-
Comparison of Dielectric Loss in Titanium Nitride and Aluminum Superconducting Resonators
Authors:
Alexander Melville,
Greg Calusine,
Wayne Woods,
Kyle Serniak,
Evan Golden,
Bethany M. Niedzielski,
David K. Kim,
Arjan Sevi,
Jonilyn L. Yoder,
Eric A. Dauler,
William D. Oliver
Abstract:
Lossy dielectrics are a significant source of decoherence in superconducting quantum circuits. In this report, we model and compare the dielectric loss in bulk and interfacial dielectrics in titanium nitride (TiN) and aluminum (Al) superconducting coplanar waveguide (CPW) resonators. We fabricate isotropically trenched resonators to produce a series of device geometries that accentuate a specific…
▽ More
Lossy dielectrics are a significant source of decoherence in superconducting quantum circuits. In this report, we model and compare the dielectric loss in bulk and interfacial dielectrics in titanium nitride (TiN) and aluminum (Al) superconducting coplanar waveguide (CPW) resonators. We fabricate isotropically trenched resonators to produce a series of device geometries that accentuate a specific dielectric region's contribution to resonator quality factor. While each dielectric region contributes significantly to loss in TiN devices, the metal-air interface dominates the loss in the Al devices. Furthermore, we evaluate the quality factor of each TiN resonator geometry with and without a post-process hydrofluoric (HF) etch, and find that it reduced losses from the substrate-air interface, thereby improving the quality factor.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Analysis and mitigation of interface losses in trenched superconducting coplanar waveguide resonators
Authors:
Greg Calusine,
Alexander Melville,
Wayne Woods,
Rabindra Das,
Corey Stull,
Vlad Bolkhovsky,
Danielle Braje,
David Hover,
David K. Kim,
Xhovalin Miloshi,
Danna Rosenberg,
Arjan Sevi,
Jonilyn L. Yoder,
Eric A. Dauler,
William D. Oliver
Abstract:
Improving the performance of superconducting qubits and resonators generally results from a combination of materials and fabrication process improvements and design modifications that reduce device sensitivity to residual losses. One instance of this approach is to use trenching into the device substrate in combination with superconductors and dielectrics with low intrinsic losses to improve quali…
▽ More
Improving the performance of superconducting qubits and resonators generally results from a combination of materials and fabrication process improvements and design modifications that reduce device sensitivity to residual losses. One instance of this approach is to use trenching into the device substrate in combination with superconductors and dielectrics with low intrinsic losses to improve quality factors and coherence times. Here we demonstrate titanium nitride coplanar waveguide resonators with mean quality factors exceeding two million and controlled trenching reaching 2.2 $μ$m into the silicon substrate. Additionally, we measure sets of resonators with a range of sizes and trench depths and compare these results with finite-element simulations to demonstrate quantitative agreement with a model of interface dielectric loss. We then apply this analysis to determine the extent to which trenching can improve resonator performance.
△ Less
Submitted 28 September, 2017;
originally announced September 2017.
-
Heralding efficiency and correlated-mode coupling of near-IR fiber coupled photon pairs
Authors:
P. Ben Dixon,
Danna Rosenberg,
Veronika Stelmakh,
Matthew E. Grein,
Ryan S. Bennink,
Eric A. Dauler,
Andrew J. Kerman,
Richard J. Molnar,
Franco N. C. Wong
Abstract:
We report on a systematic experimental study of heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single mode optical fibers. We define the correlated-mode coupling efficiency--an inherent source efficiency--and explain its relation to heralding efficiency. For our experiment, we developed a reconfigura…
▽ More
We report on a systematic experimental study of heralding efficiency and generation rate of telecom-band infrared photon pairs generated by spontaneous parametric down-conversion and coupled to single mode optical fibers. We define the correlated-mode coupling efficiency--an inherent source efficiency--and explain its relation to heralding efficiency. For our experiment, we developed a reconfigurable computer controlled pump-beam and collection-mode optical apparatus which we used to measure the generation rate and correlated-mode coupling efficiency. The use of low-noise, high-efficiency superconducting nanowire single-photon detectors in this setup allowed us to explore focus configurations with low overall photon flux. The measured data agree well with theory and we demonstrated a correlated-mode coupling efficiency of $97 \pm 2\%$, which is the highest efficiency yet achieved for this type of system. These results confirm theoretical treatments and demonstrate that very high overall heralding efficiencies can, in principle, be achieved in quantum optical systems. It is expected that these results and techniques will be widely incorporated into future systems that require, or benefit from, a high heralding efficiency.
