Showing 1–50 of 629 results for author: De, P

A nonlinear room mode determines the operating conditions of a large-cavity synthetic jet actuator at low frequencies

Authors: L. F. Olivera-Reyes, E. S. Palacios de Paz, S. Sánchez, J. F. Hernández-Sánchez

Abstract: Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a… ▽ More Synthetic Jet (SJ) actuators are an intrinsically complex combination of electronics, electric and mechanical systems. When studied theoretically, these elements are often simplified to coupled damped harmonic oscillators (DHO) that induce a pressure field within the cavity and drive momentum exchange. Thus, the performance of an SJ actuator results from coupling these DHOs, naturally leading to a few resonant modes. There is good evidence in the specialized literature of two resonant modes develo** in SJ actuators: the membrane/piezoelectric mode and the Helmholtz resonance. In this work, we report on the effect of a third resonant mode that develops at very low frequencies due to a cavity much larger than the volume displaced by the actuator. We present evidence that the large-cavity dynamics determine the SJ performance in combination with the well-described formation criteria. We compare the intensity of this resonant mode with the first room modes using standard frequency analysis. Unlike typical room modes, the distribution of this resonant mode is very biased to lower frequencies. We also show that the resonant mode may be dimmed and focused by adding an obstacle in different cavity positions for the lower sound intensities. This mode overcomes the Helmholtz resonance, dominating the dynamics for higher sound intensities. We show that jet and vortex velocities mimic the sound pressure curve for the low-frequency range. Its effect mitigates for the higher range due to a delve through smaller stroke lengths, characterized as a fixed relation between the Reynolds and the Stokes numbers. We consider that the large-cavity dynamics is an additional element that, if integrated as design criteria, could extend the optimum frequency response of SJs. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Comments: 21 pages, 10 figures, to be submitted

Bayesian inference of physics-based models of acoustically-forced laminar premixed conical flames

Authors: Alessandro Giannotta, Matthew Yoko, Stefania Cherubini, Pietro De Palma, Matthew P. Juniper

Abstract: We perform twenty experiments on an acoustically-forced laminar premixed Bunsen flame and assimilate high-speed footage of the natural emission into a physics-based model containing seven parameters. The experimental rig is a ducted Bunsen flame supplied by a mixture of methane and ethylene. A high-speed camera captures the natural emission of the flame, from which we extract the position of the f… ▽ More We perform twenty experiments on an acoustically-forced laminar premixed Bunsen flame and assimilate high-speed footage of the natural emission into a physics-based model containing seven parameters. The experimental rig is a ducted Bunsen flame supplied by a mixture of methane and ethylene. A high-speed camera captures the natural emission of the flame, from which we extract the position of the flame front. We use Bayesian inference to combine this experimental data with our prior knowledge of this flame's behaviour. This prior knowledge is expressed through (i) a model of the kinematics of a flame front moving through a model of the perturbed velocity field, and (ii) a priori estimates of the parameters of the above model with quantified uncertainties. We find the most probable a posteriori model parameters using Bayesian parameter inference, and quantify their uncertainties using Laplace's method combined with first-order adjoint methods. This is substantially cheaper than other common Bayesian inference frameworks, such as Markov Chain Monte Carlo. This process results in a quantitatively-accurate physics-based reduced-order model of the acoustically forced Bunsen flame for injection velocities ranging from 1.75 m/s to 2.99 m/s and equivalence ratio values ranging from 1.26 to 1.47, using seven parameters. We use this model to evaluate the heat release rate between experimental snapshots, to extrapolate to different experimental conditions, and to calculate the flame transfer function and its uncertainty for all the flames. Since the proposed model relies on only seven parameters, it can be trained with little data and successfully extrapolates beyond the training dataset. Matlab code is provided so that the reader can apply it to assimilate further flame images into the model. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter

Authors: M. Aamir, B. Acar, G. Adamov, T. Adams, C. Adloff, S. Afanasiev, C. Agrawal, C. Agrawal, A. Ahmad, H. A. Ahmed, S. Akbar, N. Akchurin, B. Akgul, B. Akgun, R. O. Akpinar, E. Aktas, A. AlKadhim, V. Alexakhin, J. Alimena, J. Alison, A. Alpana, W. Alshehri, P. Alvarez Dominguez, M. Alyari, C. Amendola , et al. (550 additional authors not shown)

Abstract: A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr… ▽ More A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated. △ Less

Submitted 30 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST

Intrinsic permeability of heterogeneous porous media

Authors: Wenqiao Jiao, David Scheidweiler, Nolwenn Delouche, Alberto Guadagnini, Pietro de Anna

Abstract: Providing a sound appraisal of the nature of the relationship between flow $(Q)$ and pressure drop $(ΔP)$ for porous media is a long-standing fundamental research challenge. A wide variety of environmental, societal and industrial issues, ranging, e.g., from water-soil system remediation to subsurface energy optimization, is affected by this critical issue. While such dependence is well represente… ▽ More Providing a sound appraisal of the nature of the relationship between flow $(Q)$ and pressure drop $(ΔP)$ for porous media is a long-standing fundamental research challenge. A wide variety of environmental, societal and industrial issues, ranging, e.g., from water-soil system remediation to subsurface energy optimization, is affected by this critical issue. While such dependence is well represented by the Kozeny-Carman formulation for homogeneous media, the fundamental nature of such a relationship ($Q$ vs $ΔP$) within heterogeneous porous systems characterized by a broad range of pore sizes is still not fully understood. We design a set of controlled and complex porous structures and quantify their intrinsic permeability through detailed high quality microfluidics experiments. We synthesize the results upon deriving an original analytical formulation relating the overall intrinsic permeability of the porous structure and their key features. Our formulation explicitly embeds the spatial variability of pore sizes into the medium permeability through a conceptualization of the system as a collection of smaller scale porous media arranged in series. The resulting analytical formulation yields permeability values matching their experimentally-based counterparts without the need of additional tunable parameters. Our study then documents and supports the strong role played by the micro-structure on the overall medium permeability. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 12 pages, 6 figures

The LiteBIRD mission to explore cosmic inflation

Authors: T. Ghigna, A. Adler, K. Aizawa, H. Akamatsu, R. Akizawa, E. Allys, A. Anand, J. Aumont, J. Austermann, S. Azzoni, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, S. Basak, A. Basyrov, S. Beckman, M. Bersanelli, M. Bortolami, F. Bouchet, T. Brinckmann, P. Campeti, E. Carinos, A. Carones , et al. (134 additional authors not shown)

Abstract: LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive map** of the CMB polarization across the entire sky. During its 3-… ▽ More LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive map** of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

Development of large-volume $^{130}$TeO$_2$ bolometers for the CROSS $2β$ decay search experiment

Authors: F. T. Avignone III, A. S. Barabash, V. Berest, L. Bergé, J. M. Calvo-Mozota, P. Carniti, M. Chapellier, I. Dafinei, F. A. Danevich, L. Dumoulin, F. Ferella, F. Ferri, A. Gallas, A. Giuliani, C. Gotti, P. Gras, A. Ianni, L. Imbert, H. Khalife, V. V. Kobychev, S. I. Konovalov, P. Loaiza, P. de Marcillac, S. Marnieros, C. A. Marrache-Kikuchi , et al. (14 additional authors not shown)

Abstract: We report on the development of thermal detectors based on large-size tellurium dioxide crystals (45x45x45 mm), containing tellurium enriched in $^{130}$Te to ~91%, for the CROSS double-beta decay experiment. A powder used for the crystals growth was additionally purified by the directional solidification method, resulting in the reduction of the concentration of impurities by a factor 10, to a fe… ▽ More We report on the development of thermal detectors based on large-size tellurium dioxide crystals (45x45x45 mm), containing tellurium enriched in $^{130}$Te to ~91%, for the CROSS double-beta decay experiment. A powder used for the crystals growth was additionally purified by the directional solidification method, resulting in the reduction of the concentration of impurities by a factor 10, to a few ppm of the total concentration of residual elements (the main impurity is Fe). The purest part of the ingot (the first ~200 mm, ~80% of the total length of the cylindrical part of the ingot) was determined by scanning segregation profiles of impurities (both on the surface and in center of the ingot) and used for the $^{130}$TeO$_2$ powder production with no evidence of re-contamination. The crystal growth was verified with precursors produced from powder with natural Te isotopic composition, and two small-size (20x20x10 mm) samples were tested at a sea-level laboratory showing high bolometric and spectrometric performance together with acceptable $^{210}$Po content (below 10 mBq/kg). This growth method was then applied for the production of six large cubic $^{130}$TeO$_2$ crystals for the CROSS experiment and 4 of them were taken randomly to be characterized at the Canfranc underground laboratory, in the CROSS-dedicated low-background cryogenic facility. Two $^{130}$TeO$_2$ samples were coated with a thin metal film in form of Al layer (on 4 sides) or AlPd grid (on a single side) to investigate the possibility to tag surface events by pulse-shape discrimination. Similarly to the small natural precursors, large-volume $^{130}$TeO$_2$ bolometers show high performance and even better internal purity ($^{210}$Po activity ~ 1 mBq/kg, while activities of $^{228}$Th and $^{226}$Ra are below 0.01 mBq/kg), satisfying requirements for the CROSS and, potentially, next-generation experiments. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: Prepared for submission to JINST; 22 pages, 11 figures, 4 tables

A novel mechanical design of a bolometric array for the CROSS double-beta decay experiment

Authors: D. Auguste, A. S. Barabash, V. Berest, L. Bergé, J. M. Calvo-Mozota, P. Carniti, M. Chapellier, I. Dafinei, F. A. Danevich, T. Dixon, L. Dumoulin, F. Ferri, A. Gallas, A. Giuliani, C. Gotti, P. Gras, A. Ianni, L. Imbert, H. Khalife, V. V. Kobychev, S. I. Konovalov, P. Loaiza, P. de Marcillac, S. Marnieros, C. A. Marrache-Kikuchi , et al. (13 additional authors not shown)

