B

Technical design report for the CODEX-$β$ demonstrator

Authors: CODEX-b collaboration, :, Giulio Aielli, Juliette Alimena, James Beacham, Eli Ben Haim, Andras Burucs, Roberto Cardarelli, Matthew Charles, Xabier Cid Vidal, Albert De Roeck, Biplab Dey, Silviu Dobrescu, Ozgur Durmus, Mohamed Elashri, Vladimir Gligorov, Rebeca Gonzalez Suarez, Thomas Gorordo, Zarria Gray, Conor Henderson, Louis Henry, Philip Ilten, Daniel Johnson, Jacob Kautz, Simon Knapen , et al. (28 additional authors not shown)

Abstract: The CODEX-$β$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. The CODEX-$β$ apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The demonstrator project, intended to collect data in 2025, is described, with a particular focus on the design, construction, and installation of the new apparatus. △ Less

Submitted 22 May, 2024; originally announced June 2024.

Applying Machine Learning Models on Metrology Data for Predicting Device Electrical Performance

Authors: Bappaditya Dey, Anh Tuan Ngo, Sara Sacchi, Victor Blanco, Philippe Leray, Sandip Halder

Abstract: Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with o… ▽ More Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with overlay being its largest contribution. Overlay errors can lead to fatal failures of IC devices such as short circuits or broken connections in terms of P2P electrical contacts. Therefore, it is essential to develop effective overlay analysis and control techniques to ensure good functionality of fabricated semiconductor devices. In this work we have used an imec N14 BEOL process flow using LELE patterning technique to print metal layers with minimum pitch of 48nm with 193i lithography. FF structures are decomposed into two mask layers (M1A and M1B) and then the LELE flow is carried out to make the final patterns. Since a single M1 layer is decomposed into two masks, control of overlay between the two masks is critical. The goal of this work is of two-fold as, (a) to quantify the impact of overlay on capacitance and (b) to see if we can predict the final capacitance measurements with selected machine learning models at an early stage. To do so, scatterometry spectra are collected on these electrical test structures at (a)post litho, (b)post TiN hardmask etch, and (c)post Cu plating and CMP. Critical Dimension and overlay measurements for line-space pattern are done with SEM post litho, post etch and post Cu CMP. Various machine learning models are applied to do the capacitance prediction with multiple metrology inputs at different steps of wafer processing. Finally, we demonstrate that by using appropriate machine learning models we are able to do better prediction of electrical results. △ Less

Submitted 20 November, 2023; originally announced December 2023.

RANS-PINN based Simulation Surrogates for Predicting Turbulent Flows

Authors: Shinjan Ghosh, Amit Chakraborty, Georgia Olympia Brikis, Biswadip Dey

Abstract: Physics-informed neural networks (PINNs) provide a framework to build surrogate models for dynamical systems governed by differential equations. During the learning process, PINNs incorporate a physics-based regularization term within the loss function to enhance generalization performance. Since simulating dynamics controlled by partial differential equations (PDEs) can be computationally expensi… ▽ More Physics-informed neural networks (PINNs) provide a framework to build surrogate models for dynamical systems governed by differential equations. During the learning process, PINNs incorporate a physics-based regularization term within the loss function to enhance generalization performance. Since simulating dynamics controlled by partial differential equations (PDEs) can be computationally expensive, PINNs have gained popularity in learning parametric surrogates for fluid flow problems governed by Navier-Stokes equations. In this work, we introduce RANS-PINN, a modified PINN framework, to predict flow fields (i.e., velocity and pressure) in high Reynolds number turbulent flow regimes. To account for the additional complexity introduced by turbulence, RANS-PINN employs a 2-equation eddy viscosity model based on a Reynolds-averaged Navier-Stokes (RANS) formulation. Furthermore, we adopt a novel training approach that ensures effective initialization and balance among the various components of the loss function. The effectiveness of the RANS-PINN framework is then demonstrated using a parametric PINN. △ Less

Submitted 11 August, 2023; v1 submitted 9 June, 2023; originally announced June 2023.

Journal ref: Published at the 1st workshop on Synergy of Scientific and Machine Learning Modeling, ICML 2023

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

A Two-Phase Model of Early Atherosclerotic Plaque Development with LDL Toxicity Effects