△ Less
Submitted 25 September, 2014; v1 submitted 31 July, 2014;
originally announced July 2014.
-
Readout of superconducting nanowire single-photon detectors at high count rates
Authors:
Andrew J. Kerman,
Danna Rosenberg,
Richard J. Molnar,
Eric A. Dauler
Abstract:
Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times $τ_R\lesssim$10 ns after a detection event. In this work, however, we identify in the conventional electrical readout scheme a nonlinear interaction between the detector and its readout which can m…
▽ More
Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times $τ_R\lesssim$10 ns after a detection event. In this work, however, we identify in the conventional electrical readout scheme a nonlinear interaction between the detector and its readout which can make stable, high-efficiency operation impossible at count rates even an order-of-magnitude less than $τ_R^{-1}$. We present detailed experimental confirmation of this, and a theoretical model which quantitatively explains our observations. Finally, we describe an improved readout which circumvents this problem, allowing these detectors to be operated stably at high count rates, with a detection efficiency penalty determined purely by their inductive reset time.
△ Less
Submitted 12 February, 2013;
originally announced February 2013.
-
Higher-order photon correlations in pulsed photonic crystal nanolasers
Authors:
David Elvira,
Xavier Hachair,
V. Verma,
Remy Braive,
Gregoire Beaudoin,
Isabelle Robert-Philip,
Isabelle Sagnes,
Burm Baek,
Sae Woo Nam,
Eric A. Dauler,
Izo Abram,
Martin J. Stevens,
Alexios Beveratos
Abstract:
We report on the higher-order photon correlations of a high-$β$ nanolaser under pulsed excitation at room temperature. Using a multiplexed four-element superconducting single photon detector we measured g$^{(n)}(\vec{0})$ with $n$=2,3,4. All orders of correlation display partially chaotic statistics, even at four times the threshold excitation power. We show that this departure from coherence and…
▽ More
We report on the higher-order photon correlations of a high-$β$ nanolaser under pulsed excitation at room temperature. Using a multiplexed four-element superconducting single photon detector we measured g$^{(n)}(\vec{0})$ with $n$=2,3,4. All orders of correlation display partially chaotic statistics, even at four times the threshold excitation power. We show that this departure from coherence and Poisson statistics is due to the quantum fluctuations associated with the small number of dipoles and photons involved in the lasing process.
△ Less
Submitted 7 June, 2011;
originally announced June 2011.
-
Electrothermal feedback in superconducting nanowire single-photon detectors
Authors:
Andrew J. Kerman,
Joel K. W. Yang,
Richard J. Molnar,
Eric A. Dauler,
Karl K. Berggren
Abstract:
We investigate the role of electrothermal feedback in the operation of superconducting nanowire single-photon detectors (SNSPDs). It is found that the desired mode of operation for SNSPDs is only achieved if this feedback is unstable, which happens naturally through the slow electrical response associated with their relatively large kinetic inductance. If this response is sped up in an effort to…
▽ More
We investigate the role of electrothermal feedback in the operation of superconducting nanowire single-photon detectors (SNSPDs). It is found that the desired mode of operation for SNSPDs is only achieved if this feedback is unstable, which happens naturally through the slow electrical response associated with their relatively large kinetic inductance. If this response is sped up in an effort to increase the device count rate, the electrothermal feedback becomes stable and results in an effect known as latching, where the device is locked in a resistive state and can no longer detect photons. We present a set of experiments which elucidate this effect, and a simple model which quantitatively explains the results.