Abstract: The CROSS experiment will search for neutrinoless double-beta decay using a specific mechanical structure to hold thermal detectors. The design of the structure was tuned to minimize the background contribution, kee** an optimal detector performance. A single module of the structure holds two scintillating bolometers (with a crystal size of 45x45x45 mm and a Ge slab facing the crystal's upper si… ▽ More The CROSS experiment will search for neutrinoless double-beta decay using a specific mechanical structure to hold thermal detectors. The design of the structure was tuned to minimize the background contribution, kee** an optimal detector performance. A single module of the structure holds two scintillating bolometers (with a crystal size of 45x45x45 mm and a Ge slab facing the crystal's upper side) in the Cu frame, allowing for a modular construction of a large-scale array. Two designs are released: the initial Thick version contains around 15% of Cu over the crystal mass (lithium molybdate, LMO), while this ratio is reduced to ~6% in a finer (Slim) design. Both designs were tested extensively at aboveground (IJCLab, France) and underground (LSC, Spain) laboratories. In particular, at LSC we used a pulse-tube-based CROSS facility to operate a 6-crystal array of LMOs enriched/depleted in $^{100}$Mo. The tested LMOs show high spectrometric performance in both designs; notably, the measured energy resolution is 5--7 keV FWHM at 2615 keV $γ$s, nearby the Q-value of $^{100}$Mo (3034 keV). Due to the absence of a reflective cavity around LMOs, a low scintillation signal is detected by Ge bolometers: ~0.3 keV (~150 photons) for 1-MeV $γ$($β$) LMO-event. Despite that, an acceptable separation between $α$ and $γ$($β$) events is achieved with most devices. The highest efficiency is reached with light detectors in the Thick design thanks to a lower baseline noise width (0.05--0.09 keV RMS) when compared to that obtained in the Slim version (0.10--0.35 keV RMS). Given the pivotal role of bolometric photodetectors for particle identification and random coincidences rejection, we will use the structure here described with upgraded light detectors, featuring thermal signal amplification via the Neganov-Trofimov-Luke effect, as also demonstrated in the present work. △ Less

Submitted 29 May, 2024; originally announced May 2024.

Comments: Prepared for submission to JINST; 29 pages, 16 figures, 5 tables

Lorentz-Equivariant Geometric Algebra Transformers for High-Energy Physics

Authors: Jonas Spinner, Victor Bresó, Pim de Haan, Tilman Plehn, Jesse Thaler, Johann Brehmer

Abstract: Extracting scientific understanding from particle-physics experiments requires solving diverse learning problems with high precision and good data efficiency. We propose the Lorentz Geometric Algebra Transformer (L-GATr), a new multi-purpose architecture for high-energy physics. L-GATr represents high-energy data in a geometric algebra over four-dimensional space-time and is equivariant under Lore… ▽ More Extracting scientific understanding from particle-physics experiments requires solving diverse learning problems with high precision and good data efficiency. We propose the Lorentz Geometric Algebra Transformer (L-GATr), a new multi-purpose architecture for high-energy physics. L-GATr represents high-energy data in a geometric algebra over four-dimensional space-time and is equivariant under Lorentz transformations, the symmetry group of relativistic kinematics. At the same time, the architecture is a Transformer, which makes it versatile and scalable to large systems. L-GATr is first demonstrated on regression and classification tasks from particle physics. We then construct the first Lorentz-equivariant generative model: a continuous normalizing flow based on an L-GATr network, trained with Riemannian flow matching. Across our experiments, L-GATr is on par with or outperforms strong domain-specific baselines. △ Less

Submitted 9 July, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

Comments: 10+12 pages, 5+2 figures, 2 tables, v2: Extend acknowledgements, add link to github repo

Report number: MIT-CTP/5723

Acoustic Positioning for Deep Sea Neutrino Telescopes with a System of Piezo Sensors Integrated into Glass Spheres

Authors: A. Albert, S. Alves, M. André, M. Ardid, S. Ardid, J. -J. Aubert, J. Aublin, B. Baret, S. Basa, Y. Becherini, B. Belhorma, M. Bendahman, F. Benfenati, V. Bertin, S. Biagi, J. Boumaaza, M. Bouta, M. C. Bouwhuis, H. Brânzaş, R. Bruijn, J. Brunner, J. Busto, B. Caiffi, D. Calvo, S. Campion , et al. (115 additional authors not shown)

Abstract: Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infras… ▽ More Position calibration in the deep sea is typically done by means of acoustic multilateration using three or more acoustic emitters installed at known positions. Rather than using hydrophones as receivers that are exposed to the ambient pressure, the sound signals can be coupled to piezo ceramics glued to the inside of existing containers for electronics or measuring instruments of a deep sea infrastructure. The ANTARES neutrino telescope operated from 2006 until 2022 in the Mediterranean Sea at a depth exceeding 2000m. It comprised nearly 900 glass spheres with 432mm diameter and 15mm thickness, equipped with photomultiplier tubes to detect Cherenkov light from tracks of charged elementary particles. In an experimental setup within ANTARES, piezo sensors have been glued to the inside of such - otherwise empty - glass spheres. These sensors recorded signals from acoustic emitters with frequencies from 46545 to 60235Hz. Two waves propagating through the glass sphere are found as a result of the excitation by the waves in the water. These can be qualitatively associated with symmetric and asymmetric Lamb-like waves of zeroth order: a fast (early) one with $v_e \approx 5$mm/$μ$s and a slow (late) one with $v_\ell \approx 2$mm/$μ$s. Taking these findings into account improves the accuracy of the position calibration. The results can be transferred to the KM3NeT neutrino telescope, currently under construction at multiple sites in the Mediterranean Sea, for which the concept of piezo sensors glued to the inside of glass spheres has been adapted for monitoring the positions of the photomultiplier tubes. △ Less

Submitted 12 May, 2024; originally announced May 2024.

Comments: submitted to "Experimental Astronomy"

Unsupervised identification of local atomic environment from atomistic potential descriptors

Authors: Lukáš Kývala, Pablo Montero De Hijes, Christoph Dellago

Abstract: Analyzing local structures effectively is key to unraveling the origin of many physical phenomena. Unsupervised algorithms offer an effective way of handling systems in which order parameters are unknown or computationally expensive. By combining novel unsupervised algorithm (Pairwise Controlled Manifold Approximation Projection) with atomistic potential descriptors, we distinguish between various… ▽ More Analyzing local structures effectively is key to unraveling the origin of many physical phenomena. Unsupervised algorithms offer an effective way of handling systems in which order parameters are unknown or computationally expensive. By combining novel unsupervised algorithm (Pairwise Controlled Manifold Approximation Projection) with atomistic potential descriptors, we distinguish between various chemical environments with minimal computational overhead. In particular, we apply this method to silicon and water systems. The algorithm effectively distinguishes between solid structures and phases of silicon, including solid and liquid phases, and accurately identifies interstitial, monovacancy, and surface atoms in diamond structures. In the case of water, it is capable of identifying an ice nucleus in the liquid phase, demonstrating its applicability in nucleation studies. △ Less

Submitted 2 May, 2024; originally announced May 2024.

The impact of Ozone on Earth-like exoplanet climate dynamics: the case of Proxima Centauri b

Authors: Paolo De Luca, Marrick Braam, Thaddeus D. Komacek, Assaf Hochman

Abstract: The emergence of the James Webb Space Telescope and the development of other advanced observatories (e.g., ELTs, LIFE and HWO) marks a pivotal moment in the quest to characterize the atmospheres of Earth-like exoplanets. Motivated by these advancements, we conduct theoretical explorations of exoplanetary atmospheres, focusing on refining our understanding of planetary climate and habitability. Our… ▽ More The emergence of the James Webb Space Telescope and the development of other advanced observatories (e.g., ELTs, LIFE and HWO) marks a pivotal moment in the quest to characterize the atmospheres of Earth-like exoplanets. Motivated by these advancements, we conduct theoretical explorations of exoplanetary atmospheres, focusing on refining our understanding of planetary climate and habitability. Our study investigates the impact of ozone on the atmosphere of Proxima Centauri b in a synchronous orbit, utilizing coupled climate chemistry model simulations and dynamical systems theory. The latter quantifies compound dynamical metrics in phase space through the inverse of co-persistence ($θ$) and co-dimension (d), of which low values correspond to stable atmospheric states. Initially, we scrutinized the influence of ozone on temperature and wind speed. Including interactive ozone (i.e., coupled atmospheric (photo)chemistry) reduces the hemispheric difference in temperature from 68 K to 64 K, increases ($\sim+$7 K) atmospheric temperature at an altitude range of $\sim$20-50 km, and increases variability in the compound dynamics of temperature and wind speed. Moreover, with interactive ozone, wind speed during highly temporally stable states is weaker than for unstable ones, and ozone transport to the nightside gyres during unstable states is enhanced compared to stable ones ($\sim+$800 DU). We conclude that including interactive ozone significantly influences Earth-like exoplanets' chemistry and climate dynamics. This study establishes a novel pathway for comprehending the influence of photochemical species on the climate dynamics of potentially habitable Earth-like exoplanets. We envisage an extension of this framework to other exoplanets. △ Less

Submitted 27 April, 2024; originally announced April 2024.

Comments: 28 pages, 7 figures, re-submitted to MNRAS

Can Ephapticity Contributes to the Brain Complexity?

