-
Low Excess Noise, High Quantum Efficiency Avalanche Photodiodes for Beyond 2 μm Wavelength Detection
Authors:
Hyemin Jung,
Seunghyun Lee,
Xiao **,
Yifan Liu,
Theodore J. Ronningen,
Christoph H. Grein,
John P. R. David,
Sanjay Krishna
Abstract:
The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μm) range, covering wavelengths of CH4 (1.65 μm) and CO2 (2.05 μm). The state-of-the-art HgCdTe avalanche photodetect…
▽ More
The increasing concentration of greenhouse gases, notably CH4 and CO2, has fueled global temperature increases, intensifying concerns regarding the prevailing climate crisis. Effectively monitoring these gases demands a detector spanning the extended short-wavelength infrared (~2.4 μm) range, covering wavelengths of CH4 (1.65 μm) and CO2 (2.05 μm). The state-of-the-art HgCdTe avalanche photodetectors (APDs) offer exceptional performance metrics, including high gain (M) and low excess noise (F). However, their widespread adoption is hindered by inherent challenges such as manufacturability, reproducibility, and cost factors. Moreover, their reliance on cryogenic cooling adds to the cost, size, weight, and power of the system. We have demonstrated a linear mode APD combining an InGaAs/GaAsSb type-II superlattice absorber and an AlGaAsSb multiplier lattice matched to InP substrates. This APD has demonstrated a room temperature M of 178, a maximum measurable external quantum efficiency of 3560 % at 2 μm, an extremely low excess noise (F < 2 at M < 20), and a small temperature coefficient of breakdown (7.58 mV/K μm). Such a high performance APD with manufacturable semiconductor materials could lead to a rapid transition to a commercial III-V foundry, holding the promise of revolutionizing high-sensitivity receivers for greenhouse gas monitoring.
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Efficient Collective Action for Tackling Time-Critical Cybersecurity Threats
Authors:
Sébastien Gillard,
Dimitri Percia David,
Alain Mermoud,
Thomas Maillart
Abstract:
The latency reduction between the discovery of vulnerabilities, the build-up and dissemination of cyber-attacks has put significant pressure on cybersecurity professionals. For that, security researchers have increasingly resorted to collective action in order to reduce the time needed to characterize and tame outstanding threats. Here, we investigate how joining and contributions dynamics on MISP…
▽ More
The latency reduction between the discovery of vulnerabilities, the build-up and dissemination of cyber-attacks has put significant pressure on cybersecurity professionals. For that, security researchers have increasingly resorted to collective action in order to reduce the time needed to characterize and tame outstanding threats. Here, we investigate how joining and contributions dynamics on MISP, an open source threat intelligence sharing platform, influence the time needed to collectively complete threat descriptions. We find that performance, defined as the capacity to characterize quickly a threat event, is influenced by (i) its own complexity (negatively), by (ii) collective action (positively), and by (iii) learning, information integration and modularity (positively). Our results inform on how collective action can be organized at scale and in a modular way to overcome a large number of time-critical tasks, such as cybersecurity threats.
△ Less
Submitted 9 October, 2022; v1 submitted 30 June, 2022;
originally announced June 2022.
-
Constraints on future analysis metadata systems in High Energy Physics
Authors:
T. J. Khoo,
A. Reinsvold Hall,
N. Skidmore,
S. Alderweireldt,
J. Anders,
C. Burr,
W. Buttinger,
P. David,
L. Gouskos,
L. Gray,
S. Hageboeck,
A. Krasznahorkay,
P. Laycock,
A. Lister,
Z. Marshall,
A. B. Meyer,
T. Novak,
S. Rappoccio,
M. Ritter,
E. Rodrigues,
J. Rumsevicius,
L. Sexton-Kennedy,
N. Smith,
G. A. Stewart,
S. Wertz
Abstract:
In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool shoul…
▽ More
In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool should be easy to use by new analysers, should scale to large data volumes and diverse processing paradigms, and should enable future analysis reinterpretation. This document, which is the product of community discussions organised by the HEP Software Foundation, categorises types of metadata by scope and format and gives examples of current metadata solutions. Important design considerations for metadata systems, including sociological factors, analysis preservation efforts, and technical factors, are discussed. A list of best practices and technical requirements for future analysis metadata systems is presented. These best practices could guide the development of a future cross-experimental effort for analysis metadata tools.