Authors: Abdush Salam Pramanik, Bibaswan Dey, G. P. Raja Sekhar

Abstract: Atherosclerosis is a chronic inflammatory cardiovascular disease in which fatty plaque is built inside an artery wall. Early atherosclerotic plaque development is typically characterised by inflammatory tissues primarily consisting of foam cells and macrophages. We present a multiphase model that explores early plaque growth to emphasise the role of cytokines (in particular, Monocyte Chemoattracta… ▽ More Atherosclerosis is a chronic inflammatory cardiovascular disease in which fatty plaque is built inside an artery wall. Early atherosclerotic plaque development is typically characterised by inflammatory tissues primarily consisting of foam cells and macrophages. We present a multiphase model that explores early plaque growth to emphasise the role of cytokines (in particular, Monocyte Chemoattractant Protein-1) and oxidised low-density lipoprotein (oxLDL) in monocyte recruitment and foam cell production, respectively. The plaque boundary is assumed to move at the same speed as the inflammatory tissues close to the periphery. This study discusses oxLDL-induced toxic environment towards macrophages and foam cells such that they start to die beyond a threshold limit of oxLDL concentration owing to excessive consumption. Our findings reveal that initially, the plaque evolves rapidly, and the growth rate subsequently reduces because of oxLDL-induced toxicity. In addition, it is observed that the saturation of inflammatory cell volume fraction becomes independent of oxLDL concentration beyond the threshold limit, referred to as the oxLDL toxicity limit. Our study manifests that increased oxLDL flux promotes flattened plaque growth through oxLDL-induced toxicity, while elevated cytokines flux disrupts the corresponding flattened behaviour. Detailed analysis of the model presented in this article unfolds critical insights into the various biochemical and cellular mechanisms behind early plaque development. △ Less

Submitted 29 April, 2024; v1 submitted 5 April, 2023; originally announced April 2023.

MSC Class: 76Z05; 92C10; 92B05; 92C50; 35Q35 ACM Class: G.1.8

Flocks, Games, and Cognition: A Geometric Approach

Authors: Udit Halder, Vidya Raju, Matteo Mischiati, Biswadip Dey, P. S. Krishnaprasad

Abstract: Avian flocks display a wide variety of flight behaviors, including steady directed translation of center of mass, rapid change of overall morphology, re-shuffling of positions of individuals within a persistent form, etc. These behaviors may be viewed as flock-scale strategies, emerging from interactions between individuals, accomplishing some collective adaptive purpose such as finding a roost, o… ▽ More Avian flocks display a wide variety of flight behaviors, including steady directed translation of center of mass, rapid change of overall morphology, re-shuffling of positions of individuals within a persistent form, etc. These behaviors may be viewed as flock-scale strategies, emerging from interactions between individuals, accomplishing some collective adaptive purpose such as finding a roost, or mitigating the danger from predator attacks. While we do not conceive the flock as a single cognitive agent, the moment-to-moment decisions of individuals, influenced by their neighbors, appear as if to realize collective strategies that are cognizant of purpose. In this paper, we identify the actions of the flock as allocation of energetic resources, and thereby associate a cognitive cost to behavior. Our notion of cognitive cost reflects the burden arising from rapid re-allocation of resource. Using a recently developed natural geometric approach to kinetic energy allocation, we map the flock behavior to a temporal signature on the standard (probability) simplex. Given the signature of a flocking event, we calculate the cognitive cost as a solution to an optimal control problem based on a game-theoretic model. Alternatively, one can associate to a signature an entropic cost. These two cost measures, when applied to data on starling flocks, show a consistent spread in value across events, and we suggest the possibility that higher cost may arise from predator attacks. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Two-phase Modeling of Fluid Injection Inside Subcutaneous Layer of Skin

Authors: Abdush Salam Pramanik, Bibaswan Dey, Timir Karmakar, Kalyan Saha

Abstract: Being motivated by the delivery of drugs and vaccines through subcutaneous (SC) injection in human bodies, a theoretical investigation is performed using a two-dimensional mathematical model in the cartesian coordinate. In general, a large variety of biological tissues behave as deformable porous material with anisotropic hydraulic conductivity. Consequently, one can adopt the field equations of m… ▽ More Being motivated by the delivery of drugs and vaccines through subcutaneous (SC) injection in human bodies, a theoretical investigation is performed using a two-dimensional mathematical model in the cartesian coordinate. In general, a large variety of biological tissues behave as deformable porous material with anisotropic hydraulic conductivity. Consequently, one can adopt the field equations of mixture theory to describe the behavior of the interstitial fluid and adipose cell present in the subcutaneous layer of skin. During the procedure, a medical person takes a big pinch of the skin of the injection application area between the thumb and index finger and holds. This process pulls the fatty tissue away from the muscle and makes the injection process easier. In this situation, the small aspect ratio (denoted as $δ$) of the subcutaneous layer (SCL) i.e., $δ^2\sim0.01$ would simplify the governing equation for tissue dynamics as it becomes a perturbation parameter. This study highlights the issue of the mechanical response of the adipose tissue in terms of the anisotropic hydraulic conductivity variation, the viscosity of the injected drug, the mean depth of subcutaneous tissue, etc. In particular, the computed stress fields can measure the intensity of pain to be experienced by a patient after this procedure. Also, this study discusses the biomechanical impact of the creation of one or more eddy structures (s) near the area of applying injection, which is due to high pressure developed there, increased tissue anisotropy, fluid viscosity, etc. △ Less

Submitted 7 June, 2023; v1 submitted 24 January, 2022; originally announced January 2022.