Authors: Gabriel Moreno Cunha, Gillberto Corso, Matheus Phellipe Brasil de Sousa, Gustavo Zampier dos Santos Lima

Abstract: The inquiry into the origin of brain complexity remains a pivotal question in neuroscience. While synaptic stimuli are acknowledged as significant, their efficacy often falls short in elucidating the extensive interconnections of the brain and nuanced levels of cognitive integration. Recent advances in neuroscience have brought the mechanisms underlying the generation of highly intricate dynamics,… ▽ More The inquiry into the origin of brain complexity remains a pivotal question in neuroscience. While synaptic stimuli are acknowledged as significant, their efficacy often falls short in elucidating the extensive interconnections of the brain and nuanced levels of cognitive integration. Recent advances in neuroscience have brought the mechanisms underlying the generation of highly intricate dynamics, emergent patterns, and sophisticated oscillatory signals into question. Within this context, our study, in alignment with current research, posits the hypothesis that ephaptic communication may emerge as the primary candidate for unraveling optimal brain complexity. In this investigation, we conducted a comparative analysis between two types of networks utilizing the Quadratic Integrate-and-Fire Ephaptic model (QIF-E): (I) a small-world synaptic network (ephaptic-off) and (II) a mixed composite network comprising a small-world synaptic network with the addition of an ephaptic network (ephaptic-on). Utilizing the Multiscale Entropy methodology, we conducted an in-depth analysis of the responses generated by both network configurations, with complexity assessed by integrating across all temporal scales. Our findings demonstrate that ephaptic coupling enhances complexity under specific topological conditions, considering variables such as time, spatial scales, and synaptic intensity. These results offer fresh insights into the dynamics of communication within the nervous system and underscore the fundamental role of ephapticity in regulating complex brain functions. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Simulation of depth-dose curves and water equivalent ratios of energetic proton beams in cortical bone

Authors: Ana María Zamora-Vinaroz, Pablo de Vera, Isabel Abril, Rafael Garcia-Molina

Abstract: We have determined the depth-dose curve, the penetration range, and the water equivalent ratio (WER), for proton beams of clinical energies in cortical bone, by means of a detailed and accurate simulation that combines molecular dynamics and Monte Carlo techniques. The fundamental input quantities (stop** power and energy loss straggling) for the simulation were obtained from a reliable electron… ▽ More We have determined the depth-dose curve, the penetration range, and the water equivalent ratio (WER), for proton beams of clinical energies in cortical bone, by means of a detailed and accurate simulation that combines molecular dynamics and Monte Carlo techniques. The fundamental input quantities (stop** power and energy loss straggling) for the simulation were obtained from a reliable electronic excitation spectrum of the condensed-phase target, which takes into account the organic and mineral phases that form it. Our simulations with these inputs, that are in excellent agreement with the scarce data available for a cortical bone target, deviate from simulations performed using other stop** quantities, such as those provided in the widely used ICRU Report 49. The results of this work emphasize the importance of an accurate determination of the stop** quantities of cortical bone in order to advance towards the millimetric precision for the proton penetration ranges and deposited dose needed in radiotherapy. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Comments: 20 pages, 6 figures

Combined Pre-Supernova Alert System with Kamland and Super-Kamiokande

Authors: KamLAND, Super-Kamiokande Collaborations, :, Seisho Abe, Minori Eizuka, Sawako Futagi, Azusa Gando, Yoshihito Gando, Shun Goto, Takahiko Hachiya, Kazumi Hata, Koichi Ichimura, Sei Ieki, Haruo Ikeda, Kunio Inoue, Koji Ishidoshiro, Yuto Kamei, Nanami Kawada, Yasuhiro Kishimoto, Masayuki Koga, Maho Kurasawa, Tadao Mitsui, Haruhiko Miyake, Daisuke Morita, Takeshi Nakahata , et al. (290 additional authors not shown)

Abstract: Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are ob… ▽ More Preceding a core-collapse supernova, various processes produce an increasing amount of neutrinos of all flavors characterized by mounting energies from the interior of massive stars. Among them, the electron antineutrinos are potentially detectable by terrestrial neutrino experiments such as KamLAND and Super-Kamiokande via inverse beta decay interactions. Once these pre-supernova neutrinos are observed, an early warning of the upcoming core-collapse supernova can be provided. In light of this, KamLAND and Super-Kamiokande, both located in the Kamioka mine in Japan, have been monitoring pre-supernova neutrinos since 2015 and 2021, respectively. Recently, we performed a joint study between KamLAND and Super-Kamiokande on pre-supernova neutrino detection. A pre-supernova alert system combining the KamLAND detector and the Super-Kamiokande detector was developed and put into operation, which can provide a supernova alert to the astrophysics community. Fully leveraging the complementary properties of these two detectors, the combined alert is expected to resolve a pre-supernova neutrino signal from a 15 M$_{\odot}$ star within 510 pc of the Earth, at a significance level corresponding to a false alarm rate of no more than 1 per century. For a Betelgeuse-like model with optimistic parameters, it can provide early warnings up to 12 hours in advance. △ Less

Submitted 1 July, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

Comments: Resubmitted to ApJ. 22 pages, 16 figures, for more information about the combined pre-supernova alert system, see https://www.lowbg.org/presnalarm/

Low-Loss Silicon Directional Coupler with Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides

Authors: Ahmed H. El-Saeed, Alaa Elshazly, Hakim Kobbi, Rafal Magdziak, Guy Lepage, Chiara Marchese, Javad Rahimi Vaskasi, Swetanshu Bipul, Dieter Bode, Marko Ersek Filipcic, Dimitrios Velenis, Maumita Chakrabarti, Peter De Heyn, Peter Verheyen, Philippe Absil, Filippo Ferraro, Yoo** Ban, Joris Van Campenhout, Wim Bogaerts, Qingzhong Deng

Abstract: We demonstrate a design for a high-performance $2 \times 2$ splitter meeting the essential requirements of broadband coupling, support for arbitrary coupling ratio, ultra low-loss, high fabrication tolerance, and a compact footprint. This is achieved based on a rigorous coupled mode theory analysis of the broadband response of the bent directional coupler (DC) and by demonstrating a full couplin… ▽ More We demonstrate a design for a high-performance $2 \times 2$ splitter meeting the essential requirements of broadband coupling, support for arbitrary coupling ratio, ultra low-loss, high fabrication tolerance, and a compact footprint. This is achieved based on a rigorous coupled mode theory analysis of the broadband response of the bent directional coupler (DC) and by demonstrating a full coupling model, with measured broadband values of 0.4, 0.5, 0.6, and 0.7. As a benchmark, we demonstrate a 0.5:0.5 splitter that significantly reduces coupling variation from 0.391 in the traditional DC to just 0.051 over an 80 nm wavelength span. This represents a remarkable 7.67 times reduction in coupling variation. Further, newly-invented low-loss bends were used in the proposed design leading to an ultra low-loss design with negligible excess loss ($\mathrm{0.003 \pm 0.013 \ dB}$). The proposed 0.5:0.5 silicon strip waveguide-based design is tolerant and shows consistently low coupling variation over a full 300 mm wafer showcasing a maximum cross coupling variation of 0.112 over 80 nm wavelength range, at the extreme edge of the wafer. Futhermore, we augmented the wafer map** with a waveguide width fabrication tolerance study, confirming the tolerance of the device with a mere 0.061 maximum coupling variation with a waveguide width deviation of $\pm 20$ nm over 80 nm wavelength range. These specs make the proposed splitter an attractive component for practical applications with mass production. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Estimating the detection of antineutrinos in the future Brazilian neutron source

Authors: Luiz Paulo de Oliveira

Abstract: In line with the tradition of employing nuclear reactors for neutrino physics research, we present potential experiments that could be undertaken using the new Brazilian neutron source, the Brazilian Multipurpose Reactor (RMB). This upcoming facility has clearly defined objectives, including the production of radioisotopes for the healthcare system, material irradiation testing, and research using… ▽ More In line with the tradition of employing nuclear reactors for neutrino physics research, we present potential experiments that could be undertaken using the new Brazilian neutron source, the Brazilian Multipurpose Reactor (RMB). This upcoming facility has clearly defined objectives, including the production of radioisotopes for the healthcare system, material irradiation testing, and research using neutron beams to investigate the micro and mesostructures of various materials. However, we anticipate that the RMB will generate up to $3,500$ antineutrinos daily, potentially expanding the facility's scope to include neutrino physics experiments involving beta and inverse beta reactions. The modern operational conditions of the RMB and its location in the Iperó-Brazil region may also enable neutrino oscillation experiments and the determination of the $θ_{13}$ parameter, as well as support safeguards activities by the International Atomic Energy Agency (IAEA), allowing for the monitoring of nuclear fuel burning cycles and isotope fractions. We discuss the potential utilization of the RMB as an antineutrino source, proposing experiments and addressing associated technical limitations. △ Less

Submitted 13 May, 2024; v1 submitted 26 March, 2024; originally announced March 2024.

Comments: 13 pages, 5 figures, some corrections, and references added

Triboelectrically mediated self-assembly and manipulation of drops at an interface

Authors: Paul R. Kaneelil, J. Pedro de Souza, Günther Turk, Amir A. Pahlavan, Howard A. Stone

Abstract: The fluid-fluid interface is a complex environment for a floating object where the statics and dynamics may be governed by capillarity, gravity, inertia, and other external body forces. Yet, the alignment of these forces in intricate ways might result in beautiful pattern formation and self-assembly of these objects, as in the case of bubble rafts or colloidal particles. While interfacial self-ass… ▽ More The fluid-fluid interface is a complex environment for a floating object where the statics and dynamics may be governed by capillarity, gravity, inertia, and other external body forces. Yet, the alignment of these forces in intricate ways might result in beautiful pattern formation and self-assembly of these objects, as in the case of bubble rafts or colloidal particles. While interfacial self-assembly has been explored widely, controlled manipulation of floating objects, e.g. drops, at the fluid-fluid interface still remains a challenge largely unexplored. In this work, we reveal the self-assembly and manipulation of water drops floating at an oil-air interface. We show that the assembly occurs due to electrostatic interactions between the drops and their environment. We highlight the role of the boundary surrounding the system by showing that even drops with a net zero electric charge can self-assemble under certain conditions. Using experiments and theory, we show that the depth of the oil bath plays an important role in setting the distance between the self-assembled drops. Furthermore, we demonstrate ways to manipulate the drops actively and passively at the interface. △ Less

Submitted 22 March, 2024; v1 submitted 20 March, 2024; originally announced March 2024.

