-
Active and inactive contributions to the wall pressure and wall-shear stress in turbulent boundary layers
Authors:
Rahul Deshpande,
Ricardo Vinuesa,
Joseph Klewicki,
Ivan Marusic
Abstract:
A phenomenological description is presented to explain the low-frequency/large-scale contributions to the wall-shear-stress ($τ_w$) and wall-pressure (${p}_w$) spectra of canonical turbulent boundary layers, which are well known to increase with Reynolds number. The explanation is based on the concept of active and inactive motions (Townsend, J. Fluid Mech., vol. 11, 1961) associated with the atta…
▽ More
A phenomenological description is presented to explain the low-frequency/large-scale contributions to the wall-shear-stress ($τ_w$) and wall-pressure (${p}_w$) spectra of canonical turbulent boundary layers, which are well known to increase with Reynolds number. The explanation is based on the concept of active and inactive motions (Townsend, J. Fluid Mech., vol. 11, 1961) associated with the attached-eddy hypothesis. Unique data sets of simultaneously acquired $τ_w$, ${p}_w$ and velocity fluctuation time series in the log region are considered, across friction-Reynolds-number ($Re_τ$) range of $\mathcal{O}$($10^3$) $\lesssim$ $Re_τ$ $\lesssim$ $\mathcal{O}$($10^6$). A recently proposed energy-decomposition methodology (Deshpande et al., J. Fluid Mech., vol. 914, 2021) is implemented to reveal the active and inactive contributions to the $τ_w$- and $p_w$-spectra. Empirical evidence is provided in support of Bradshaw's (J. Fluid Mech., vol. 30, 1967) hypothesis that the inactive motions are responsible for the non-local wall-ward transport of the large-scale inertia-dominated energy, which is produced in the log region by active motions. This explains the large-scale signatures in the $τ_w$-spectrum that are noted, despite negligible large-scale turbulence production near the wall. For wall pressure, active and inactive motions contribute to the $p_w$-spectra at intermediate and large scales, respectively. Their contributions are found to increase with increasing $Re_τ$ due to the broadening and energization of the wall-scaled (attached) eddy hierarchy.
△ Less
Submitted 22 June, 2024;
originally announced June 2024.
-
Report on the AAPM Grand Challenge on deep generative modeling for learning medical image statistics
Authors:
Rucha Deshpande,
Varun A. Kelkar,
Dimitrios Gotsis,
Prabhat Kc,
Rong** Zeng,
Kyle J. Myers,
Frank J. Brooks,
Mark A. Anastasio
Abstract:
The findings of the 2023 AAPM Grand Challenge on Deep Generative Modeling for Learning Medical Image Statistics are reported in this Special Report. The goal of this challenge was to promote the development of deep generative models (DGMs) for medical imaging and to emphasize the need for their domain-relevant assessment via the analysis of relevant image statistics. As part of this Grand Challeng…
▽ More
The findings of the 2023 AAPM Grand Challenge on Deep Generative Modeling for Learning Medical Image Statistics are reported in this Special Report. The goal of this challenge was to promote the development of deep generative models (DGMs) for medical imaging and to emphasize the need for their domain-relevant assessment via the analysis of relevant image statistics. As part of this Grand Challenge, a training dataset was developed based on 3D anthropomorphic breast phantoms from the VICTRE virtual imaging toolbox. A two-stage evaluation procedure consisting of a preliminary check for memorization and image quality (based on the Frechet Inception distance (FID)), and a second stage evaluating the reproducibility of image statistics corresponding to domain-relevant radiomic features was developed. A summary measure was employed to rank the submissions. Additional analyses of submissions was performed to assess DGM performance specific to individual feature families, and to identify various artifacts. 58 submissions from 12 unique users were received for this Challenge. The top-ranked submission employed a conditional latent diffusion model, whereas the joint runners-up employed a generative adversarial network, followed by another network for image superresolution. We observed that the overall ranking of the top 9 submissions according to our evaluation method (i) did not match the FID-based ranking, and (ii) differed with respect to individual feature families. Another important finding from our additional analyses was that different DGMs demonstrated similar kinds of artifacts. This Grand Challenge highlighted the need for domain-specific evaluation to further DGM design as well as deployment. It also demonstrated that the specification of a DGM may differ depending on its intended use.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Characteristics of active and inactive motions in high-Reynolds-number turbulent boundary layers