MSC Class: 74-10; 92Bxx; 76Zxx; 76Txx

Study of geometric phase using classical coupled oscillators

Authors: Sharba Bhattacharjee, Biprateep Dey, Ashok K Mohapatra

Abstract: We illustrate the geometric phase associated with the cyclic dynamics of a classical system of coupled oscillators. We use an analogy between a classical coupled oscillator and a two-state quantum mechanical system to represent the evolution of the oscillator on an equivalent Hilbert space, which may be represented as a trajectory on the surface of a sphere. The cyclic evolution of the system lead… ▽ More We illustrate the geometric phase associated with the cyclic dynamics of a classical system of coupled oscillators. We use an analogy between a classical coupled oscillator and a two-state quantum mechanical system to represent the evolution of the oscillator on an equivalent Hilbert space, which may be represented as a trajectory on the surface of a sphere. The cyclic evolution of the system leads to a change in phase, which consists of a dynamic phase along with an additional phase shift dependent on the geometry of the evolution. A simple experiment suitable for advanced undergraduate students is designed to study the geometric phase incurred during cyclic evolution of a coupled oscillator. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Comments: 13 pages, 10 figures

Journal ref: European Journal of Physics, vol. 39, no. 3, p. 035404, 2018

Decay of two-dimensional quantum turbulence in binary Bose-Einstein condensates

Authors: Mithun Thudiyangal, Kenichi Kasamatsu, Bishwajyoti Dey, Panayotis G. Kevrekidis

Abstract: We study two-dimensional quantum turbulence in miscible binary Bose-Einstein condensates in either a harmonic trap or a steep-wall trap through the numerical simulations of the Gross-Pitaevskii equations. The turbulence is generated through a Gaussian stirring potential. When the condensates have unequal intra-component coupling strengths or asymmetric trap frequencies, the turbulent condensates u… ▽ More We study two-dimensional quantum turbulence in miscible binary Bose-Einstein condensates in either a harmonic trap or a steep-wall trap through the numerical simulations of the Gross-Pitaevskii equations. The turbulence is generated through a Gaussian stirring potential. When the condensates have unequal intra-component coupling strengths or asymmetric trap frequencies, the turbulent condensates undergo a dramatic decay dynamics to an interlaced array of vortex-antidark structures, a quasi-equilibrium state, of like-signed vortices with an extended size of the vortex core. The time of formation of this state is shortened when the parameter asymmetry of the intra-component couplings or the trap frequencies are enhanced. The corresponding spectrum of the incompressible kinetic energy exhibits two noteworthy features: (i) a $k^{-3}$ power-law around the range of the wave number determined by the spin healing length (the size of the extended vortex-core) and (ii) a flat region around the range of the wave number determined by the density healing length. The latter is associated with the small scale phase fluctuation relegated outside the Thomas-Fermi radius and is more prominent as the strength of intercomponent interaction approaches the strength of intra-component interaction. We also study the impact of the inter-component interaction to the cluster formation of like-signed vortices in an elliptical steep-wall trap, finding that the inter-component coupling gives rise to the decay of the clustered configuration. △ Less

Submitted 11 November, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. A 103, 023301 (2021)

Resistive Switching Behaviour of Organic Molecules

Authors: Bapi Dey, Surajit Sarkar, Hritinava Banik, Syed Arshad Hussain

Abstract: Organic electronics is very promising due to the flexibility, modifiability as well as variety of the available organic molecules. Efforts are going on to use organic materials for the realization of memory devices. In this regard resistive switching devices surely will play a key role. In this paper an effort has been made to illustrate the general information about resistive switching devices as… ▽ More Organic electronics is very promising due to the flexibility, modifiability as well as variety of the available organic molecules. Efforts are going on to use organic materials for the realization of memory devices. In this regard resistive switching devices surely will play a key role. In this paper an effort has been made to illustrate the general information about resistive switching devices as well as switching mechanisms involving organic materials. As a whole a general overview of the emerging topic resistive switching has been given. △ Less

Submitted 3 May, 2020; originally announced May 2020.

Comments: 8 pages, 3 figures

Journal ref: Materials Today: Proceedings (2020)

Background studies for the CODEX-b experiment: measurements and simulation

Authors: Biplab Dey, Jongho Lee, Victor Coco, Chang-Seong Moon

Abstract: This report presents results from a background measurement campaign for the CODEX-b proposal undertaken in August, 2018. The data were recorded in the DELPHI side of the LHCb cavern behind a 3.2~m concrete shield wall, during Run~2 proton-proton collisions with the goal of calibrating the simulation for the full CODEX-b detector. The maximum flux rate in the DELPHI side of the cavern was found to… ▽ More This report presents results from a background measurement campaign for the CODEX-b proposal undertaken in August, 2018. The data were recorded in the DELPHI side of the LHCb cavern behind a 3.2~m concrete shield wall, during Run~2 proton-proton collisions with the goal of calibrating the simulation for the full CODEX-b detector. The maximum flux rate in the DELPHI side of the cavern was found to be around 0.6~mHz/cm$^2$ across a vertical plane just behind the shield wall, parallel to the beam line. A detailed simulation under development within the LHCb {\tt Gauss} framework is described. This includes shielding elements pertinent for CODEX-b's acceptance -- the LHCb detector, the shield wall and cavern infrastructure. Additional flux from tracks not in the line of sight from the interaction point, but bent by the magnetic fields, are incorporated. Overall, the simulation overestimates the background flux compared to the measurement. Several cross-checks and avenues for further investigations are described. △ Less

Submitted 19 December, 2020; v1 submitted 8 December, 2019; originally announced December 2019.

