Showing 1–50 of 76 results for author: Das, M

Non-maximal entanglement of photons from positron-electron annihilation demonstrated using a novel plastic PET scanner

Authors: P. Moskal, D. Kumar, S. Sharma, E. Y. Beyene, N. Chug, A. Coussat, C. Curceanu, E. Czerwinski, M. Das, K. Dulski, M. Gorgol, B. Jasinska, K. Kacprzak, T. Kaplanoglu, L. Kaplon, K. Klimaszewski, T. Kozik, E. Lisowski, F. Lisowski, W. Mryka, S. Niedzwiecki, S. Parzych, E. P. del Rio, L. Raczynski, M. Radler , et al. (7 additional authors not shown)

Abstract: In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originat… ▽ More In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originated. Here we present a novel J-PET scanner built from plastic scintillators, in which annihilation photons interact predominantly via the Compton effect, providing information about photon polarization in addition to information on photon direction of propagation. Theoretically, photons from the decay of positronium in a vacuum are maximally entangled in polarization. However, in matter, when the positron from positronium annihilates with the electron bound to the atom, the question arises whether the photons from such annihilation are maximally entangled. In this work, we determine the distribution of the relative angle between polarization orientations of two photons from positron-electron annihilation in a porous polymer. Contrary to prior results for positron annihilation in aluminum and copper, where the strength of observed correlations is as expected for maximally entangled photons, our results show a significant deviation. We demonstrate that in porous polymer, photon polarization correlation is weaker than for maximally entangled photons but stronger than for separable photons. The data indicate that more than 40% of annihilations in Amberlite resin lead to a non-maximally entangled state. Our result indicates the degree of correlation depends on the annihilation mechanism and the molecular arrangement. We anticipate that the introduced Compton interaction-based PET system opens a promising perspective for exploring polarization correlations in PET as a novel diagnostic indicator. △ Less

Submitted 11 July, 2024; originally announced July 2024.

Formation and Microwave Losses of Hydrides in Superconducting Niobium Thin Films Resulting from Fluoride Chemical Processing

Authors: Carlos G. Torres-Castanedo, Dominic P. Goronzy, Thang Pham, Anthony McFadden, Nicholas Materise, Paul Masih Das, Matthew Cheng, Dmitry Lebedev, Stephanie M. Ribet, Mitchell J. Walker, David A. Garcia-Wetten, Cameron J. Kopas, Jayss Marshall, Ella Lachman, Nikolay Zhelev, James A. Sauls, Joshua Y. Mutus, Corey Rae H. McRae, Vinayak P. Dravid, Michael J. Bedzyk, Mark C. Hersam

Abstract: Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potenti… ▽ More Superconducting Nb thin films have recently attracted significant attention due to their utility for quantum information technologies. In the processing of Nb thin films, fluoride-based chemical etchants are commonly used to remove surface oxides that are known to affect superconducting quantum devices adversely. However, these same etchants can also introduce hydrogen to form Nb hydrides, potentially negatively impacting microwave loss performance. Here, we present comprehensive materials characterization of Nb hydrides formed in Nb thin films as a function of fluoride chemical treatments. In particular, secondary-ion mass spectrometry, X-ray scattering, and transmission electron microscopy reveal the spatial distribution and phase transformation of Nb hydrides. The rate of hydride formation is determined by the fluoride solution acidity and the etch rate of Nb2O5, which acts as a diffusion barrier for hydrogen into Nb. The resulting Nb hydrides are detrimental to Nb superconducting properties and lead to increased power-independent microwave loss in coplanar waveguide resonators. However, Nb hydrides do not correlate with two-level system loss or device aging mechanisms. Overall, this work provides insight into the formation of Nb hydrides and their role in microwave loss, thus guiding ongoing efforts to maximize coherence time in superconducting quantum devices. △ Less

Submitted 5 April, 2024; originally announced April 2024.

