Showing 1–50 of 75 results for author: De Oliveira, R

Interference of ultrahigh frequency acoustic phonons from distant quasi-continuous sources

Authors: C. Xiang, E. R. Cardozo de Oliveira, S. Sandeep, K. Papatryfonos, M. Morassi, L. Le Gratiet, A. Harouri, I. Sagnes, A. Lemaitre, O. Ortiz, M. Esmann, N. D. Lanzillotti-Kimura

Abstract: The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic s… ▽ More The generation of propagating acoustic waves is essential for telecommunication applications, quantum technologies, and sensing. Up to now, the electrical generation has been at the core of most implementations, but is technologically limited to a few gigahertz. Overcoming this frequency limit holds the prospect of faster modulators, quantum acoustics at higher working temperatures, nanoacoustic sensing from smaller volumes. Alternatively, the optical excitation of acoustic resonators has unlocked frequencies up to 1 THz, but in most cases, the acoustic energy cannot be efficiently extracted from the resonator into a propagating wave. Here, we demonstrate a quasi-continuous and coherent source of 20 GHz acoustic phonons, based on a ridge waveguide, structured in the vertical direction as a high-Q acousto-optic resonator. The high frequency phonons propagate up to 20 $μ$m away from the source, with a decay rate of $\sim$1.14 dB/$μ$m. We demonstrate the coherence between acoustic phonons generated from two distant sources through spatio-temporal interference. This concept could be scaled up to a larger number of sources, which enable a new generation of optically programmed, reconfigurable nanoacoustic devices and applications. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Polarization-controlled Brillouin scattering in elliptical optophononic resonators

Authors: Anne Rodriguez, Elham Mehdi, Priya, Edson R. Cardozo de Oliveira, Martin Esmann, Norberto Daniel Lanzillotti-Kimura

Abstract: The fast-growing development of optomechanical applications has motivated advancements in Brillouin scattering research. In particular, the study of high frequency acoustic phonons at the nanoscale is interesting due to large range of interactions with other excitations in matter. However, standard Brillouin spectroscopy schemes rely on fixed wavelength filtering, which limits the usefulness for t… ▽ More The fast-growing development of optomechanical applications has motivated advancements in Brillouin scattering research. In particular, the study of high frequency acoustic phonons at the nanoscale is interesting due to large range of interactions with other excitations in matter. However, standard Brillouin spectroscopy schemes rely on fixed wavelength filtering, which limits the usefulness for the study of tunable optophononic resonators. It has been recently demonstrated that elliptical optophononic micropillar resonators induce different energy-dependent polarization states for the Brillouin and the elastic Rayleigh scattering, and that a polarization filtering setup could be implemented to increase the contrast between the inelastic and elastic scattering of the light. An optimal filtering configuration can be reached when the polarization states of the laser and the Brillouin signal are orthogonal from each other. In this work, we theoretically investigate the parameters of such polarization-based filtering technique to enhance the efficiency of Brillouin scattering detection. For the filtering optimization, we explore the initial wavelength and polarization state of the incident laser, as well as in the ellipticity of the micropillars, and reach an almost optimal configuration for nearly background-free Brillouin detection. Our findings are one step forward on the efficient detection of Brillouin scattering in nanostructures for potential applications in fields such as optomechanics and quantum communication. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Characterisation of resistive MPGDs with 2D readout

Authors: L. Scharenberg, F. Brunbauer, H. Danielson, Z. Fang, K. J. Flöthner, F. Garcia, D. Janssens, M. Lisowska, J. Liu, Y. Lyu, B. Mehl, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, O. Pizzirusso, L. Ropelewski, J. Samarati, M. Shao, A. Teixeira, M. Van Stenis, R. Veenhof, Z. Zhang, Y. Zhou

Abstract: Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detecto… ▽ More Micro-Pattern Gaseous Detectors (MPGDs) with resistive anode planes provide intrinsic discharge robustness while maintaining good spatial and time resolutions. Typically read out with 1D strips or pad structures, here the characterisation results of resistive anode plane MPGDs with 2D strip readout are presented. A uRWELL prototype is investigated in view of its use as a reference tracking detector in a future gaseous beam telescope. A MicroMegas prototype with a fine-pitch mesh (730 line-pairs-per-inch) is investigated, both for comparison and to profit from the better field uniformity and thus the ability to operate the detector more stable at high gains. Furthermore, the measurements are another application of the RD51 VMM3a/SRS electronics. △ Less

Submitted 6 February, 2024; originally announced February 2024.

FAT-GEMs: (Field Assisted) Transparent Gaseous-Electroluminescence Multipliers

Authors: S. Leardini, A. Sáa-Hernández, M. Kuźniak, D. González-Díaz, C. D. R. Azevedo, F. Lucas, P. Amedo, A. F. V. Cortez, D. Fernández-Posada, B. Mehl, G. Nieradka, R. de Oliveira, V. Peskov, T. Sworobowicz, S. Williams

Abstract: The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pre… ▽ More The idea of implementing electroluminescence-based amplification through transparent multi-hole structures (FAT-GEMs) has been entertained for some time. Arguably, for such a technology to be attractive it should perform at least at a level comparable to conventional alternatives based on wires or meshes. We present now a detailed calorimetric study carried out for 5.9~keV X-rays in xenon, for pressures ranging from 2 to 10~bar, resorting to different geometries, production and post-processing techniques. At a reference voltage 5~times above the electroluminescence threshold ($E_{EL,th}\sim0.7$~kV/cm/bar), the number of photoelectrons measured for the best structure was found to be just 18\%~below that obtained for a double-mesh with the same thickness and at the same distance. The energy resolution stayed within 10\% (relative) of the double-mesh value. An innovative characteristic of the structure is that vacuum ultraviolet (VUV) transparency of the polymethyl methacrylate (PMMA) substrate was achieved, effectively, through tetraphenylbutadiene (TPB) coating of the electroluminescence channels combined with indium tin oxide (ITO) coating of the electrodes. This resulted in a $\times 2.25$-increased optical yield (compared to the bare structure), that was found to be in good agreement with simulations if assuming a TPB wavelength-shifting-efficiency at the level of WLSE=0.74-1.28, compatible with expected values. This result, combined with the stability demonstrated for the TPB coating under electric field (over 20~h of continuous operation), shows great potential to revolutionize electroluminescence-based instrumentation. △ Less

Submitted 28 February, 2024; v1 submitted 18 January, 2024; originally announced January 2024.

Journal ref: Front. Detect. Sci. Technol 2, 1373235 (2024)

Time Projection Chamber for GADGET II

Authors: Ruchi Mahajan, T. Wheeler, E. Pollacco, C. Wrede, A. Adams, H. Alvarez-Pol, A. Andalib, A. Anthony, Y. Ayyad, D. Bazin, T. Budner, M. Cortesi, J. Dopfer, M. Friedman, A. Jaros, D. Perez-Loureiro, B. Mehl, R. De Oliveira, L. J. Sun, J. Surbrook

Abstract: Background: The established GADGET detection system, designed for measuring weak, low-energy $β$-delayed proton decays, features a gaseous Proton Detector with MICROMEGAS readout for calorimetric particle detection, surrounded by a Segmented Germanium Array for high-resolution prompt $γ$-ray detection. Purpose: To upgrade GADGET's Proton Detector to operate as a compact Time Projection Chamber (TP… ▽ More Background: The established GADGET detection system, designed for measuring weak, low-energy $β$-delayed proton decays, features a gaseous Proton Detector with MICROMEGAS readout for calorimetric particle detection, surrounded by a Segmented Germanium Array for high-resolution prompt $γ$-ray detection. Purpose: To upgrade GADGET's Proton Detector to operate as a compact Time Projection Chamber (TPC) for the detection, 3D imaging and identification of low-energy $β$-delayed single- and multi-particle emissions mainly of interest to astrophysical studies. Method: A new high granularity MM board with 1024 pads has been designed, fabricated, installed and tested. A high-density data acquisition system based on Generic Electronics for TPCs has been installed and optimized to record and process the gas avalanche signals collected on the readout pads. The TPC's performance has been tested using a $^{220}$Rn $α$-particle source and cosmic-ray muons. In addition, decay events in the TPC have been simulated by adapting the ATTPCROOT data analysis framework. Further, a novel application of 2D convolutional neural networks for GADGET II event classification is introduced. Results: The GADGET II TPC is capable of detecting and identifying $α$-particles, as well as measuring their track direction, range, and energy. It has also been demonstrated that the GADGET II TPC is capable of tracking cosmic-ray muons. In addition to being one of the first generation of micro pattern gaseous detectors to utilize a resistive anode applied to low-energy nuclear physics, the GADGET II TPC will also be the first TPC surrounded by a high-efficiency array of high-purity germanium $γ$-ray detectors. \textbf{Conclusions:} The TPC of GADGET II has been designed, fabricated, tested, and is ready for operation at the FRIB for radioactive beam-line experiments. △ Less

Submitted 19 December, 2023; originally announced January 2024.

