-
Detection of a 2.85 micrometer Feature on 5 Spinel-rich Asteroids from JWST
Authors:
Jonathan Gomez Barrientos,
Katherine de Kleer,
Bethany L. Ehlmann,
Francois L. H. Tissot,
Jessica Mueller
Abstract:
Ground-based observations of `Barbarian' L-type asteroids at 1 to 2.5-$μ$m indicate that their near-infrared spectra are dominated by the mineral spinel, which has been attributed to a high abundance of calcium-aluminum inclusions (CAIs) -- the first solids to condense out of the protoplanetary disk during the formation of the Solar System. However, the spectral properties of these asteroids from…
▽ More
Ground-based observations of `Barbarian' L-type asteroids at 1 to 2.5-$μ$m indicate that their near-infrared spectra are dominated by the mineral spinel, which has been attributed to a high abundance of calcium-aluminum inclusions (CAIs) -- the first solids to condense out of the protoplanetary disk during the formation of the Solar System. However, the spectral properties of these asteroids from 2.5 to 5-$μ$m, a wavelength region that covers signatures of hydrated minerals, water, and organics, have not yet been explored. Here, we present 2 to 5-$μ$m reflectance spectra of five spinel-rich asteroids obtained with the NIRSpec instrument on the James Webb Space Telescope. All five targets exhibit a $\sim$ 2.85-$μ$m absorption feature with a band depth of 3-6$\%$ that appears correlated in strength with that of the 2-$μ$m spinel absorption feature. The shape and position of the 2.85-$μ$m feature are not a good match to the 2.7-$μ$m feature commonly seen in carbonaceous CM meteorites or C-type asteroids. The closest spectral matches are to the Moon and Vesta, suggesting commonalities in aqueous alteration across silicate bodies, infall of hydrated material, and/or space weathering by solar wind H implantation. Lab spectra of CO/CV chondrites, CAIs, as well as the minerals cronstedtite and spinel, also show a similar feature, providing clues into the origin of the 2.85-$μ$m feature.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
The LHCb VELO Upgrade Module Construction
Authors:
K. Akiba,
M. Alexander,
C. Bertella,
A. Biolchini,
A. Bitadze,
G. Bogdanova,
S. Borghi,
T. J. V. Bowcock,
K. Bridges,
M. Brock,
A. T. Burke,
J. Buytaert,
W. Byczynski,
J. Carroll,
V. Coco,
P. Collins,
A. Davis,
O. De Aguiar Francisco,
K. De Bruyn,
S. De Capua,
K. De Roo,
F. Doherty,
L. Douglas,
L. Dufour,
R. Dumps
, et al. (62 additional authors not shown)
Abstract:
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon dete…
▽ More
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022.
△ Less
Submitted 21 April, 2024;
originally announced April 2024.
-
Identification of Settling Velocity with Physics Informed Neural Networks For Sediment Laden Flows
Authors:
Mickaël Delcey,
Yoann Cheny,
Jean-Baptiste Keck,
Adrien Gans,
Sébastien Kiesgen De Richter
Abstract:
Physics-Informed Neural Networks (PINNs) have shown great potential in the context of fluid dynamics simulations, particularly in reconstructing flow fields and identifying key parameters. In this study, we explore the application of PINNs to recover the dimensionless settling velocity for sedimentation flow. The flow involves sediment-laden fresh water overlying salt water, which is described by…
▽ More
Physics-Informed Neural Networks (PINNs) have shown great potential in the context of fluid dynamics simulations, particularly in reconstructing flow fields and identifying key parameters. In this study, we explore the application of PINNs to recover the dimensionless settling velocity for sedimentation flow. The flow involves sediment-laden fresh water overlying salt water, which is described by Navier-Stokes equations coupled with sediment concentration and salinity transport equations. Two cases are investigated: one where the training data contains the salinity and sediment concentration fields, and another where it contains the velocity field. For both cases, we investigate several flow regimes and show that the model is capable of inferring the unknown parameter and reconstructing the hydrodynamic field of the flow. The quality of the model inference is assessed by comparing it with numerical simulations from a high-fidelity semi-Lagrangian solver. We demonstrate the model's robustness to noise by training it with data corrupted by noise of varying magnitudes, highlighting the potential of PINNs for real-world applications.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
A multi-step calibration strategy for reliable parameter determination of salt rock mechanics constitutive models
Authors:
Hermínio T. Honório,
Maartje Houben,
Kevin Bisdom,
Arjan van der Linden,
Karin de Borst,
Lambertus J. Sluys,
Hadi Hajibeygi
Abstract:
Renewable hydrogen storage in salt caverns requires fast injection and production rates to cope with the imbalance between energy production and consumption. Such operational conditions raise concerns about the mechanical stability of salt caverns. Choosing an appropriate constitutive model for salt mechanics is an important step in investigating this issue, and many constitutive models with sever…
▽ More
Renewable hydrogen storage in salt caverns requires fast injection and production rates to cope with the imbalance between energy production and consumption. Such operational conditions raise concerns about the mechanical stability of salt caverns. Choosing an appropriate constitutive model for salt mechanics is an important step in investigating this issue, and many constitutive models with several parameters have been presented in the literature. However, a robust calibration strategy to reliably determine which model and which parameter set represent the given rock, based on stress-strain data, remains an unsolved challenge. For the first time in the community, we present a multi-step strategy to determine a single parameter set based on many deformation datasets for salt rocks. Towards this end, we first develop a comprehensive constitutive model able to capture all relevant nonlinear deformation physics of transient, reverse, and steady-state creep. The determination of the single set of representative material parameters is achieved by framing the calibration process as an optimization problem, for which the global PSO algorithm is employed. Dynamic data integration is achieved by a multi-step calibration strategy for a situation where experiments are included one at a time, as they become available. Additionally, our calibration strategy is made flexible to account for mild heterogeneity between rock samples, resulting in a single set of parameters that is representative of the deformation datasets. As a rigorous mathematical analysis and the lack of relevant experimental datasets, we consider a wide range of synthetic experimental data, inspired by the existing sparse relevant data in the literature. The results of our performance analyses show that the proposed calibration strategy is robust and accuracy is improved as more experiments are included for calibration.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Mass supply from Io to Jupiter's magnetosphere
Authors:
L. Roth,
A. Blöcker,
K. de Kleer,
D. Goldstein,
E. Lellouch,
J. Saur,
C. Schmidt,
D. F. Strobel,
C. Tao,
F. Tsuchiya,
V. Dols,
H. Huybrighs,
A. Mura,
J. R. Szalay,
S. V. Badman,
I. de Pater,
A. -C. Dott,
M. Kagitani,
L. Klaiber,
R. Koga,
A. McEwen,
Z. Milby,
K. D. Retherford,
S. Schlegel,
N. Thomas
, et al. (2 additional authors not shown)
Abstract:
Since the Voyager mission flybys in 1979, we have known the moon Io to be extremely volcanically active as well as to be the main source of plasma in the vast magnetosphere of Jupiter. Material lost from Io forms neutral clouds, the Io plasma torus and ultimately the extended plasma sheet. This material is supplied from the upper atmosphere and atmospheric loss is likely driven by plasma-interacti…
▽ More
Since the Voyager mission flybys in 1979, we have known the moon Io to be extremely volcanically active as well as to be the main source of plasma in the vast magnetosphere of Jupiter. Material lost from Io forms neutral clouds, the Io plasma torus and ultimately the extended plasma sheet. This material is supplied from the upper atmosphere and atmospheric loss is likely driven by plasma-interaction effects with possible contributions from thermal escape and photochemistry-driven escape. Direct volcanic escape is negligible. The supply of material to maintain the plasma torus was estimated from various methods at roughly one ton per second. Most of the time the magnetospheric plasma environment of Io is stable on timescales from days to months. Similarly, Io's atmosphere was found to have a stable average density on the dayside, although it exhibits lateral, diurnal and seasonal variations. There is a potential positive feedback in the Io torus supply: collisions of torus plasma with atmospheric neutrals likely are a significant loss process, which increases with torus density. The stability of the torus environment might be maintained by limiting mechanisms of either torus supply from Io or the loss from the torus by centrifugal interchange in the middle magnetosphere. Various observations suggest that occasionally the plasma torus undergoes major transient changes over a period of several weeks, apparently overcoming possible stabilizing mechanisms. Such events (and more frequent minor changes) are commonly explained by some kind of change in volcanic activity that triggers a chain of reactions which modify the plasma torus state via a net increase in supply of new mass. However, it remains unknown what kind of volcanic event can trigger torus events, whether Io's atmosphere undergoes a change before or during such magnetospheric events, and what processes could enable such a change.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Electromagnetic Scattering at an Arbitrarily Accelerated Interface