External charge perturbation and electrostatic turbulence

Authors: Mridusmita Das, Madhurjya P. Bora

Abstract: Abstract In this work, an 1D electrostatic hybrid-Particle-in-Cell-Monte-Carlo-Collision (h-PIC-MCC) [13, 14] is used to study the response of a plasma to a moving, external, charged perturbation (debris). We show that the so-called pinned solitons can form only under certain specific conditions through a turbulent regime of the ion-ion counter-streaming electrostatic instability. In fact, the pin… ▽ More Abstract In this work, an 1D electrostatic hybrid-Particle-in-Cell-Monte-Carlo-Collision (h-PIC-MCC) [13, 14] is used to study the response of a plasma to a moving, external, charged perturbation (debris). We show that the so-called pinned solitons can form only under certain specific conditions through a turbulent regime of the ion-ion counter-streaming electrostatic instability. In fact, the pinned solitons are manifestation of the ion phase-space vortices formed around the debris. The simulation shows that the pinned solitons can form only when the debris velocity exceeds a certain critical velocity pushing the instability to a turbulent regime and can then disappear when debris velocity becomes highly supersonic. We further show the existence of a Kolmogorv-type inverse-cascading scaling for this electrostatic turbulence. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: 15 pages, 7 figures

Examining the Influence of Digital Phantom Models in Virtual Imaging Trials for Tomographic Breast Imaging

Authors: Amar Kavuri, Mini Das

Abstract: Purpose: Digital phantoms are one of the key components of virtual imaging trials (VITs) that aim to assess and optimize new medical imaging systems and algorithms. However, these phantoms vary in their voxel resolution, appearance, and structural details. This study aims to examine whether and how variations between digital phantoms influence system optimization with digital breast tomosynthesis… ▽ More Purpose: Digital phantoms are one of the key components of virtual imaging trials (VITs) that aim to assess and optimize new medical imaging systems and algorithms. However, these phantoms vary in their voxel resolution, appearance, and structural details. This study aims to examine whether and how variations between digital phantoms influence system optimization with digital breast tomosynthesis (DBT) as a chosen modality. Methods: We selected widely used and open-access digital breast phantoms generated with different methods. For each phantom type, we created an ensemble of DBT images to test acquisition strategies. Human observer localization ROC (LROC) was used to assess observer performance studies for each case. Noise power spectrum (NPS) was estimated to compare the phantom structural components. Further, we computed several gaze metrics to quantify the gaze pattern when viewing images generated from different phantom types. Results: Our LROC results show that the arc samplings for peak performance were approximately 2.5 degrees and 6 degrees in Bakic and XCAT breast phantoms respectively for 3-mm lesion detection tasks and indicate that system optimization outcomes from VITs can vary with phantom types and structural frequency components. Additionally, a significant correlation (p= 0.01) between gaze metrics and diagnostic performance suggests that gaze analysis can be used to understand and evaluate task difficulty in VITs. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Comments: 20 pages, 8 figures

Switchable Photovoltaic Effect in Ferroelectric CsPbBr3 Nanocrystals

Authors: Anashmita Ghosh, Susmita Paul, Mrinmay Das, Piyush Kanti Sarkar, Pooja Bhardwaj, Goutam Sheet, Surajit Das, Anuja Datta, Somobrata Acharya

Abstract: Ferroelectric all-inorganic halide perovskites nanocrystals with both spontaneous polarizations and visible light absorption are promising candidates for designing functional ferroelectric photovoltaic devices. Three dimensional halide perovskite nanocrystals have the potential of being ferroelectric, yet it remains a challenge to realize ferroelectric photovoltaic devices which can be operated in… ▽ More Ferroelectric all-inorganic halide perovskites nanocrystals with both spontaneous polarizations and visible light absorption are promising candidates for designing functional ferroelectric photovoltaic devices. Three dimensional halide perovskite nanocrystals have the potential of being ferroelectric, yet it remains a challenge to realize ferroelectric photovoltaic devices which can be operated in absence of an external electric field. Here we report that a popular all-inorganic halide perovskite nanocrystal, CsPbBr3, exhibits ferroelectricity driven photovoltaic effect under visible light in absence of an external electric field. The ferroelectricity in CsPbBr3 nanocrystals originates from the stereochemical activity in Pb (II) lone pair that promotes the distortion of PbBr6 octahedra. Furthermore, application of an external electric field allows the photovoltaic effect to be enhanced and the spontaneous polarization to be switched with the direction of the electric field. Robust fatigue performance, flexibility and prolonged photoresponse under continuous illumination are potentially realized in the zero-bias conditions. These finding establishes all-inorganic halide perovskites nanocrystals as potential candidates for designing novel photoferroelectric devices by coupling optical functionalities and ferroelectric responses. △ Less

Submitted 10 January, 2024; v1 submitted 6 January, 2024; originally announced January 2024.