Pixel detector hybridization and integration with anisotropic conductive adhesives

Authors: Alexander Volker, Janis Viktor Schmidt, Dominik Dannheim, Peter Svihra, Mateus Vicente Barreto Pinto, Rui de Oliveira, Justus Braach, Xiao Yang, Marie Ruat, Débora Magalhaes, Matteo Centis Vignali, Giovanni Calderini, Helge Kristiansen

Abstract: A reliable and cost-effective interconnect technology is required for the development of hybrid pixel detectors. The interconnect technology needs to be adapted for the pitch and die sizes of the respective applications. For small-scale applications and during the ASIC and sensor development phase, interconnect technologies must also be suitable for the assembly of single-dies typically available… ▽ More A reliable and cost-effective interconnect technology is required for the development of hybrid pixel detectors. The interconnect technology needs to be adapted for the pitch and die sizes of the respective applications. For small-scale applications and during the ASIC and sensor development phase, interconnect technologies must also be suitable for the assembly of single-dies typically available from Multi-Project-Wafer submissions. Within the CERN EP R&D program and the AIDAinnova collaboration, innovative and scalable hybridization concepts are under development for pixel-detector applications in future colliders. This contribution presents recent results of a newly developed in-house single-die interconnection process based on Anisotropic Conductive Adhesives (ACA). The ACA interconnect technology replaces solder bumps with conductive micro-particles embedded in an epoxy layer applied as either film or paste. The electro-mechanical connection between the sensor and ASIC is achieved via thermocompression of the ACA using a flip-chip device bonder. A specific pixel-pad topology is required to enable the connection via micro-particles and create cavities into which excess epoxy can flow. This pixel-pad topology is achieved with an in-house Electroless Nickel Immersion Gold process that is also under development within the project. The ENIG and ACA processes are qualified with a variety of different ASICs, sensors, and dedicated test structures, with pad diameters ranging from 12 μm to 140 μm and pitches between 20 μm and 1.3 mm. The produced assemblies are characterized electrically, with radioactive-source exposures, and in tests with high-momentum particle beams. A focus is placed on recent optimization of the plating and interconnect processes, resulting in an improved plating uniformity and interconnect yield. △ Less

Submitted 18 March, 2024; v1 submitted 15 December, 2023; originally announced December 2023.

Comments: Procceding to IPRD23 conference in Siena 2023

Effects of the size and concentration of depleting agents on the stabilization of the double-helix structure and DNA condensation: a single molecule force spectroscopy study

Authors: R. M. de Oliveira, M. S. Rocha

Abstract: We perform a single molecule force spectroscopy study to characterize the role of the size (molecular weight) and concentration of depleting agents on DNA condensation and on the stabilization of the double-helix structure, showing that important features such as the threshold concentration for DNA condensation, the force in which the melting plateau occurs and its average length strongly depend o… ▽ More We perform a single molecule force spectroscopy study to characterize the role of the size (molecular weight) and concentration of depleting agents on DNA condensation and on the stabilization of the double-helix structure, showing that important features such as the threshold concentration for DNA condensation, the force in which the melting plateau occurs and its average length strongly depend on the depletant size chosen. Such results are potentially important to understand how the presence of surrounding macromolecules influences DNA stabilization inside living cells and therefore advance in the understanding of the crowded cell environment on DNA-related functions. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Elliptical micropillars for efficient generation and detection of coherent acoustic phonons

Authors: Chushuang Xiang, Anne Rodriguez, Edson Rafael Cardozo de Oliveira, Luc Le Gratiet, Isabelle Sagnes, Martina Morassi, Aristide Lemaitre, Norberto Daniel Lanzillotti-Kimura

Abstract: Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally de… ▽ More Coherent acoustic phonon generation and detection assisted by optical resonances are at the core of efficient optophononic transduction processes. However, when dealing with a single optical resonance, the optimum generation and detection conditions take place at different laser wavelengths, i.e. different detunings from the cavity mode. In this work, we theoretically propose and experimentally demonstrate the use of elliptical micropillars to reach these conditions simultaneously at a single wavelength. Elliptical micropillar optophononic resonators present two optical modes with orthogonal polarizations at different wavelengths. By employing a cross-polarized scheme pump-probe experiment, we exploit the mode splitting and couple the pump beam to one mode while the probe is detuned from the other one. In this way, at a particular micropillar ellipticity, both phonon generation and detection processes are enhanced. We report an enhancement of a factor of ~3.1 when comparing the signals from elliptical and circular micropillars. Our findings constitute a step forward in tailoring the light-matter interaction for more efficient ultrahigh-frequency optophononic devices. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 10 pages, 5 figures

Effects of surface roughness and top layer thickness on the performance of Fabry-Perot cavities and responsive open resonators based on distributed Bragg reflectors

Authors: Konstantinos Papatryfonos, Edson Rafael Cardozo de Oliveira, Norberto Daniel Lanzillotti-Kimura

Abstract: Optical and acoustic resonators based on distributed Bragg reflectors (DBRs) hold significant potential across various domains, from lasers to quantum technologies. In ideal conditions with perfectly smooth interfaces and surfaces, the DBR resonator quality factor primarily depends on the number of DBR pairs and can be arbitrarily increased by adding more pairs. Here, we present a comprehensive an… ▽ More Optical and acoustic resonators based on distributed Bragg reflectors (DBRs) hold significant potential across various domains, from lasers to quantum technologies. In ideal conditions with perfectly smooth interfaces and surfaces, the DBR resonator quality factor primarily depends on the number of DBR pairs and can be arbitrarily increased by adding more pairs. Here, we present a comprehensive analysis of the impact of top layer thickness variation and surface roughness on the performance of both Fabry-Perot and open-cavity resonators based on DBRs. Our findings illustrate that even a small, nanometer-scale surface roughness can appreciably reduce the quality factor of a given cavity. Moreover, it imposes a limitation on the maximum achievable quality factor, regardless of the number of DBR pairs. These effects hold direct relevance for practical applications, which we explore further through two case studies. In these instances, open nanoacoustic resonators serve as sensors for changes occurring in dielectric materials positioned on top of them. Our investigation underscores the importance of accounting for surface roughness in the design of both acoustic and optical DBR-based cavities, while also quantifying the critical significance of minimizing roughness during material growth and device fabrication processes. △ Less

Submitted 24 September, 2023; originally announced September 2023.

Whispering gallery quantum well exciton polaritons in an Indium Gallium Arsenide microdisk cavity

Authors: Romain de Oliveira, Martin Colombano, Florent Malabat, Martina Morassi, Aristide Lemaître, Ivan Favero

Abstract: Despite appealing high-symmetry properties that enable high quality factor and strong confinement, whispering gallery modes of spherical and circular resonators have been absent from the field of quantum-well exciton polaritons. Here we observe whispering gallery exciton polaritons in a Gallium Arsenide microdisk cavity filled with Indium Gallium Arsenide quantum wells, the testbed materials of po… ▽ More Despite appealing high-symmetry properties that enable high quality factor and strong confinement, whispering gallery modes of spherical and circular resonators have been absent from the field of quantum-well exciton polaritons. Here we observe whispering gallery exciton polaritons in a Gallium Arsenide microdisk cavity filled with Indium Gallium Arsenide quantum wells, the testbed materials of polaritonics. Strong coupling is evidenced in photoluminescence and resonant spectroscopy, accessed through concomitant confocal microscopy and near-field optical techniques. Excitonic and optical resonances are tuned by varying temperature and disk radius, revealing Rabi splittings between 5 and 10 meV. A dedicated analytical quantum model for such circular polaritons is developed, which reproduces the measured values. At high power, lasing is observed and accompanied by a blueshift of the emission that points to the regime of polariton lasing. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Phyllosilicates as earth-abundant layered materials for electronics and optoelectronics: Prospects and challenges in their ultrathin limit

Authors: Ingrid D. Barcelos, Raphaela de Oliveira, Gabriel R. Schleder, Matheus J. S. Matos, Raphael Longuinhos, Jenaina Ribeiro-Soares, Ana Paula M. Barboza, Mariana C. Prado, Elisângela S. Pinto, Yara Galvão Gobato, Hélio Chacham, Bernardo R. A. Neves, Alisson R. Cadore

Abstract: Phyllosilicate minerals are an emerging class of naturally occurring layered insulators with large bandgap energy that have gained attention from the scientific community. This class of lamellar materials has been recently explored at the ultrathin two-dimensional level due to their specific mechanical, electrical, magnetic, and optoelectronic properties, which are crucial for engineering novel de… ▽ More Phyllosilicate minerals are an emerging class of naturally occurring layered insulators with large bandgap energy that have gained attention from the scientific community. This class of lamellar materials has been recently explored at the ultrathin two-dimensional level due to their specific mechanical, electrical, magnetic, and optoelectronic properties, which are crucial for engineering novel devices (including heterostructures). Due to these properties, phyllosilicates minerals can be considered promising low-cost nanomaterials for future applications. In this Perspective article, we will present relevant features of these materials for their use in potential 2D-based electronic and optoelectronic applications, also discussing some of the major challenges in working with them. △ Less

Submitted 24 August, 2023; originally announced August 2023.

