-
Selective Undercut of Undoped Optical Membranes for Spin-Active Color Centers in 4H-SiC
Authors:
Jonathan R. Dietz,
Aaron M. Day,
Amberly Xie,
Evelyn L. Hu
Abstract:
Silicon carbide (SiC) is a semiconductor used in quantum information processing, microelectromechanical systems, photonics, power electronics, and harsh environment sensors. However, its high temperature stability, high breakdown voltage, wide bandgap, and high mechanical strength are accompanied by a chemical inertness which makes complex micromachining difficult. Photoelectrochemical etching is…
▽ More
Silicon carbide (SiC) is a semiconductor used in quantum information processing, microelectromechanical systems, photonics, power electronics, and harsh environment sensors. However, its high temperature stability, high breakdown voltage, wide bandgap, and high mechanical strength are accompanied by a chemical inertness which makes complex micromachining difficult. Photoelectrochemical etching is a simple, rapid means of wet processing SiC, including the use of dopant selective etch stops that take advantage of mature SiC homoepitaxy. However, dopant selective photoelectrochemical etching typically relies on highly doped material, which poses challenges for device applications such as quantum defects and photonics that benefit from low do** to produce robust emitter properties and high optical transparency. In this work, we develop a new, selective photoelectrochemical etching process that relies not on high do** but on the electrical depletion of a fabricated diode structure, allowing the selective etching of an n-doped substrate wafer versus an undoped epitaxial ($N_a=1(10)^{14}cm^{-3}$) device layer. We characterize the photo-response and photoelectrochemical etching behavior of the diode under bias and use those insights to suspend large ($>100μm^2$) undoped membranes of SiC. We further characterize the compatibility of membranes with quantum emitters, performing comparative spin spectroscopy between undoped and highly doped membrane structures, finding the use of undoped material improves ensemble spin lifetime by $>3x$. This work enables the fabrication of high-purity suspended thin films suitable for scalable photonics, mechanics, and quantum technologies in SiC.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Electrical Manipulation of Telecom Color Centers in Silicon
Authors:
Aaron M. Day,
Madison Sutula,
Jonathan R. Dietz,
Alexander Raun,
Denis D. Sukachev,
Mihir K. Bhaskar,
Evelyn L. Hu
Abstract:
Silicon color centers have recently emerged as promising candidates for commercial quantum technology, yet their interaction with electric fields has yet to be investigated. In this paper, we demonstrate electrical manipulation of telecom silicon color centers by fabricating lateral electrical diodes with an integrated G center ensemble in a commercial silicon on insulator wafer. The ensemble opti…
▽ More
Silicon color centers have recently emerged as promising candidates for commercial quantum technology, yet their interaction with electric fields has yet to be investigated. In this paper, we demonstrate electrical manipulation of telecom silicon color centers by fabricating lateral electrical diodes with an integrated G center ensemble in a commercial silicon on insulator wafer. The ensemble optical response is characterized under application of a reverse-biased DC electric field, observing both 100% modulation of fluorescence signal, and wavelength redshift of approximately 1.4 GHz/V above a threshold voltage. Finally, we use G center fluorescence to directly image the electric field distribution within the devices, obtaining insight into the spatial and voltage-dependent variation of the junction depletion region and the associated mediating effects on the ensemble. Strong correlation between emitter-field coupling and generated photocurrent is observed. Our demonstration enables electrical control and stabilization of semiconductor quantum emitters.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Deterministic Creation of Strained Color Centers in Nanostructures via High-Stress Thin Films
Authors:
Daniel R. Assumpcao,
Chang **,
Madison Sutula,
Sophie W. Ding,
Phong Pham,
Can M. Knaut,
Mihir K. Bhaskar,
Abishrant Panday,
Aaron M. Day,
Dylan Renaud,
Mikhail D. Lukin,
Evelyn Hu,
Bartholomeus Machielse,
Marko Loncar
Abstract:
Color centers have emerged as a leading qubit candidate for realizing hybrid spin-photon quantum information technology. One major limitation of the platform, however, is that the characteristics of individual color-centers are often strain dependent. As an illustrative case, the silicon-vacancy center in diamond typically requires millikelvin temperatures in order to achieve long coherence proper…
▽ More
Color centers have emerged as a leading qubit candidate for realizing hybrid spin-photon quantum information technology. One major limitation of the platform, however, is that the characteristics of individual color-centers are often strain dependent. As an illustrative case, the silicon-vacancy center in diamond typically requires millikelvin temperatures in order to achieve long coherence properties, but strained silicon vacancy centers have been shown to operate at temperatures beyond 1K without phonon-mediated decoherence. In this work we combine high-stress silicon nitride thin films with diamond nanostructures in order to reproducibly create statically strained silicon-vacancy color centers (mean ground state splitting of 608 GHz) with strain magnitudes of $\sim 4 \times 10^{-4}$. Based on modeling, this strain should be sufficient to allow for operation of a majority silicon-vacancy centers within the measured sample at elevated temperatures (1.5K) without any degradation of their spin properties. This method offers a scalable approach to fabricate high-temperature operation quantum memories. Beyond silicon-vacancy centers, this method is sufficiently general that it can be easily extended to other platforms as well.
