-
Correlating two qubits via common cavity environment
Authors:
Amit Dey
Abstract:
Generation of quantum entanglement between a pair of qubits is studied in a cavity-QED platform. The qubit pair is placed inside a common cavity environment. We show that the relative strength of qubit-photon couplings is crucial for establishing inter-qubit entanglement. Resonance as well as off-resonance between the qubits and photon are considered . For off-resonant case we detect a threshold v…
▽ More
Generation of quantum entanglement between a pair of qubits is studied in a cavity-QED platform. The qubit pair is placed inside a common cavity environment. We show that the relative strength of qubit-photon couplings is crucial for establishing inter-qubit entanglement. Resonance as well as off-resonance between the qubits and photon are considered . For off-resonant case we detect a threshold value of coupling ratio, beyond which maximally entangled state is always available. The resonant case displays interesting non-monotonic behavior, where the maximum entanglement peaks at an intermediate coupling ratio. The driven-dissipative dynamics of our model exhibits non-trivial dependence of steady-state entanglement on the drive strength.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Hyperradiance, photon blockade and concurrence in a pair of qubits inside a driven cavity
Authors:
Anushree Dey,
Bimalendu Deb
Abstract:
We theoretically study the radiance properties of a pair of qubits inside a single-mode cavity driven by a two-photon drive. Our results show that, when the two qubits are strongly coupled to the cavity field, the collective radiation emitted from the qubits exhibits hyperradiance which can be detected as a signature of two qubit entanglement in the weak-driving regime. We quantify the entanglemen…
▽ More
We theoretically study the radiance properties of a pair of qubits inside a single-mode cavity driven by a two-photon drive. Our results show that, when the two qubits are strongly coupled to the cavity field, the collective radiation emitted from the qubits exhibits hyperradiance which can be detected as a signature of two qubit entanglement in the weak-driving regime. We quantify the entanglement in terms of concurrence. Additionally, we study the radiance behaviour in the presence of an intracavity Kerr-nonlinear medium that leads to two-photon blockade. Our results suggest that this system with nonlinearity may act as a quadrature-squeezed and hyperradiant two-photon source.
△ Less
Submitted 1 April, 2024; v1 submitted 20 March, 2024;
originally announced March 2024.
-
Strain Engineering for High-Performance Phase Change Memristors
Authors:
Wenhui Hou,
Ahmad Azizimanesh,
Aditya Dey,
Yufeng Yang,
Wuxiucheng Wang,
Chen Shao,
Hui Wu,
Hesam Askari,
Sobhit Singh,
Stephen M. Wu
Abstract:
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switc…
▽ More
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switching speed) of all 2D memristive devices, achieved without forming steps. Using process-induced strain engineering, we directly pattern stressed metallic contacts to induce a semimetallic to semiconducting phase transition in MoTe2 forming a self-aligned vertical transport memristor with semiconducting MoTe$_{2}$ as the active region. These devices utilize strain to bring them closer to the phase transition boundary and achieve ultra-low ~90 mV switching voltage, ultra-high ~10$^8$ on/off ratio, 5 ns switching, and retention of over 10$^5$ s. Engineered tunability of the device switching voltage and on/off ratio is also achieved by varying the single process parameter of contact metal film force (film stress $\times$ film thickness).
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Moiré Engineering in 2D Heterostructures with Process-Induced Strain
Authors:
Tara Peña,
Aditya Dey,
Shoieb A. Chowdhury,
Ahmad Azizimanesh,
Wenhui Hou,
Arfan Sewaket,
Carla L. Watson,
Hesam Askari,
Stephen M. Wu
Abstract:
We report deterministic control over moiré superlattice interference pattern in twisted bilayer graphene by implementing designable device-level heterostrain with process-induced strain engineering, a widely used technique in industrial silicon nanofabrication processes. By depositing stressed thin films onto our twisted bilayer graphene samples, heterostrain magnitude and strain directionality ca…
▽ More
We report deterministic control over moiré superlattice interference pattern in twisted bilayer graphene by implementing designable device-level heterostrain with process-induced strain engineering, a widely used technique in industrial silicon nanofabrication processes. By depositing stressed thin films onto our twisted bilayer graphene samples, heterostrain magnitude and strain directionality can be controlled by stressor film force (film stress x film thickness) and patterned stressor geometry, respectively. We examine strain and moiré interference with Raman spectroscopy through in-plane and moiré-activated phonon mode shifts. Results support systematic C$_{3}$ rotational symmetry breaking and tunable periodicity in moiré superlattices under the application of uniaxial or biaxial heterostrain. Experimental results are validated by molecular statics simulations and density functional theory based first principles calculations. This provides a method to not only tune moiré interference without additional twisting, but also allows for a systematic pathway to explore different van der Waals based moiré superlattice symmetries by deterministic design.