A Segmented Total Energy Detector (sTED) optimized for $(n,γ)$ cross-section measurements at n_TOF EAR2

Authors: V. Alcayne, D. Cano-Ott, J. Garcia, E. Gonzalez-Romero, T. Martinez, A. Perez de Rada, J. Plaza, A. Sanchez-Caballero, J. Balibrea-Correa, C. Domingo-Pardo, J. Lerendegui-Marco, A. Casanovas, F. Calvino, O. Aberle, the n_TOF collaboration

Abstract: The neutron time-of-flight facility n_TOF at CERN is a spallation source dedicated to measurements of neutron-induced reaction cross-sections of interest in nuclear technologies, astrophysics, and other applications. Since 2014, Experimental ARea 2 (EAR2) is operational and delivers a neutron fluence of $4\times 10^7$ neutrons per nominal proton pulse, which is 50 times higher than the one of Expe… ▽ More The neutron time-of-flight facility n_TOF at CERN is a spallation source dedicated to measurements of neutron-induced reaction cross-sections of interest in nuclear technologies, astrophysics, and other applications. Since 2014, Experimental ARea 2 (EAR2) is operational and delivers a neutron fluence of $4\times 10^7$ neutrons per nominal proton pulse, which is 50 times higher than the one of Experimental ARea 1 (EAR1) of $8\times10^5$ neutrons per pulse. The high neutron flux at EAR2 results in high counting rates in the detectors that challenged the previously existing capture detection systems. For this reason, a Segmented Total Energy Detector (sTED) has been developed to overcome the limitations in the detectors response, by reducing the active volume per module and by using a photomultiplier (PMT) optimized for high counting rates. This paper presents the main characteristics of the sTED, including energy and time resolution, response to $γ$-rays, and provides as well details of the use of the Pulse Height Weighting Technique (PHWT) with this detector. The sTED has been validated to perform neutron-capture cross-section measurements in EAR2 in the neutron energy range from thermal up to at least 400 keV. The detector has already been successfully used in several measurements at n_TOF EAR2. △ Less

Submitted 14 March, 2024; originally announced March 2024.

Radiative lifetime of the A 2Π1/2 state in RaF with relevance to laser cooling

Authors: M. Athanasakis-Kaklamanakis, S. G. Wilkins, P. Lassègues, L. Lalanne, J. R. Reilly, O. Ahmad, M. Au, S. W. Bai, J. Berbalk, C. Bernerd, A. Borschevsky, A. A. Breier, K. Chrysalidis, T. E. Cocolios, R. P. de Groote, C. M. Fajardo-Zambrano, K. T. Flanagan, S. Franchoo, R. F. Garcia Ruiz, D. Hanstorp, R. Heinke, P. Imgram, A. Koszorús, A. A. Kyuberis, J. Lim , et al. (16 additional authors not shown)

Abstract: The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. Ra… ▽ More The radiative lifetime of the $A$ $^2 Π_{1/2}$ (v=0) state in radium monofluoride (RaF) is measured to be 35(1) ns. The lifetime of this state and the related decay rate $Γ= 2.86(8) \times 10^7$ $s^{-1}$ are of relevance to the laser cooling of RaF via the optically closed $A$ $^2 Π_{1/2} \leftarrow X$ $^2Σ_{1/2}$ transition, which makes the molecule a promising probe to search for new physics. RaF is found to have a comparable photon-scattering rate to homoelectronic laser-coolable molecules. Thanks to its highly diagonal Franck-Condon matrix, it is expected to scatter an order of magnitude more photons than other molecules when using just 3 cooling lasers, before it decays to a dark state. The lifetime measurement in RaF is benchmarked by measuring the lifetime of the $8P_{3/2}$ state in Fr to be 83(3) ns, in agreement with literature. △ Less

Submitted 6 June, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Comments: Accepted as a Letter in Physical Review A; 8 pages of main text, 5 pages of supplemental material

Second gadolinium loading to Super-Kamiokande

Authors: K. Abe, C. Bronner, Y. Hayato, K. Hiraide, K. Hosokawa, K. Ieki, M. Ikeda, J. Kameda, Y. Kanemura, R. Kaneshima, Y. Kashiwagi, Y. Kataoka, S. Miki, S. Mine, M. Miura, S. Moriyama, Y. Nakano, M. Nakahata, S. Nakayama, Y. Noguchi, K. Sato, H. Sekiya, H. Shiba, K. Shimizu, M. Shiozawa , et al. (225 additional authors not shown)

Abstract: The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was do… ▽ More The first loading of gadolinium (Gd) into Super-Kamiokande in 2020 was successful, and the neutron capture efficiency on Gd reached 50\%. To further increase the Gd neutron capture efficiency to 75\%, 26.1 tons of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was additionally loaded into Super-Kamiokande (SK) from May 31 to July 4, 2022. As the amount of loaded $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$ was doubled compared to the first loading, the capacity of the powder dissolving system was doubled. We also developed new batches of gadolinium sulfate with even further reduced radioactive impurities. In addition, a more efficient screening method was devised and implemented to evaluate these new batches of $\rm Gd_2(\rm SO_4)_3\cdot \rm 8H_2O$. Following the second loading, the Gd concentration in SK was measured to be $333.5\pm2.5$ ppm via an Atomic Absorption Spectrometer (AAS). From the mean neutron capture time constant of neutrons from an Am/Be calibration source, the Gd concentration was independently measured to be 332.7 $\pm$ 6.8(sys.) $\pm$ 1.1(stat.) ppm, consistent with the AAS result. Furthermore, during the loading the Gd concentration was monitored continually using the capture time constant of each spallation neutron produced by cosmic-ray muons,and the final neutron capture efficiency was shown to become 1.5 times higher than that of the first loaded phase, as expected. △ Less

Submitted 18 June, 2024; v1 submitted 12 March, 2024; originally announced March 2024.

Comments: 34 pages, 13 figures, submitted to Nuclear Inst. and Methods in Physics Research, A

Journal ref: Nuclear Inst. and Methods in Physics Research, A 1065 (2024) 169480

Pedophysics: an open-source python package for soil geophysics

Authors: Gaston Mendoza Veirana, Philippe De Smedt, Jeroen Verhegge, Wim Cornelis

Abstract: This study introduces Pedophysics, an open-source Python package designed to facilitate solutions for users who work in the field of soil assessment using near-surface geophysical electromagnetic techniques. At the core of this software is the ability to translate geophysical data into specific soil properties (and vice-versa) using pedophysical models (PM). Pedophysical modelling techniques offer… ▽ More This study introduces Pedophysics, an open-source Python package designed to facilitate solutions for users who work in the field of soil assessment using near-surface geophysical electromagnetic techniques. At the core of this software is the ability to translate geophysical data into specific soil properties (and vice-versa) using pedophysical models (PM). Pedophysical modelling techniques offer valuable insights into various realms including precision agriculture, soil health, resource prospecting, nutrient and land management, hydrogeology, and heritage conservation. In develo** a tool for pedophysical modelling, some challenges emerged: selecting suitable PMs from the extensive literature, adapting these to specific conditions, and ensuring adequate data availability. While addressing these, we designed an automated workflow that implements robust PMs (selected after a throughout review), apply different modelling approaches based on soil characteristics and targeted properties, and employs pedotransfer functions and assumptions to integrate missing soil data into PMs. The capabilities of Pedophysics extend to handling complex scenarios such as fusing data from different instruments, incorporating continuous monitoring measurements, and soil calibration data. With these solutions, Pedophysics automates the process of deriving targeted soil and geophysical properties with state-of-art accuracy. Hereby, users can rely on Pedophysics to implement specific knowledge about pedophysical modeling. The software promotes global access to advanced soil geophysical solutions by being open-source and encouraging community contributions. Pedophysics is written in pure Python and has minimal dependencies. It can be easily installed from the Python Package Index (PyPI). △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: Submitted to a Q1 journal, awaiting review and further publication

Quantifying Media Influence on Covid-19 Mask-Wearing Beliefs

Authors: Nicholas Rabb, Nitya Nadgir, Jan P. de Ruiter, Lenore Cowen

Abstract: How political beliefs change in accordance with media exposure is a complicated matter. Some studies have been able to demonstrate that groups with different media diets in the aggregate (e.g., U.S. media consumers ingesting partisan news) arrive at different beliefs about policy issues, but proving this from data at a granular level -- at the level of attitudes expressed in news stories -- remain… ▽ More How political beliefs change in accordance with media exposure is a complicated matter. Some studies have been able to demonstrate that groups with different media diets in the aggregate (e.g., U.S. media consumers ingesting partisan news) arrive at different beliefs about policy issues, but proving this from data at a granular level -- at the level of attitudes expressed in news stories -- remains difficult. In contrast to existing opinion formation models that describe granular detail but are not data-driven, or data-driven studies that rely on simple keyword detection and miss linguistic nuances, being able to identify complicated attitudes in news text and use this data to drive models would enable more nuanced empirical study of opinion formation from media messaging. This study contributes a dataset as well as an analysis that allows the map** of attitudes from individual news stories to aggregate changes of opinion over time for an important public health topic where opinion differed in the U.S. by partisan media diet: Covid mask-wearing beliefs. By gathering a dataset of U.S. news media stories, from April 6 to June 8, 2020, annotated according to Howard 2020's Face Mask Perception Scale for their statements regarding Covid-19 mask-wearing, we demonstrate fine-grained correlations between media messaging and empirical opinion polling data from a Gallup survey conducted during the same period. We also demonstrate that the data can be used for quantitative analysis of pro- and anti-mask sentiment throughout the period, identifying major events that drove opinion changes. This dataset is made publicly available and can be used by other researchers seeking to evaluate how mask-wearing attitudes were driven by news media content. Additionally, we hope that its general method can be used to enable other media researchers to conduct more detailed analyses of media effects on opinion. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