△ Less
Submitted 19 May, 2022; v1 submitted 1 March, 2022;
originally announced March 2022.
-
Readable and efficient HEP data analysis with bamboo
Authors:
Pieter David
Abstract:
With the LHC continuing to collect more data and experimental analyses becoming increasingly complex, tools to efficiently develop and execute these analyses are essential. The bamboo framework defines a domain-specific language, embedded in python, that allows to concisely express the analysis logic in a functional style. The implementation based on ROOT's RDataFrame and cling C++ JIT compiler ap…
▽ More
With the LHC continuing to collect more data and experimental analyses becoming increasingly complex, tools to efficiently develop and execute these analyses are essential. The bamboo framework defines a domain-specific language, embedded in python, that allows to concisely express the analysis logic in a functional style. The implementation based on ROOT's RDataFrame and cling C++ JIT compiler approaches the performance of dedicated native code. Bamboo is currently being used for several CMS Run 2 analyses that rely on the NanoAOD data format, which will become more common in Run 3 and beyond, and for which many reusable components are included, but it provides many possibilities for customisation, which allow for straightforward adaptation to other formats and workflows
△ Less
Submitted 4 June, 2021; v1 submitted 28 February, 2021;
originally announced March 2021.
-
I-mode pedestal relaxation events at ASDEX Upgrade
Authors:
D. Silvagni,
T. Eich,
T. Happel,
G. F. Harrer,
M. Griener,
M. Dunne,
M. Cavedon,
M. Faitsch,
L. Gil,
D. Nille,
B. Tal,
R. Fischer,
U. Stroth,
D. Brida,
P. David,
P. Manz,
E. Viezzer,
the ASDEX Upgrade team,
the EUROfusion MST1 team
Abstract:
The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operation…
▽ More
The I-mode confinement regime can feature small edge temperature drops that can lead to an increase in the energy deposited onto the divertor targets. In this work, we show that these events are associated with a relaxation of both electron temperature and density edge profiles, with the largest drop found at the pedestal top position. Stability analysis of edge profiles reveals that the operational points are far from the ideal peeling-ballooning boundary. Also, we show that these events appear close to the H-mode transition in the typical I-mode operational space in ASDEX Upgrade, and that no further enhancement of energy confinement is found when they occur. Moreover, scrape-off layer transport during these events is found to be very similar to type-I ELMs, with regard to timescales ($\approx$ 800 $μ$s), filament propagation, toroidally asymmetric energy effluxes at the midplane and asymmetry between inner and outer divertor deposited energy. In particular, the latter reveals that more energy reaches the outer divertor target. Lastly, first measurements of the divertor peak energy fluence are reported, and projections to ARC - a reactor designed to operate in I-mode - are drawn.
△ Less
Submitted 19 June, 2020;
originally announced June 2020.