Characterization of an electrically cooled BEGe detector till E$_γ\sim7$ MeV

Authors: Sathi Sharma, Arkabrata Gupta, Balaram Dey, M. Roy Chowdhury, A. Mandal, A. Bisoi, V. Nanal, L. C. Tribedi, M. Saha Sarkar

Abstract: An electrically cooled Broad Energy Germanium (BEGe) detector has been characterized in the energy range E$_γ$ $\sim$ 0.122 - 7 MeV by utilizing the $γ$- rays emitted by a short-lived resonance state in $^{15}$O populated through $^{14}$N(p,$γ$) reaction and standard radioactive source ($^{152}$Eu). The experimental results have been reproduced through simulations with GEANT4 code, including vendo… ▽ More An electrically cooled Broad Energy Germanium (BEGe) detector has been characterized in the energy range E$_γ$ $\sim$ 0.122 - 7 MeV by utilizing the $γ$- rays emitted by a short-lived resonance state in $^{15}$O populated through $^{14}$N(p,$γ$) reaction and standard radioactive source ($^{152}$Eu). The experimental results have been reproduced through simulations with GEANT4 code, including vendor specified detector geometry along with the detailed construction of the target holder flange, to delineate the effects of the holder at various energies and detector position. Later the efficiency with a bare point source has been simulated. It has been found that the electrically cooled BEGe detector is suitable for usage in the $γ$-ray spectroscopy as well as for the study of resonance phenomena in nuclear astrophysics. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Comments: 18 pages including 10 figures

Symplectic ODE-Net: Learning Hamiltonian Dynamics with Control

Authors: Yaofeng Desmond Zhong, Biswadip Dey, Amit Chakraborty

Abstract: In this paper, we introduce Symplectic ODE-Net (SymODEN), a deep learning framework which can infer the dynamics of a physical system, given by an ordinary differential equation (ODE), from observed state trajectories. To achieve better generalization with fewer training samples, SymODEN incorporates appropriate inductive bias by designing the associated computation graph in a physics-informed man… ▽ More In this paper, we introduce Symplectic ODE-Net (SymODEN), a deep learning framework which can infer the dynamics of a physical system, given by an ordinary differential equation (ODE), from observed state trajectories. To achieve better generalization with fewer training samples, SymODEN incorporates appropriate inductive bias by designing the associated computation graph in a physics-informed manner. In particular, we enforce Hamiltonian dynamics with control to learn the underlying dynamics in a transparent way, which can then be leveraged to draw insight about relevant physical aspects of the system, such as mass and potential energy. In addition, we propose a parametrization which can enforce this Hamiltonian formalism even when the generalized coordinate data is embedded in a high-dimensional space or we can only access velocity data instead of generalized momentum. This framework, by offering interpretable, physically-consistent models for physical systems, opens up new possibilities for synthesizing model-based control strategies. △ Less

Submitted 29 February, 2024; v1 submitted 26 September, 2019; originally announced September 2019.

Comments: Published as a Conference Paper at ICLR 2020

Journal ref: International Conference on Learning Representations (ICLR 2020); https://openreview.net/forum?id=ryxmb1rKDS

Effect of Functional Group on Electrical Switching Behaviour of an Imidazole Derivative in Langmuir-Blodgett Film

Authors: Bapi Dey, Sudip Suklabaidya, Swapan Majumdar, Pabitra Kumar Paul, Debajyoti Bhattacharjee, Syed Arshad Hussain

Abstract: Here we report the design and synthesis of an imidazole derivative namely 1-benzyl-2,4,5-triaryl imidazole and its switching behaviour assembled onto Langmuir-Blodgett films. Monolayer characteristic of imidazole at the air-water interface has been studied by surface pressure vs area per molecule isotherm, hysteresis analysis and insitu Brewster Angle Microscopy . These studies indicated the forma… ▽ More Here we report the design and synthesis of an imidazole derivative namely 1-benzyl-2,4,5-triaryl imidazole and its switching behaviour assembled onto Langmuir-Blodgett films. Monolayer characteristic of imidazole at the air-water interface has been studied by surface pressure vs area per molecule isotherm, hysteresis analysis and insitu Brewster Angle Microscopy . These studies indicated the formation of stable floating Langmuir film at the water subphase. Atomic Force Microscopy investigation confirmed the successful deposition of the Langmuir film onto solid substrate. Device consisted of 60 layers LB films of imidazole showed resistive bipolar switching behaviour irrespective of the first applied bias voltage polarity. Observed bipolar switching has been explained in terms of reduction oxidation process. Due to the presence of strong reducible group C double bond N in the imidazole core, reduction oxidation process takes place easily during bias. Presence of sharp reduction and oxidation peaks in the Cyclic Voltammetry measurement of 2 also supported this hypothesis. Presence of benzyl group with the imidazole core played the crucial rule in the reduction oxidation process and hence the switching behaviour. When benzyl group was replaced by a H then bipolar switching was not observed. In that case oxidizable group NH opposed the reduction process during bias. This type of bipolar switching is very promising for future technological applications in organic electronics. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Comments: 26 pages 7 figures