Morphological Control of Bundled Actin Networks Subject to Fixed-Mass Depletion

Authors: James Clarke, Lauren Melcher, Anne D. Crowell, Francis Cavanna, Justin R. Houser, Kristin Graham, Allison Green, Jeanne C. Stachowiak, Thomas M. Truskett, Delia J. Milliron, Adrianne M. Rosales, Moumita Das, José Alvarado

Abstract: Depletion interactions are thought to significantly contribute to the organization of intracellular structures in the crowded cytosol. The strength of depletion interactions depends on physical parameters like the depletant number density and the depletant size ratio. Cells are known to dynamically regulate these two parameters by varying the copy number of proteins of a wide distribution of sizes… ▽ More Depletion interactions are thought to significantly contribute to the organization of intracellular structures in the crowded cytosol. The strength of depletion interactions depends on physical parameters like the depletant number density and the depletant size ratio. Cells are known to dynamically regulate these two parameters by varying the copy number of proteins of a wide distribution of sizes. However, mammalian cells are also known to keep the total protein mass density remarkably constant, to within 0.5% throughout the cell cycle. We thus ask how the strength of depletion interactions varies when the total depletant mass is held fixed, a.k.a. fixed-mass depletion. We answer this question via scaling arguments, as well as by studying depletion effects on networks of reconstituted semiflexible actin $\textit{in silico}$ and $\textit{in vitro}$. We examine the maximum strength of the depletion interaction potential $U^*$ as a function of $q$, the size ratio between the depletant and the matter being depleted. We uncover a scaling relation $U^* \sim q^{-ζ}$ for two cases: fixed volume fraction $φ$ and fixed mass density $ρ$. For fixed volume fraction, we report $ζ< 0$. For the fixed mass density case, we report $ζ> 0$, which suggests the depletion interaction strength increases as the depletant size ratio is increased. To test this prediction, we prepared our filament networks at fixed mass concentrations with varying sizes of the depletant molecule poly(ethylene glycol) (PEG). We characterize the depletion interaction strength in our simulations via the mesh size. In experiments, we observe two distinct actin network morphologies, which we call weakly bundled and strongly bundled. We identify a mass concentration where different PEG depletant sizes leads to weakly bundled or strongly bundled morphologies...[more in main text]. △ Less

Submitted 23 November, 2023; originally announced December 2023.

Comments: 21 pages, 5 figures. arXiv admin note: substantial text overlap with arXiv:2205.01864

Transport-of-Intensity Model for Single-Mask X-ray Differential Phase Contrast Imaging

Authors: **gcheng Yuan, Mini Das

Abstract: X-ray phase contrast imaging holds great promise for improving the visibility of light-element materials such as soft tissues and tumors. Single-mask differential phase contrastnimaging method stands out as a simple and effective approach to yield differential phase contrast. In this work, we introduce a novel model for a single-mask phase imaging system based on the transport-of-intensity equatio… ▽ More X-ray phase contrast imaging holds great promise for improving the visibility of light-element materials such as soft tissues and tumors. Single-mask differential phase contrastnimaging method stands out as a simple and effective approach to yield differential phase contrast. In this work, we introduce a novel model for a single-mask phase imaging system based on the transport-of-intensity equation. Our model provides an accessible understanding of signal and contrast formation in single-mask X-ray phase imaging, offering a clear perspective on the image formation process, for example, the origin of alternate bright and dark fringes in phase contrast intensity images. Aided by our model, we present an efficient retrieval method that yields differential phase contrast imagery in a single acquisition step. Our model gives insight into the contrast generation and its dependence on the system geometry and imaging parameters in both the initial intensity image as well as in retrieved images. The model validity as well as the proposed retrieval method is demonstrated via both experimental results on a system developed in-house as well as with Monte Carlo simulations. In conclusion, our work not only provides a model for an intuitive visualization of image formation but also offers a method to optimize differential phase imaging setups, holding tremendous promise for advancing medical diagnostics and other applications. △ Less

Submitted 31 January, 2024; v1 submitted 29 October, 2023; originally announced October 2023.