BINGO innovative assembly for background reduction in bolometric $0νββ$ experiments

Authors: A. Armatol, C. Augier, I. C. Bandac, D. Baudin, G. Benato, V. Berest, L. Bergé, J. Billard, J. M. Calvo-Mozota, P. Carniti, M. Chapellier, F. A. Danevich, M. De Jesus, T. Dixon, L. Dumoulin, F. Ferri, J. Gascon, A. Giuliani, H. Gomez, C. Gotti, Ph. Gras, M. Gros, A. Juillard, H. Khalife, V. V. Kobychev , et al. (23 additional authors not shown)

Abstract: BINGO is a project aiming to set the grounds for large-scale bolometric neutrinoless double-beta-decay experiments capable of investigating the effective Majorana neutrino mass at a few meV level. It focuses on develo** innovative technologies (a detector assembly, cryogenic photodetectors and active veto) to achieve a very low background index, of the order of $10^{-5}$ counts/(keV kg yr) in th… ▽ More BINGO is a project aiming to set the grounds for large-scale bolometric neutrinoless double-beta-decay experiments capable of investigating the effective Majorana neutrino mass at a few meV level. It focuses on develo** innovative technologies (a detector assembly, cryogenic photodetectors and active veto) to achieve a very low background index, of the order of $10^{-5}$ counts/(keV kg yr) in the region of interest. The BINGO demonstrator, called MINI-BINGO, is designed to investigate the promising double-beta-decay isotopes $^{100}$Mo and $^{130}$Te and it will be composed of Li$_2$MoO$_4$ and TeO$_2$ crystals coupled to bolometric light detectors and surrounded by a Bi$_4$Ge$_3$O$_{12}$-based veto. This will allow us to reject a significant background in bolometers caused by surface contamination from $α$-active radionuclides by means of light yield selection and to mitigate other sources of background, such as surface contamination from $β$-active radionuclides, external $γ$ radioactivity, and pile-up due to random coincidence of background events. This paper describes an R\&D program towards the BINGO goals, particularly focusing on the development of an innovative assembly designed to reduce the passive materials within the line of sight of the detectors, which is expected to be a dominant source of background in next-generation bolometric experiments. We present the performance of two prototype modules -- housing four cubic (4.5-cm side) Li$_2$MoO$_4$ crystals in total -- operated in the Canfranc underground laboratory in Spain within a facility developed for the CROSS double-beta-decay experiment. △ Less

Submitted 8 July, 2024; v1 submitted 19 February, 2024; originally announced February 2024.

Comments: Submitted to Nucl. Instr. Meth. A; 28 pages, 11 figures, 4 tables

Electric Field Induced Associations in the Double Layer of Salt-in-Ionic-Liquid Electrolytes

Authors: Daniel M. Markiewitz, Zachary A. H. Goodwin, Michael McEldrew, J. Pedro de Souza, Xuhui Zhang, Rosa M. Espinosa-Marzal, Martin Z. Bazant

Abstract: Ionic liquids (ILs) are an extremely exciting class of electrolytes for energy storage applications because of their unique combination of properties. Upon dissolving alkali metal salts, such as Li or Na based salts, with the same anion as the IL, an intrinsically asymmetric electrolyte can be created for use in batteries, known as a salt-in-ionic liquid (SiIL). These SiILs have been well studied… ▽ More Ionic liquids (ILs) are an extremely exciting class of electrolytes for energy storage applications because of their unique combination of properties. Upon dissolving alkali metal salts, such as Li or Na based salts, with the same anion as the IL, an intrinsically asymmetric electrolyte can be created for use in batteries, known as a salt-in-ionic liquid (SiIL). These SiILs have been well studied in the bulk, where negative transference numbers of the alkali metal cation have been observed from the formation of small, negatively charged clusters. The properties of these SiILs at electrified interfaces, however, have received little to no attention. Here, we develop a theory for the electrical double layer (EDL) of SiILs where we consistently account for the thermoreversible association of ions into Cayley tree aggregates. The theory predicts that the IL cations first populate the EDL at negative voltages, as they are not strongly bound to the anions. However at large negative voltages which are strong enough to break the alkali metal cation-anion associations, these IL cations are exchanged for the alkali metal cation because of their higher charge density. At positive voltages, we find that the SiIL actually becomes $\textit{more aggregated while screening the electrode charge}$ from the formation of large, negatively charged aggregates. Therefore, in contrast to conventional intuition of associations in the EDL, SiILs appear to become more associated in certain electric fields. We present these theoretical predictions to be verified by molecular dynamics simulations and experimental measurements. △ Less

Submitted 26 March, 2024; v1 submitted 6 February, 2024; originally announced February 2024.

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Perspective: Atomistic Simulations of Water and Aqueous Systems with Machine Learning Potentials

Authors: Amir Omranpour, Pablo Montero De Hijes, Jörg Behler, Christoph Dellago

Abstract: As the most important solvent, water has been at the center of interest since the advent of computer simulations. While early molecular dynamics and Monte Carlo simulations had to make use of simple model potentials to describe the atomic interactions, accurate ab initio molecular dynamics simulations relying on the first-principles calculation of the energies and forces have opened the way to pre… ▽ More As the most important solvent, water has been at the center of interest since the advent of computer simulations. While early molecular dynamics and Monte Carlo simulations had to make use of simple model potentials to describe the atomic interactions, accurate ab initio molecular dynamics simulations relying on the first-principles calculation of the energies and forces have opened the way to predictive simulations of aqueous systems. Still, these simulations are very demanding, which prevents the study of complex systems and their properties. Modern machine learning potentials (MLPs) have now reached a mature state, allowing to overcome these limitations by combining the high accuracy of electronic structure calculations with the efficiency of empirical force fields. In this Perspective we give a concise overview about the progress made in the simulation of water and aqueous systems employing MLPs, starting from early work on free molecules and clusters via bulk liquid water to electrolyte solutions and solid-liquid interfaces. △ Less

Submitted 31 January, 2024; originally announced January 2024.

Acceleration of the Solar Wind by Ambipolar Electric Field

Authors: Viviane Pierrard, Maximilien Peters de Bonhome

Abstract: Kinetic exospheric models revealed that the solar wind is accelerated by an ambipolar electric field up to supersonic velocities. The presence of suprathermal Strahl electrons at the exobase can further increase the velocity to higher values, leading to profiles comparable to the observations in the fast and slow wind at all radial distances. Such suprathermal electrons are observed at large dista… ▽ More Kinetic exospheric models revealed that the solar wind is accelerated by an ambipolar electric field up to supersonic velocities. The presence of suprathermal Strahl electrons at the exobase can further increase the velocity to higher values, leading to profiles comparable to the observations in the fast and slow wind at all radial distances. Such suprathermal electrons are observed at large distances and recently at low distances as well. Those suprathermal electrons were introduced into the kinetic exospheric model using Kappa distributions. Here, the importance of the exobase's altitude is also underlined for its ability to maintain the electric potential to a higher level for slower winds, conversely to what is induced through the effect of a lower kappa index only. In fact, the exobase is located at lower altitude in the coronal holes where the density is smaller than in the other regions of the corona, allowing the wind originating from the holes to be accelerated from lower distances to higher velocities. The new observations of Parker Solar Probe (PSP) and Solar Orbiter (SolO) from launch to mid-2023 are here used to determine the characteristics of the plasma in the corona so that the model fits best to the averaged observed profiles for the slow and fast winds. The observations at low radial distances show suprathermal electrons already well present in the Strahl in the antisunward direction and a deficit in the sunward direction, confirming the exospheric feature of almost no incoming particles. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 10 pages, 7 figures, solar wind 16 conference proceeding

Anomalous Behavior in the Nucleation of Ice at Negative Pressures

Authors: Valentino Bianco, Pablo Montero de Hijes, Cintia P. Lamas, Eduardo Sanz, Carlos Vega

Abstract: Ice nucleation is a phenomenon that, despite the relevant implications for life, atmospheric sciences, and technological applications, is far from being completely understood, especially under extreme thermodynamic conditions. In this work we present a computational investigation of the homogeneous ice nucleation at negative pressures. By means of the seeding technique we estimate the size of the… ▽ More Ice nucleation is a phenomenon that, despite the relevant implications for life, atmospheric sciences, and technological applications, is far from being completely understood, especially under extreme thermodynamic conditions. In this work we present a computational investigation of the homogeneous ice nucleation at negative pressures. By means of the seeding technique we estimate the size of the ice critical nucleus Nc for the TIP4P/Ice water model. This is done along the isotherms 230, 240, and 250 K, from positive to negative pressures until reaching the liquid-gas kinetic stability limit (where cavitation cannot be avoided). We find that Nc is nonmonotonic upon depressurization, reaching a minimum at negative pressures in the doubly metastable region of water. According to classical nucleation theory we establish the nucleation rate J and the surface tension gamma, revealing a retracing behavior of both when the liquid-gas kinetic stability limit is approached. We also predict a reentrant behavior of the homogeneous nucleation line. The reentrance of these properties is related to the reentrance of the coexistence line at negative pressure, revealing new anomalies of water. The results of this work suggest the possibility of having metastable samples of liquid water for long times at negative pressure provided that heterogeneous nucleation is suppressed. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Journal ref: Physical Review Letters 126, 015704 (2021)