Comments: 29 pages, 4 figures

Journal ref: Journal of Applied Physics, 2023

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

The novel XYU-GEM to resolve ambiguities

Authors: K. J. Flöthner, F. Brunbauer, S. Ferry, F. Garcia, D. Janssens, B. Ketzer, M. Lisowska, H. Muller, R. de Oliveira, E. Oliveri, G. Orlandini, D. Pfeiffer, L. Ropelewski, J. Samarati, F. Sauli, L. Scharenberg, M. van Stenis, A. Utrobicic, R. Veenhof

Abstract: Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was pr… ▽ More Removing ambiguities within a single stage becomes crucial when one can not use multiple detectors behind each other to resolve them which naturally is the case for neutral radiation. An example would be RICH detectors. Commonly pixilated readout is choosen for this purpose. However, this causes a remarkable increase in quantity of channels and does not scale up well. Therefore, the XYU-GEM was proposed as a three coordinate strip-readout which is combined with a triple GEM detector. The readout complements a common XY readout with an additional projection which is tilted by 45°. The overdetermination due to three projections can be used to resovle ambiguities. Following the detector design will be explained, first measurements discussed to understand the response of the detector and a way to change the charge sharing without changing the manufacturing parameters of the readout. △ Less

Submitted 31 March, 2023; originally announced March 2023.

Production and characterization of random electrode sectorization in GEM foils

Authors: Antonello Pellecchia, Michele Bianco, Rui De Oliveira, Francesco Fallavollita, Davide Fiorina, Nicole Rosi, Piet Verwilligen

Abstract: In triple-GEM detectors, the segmentation of GEM foils in electrically independent sectors allows reducing the probability of discharge damage to the detector and improving the detector rate capability; however, a segmented foil presents thin dead regions in the separation between two sectors and the segmentation pattern has to be manually aligned with the GEM hole pattern during the foil manufact… ▽ More In triple-GEM detectors, the segmentation of GEM foils in electrically independent sectors allows reducing the probability of discharge damage to the detector and improving the detector rate capability; however, a segmented foil presents thin dead regions in the separation between two sectors and the segmentation pattern has to be manually aligned with the GEM hole pattern during the foil manufacturing, a procedure potentially sensitive to errors. We describe the production and characterization of triple-GEM detectors produced with an innovative GEM foil segmentation technique, the ``random hole segmentation'', that allows an easier manufacturing of segmented GEM foils. The electrical stability to high voltage and the gain uniformity of a random-hole segmented triple-GEM prototype are measured. The results of a test beam on a prototype assembled for the Phase-2 GEM upgrade of the CMS experiment are also presented; a high-statistics efficiency measurement shows that the random hole segmentation can limit the efficiency loss of the detector in the areas between two sectors, making it a viable alternative to blank segmentation for the GEM foil manufacturing of large-area detector systems. △ Less

Submitted 26 May, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Development of novel low-mass module concepts based on MALTA monolithic pixel sensors

Authors: J Weick, F Dachs, P Riedler, M Vicente Barreto Pinto, A M. Zoubir, L Flores Sanz de Acedo, I Asensi Tortajada, V Dao, D Dobrijevic, H Pernegger, M Van Rijnbach, A Sharma, C Solans Sanchez, R de Oliveira, D Dannheim, J V Schmidt

Abstract: The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire modu… ▽ More The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire module via one chip only. Novel technologies such as Anisotropic Conductive Films (ACF) and nanowires have been investigated to build a compact module. A lightweight flex with 17 μm trace spacing has been designed, allowing compact packaging with a direct attachment of the chip connection pads to the flex using these interconnection technologies. This contribution shows the current state of our work towards a flexible, low material, dense and reliable packaging and modularization of pixel detectors. △ Less

Submitted 10 March, 2023; originally announced March 2023.

Comments: 5 pages + 1 page references,8 figures

Characterization of Charge Spreading and Gain of Encapsulated Resistive Micromegas Detectors for the Upgrade of the T2K Near Detector Time Projection Chambers

Authors: D. Attie, O. Ballester, M. Batkiewicz-Kwasnia, P. Billoir, A. Blondel, S. Bolognesi, R. Boullon, D. Calvet, M. P. Casado, M. G. Catanesi, M. Cicerchia, G. Cogo, P. Colas, G. Collazuol, D. D Ago, C. Dalmazzon, T. Daret, A. Delbart, A. De Lorenzis, R. de Oliveira, S. Dolan, K. Dygnarowiczi, J. Dumarchez, S. Emery-Schren, A. Ershova , et al. (70 additional authors not shown)

Abstract: An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with 16 charge readout resistive Micromegas modules. A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and relia… ▽ More An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with 16 charge readout resistive Micromegas modules. A procedure to validate the performance of the detectors at different stages of production has been developed and implemented to ensure a proper and reliable operation of the detectors once installed. A dedicated X-ray test bench is used to characterize the detectors by scanning each pad individually and to precisely measure the uniformity of the gain and the deposited energy resolution over the pad plane. An energy resolution of about 10% is obtained. A detailed physical model has been developed to describe the charge dispersion phenomena in the resistive Micromegas anode. The detailed physical description includes initial ionization, electron drift, diffusion effects and the readout electronics effects. The model provides an excellent characterization of the charge spreading of the experimental measurements and allowed the simultaneous extraction of gain and RC information of the modules. △ Less

Submitted 8 March, 2023; originally announced March 2023.

Perspectives on high-frequency nanomechanics, nanoacoustics, and nanophononics

Authors: Priya, Edson R. Cardozo de Oliveira, Norberto D. Lanzillotti-Kimura

Abstract: Nanomechanics, nanoacoustics, and nanophononics refer to the engineering of acoustic phonons and elastic waves at the nanoscale and their interactions with other excitations such as magnons, electrons, and photons. This engineering enables the manipulation and control of solid-state properties that depend on the relative positions of atoms in a lattice. The access to advanced nanofabrication and n… ▽ More Nanomechanics, nanoacoustics, and nanophononics refer to the engineering of acoustic phonons and elastic waves at the nanoscale and their interactions with other excitations such as magnons, electrons, and photons. This engineering enables the manipulation and control of solid-state properties that depend on the relative positions of atoms in a lattice. The access to advanced nanofabrication and novel characterization techniques enabled a fast development of the fields over the last decade. The applications of nanophononics include thermal management, ultrafast data processing, simulation, sensing, and the development of quantum technologies. In this review, we cover some of the milestones and breakthroughs, and identify promising pathways of these emerging fields. △ Less

Submitted 18 January, 2023; originally announced January 2023.