Comments: 10 pages, 6 figures

Iterative Clustering Material Decomposition Aided by Empirical Spectral Correction for High-Resolution Photon-Counting Detectors in Micro-CT

Authors: Juan C. R. Luna, Mini Das

Abstract: Photon counting detectors (PCDs) offer promising advancements in computed tomography (CT) imaging by enabling the quantification and 3D imaging of contrast agents and tissue types through multi-energy projections. However, the accuracy of these decomposition methods hinges on precise composite spectral attenuation values that one must reconstruct from spectral micro CT. Factors such as surface def… ▽ More Photon counting detectors (PCDs) offer promising advancements in computed tomography (CT) imaging by enabling the quantification and 3D imaging of contrast agents and tissue types through multi-energy projections. However, the accuracy of these decomposition methods hinges on precise composite spectral attenuation values that one must reconstruct from spectral micro CT. Factors such as surface defects, local temperature, signal amplification, and impurity levels can cause variations in detector efficiency between pixels, leading to significant quantitative errors. In addition, some inaccuracies such as the charge-sharing effects in PCDs are amplified with a high Z sensor material and also with a smaller detector pixels that are preferred for micro CT. In this work, we propose a comprehensive approach that combines practical instrumentation and measurement strategies leading to the quantitation of multiple materials within an object in a spectral micro CT with a photon counting detector. Our Iterative Clustering Material Decomposition (ICMD) includes an empirical method for detector spectral response corrections, cluster analysis and multi-step iterative material decomposition. Utilizing a CdTe-1mm Medipix detector with a 55$μ$m pitch, we demonstrate the quantitatively accurate decomposition of several materials in a phantom study, where the sample includes mixtures of material, soft material and K-edge materials. We also show an example of biological sample imaging and separating three distinct types of tissue in mouse: muscle, fat and bone. Our experimental results show that the combination of spectral correction and high-dimensional data clustering enhances decomposition accuracy and reduces noise in micro CT. This ICMD allows for quantitative separation of more than three materials including mixtures and also effectively separates multi-contrast agents. △ Less

Submitted 16 October, 2023; originally announced October 2023.

Comments: 14 pages, 13 figures

Improved charge storage capacity of supercapacitor electrodes by engineering surfaces: the case of Janus MXenes

Authors: Mandira Das, Subhradip Ghosh

Abstract: Surface Engineering in two-dimensional(2D) materials has turned out to be an useful technique to improve their functional properties. By designing Janus compounds MM$^{\prime}$C in MXene family of compounds M$_{2}$C where the two surfaces are constituted by two different transition metal M and M$^{\prime}$, we have explored their potentials as electrodes in a supercapacitor with acidic electrolyte… ▽ More Surface Engineering in two-dimensional(2D) materials has turned out to be an useful technique to improve their functional properties. By designing Janus compounds MM$^{\prime}$C in MXene family of compounds M$_{2}$C where the two surfaces are constituted by two different transition metal M and M$^{\prime}$, we have explored their potentials as electrodes in a supercapacitor with acidic electrolyte. Using Density functional Theory (DFT) \cite{dft} in conjunction with classical solvation model we have made an in depth analysis of the electrochemical parameters of three Janus MXenes, passivated by oxygen - NbVC, MnVC and CrMnC. Comparisons with the corresponding end point MXenes Nb$_{2}$C, V$_{2}$C, Mn$_{2}$C and Cr$_{2}$C are also made. We find that the surface redox activity enhances due to formation of Janus, improving the charge storage capacities of MXene electrodes significantly. Our analysis reveals that the improved functionality has its root in the variations in the charge state of one of the constituents in the Janus compound which, in turn, has its origin in the electronic structure changes due to the surface manipulation. Our work, which is the first on the electrochemical properties of Janus MXenes for supercapacitor applications, suggests the surface engineering by forming appropriate Janus compounds as a possible route to extract high power density in a MXene electrode-acidic electrolyte based energy storage devices. △ Less

Submitted 10 October, 2023; originally announced October 2023.

Feasibility studies for imaging e$^{+}$e$^{-}$ annihilation with modular multi-strip detectors

Authors: S. Sharma, L. Povolo, S. Mariazzi, G. Korcyl, K. Kacprzak, D. Kumar, S. Niedzwiecki, J. Baran, E. Beyene, R. S. Brusa, R. Caravita, N. Chug, A. Coussat, C. Curceanu, E. Czerwinski, M. Dadgar, M. Das, K. Dulski, K. Eliyan, A. Gajos, N. Gupta, B. C. Hiesmayr, L. Kaplon, T. Kaplanoglu, K. Klimaszewski , et al. (19 additional authors not shown)