△ Less
Submitted 3 April, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Atomically Thin Yellow Pearl: An Impetus for Thermal Nonlinear Optical Effect Assisted Continuous Wave Random Lasing
Authors:
N. Mandal,
A. Pramanik,
A. Dey,
P. Kumbhakar,
V. Kochat,
A. R. S. Gautam,
N. Glavin,
A. K. Roy,
P. M. Ajayan,
C. S. Tiwary
Abstract:
Above cryogenic temperatures, random laser (RL) emission under continuous wave (CW) optical pum** is often challenging for materials having plenty of lattice defects. Thus, intensive care is required while fabricating the RL device. Synthesis of 2D materials having unique functionality at the atomic limit is necessary for use in such devices. In this work, defects-free 2D yellow pearl (2D-YP) ha…
▽ More
Above cryogenic temperatures, random laser (RL) emission under continuous wave (CW) optical pum** is often challenging for materials having plenty of lattice defects. Thus, intensive care is required while fabricating the RL device. Synthesis of 2D materials having unique functionality at the atomic limit is necessary for use in such devices. In this work, defects-free 2D yellow pearl (2D-YP) has been synthesized from bulk south sea pearl using liquid-phase exfoliation (LPE) technique. Thereafter, 2D-YP has been employed as passive scatterer to achieve CW pumped RL emission from a conventional gain molecule, i.e., Rhodamine B (RhB). Compared to other semiconductor (TiO2) and 2D (Graphene and h-BN) passive scatterers, ~25 times improvement in gain volume is observed for the disordered system consisting of RhB and 2D-YP, i.e., 2D-YP@RhB, which is found to be due to the formation of a large refractive index gradient, as induced by the thermal nonlinear optical (NLO) interaction. Hence, incoherent RL (ic-RL) emission ~591 nm is reported for 2D-YP@RhB at a lowest threshold input pump power and a linewidth of 65 mW and 3 nm, respectively. Additionaly, a clear transition from ic-RL to mode tunable coherent RL (c-RL) emission is also possible by altering the configuration of the 2D-YP@RhB container. Therefore, the newly designed Van der Waals heterostructure, i.e., 2D-YP with intrinsic photon trap** capability may pave an avenue towards develo** future exciting optoelectronic devices.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Machine learning based modelling and optimization in hard turning of AISI D6 steel with newly developed AlTiSiN coated carbide tool
Authors:
A Das,
S R Das,
J P Panda,
A Dey,
K K Gajrani,
N Somani,
N Gupta
Abstract:
In recent times Mechanical and Production industries are facing increasing challenges related to the shift toward sustainable manufacturing. In this article, machining was performed in dry cutting condition with a newly developed coated insert called AlTiSiN coated carbides coated through scalable pulsed power plasma technique in dry cutting condition and a dataset was generated for different mach…
▽ More
In recent times Mechanical and Production industries are facing increasing challenges related to the shift toward sustainable manufacturing. In this article, machining was performed in dry cutting condition with a newly developed coated insert called AlTiSiN coated carbides coated through scalable pulsed power plasma technique in dry cutting condition and a dataset was generated for different machining parameters and output responses. The machining parameters are speed, feed, depth of cut and the output responses are surface roughness, cutting force, crater wear length, crater wear width, and flank wear. The data collected from the machining operation is used for the development of machine learning (ML) based surrogate models to test, evaluate and optimize various input machining parameters. Different ML approaches such as polynomial regression (PR), random forest (RF) regression, gradient boosted (GB) trees, and adaptive boosting (AB) based regression are used to model different output responses in the hard machining of AISI D6 steel. The surrogate models for different output responses are used to prepare a complex objective function for the germinal center algorithm-based optimization of the machining parameters of the hard turning operation.