-
Spatially resolved determination of the electronic density and temperature by a visible spectrotomography diagnostic in a linear magnetized plasma
Authors:
V. Gonzalez-Fernandez,
P. David,
R. Baude,
A. Escarguel,
Y. Camenen
Abstract:
In this work, a non-intrusive, spatially resolved, spectro-tomographic optical diagnostic of the electronic density and temperature on the linear plasma column Mistral is presented. Coupling of spectroscopy and tomography technique gives access to the local plasma light emission at different wavelengths (visible and near IR) in an argon plasma. Taking advantage of the symmetry of the Mistral exper…
▽ More
In this work, a non-intrusive, spatially resolved, spectro-tomographic optical diagnostic of the electronic density and temperature on the linear plasma column Mistral is presented. Coupling of spectroscopy and tomography technique gives access to the local plasma light emission at different wavelengths (visible and near IR) in an argon plasma. Taking advantage of the symmetry of the Mistral experiment, the diagnostic results are validated and the plasma is found to correspond to a corona equilibrium state. With the use of another spectrometer and a Langmuir probe, we propose a non-intrusive method to determine the electronic density and temperature of each pixel of the tomographic images of the plasma. The obtained results are in good agreement with the Langmuir probe ones.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Liquid-Like Interfaces Mediate Structural Phase Transitions in Lead Halide Perovskites
Authors:
Connor G. Bischak,
Minliang Lai,
Dylan Lu,
Zhaochuan Fan,
Philippe David,
Dengpan Dong,
Hong Chen,
Ahmed S. Etman,
Teng Lei,
Junliang Sun,
Michael Grünwald,
David T. Limmer,
Peidong Yang,
Naomi S. Ginsberg
Abstract:
Microscopic pathways of structural phase transitions are difficult to probe because they occur over multiple, disparate time and length scales. Using $in$ $situ$ nanoscale cathodoluminescence microscopy, we visualize the thermally-driven transition to the perovskite phase in hundreds of non-perovskite phase nanowires, resolving the initial nanoscale nucleation and subsequent mesoscale growth and q…
▽ More
Microscopic pathways of structural phase transitions are difficult to probe because they occur over multiple, disparate time and length scales. Using $in$ $situ$ nanoscale cathodoluminescence microscopy, we visualize the thermally-driven transition to the perovskite phase in hundreds of non-perovskite phase nanowires, resolving the initial nanoscale nucleation and subsequent mesoscale growth and quantifying the activation energy for phase propagation. In combination with molecular dynamics computer simulations, we reveal that the transformation does not follow a simple martensitic mechanism, and proceeds via ion diffusion through a liquid-like interface between the two structures. While cations are disordered in this liquid-like region, the halide ions retain substantial spatial correlations. We find that the anisotropic crystal structure translates to faster nucleation of the perovskite phase at nanowire ends and faster growth along the long nanowire axis. These results represent a significant step towards manipulating structural phases at the nanoscale for designer materials properties.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
The camera of the fifth H.E.S.S. telescope. Part I: System description
Authors:
J. Bolmont,
P. Corona,
P. Gauron,
P. Ghislain,
C. Goffin,
L. Guevara Riveros,
J. -F. Huppert,
O. Martineau-Huynh,
P. Nayman,
J. -M. Parraud,
J. -P. Tavernet,
F. Toussenel,
D. Vincent,
P. Vincent,
W. Bertoli,
P. Espigat,
M. Punch,
D. Besin,
E. Delagnes,
J. -F. Glicenstein,
Y. Moudden,
P. Venault,
H. Zaghia,
L. Brunetti,
P. -Y. David
, et al. (32 additional authors not shown)
Abstract:
In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S. (High Energy Stereoscopic System) array reached their tenth year of operation in Khomas Highlands, Namibia, a fifth telescope took its first data as part of the system. This new Cherenkov detector, comprising a 614.5 m^2 reflector with a highly pixelized camera in its focal plane, improves the sensitivity of the current ar…
▽ More
In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S. (High Energy Stereoscopic System) array reached their tenth year of operation in Khomas Highlands, Namibia, a fifth telescope took its first data as part of the system. This new Cherenkov detector, comprising a 614.5 m^2 reflector with a highly pixelized camera in its focal plane, improves the sensitivity of the current array by a factor two and extends its energy domain down to a few tens of GeV.
The present part I of the paper gives a detailed description of the fifth H.E.S.S. telescope's camera, presenting the details of both the hardware and the software, emphasizing the main improvements as compared to previous H.E.S.S. camera technology.
△ Less
Submitted 26 May, 2014; v1 submitted 22 October, 2013;
originally announced October 2013.