Unique supramolecular Assembly through Langmuir Blodgett technique

Authors: S. A. Hussain, B. Dey, N. Mehta

Abstract: The Langmuir-Blodgett (LB) technique is a way of making supra-molecular assembly in ultrathin films with a controlled layered structure and crystal parameter, which have many envisioned technological applications for optical and molecular electronic devices as well as signal processing and transformation. Probably LB technique is the best method to manipulate materials at molecular level and provi… ▽ More The Langmuir-Blodgett (LB) technique is a way of making supra-molecular assembly in ultrathin films with a controlled layered structure and crystal parameter, which have many envisioned technological applications for optical and molecular electronic devices as well as signal processing and transformation. Probably LB technique is the best method to manipulate materials at molecular level and provides a scope to realize the molecular electronics in reality. In this review article, this important film preparation has been discussed, highlighting its application potential. △ Less

Submitted 26 July, 2019; originally announced July 2019.

Comments: 29 pages, 4 figures

Journal ref: Heliyon Volume 4, Issue 12, December 2018, e01038

Study of radioactivity built-up and decay with singles time-stamped data

Authors: Sangeeta Das, Arkajyoti De, Balaram Dey, Sathi Sharma, Anik Adhikari, S. S. Alam, Arkabrata Gupta, Y. Sapkota, Ananya Das, A. Saha, Dibyadyuti Pramanik, T. Bhattacharjee, Abhijit Bisoi, S. Sarkar, M. Saha Sarkar

Abstract: Time-stamped data have been used to estimate the decay half-lives of radioactive 118mSb and 64,66,68Ga nuclei. These nuclei are populated through the reaction 4He (Elab = 32 MeV) + nat In and p (Elab = 10 MeV) + natZn, respectively. The g -rays emitted by the excited daughter nuclei are detected by a single high purity germanium (HPGe) detector and the data are acquired using a CAEN 5780M desktop… ▽ More Time-stamped data have been used to estimate the decay half-lives of radioactive 118mSb and 64,66,68Ga nuclei. These nuclei are populated through the reaction 4He (Elab = 32 MeV) + nat In and p (Elab = 10 MeV) + natZn, respectively. The g -rays emitted by the excited daughter nuclei are detected by a single high purity germanium (HPGe) detector and the data are acquired using a CAEN 5780M desktop digitizer. Half-lives of different orders of magnitudes for the above mentioned nuclei are obtained from both the decay of parent and the growth of daughter nuclei. It is observed that the half-lives obtained from both these techniques match fairly well and also are consistent with the reported values. It is demonstrated that the time-stamped data can be useful while studying certain half-lives which are too long for measurement using in-beam electronic technique and too short for decay studies in off-beam methods. The data also have a special relevance for constant monitoring of beam current and beam-tuning. △ Less

Submitted 13 July, 2019; originally announced July 2019.

Comments: 13 Pages, 4 figures

Social decision-making driven by artistic explore-exploit tension

Authors: Kayhan Ozcimder, Biswadip Dey, Alessio Franci, Rebecca Lazier, Daniel Trueman, Naomi Ehrich Leonard

Abstract: We studied social decision-making in the rule-based improvisational dance $There$ $Might$ $Be$ $Others$, where dancers make in-the-moment compositional choices. Rehearsals provided a natural test-bed with communication restricted to non-verbal cues. We observed a key artistic explore-exploit tension in which the dancers switched between exploitation of existing artistic opportunities and riskier e… ▽ More We studied social decision-making in the rule-based improvisational dance $There$ $Might$ $Be$ $Others$, where dancers make in-the-moment compositional choices. Rehearsals provided a natural test-bed with communication restricted to non-verbal cues. We observed a key artistic explore-exploit tension in which the dancers switched between exploitation of existing artistic opportunities and riskier exploration of new ones. We investigated how the rules influenced the dynamics using rehearsals together with a model generalized from evolutionary dynamics. We tuned the rules to heighten the tension and modeled nonlinear fitness and feedback dynamics for mutation rate to capture the observed temporal phasing of the dancers' exploration-versus-exploitation. Using bifurcation analysis, we identified key controls of the tension and showed how they could shape the decision-making dynamics of the model much like turning a "dial" in the instructions to the dancers could shape the dance. The investigation became an integral part of the development of the dance. △ Less

Submitted 17 December, 2018; originally announced December 2018.