Authors:
Klaas De Kinder,
Christophe Caloz
Abstract:
We present a general analytical solution to the problem of electromagnetic scattering at a one-dimensional arbitrarily accelerated space-time engineered-modulation (ASTEM) interface in the subluminal regime. We show that such an interface fundamentally produces chir**, whose profile can be designed according to specifications. This work represents an important step in the development of ASTEM cr…
▽ More
We present a general analytical solution to the problem of electromagnetic scattering at a one-dimensional arbitrarily accelerated space-time engineered-modulation (ASTEM) interface in the subluminal regime. We show that such an interface fundamentally produces chir**, whose profile can be designed according to specifications. This work represents an important step in the development of ASTEM crystals and holds significant potential for applications in microwave and optical devices reliant on chirp-based functionalities.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Subsurface Thermophysical Properties of Europa's Leading and Trailing Hemispheres as Revealed by ALM
Authors:
A. E. Thelen,
K. de Kleer,
M. Camarca,
A. Akins,
M. Gurwell,
B. Butler,
I. de Pater
Abstract:
We present best-fit values of porosity -- and the corresponding effective thermal inertiae -- determined from three different depths in Europa's near-subsurface (~1-20 cm). The porosity of the upper ~20 cm of Europa's subsurface varies between 75-50% ($Γ_{eff}\approx50-140$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$) on the leading hemisphere and 50-40% ($Γ_{eff}\approx140-180$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$)…
▽ More
We present best-fit values of porosity -- and the corresponding effective thermal inertiae -- determined from three different depths in Europa's near-subsurface (~1-20 cm). The porosity of the upper ~20 cm of Europa's subsurface varies between 75-50% ($Γ_{eff}\approx50-140$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$) on the leading hemisphere and 50-40% ($Γ_{eff}\approx140-180$ J m$^{-2}$ K$^{-1}$ s$^{-1/2}$) on the trailing hemisphere. Residual maps produced by comparison with these models reveal thermally anomalous features that cannot be reproduced by globally homogeneous porosity models. These regions are compared to Europa's surface terrain and known compositional variations. We find that some instances of warm thermal anomalies are co-located with known geographical or compositional features on both the leading and trailing hemisphere; cool temperature anomalies are well correlated with surfaces previously observed to contain pure, crystalline water ice and the expansive rays of Pwyll crater. Anomalous regions correspond to locations with subsurface properties different from those of our best-fit models, such as potentially elevated thermal inertia, decreased emissivity, or more porous regolith. We also find that ALMA observations at ~3 mm sound below the thermal skin depth of Europa (~10-15 cm) for a range of porosity values, and thus do not exhibit features indicative of diurnal variability or residuals similar to other frequency bands. Future observations of Europa at higher angular resolution may reveal additional locations of variable subsurface thermophysical properties, while those at other wavelengths will inform our understanding of the regolith compaction length and the effects of external processes on the shallow subsurface.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Micro and Nano 3D investigation of complex gut alterations-dementia interplay
Authors:
F. Palermo,
N. Marrocco,
L. Dacomo,
E. Grisafi,
M. Musella,
V. Moresi,
A. Sanna,
L. Massimi,
I. Bukreeva,
O. Junemann,
I. Viola,
M. Eckermann,
P. Cloetens,
T. Weitkamp,
G. Gigli,
G. Logroscino,
N. Kerlero de Rosbo,
C. Balducci,
A. Cedola
Abstract:
Alzheimer's disease (AD), a debilitating neurodegenerative disorder, remains one of the foremost public health challenges of our time. Despite decades of research, its etiology largely remains enigmatic. Recently, attention has turned to the gut-brain axis, a complex network of communication between the gastrointestinal tract and the brain, as a potential player in the pathogenesis of AD. Here we…
▽ More
Alzheimer's disease (AD), a debilitating neurodegenerative disorder, remains one of the foremost public health challenges of our time. Despite decades of research, its etiology largely remains enigmatic. Recently, attention has turned to the gut-brain axis, a complex network of communication between the gastrointestinal tract and the brain, as a potential player in the pathogenesis of AD. Here we exploited X-ray Phase Contrast Tomography to provide an in-depth analysis of the link between the gut condition and AD, exploring gut anatomy and structure in murine models. We conducted a comprehensive analysis by comparing the outcomes in various mouse models of cognitive impairment, including AD, frail mice, and frontotemporal dementia (FTD) affected mice. We discovered an association between substantial changes in the gut structure and the presence of amyloid-beta (A\b{eta}) in the brain. We found that the most important gut alterations are related to A\b{eta} occurrence in the brain. In particular, we investigated the gut morphology, the distribution of enteric micro-processes and neurons in the ileum. Understanding the intricate interplay between gut condition and dementia may open new avenues for early AD diagnosis and treatment offering hope for a future where these diseases may be more effectively addressed.
△ Less
Submitted 24 April, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Statistics of Turbulence in the Solar Wind. I. What is the Reynolds Number of the Solar Wind?
Authors:
Daniel Wrench,
Tulasi N. Parashar,
Sean Oughton,
Kevin de Lange,
Marcus Frean
Abstract:
The Reynolds number, Re, is an important quantity for describing a turbulent flow. It tells us about the bandwidth over which energy can cascade from large scales to smaller ones, prior to the onset of dissipation. However, calculating it for nearly collisionless plasmas like the solar wind is challenging. Previous studies have used "effective" Reynolds number formulations, expressing Re as a func…
▽ More
The Reynolds number, Re, is an important quantity for describing a turbulent flow. It tells us about the bandwidth over which energy can cascade from large scales to smaller ones, prior to the onset of dissipation. However, calculating it for nearly collisionless plasmas like the solar wind is challenging. Previous studies have used "effective" Reynolds number formulations, expressing Re as a function of the correlation scale and either the Taylor scale or a proxy for the dissipation scale. We find that the Taylor scale definition of the Reynolds number has a sizeable prefactor of approximately 27, which has not been employed in previous works. Drawing from 18 years of data from the Wind spacecraft at 1 au, we calculate the magnetic Taylor scale directly and use both the ion inertial length and the magnetic spectrum break scale as approximations for the dissipation scale, yielding three distinct Re estimates for each 12-hour interval. Average values of Re range between 116,000 and 3,406,000, within the general distribution of past work. We also find considerable disagreement between the methods, with linear associations of between 0.38 and 0.72. Although the Taylor scale method is arguably more physically motivated, due to its dependence on the energy cascade rate, more theoretical work is needed in order to identify the most appropriate way of calculating effective Reynolds numbers for kinetic plasmas. As a summary of our observational analysis, we make available a data product of 28 years of 1 au solar wind and magnetospheric plasma measurements from Wind.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
The BELSAR dataset: Mono- and bistatic full-pol L-band SAR for agriculture and hydrology
Authors:
Jean Bouchat,
Emma Tronquo,
Anne Orban,
Karlus A. C. de Macedo,
Niko E. C. Verhoest,
Pierre Defourny
Abstract:
The BELSAR dataset is a unique collection of high-resolution airborne mono- and bistatic fully-polarimetric synthetic aperture radar (SAR) data in L-band, alongside concurrent measurements of vegetation and soil bio-geophysical variables measured in maize and winter wheat fields during the summer of 2018 in Belgium. This innovative dataset, the collection of which was funded by the European Space…
▽ More
The BELSAR dataset is a unique collection of high-resolution airborne mono- and bistatic fully-polarimetric synthetic aperture radar (SAR) data in L-band, alongside concurrent measurements of vegetation and soil bio-geophysical variables measured in maize and winter wheat fields during the summer of 2018 in Belgium. This innovative dataset, the collection of which was funded by the European Space Agency (ESA), helps addressing the lack of publicly-accessible experimental datasets combining multistatic SAR and in situ measurements. As such, it offers an opportunity to advance the development of SAR remote sensing science and applications for agricultural monitoring and hydrology. This paper aims to facilitate its adoption and exploration by offering comprehensive documentation and integrating its multiple data sources into a unified, analysis-ready dataset.