△ Less
Submitted 30 January, 2022;
originally announced February 2022.
-
On the role of Initial Error Growth in the Skill of Extended Range Prediction of Madden-Julian Oscillation (MJO)
Authors:
Lekshmi S,
Rajib Chattopadhyay,
Manpreet Kaur,
Susmitha Joseph,
R. Phani,
A Dey,
R. Mandal,
AK. Sahai
Abstract:
The seamless forecast approach of subseasonal to seasonal scale variability has been succeeding in the forecast of multiple meteorological scales in a uniform framework. In this paradigm, it is hypothesized that reduction in initial error in dynamical forecast would help to reduce forecast error in extended lead-time up to 2-3 weeks. This is tested in a version of operational extended range foreca…
▽ More
The seamless forecast approach of subseasonal to seasonal scale variability has been succeeding in the forecast of multiple meteorological scales in a uniform framework. In this paradigm, it is hypothesized that reduction in initial error in dynamical forecast would help to reduce forecast error in extended lead-time up to 2-3 weeks. This is tested in a version of operational extended range forecasts based on Climate Forecast System version 2 (CFSv2) developed at Indian Institute of Tropical Meteorology (IITM), Pune. Forecast skills are assessed to understand the role of initial errors on the prediction skill for MJO. A set of lowest and highest initial day error (LIDE & HIDE) cases are defined and the error-growth for these categories are analysed for the strong MJO events during May to September (MJJAS). The MJO forecast initial errors are categorized and defined using the well-known multivariate MJO index introduced by Wheeler &Hendon (2004). The probability distribution of bivariate RMSE and error growth evolution (first order difference of index error for each successive lead days) with respect to extended range lead-time are used as metrics in this analysis. The result showed that initial error is not showing any influence in the skill of model after a lead time of 7-10 days and the error growth remains the same for both set of errors. A rapid error growth evolution of same order is seen for both the classified cases. Further the physical attribution of these errors is studied and found that the errors originate from the events with initial phase in Western Pacific and Indian Ocean. The spatial distribution of OLR and the zonal winds also confirms the same. The study emphasises the importance of better representation of MJO phases especially over Indian ocean in the model to improve the MJO prediction rather than focusing primarily on the initial condition
△ Less
Submitted 11 May, 2021;
originally announced May 2021.
-
Dynamical Properties and Effects of Quantum Diffraction on The Propagation of E-A-Solitary Waves in Three-Component Fermi Plasma
Authors:
Tamal Ghosh,
Suman Pramanick,
Soumya Sarkar,
Ankita Dey,
Swarniv Chandra
Abstract:
Electron Acoustic Solitary structures in Fermi Plasma with two temperature electrons have various applications in space and laboratory-made plasma. Formulation of an adequate theory is important to understand various physical systems with various physical parameters. The motion of two temperature electrons in a quantum Fermi plasma system highly affects the solitary profile of the system. We study…
▽ More
Electron Acoustic Solitary structures in Fermi Plasma with two temperature electrons have various applications in space and laboratory-made plasma. Formulation of an adequate theory is important to understand various physical systems with various physical parameters. The motion of two temperature electrons in a quantum Fermi plasma system highly affects the solitary profile of the system. We study the quantum Fermi plasma system with two temperature electrons where the streaming velocities of the two-electron population are opposite. We consider the quantum hydrodynamic model (QHD) and derive a linear dispersion relation for the system. For the non-linear study of the system, we use the standard perturbation technique to derive KdV-B equation and show the evolution of a solitary profile with different plasma parameters. We analyze the stable Rouge wave structure using NLSE and show simulation results. We study the dynamical properties and phase plot for a two-stream quantum Fermi plasma system with two temperature electrons.
△ Less
Submitted 25 December, 2020;
originally announced December 2020.