Journal ref: K. Ozcimder, B. Dey, A. Franci, R. Lazier, D. Trueman, and N. E. Leonard (2018): Social decision-making driven by artistic explore-exploit tension, Interdisciplinary Science Reviews

Monitoring radiation damage in the LHCb Tracker Turicensis

Authors: C. Abellan Beteta, M. Atzeni, V. Battista, A. Bursche, B. Dey, A. Dosil Suarez, C. Elsasser, A. Fernandez Prieto, J. Fu, E. Graverini, I. Komarov, E. Lemos Cid, F. Lionetto, A. Mauri, A. Merli, P. R. Pais, E. Perez Trigo, M. del Pilar Peco Regales, P. Stefko, O. Steinkamp, B. Storaci, M. Tobin, A. Weiden

Abstract: This paper presents the techniques used to monitor radiation damage in the LHCb Tracker Turicensis during the LHC Runs 1 and 2. Bulk leakage currents in the silicon sensors were monitored continuously, while the full depletion voltages of the sensors were estimated at regular intervals by performing dedicated scans of the charge collection efficiency as a function of the applied bias voltage. Pred… ▽ More This paper presents the techniques used to monitor radiation damage in the LHCb Tracker Turicensis during the LHC Runs 1 and 2. Bulk leakage currents in the silicon sensors were monitored continuously, while the full depletion voltages of the sensors were estimated at regular intervals by performing dedicated scans of the charge collection efficiency as a function of the applied bias voltage. Predictions of the expected leakage currents and full depletion voltages are extracted from the simulated radiation profile, the luminosity delivered by the LHC, and the thermal history of the silicon sensors. Good agreement between measurements and predictions is found. △ Less

Submitted 26 August, 2020; v1 submitted 13 September, 2018; originally announced September 2018.

Comments: 17 pages, 11 figures, 3 tables

Report number: CERN-LHCb-DP-2018-003

Journal ref: JINST 15 (2020), P08016

Neutron response of PARIS phoswich detector

Authors: Balaram Dey, C Ghosh, S. Pal, V. Nanal, R. G. Pillay, K. V. Anoop, M. S. Pose

Abstract: We have studied neutron response of PARIS phoswich [LaBr$_3$(Ce)-NaI(Tl)] detector which is being developed for measuring the high energy (E$_γ$ = 5 - 30 MeV) $γ$ rays emitted from the decay of highly collective states in atomic nuclei. The relative neutron detection efficiency of LaBr$_3$(Ce) and NaI(Tl) crystal of the phoswich detector has been measured using the time-of-flight (TOF) and pulse s… ▽ More We have studied neutron response of PARIS phoswich [LaBr$_3$(Ce)-NaI(Tl)] detector which is being developed for measuring the high energy (E$_γ$ = 5 - 30 MeV) $γ$ rays emitted from the decay of highly collective states in atomic nuclei. The relative neutron detection efficiency of LaBr$_3$(Ce) and NaI(Tl) crystal of the phoswich detector has been measured using the time-of-flight (TOF) and pulse shape discrimination (PSD) technique in the energy range of E$_n$ = 1 - 9 MeV and compared with the GEANT4 based simulations. It has been found that for E$_n$ $>$ 3 MeV, $\sim$ 95 \% of neutrons have the primary interaction in the LaBr$_3$(Ce) crystal, indicating that a clear n-$γ$ separation can be achieved even at $\sim$15 cm flight path. △ Less

Submitted 20 August, 2017; originally announced August 2017.

Signal coupling to embedded pitch adapters in silicon sensors

Authors: Marina Artuso, Christopher Betancourt, Iaroslava Bezshyiko, Steven Blusk, Ruth Bruendler, Szymon Bugiel, Roma Dasgupta, Adam Dendek, Biplab Dey, Scott Ely, Federica Lionetto, Marco Petruzzo, Ivan Polyakov, Matthew Rudolph, Heinrich Schindler, Olaf Steinkamp, Sheldon Stone

Abstract: We have examined the effects of embedded pitch adapters on signal formation in n-substrate silicon microstrip sensors with data from beam tests and simulation. According to simulation, the presence of the pitch adapter metal layer changes the electric field inside the sensor, resulting in slowed signal formation on the nearby strips and a pick-up effect on the pitch adapter. This can result in an… ▽ More We have examined the effects of embedded pitch adapters on signal formation in n-substrate silicon microstrip sensors with data from beam tests and simulation. According to simulation, the presence of the pitch adapter metal layer changes the electric field inside the sensor, resulting in slowed signal formation on the nearby strips and a pick-up effect on the pitch adapter. This can result in an inefficiency to detect particles passing through the pitch adapter region. All these effects have been observed in the beam test data. △ Less

Submitted 10 August, 2017; originally announced August 2017.

Small FDIRC Designs

Authors: B. Dey, B. Ratcliff, J. Va'vra

Abstract: In this article we explore the angular resolution limits attainable in small FDIRC designs taking advantage of the new highly pixelated detectors that are now available. Since the basic FDIRC design concept attains its particle separation performance mostly in the angular domain as measured by two-dimensional pixels, this paper relies primarily on a pixel-based analysis, with additional chromatic… ▽ More In this article we explore the angular resolution limits attainable in small FDIRC designs taking advantage of the new highly pixelated detectors that are now available. Since the basic FDIRC design concept attains its particle separation performance mostly in the angular domain as measured by two-dimensional pixels, this paper relies primarily on a pixel-based analysis, with additional chromatic corrections using the time domain, requiring single photon timing resolution at a level of 100-200ps only. This approach differs from other modern DIRC design concepts such as TOP or TORCH detectors, whose separation performances rely more strongly on time-dependent analyses. We find excellent single photon resolution with a geometry where individual bars are coupled to a single plate, which is coupled in turn to a cylindrical lens focusing camera. △ Less

Submitted 17 February, 2017; v1 submitted 13 October, 2016; originally announced October 2016.