△ Less
Submitted 12 September, 2023;
originally announced October 2023.
-
Graph Theory Applications in Advanced Geospatial Research
Authors:
Surajit Ghosh,
Archita Mallick,
Anuva Chowdhury,
Kounik De Sarkar
Abstract:
Geospatial sciences include a wide range of applications, from environmental monitoring transportation to infrastructure planning, as well as location-based analysis and services. Graph theory algorithms in mathematics have emerged as indispensable tools in these domains due to their capability to model and analyse spatial relationships efficiently. This article explores the applications of graph…
▽ More
Geospatial sciences include a wide range of applications, from environmental monitoring transportation to infrastructure planning, as well as location-based analysis and services. Graph theory algorithms in mathematics have emerged as indispensable tools in these domains due to their capability to model and analyse spatial relationships efficiently. This article explores the applications of graph theory algorithms in geospatial sciences, highlighting their role in network analysis, spatial connectivity, geographic information systems, and various other spatial problem-solving scenarios like digital twin. The article provides a comprehensive idea about graph theory's key concepts and algorithms that assist the geospatial modelling processes and insights into real-world geospatial challenges and opportunities. It lists the extensive research, innovative technologies and methodologies implemented in this domain.
△ Less
Submitted 9 October, 2023; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Calibration and Physics with ARA Station 1: A Unique Askaryan Radio Array Detector
Authors:
M. F. H Seikh,
D. Z. Besson,
S. Ali,
P. Allison,
S. Archambault,
J. J. Beatty,
A. Bishop,
P. Chen,
Y. C. Chen,
B. A. Clark,
W. Clay,
A. Connolly,
K. Couberly,
L. Cremonesi,
A. Cummings,
P. Dasgupta,
R. Debolt,
S. De Kockere,
K. D. de Vries,
C. Deaconu,
M. A. DuVernois,
J. Flaherty,
E. Friedman,
R. Gaior,
P. Giri
, et al. (48 additional authors not shown)
Abstract:
The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers…
▽ More
The Askaryan Radio Array Station 1 (A1), the first among five autonomous stations deployed for the ARA experiment at the South Pole, is a unique ultra-high energy neutrino (UHEN) detector based on the Askaryan effect that uses Antarctic ice as the detector medium. Its 16 radio antennas (distributed across 4 strings, each with 2 Vertically Polarized (VPol), 2 Horizontally Polarized (HPol) receivers), and 2 strings of transmitting antennas (calibration pulsers, CPs), each with 1 VPol and 1 HPol channel, are deployed at depths less than 100 m within the shallow firn zone of the 2.8 km thick South Pole (SP) ice. We apply different methods to calibrate its Ice Ray Sampler second generation (IRS2) chip for timing offset and ADC-to-Voltage conversion factors using a known continuous wave input signal to the digitizer, and achieve a precision of sub-nanoseconds. We achieve better calibration for odd, compared to even samples, and also find that the HPols under-perform relative to the VPol channels. Our timing calibrated data is subsequently used to calibrate the ADC-to-Voltage conversion as well as precise antenna locations, as a precursor to vertex reconstruction. The calibrated data will then be analyzed for UHEN signals in the final step of data compression. The ability of A1 to scan the firn region of SP ice sheet will contribute greatly towards a 5-station analysis and will inform the design of the planned IceCube Gen-2 radio array.
△ Less
Submitted 14 August, 2023;
originally announced August 2023.
-
Virtual histological staining of unlabeled autopsy tissue
Authors:
Yuzhu Li,
Nir Pillar,
**gxi Li,
Tairan Liu,
Di Wu,
Songyu Sun,
Guangdong Ma,
Kevin de Haan,
Luzhe Huang,
Sepehr Hamidi,
Anatoly Urisman,
Tal Keidar Haran,
William Dean Wallace,
Jonathan E. Zuckerman,
Aydogan Ozcan
Abstract:
Histological examination is a crucial step in an autopsy; however, the traditional histochemical staining of post-mortem samples faces multiple challenges, including the inferior staining quality due to autolysis caused by delayed fixation of cadaver tissue, as well as the resource-intensive nature of chemical staining procedures covering large tissue areas, which demand substantial labor, cost, a…
▽ More
Histological examination is a crucial step in an autopsy; however, the traditional histochemical staining of post-mortem samples faces multiple challenges, including the inferior staining quality due to autolysis caused by delayed fixation of cadaver tissue, as well as the resource-intensive nature of chemical staining procedures covering large tissue areas, which demand substantial labor, cost, and time. These challenges can become more pronounced during global health crises when the availability of histopathology services is limited, resulting in further delays in tissue fixation and more severe staining artifacts. Here, we report the first demonstration of virtual staining of autopsy tissue and show that a trained neural network can rapidly transform autofluorescence images of label-free autopsy tissue sections into brightfield equivalent images that match hematoxylin and eosin (H&E) stained versions of the same samples, eliminating autolysis-induced severe staining artifacts inherent in traditional histochemical staining of autopsied tissue. Our virtual H&E model was trained using >0.7 TB of image data and a data-efficient collaboration scheme that integrates the virtual staining network with an image registration network. The trained model effectively accentuated nuclear, cytoplasmic and extracellular features in new autopsy tissue samples that experienced severe autolysis, such as COVID-19 samples never seen before, where the traditional histochemical staining failed to provide consistent staining quality. This virtual autopsy staining technique can also be extended to necrotic tissue, and can rapidly and cost-effectively generate artifact-free H&E stains despite severe autolysis and cell death, also reducing labor, cost and infrastructure requirements associated with the standard histochemical staining.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Enhancing Gravity Currents Analysis through Physics-Informed Neural Networks: Insights from Experimental Observations
Authors:
Mickaël Delcey,
Yoann Cheny,
Jean Schneider,
Simon Becker,
Yvan Dossmann,
Sébastien Kiesgen De Richter
Abstract:
Gravity currents in oceanic flows require simultaneous measurements of pressure and velocity to assess energy flux, which is crucial for predicting fluid circulation, mixing, and overall energy budget. In this paper, we apply Physics Informed Neural Networks (PINNs) to infer velocity and pressure field from Light Attenuation Technique (LAT) measurements for gravity current induced by lock-exchange…
▽ More
Gravity currents in oceanic flows require simultaneous measurements of pressure and velocity to assess energy flux, which is crucial for predicting fluid circulation, mixing, and overall energy budget. In this paper, we apply Physics Informed Neural Networks (PINNs) to infer velocity and pressure field from Light Attenuation Technique (LAT) measurements for gravity current induced by lock-exchange. In a PINN model, physical laws are embedded in the loss function of a neural network, such that the model fits the training data but is also constrained to reduce the residuals of the governing equations. PINNs are able to solve ill-posed inverse problems training on sparse and noisy data, and therefore can be applied to real engineering applications. The noise robustness of PINNs and the model parameters are investigated in a 2 dimensions toy case on a lock-exchange configuration , employing synthetic data. Then we train a PINN with experimental LAT measurements and quantitatively compare the velocity fields inferred to PIV measurements performed simultaneously on the same experiment. Finally, we study the energy flux field $J=p \boldsymbol{u}$ derived from the model. The results state that accurate and useful quantities can be derived from a PINN model trained on real experimental data which is encouraging for a better description of gravity currents and improve models of ocean circulation.
△ Less
Submitted 17 September, 2023; v1 submitted 27 July, 2023;
originally announced July 2023.