-
Time- and frequency-domain two-particle correlations of a driven dissipative Bose-Hubbard model
Authors:
Kingshuk Adhikary,
Anushree Dey,
Arpita Pal,
Subhanka Mal,
Bimalendu Deb
Abstract:
We theoretically investigate the time- and frequency-domain two-particle correlations of a driven dissipative Bose-Hubbard model (BHM) at and near a dissipative phase transition (DPT). We compute Hanbury Brown-Twiss (HBT) type two-particle temporal correlation function $g^2(τ)$ which, as a function of time delay $τ$, exhibits oscillations with frequencies determined by the imaginary part of Liouvi…
▽ More
We theoretically investigate the time- and frequency-domain two-particle correlations of a driven dissipative Bose-Hubbard model (BHM) at and near a dissipative phase transition (DPT). We compute Hanbury Brown-Twiss (HBT) type two-particle temporal correlation function $g^2(τ)$ which, as a function of time delay $τ$, exhibits oscillations with frequencies determined by the imaginary part of Liouvillian gap. As the gap closes near a transition point, the oscillations at that point dies down. For parameters slightly away from the transition point, the HBT correlations show oscillations from super-bunching to anti-bunching regimes. We show that the Fourier transform of HBT correlations into frequency domain provide information about DPT and Liouvillian dynamics. We numerically solve the many-body Lindblad master equation and calculate Wigner distribution of the system in steady state to ascertain DPT.Below certain drive strength, the Fourier transform shows a two-peak structure while above that strength it exhibits either a Lorenzian-like single-peak structure or a structure with two-dips. The width of the single-peak structure is minimum at the phase transition point and the peak of this structure always lies at zero frequency. The positions of the two symmetrical peaks in case of two-peak structure are given by the imaginary parts of the Liouvillian gap while their half width at half maximum (HWHM) is given by the real part of the gap. The positions and the widths of the two dips are also related to low lying eigenvalues of the Liouvillian operator. We discuss quantum statistical properties of the model in terms of the HBT correlation function and its Fourier transform.
△ Less
Submitted 23 March, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Electron-Acoustic Solitary Waves in Fermi Plasma With Two-Temperature Electrons
Authors:
S. Pramanick,
A. Dey,
S. Chandra
Abstract:
Electron Acoustic waves in Fermi Plasma with two temperature electrons have various applications in space and laboratory-made plasma. In some dense plasma systems like the inside of compact stars, Fermi plasma is important. We have studied Fermi plasma system with three components, two temperature electrons, and ions. The hot electrons are mobile and produce restoring force to the system while col…
▽ More
Electron Acoustic waves in Fermi Plasma with two temperature electrons have various applications in space and laboratory-made plasma. In some dense plasma systems like the inside of compact stars, Fermi plasma is important. We have studied Fermi plasma system with three components, two temperature electrons, and ions. The hot electrons are mobile and produce restoring force to the system while cold electrons are immobile and produce inertia to the system. We have studied the dispersion behavior of electron acoustic waves in Fermi plasma with two temperature electrons and investigated its dependence with various plasma parameters. We have investigated KdV-B equation for the solitary profile of Fermi plasma with two temperature electrons and investigated its dependence with various plasma parameters.
△ Less
Submitted 29 August, 2020;
originally announced August 2020.
-
Oscillations of a cantilevered micro beam driven by a viscoelastic flow instability
Authors:
Anita A. Dey,
Yahya Modarres-Sadeghi,
Anke Lindner,
Jonathan P. Rothstein
Abstract:
The interaction of flexible structures with viscoelastic flows can result in very rich dynamics. In this paper, we present the results of the interactions between the flow of a viscoelastic polymer solution and a cantilevered beam in a confined microfluidic geometry. Cantilevered beams with varying length and flexibility were studied. With increasing flow rate and Weissenberg number, the flow tran…
▽ More
The interaction of flexible structures with viscoelastic flows can result in very rich dynamics. In this paper, we present the results of the interactions between the flow of a viscoelastic polymer solution and a cantilevered beam in a confined microfluidic geometry. Cantilevered beams with varying length and flexibility were studied. With increasing flow rate and Weissenberg number, the flow transitioned from a fore-aft symmetric flow to a stable detached vortex upstream of the beam, to a time-dependent unstable vortex shedding. The shedding of the unstable vortex upstream of the beam imposed a time-dependent drag force on the cantilevered beam resulting in flow-induced beam oscillations. The oscillations of the flexible beam were classified into two distinct regimes: a regime with a clear single vortex shedding from upstream of the beam resulting in a sinusoidal beam oscillation pattern with the frequency of oscillation increasing monotonically with Weissenberg number, and a regime at high Weissenberg numbers characterized by 3D chaotic flow instabilities where the frequency of oscillations plateaued. The critical onset of the flow transitions, the mechanism of vortex shedding and the dynamics of the cantilevered beam response are presented in detail here as a function of beam flexibility and flow viscoelasticity.