△ Less
Submitted 1 December, 2008;
originally announced December 2008.
-
Optical Properties of Superconducting Nanowire Single-Photon Detectors
Authors:
Vikas Anant,
Andrew J. Kerman,
Eric A. Dauler,
Joel K. W. Yang,
Kristine M. Rosfjord,
Karl K. Berggren
Abstract:
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires…
▽ More
We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires that were five times more sensitive to parallel-polarized photons than perpendicular-polarized photons. We developed a numerical model that predicts the absorptance of our structures. We also used our measurements, coupled with measurements of device detection efficiencies, to determine the probability of photon detection after an absorption event. We found that, remarkably, absorbed parallel-polarized photons were more likely to result in detection events than perpendicular-polarized photons, and we present a hypothesis that qualitatively explains this result. Finally, we also determined the enhancement of device detection efficiency and absorptance due to the inclusion of an integrated optical cavity over a range of wavelengths (700-1700 nm) on a number of devices, and found good agreement with our numerical model.
△ Less
Submitted 19 June, 2008;
originally announced June 2008.
-
Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors
Authors:
Eric A. Dauler,
Andrew J. Kerman,
Bryan S. Robinson,
Joel K. W. Yang,
Boris Voronov,
Gregory Gol'tsman,
Scott A. Hamilton,
Karl K. Berggren
Abstract:
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterize the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% syst…
▽ More
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterize the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon-counting and quantum communication applications. The design, fabrication and testing of this detector are described, and a comparison between the measured and theoretical performance is presented.
△ Less
Submitted 15 May, 2008;
originally announced May 2008.
-
Constriction-limited detection efficiency of superconducting nanowire single-photon detectors
Authors:
Andrew J. Kerman,
Eric A. Dauler,
Joel K. W. Yang,
Kristine M. Rosfjord,
Vikas Anant,
Karl K. Berggren,
G. Gol'tsman,
B. Voronov
Abstract:
We investigate the source of large variations in the observed detection effiiencies of superconducting nanowire single-photon detectors between many nominally identical devices. Through both electrical and optical measurements, we infer that these variations arise from "constrictions:" highly localized regions of the nanowires where the effective cross-sectional area for superconducting current…
▽ More
We investigate the source of large variations in the observed detection effiiencies of superconducting nanowire single-photon detectors between many nominally identical devices. Through both electrical and optical measurements, we infer that these variations arise from "constrictions:" highly localized regions of the nanowires where the effective cross-sectional area for superconducting current is reduced. These constrictions limit the DC bias current density to well below its critical value over the remainder of the wire, and thus prevent the detection efficiency from reaching the high values that occur in these devices only when they are biased near the critical current density.
△ Less
Submitted 22 January, 2007; v1 submitted 27 November, 2006;
originally announced November 2006.
-
Kinetic-inductance-limited reset time of superconducting nanowire photon counters
Authors:
Andrew J. Kerman,
Eric A. Dauler,
William E. Keicher,
Joel K. W. Yang,
Karl K. Berggren,
G. Gol'tsman,
B. Voronov
Abstract:
We investigate the recovery of superconducting NbN-nanowire photon counters after detection of an optical pulse at a wavelength of 1550 nm, and present a model that quantitatively accounts for our observations. The reset time is found to be limited by the large kinetic inductance of these nanowires, which forces a tradeoff between counting rate and either detection efficiency or active area. Dev…
▽ More
We investigate the recovery of superconducting NbN-nanowire photon counters after detection of an optical pulse at a wavelength of 1550 nm, and present a model that quantitatively accounts for our observations. The reset time is found to be limited by the large kinetic inductance of these nanowires, which forces a tradeoff between counting rate and either detection efficiency or active area. Devices of usable size and high detection efficiency are found to have reset times orders of magnitude longer than their intrinsic photoresponse time.
△ Less
Submitted 26 October, 2005;
originally announced October 2005.