Comments: 19 pages, 3 figures

Pixel detector hybridisation with Anisotropic Conductive Films

Authors: J. V. Schmidt, J. Braach, D. Dannheim, R. De Oliveira, P. Svihra, M. Vicente Barreto Pinto

Abstract: Hybrid pixel detectors require a reliable and cost-effective interconnect technology adapted to the pitch and die sizes of the respective applications. During the ASIC and sensor R&D phase, and in general for small-scale applications, such interconnect technologies need to be suitable for the assembly of single-dies, typically available from Multi-Project-Wafer submissions. Within the CERN EP R&D… ▽ More Hybrid pixel detectors require a reliable and cost-effective interconnect technology adapted to the pitch and die sizes of the respective applications. During the ASIC and sensor R&D phase, and in general for small-scale applications, such interconnect technologies need to be suitable for the assembly of single-dies, typically available from Multi-Project-Wafer submissions. Within the CERN EP R&D programme and the AIDAinnova collaboration, innovative hybridisation concepts targeting vertex-detector applications at future colliders are under development. This contribution presents recent results of a newly developed in-house single-die interconnection process based on Anisotropic Conductive Film (ACF). The ACF interconnect technology replaces the solder bumps with conductive particles embedded in an adhesive film. The electro-mechanical connection between the sensor and the read-out chip is achieved via thermo-compression of the ACF using a flip-chip device bonder. A specific pad topology is required to enable the connection via conductive particles and create cavities into which excess epoxy can flow. This pixel-pad topology is achieved with an in-house Electroless Nickel Immersion Gold (ENIG) plating process that is also under development within the project. The ENIG and ACF processes are qualified with the Timepix3 ASIC and sensors, with 55 um pixel pitch and 14 um pad diameter. The ACF technology can also be used for ASIC-PCB/FPC integration, replacing wire bonding or large-pitch solder bum** techniques. This contribution introduces the ENIG plating and ACF processes and presents recent results on Timepix3 hybrid assemblies. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Journal ref: JINST 18 C01040 (2023)

The MAPS foil

Authors: S. Beolé, F. Carnesecchi, G. Contin, R. de Oliveira, A. di Mauro, S. Ferry, H. Hillemanns, A. Junique, A. Kluge, L. Lautner, M. Mager, B. Mehl, K. Rebane, F. Reidt, I. Sanna, M. Šuljić, A. Yüncü

Abstract: We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these dev… ▽ More We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these devices can be scaled easily in size and volume, making it a compelling candidate for future large-scale applications. A first series of prototypes that embed the ALPIDE chip has been produced, functionally tested, and shown to be working. △ Less

Submitted 19 October, 2022; v1 submitted 25 May, 2022; originally announced May 2022.

On methods for radiometric surveying in radiotherapy bunkers

Authors: E. Sergio Santini, Renato Vasconcellos de Oliveira, Nozimar do Couto, Camila Salata, Paulo Antônio Pereira Leal, Flávia Cristina da Silva Teixeira, Georgia Santos Joana

Abstract: Radiometric surveys in radiotherapy bunkers have been carried out in Brazil for many years, both by the same radiotherapy facility for verification of shielding as by the regulatory agency for licensing and control purposes. In recent years, the Intensity Modulated Radiation Therapy (IMRT) technique has been gradually incorporated into many facilities. Therefore, it has been necessary to consider… ▽ More Radiometric surveys in radiotherapy bunkers have been carried out in Brazil for many years, both by the same radiotherapy facility for verification of shielding as by the regulatory agency for licensing and control purposes. In recent years, the Intensity Modulated Radiation Therapy (IMRT) technique has been gradually incorporated into many facilities. Therefore, it has been necessary to consider the increased leakage component that has an important impact on the secondary walls. For that, a radiometric survey method has been used that considers an increased "time of beam - on" for the secondary walls. In this work we discuss two methods of doing this: the first considers that this "time of beam - on" affects the sum of the two components, leakage and scattered. In another method it is considered that only the leakage component is affected by this extended "time of beam - on ". We compare the methods and show that for secondary walls with $U=1$ the first method overestimates dose rates by important percentages and for secondary walls with $U<1$ it can both overestimate or underestimate the dose rates, depending on the parameters of the project. An optimized procedure is proposed, according to the use factor ($U$) of the secondary wall to be measured. △ Less

Submitted 6 December, 2023; v1 submitted 28 December, 2021; originally announced December 2021.

Comments: 21 pages, 8 figures, 6 Tables. This is an extended version that complements the express version sent to Biomedical Physics & Engineering Express

Journal ref: Biomed. Phys. Eng. Express 10 (2024) 035001

Microchannel cooling for the LHCb VELO Upgrade I

Authors: Oscar Augusto De Aguiar Francisco, Wiktor Byczynski, Kazu Akiba, Claudia Bertella, Alexander Bitadze, Matthew Brock, Bartosz Bulat, Guillaume Button, Jan Buytaert, Stefano De Capua, Riccardo Callegari, Christine Castellana, Andrea Catinaccio, Catherine Charrier, Collette Charvet, Victor Coco, Paula Collins, Jordan Degrange, Raphael Dumps, Diego Alvarez Feito, Julian Freestone, Mariusz Jedrychowski, Vinicius Franco Lima, Abraham Gallas, Wouter Hulsbergen , et al. (35 additional authors not shown)

Abstract: The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures… ▽ More The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures was completed in September 2021. This paper describes the R\&D path supporting the microchannel production and assembly and the motivation for the design choices. The microchannel coolers have excellent thermal peformance, low and uniform mass, no thermal expansion mismatch with the ASICs and are radiation hard. The fluidic and thermal performance is presented. △ Less

Submitted 23 December, 2021; originally announced December 2021.

Comments: 31 pages, 27 figures

Report number: LHCb-PUB-2021-010

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Quantifying biomolecular diffusion with a "spherical cow" model

Authors: Frederico Campos Freitas, Sandra Byju, Asem Hassan, Ronaldo Junio de Oliveira, Paul C. Whitford

Abstract: The dynamics of biological polymers, including proteins, RNA, and DNA, occur in very high-dimensional spaces. Many naturally-occurring polymers can navigate a vast phase space and rapidly find their lowest free energy (folded) state. Thus, although the search process is stochastic, it is not completely random. Instead, it is best described in terms of diffusion along a downhill free energy landsca… ▽ More The dynamics of biological polymers, including proteins, RNA, and DNA, occur in very high-dimensional spaces. Many naturally-occurring polymers can navigate a vast phase space and rapidly find their lowest free energy (folded) state. Thus, although the search process is stochastic, it is not completely random. Instead, it is best described in terms of diffusion along a downhill free energy landscape. In this context, there have been many efforts to use simplified representations of the energetics, for which the potential energy is chosen to be a relatively smooth function with a global minima that corresponds to the folded state. That is, instead of including every type of physical interaction, the broad characteristics of the landscape are encoded in approximate energy functions. We describe a particular class of models, called structure-based models, that can be used to explore the diffusive properties of biomolecular folding and conformational rearrangements. These energy functions may be regarded as the "spherical cow" for modeling molecular biophysics. We discuss the physical principles underlying these models and provide an entry-level tutorial, which may be adapted for use in curricula for physics and non-physics majors. △ Less

Submitted 26 October, 2021; originally announced October 2021.

Comments: For associated repository, see https://github.com/smog-server/SMOG2_tutorial

MSC Class: 60G07 (primary); 35Q84; 60J70 ACM Class: G.3; I.6; J.2

Spin dependent analysis of homogeneous and inhomogeneous exciton decoherence in magnetic fields

Authors: V. Laurindo Jr., E. D. Guarin Castro, G. M. Jacobsen, E. R. C. de Oliveira, J. F. M. Domenegueti, B. Alén, Yu. I. Mazur, G. J. Salamo, G. E. Marques, E. Marega Jr., M. D. Teodoro, V. Lopez-Richard

Abstract: This paper discusses the combined effects of optical excitation power, interface roughness, lattice temperature, and applied magnetic fields on the spin-coherence of excitonic states in GaAs/AlGaAs multiple quantum wells. For low optical powers, at lattice temperatures between 4 K and 50 K, the scattering with acoustic phonons and short-range interactions appear as the main decoherence mechanisms.… ▽ More This paper discusses the combined effects of optical excitation power, interface roughness, lattice temperature, and applied magnetic fields on the spin-coherence of excitonic states in GaAs/AlGaAs multiple quantum wells. For low optical powers, at lattice temperatures between 4 K and 50 K, the scattering with acoustic phonons and short-range interactions appear as the main decoherence mechanisms. Statistical fluctuations of the band-gap however become also relevant in this regime and we were able to deconvolute them from the decoherence contributions. The circularly polarized magneto-photoluminescence unveils a non-monotonic tuning of the coherence for one of the spin components at low magnetic fields. This effect has been ascribed to the competition between short-range interactions and spin-flip scattering, modulated by the momentum relaxation time. △ Less

Submitted 4 January, 2022; v1 submitted 5 July, 2021; originally announced July 2021.