Authors:
Rahul Deshpande,
Ricardo Vinuesa,
Ivan Marusic
Abstract:
Wall-scaled (attached) eddies play a significant role in the overall drag experienced in high-Reynolds-number turbulent boundary layers (TBLs). This study aims to delve into the underlying mechanisms driving this phenomenon by dissecting the active and inactive components of these attached eddies, as initially proposed by Townsend (1976). Employing a recently introduced energy-decomposition scheme…
▽ More
Wall-scaled (attached) eddies play a significant role in the overall drag experienced in high-Reynolds-number turbulent boundary layers (TBLs). This study aims to delve into the underlying mechanisms driving this phenomenon by dissecting the active and inactive components of these attached eddies, as initially proposed by Townsend (1976). Employing a recently introduced energy-decomposition scheme, we analyze TBL datasets covering a wide range of Reynolds numbers ($Re_τ$ $\sim$ $\mathcal{O}$(10$^{3}$)--$\mathcal{O}$(10$^{6}$)). This analysis provides empirical evidence of the distinct contributions of these components to drag generation, and reveals that while active motions are responsible solely for generating Reynolds shear stresses, inactive motions are crucial for transporting streamwise momentum from the logarithmic region to the wall, thus corroborating earlier hypotheses in the literature.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Pressure drag reduction via imposition of spanwise wall oscillations on a rough wall
Authors:
Rahul Deshpande,
Aman G. Kidanemariam,
Ivan Marusic
Abstract:
The present study tests the efficacy of the well-known viscous drag reduction strategy of imposing spanwise wall oscillations to reduce pressure drag contributions in a transitional- and fully-rough turbulent wall flow. This is achieved by conducting a series of direct numerical simulations of a turbulent flow over two-dimensional (spanwise aligned) semi-cylindrical rods, placed periodically along…
▽ More
The present study tests the efficacy of the well-known viscous drag reduction strategy of imposing spanwise wall oscillations to reduce pressure drag contributions in a transitional- and fully-rough turbulent wall flow. This is achieved by conducting a series of direct numerical simulations of a turbulent flow over two-dimensional (spanwise aligned) semi-cylindrical rods, placed periodically along the streamwise direction with varying streamwise spacing. Surface oscillations, imposed at fixed viscous-scaled actuation parameters optimum for smooth wall drag reduction, are found to yield substantial drag reduction (>25%) for all the rough wall cases, maintained at matched roughness Reynolds numbers. While the total drag reduction is due to a drop in both viscous and pressure drag in the case of transitionally-rough flow (i.e. with large inter-rod spacing), it is solely associated with pressure drag reduction for the fully-rough cases (i.e. with small inter-rod spacings), with the latter being reported for the first time. The study finds that pressure drag reduction in all cases is caused by the attenuation of the vortex shedding activity in the roughness wake, in response to wall-oscillation frequencies that are of the same order as the vortex shedding frequencies. Contrary to speculations in the literature, this study confirms that the mechanism behind pressure drag reduction, achieved via imposition of spanwise oscillations, is independent from the viscous drag reduction. This mechanism is responsible for weakening of the Reynolds stresses and increase in base pressure in the roughness wake, explaining the pressure drag reduction observed by past studies, across varying roughness heights and geometries.
△ Less
Submitted 11 December, 2023; v1 submitted 25 August, 2023;
originally announced August 2023.