State-dependent complexity of the local field potential in the primary visual cortex

Authors: Rafael M. Jungmann, Thaís Feliciano, Leandro A. A. Aguiar, Carina Soares-Cunha, Bárbara Coimbra, Ana João Rodrigues, Mauro Copelli, Fernanda S. Matias, Nivaldo A. P. de Vasconcelos, Pedro V. Carelli

Abstract: The local field potential (LFP) is as a measure of the combined activity of neurons within a region of brain tissue. While biophysical modeling schemes for LFP in cortical circuits are well established, there is a paramount lack of understanding regarding the LFP properties along the states assumed in cortical circuits over long periods. Here we use a symbolic information approach to determine the… ▽ More The local field potential (LFP) is as a measure of the combined activity of neurons within a region of brain tissue. While biophysical modeling schemes for LFP in cortical circuits are well established, there is a paramount lack of understanding regarding the LFP properties along the states assumed in cortical circuits over long periods. Here we use a symbolic information approach to determine the statistical complexity based on Jensen disequilibrium measure and Shannon entropy of LFP data recorded from the primary visual cortex (V1) of urethane-anesthetized rats and freely moving mice. Using these information quantifiers, we find consistent relations between LFP recordings and measures of cortical states at the neuronal level. More specifically, we show that LFP's statistical complexity is sensitive to cortical state (characterized by spiking variability), as well as to cortical layer. In addition, we apply these quantifiers to characterize behavioral states of freely moving mice, where we find indirect relations between such states and spiking variability. △ Less

Submitted 13 December, 2023; v1 submitted 12 December, 2023; originally announced December 2023.

Numerical determination of iron dust laminar flame speeds with the counterflow twin-flame technique

Authors: C. E. A. G. van Gool, T. Hazenberg, J. A. van Oijen, L. P. H. de Goey

Abstract: Iron dust counter-flow flames have been studied with the low-Mach-number combustion approximation. The model considers full coupling between the two phases, including particle/droplet drag. The dispersed phase flow strain relations are derived under the assumption of low Reynolds number conditions. The importance of solving a particle flow strain model is demonstrated by comparing three different… ▽ More Iron dust counter-flow flames have been studied with the low-Mach-number combustion approximation. The model considers full coupling between the two phases, including particle/droplet drag. The dispersed phase flow strain relations are derived under the assumption of low Reynolds number conditions. The importance of solving a particle flow strain model is demonstrated by comparing three different models: a free unstrained flame, a counter-flow flame where particle flow strain is assumed equal to gas flow strain and one case in which the particle flow strain is solved. All three cases showed preferential diffusion effects, due to the lack of diffusion of iron in the fuel mixture, e.g. DFe,m = 0. The preferential diffusion effect causes a peak in the fuel equivalence ratio in the preheat zone. At the burned side, the combined effect of strain and preferential diffusion showed a decrease in fuel equivalence ratio. Inertia effects, which are only included in the resolved particle flow strain case, counteract this effect and result in an increase of the fuel equivalence ratio at the burned side. A laminar flame speed analysis is performed and a recommendation is given on how to experimentally determine the flame speed in a counter-flow set-up. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 20 pages, 11 figures

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Evaluation of microscale crystallinity modification induced by laser writing on Mn3O4 thin films

Authors: Camila Ianhez-Pereira, Akhil Kuriakose, Ariano De Giovanni Rodrigues, Ana Luiza Costa Silva, Ottavia Jedrkiewicz, Monica Bollani, Marcio Peron Franco de Godoy

Abstract: Defining microstructures and managing local crystallinity allow the implementation of several functionalities in thin film technology. The use of ultrashort Bessel beams for bulk crystallinity modification has garnered considerable attention as a versatile technique for semiconductor materials, dielectrics, or metal oxide substrates. The aim of this work is the quantitative evaluation of the cryst… ▽ More Defining microstructures and managing local crystallinity allow the implementation of several functionalities in thin film technology. The use of ultrashort Bessel beams for bulk crystallinity modification has garnered considerable attention as a versatile technique for semiconductor materials, dielectrics, or metal oxide substrates. The aim of this work is the quantitative evaluation of the crystalline changes induced by ultrafast laser micromachining on manganese oxide thin films using micro-Raman spectroscopy. Pulsed Bessel beams featured by a 1 micrometer-sized central core are used to define structures with high spatial precision. The dispersion relation of Mn3O4 optical phonons is determined by considering the conjunction between X-ray diffraction characterization and the phonon localization model. The asymmetries in Raman spectra indicate phonon localization and enable a quantitative tool to determine the crystallite size at micrometer resolution. The results indicate that laser-writing is effective in modifying the low-crystallinity films locally, increasing crystallite sizes from ~8 nm up to 12 nm, and thus highlighting an interesting approach to evaluate laser-induced structural modifications on metal oxide thin films. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: 27 pages

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Geometry dependence of TLS noise and loss in a-SiC:H parallel plate capacitors for superconducting microwave resonators

Authors: K. Kouwenhoven, G. P. J. van Doorn, B. T. Buijtendorp, S. A. H. de Rooij, D. Lamers, D. J. Thoen, V. Murugesan, J. J. A. Baselmans, P. J. de Visser

Abstract: Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency n… ▽ More Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency noise level depends on the PPC's dimensions has not been experimentally addressed. We measure the frequency noise of 56 resonators with a-SiC:H PPCs, which cover a factor 44 in PPC area and a factor 4 in dielectric thickness. To support the noise analysis, we measure the TLS-induced, power-dependent, intrinsic loss and temperature-dependent resonance frequency shift of the resonators. From the TLS models, we expect a geometry-independent microwave loss and resonance frequency shift, set by the TLS properties of the dielectric. However, we observe a thickness-dependent microwave loss and resonance frequency shift, explained by surface layers that limit the performance of PPC-based resonators. For a uniform dielectric, the frequency noise level should scale directly inversely with the PPC area and thickness. We observe that an increase in PPC size reduces the frequency noise, but the exact scaling is, in some cases, weaker than expected. Finally, we derive an engineering guideline for the design of KIDs based on PPC-based resonators. △ Less

Submitted 8 May, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 13 pages, 11 figures

Journal ref: Phys.Rev.Appl. 21 (2024) 044036

32x100 GHz WDM filter based on ultra-compact silicon rings with a high thermal tuning efficiency of 5.85 mW/pi

Authors: Qingzhong Deng, Ahmed H. El-Saeed, Alaa Elshazly, Guy Lepage, Chiara Marchese, Hakim Kobbi, Rafal Magdziak, Jeroen De Coster, Neha Singh, Marko Ersek Filipcic, Kristof Croes, Dimitrios Velenis, Maumita Chakrabarti, Peter De Heyn, Peter Verheyen, Philippe Absil, Filippo Ferraro, Yoo** Ban, Joris Van Campenhout

Abstract: To the best of our knowledge, this paper has achieved the lowest thermal tuning power (5.85 mW/pi) for silicon rings with FSR>=3.2 THz, and the first silicon ring-based WDM-32x100 GHz filter. To the best of our knowledge, this paper has achieved the lowest thermal tuning power (5.85 mW/pi) for silicon rings with FSR>=3.2 THz, and the first silicon ring-based WDM-32x100 GHz filter. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Comments: 3 pages submitted for conference

Observation of the distribution of nuclear magnetization in a molecule

Authors: S. G. Wilkins, S. M. Udrescu, M. Athanasakis-Kaklamanakis, R. F. Garcia Ruiz, M. Au, I. Belošević, R. Berger, M. L. Bissell, A. A. Breier, A. J. Brinson, K. Chrysalidis, T. E. Cocolios, R. P. de Groote, A. Dorne, K. T. Flanagan, S. Franchoo, K. Gaul, S. Geldhof, T. F. Giesen, D. Hanstorp, R. Heinke, T. Isaev, Á. Koszorús, S. Kujanpää, L. Lalanne , et al. (11 additional authors not shown)

Abstract: Rapid progress in the experimental control and interrogation of molecules, combined with developments in precise calculations of their structure, are enabling new opportunities in the investigation of nuclear and particle physics phenomena. Molecules containing heavy, octupole-deformed nuclei such as radium are of particular interest for such studies, offering an enhanced sensitivity to the proper… ▽ More Rapid progress in the experimental control and interrogation of molecules, combined with developments in precise calculations of their structure, are enabling new opportunities in the investigation of nuclear and particle physics phenomena. Molecules containing heavy, octupole-deformed nuclei such as radium are of particular interest for such studies, offering an enhanced sensitivity to the properties of fundamental particles and interactions. Here, we report precision laser spectroscopy measurements and theoretical calculations of the structure of the radioactive radium monofluoride molecule, $^{225}$Ra$^{19}$F. Our results allow fine details of the short-range electron-nucleus interaction to be revealed, indicating the high sensitivity of this molecule to the distribution of magnetization, currently a poorly constrained nuclear property, within the radium nucleus. These results provide a direct and stringent test of the description of the electronic wavefunction inside the nuclear volume, highlighting the suitability of these molecules to investigate subatomic phenomena. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Bayesian Time-Lapse Full Waveform Inversion using Hamiltonian Monte Carlo

Authors: Paulo Douglas S. de Lima, Mauro S. Ferreira, Gilberto Corso, João M. de Araújo

Abstract: Time-lapse images carry out important information about dynamic changes in Earth's interior which can be inferred using different Full Waveform Inversion (FWI) schemes. The estimation process is performed by manipulating more than one seismic dataset, associated with the baseline and monitors surveys. The time-lapse variations can be so minute and localised that quantifying the uncertainties becom… ▽ More Time-lapse images carry out important information about dynamic changes in Earth's interior which can be inferred using different Full Waveform Inversion (FWI) schemes. The estimation process is performed by manipulating more than one seismic dataset, associated with the baseline and monitors surveys. The time-lapse variations can be so minute and localised that quantifying the uncertainties becomes fundamental to assessing the reliability of the results. The Bayesian formulation of the FWI problem naturally provides confidence levels in the solution, but evaluating the uncertainty of time-lapse seismic inversion remains a challenge due to the ill-posedness and high dimensionality of the problem. The Hamiltonian Monte Carlo (HMC) can be used to effectively sample over high dimensional distributions with affordable computational efforts. In this context, we propose a probabilistic Bayesian sequential approach for time-lapse FWI using the HMC method. Our approach relies on the integration of the baseline survey information as prior knowledge in the monitor estimation. We compare the proposed methodology with a parallel scheme in perfect and perturbed acquisition geometry scenarios. We also investigate the correlation effect between baseline and monitor samples in the propagated uncertainties. The results show that our strategy provides accurate times-lapse estimates with errors of similar magnitude to the parallel methodology. △ Less

Submitted 9 December, 2023; v1 submitted 6 November, 2023; originally announced November 2023.

