-
Remote Electric Powering by Germanium Photovoltaic Conversion of an Erbium-Fiber Laser Beam
Authors:
Richard Soref,
Francesco De Leonardis,
Oussama Moutanabbir,
Gerard Daligou
Abstract:
The commercially available 4000-Watt continuous-wave Erbium-doped-fiber laser, emitting at the 1567-nanometer wavelength where the atmosphere has high transmission, provides an opportunity for harvesting electric power at remote off the grid locations using a multi-module photovoltaic receiver panel. This paper proposes a 32-element monocrystalline thick-layer Germanium photovoltaic panel for effi…
▽ More
The commercially available 4000-Watt continuous-wave Erbium-doped-fiber laser, emitting at the 1567-nanometer wavelength where the atmosphere has high transmission, provides an opportunity for harvesting electric power at remote off the grid locations using a multi-module photovoltaic receiver panel. This paper proposes a 32-element monocrystalline thick-layer Germanium photovoltaic panel for efficient harvesting of a collimated 1.13-meter-diameter beam.The 0.78-meter squared PV panel is constructed from commercial Ge wafers. For incident continuous-wave laser-beam power in the 4000 to 10000 Watt range, our thermal and electrical and infrared simulations predict 660 to 1510 Watts of electrical output at panel temperatures of 350 to 423 Kelvin.
△ Less
Submitted 2 July, 2024; v1 submitted 7 June, 2024;
originally announced July 2024.
-
Directed High-Energy Infrared Laser Beams for Photovoltaic Generation of Electric Power at Remote Locations
Authors:
Richard Soref,
Francesco De Leonardis,
Gerard Daligou,
Oussama Moutanabbir
Abstract:
Transferring energy without transferring mass is a powerful paradigm to address the challenges faced when the access to, or the deployment of, the infrastructure for energy conversion is locally impossible or impractical. Laser beaming holds the promise of effectively implementing this paradigm. With this perspective, this work evaluates the optical-to-electrical power conversion that is created w…
▽ More
Transferring energy without transferring mass is a powerful paradigm to address the challenges faced when the access to, or the deployment of, the infrastructure for energy conversion is locally impossible or impractical. Laser beaming holds the promise of effectively implementing this paradigm. With this perspective, this work evaluates the optical-to-electrical power conversion that is created when a collimated laser beam illuminates a silicon photovoltaic solar cell that is located kilometers away from the laser. The laser is a CW high-energy Yb-doped fiber laser emitting at a center wavelength of 1075 nm with ~1 m2 of effective beam area. For 20 kW illumination of a solar panel having 0.6 m2 of area, optical simulations and thermal simulations indicate electrical output power of 3000 Watts at a panel temperature of 550 K. Our investigations show that thermo-radiative cells are rather inefficient. In contrast, an optimized approach to harvest laser energy is achieved by using a hybrid module consisting of a photovoltaic cell and a thermo-electric generator. Finally, practical considerations related to infrared power beaming are discussed and its potential applications are outlined.
△ Less
Submitted 8 March, 2024;
originally announced May 2024.