-
Reynolds-number effects on the outer region of adverse-pressure-gradient turbulent boundary layers
Authors:
Rahul Deshpande,
Aron van den Bogaard,
Ricardo Vinuesa,
Luka Lindić,
Ivan Marusic
Abstract:
We study the Reynolds-number effects on the outer region of moderate adverse-pressure-gradient (APG) turbulent boundary layers (TBLs) and find that their small scale energy reduces with increasing friction Reynolds-number ($Re_τ$). The trend is based on analyzing APG TBL data across 600 $\lesssim$ $Re_τ$ $\lesssim$ 7000, and contrasts with the negligible variation in small scale energy noted for c…
▽ More
We study the Reynolds-number effects on the outer region of moderate adverse-pressure-gradient (APG) turbulent boundary layers (TBLs) and find that their small scale energy reduces with increasing friction Reynolds-number ($Re_τ$). The trend is based on analyzing APG TBL data across 600 $\lesssim$ $Re_τ$ $\lesssim$ 7000, and contrasts with the negligible variation in small scale energy noted for canonical wall flows. The datasets considered include those from a well-resolved numerical simulation (Pozuelo et al. 2022), which provides access to an APG TBL maintained at near-equilibrium conditions across 1000 $\lesssim$ $Re_τ$ $\lesssim$ 2000, with a well-defined flow history, and a new high-$Re_τ$ ($\sim$ 7000) experimental study from the large Melbourne wind tunnel, with its long test section modified to permit development of an APG TBL from a 'canonical' upstream condition. The decrease in small scale energy with $Re_τ$ is revealed via decomposing the streamwise normal stresses into small and large scale contributions, based on a sharp spectral cut-off. The origin for this trend is traced back to the production of turbulent kinetic energy in an APG TBL, the small scale contribution to which is also found to decrease with $Re_τ$ in the outer region. The conclusion is reaffirmed by investigating attenuation of streamwise normal stresses due to changing spatial-resolutions of the numerical grid/hotwire sensors, which reduces with increasing $Re_τ$ and is found to be negligible at $Re_τ$ $\sim$ 7000 in this study. The results emphasize that new scaling arguments and spatial-resolution correction schemes should be tested rigorously across a broad $Re_τ$ range, particularly for the outer region of pressure gradient TBLs.
△ Less
Submitted 25 June, 2024; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Identifying regions of importance in wall-bounded turbulence through explainable deep learning
Authors:
Andres Cremades,
Sergio Hoyas,
Rahul Deshpande,
Pedro Quintero,
Martin Lellep,
Will Junghoon Lee,
Jason Monty,
Nicholas Hutchins,
Moritz Linkmann,
Ivan Marusic,
Ricardo Vinuesa
Abstract:
Despite its great scientific and technological importance, wall-bounded turbulence is an unresolved problem in classical physics that requires new perspectives to be tackled. One of the key strategies has been to study interactions among the energy-containing coherent structures in the flow. Such interactions are explored in this study for the first time using an explainable deep-learning method.…
▽ More
Despite its great scientific and technological importance, wall-bounded turbulence is an unresolved problem in classical physics that requires new perspectives to be tackled. One of the key strategies has been to study interactions among the energy-containing coherent structures in the flow. Such interactions are explored in this study for the first time using an explainable deep-learning method. The instantaneous velocity field obtained from a turbulent channel flow simulation is used to predict the velocity field in time through a U-net architecture. Based on the predicted flow, we assess the importance of each structure for this prediction using the game-theoretic algorithm of SHapley Additive exPlanations (SHAP). This work provides results in agreement with previous observations in the literature and extends them by revealing that the most important structures in the flow are not necessarily the ones with the highest contribution to the Reynolds shear stress. We also apply the method to an experimental database, where we can identify completely new structures based on their importance score. This framework has the potential to shed light on numerous fundamental phenomena of wall-bounded turbulence, including novel strategies for flow control.