Development of very-thick transparent GEMs with wavelength-shifting capability for noble element TPCs

Authors: M. Kuźniak, D. González-Díaz, P. Amedo, C. D. R. Azevedo, D. J. Fernández-Posada, M. Kuźwa, S. Leardini, A. Leonhardt, T. Łęcki, L. Manzanillas, D. Muenstermann, G. Nieradka, R. de Oliveira, T. R. Pollmann, A. Saá Hernández, T. Sworobowicz, C. Türkoğlu, S. Williams

Abstract: A new concept for the simultaneous detection of primary and secondary scintillation in time projection chambers is proposed. Its core element is a type of very-thick GEM structure supplied with transparent electrodes and machined from a polyethylene naphthalate plate, a natural wavelength-shifter. Such a device has good prospects for scalability and, by virtue of its genuine optical properties, it… ▽ More A new concept for the simultaneous detection of primary and secondary scintillation in time projection chambers is proposed. Its core element is a type of very-thick GEM structure supplied with transparent electrodes and machined from a polyethylene naphthalate plate, a natural wavelength-shifter. Such a device has good prospects for scalability and, by virtue of its genuine optical properties, it can improve on the light collection efficiency, energy threshold and resolution of conventional micropattern gas detectors. This, together with the intrinsic radiopurity of its constituting elements, offers advantages for noble gas and liquid based time projection chambers, used for dark matter searches and neutrino experiments. Production, optical and electrical characterization, and first measurements performed with the new device are reported. △ Less

Submitted 15 March, 2022; v1 submitted 7 June, 2021; originally announced June 2021.

Comments: accepted for publication in Eur. Phys. J. C

Journal ref: Eur. Phys. J. C 81, 609 (2021)

New (TH)GEM coating materials characterised using spectroscopy methods

Authors: B. Ulukutlu, P. Gasik, T. Waldmann, L. Fabbietti, T. Klemenz, L. Lautner, R. de Oliveira, S. Williams

Abstract: In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The main focus of the study is the determination of the material dependence of the formation of electrical discharges in GEM-based detectors. For this task, discharge… ▽ More In this work GEM and single-hole Thick GEM structures, composed of different coating materials, are studied. The used foils incorporate conductive layers made of copper, aluminium, molybdenum, stainless steel, tungsten and tantalum. The main focus of the study is the determination of the material dependence of the formation of electrical discharges in GEM-based detectors. For this task, discharge probability measurements are conducted with several Thick GEM samples using a basic electronics readout chain. In addition to that, optical spectroscopy methods are employed to study the light emitted during discharges from the different foils. It is observed that the light spectra of GEMs include emission lines from the conductive layer material. This indicates the presence of the foil material in the discharge plasma after the initial spark. However, no lines associated with the coating material are observed while studying spark discharges induced in Thick GEMs. It is concluded that the conductive layer material does not play a substantial role in terms of stability against primary discharges. However, a strong material dependence is observed in the case of secondary discharge formation, pointing to molybdenum coating as the one providing increased stability. △ Less

Submitted 5 November, 2021; v1 submitted 25 April, 2021; originally announced April 2021.

Comments: 11 pages, 13 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1019 (2021) 165829

The upgrade of the ALICE TPC with GEMs and continuous readout

Authors: J. Adolfsson, M. Ahmed, S. Aiola, J. Alme, T. Alt, W. Amend, F. Anastasopoulos, C. Andrei, M. Angelsmark, V. Anguelov, A. Anjam, H. Appelshäuser, V. Aprodu, O. Arnold, M. Arslandok, D. Baitinger, M. Ball, G. G. Barnaföldi, E. Bartsch, P. Becht, R. Bellwied, A. Berdnikova, M. Berger, N. Bialas, P. Bialas , et al. (210 additional authors not shown)

Abstract: The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous re… ▽ More The upgrade of the ALICE TPC will allow the experiment to cope with the high interaction rates foreseen for the forthcoming Run 3 and Run 4 at the CERN LHC. In this article, we describe the design of new readout chambers and front-end electronics, which are driven by the goals of the experiment. Gas Electron Multiplier (GEM) detectors arranged in stacks containing four GEMs each, and continuous readout electronics based on the SAMPA chip, an ALICE development, are replacing the previous elements. The construction of these new elements, together with their associated quality control procedures, is explained in detail. Finally, the readout chamber and front-end electronics cards replacement, together with the commissioning of the detector prior to installation in the experimental cavern, are presented. After a nine-year period of R&D, construction, and assembly, the upgrade of the TPC was completed in 2020. △ Less

Submitted 25 March, 2021; v1 submitted 17 December, 2020; originally announced December 2020.

Comments: 88 pages, 60 figures

Journal ref: JINST 16 (2021) P03022

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is develo** a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Nonlinear system synchronization to sum signals of multiple chaotic systems

Authors: Robson Vieira, Weliton S. Martins, Sergio Barreiro, Rafael A. de Oliveira, Martine Chevrollier, Marcos Oriá

Abstract: Coupling of chaotic oscillators has evidenced conditions where synchronization is possible, therefore a nonlinear system can be driven to a particular state through input from a similar oscillator. Here we expand this concept of control of the state of a nonlinear system by showing that it is possible to induce it to follow a \textit{linear} superposition of signals from multiple equivalent system… ▽ More Coupling of chaotic oscillators has evidenced conditions where synchronization is possible, therefore a nonlinear system can be driven to a particular state through input from a similar oscillator. Here we expand this concept of control of the state of a nonlinear system by showing that it is possible to induce it to follow a \textit{linear} superposition of signals from multiple equivalent systems, using only partial information from them, through one- or more variable-signal. Moreover, we show that the larger the number of trajectories added to the input signal, the better the convergence of the system trajectory to the sum input. △ Less

Submitted 10 August, 2020; originally announced August 2020.

Determination of carrier density and dynamics via magneto-electroluminescence spectroscopy in resonant tunneling diodes

Authors: E. R. Cardozo de Oliveira, A. Naranjo, A. Pfenning, V. Lopez-Richard, G. E. Marques, L. Worschech, F. Hartmann, S. Höfling, M. D. Teodoro

Abstract: We study the magneto-transport and magneto-electroluminescence properties of purely n-doped GaAs/Al$_{0.6}$Ga$_{0.4}$As resonant tunneling diodes with an In$_{0.15}$Ga$_{0.85}$As quantum well and emitter prewell. Before the resonant current condition, magneto-transport measurements reveal charge carrier densities comparable for diodes with and without the emitter prewell. The Landau level splittin… ▽ More We study the magneto-transport and magneto-electroluminescence properties of purely n-doped GaAs/Al$_{0.6}$Ga$_{0.4}$As resonant tunneling diodes with an In$_{0.15}$Ga$_{0.85}$As quantum well and emitter prewell. Before the resonant current condition, magneto-transport measurements reveal charge carrier densities comparable for diodes with and without the emitter prewell. The Landau level splitting is observed in the electroluminescence emission from the emitter prewell, enabling the determination of the charge carrier build-up. Our findings show that magneto-electroluminescence spectroscopy techniques provide useful insights on the charge carrier dynamics in resonant tunneling diodes and is a versatile tool to complement magneto-transport techniques. This approach will drive the way for develo** potentially more efficient opto-electronic resonant tunneling devices, by e.g., monitoring voltage dependent charge accumulation for improving built-in fields and hence to maximize photodetector efficiency and/or minimize optical losses. △ Less

Submitted 29 December, 2020; v1 submitted 22 July, 2020; originally announced July 2020.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. Applied 15, 014042 (2021)

On the space resolution of the $μ$-RWELL

Authors: G. Bencivenni, G. Cibinetto, R. de Oliveira, R. Farinelli, G. Felici, M. Gatta, M. Giovannetti, L. Lavezzi, G. Morello, A. Ochi, M. Poli Lener, E. Tskhadadze

Abstract: In MPGD detectors evaluation of the space resolution with the charge centroid (CC) method provides large uncertainty when the im**ing particle is not perpendicular to the readout plane. An improvement of the position reconstruction, and thus of the space resolution, is represented by the $μ$TPC algorithm. In this work we report the application of this algorithm to the $μ$-Resistive WELL detector… ▽ More In MPGD detectors evaluation of the space resolution with the charge centroid (CC) method provides large uncertainty when the im**ing particle is not perpendicular to the readout plane. An improvement of the position reconstruction, and thus of the space resolution, is represented by the $μ$TPC algorithm. In this work we report the application of this algorithm to the $μ$-Resistive WELL detector. Moreover a combination of the CC method with the $μ$TPC algorithm is proposed, showing an almost uniform resolution over a wide angular range. △ Less

Submitted 7 July, 2020; originally announced July 2020.