-
Fast transport simulations with higher-fidelity surrogate models for ITER
Authors:
J. Citrin,
P. Trochim,
T. Goerler,
D. Pfau,
K. L. van de Plassche,
F. Jenko
Abstract:
A fast and accurate turbulence transport model based on quasilinear gyrokinetics is developed. The model consists of a set of neural networks trained on a bespoke quasilinear GENE dataset, with a saturation rule calibrated to dedicated nonlinear simulations. The resultant neural network is approximately eight orders of magnitude faster than the original GENE quasilinear calculations. ITER predicti…
▽ More
A fast and accurate turbulence transport model based on quasilinear gyrokinetics is developed. The model consists of a set of neural networks trained on a bespoke quasilinear GENE dataset, with a saturation rule calibrated to dedicated nonlinear simulations. The resultant neural network is approximately eight orders of magnitude faster than the original GENE quasilinear calculations. ITER predictions with the new model project a fusion gain in line with ITER targets. While the dataset is currently limited to the ITER baseline regime, this approach illustrates a pathway to develop reduced-order turbulence models both faster and more accurate than the current state-of-the-art.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Roadmap on Deep Learning for Microscopy
Authors:
Giovanni Volpe,
Carolina Wählby,
Lei Tian,
Michael Hecht,
Artur Yakimovich,
Kristina Monakhova,
Laura Waller,
Ivo F. Sbalzarini,
Christopher A. Metzler,
Mingyang Xie,
Kevin Zhang,
Isaac C. D. Lenton,
Halina Rubinsztein-Dunlop,
Daniel Brunner,
Bijie Bai,
Aydogan Ozcan,
Daniel Midtvedt,
Hao Wang,
Nataša Sladoje,
Joakim Lindblad,
Jason T. Smith,
Marien Ochoa,
Margarida Barroso,
Xavier Intes,
Tong Qiu
, et al. (50 additional authors not shown)
Abstract:
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the…
▽ More
Through digital imaging, microscopy has evolved from primarily being a means for visual observation of life at the micro- and nano-scale, to a quantitative tool with ever-increasing resolution and throughput. Artificial intelligence, deep neural networks, and machine learning are all niche terms describing computational methods that have gained a pivotal role in microscopy-based research over the past decade. This Roadmap is written collectively by prominent researchers and encompasses selected aspects of how machine learning is applied to microscopy image data, with the aim of gaining scientific knowledge by improved image quality, automated detection, segmentation, classification and tracking of objects, and efficient merging of information from multiple imaging modalities. We aim to give the reader an overview of the key developments and an understanding of possibilities and limitations of machine learning for microscopy. It will be of interest to a wide cross-disciplinary audience in the physical sciences and life sciences.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Io's Optical Aurorae in Jupiter's Shadow
Authors:
Carl Schmidt,
Mikhail Sharov,
Katherine de Kleer,
Nick Schneider,
Imke de Pater,
Phillip H. Phipps,
Albert Conrad,
Luke Moore,
Paul Withers,
John Spencer,
Jeff Morgenthaler,
Ilya Ilyin,
Klaus Strassmeier,
Christian Veillet,
John Hill,
Mike Brown
Abstract:
Decline and recovery timescales surrounding eclipse are indicative of the controlling physical processes in Io's atmosphere. Recent studies have established that the majority of Io's molecular atmosphere, SO2 and SO, condenses during its passage through Jupiter's shadow. The eclipse response of Io's atomic atmosphere is less certain, having been characterized solely by ultraviolet aurorae. Here we…
▽ More
Decline and recovery timescales surrounding eclipse are indicative of the controlling physical processes in Io's atmosphere. Recent studies have established that the majority of Io's molecular atmosphere, SO2 and SO, condenses during its passage through Jupiter's shadow. The eclipse response of Io's atomic atmosphere is less certain, having been characterized solely by ultraviolet aurorae. Here we explore the response of optical aurorae for the first time. We find oxygen to be indifferent to the changing illumination, with [O I] brightness merely tracking the plasma density at Io's position in the torus. In shadow, line ratios confirm sparse SO2 coverage relative to O, since their collisions would otherwise quench the emission. Io's sodium aurora mostly disappears in eclipse and e-folding timescales, for decline and recovery differ sharply: ~10 minutes at ingress and nearly 2 hr at egress. Only ion chemistry can produce such a disparity; Io's molecular ionosphere is weaker at egress due to rapid recombination. Interruption of a NaCl+ photochemical pathway best explains Na behavior surrounding eclipse, implying that the role of electron impact ionization is minor relative to photons. Auroral emission is also evident from potassium, confirming K as the major source of far red emissions seen with spacecraft imaging at Jupiter. In all cases, direct electron impact on atomic gas is sufficient to explain the brightness without invoking significant dissociative excitation of molecules. Surprisingly, the nonresponse of O and rapid depletion of Na is opposite the temporal behavior of their SO2 and NaCl parent molecules during Io's eclipse phase.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Collapsars as Sites of r-process Nucleosynthesis: Systematic Near-Infrared Follow-up of Type Ic-BL Supernovae
Authors:
Shreya Anand,
Jennifer Barnes,
Sheng Yang,
Mansi M. Kasliwal,
Michael W. Coughlin,
Jesper Sollerman,
Kishalay De,
Christoffer Fremling,
Alessandra Corsi,
Anna Y. Q. Ho,
Arvind Balasubramanian,
Conor Omand,
Gokul P. Srinivasaragavan,
S. Bradley Cenko,
Tomas Ahumada,
Igor Andreoni,
Aishwarya Dahiwale,
Kaustav Kashyap Das,
Jacob Jencson,
Viraj Karambelkar,
Harsh Kumar,
Brian D. Metzger,
Daniel Perley,
Nikhil Sarin,
Tassilo Schweyer
, et al. (19 additional authors not shown)
Abstract:
One of the open questions following the discovery of GW170817 is whether neutron star mergers are the only astrophysical sites capable of producing $r$-process elements. Simulations have shown that 0.01-0.1M$_\odot$ of $r$-process material could be generated in the outflows originating from the accretion disk surrounding the rapidly rotating black hole that forms as a remnant to both neutron star…
▽ More
One of the open questions following the discovery of GW170817 is whether neutron star mergers are the only astrophysical sites capable of producing $r$-process elements. Simulations have shown that 0.01-0.1M$_\odot$ of $r$-process material could be generated in the outflows originating from the accretion disk surrounding the rapidly rotating black hole that forms as a remnant to both neutron star mergers and collapsing massive stars associated with long-duration gamma-ray bursts (collapsars). The hallmark signature of $r$-process nucleosynthesis in the binary neutron star merger GW170817 was its long-lasting near-infrared emission, thus motivating a systematic photometric study of the light curves of broadlined stripped-envelope (Ic-BL) supernovae (SNe) associated with collapsars. We present the first systematic study of 25 SNe Ic-BL -- including 18 observed with the Zwicky Transient Facility and 7 from the literature -- in the optical/near-infrared bands to determine what quantity of $r$-process material, if any, is synthesized in these explosions. Using semi-analytic models designed to account for $r$-process production in SNe Ic-BL, we perform light curve fitting to derive constraints on the $r$-process mass for these SNe. We also perform independent light curve fits to models without $r$-process. We find that the $r$-process-free models are a better fit to the light curves of the objects in our sample. Thus we find no compelling evidence of $r$-process enrichment in any of our objects. Further high-cadence infrared photometric studies and nebular spectroscopic analysis would be sensitive to smaller quantities of $r$-process ejecta mass or indicate whether all collapsars are completely devoid of $r$-process nucleosynthesis.
△ Less
Submitted 12 February, 2024; v1 submitted 17 February, 2023;
originally announced February 2023.