△ Less
Submitted 19 February, 2024; v1 submitted 2 February, 2023;
originally announced February 2023.
-
On the relationship between manipulated inter-scale phase and energy-efficient turbulent drag reduction
Authors:
Rahul Deshpande,
Dileep Chandran,
Alexander J. Smits,
Ivan Marusic
Abstract:
We investigate the role of inter-scale interactions in the high-Reynolds number skin-friction drag reduction strategy reported by Marusic et al. (Nat. Commun., vol. 12, 2021). The strategy involves imposing relatively low-frequency streamwise travelling waves of spanwise velocity at the wall to actuate the drag generating outer-scales. This approach has proven to be more energy-efficient than the…
▽ More
We investigate the role of inter-scale interactions in the high-Reynolds number skin-friction drag reduction strategy reported by Marusic et al. (Nat. Commun., vol. 12, 2021). The strategy involves imposing relatively low-frequency streamwise travelling waves of spanwise velocity at the wall to actuate the drag generating outer-scales. This approach has proven to be more energy-efficient than the conventional method of directly targeting the drag producing inner-scales, which typically requires actuation at higher frequencies. Notably, it is observed that actuating the outer-scales at low frequencies leads to a substantial attenuation of the major drag producing inner-scales, suggesting that the actuations affect the non-linear inner-outer coupling inherently existing in wall-bounded flows. In the present study, we find that increased drag reduction, through imposition of spanwise wall oscillations, is always associated with an increased coupling between the inner and outer scales. This enhanced coupling emerges through manipulation of the phase relationships between these triadically linked scales, with the actuation forcing the entire range of energy-containing scales, from the inner (viscous) to the outer (inertial) scales, to be more in-phase. We also find that a similar enhancement of this non-linear coupling, via manipulation of the inter-scale phase relationships, occurs with increasing Reynolds number for canonical turbulent boundary layers. This indicates improved efficacy of the energy-efficient drag reduction strategy at very high Reynolds numbers, where the energised outer-scales are known to more strongly superimpose and modulate the inner-scales. Leveraging the inter-scale interactions, therefore, offers a plausible mechanism for achieving energy-efficient drag reduction at high Reynolds numbers.
△ Less
Submitted 25 August, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Investigating the robustness of a learning-based method for quantitative phase retrieval from propagation-based x-ray phase contrast measurements under laboratory conditions
Authors:
Rucha Deshpande,
Ashish Avachat,
Frank J. Brooks,
Mark A. Anastasio
Abstract:
Quantitative phase retrieval (QPR) in propagation-based x-ray phase contrast imaging of heterogeneous and structurally complicated objects is challenging under laboratory conditions due to partial spatial coherence and polychromaticity. A learning-based method (LBM) provides a non-linear approach to this problem while not being constrained by restrictive assumptions about object properties and bea…
▽ More
Quantitative phase retrieval (QPR) in propagation-based x-ray phase contrast imaging of heterogeneous and structurally complicated objects is challenging under laboratory conditions due to partial spatial coherence and polychromaticity. A learning-based method (LBM) provides a non-linear approach to this problem while not being constrained by restrictive assumptions about object properties and beam coherence. In this work, a LBM was assessed for its applicability under practical scenarios by evaluating its robustness and generalizability under typical experimental variations. Towards this end, an end-to-end LBM was employed for QPR under laboratory conditions and its robustness was investigated across various system and object conditions. The robustness of the method was tested via varying propagation distances and its generalizability with respect to object structure and experimental data was also tested. Although the LBM was stable under the studied variations, its successful deployment was found to be affected by choices pertaining to data pre-processing, network training considerations and system modeling. To our knowledge, we demonstrated for the first time, the potential applicability of an end-to-end learning-based quantitative phase retrieval method, trained on simulated data, to experimental propagation-based x-ray phase contrast measurements acquired under laboratory conditions. We considered conditions of polychromaticity, partial spatial coherence, and high noise levels, typical to laboratory conditions. This work further explored the robustness of this method to practical variations in propagation distances and object structure with the goal of assessing its potential for experimental use. Such an exploration of any LBM (irrespective of its network architecture) before practical deployment provides an understanding of its potential behavior under experimental settings.