Testbeam studies of pre-prototype silicon strip sensors for the LHCb UT upgrade project

Authors: Andrea Abba, Marina Artuso, Steven Blusk, Thomas Britton, Adam Davis, Adam Dendek, Biplab Dey, Scott Ely, **lin Fu, Paolo Gandini, Federica Lionetto, Peter Manning, Brian Meadows, Ray Mountain, Nicola Neri, Marco Petruzzo, Malgorzata Pikies, Tomasz Skwarnicki, Tomasz Szumlak, Jianchun Wang

Abstract: The LHCb experiment is preparing for a major upgrade in 2018-2019. One of the key components in the upgrade is a new silicon tracker situated upstream of the analysis magnet of the experiment. The Upstream Tracker (UT) will consist of four planes of silicon strip detectors, with each plane covering an area of about 2 m$^2$. An important consideration of these detectors is their performance after t… ▽ More The LHCb experiment is preparing for a major upgrade in 2018-2019. One of the key components in the upgrade is a new silicon tracker situated upstream of the analysis magnet of the experiment. The Upstream Tracker (UT) will consist of four planes of silicon strip detectors, with each plane covering an area of about 2 m$^2$. An important consideration of these detectors is their performance after they have been exposed to a large radiation dose. In this article we present test beam results of pre-prototype n-in-p and p-in-n sensors that have been irradiated with fluences up to $4.0\times10^{14}$ $n_{\rm eq}$ cm$^{-2}$. △ Less

Submitted 5 November, 2015; v1 submitted 31 May, 2015; originally announced June 2015.

Comments: 25 pages, 20 figures

Report number: LHCb-PUB-2015-015, CERN-LHCb-PUB-2015-015

Design and performance of the Focusing DIRC detector

Authors: B. Dey, M. Borsato, N. Arnaud, D. W. G. S. Leith, K. Nishimura, D. A. Roberts, B. N. Ratcliff, G. Varner, J. Va'vra

Abstract: We present the final results from a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC). This detector was designed as a full-scale prototype of the particle identification system for the SuperB experiment [1], and comprises 1/12 of the SuperB barrel azimuthal coverage, with partial photodetector and electronics implementation. The prototype was tested in the SLAC Cosmic Ray Telescop… ▽ More We present the final results from a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC). This detector was designed as a full-scale prototype of the particle identification system for the SuperB experiment [1], and comprises 1/12 of the SuperB barrel azimuthal coverage, with partial photodetector and electronics implementation. The prototype was tested in the SLAC Cosmic Ray Telescope which provided 3-D tracking of cosmic muons with an angular resolution of ~1.5 mrad, a position resolution of 4-5 mm, a start time resolution of 70 ps, and muon tracks above ~2 GeV tagged using an iron range stack. The fused silica focusing photon camera was coupled to a full-size BaBar DIRC bar box and was read out, over part of the full coverage, by 12 Hamamatsu H8500 multi-anode photomultipliers (MaPMTs) providing 768 pixels. We used waveform digitizing electronics to read out the MaPMTs. We give a detailed description of our data analysis methods and point out limitations on the present performance. We present results that demonstrate some basic performance characteristics of this design, including: (a) single photon Cherenkov angle resolutions with and without chromatic corrections, (b) signal-to-noise (S/N) ratio between the Cherenkov peak and background, which primarily consists of ambiguities of the possible photon paths from emission along the track to a given pixel, (c) dTOP = TOP_measured - TOP_expected resolutions (with TOP being the photon Time-of-Propagation in fused silica), and (d) performance of the detector in the presence of high-rate backgrounds. △ Less

Submitted 7 December, 2014; v1 submitted 30 September, 2014; originally announced October 2014.

Comments: 27 pages, 16 figures

SuperB Technical Design Report

Authors: SuperB Collaboration, M. Baszczyk, P. Dorosz, J. Kolodziej, W. Kucewicz, M. Sapor, A. Jeremie, E. Grauges Pous, G. E. Bruno, G. De Robertis, D. Diacono, G. Donvito, P. Fusco, F. Gargano, F. Giordano, F. Loddo, F. Loparco, G. P. Maggi, V. Manzari, M. N. Mazziotta, E. Nappi, A. Palano, B. Santeramo, I. Sgura, L. Silvestris , et al. (384 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch… ▽ More In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented. A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012. △ Less

Submitted 24 June, 2013; originally announced June 2013.

Comments: 495 pages

Report number: INFN-13-01/PI, LAL 13-01, SLAC-R-1003

The GlueX Central Drift Chamber: Design and Performance

Authors: Y. Van Haarlem, C. A. Meyer, F. Barbosa, B. Dey, D. Lawrence, V. Razmyslovich, E. Smith, G. Visser, T. Whitlatch, G. Wilkin, B. Zihlmann

Abstract: Tests and studies concerning the design and performance of the GlueX Central Drift Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo si… ▽ More Tests and studies concerning the design and performance of the GlueX Central Drift Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo simulation that can predict the detector response in an external magnetic field. Particle identification and charge division possibilities were also investigated. △ Less

Submitted 21 April, 2010; originally announced April 2010.