-
Argon milling induced decoherence mechanisms in superconducting quantum circuits
Authors:
J. Van Damme,
Ts. Ivanov,
P. Favia,
T. Conard,
J. Verjauw,
R. Acharya,
D. Perez Lozano,
B. Raes,
J. Van de Vondel,
A. M. Vadiraj,
M. Mongillo,
D. Wan,
J. De Boeck,
A. Potočnik,
K. De Greve
Abstract:
The fabrication of superconducting circuits requires multiple deposition, etch and cleaning steps, each possibly introducing material property changes and microscopic defects. In this work, we specifically investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find…
▽ More
The fabrication of superconducting circuits requires multiple deposition, etch and cleaning steps, each possibly introducing material property changes and microscopic defects. In this work, we specifically investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find that niobium microwave resonators exhibit an order of magnitude decrease in quality-factors after surface argon milling, while aluminum resonators are resilient to the same process. Extensive analysis of the niobium surface shows no change in the suboxide composition due to argon milling, while two-tone spectroscopy measurements reveal an increase in two-level system electrical dipole moments, indicating a structurally altered niobium oxide hosting larger two-level system defects. However, a short dry etch can fully recover the argon milling induced losses on niobium, offering a potential route towards state-of-the-art overlap Josephson junction qubits with niobium circuitry.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Long distance magnon transport in the van der Waals antiferromagnet CrPS$_4$
Authors:
Dennis K. de Wal,
Arnaud Iwens,
Tian Liu,
** Tang,
Gerrit E. W. Bauer,
Bart J. van Wees
Abstract:
We demonstrate the potential of van der Waals magnets for spintronic applications by reporting long-distance magnon spin transport in the electrically insulating antiferromagnet chromium thiophosphate (CrPS$_4$) with perpendicular magnetic anisotropy. We inject and detect magnon spins non-locally by Pt contacts and monitor the non-local resistance as a function of an in-plane magnetic field up to…
▽ More
We demonstrate the potential of van der Waals magnets for spintronic applications by reporting long-distance magnon spin transport in the electrically insulating antiferromagnet chromium thiophosphate (CrPS$_4$) with perpendicular magnetic anisotropy. We inject and detect magnon spins non-locally by Pt contacts and monitor the non-local resistance as a function of an in-plane magnetic field up to 7 Tesla. We observe a non-local resistance over distances up to at least a micron below the Neel temperature (T$_{\rm N}$ = 38 Kelvin) close to magnetic field strengths that saturate the sublattice magnetizations.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
Radiofrequency Ice Dielectric Measurements at Summit Station, Greenland
Authors:
J. A. Aguilar,
P. Allison,
D. Besson,
A. Bishop,
O. Botner,
S. Bouma,
S. Buitink,
M. Cataldo,
B. A. Clark,
K. Couberly,
Z. Curtis-Ginsberg,
P. Dasgupta,
S. de Kockere,
K. D. de Vries,
C. Deaconu,
M. A. DuVernois,
A. Eimer,
C. Glaser,
A. Hallgren,
S. Hallmann,
J. C. Hanson,
B. Hendricks,
J. Henrichs,
N. Heyer,
C. Hornhuber
, et al. (43 additional authors not shown)
Abstract:
We recently reported on the radio-frequency attenuation length of cold polar ice at Summit Station, Greenland, based on bistatic radar measurements of radio-frequency bedrock echo strengths taken during the summer of 2021. Those data also include echoes attributed to stratified impurities or dielectric discontinuities within the ice sheet (layers), which allow studies of a) estimation of the relat…
▽ More
We recently reported on the radio-frequency attenuation length of cold polar ice at Summit Station, Greenland, based on bistatic radar measurements of radio-frequency bedrock echo strengths taken during the summer of 2021. Those data also include echoes attributed to stratified impurities or dielectric discontinuities within the ice sheet (layers), which allow studies of a) estimation of the relative contribution of coherent (discrete layers, e.g.) vs. incoherent (bulk volumetric, e.g.) scattering, b) the magnitude of internal layer reflection coefficients, c) limits on the azimuthal asymmetry of reflections (birefringence), and d) limits on signal dispersion in-ice over a bandwidth of ~100 MHz. We find that i) after averaging 10000 echo triggers, reflected signal observable over the thermal floor (to depths of approximately 1500 m) are consistent with being entirely coherent, ii) internal layer reflection coefficients are measured at approximately -60 to -70 dB, iii) birefringent effects for vertically propagating signals are smaller by an order of magnitude relative to comparable studies performed at South Pole, and iv) within our experimental limits, glacial ice is non-dispersive over the frequency band relevant for neutrino detection experiments.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Manufacturing high-Q superconducting α-tantalum resonators on silicon wafers
Authors:
D. P. Lozano,
M. Mongillo,
X. Piao,
S. Couet,
D. Wan,
Y. Canvel,
A. M. Vadiraj,
Ts. Ivanov,
J. Verjauw,
R. Acharya,
J. Van Damme,
F. A. Mohiyaddin,
J. Jussot,
P. P. Gowda,
A. Pacco,
B. Raes,
J. Van de Vondel,
I. P. Radu,
B. Govoreanu,
J. Swerts,
A. Potočnik,
K. De Greve
Abstract:
The performance of state-of-the-art superconducting quantum devices is currently limited by microwave dielectric losses at different surfaces and interfaces. α-tantalum is a superconductor that has proven effective in reducing dielectric loss and improving device performance due to its thin low-loss oxide. However, without the use of a seed layer, this tantalum phase has so far only been realised…
▽ More
The performance of state-of-the-art superconducting quantum devices is currently limited by microwave dielectric losses at different surfaces and interfaces. α-tantalum is a superconductor that has proven effective in reducing dielectric loss and improving device performance due to its thin low-loss oxide. However, without the use of a seed layer, this tantalum phase has so far only been realised on sapphire substrates, which is incompatible with advanced processing in industry-scale fabrication facilities. Here, we demonstrate the fabrication of high-quality factor α-tantalum resonators directly on silicon wafers over a variety of metal deposition conditions and perform a comprehensive material and electrical characterization study. By comparing experiments with simulated resonator loss, we demonstrate that two-level-system loss is dominated by surface oxide contributions and not the substrate-metal interface. Our study paves the way to large scale manufacturing of low-loss superconducting circuits and to materials-driven advancements in superconducting circuit performance.
△ Less
Submitted 30 November, 2022; v1 submitted 29 November, 2022;
originally announced November 2022.
-
Physics-informed neural networks for gravity currents reconstruction from limited data
Authors:
Mickaël Delcey,
Yoann Cheny,
Sébastien Kiesgen de Richter
Abstract:
The present work investigates the use of physics-informed neural networks (PINNs) for the 3D reconstruction of unsteady gravity currents from limited data. In the PINN context, the flow fields are reconstructed by training a neural network whose objective function penalizes the mismatch between the network predictions and the observed data and embeds the underlying equations using automatic differ…
▽ More
The present work investigates the use of physics-informed neural networks (PINNs) for the 3D reconstruction of unsteady gravity currents from limited data. In the PINN context, the flow fields are reconstructed by training a neural network whose objective function penalizes the mismatch between the network predictions and the observed data and embeds the underlying equations using automatic differentiation. This study relies on a high-fidelity numerical experiment of the canonical lock-exchange configuration. This allows us to benchmark quantitatively the PINNs reconstruction capabilities on several training databases that mimic state-of-the-art experimental measurement techniques for density and velocity. Notably, spatially averaged density measurements by light attenuation technique (LAT) are employed for the training procedure. An optimal experimental setup for flow reconstruction by PINNs is proposed according to two criteria : the implementation complexity and the accuracy of the inferred fields.
△ Less
Submitted 14 June, 2023; v1 submitted 3 November, 2022;
originally announced November 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Overcoming I/O bottleneck in superconducting quantum computing: multiplexed qubit control with ultra-low-power, base-temperature cryo-CMOS multiplexer
Authors:
Rohith Acharya,
Steven Brebels,
Alexander Grill,
Jeroen Verjauw,
Tsvetan Ivanov,
Daniel Perez Lozano,
Danny Wan,
Jacques van Damme,
A. M. Vadiraj,
Massimo Mongillo,
Bogdan Govoreanu,
Jan Craninckx,
I. P. Radu,
Kristiaan de Greve,
Georges Gielen,
Francky Catthoor,
Anton Potočnik
Abstract:
Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-…
▽ More
Large-scale superconducting quantum computing systems entail high-fidelity control and readout of large numbers of qubits at millikelvin temperatures, resulting in a massive input-output bottleneck. Cryo-electronics, based on complementary metal-oxide-semiconductor (CMOS) technology, may offer a scalable and versatile solution to overcome this bottleneck. However, detrimental effects due to cross-coupling between the electronic and thermal noise generated during cryo-electronics operation and the qubits need to be avoided. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK that allows for control and interfacing of superconducting qubits with minimal cross-coupling. We benchmark its performance by interfacing it with a superconducting qubit and observe that the qubit's relaxation times ($T_1$) are unaffected, while the coherence times ($T_2$) are only minimally affected in both static and dynamic operation. Using the multiplexer, single qubit gate fidelities above 99.9%, i.e., well above the threshold for surface-code based quantum error-correction, can be achieved with appropriate thermal filtering. In addition, we demonstrate the capability of time-division-multiplexed qubit control by dynamically windowing calibrated qubit control pulses. Our results show that cryo-CMOS multiplexers could be used to significantly reduce the wiring resources for large-scale qubit device characterization, large-scale quantum processor control and quantum error correction protocols.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Graph Neural Networks for Low-Energy Event Classification & Reconstruction in IceCube
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
N. Aggarwal,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker
, et al. (359 additional authors not shown)
Abstract:
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challen…
▽ More
IceCube, a cubic-kilometer array of optical sensors built to detect atmospheric and astrophysical neutrinos between 1 GeV and 1 PeV, is deployed 1.45 km to 2.45 km below the surface of the ice sheet at the South Pole. The classification and reconstruction of events from the in-ice detectors play a central role in the analysis of data from IceCube. Reconstructing and classifying events is a challenge due to the irregular detector geometry, inhomogeneous scattering and absorption of light in the ice and, below 100 GeV, the relatively low number of signal photons produced per event. To address this challenge, it is possible to represent IceCube events as point cloud graphs and use a Graph Neural Network (GNN) as the classification and reconstruction method. The GNN is capable of distinguishing neutrino events from cosmic-ray backgrounds, classifying different neutrino event types, and reconstructing the deposited energy, direction and interaction vertex. Based on simulation, we provide a comparison in the 1-100 GeV energy range to the current state-of-the-art maximum likelihood techniques used in current IceCube analyses, including the effects of known systematic uncertainties. For neutrino event classification, the GNN increases the signal efficiency by 18% at a fixed false positive rate (FPR), compared to current IceCube methods. Alternatively, the GNN offers a reduction of the FPR by over a factor 8 (to below half a percent) at a fixed signal efficiency. For the reconstruction of energy, direction, and interaction vertex, the resolution improves by an average of 13%-20% compared to current maximum likelihood techniques in the energy range of 1-30 GeV. The GNN, when run on a GPU, is capable of processing IceCube events at a rate nearly double of the median IceCube trigger rate of 2.7 kHz, which opens the possibility of using low energy neutrinos in online searches for transient events.