△ Less
Submitted 2 November, 2022;
originally announced November 2022.
-
Evidence that superstructures comprise of self-similar coherent motions in high $Re_τ$ boundary layers
Authors:
Rahul Deshpande,
Charitha M. de Silva,
Ivan Marusic
Abstract:
We present experimental evidence that the superstructures in turbulent boundary layers comprise of smaller, geometrically self-similar coherent motions. The evidence comes from identifying and analyzing instantaneous superstructures from large-scale particle image velocimetry datasets acquired at high Reynolds numbers, capable of capturing streamwise elongated motions extending up to 12 times the…
▽ More
We present experimental evidence that the superstructures in turbulent boundary layers comprise of smaller, geometrically self-similar coherent motions. The evidence comes from identifying and analyzing instantaneous superstructures from large-scale particle image velocimetry datasets acquired at high Reynolds numbers, capable of capturing streamwise elongated motions extending up to 12 times the boundary layer thickness. Given the challenge in identifying the constituent motions of the superstructures based on streamwise velocity signatures, a new approach is adopted that analyzes the wall-normal velocity fluctuations within these very long motions, which reveals the constituent motions unambiguously. The conditional streamwise energy spectra of the wall-normal fluctuations, corresponding exclusively to the superstructure region, are found to exhibit the well-known distance-from-the-wall scaling in the intermediate scale range. Similar characteristics are also exhibited by the Reynolds shear stress co-spectra estimated for the superstructure region, suggesting that geometrically self-similar motions are the constituent motions of these very-large-scale structures. Investigation of the spatial organization of the wall-normal momentum-carrying eddies also lends empirical support to the concatenation hypothesis for the formation of the superstructures. Association between the superstructures and self-similar motions is reaffirmed on comparing the vertical correlations of the momentum carrying motions, which are found to match with the mean correlations. The mean vertical coherence of these motions, investigated for the log-region across three decades of Reynolds numbers, exhibits a unique distance-from-the-wall scaling invariant with Reynolds number. The findings support the prospect for modelling these dynamically significant motions via data-driven coherent structure-based models.
△ Less
Submitted 8 July, 2023; v1 submitted 12 October, 2022;
originally announced October 2022.
-
Data-driven enhancement of coherent structure-based models for predicting instantaneous wall turbulence
Authors:
Rahul Deshpande,
Charitha M. de Silva,
Myoungkyu Lee,
Jason P. Monty,
Ivan Marusic
Abstract:
Predictions of the spatial representation of instantaneous wall-bounded flows, via coherent structure-based models, are highly sensitive to the geometry of the representative structures employed by them. In this study, we propose a methodology to extract the three-dimensional (3-D) geometry of the statistically significant eddies from multi-point wall-turbulence datasets, for direct implementation…
▽ More
Predictions of the spatial representation of instantaneous wall-bounded flows, via coherent structure-based models, are highly sensitive to the geometry of the representative structures employed by them. In this study, we propose a methodology to extract the three-dimensional (3-D) geometry of the statistically significant eddies from multi-point wall-turbulence datasets, for direct implementation into these models to improve their predictions. The methodology is employed here for reconstructing a 3-D statistical picture of the inertial wall coherent turbulence for all canonical wall-bounded flows, across a decade of friction Reynolds number ($Re_τ$). These structures are responsible for the $Re_τ$-dependence of the skin-friction drag and also facilitate the inner-outer interactions, making them key targets of structure-based models. The empirical analysis brings out the geometric self-similarity of the large-scale wall-coherent motions and also suggests the hairpin packet as the representative flow structure for all wall-bounded flows, thereby aligning with the framework on which the attached eddy model (AEM) is based. The same framework is extended here to also model the very-large-scaled motions, with a consideration of their differences in internal versus external flows. Implementation of the empirically-obtained geometric scalings for these large structures into the AEM is shown to enhance the instantaneous flow predictions for all three velocity components. Finally, an active flow control system driven by the same geometric scalings is conceptualized, towards favourably altering the influence of the wall coherent motions on the skin-friction drag.