A new version of the Aharonov-Bohm effect

Authors: Cesar R. de Oliveira, Renan G. Romano

Abstract: We propose a simple situation in which the magnetic Aharonov-Bohm potential influences the values of the deficiency indices of the initial Schrödinger operator, so determining whether the particle interacts with the solenoid or not. Even with the particle excluded from the magnetic field, the number of self-adjoint extensions of the initial Hamiltonian depends on the magnetic flux. This is a new p… ▽ More We propose a simple situation in which the magnetic Aharonov-Bohm potential influences the values of the deficiency indices of the initial Schrödinger operator, so determining whether the particle interacts with the solenoid or not. Even with the particle excluded from the magnetic field, the number of self-adjoint extensions of the initial Hamiltonian depends on the magnetic flux. This is a new point of view of the Aharonov-Bohm effect. △ Less

Submitted 11 February, 2020; originally announced February 2020.

MSC Class: 81Q12

Journal ref: Foundations of Physics (2020)

A new amplification structure for time projection chambers based on electroluminescence

Authors: D. González-Díaz, M. Fontaíña, D. García Castro, B. Mehl, R. de Oliveira, S. Williams, F. Monrabal, M. Querol, V. Álvarez

Abstract: A simple hole-type secondary scintillation structure (2 mm-hole, 5 mm-pitch, 5 mm-thickness) is introduced and its operation demonstrated in pure xenon in the pressure range 2-10 bar. The new device, characteristically translucent, has been manufactured through a collaboration between IGFAE and the CERN workshop, and relies entirely on radiopure materials (acrylic and copper), being extremely rugg… ▽ More A simple hole-type secondary scintillation structure (2 mm-hole, 5 mm-pitch, 5 mm-thickness) is introduced and its operation demonstrated in pure xenon in the pressure range 2-10 bar. The new device, characteristically translucent, has been manufactured through a collaboration between IGFAE and the CERN workshop, and relies entirely on radiopure materials (acrylic and copper), being extremely rugged in the presence of sparks, mechanically robust, and easily scalable, yet made through a relatively simple process. With an overall figure (at 10 bar) characterized by an energy resolution of 18.9%(FWHM) for $^{55}$Fe x-rays, an optical gain of m$_γ$ = 500 ph/e, and a stable operation at reduced fields more than twice those of some of the presently running experiments ($E_{EL}=3$ kV/cm/bar), this family of structures seems to show great promise for electroluminescence readouts on large scale detectors. As argued below, further improvements have the potential of bringing the energy resolution close to the Fano factor and increasing the optical gain. △ Less

Submitted 7 July, 2019; originally announced July 2019.

A study in using MICROMEGAS to improve particle identification with the TAMU-MDM focal plane detector

Authors: Alexandra Spiridon, Emmanuel Pollacco, Antti Saastamoinen, Robert E. Tribble, George Pascovici, Livius Trache, Bertrand Mehl, Rui de Oliveira

Abstract: A MICROMEGAS detection amplifier has been incorporated into the design of the TAMU MDM focal plane detector with the purpose of improving the energy resolution and thus, the particle identification. Beam tests showed a factor of 2 improvement over the original design, from 10-12% to 4-6%, for ions with A<40 at E/A around 10-20 MeV. A MICROMEGAS detection amplifier has been incorporated into the design of the TAMU MDM focal plane detector with the purpose of improving the energy resolution and thus, the particle identification. Beam tests showed a factor of 2 improvement over the original design, from 10-12% to 4-6%, for ions with A<40 at E/A around 10-20 MeV. △ Less

Submitted 4 July, 2019; originally announced July 2019.

Comments: 8 pages, 13 figures

The micro-RWELL layouts for high particle rate

Authors: G. Bencivenni, R. de Oliveira, G. Felici, M. Gatta, M. Giovannetti, G. Morello, A. Ochi, M. Poli Lener, E. Tskhadadze

Abstract: The $μ$-RWELL is a single-amplification stage resistive Micro-Pattern Gaseous Detector (MPGD). The detector amplification element is realized with a single copper-clad polyimide foil micro-patterned with a blind hole (well) matrix and embedded in the readout PCB through a thin Diamond-Like-Carbon (DLC) sputtered resistive film. The introduction of the resistive layer, suppressing the transition fr… ▽ More The $μ$-RWELL is a single-amplification stage resistive Micro-Pattern Gaseous Detector (MPGD). The detector amplification element is realized with a single copper-clad polyimide foil micro-patterned with a blind hole (well) matrix and embedded in the readout PCB through a thin Diamond-Like-Carbon (DLC) sputtered resistive film. The introduction of the resistive layer, suppressing the transition from streamer to spark, allows to achieve large gains ($\geq$10$^4$) with a single amplification stage, while partially reducing the capability to stand high particle fluxes. The simplest resistive layout, designed for low-rate applications, is based on a single-resistive layer with edge grounding. At high particle fluxes this layout suffers of a non-uniform response. In order to get rid of such a limitation different current evacuation geometries have been designed. In this work we report the study of the performance of several high rate resistive layouts tested at the CERN H8-SpS and PSI $π$M1 beam test facilities. These layouts fulfill the requirements for the detectors at the HL-LHC and for the experiments at the next generation colliders FCC-ee/hh and CepC. △ Less

Submitted 30 April, 2019; v1 submitted 26 March, 2019; originally announced March 2019.

Secondary discharge studies in single and multi GEM structures

Authors: A. Deisting, C. Garabatos, P. Gasik, D. Baitinger, A. Berdnikova, M. B. Blidaru, A. Datz, F. Dufter, S. Hassan, T. Klemenz, L. Lautner, S. Masciocchi, A. Mathis, R. A. Negrao De Oliveira, A. Szabo

Abstract: Secondary discharges, which consist of the breakdown of a gap near a GEM foil upon a primary discharge across that GEM, are studied in this work. Their main characteristics are the occurrence a few $10\,μ\textrm{s}$ after the primary, the relatively sharp onset at moderate electric fields across the gap, the absence of increased fields in the system, and their occurrence under both field directi… ▽ More Secondary discharges, which consist of the breakdown of a gap near a GEM foil upon a primary discharge across that GEM, are studied in this work. Their main characteristics are the occurrence a few $10\,μ\textrm{s}$ after the primary, the relatively sharp onset at moderate electric fields across the gap, the absence of increased fields in the system, and their occurrence under both field directions. They can be mitigated using series resistors in the high-voltage connection to the GEM electrode facing towards an anode. The electric field at which the onset of secondary discharges occurs indeed increases with increasing resistance. Discharge propagation form GEM to GEM in a multi-GEM system affects the occurrence probability of secondary discharges in the gaps between neighbouring GEMs. Furthermore, evidence of charges flowing through the gap after the primary discharge are reported. Such currents may or may not lead to a secondary discharge. A characteristic charge, of the order of $10^{10}\,\textrm{electrons}$, has been measured as the threshold for a primary discharge to be followed by a secondary discharge, and this number slightly depends on the gas composition. A mechanism involving the heating of the cathode surface as trigger for secondary discharges is proposed. △ Less

Submitted 21 January, 2019; v1 submitted 17 January, 2019; originally announced January 2019.

Comments: 16 pages, 19 figures, 1 table, Submitted to NIM A

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 937, 1 September 2019, Pages 168-180

T2K ND280 Upgrade -- Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, D. Attié, S. Ban, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, J. Boix, S. Bolognesi , et al. (359 additional authors not shown)

Abstract: In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve… ▽ More In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented. △ Less

Submitted 14 October, 2020; v1 submitted 11 January, 2019; originally announced January 2019.

Comments: 196 pages

Report number: CERN-SPSC-2019-001 (SPSC-TDR-006)

Particle identification studies with a full-size 4-GEM prototype for the ALICE TPC upgrade

Authors: M. M. Aggarwal, Z. Ahammed, S. Aiola, J. Alme, T. Alt, W. Amend, A. Andronic, V. Anguelov, H. Appelshäuser, M. Arslandok, R. Averbeck, M. Ball, G. G. Barnaföldi, E. Bartsch, R. Bellwied, G. Bencedi, M. Berger, N. Bialas, P. Bialas, L. Bianchi, S. Biswas, L. Boldizsár, L. Bratrud, P. Braun-Munzinger, M. Bregant , et al. (155 additional authors not shown)

Abstract: A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivit… ▽ More A large Time Projection Chamber is the main device for tracking and charged-particle identification in the ALICE experiment at the CERN LHC. After the second long shutdown in 2019/20, the LHC will deliver Pb beams colliding at an interaction rate of about 50 kHz, which is about a factor of 50 above the present readout rate of the TPC. This will result in a significant improvement on the sensitivity to rare probes that are considered key observables to characterize the QCD matter created in such collisions. In order to make full use of this luminosity, the currently used gated Multi-Wire Proportional Chambers will be replaced. The upgrade relies on continuously operated readout detectors employing Gas Electron Multiplier technology to retain the performance in terms of particle identification via the measurement of the specific energy loss by ionization d$E$/d$x$. A full-size readout chamber prototype was assembled in 2014 featuring a stack of four GEM foils as an amplification stage. The performance of the prototype was evaluated in a test beam campaign at the CERN PS. The d$E$/d$x$ resolution complies with both the performance of the currently operated MWPC-based readout chambers and the challenging requirements of the ALICE TPC upgrade program. Detailed simulations of the readout system are able to reproduce the data. △ Less

Submitted 17 June, 2018; v1 submitted 8 May, 2018; originally announced May 2018.