△ Less
Submitted 11 October, 2022; v1 submitted 7 September, 2022;
originally announced September 2022.
-
Virtual stain transfer in histology via cascaded deep neural networks
Authors:
Xilin Yang,
Bijie Bai,
Yijie Zhang,
Yuzhu Li,
Kevin de Haan,
Tairan Liu,
Aydogan Ozcan
Abstract:
Pathological diagnosis relies on the visual inspection of histologically stained thin tissue specimens, where different types of stains are applied to bring contrast to and highlight various desired histological features. However, the destructive histochemical staining procedures are usually irreversible, making it very difficult to obtain multiple stains on the same tissue section. Here, we demon…
▽ More
Pathological diagnosis relies on the visual inspection of histologically stained thin tissue specimens, where different types of stains are applied to bring contrast to and highlight various desired histological features. However, the destructive histochemical staining procedures are usually irreversible, making it very difficult to obtain multiple stains on the same tissue section. Here, we demonstrate a virtual stain transfer framework via a cascaded deep neural network (C-DNN) to digitally transform hematoxylin and eosin (H&E) stained tissue images into other types of histological stains. Unlike a single neural network structure which only takes one stain type as input to digitally output images of another stain type, C-DNN first uses virtual staining to transform autofluorescence microscopy images into H&E and then performs stain transfer from H&E to the domain of the other stain in a cascaded manner. This cascaded structure in the training phase allows the model to directly exploit histochemically stained image data on both H&E and the target special stain of interest. This advantage alleviates the challenge of paired data acquisition and improves the image quality and color accuracy of the virtual stain transfer from H&E to another stain. We validated the superior performance of this C-DNN approach using kidney needle core biopsy tissue sections and successfully transferred the H&E-stained tissue images into virtual PAS (periodic acid-Schiff) stain. This method provides high-quality virtual images of special stains using existing, histochemically stained slides and creates new opportunities in digital pathology by performing highly accurate stain-to-stain transformations.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
B. Ali-Mohammadzadeh,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo
, et al. (1203 additional authors not shown)
Abstract:
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char…
▽ More
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.
△ Less
Submitted 17 July, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Space-resolved Chemical Information from Infrared Extinction Spectra
Authors:
Kalpa de Silva,
Proity Akbar,
Reinhold Blümel
Abstract:
Based on the classical Lorentz model of the index of refraction, a new method is presented for the extraction of the complex index of refraction from the extinction efficiency of homogeneous and layered dielectric spheres that simultaneously removes scattering effects and corrects measured extinction spectra for baseline shifts, tilts, curvature, and scaling. No reference spectrum is required and…
▽ More
Based on the classical Lorentz model of the index of refraction, a new method is presented for the extraction of the complex index of refraction from the extinction efficiency of homogeneous and layered dielectric spheres that simultaneously removes scattering effects and corrects measured extinction spectra for baseline shifts, tilts, curvature, and scaling. No reference spectrum is required and the method automatically satisfies the Kramers-Kronig relations. Thus, the method yields pure absorbance spectra for unambiguous interpretation of the chemical information of the sample. In the case of homogeneous spheres, the method also determines the radius of the sphere. In the case of layered spheres, the method determines the radii of the layers and the substances within each layer. Only a single-element detector is required. Using simulated $Q_{ext}$ data of polymethyl-methacrylate (PMMA) and polystyrene homogeneous and layered spheres we show that our reconstruction algorithm is reliable and accurately extracts pure absorbance spectra from $Q_{ext}$ data. Reconstructing the pure absorbance spectrum from a published, experimentally measured raw absorbance spectrum shows that our method also works for uncorrected spectra, reliably removes scattering effects and, given shape information, simultaneously corrects for spectral distortions.
△ Less
Submitted 25 June, 2022;
originally announced June 2022.
-
Immuno-Histo X-ray Phase Contrast Tomography: New 3D imaging technique for molecular tomography
Authors:
A. Quarta,
A. Sanna,
N. Pieroni,
B. Parodi,
F. Palermo,
I. Bukreeva,
M. Fratini,
L. Massimi,
D. Simeone,
X. Le Guével,
A. Bravin,
I. Viola,
E. Quintiero,
G. Gigli,
N. Kerlero de Rosbo,
L. Sancey,
A. Cedola
Abstract:
The still unmet ability of following the fate of specific cells or molecules within the whole body would give an outstanding breakthrough in the comprehension of disease mechanisms and in the monitoring of therapeutic approaches. Our idea is to push forward the bio-nanotechnology to a level where it serves the most advanced 3D bio-medical imaging to provide a multi-scale imaging ranging from the w…
▽ More
The still unmet ability of following the fate of specific cells or molecules within the whole body would give an outstanding breakthrough in the comprehension of disease mechanisms and in the monitoring of therapeutic approaches. Our idea is to push forward the bio-nanotechnology to a level where it serves the most advanced 3D bio-medical imaging to provide a multi-scale imaging ranging from the whole organ down to the cellular level, enabling high-resolution visualization of disease-relevant cells within the whole disease-altered biological context. We present here the first proof-of-concept of a novel tomography procedure, Immuno-Histo-X-ray Phase Contrast Tomography (XPCT) that combines cutting-edge XPCT, which provides detailed image of the whole organ, with molecular imaging at the cellular level, identifying the relevant cells via an immunohistochemistry-based approach. We combine metal nanoparticles and a single-domain antibody that target relevant cells. Our results lay the foundation for a new generation of 3D-bio-medical X-ray imaging.
△ Less
Submitted 6 June, 2023; v1 submitted 11 April, 2022;
originally announced April 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Low Energy Event Reconstruction in IceCube DeepCore
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
J. A. Aguilar,
M. Ahlers,
M. Ahrens,
J. M. Alameddine,
A. A. Alves Jr.,
N. M. Amin,
K. Andeen,
T. Anderson,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Axani,
X. Bai,
A. Balagopal V.,
S. W. Barwick,
B. Bastian,
V. Basu,
S. Baur,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus
, et al. (360 additional authors not shown)
Abstract:
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction o…
▽ More
The reconstruction of event-level information, such as the direction or energy of a neutrino interacting in IceCube DeepCore, is a crucial ingredient to many physics analyses. Algorithms to extract this high level information from the detector's raw data have been successfully developed and used for high energy events. In this work, we address unique challenges associated with the reconstruction of lower energy events in the range of a few to hundreds of GeV and present two separate, state-of-the-art algorithms. One algorithm focuses on the fast directional reconstruction of events based on unscattered light. The second algorithm is a likelihood-based multipurpose reconstruction offering superior resolutions, at the expense of larger computational cost.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
A Backside-Illuminated Charge-Focusing Silicon SPAD with Enhanced Near-Infrared Sensitivity
Authors:
Edward Van Sieleghem,
Gauri Karve,
Koen De Munck,
Andrea Vinci,
Celso Cavaco,
Andreas Süss,
Chris Van Hoof,
Jiwon Lee
Abstract:
A backside-illuminated (BSI) near-infrared enhanced silicon single-photon avalanche diode (SPAD) for time-of-flight (ToF) light detection and ranging applications is presented. The detector contains a 2 $μ$m wide multiplication region with a spherically-uniform electric field peak enforced by field-line crowding. A charge-focusing electric field extends into a 10 $μ$m deep absorption volume, where…
▽ More
A backside-illuminated (BSI) near-infrared enhanced silicon single-photon avalanche diode (SPAD) for time-of-flight (ToF) light detection and ranging applications is presented. The detector contains a 2 $μ$m wide multiplication region with a spherically-uniform electric field peak enforced by field-line crowding. A charge-focusing electric field extends into a 10 $μ$m deep absorption volume, whereby electrons generated in all corners of the device can move efficiently towards the multiplication region. The SPAD is integrated with a customized 130 nm CMOS technology and a dedicated BSI process. The device has a pitch of 15 $μ$m, which has the potential to be scaled down without significant performance loss. Furthermore, the detector achieves a photon detection efficiency of 27% at 905 nm, with an excess bias of 3.5 V that is controlled by integrated CMOS electronics, and a timing resolution of 240 ps. By virtue of these features, the device architecture is well-suited for large format ToF imaging arrays with integrated electronics.