-
Gravity-driven thin-film flow with negatively buoyant particles
Authors:
A. Mavromoustaki,
P. David,
S. Hill,
P. Latterman,
W. Rosenthal,
M. Mata,
A. L. Bertozzi
Abstract:
This arXiv article describes the fluid dynamics video on `Gravity-driven thin-film flow with negatively buoyant particles', presented at the 64th Annual Meeting of the APS Division of Fluid Dynamics in Baltimore, MD in November 2011. The video shows three different experiments where a thin film of silicone oil laden with particles, is allowed to flow down an incline under the action of gravity. Th…
▽ More
This arXiv article describes the fluid dynamics video on `Gravity-driven thin-film flow with negatively buoyant particles', presented at the 64th Annual Meeting of the APS Division of Fluid Dynamics in Baltimore, MD in November 2011. The video shows three different experiments where a thin film of silicone oil laden with particles, is allowed to flow down an incline under the action of gravity. The videos were recorded at the UCLA Applied Math Laboratory.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
Absolute luminosity measurements with the LHCb detector at the LHC
Authors:
The LHCb Collaboration,
R. Aaij,
B. Adeva,
M. Adinolfi,
C. Adrover,
A. Affolder,
Z. Ajaltouni,
J. Albrecht,
F. Alessio,
M. Alexander,
G. Alkhazov,
P. Alvarez Cartelle,
A. A. Alves Jr,
S. Amato,
Y. Amhis,
J. Anderson,
R. B. Appleby,
O. Aquines Gutierrez,
F. Archilli,
L. Arrabito,
A. Artamonov,
M. Artuso,
E. Aslanides,
G. Auriemma,
S. Bachmann
, et al. (549 additional authors not shown)
Abstract:
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-prot…
▽ More
Absolute luminosity measurements are of general interest for colliding-beam experiments at storage rings. These measurements are necessary to determine the absolute cross-sections of reaction processes and are valuable to quantify the performance of the accelerator. Using data taken in 2010, LHCb has applied two methods to determine the absolute scale of its luminosity measurements for proton-proton collisions at the LHC with a centre-of-mass energy of 7 TeV. In addition to the classic "van der Meer scan" method a novel technique has been developed which makes use of direct imaging of the individual beams using beam-gas and beam-beam interactions. This beam imaging method is made possible by the high resolution of the LHCb vertex detector and the close proximity of the detector to the beams, and allows beam parameters such as positions, angles and widths to be determined. The results of the two methods have comparable precision and are in good agreement. Combining the two methods, an overall precision of 3.5% in the absolute luminosity determination is reached. The techniques used to transport the absolute luminosity calibration to the full 2010 data-taking period are presented.
△ Less
Submitted 11 January, 2012; v1 submitted 13 October, 2011;
originally announced October 2011.
-
Design, fabrication and characterisation of InGaAs/InP single-photon avalanche diode detectors
Authors:
Ryan E. Warburton,
Sara Pellegrini,
Lionel Tan,
Jo Shien Ng,
Andrey Krysa,
Kris Groom,
John P. R. David,
Sergio Cova,
Gerald S. Buller
Abstract:
This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter.
This paper demonstrates the performance of planar geometry InGaAs/InP avalanche diodes, specifically designed and fabricated for Geiger-mode operation at wavelengths around 1550nm, in terms of dark count rate, single-photon detection efficiency, afterpulsing and photon-timing jitter.
△ Less
Submitted 8 May, 2006;
originally announced May 2006.
-
Nonlinear denoising of transient signals with application to event related potentials
Authors:
A. Effern,
K. Lehnertz,
T. Schreiber,
T. Grunwald,
P. David,
C. E. Elger
Abstract:
We present a new wavelet based method for the denoising of {\it event related potentials} ERPs), employing techniques recently developed for the paradigm of deterministic chaotic systems. The denoising scheme has been constructed to be appropriate for short and transient time sequences using circular state space embedding. Its effectiveness was successfully tested on simulated signals as well as…
▽ More
We present a new wavelet based method for the denoising of {\it event related potentials} ERPs), employing techniques recently developed for the paradigm of deterministic chaotic systems. The denoising scheme has been constructed to be appropriate for short and transient time sequences using circular state space embedding. Its effectiveness was successfully tested on simulated signals as well as on ERPs recorded from within a human brain. The method enables the study of individual ERPs against strong ongoing brain electrical activity.
△ Less
Submitted 28 January, 2000;
originally announced January 2000.