Comments: Submitted to NIM A

Journal ref: Nucl. Instrum. Meth. A903 (2018), 215-223

Production and Integration of the ATLAS Insertable B-Layer

Authors: B. Abbott, J. Albert, F. Alberti, M. Alex, G. Alimonti, S. Alkire, P. Allport, S. Altenheiner, L. Ancu, E. Anderssen, A. Andreani, A. Andreazza, B. Axen, J. Arguin, M. Backhaus, G. Balbi, J. Ballansat, M. Barbero, G. Barbier, A. Bassalat, R. Bates, P. Baudin, M. Battaglia, T. Beau, R. Beccherle , et al. (352 additional authors not shown)

Abstract: During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i… ▽ More During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector. △ Less

Submitted 6 June, 2018; v1 submitted 2 March, 2018; originally announced March 2018.

Comments: 90 pages in total. Author list: ATLAS IBL Collaboration, starting page 2. 69 figures, 20 tables. Published in Journal of Instrumentation. All figures available at: https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PLOTS/PIX-2018-001

Journal ref: Journal of Instrumentation JINST 13 T05008 (2018)

Force and torque of a string on a pulley

Authors: Thiago R. de Oliveira, Nivaldo A. Lemos

Abstract: Every university introductory physics course considers the problem of Atwood's machine taking into account the mass of the pulley. In the usual treatment the tensions at the two ends of the string are offhandedly taken to act on the pulley and be responsible for its rotation. However such a free-body diagram of the forces on the pulley is not {\it a priori} justified, inducing students to construc… ▽ More Every university introductory physics course considers the problem of Atwood's machine taking into account the mass of the pulley. In the usual treatment the tensions at the two ends of the string are offhandedly taken to act on the pulley and be responsible for its rotation. However such a free-body diagram of the forces on the pulley is not {\it a priori} justified, inducing students to construct wrong hypotheses such as that the string transfers its tension to the pulley or that some symmetry is in operation. We reexamine this problem by integrating the contact forces between each element of the string and the pulley and show that although the pulley does behave as if the tensions were acting on it, this comes only as the end result of a detailed analysis. We also address the question of how much friction is needed to prevent the string from slip** over the pulley. Finally, we deal with the case in which the string is on the verge of sliding and show that this will never happen unless certain conditions are met by the coefficient of friction and the masses involved. △ Less

Submitted 19 June, 2017; originally announced June 2017.

Comments: 9 pages, 3 figures, comments welcome!

Characterization of the second- and third-order nonlinear optical susceptibilities of monolayer MoS$_2$ using multiphoton microscopy

Authors: R. I. Woodward, R. T. Murray, C. F. Phelan, R. E. P. de Oliveira, T. H. Runcorn, E. J. R. Kelleher, S. Li, E. C. de Oliveira, G. J. M. Fechine, G. Eda, C. J. S. de Matos

Abstract: We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of… ▽ More We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of $|χ_s^{(2)}|=2.0\times10^{-20}$ m$^2$ V$^{-1}$ and for the first time for monolayer MoS$_\mathrm{2}$, $|χ_s^{(3)}|=1.7\times10^{-28}$ m$^3$ V$^{-2}$. These sheet susceptibilities correspond to effective bulk nonlinear susceptibility values of $|χ_{b}^{(2)}|=2.9\times10^{-11}$ m V$^{-1}$ and $|χ_{b}^{(3)}|=2.4\times10^{-19}$ m$^2$ V$^{-2}$, accounting for the sheet thickness. Experimental comparisons between MoS$_\mathrm{2}$ and graphene are also performed, demonstrating $\sim$3.4 times stronger third-order sheet nonlinearity in monolayer MoS$_\mathrm{2}$, highlighting the material's potential for nonlinear photonics in the telecommunications C band. △ Less

Submitted 15 November, 2016; v1 submitted 26 June, 2016; originally announced June 2016.

Comments: Accepted by 2D Materials, 28th Oct 2016

A novel application of Fiber Bragg Grating (FBG) sensors in MPGD

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active are… ▽ More We present a novel application of Fiber Bragg Grating (FBG) sensors in the construction and characterisation of Micro Pattern Gaseous Detector (MPGD), with particular attention to the realisation of the largest triple (Gas electron Multiplier) GEM chambers so far operated, the GE1/1 chambers of the CMS experiment at LHC. The GE1/1 CMS project consists of 144 GEM chambers of about 0.5 m2 active area each, employing three GEM foils per chamber, to be installed in the forward region of the CMS endcap during the long shutdown of LHC in 2108-2019. The large active area of each GE1/1 chamber consists of GEM foils that are mechanically stretched in order to secure their flatness and the consequent uniform performance of the GE1/1 chamber across its whole active surface. So far FBGs have been used in high energy physics mainly as high precision positioning and re-positioning sensors and as low cost, easy to mount, low space consuming temperature sensors. FBGs are also commonly used for very precise strain measurements in material studies. In this work we present a novel use of FBGs as flatness and mechanical tensioning sensors applied to the wide GEM foils of the GE1/1 chambers. A network of FBG sensors have been used to determine the optimal mechanical tension applied and to characterise the mechanical tension that should be applied to the foils. We discuss the results of the test done on a full-sized GE1/1 final prototype, the studies done to fully characterise the GEM material, how this information was used to define a standard assembly procedure and possible future developments. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: 4 pages, 4 figures, presented by Luigi Benussi at MPGD 2015 (Trieste, Italy). arXiv admin note: text overlap with arXiv:1512.08481

Report number: INFN-15-10/LNF

Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, O. Aboamer, D. Acosta, A. Ahmad, W. Ahmed, W. Ahmed, A. Aleksandrov, R. Aly, P. Altieri, C. Asawatangtrakuldee, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, V. Barashko, P. Barria, G. Bencze, N. Beni, L. Benussi , et al. (133 additional authors not shown)

Abstract: A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. A novel approach which uses Fibre Bragg Grating (FBG) sensors has been utilised to assess and monitor the flatness of Gaseous Electron Multipliers (GEM) foils. The setup layout and preliminary results are presented. △ Less

Submitted 28 December, 2015; originally announced December 2015.

Comments: Two pages, one figure. Presented by Luigi Benussi (corresponding author) to Elba 2015 conference

Report number: Frascati Preprint INFN-15-09/LNF

Charge Transfer Properties Through Graphene for Applications in Gaseous Detectors

Authors: S. Franchino, D. Gonzalez-Diaz, R. Hall-Wilton, R. B. Jackman, H. Muller, T. T. Nguyen, R. de Oliveira, E. Oliveri, D. Pfeiffer, F. Resnati, L. Ropelewski, J. Smith, M. van Stenis, C. Streli, P. Thuiner, R. Veenhof

Abstract: Graphene is a single layer of carbon atoms arranged in a honeycomb lattice with remarkable mechanical and electrical properties. Regarded as the thinnest and narrowest conductive mesh, it has drastically different transmission behaviours when bombarded with electrons and ions in vacuum. This property, if confirmed in gas, may be a definitive solution for the ion back-flow problem in gaseous detect… ▽ More Graphene is a single layer of carbon atoms arranged in a honeycomb lattice with remarkable mechanical and electrical properties. Regarded as the thinnest and narrowest conductive mesh, it has drastically different transmission behaviours when bombarded with electrons and ions in vacuum. This property, if confirmed in gas, may be a definitive solution for the ion back-flow problem in gaseous detectors. In order to ascertain this aspect, graphene layers of dimensions of about 2x2cm$^2$, grown on a copper substrate, are transferred onto a flat metal surface with holes, so that the graphene layer is freely suspended. The graphene and the support are installed into a gaseous detector equipped with a triple Gaseous Electron Multiplier (GEM), and the transparency properties to electrons and ions are studied in gas as a function of the electric fields. The techniques to produce the graphene samples are described, and we report on preliminary tests of graphene-coated GEMs. △ Less

Submitted 16 December, 2015; originally announced December 2015.