△ Less
Submitted 3 March, 2022;
originally announced March 2022.
-
Quantification of 242Pu with a Microcalorimeter Gamma Spectrometer
Authors:
David J. Mercer,
Ryan Winkler,
Katrina E. Koehler,
Daniel T. Becker,
Douglas A. Bennett,
Matthew H. Carpenter,
Mark P. Croce,
Krystal I. de Castro,
Eric A. Feissle,
Joseph W. Fowler,
Johnathon D. Gard,
John A. B. Mates,
Daniel G. McNeel,
Nathan J. Ortiz,
Daniel Schmidt,
Katherine A. Schreiber,
Daniel S. Swetz,
Joel N. Ullom,
Leila R. Vale,
Sophie L. Weidenbenner,
Abigail L. Wessels
Abstract:
We report measurements of the 103-keV and 159-keV gamma ray signatures of 242Pu using microcalorimetry. This is the first observation of these gamma rays in a non-destructive measurement of an unprepared sample, and so represents an important advance in nuclear material accountancy. The measurement campaign also serves as the first demonstration of a field campaign with a portable microcalorimeter…
▽ More
We report measurements of the 103-keV and 159-keV gamma ray signatures of 242Pu using microcalorimetry. This is the first observation of these gamma rays in a non-destructive measurement of an unprepared sample, and so represents an important advance in nuclear material accountancy. The measurement campaign also serves as the first demonstration of a field campaign with a portable microcalorimeter gamma-ray spectrometer. For the 103-keV gamma ray we report an improved centroid energy and emission probability.
△ Less
Submitted 8 July, 2022; v1 submitted 6 February, 2022;
originally announced February 2022.
-
Mass transport via in-plane nanopores in graphene oxide membranes
Authors:
Tobias Foller,
Lukas Madauss,
Dali Ji,
Xiaojun Ren,
K. Kanishka H. De Silva,
Tiziana Musso Masamichi Yoshimura,
Henning Lebius,
Abdenacer Benyagoub,
Priyank Kumar,
Marika Schleberger,
Rakesh Joshi
Abstract:
Angstrom confined solvents in two-dimensional laminates travel through interlayer spacings, gaps between adjacent sheets, and via in plane pores. Among these, experimental access to investigate the mass transport through in plane pores is lacking. Here, we create these nanopores in graphene oxide membranes via ion irradiation with precise control over functional groups, pore size and pore density.…
▽ More
Angstrom confined solvents in two-dimensional laminates travel through interlayer spacings, gaps between adjacent sheets, and via in plane pores. Among these, experimental access to investigate the mass transport through in plane pores is lacking. Here, we create these nanopores in graphene oxide membranes via ion irradiation with precise control over functional groups, pore size and pore density. Low ion induced pore densities result in mild reduction and increased water permeation for the membranes. Higher pore densities lead to pronounced reduction and complete blockage of pure water however allows permeation of ethanol water mixture due to weakening of hydrogen network. We confirm with simulations, that the attraction of the solvents towards the pores with functional groups and disruption of the angstrom confined hydrogen network is crucial to allow in plane pore transport.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Computational fluid dynamic simulation of hull reservoir wave energy device
Authors:
V A U De Alwis,
A P K De Silva,
S D G S P Gunawardane,
Young-Ho Lee
Abstract:
This paper presents a Computational Fluid Dynamics (CFD) analysis of a wave energy device called the Hull Reservoir Wave Energy Converter (HRWEC). The device consists of a floating hull and a flap connected to the shaft of power take-off system (PTO), which is integral to the hull structure. It is unique due to its ability to convert wave energy by utilizing the pitch motion of the hull and rotati…
▽ More
This paper presents a Computational Fluid Dynamics (CFD) analysis of a wave energy device called the Hull Reservoir Wave Energy Converter (HRWEC). The device consists of a floating hull and a flap connected to the shaft of power take-off system (PTO), which is integral to the hull structure. It is unique due to its ability to convert wave energy by utilizing the pitch motion of the hull and rotating flap due to the internal water movement in the hull. Due to the complexity of the internal fluid dynamics, a CFD-based analysis was considered most appropriate. The CFD investigation of the dynamics of the device was done under regular wave conditions by using the ANSYS-AQWA and ANSYS FLUENT. Relative pitch angle variation, the hydrodynamic coefficients, which determine the degree of power extraction, were obtained from simulated results. A simulation was designed exhibiting complete system dynamics for different configurations varying on internal water height. Excellent convergence was observed,and an optimum configuration was identified. It is expected to validate the simulation results through experiments in the foreseeable future.
△ Less
Submitted 8 January, 2022; v1 submitted 2 January, 2022;
originally announced January 2022.
-
Microchannel cooling for the LHCb VELO Upgrade I
Authors:
Oscar Augusto De Aguiar Francisco,
Wiktor Byczynski,
Kazu Akiba,
Claudia Bertella,
Alexander Bitadze,
Matthew Brock,
Bartosz Bulat,
Guillaume Button,
Jan Buytaert,
Stefano De Capua,
Riccardo Callegari,
Christine Castellana,
Andrea Catinaccio,
Catherine Charrier,
Collette Charvet,
Victor Coco,
Paula Collins,
Jordan Degrange,
Raphael Dumps,
Diego Alvarez Feito,
Julian Freestone,
Mariusz Jedrychowski,
Vinicius Franco Lima,
Abraham Gallas,
Wouter Hulsbergen
, et al. (35 additional authors not shown)
Abstract:
The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures…
▽ More
The LHCb VELO Upgrade I, currently being installed for the 2022 start of LHC Run 3, uses silicon microchannel coolers with internally circulating bi-phase \cotwo for thermal control of hybrid pixel modules operating in vacuum. This is the largest scale application of this technology to date. Production of the microchannel coolers was completed in July 2019 and the assembly into cooling structures was completed in September 2021. This paper describes the R\&D path supporting the microchannel production and assembly and the motivation for the design choices. The microchannel coolers have excellent thermal peformance, low and uniform mass, no thermal expansion mismatch with the ASICs and are radiation hard. The fluidic and thermal performance is presented.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Label-free virtual HER2 immunohistochemical staining of breast tissue using deep learning
Authors:
Bijie Bai,
Hongda Wang,
Yuzhu Li,
Kevin de Haan,
Francesco Colonnese,
Yujie Wan,
**gyi Zuo,
Ngan B. Doan,
Xiaoran Zhang,
Yijie Zhang,
**gxi Li,
Wenjie Dong,
Morgan Angus Darrow,
Elham Kamangar,
Han Sung Lee,
Yair Rivenson,
Aydogan Ozcan
Abstract:
The immunohistochemical (IHC) staining of the human epidermal growth factor receptor 2 (HER2) biomarker is widely practiced in breast tissue analysis, preclinical studies and diagnostic decisions, guiding cancer treatment and investigation of pathogenesis. HER2 staining demands laborious tissue treatment and chemical processing performed by a histotechnologist, which typically takes one day to pre…
▽ More
The immunohistochemical (IHC) staining of the human epidermal growth factor receptor 2 (HER2) biomarker is widely practiced in breast tissue analysis, preclinical studies and diagnostic decisions, guiding cancer treatment and investigation of pathogenesis. HER2 staining demands laborious tissue treatment and chemical processing performed by a histotechnologist, which typically takes one day to prepare in a laboratory, increasing analysis time and associated costs. Here, we describe a deep learning-based virtual HER2 IHC staining method using a conditional generative adversarial network that is trained to rapidly transform autofluorescence microscopic images of unlabeled/label-free breast tissue sections into bright-field equivalent microscopic images, matching the standard HER2 IHC staining that is chemically performed on the same tissue sections. The efficacy of this virtual HER2 staining framework was demonstrated by quantitative analysis, in which three board-certified breast pathologists blindly graded the HER2 scores of virtually stained and immunohistochemically stained HER2 whole slide images (WSIs) to reveal that the HER2 scores determined by inspecting virtual IHC images are as accurate as their immunohistochemically stained counterparts. A second quantitative blinded study performed by the same diagnosticians further revealed that the virtually stained HER2 images exhibit a comparable staining quality in the level of nuclear detail, membrane clearness, and absence of staining artifacts with respect to their immunohistochemically stained counterparts. This virtual HER2 staining framework bypasses the costly, laborious, and time-consuming IHC staining procedures in laboratory, and can be extended to other types of biomarkers to accelerate the IHC tissue staining used in life sciences and biomedical workflow.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Two step clustering for data reduction combining DBSCAN and k-means clustering