Comments: 12 pages, 6 figures

Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments

Authors: J. Balibrea Correa, J. Lerendegui-Marco, V. Babiano-Suarez, C. Domingo-Pardo, I. Ladarescu, A. Tarifeño-Saldivia, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, E. Mendoza, A. Pérez de Rada, J. Plaza del Olmo, A. Sánchez-Caballero, A. Casanovas, F. Calviño, S. Valenta, O. Aberle, S. Altieri, S. Amaducci, J. Andrzejewski, M. Bacak, C. Beltrami, S. Bennett, A. P. Bernardes , et al. (109 additional authors not shown)

Abstract: One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects… ▽ More One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Inelastic collisions facilitating runaway electron generation in weakly-ionized plasmas

Authors: Y. Lee, P. Aleynikov, P. C. de Vries, H. -T. Kim, J. Lee, M. Hoppe, J. -K. Park, G. J. Choi, J. Gwak, Y. -S. Na

Abstract: Dreicer generation is one of the main mechanisms of runaway electrons generation, in particular during tokamak startup. In fully ionized plasma it is described as a diffusive flow from the Maxwellian core into high energies under the effect of the electric field. In this work we demonstrate a critical role of the non-differential nature of inelastic collisions in weakly ionized plasma during tokam… ▽ More Dreicer generation is one of the main mechanisms of runaway electrons generation, in particular during tokamak startup. In fully ionized plasma it is described as a diffusive flow from the Maxwellian core into high energies under the effect of the electric field. In this work we demonstrate a critical role of the non-differential nature of inelastic collisions in weakly ionized plasma during tokamak startup, where some electrons experience virtually no collisions during acceleration to the critical energy. We show that using the Fokker-Planck collisional operator can underestimate the Dreicer generation rate by several orders of magnitude. △ Less

Submitted 23 April, 2024; v1 submitted 24 October, 2023; originally announced October 2023.

Electromagnetic Properties of Indium Isotopes Elucidate the Doubly Magic Character of 100Sn

Authors: J. Karthein, C. M. Ricketts, R. F. Garcia Ruiz, J. Billowes, C. L. Binnersley, T. E. Cocolios, J. Dobaczewski, G. J. Farooq-Smith, K. T. Flanagan, G. Georgiev, W. Gins, R. P. de Groote, F. P. Gustafsson, J. D. Holt, A. Kanellakopoulos, Á. Koszorús, D. Leimbach, K. M. Lynch, T. Miyagi, W. Nazarewicz, G. Neyens, P. -G. Reinhard, B. K. Sahoo, A. R. Vernon, S. G. Wilkins , et al. (2 additional authors not shown)

Abstract: Our understanding of nuclear properties in the vicinity of 100Sn, suggested to be the heaviest doubly magic nucleus with equal numbers of protons (Z=50) and neutrons (N=50), has been a long-standing challenge for experimental and theoretical nuclear physics. Contradictory experimental evidence exists on the role of nuclear collectivity in this region of the nuclear chart. Using precision laser spe… ▽ More Our understanding of nuclear properties in the vicinity of 100Sn, suggested to be the heaviest doubly magic nucleus with equal numbers of protons (Z=50) and neutrons (N=50), has been a long-standing challenge for experimental and theoretical nuclear physics. Contradictory experimental evidence exists on the role of nuclear collectivity in this region of the nuclear chart. Using precision laser spectroscopy, we measured the ground-state electromagnetic moments of indium (Z=49) isotopes approaching the N=50 neutron number down to 101In, and nuclear charge radii of 101-131In spanning almost the complete range between the two major neutron closed-shells at N=50 and N=82. Our results for both nuclear charge radii and quadrupole moments reveal striking parabolic trends as a function of the neutron number, with a clear reduction toward these two neutron closed-shells, thus supporting a doubly magic character of 100Sn. Two complementary nuclear many-body frameworks, density functional theory and ab initio methods, elucidate our findings. A detailed comparison with our experimental results exposes deficiencies of nuclear models, establishing a benchmark for future theoretical developments. △ Less

Submitted 16 November, 2023; v1 submitted 23 October, 2023; originally announced October 2023.

Comments: 12 pages, 6 figures, 4 tables; data and code availability statements added; reference titles added

Dynamic stabilization of a hydrogen premixed flame in a narrow channel

Authors: Faizan Habib Vance, Arne Scholtissek, Philip de Goey, Jeroen van Oijen, Christian Hasse

Abstract: Combustion of hydrogen can help in reducing carbon-based emissions but it also poses unique challenges related to the high flame speed and Lewis number effects of the hydrogen flame. When operated with conventional burners, a hydrogen flame can flashback at higher volumetric flow rates than a methane flame due to the difference in stabilization mechanisms of the two fuels. Due to these differences… ▽ More Combustion of hydrogen can help in reducing carbon-based emissions but it also poses unique challenges related to the high flame speed and Lewis number effects of the hydrogen flame. When operated with conventional burners, a hydrogen flame can flashback at higher volumetric flow rates than a methane flame due to the difference in stabilization mechanisms of the two fuels. Due to these differences, conventional burners cannot offer similar operational ranges for hydrogen than that for hydrocarbon flames. An exploration into the unique stabilization behaviour of hydrogen flames is required which could help in envisioning non-conventional burner concepts for kee** hydrogen flames stable. Stability conditions, which describe the kinematics of premixed flames with spatially and temporally changing flow parameters, are crucial for such an exploration. Stability conditions are usually hypothesized for stable flames, where a flame upon perturbation is assumed to return to its original position. Alternatively, in the case of flashback/blow-off, it refers to a flame moving upstream of the burner or being convected out of the domain. However, it is also of interest to understand how and why a flame could move to a new location when the velocity and strain fields are varying with time and space at the original and the new location. In this paper, we investigate the flame stabilization by 1) observing the hydrogen flame's upstream movement in a multi-slit configuration when a geometrical change is made, and 2) changing strain and velocity fields in a dynamic and periodic manner using numerical tools such that the unique behaviour of a hydrogen flame can be captured. △ Less

Submitted 15 October, 2023; originally announced October 2023.

Ground observations of a space laser for the assessment of its in-orbit performance

Authors: The Pierre Auger Collaboration, O. Lux, I. Krisch, O. Reitebuch, D. Huber, D. Wernham, T. Parrinello, :, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira , et al. (358 additional authors not shown)

Abstract: The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the… ▽ More The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 10 pages, 10 figures

Artificial Intelligence for Prediction of Climate Extremes: State of the art, challenges and future perspectives

Authors: Stefano Materia, Lluís Palma García, Chiem van Straaten, Sungmin O, Antonios Mamalakis, Leone Cavicchia, Dim Coumou, Paolo De Luca, Marlene Kretschmer, Markus G. Donat

Abstract: Scientific and technological advances in numerical modelling have improved the quality of climate predictions over recent decades, but predictive skill remains limited in many aspects. Extreme events such as heat and cold waves, droughts, heavy rain and storms are particularly challenging to predict accurately due to their rarity and non-linear chaotic nature, and because of model limitations. How… ▽ More Scientific and technological advances in numerical modelling have improved the quality of climate predictions over recent decades, but predictive skill remains limited in many aspects. Extreme events such as heat and cold waves, droughts, heavy rain and storms are particularly challenging to predict accurately due to their rarity and non-linear chaotic nature, and because of model limitations. However, recent studies have shown that predictive skill of extremes can be increased when using more sophisticated approaches, indicating that there might be systemic predictability that is not being leveraged. Recently, numerous studies have been devoted to the exploitation of Artificial Intelligence (AI) to study the predictability and make predictions of weather and climate. AI techniques have shown great potential to improve the prediction of extreme events and uncover their links to large-scale and local drivers. Machine and deep learning, causal discovery, explainable AI, are only some of the approaches that have been tested to both improve our understanding of the processes underlying predictability and enhance prediction skill of extreme events. Results are promising, especially for hybrid predictions that combine the AI, which can reveal and exploit unknown spatio-temporal connections from data, and climate models, that provide the theoretical foundation and interpretability of the physical world. On the other hand, challenges are multiple in many aspects, from data curation to model uncertainty and generalizability, to the reproducibility of methods and workflows. A few best practices are identified to increase trust in these novel techniques, and future perspectives are envisaged for further scientific development. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Comments: 20 pages, 4 figures, 2 tables

Why every observatory needs a disco ball

Authors: Robert J. Cumming, Alexander G. M. Pietrow, Livia Pietrow, Maria Cavallius, Dominique Petit dit de la Roche, Casper Pietrow, Ilane Schroetter, Moa Skan

Abstract: Commercial disco balls provide a safe, effective and instructive way of observing the Sun. We explore the optics of solar projections with disco balls, and find that while sunspot observations are challenging, the solar disk and its changes during eclipses are easy and fun to observe. We explore the disco ball's potential for observing the moon and other bright astronomical phenomena. Commercial disco balls provide a safe, effective and instructive way of observing the Sun. We explore the optics of solar projections with disco balls, and find that while sunspot observations are challenging, the solar disk and its changes during eclipses are easy and fun to observe. We explore the disco ball's potential for observing the moon and other bright astronomical phenomena. △ Less

Submitted 27 September, 2023; v1 submitted 25 September, 2023; originally announced September 2023.