Comments: 4pages, 3figures, 13th Pisa Meeting on Advanced Detectors

Construction of two large-size four-plane micromegas detectors

Authors: Michele Bianco, Hans Danielsson, Jordan Degrange, Rui De Oliveira, Andreas Düdder, Edoardo Farina, Fabian Kuger, Paolo Iengo, Francisco Perez Gomez, Tai-Hua Lin, Matthias Schott, Givi Sekhniaidze, Federico Sforza, Ourania Sidiropoulou, Chrysostomos Valderanis, Maurice Vergain, Jörg Wotschack

Abstract: We report on the construction and initial performance studies of two micromegas detector quadruplets with an area of 0.5 m$^2$. They serve as prototypes for the planned upgrade project of the ATLAS muon system. Their design is based on the resistive-strip technology and thus renders the detectors spark tolerant. Each quadruplet comprises four detection layers with 1024 readout strips and a strip p… ▽ More We report on the construction and initial performance studies of two micromegas detector quadruplets with an area of 0.5 m$^2$. They serve as prototypes for the planned upgrade project of the ATLAS muon system. Their design is based on the resistive-strip technology and thus renders the detectors spark tolerant. Each quadruplet comprises four detection layers with 1024 readout strips and a strip pitch of 415 $μ$m. In two out of the four layers the strips are inclined by $\pm$1.5$^{\circ}$ to allow for the measurement of a second coordinate. We present the detector concept and report on the experience gained during the detector construction. In addition an evaluation of the detector performance with cosmic rays and test-beam data is given. △ Less

Submitted 12 November, 2015; originally announced November 2015.

Comments: 26 pages, 25 figures

Graphene Based Waveguide Polarizers: In-Depth Physical Analysis and Relevant Parameters

Authors: Rafael E. P. de Oliveira, Christiano J. S. de Matos

Abstract: Optical polarizing devices exploiting graphene embedded in waveguides have been demonstrated in the literature recently and both the TE- and TM-pass behaviors were reported. The determination of the passing polarization is usually attributed to graphene's Fermi level (and, therefore, do** level), with, however, no direct confirmation of this assumption provided. Here we show, through numerical s… ▽ More Optical polarizing devices exploiting graphene embedded in waveguides have been demonstrated in the literature recently and both the TE- and TM-pass behaviors were reported. The determination of the passing polarization is usually attributed to graphene's Fermi level (and, therefore, do** level), with, however, no direct confirmation of this assumption provided. Here we show, through numerical simulation, that rather than graphene's Fermi level, the passing polarization is determined by waveguide parameters, such as the superstrate refractive index and the waveguide's height. The results provide a consistent explanation for experimental results reported in the literature. In addition, we show that with an accurate graphene modeling, a waveguide cannot be switched between TE pass and TM pass via Fermi level tuning. Therefore, the usually overlooked contribution of the waveguide design is shown to be essential for the development of optimized TE- or TM-pass polarizers, which we show to be due to the control it provides on the fraction of the electric field that is tangential to graphene. △ Less

Submitted 7 October, 2015; v1 submitted 27 May, 2015; originally announced May 2015.

A novel fast timing micropattern gaseous detector: FTM

Authors: Rui De Oliveira, Marcello Maggi, Archana Sharma

Abstract: In recent years important progress in micropattern gaseous detectors has been achieved in the use of resistive material to build compact spark-protected devices. The novel idea presented here consists of the polarisation of WELL structures using only resistive coating. This allows a new device to be built with an architecture based on a stack of several coupled layers where drift and WELL multipli… ▽ More In recent years important progress in micropattern gaseous detectors has been achieved in the use of resistive material to build compact spark-protected devices. The novel idea presented here consists of the polarisation of WELL structures using only resistive coating. This allows a new device to be built with an architecture based on a stack of several coupled layers where drift and WELL multiplication stages alternate in the structure. The signals from each multiplication stage can be read out from any external readout boards through the capacitive couplings. Each layer provides a signal with a gain of 10^4-10^5. The main advantage of this new device is the dramatic improvement of the timing provided by the competition of the ionisation processes in the different drift regions, which can be exploited for fast timing at the high luminosity accelerators (e.g. HL-LHC upgrade) as well as far applications like medical imaging. △ Less

Submitted 18 March, 2015; originally announced March 2015.

Report number: CERN-OPEN-2015-002 INFN-15-01/BA

Performance of a Large-Area GEM Detector Prototype for the Upgrade of the CMS Muon Endcap System

Authors: D. Abbaneo, M. Abbas, M. Abbrescia, A. A. Abdelalim, M. Abi Akl, W. Ahmed, W. Ahmed, P. Altieri, R. Aly, C. Asawatangtrakuldee, A. Ashfaq, P. Aspell, Y. Assran, I. Awan, S. Bally, Y. Ban, S. Banerjee, P. Barria, L. Benussi, V. Bhopatkar, S. Bianco, J. Bos, O. Bouhali, S. Braibant, S. Buontempo , et al. (113 additional authors not shown)

Abstract: Gas Electron Multiplier (GEM) technology is being considered for the forward muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first implementation is planned for the GE1/1 system in the $1.5 < \midη\mid < 2.2$ region of the muon endcap mainly to control muon level-1 trigger rates after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by 3,072 radial strips wi… ▽ More Gas Electron Multiplier (GEM) technology is being considered for the forward muon upgrade of the CMS experiment in Phase 2 of the CERN LHC. Its first implementation is planned for the GE1/1 system in the $1.5 < \midη\mid < 2.2$ region of the muon endcap mainly to control muon level-1 trigger rates after the second long LHC shutdown. A GE1/1 triple-GEM detector is read out by 3,072 radial strips with 455 $μ$rad pitch arranged in eight $η$-sectors. We assembled a full-size GE1/1 prototype of 1m length at Florida Tech and tested it in 20-120 GeV hadron beams at Fermilab using Ar/CO$_{2}$ 70:30 and the RD51 scalable readout system. Four small GEM detectors with 2-D readout and an average measured azimuthal resolution of 36 $μ$rad provided precise reference tracks. Construction of this largest GEM detector built to-date is described. Strip cluster parameters, detection efficiency, and spatial resolution are studied with position and high voltage scans. The plateau detection efficiency is [97.1 $\pm$ 0.2 (stat)]\%. The azimuthal resolution is found to be [123.5 $\pm$ 1.6 (stat)] $μ$rad when operating in the center of the efficiency plateau and using full pulse height information. The resolution can be slightly improved by $\sim$ 10 $μ$rad when correcting for the bias due to discrete readout strips. The CMS upgrade design calls for readout electronics with binary hit output. When strip clusters are formed correspondingly without charge-weighting and with fixed hit thresholds, a position resolution of [136.8 $\pm$ 2.5 stat] $μ$rad is measured, consistent with the expected resolution of strip-pitch/$\sqrt{12}$ = 131.3 $μ$rad. Other $η$-sectors of the detector show similar response and performance. △ Less

Submitted 8 December, 2014; v1 submitted 30 November, 2014; originally announced December 2014.

Comments: 8 pages, 32 figures, submitted to Proc. 2014 IEEE Nucl. Sci. Symposium, Seattle, WA, reference added

The Resistive-WELL detector: a compact spark-protected single amplification-stage MPGD

Authors: G. Bencivenni, R. De Oliveira, G. Morello, M. Poli Lener

Abstract: In this work we present a novel idea for a compact spark-protected single amplification stage Micro-Pattern Gas Detector (MPGD). The detector amplification stage, realized with a structure very similar to a GEM foil, is embedded through a resistive layer in the readout board. A cathode electrode, defining the gas conversion/drift gap, completes the detector mechanics. The new structure, that we ca… ▽ More In this work we present a novel idea for a compact spark-protected single amplification stage Micro-Pattern Gas Detector (MPGD). The detector amplification stage, realized with a structure very similar to a GEM foil, is embedded through a resistive layer in the readout board. A cathode electrode, defining the gas conversion/drift gap, completes the detector mechanics. The new structure, that we call Resistive-WELL (R-WELL), has some characteristics in common with previous MPGDs, such as C.A.T. and WELL, developed more than ten years ago. The prototype object of the present study has been realized in the 2009 by TE-MPE-EM Workshop at CERN. The new architecture is a very compact MPGD, robust against discharges and exhibiting a large gain ($\sim$6$\times$10$^3$), simple to construct and easy for engineering and then suitable for large area tracking devices as well as huge calorimetric apparata. △ Less

Submitted 10 November, 2014; originally announced November 2014.