Authors:
Bart J. J. Kremers,
Aaron Ho,
Jonathan Citrin,
Karel L. van de Plassche
Abstract:
A novel combination of two widely-used clustering algorithms is proposed here for the detection and reduction of high data density regions. The Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm is used for the detection of high data density regions and the k-means algorithm for reduction. The proposed algorithm iterates while successively decrementing the DBSCAN search…
▽ More
A novel combination of two widely-used clustering algorithms is proposed here for the detection and reduction of high data density regions. The Density Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm is used for the detection of high data density regions and the k-means algorithm for reduction. The proposed algorithm iterates while successively decrementing the DBSCAN search radius, allowing for an adaptive reduction factor based on the effective data density. The algorithm is demonstrated for a physics simulation application, where a surrogate model for fusion reactor plasma turbulence is generated with neural networks. A training dataset for the surrogate model is created with a quasilinear gyrokinetics code for turbulent transport calculations in fusion plasmas. The training set consists of model inputs derived from a repository of experimental measurements, meaning there is a potential risk of over-representing specific regions of this input parameter space. By applying the proposed reduction algorithm to this dataset, this study demonstrates that the training dataset can be reduced by a factor ~20 using the proposed algorithm, without a noticeable loss in the surrogate model accuracy. This reduction provides a novel way of analyzing existing high-dimensional datasets for biases and consequently reducing them, which lowers the cost of re-populating that parameter space with higher quality data.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
A Near-Infrared Enhanced Silicon Single-Photon Avalanche Diode with a Spherically Uniform Electric Field Peak
Authors:
Edward Van Sieleghem,
Andreas Süss,
Pierre Boulenc,
Jiwon Lee,
Gauri Karve,
Koen De Munck,
Celso Cavaco,
Chris Van Hoof
Abstract:
A near-infrared (NIR) enhanced silicon single-photon avalanche diode (SPAD) fabricated in a customized 0.13 $μ$m CMOS technology is presented. The SPAD has a depleted absorption volume of approximately 15 $μ$m x 15 $μ$m x 18 $μ$m. Electrons generated in the absorption region are efficiently transported by drift to a central active avalanche region with a diameter of 2 $μ$m. At the operating voltag…
▽ More
A near-infrared (NIR) enhanced silicon single-photon avalanche diode (SPAD) fabricated in a customized 0.13 $μ$m CMOS technology is presented. The SPAD has a depleted absorption volume of approximately 15 $μ$m x 15 $μ$m x 18 $μ$m. Electrons generated in the absorption region are efficiently transported by drift to a central active avalanche region with a diameter of 2 $μ$m. At the operating voltage, the active region contains a spherically uniform field peak, enabling the multiplication of electrons originating from all corners of the device. The advantages of the SPAD architecture include high NIR photon detection efficiency (PDE), drift-based transport, low afterpulsing, and compatibility with an integrated CMOS readout. A front-side illuminated device is fabricated and characterized. The SPAD has a PDE of 13% at wavelength 905 nm, an afterpulsing probability < 0.1% for a dead time of 13 ns, and a median dark count rate (DCR) of 840 Hz at room temperature. The device shows promising performance for time-of-flight applications that benefit from uniform NIR-sensitive SPAD arrays.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Neural network surrogate of QuaLiKiz using JET experimental data to populate training space
Authors:
Aaron Ho,
Jonathan Citrin,
Clarisse Bourdelle,
Yann Camenen,
Francis J. Casson,
Karel L. van de Plassche,
Henri Weisen,
JET Contributors
Abstract:
Within integrated tokamak plasma modelling, turbulent transport codes are typically the computational bottleneck limiting their routine use outside of post-discharge analysis. Neural network (NN) surrogates have been used to accelerate these calculations while retaining the desired accuracy of the physics-based models. This paper extends a previous NN model, known as QLKNN-hyper-10D, by incorporat…
▽ More
Within integrated tokamak plasma modelling, turbulent transport codes are typically the computational bottleneck limiting their routine use outside of post-discharge analysis. Neural network (NN) surrogates have been used to accelerate these calculations while retaining the desired accuracy of the physics-based models. This paper extends a previous NN model, known as QLKNN-hyper-10D, by incorporating the impact of impurities, plasma rotation and magnetic equilibrium effects. This is achieved by adding a light impurity fractional density ($n_{imp,light} / n_e$) and its normalized gradient, the normalized pressure gradient ($α$), the toroidal Mach number ($M_{tor}$) and the normalized toroidal flow velocity gradient. The input space was sampled based on experimental data from the JET tokamak to avoid the curse of dimensionality. The resulting networks, named QLKNN-jetexp-15D, show good agreement with the original QuaLiKiz model, both by comparing individual transport quantity predictions as well as comparing its impact within the integrated model, JINTRAC. The profile-averaged RMS of the integrated modelling simulations is <10% for each of the 5 scenarios tested. This is non-trivial given the potential numerical instabilities present within the highly nonlinear system of equations governing plasma transport, especially considering the novel addition of momentum flux predictions to the model proposed here. An evaluation of all 25 NN output quantities at one radial location takes $\sim$0.1 ms, $10^4$ times faster than the original QuaLiKiz model. Within the JINTRAC integrated modelling tests performed in this study, using QLKNN-jetexp-15D resulted in a speed increase of only 60 - 100 as other physics modules outside of turbulent transport become the bottleneck.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Lateral electrodeposition of MoS2 semiconductor over an insulator
Authors:
Nema Abdelazim,
Yasir J Noori,
Shibin Thomas,
Victoria K Greenacre,
Yisong Han,
Danielle E. Smith,
Giacomo Piana,
Nikolay Zhelev,
Andrew L. Hector,
Richard Beanland,
Gillian Reid,
Philip N Bartlett,
Kees de Groot
Abstract:
Develo** novel techniques for depositing transition metal dichalcogenides is crucial for the industrial adoption of 2D materials in optoelectronics. In this work, the lateral growth of molybdenum disulfide (MoS2) over an insulating surface is demonstrated using electrochemical deposition. By fabricating a new type of microelectrodes, MoS2 2D films grown from TiN electrodes across opposite sides…
▽ More
Develo** novel techniques for depositing transition metal dichalcogenides is crucial for the industrial adoption of 2D materials in optoelectronics. In this work, the lateral growth of molybdenum disulfide (MoS2) over an insulating surface is demonstrated using electrochemical deposition. By fabricating a new type of microelectrodes, MoS2 2D films grown from TiN electrodes across opposite sides have been connected over an insulating substrate, hence, forming a lateral device structure through only one lithography and deposition step. Using a variety of characterization techniques, the growth rate of MoS2 has been shown to be highly anisotropic with lateral to vertical growth ratios exceeding 20-fold. Electronic and photo-response measurements on the device structures demonstrate that the electrodeposited MoS2 layers behave like semiconductors, confirming their potential for photodetection applications. This lateral growth technique paves the way towards room temperature, scalable and site-selective production of various transition metal dichalcogenides and their lateral heterostructures for 2D materials-based fabricated devices.
△ Less
Submitted 26 November, 2021; v1 submitted 1 April, 2021;
originally announced April 2021.