Comments: 16 pages, 29 figures

Journal ref: Nucl. Instrum. Meth. A622: 142-156,2010

Coherent Optimal Control of Multiphoton Molecular Excitation

Authors: Bijoy K Dey

Abstract: We give a framework for molecular multiphoton excitation process induced by an optimally designed electric field. The molecule is initially prepared in a coherent superposition state of two of its eigenfunctions. The relative phase of the two superposed eigenfunctions has been shown to control the optimally designed electric field which triggers the multiphoton excitation in the molecule. This b… ▽ More We give a framework for molecular multiphoton excitation process induced by an optimally designed electric field. The molecule is initially prepared in a coherent superposition state of two of its eigenfunctions. The relative phase of the two superposed eigenfunctions has been shown to control the optimally designed electric field which triggers the multiphoton excitation in the molecule. This brings forth flexibility in desiging the optimal field in the laboratory by suitably tuning the molecular phase and hence by choosing the most favorable interfering routes that the system follows to reach the target. We follow the quantum fluid dynamical formulation for desiging the electric field with application to HBr molecule. △ Less

Submitted 24 June, 2003; originally announced June 2003.

Comments: 5 figures

Journal ref: Journal of Physics B, 34, page 2189, 2001

Optimal Control of Quantum Dynamics : A New Theoretical Approach

Authors: Bijoy K. Dey

Abstract: A New theoretical formalism for the optimal quantum control has been presented. The approach stems from the consideration of describing the time-dependent quantum system in terms of the real physical observables, viz., the probability density rho(x,t) and the quantum current j(x,t) which is well documented in the Bohm's hydrodynamical formulation of quantum mechanics. The approach has been appli… ▽ More A New theoretical formalism for the optimal quantum control has been presented. The approach stems from the consideration of describing the time-dependent quantum system in terms of the real physical observables, viz., the probability density rho(x,t) and the quantum current j(x,t) which is well documented in the Bohm's hydrodynamical formulation of quantum mechanics. The approach has been applied for manipulating the vibrational motion of HBr in its ground electronic state under an external electric field. △ Less

Submitted 24 June, 2003; originally announced June 2003.

Comments: 4 figures

Journal ref: J. Physics A 33, 2000, page 4643-4656

Coherent Control of Atomic Beam Diffraction by Standing Light

Authors: Bijoy K. Dey

Abstract: Quantum interference is shown to deliver a means of regulating the diffraction pattern of a thermal atomic beam interacting with two standing wave electric fields. Parameters have been identified to enhance the diffraction probability of one momentum component over the others, with specific application to Rb atoms. Quantum interference is shown to deliver a means of regulating the diffraction pattern of a thermal atomic beam interacting with two standing wave electric fields. Parameters have been identified to enhance the diffraction probability of one momentum component over the others, with specific application to Rb atoms. △ Less

Submitted 24 June, 2003; originally announced June 2003.

Comments: 5 figures

Journal ref: Physical Review A 67, 023401, 2003

Coherently Controlled Nanoscale Molecular Deposition

Authors: Bijoy K. Dey, Moshe Shapiro, Paul Brumer

Abstract: Quantum interference effects are shown to provide a means of controlling and enhancing the focusing a collimated neutral molecular beam onto a surface. The nature of the aperiodic pattern formed can be altered by varying laser field characteristics and the system geometry. Quantum interference effects are shown to provide a means of controlling and enhancing the focusing a collimated neutral molecular beam onto a surface. The nature of the aperiodic pattern formed can be altered by varying laser field characteristics and the system geometry. △ Less

Submitted 12 September, 2000; originally announced September 2000.

Comments: 13 pages (inculding 4 figures), LaTeX (Phys. Rev. Lett., 2000, in Press)

Journal ref: Phys. Rev. Lett., 85, 3125, 2000

Optimal Control of Molecular Motion Expressed Through Quantum Fluid Dynamics

Authors: Bijoy K. Dey, Herschel Rabitz, Attila Askar

Abstract: A quantum fluid dynamic control formulation is presented for optimally manipulating atomic and molecular systems. In quantum fluid dynamic the control quantum system is expressed in terms of the probability density and the quantum current. This choice of variables is motivated by the generally expected slowly varying spatial-temporal dependence of the fluid dynamical variables. The quantum fluid… ▽ More A quantum fluid dynamic control formulation is presented for optimally manipulating atomic and molecular systems. In quantum fluid dynamic the control quantum system is expressed in terms of the probability density and the quantum current. This choice of variables is motivated by the generally expected slowly varying spatial-temporal dependence of the fluid dynamical variables. The quantum fluid dynamic approach is illustrated for manipulation of the ground electronic state dynamics of HCl induced by an external electric field. △ Less

Submitted 31 August, 2000; originally announced August 2000.

Comments: 18 pages, latex, 3 figures

Journal ref: Physical Review A, Volume 61, page- 043412, year- 2000