△ Less
Submitted 22 October, 2021; v1 submitted 4 July, 2021;
originally announced July 2021.
-
Active and inactive components of the streamwise velocity in wall-bounded turbulence
Authors:
Rahul Deshpande,
Jason P. Monty,
Ivan Marusic
Abstract:
Townsend (1961) introduced the concept of active and inactive motions for wall-bounded turbulent flows, where the active motions are solely responsible for producing the Reynolds shear stress, the key momentum transport term in these flows. While the wall-normal component of velocity is associated exclusively with the active motions, the wall-parallel components of velocity are associated with bot…
▽ More
Townsend (1961) introduced the concept of active and inactive motions for wall-bounded turbulent flows, where the active motions are solely responsible for producing the Reynolds shear stress, the key momentum transport term in these flows. While the wall-normal component of velocity is associated exclusively with the active motions, the wall-parallel components of velocity are associated with both active and inactive motions. In this paper, we propose a method to segregate the active and inactive components of the 2-D energy spectrum of the streamwise velocity, thereby allowing us to test the self-similarity characteristics of the former which are central to theoretical models for wall-turbulence. The approach is based on analyzing datasets comprising two-point streamwise velocity signals coupled with a spectral linear stochastic estimation (SLSE) based procedure. The data considered span a friction Reynolds number range $Re_τ$ $\sim$ ${\mathcal{O}}$($10^3$) -- ${\mathcal{O}}$($10^4$). The procedure linearly decomposes the full 2-D spectrum ($Φ$) into two components, $Φ_{ia}$ and $Φ_{a}$, comprising contributions predominantly from the inactive and active motions, respectively. This is confirmed by $Φ_{a}$ exhibiting wall-scaling, for both streamwise and spanwise wavelengths, corresponding well with the Reynolds shear stress cospectra reported in the literature. Both $Φ_{a}$ and $Φ_{ia}$ are found to depict prominent self-similar characteristics in the inertially dominated region close to the wall, suggestive of contributions from Townsend's attached eddies. Inactive contributions from the attached eddies reveal pure $k^{-1}$-scaling for the associated 1-D spectra (where $k$ is the streamwise/spanwise wavenumber), lending empirical support to the attached eddy model of Perry & Chong (1982).
△ Less
Submitted 6 September, 2020;
originally announced September 2020.
-
Direct characterization of near-field coupling in gap plasmon-based metasurfaces
Authors:
Rucha Deshpande,
Vladimir A. Zenin,
Fei Ding,
N. Asger Mortensen,
Sergey I. Bozhevolnyi
Abstract:
Metasurfaces based on gap surface-plasmon resonators allow one to arbitrarily control the phase, amplitude and polarization of reflected light with high efficiency. However, the performance of densely-packed metasurfaces is reduced, often quite significantly, in comparison with simple analytical predictions. We argue that this reduction is mainly because of the near-field coupling between metasurf…
▽ More
Metasurfaces based on gap surface-plasmon resonators allow one to arbitrarily control the phase, amplitude and polarization of reflected light with high efficiency. However, the performance of densely-packed metasurfaces is reduced, often quite significantly, in comparison with simple analytical predictions. We argue that this reduction is mainly because of the near-field coupling between metasurface elements, which results in response from each element being different from the one anticipated by design simulations, which are commonly conducted for each individual element being placed in an artificial periodic arrangement. In order to study the influence of near-field coupling, we fabricate meta-elements of varying sizes arranged in quasi-periodic arrays so that the immediate environment of same size elements is different for those located in the middle and at the border of the arrays. We study the near-field using a phase-resolved scattering-type scanning near-field optical microscopy (s-SNOM) and conducting numerical simulations. By comparing the near-field maps from elements of the same size but different placements we evaluate the near-field coupling strength, which is found to be significant for large and densely packed elements. This technique is quite generic and can be used practically for any metasurface type in order to precisely measure the near-field response from each individual element and identify malfunctioning ones, providing feedback to their design and fabrication, thereby allowing one to improve the efficiency of the whole metasurface.