△ Less
Submitted 4 November, 2023; v1 submitted 13 September, 2023;
originally announced September 2023.
-
Deterministic Laser Writing of Spin Defects in Nanophotonic Cavities
Authors:
Aaron M. Day,
Jonathan R. Dietz,
Madison Sutula,
Matthew Yeh,
Evelyn L. Hu
Abstract:
High-yield engineering and characterization of cavity-emitter coupling is an outstanding challenge in develo** scalable quantum network nodes. Ex-situ defect formation processes prevent real-time defect-cavity characterization, and previous in-situ methods require further processing to improve emitter properties or are limited to bulk substrates. We demonstrate direct laser-writing of cavity-int…
▽ More
High-yield engineering and characterization of cavity-emitter coupling is an outstanding challenge in develo** scalable quantum network nodes. Ex-situ defect formation processes prevent real-time defect-cavity characterization, and previous in-situ methods require further processing to improve emitter properties or are limited to bulk substrates. We demonstrate direct laser-writing of cavity-integrated spin defects using a nanosecond-pulsed above-bandgap laser. Photonic crystal cavities in 4H-silicon carbide serve as a nanoscope monitoring silicon monovacancy (V$_{Si}^-$) defect formation within the $100~\text{nm}^3$ cavity mode volume. We observe defect spin resonance, cavity-integrated photoluminescence and excited-state lifetimes consistent with conventional defect formation methods, without need for post-irradiation thermal annealing. We further find an exponential reduction in excited-state lifetime at fluences approaching the cavity amorphization threshold, and show single-shot local annealing of the intrinsic background defects at the V$_{Si}^-$ formation sites. This real-time in-situ method of localized defect formation, paired with demonstration of cavity-integrated defect spins, marks an important step in engineering cavity-emitter coupling for quantum networking.
△ Less
Submitted 5 October, 2022; v1 submitted 30 September, 2022;
originally announced October 2022.
-
Spin-Acoustic Control of Silicon Vacancies in 4H Silicon Carbide
Authors:
Jonathan R. Dietz,
Boyang Jiang,
Aaron M. Day,
Sunil A. Bhave,
Evelyn L. Hu
Abstract:
We demonstrate direct, acoustically mediated spin control of naturally occurring negatively charged silicon monovacancies (V$_{Si}^-$) in a high quality factor Lateral Overtone Bulk Acoustic Resonator fabricated out of high purity semi-insulating 4H-Silicon Carbide. We compare the frequency response of silicon monovacancies to a radio-frequency magnetic drive via optically-detected magnetic resona…
▽ More
We demonstrate direct, acoustically mediated spin control of naturally occurring negatively charged silicon monovacancies (V$_{Si}^-$) in a high quality factor Lateral Overtone Bulk Acoustic Resonator fabricated out of high purity semi-insulating 4H-Silicon Carbide. We compare the frequency response of silicon monovacancies to a radio-frequency magnetic drive via optically-detected magnetic resonance and the resonator's own radio-frequency acoustic drive via optically-detected spin acoustic resonance and observe a narrowing of the spin transition to nearly the linewidth of the driving acoustic resonance. We show that acoustic driving can be used at room temperature to induce coherent population oscillations. Spin acoustic resonance is then leveraged to perform stress metrology of the lateral overtone bulk acoustic resonator, showing for the first time the stress distribution inside a bulk acoustic wave resonator. Our work can be applied to the characterization of high quality-factor micro-electro-mechanical systems and has the potential to be extended to a mechanically addressable quantum memory.
△ Less
Submitted 30 May, 2022;
originally announced May 2022.