-
Compact Non-Volatile Multilevel Sb$_2$Se$_3$ Electro-Optical Switching in the Mid-Infrared Group-IV-Photonics Platform
Authors:
Richard Soref,
Francesco De Leonardis,
Martino De Carlo,
Vittorio M. N. Passaro
Abstract:
This theoretical modeling and simulation paper presents designs and projected performances of two non-volatile, broadband, on-chip 2-by-2 electro-optical switches based upon the germanium-on-insulator (GeOI) photonic-electronic platform operating at the 2.5 $μ$m mid-infrared wavelength. These compact devices facilitate large-scale integration on a monolithic wafer where all components are made of…
▽ More
This theoretical modeling and simulation paper presents designs and projected performances of two non-volatile, broadband, on-chip 2-by-2 electro-optical switches based upon the germanium-on-insulator (GeOI) photonic-electronic platform operating at the 2.5 $μ$m mid-infrared wavelength. These compact devices facilitate large-scale integration on a monolithic wafer where all components are made of group-IV semiconductors. The switches are the two-waveguide directional coupler (DC) and the Mach-Zehnder interferometer (MZI). A thin-film graphene Joule-effect micro-heater is assumed on the planarized GeOI device to change the phase (reversably) of DC-slot-embedded Sb$_2$Se$_3$ phase-change material (PCM) from crystalline to amorphous. The MZI has this PCM within its slotted-arm waveguides. Simulations show high-performance bistable or multi-stable cross-bar switching in both devices. The 2-by-2 DC has an active coupling length of 17 $μ$m, 130 nm gap, and a footprint of 5 $μ$m -by- 31 $μ$m. The device bandwidth is 30 nm over a wavelength range where cross and bar insertion losses IL are less than 0.3 dB, and where optical crosstalk is less than -15 dB. Results for the 2-by-2 MZI show crossbar switching attained with a 7.8 $μ$m-length Sb$_2$Se$_3$ slot and a 5 $μ$m -by- 51 $μ$m switch footprint. Stable, multi-level switching in both devices is attained via partial amorphization. Thermal modeling shows that careful control of the voltage-pulse amplitude V applied to graphene (rectangular pulse duration of 500 ns) can give 32 levels, for example, using V in the range from 6.18 to 7.75 Volts.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
High-performance Pockels-effect modulation and switching in silicon-based GaP/Si, AlP/Si, ZnS/Si, AlN/3C-SiC, GaAs/Ge, ZnSe/GaAs, and ZnSe/Ge superlattice-on-insulator integrated circuits
Authors:
Francesco De Leonardis,
Richard Soref
Abstract:
We propose new Si-based waveguided Superlattice on Insulator (SLOI) platforms for high-performance electro-optical (EO) 2 x 2 and N x M switching and 1 x 1 modulation; including broad spectrum and resonant. We present a theoretical investigation, based on the tight-binding Hamiltonian, of the Pockels EO effect in the lattice-matched undoped GaP/Si, AlP/Si, ZnS/Si, AlN/3C-SiC, GaAs/Ge, ZnSe/GaAs, a…
▽ More
We propose new Si-based waveguided Superlattice on Insulator (SLOI) platforms for high-performance electro-optical (EO) 2 x 2 and N x M switching and 1 x 1 modulation; including broad spectrum and resonant. We present a theoretical investigation, based on the tight-binding Hamiltonian, of the Pockels EO effect in the lattice-matched undoped GaP/Si, AlP/Si, ZnS/Si, AlN/3C-SiC, GaAs/Ge, ZnSe/GaAs, and ZnSe/Ge wafer-scale short-period superlattices that are etched into waveguided networks of small-footprint Mach-Zehnder interferometers and micro-ring resonators to yield opto-electronic chips.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
Diamond Detectors for the TOTEM Timing Upgrade
Authors:
TOTEM Collaboration,
G. Antchev,
P. Aspell,
I. Atanassov,
V. Avati,
J. Baechler,
V. Berardi,
M. Berretti,
E. Bossini,
U. Bottigli,
M. Bozzo,
P. Broulím,
A. Buzzo,
F. S. Cafagna,
M. G. Catanesi,
M. Csanád,
T. Csörgő,
M. Deile,
F. De Leonardis,
A. D'Orazio,
M. Doubek,
K. Eggert,
V. Eremin,
F. Ferro,
A. Fiergolski
, et al. (58 additional authors not shown)
Abstract:
This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC. The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with o…
▽ More
This paper describes the design and the performance of the timing detector developed by the TOTEM Collaboration for the Roman Pots (RPs) to measure the Time-Of-Flight (TOF) of the protons produced in central diffractive interactions at the LHC. The measurement of the TOF of the protons allows the determination of the longitudinal position of the proton interaction vertex and its association with one of the vertices reconstructed by the CMS detectors. The TOF detector is based on single crystal Chemical Vapor Deposition (scCVD) diamond plates and is designed to measure the protons TOF with about 50 ps time precision. This upgrade to the TOTEM apparatus will be used in the LHC run 2 and will tag the central diffractive events up to an interaction pileup of about 1. A dedicated fast and low noise electronics for the signal amplification has been developed. The digitization of the diamond signal is performed by sampling the waveform. After introducing the physics studies that will most profit from the addition of these new detectors, we discuss in detail the optimization and the performance of the first TOF detector installed in the LHC in November 2015.
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