△ Less
Submitted 26 September, 2018;
originally announced September 2018.
-
Multifunctional meta-mirror: polarization splitting and focusing
Authors:
Sergejs Boroviks,
Rucha A. Deshpande,
N. Asger Mortensen,
Sergey I. Bozhevolnyi
Abstract:
Metasurfaces are paving the way to improve traditional optical components by integrating multiple functionalities into one optically flat metasurface design. We demonstrate the implementation of a multifunctional gap surface plasmon-based metasurface which, in reflection mode, splits orthogonal linear light polarizations and focuses into different focal spots. The fabricated configuration consists…
▽ More
Metasurfaces are paving the way to improve traditional optical components by integrating multiple functionalities into one optically flat metasurface design. We demonstrate the implementation of a multifunctional gap surface plasmon-based metasurface which, in reflection mode, splits orthogonal linear light polarizations and focuses into different focal spots. The fabricated configuration consists of 50 nm thick gold nanobricks with different lateral dimensions, organized in an array of 240 nm x 240 nm unit cells on the top of a 50 nm thick silicon dioxide layer, which is deposited on an optically thick reflecting gold substrate. Our device features high efficiency (up to ~65%) and polarization extinction ratio (up to ~30 dB), exhibiting broadband response in the near-infrared band (750-950 nm wavelength) with the focal length dependent on the wavelength of incident light. The proposed optical component can be forthrightly integrated into photonic circuits or fiber optic devices.
△ Less
Submitted 24 October, 2017; v1 submitted 13 September, 2017;
originally announced September 2017.
-
Resolved Hubble Space spectroscopy of ultracool binary systems
Authors:
E. L. Martin,
W. Brandner,
H. Bouy,
G. Basri,
J. Davis,
R. Deshpande,
M. Montgomery
Abstract:
Using the low-resolution mode of the Space Telescope Imaging Spectrograph (STIS) aboard the \emph{Hubble Space Telescope} (HST), we have obtained spatially resolved spectra of 20 ultracool dwarfs. 18 of them belong to 9 known very low-mass binary systems with angular separations in the range 0.37-0.098 arcseconds. We have derived spectral types in the range dM7.5 to dL6 from the PC3 index, and b…
▽ More
Using the low-resolution mode of the Space Telescope Imaging Spectrograph (STIS) aboard the \emph{Hubble Space Telescope} (HST), we have obtained spatially resolved spectra of 20 ultracool dwarfs. 18 of them belong to 9 known very low-mass binary systems with angular separations in the range 0.37-0.098 arcseconds. We have derived spectral types in the range dM7.5 to dL6 from the PC3 index, and by comparing our STIS spectra with ground-based spectra of similar spectral resolution from Mart{\'ı}n et al. (1999). We have searched for H$_α$ emission in each object but it was clearly detected in only 2 of them. We find that the distribution of H$_α$ emission in our sample is statistically different from that of single field dwarfs, suggesting an intriguing anticorrelation between chromospheric activity and binarity for M7--M9.5 dwarfs. We provide measuments of the strength of the main photospheric features and the PC3 index, and we derive calibrations of spectral subclasses versus F814W and K-band absolute magnitudes for a subset of 10 dwarfs in 5 binaries that have known trigonometric parallaxes.
△ Less
Submitted 4 May, 2006;
originally announced May 2006.