Comments: 6 pages, 7 figures. Submitted to Physics Education. Comments welcome

Deep-learning-powered data analysis in plankton ecology

Authors: Harshith Bachimanchi, Matthew I. M. Pinder, Chloé Robert, Pierre De Wit, Jonathan Havenhand, Alexandra Kinnby, Daniel Midtvedt, Erik Selander, Giovanni Volpe

Abstract: The implementation of deep learning algorithms has brought new perspectives to plankton ecology. Emerging as an alternative approach to established methods, deep learning offers objective schemes to investigate plankton organisms in diverse environments. We provide an overview of deep-learning-based methods including detection and classification of phyto- and zooplankton images, foraging and swimm… ▽ More The implementation of deep learning algorithms has brought new perspectives to plankton ecology. Emerging as an alternative approach to established methods, deep learning offers objective schemes to investigate plankton organisms in diverse environments. We provide an overview of deep-learning-based methods including detection and classification of phyto- and zooplankton images, foraging and swimming behaviour analysis, and finally ecological modelling. Deep learning has the potential to speed up the analysis and reduce the human experimental bias, thus enabling data acquisition at relevant temporal and spatial scales with improved reproducibility. We also discuss shortcomings and show how deep learning architectures have evolved to mitigate imprecise readouts. Finally, we suggest opportunities where deep learning is particularly likely to catalyze plankton research. The examples are accompanied by detailed tutorials and code samples that allow readers to apply the methods described in this review to their own data. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: For the associated GitHub repository, see https://github.com/softmatterlab/Deep-learning-in-plankton-ecology

Pinning down electron correlations in RaF via spectroscopy of excited states

Authors: M. Athanasakis-Kaklamanakis, S. G. Wilkins, L. V. Skripnikov, A. Koszorus, A. A. Breier, M. Au, I. Belosevic, R. Berger, M. L. Bissell, A. Borschevsky, A. Brinson, K. Chrysalidis, T. E. Cocolios, R. P. de Groote, A. Dorne, C. M. Fajardo-Zambrano, R. W. Field, K. T. Flanagan, S. Franchoo, R. F. Garcia Ruiz, K. Gaul, S. Geldhof, T. F. Giesen, D. Hanstorp, R. Heinke , et al. (16 additional authors not shown)

Abstract: We report the spectroscopy of 11 electronic states in the radioactive molecule radium monofluoride (RaF). The observed excitation energies are compared with state-of-the-art relativistic Fock-space coupled cluster (FS-RCC) calculations, which achieve an agreement of >99.71% (within ~8 meV) for all states. High-order electron correlation and quantum electrodynamics corrections are found to be impor… ▽ More We report the spectroscopy of 11 electronic states in the radioactive molecule radium monofluoride (RaF). The observed excitation energies are compared with state-of-the-art relativistic Fock-space coupled cluster (FS-RCC) calculations, which achieve an agreement of >99.71% (within ~8 meV) for all states. High-order electron correlation and quantum electrodynamics corrections are found to be important at all energies. Establishing the accuracy of calculations is an important step towards high-precision studies of these molecules, which are proposed for sensitive searches of physics beyond the Standard Model. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: Submitted for publication

Flexible Physical Unclonable Functions based on non-deterministically distributed Dye-Doped Fibers and Droplets

Authors: Mauro Daniel Luigi Bruno, Giuseppe Emanuele Lio, Antonio Ferraro, Sara Nocentini, Giuseppe Papuzzo, Agostino Forestiero, Giovanni Desiderio, Maria Penelope De Santo, Diederik Sybolt Wiersma, Roberto Caputo, Giovanni Golemme, Francesco Riboli, Riccardo Cristoforo Barberi

Abstract: The development of new anti-counterfeiting solutions is a constant challenge and involves several research fields. Much interest is devoted to systems that are impossible to clone, based on the Physical Unclonable Function (PUF) paradigm. In this work, new strategies based on electrospinning and electrospraying of dye-doped polymeric materials are presented for the manufacturing of flexible free-s… ▽ More The development of new anti-counterfeiting solutions is a constant challenge and involves several research fields. Much interest is devoted to systems that are impossible to clone, based on the Physical Unclonable Function (PUF) paradigm. In this work, new strategies based on electrospinning and electrospraying of dye-doped polymeric materials are presented for the manufacturing of flexible free-standing films that embed different PUF keys. Films can be used to fabricate anticounterfeiting labels having three encryption levels: i) a map of fluorescent polymer droplets, with non deterministic positions on a dense yarn of polymer nanofibers; ii) a characteristic fluorescence spectrum for each label; iii) a challenge-response pairs (CRPs) identification protocol based on the strong nature of the physical unclonable function. The intrinsic uniqueness introduced by the deposition techniques encodes enough complexity into the optical anti-counterfeiting tag to generate thousands of cryptographic keys. The simple and cheap fabrication process as well as the multilevel authentication makes such colored polymeric unclonable tags a practical solution in the secure protection of merchandise in our daily life. △ Less

Submitted 19 July, 2023; originally announced August 2023.

On the effect of the maximal proper acceleration in the inertia

Authors: Ricardo Gallego Torromé, Pedro Fernández de Córdoba

Abstract: The effect of an hypothetical maximal proper acceleration on the inertial mass of charged particles is investigated in the context of particle accelerators. In particular, it is shown that maximal acceleration implies a reduction of the luminosity of the bunches relative with respect to the expected luminosity in the relativistic models of the bunches. This relative loss in luminosity is of the or… ▽ More The effect of an hypothetical maximal proper acceleration on the inertial mass of charged particles is investigated in the context of particle accelerators. In particular, it is shown that maximal acceleration implies a reduction of the luminosity of the bunches relative with respect to the expected luminosity in the relativistic models of the bunches. This relative loss in luminosity is of the order $10^{-7}$ for the LHC and of order $10^{-4}$ for current laser plasma accelerators facilities. Although this effect is small, it increases with the square of the number of particles in the bunch. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 10 pages

MSC Class: 83A05; 78A05

Test of $^{116}$CdWO$_4$ and Li$_2$MoO$_4$ scintillating bolometers in the CROSS underground facility with upgraded detector suspension

Authors: A. Ahmine, I. C. Bandac, A. S. Barabash, V. Berest, L. Bergé, J. M. Calvo-Mozota, P. Carniti, M. Chapellier, I. Dafinei, F. A. Danevich, T. Dixon, L. Dumoulin, F. Ferri, A. Giuliani, C. Gotti, P. Gras, D. L. Helis, A. Ianni, L. Imbert, H. Khalife, V. V. Kobychev, S. I. Konovalov, P. Loaiza, P. de Marcillac, S. Marnieros , et al. (16 additional authors not shown)

Abstract: In preparation to the CROSS $2β$ decay experiment, we installed a new detector suspension with magnetic dum** inside a pulse-tube cryostat of a dedicated low-background facility at the LSC (Spain). The suspension was tested with two scintillating bolometers based on large-volume 116CdWO4 (CWO-enr) and Li2MoO4 (LMO) crystals. The former, a reference device, was used for testing new noise conditio… ▽ More In preparation to the CROSS $2β$ decay experiment, we installed a new detector suspension with magnetic dum** inside a pulse-tube cryostat of a dedicated low-background facility at the LSC (Spain). The suspension was tested with two scintillating bolometers based on large-volume 116CdWO4 (CWO-enr) and Li2MoO4 (LMO) crystals. The former, a reference device, was used for testing new noise conditions and for comparing bolometric performance of an advanced Li2MoO4 crystal developed in the framework of the CLYMENE project, in view of next-generation double-beta decay experiments like CUPID. We cooled down detectors to 15 mK and achieved high performance for all tested devices. In particular both CWO-enr and LMO bolometers demonstrated the energy resolution of 6 keV FWHM for the 2.6 MeV gamma quanta, among the best for thermal detectors based on such compounds. The baseline noise resolution (FWHM) of the CWO-enr detector was improved by 2 keV, compared to the best previous measurement of this detector in the CROSS facility, while the noise of the Ge-based optical bolometer was improved by a factor 2, to 100 eV FWHM. Despite of the evident progress in the improving of noise conditions of the set-up, we see high-frequency harmonics of a pulse-tube induced noise, suggesting a noise pick-up by cabling. Another Ge light detector was assisted with the signal amplification exploiting the Neganov-Trofimov-Luke effect, which allowed to reach 20 eV FWHM noise resolution by applying 60 V electrode bias. Highly-efficient particle identification was achieved with both detectors, despite a low scintillation efficiency of the LMO material. The radiopurity level of the LMO crystal is rather high; only traces of 210Po and 226Ra were detected (0.1 mBq/kg each), while the 228Th activity is expected to be at least an order of magnitude lower, as well as a 40K activity is found to be < 6 mBq/kg. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: Prepared for submission to JINST, 26 pages, 8 figures, 2 tables