△ Less
Submitted 9 October, 2019;
originally announced October 2019.
-
Many-body adiabatic passage: Quantum detours around chaos
Authors:
Amit Dey,
Doron Cohen,
Amichay Vardi
Abstract:
We study the many-body dynamics of stimulated Raman adiabatic passage in the presence of on-site interactions. In the classical mean-field limit, explored in Phys. Rev. Lett. {\bf 121}, 250405 (2018), interaction-induced chaos leads to the breakdown of adiabaticity under the quasi-static variation of the parameters, thus producing {\em low} sweep rate boundaries on efficient population transfer. W…
▽ More
We study the many-body dynamics of stimulated Raman adiabatic passage in the presence of on-site interactions. In the classical mean-field limit, explored in Phys. Rev. Lett. {\bf 121}, 250405 (2018), interaction-induced chaos leads to the breakdown of adiabaticity under the quasi-static variation of the parameters, thus producing {\em low} sweep rate boundaries on efficient population transfer. We show that for the corresponding many-body system, alternative quantum pathways from the initial to the target state, open up at even slower sweep rates. These quantum detours avoid the chaotic classical path and hence allow a robust and efficient population transfer.
△ Less
Submitted 24 December, 2018;
originally announced December 2018.
-
Motif-based analysis of power grid robustness under attacks
Authors:
Asim Kumer Dey,
Yulia R. Gel,
H. Vincent Poor
Abstract:
Network motifs are often called the building blocks of networks. Analysis of motifs is found to be an indispensable tool for understanding local network structure, in contrast to measures based on node degree distribution and its functions that primarily address a global network topology. As a result, networks that are similar in terms of global topological properties may differ noticeably at a lo…
▽ More
Network motifs are often called the building blocks of networks. Analysis of motifs is found to be an indispensable tool for understanding local network structure, in contrast to measures based on node degree distribution and its functions that primarily address a global network topology. As a result, networks that are similar in terms of global topological properties may differ noticeably at a local level. In the context of power grids, this phenomenon of the impact of local structure has been recently documented in fragility analysis and power system classification. At the same time, most studies of power system networks still tend to focus on global topological measures of power grids, often failing to unveil hidden mechanisms behind vulnerability of real power systems and their dynamic response to malfunctions. In this paper a pilot study on motif-based analysis of power grid robustness under various types of intentional attacks is presented, with the goal of shedding light on local dynamics and vulnerability of power systems.
△ Less
Submitted 16 July, 2017;
originally announced August 2017.
-
Information Geometry and Quantum Phase Transitions in the Dicke Model
Authors:
Anshuman Dey,
Subhash Mahapatra,
Pratim Roy,
Tapobrata Sarkar
Abstract:
We study information geometry of the Dicke model, in the thermodynamic limit. The scalar curvature $R$ of the Riemannian metric tensor induced on the parameter space of the model is calculated. We analyze this both with and without the rotating wave approximation, and show that the parameter manifold is smooth even at the phase transition, and that the scalar curvature is continuous across the pha…
▽ More
We study information geometry of the Dicke model, in the thermodynamic limit. The scalar curvature $R$ of the Riemannian metric tensor induced on the parameter space of the model is calculated. We analyze this both with and without the rotating wave approximation, and show that the parameter manifold is smooth even at the phase transition, and that the scalar curvature is continuous across the phase boundary.
△ Less
Submitted 24 September, 2012; v1 submitted 23 August, 2012;
originally announced August 2012.