Abstract: Studies based on imaging the annihilation of the electron (e$^{-}$) and its antiparticle positron (e$^{+}$) open up several interesting applications in nuclear medicine and fundamental research. The annihilation process involves both the direct conversion of e$^{+}$e$^{-}$ into photons and the formation of their atomically bound state, the positronium atom (Ps), which can be used as a probe for fu… ▽ More Studies based on imaging the annihilation of the electron (e$^{-}$) and its antiparticle positron (e$^{+}$) open up several interesting applications in nuclear medicine and fundamental research. The annihilation process involves both the direct conversion of e$^{+}$e$^{-}$ into photons and the formation of their atomically bound state, the positronium atom (Ps), which can be used as a probe for fundamental studies. With the ability to produce large quantities of Ps, manipulate them in long-lived Ps states, and image their annihilations after a free fall or after passing through atomic interferometers, this purely leptonic antimatter system can be used to perform inertial sensing studies in view of a direct test of Einstein equivalence principle. It is envisioned that modular multistrip detectors can be exploited as potential detection units for this kind of studies. In this work, we report the results of the first feasibility study performed on a e$^{+}$ beamline using two detection modules to evaluate their reconstruction performance and spatial resolution for imaging e$^{+}$e$^{-}$ annihilations and thus their applicability for gravitational studies of Ps. △ Less

Submitted 12 September, 2023; originally announced September 2023.

The possibility of hypersonic electrostatic solitons in a plasma with turbulence heating

Authors: Mridusmita Das, Madhurjya P. Bora

Abstract: Here, we show that electrostatic solitons in a plasma with turbulent heating of the electrons through an accelerating electric field, can form with very high velocities, reaching up to several order of magnitudes larger than the ion-sound speed. We call these solitons hypersonic solitons. The possible parameter regime, where this work may be relevant, can be found the so-called ``dead zones'' of a… ▽ More Here, we show that electrostatic solitons in a plasma with turbulent heating of the electrons through an accelerating electric field, can form with very high velocities, reaching up to several order of magnitudes larger than the ion-sound speed. We call these solitons hypersonic solitons. The possible parameter regime, where this work may be relevant, can be found the so-called ``dead zones'' of a protoplanetary disk. These zones are stable to magnetorotational instability but the resultant turbulence can in effect heat the electrons make them follow a highly non-Maxwellian velocity distribution. We show that these hypersonic solitons can also reach very high velocities. With electron velocity distribution described by Davydov distribution function, we argue that these solitons can be an effective mechanism for energy equilibration in such a situation through soliton decay and radiation. △ Less

Submitted 13 August, 2023; originally announced August 2023.

Comments: 12 pages, 5 figures

Laser based optical interferometer manometer design for primary pressure standard in India

Authors: Manoj Das, Sandip Kumar Ghosh, Kuldeep Kumar, Elizabeth Jeessa James, Megha Singh, Ashok Kumar

Abstract: The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based… ▽ More The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used to realize Pascal. Such a realization is mercury-free and environmentally friendly and does not depend on any mechanical motions as in piston gauges and is based on physical constants. It consists of an optical Fabry-Perot cavity as a refractometer and is based on the measurement of the resonant frequency of the cavity using lasers. In this paper, we report the theoretical calculations for such an optical cavity and discuss various parameters for the laser required for develo** such a cavity-based refractometer system. We present the mechanical design for the dual cavity and an all-fiber optical set-up to be used for the next generation of primary pressure standards in the barometric region of pressure at CSIR-National physical laboratory, India. △ Less

Submitted 17 June, 2023; originally announced July 2023.

Comments: 8 pages, 7 figures

Enhancement of the laser-induced excitation probability of the hyperfine ground state of muonic hydrogen by a multipass cavity setup

Authors: Rakesh Mohan Das, Masahiko Iwasaki

Abstract: We study the enhancement of the magnetic dipole induced excitation probability of the hyperfine ground state of Doppler-broadened muonic hydrogen ($p μ^{-}$) by a nanosecond laser pulse in the mid-infrared range with Gaussian temporal shape such that the pulse bandwidth is broader than the Doppler width at 10~K. The enhancement is achieved by shrinking the cross-section of the laser pulse and plac… ▽ More We study the enhancement of the magnetic dipole induced excitation probability of the hyperfine ground state of Doppler-broadened muonic hydrogen ($p μ^{-}$) by a nanosecond laser pulse in the mid-infrared range with Gaussian temporal shape such that the pulse bandwidth is broader than the Doppler width at 10~K. The enhancement is achieved by shrinking the cross-section of the laser pulse and placing the muonic hydrogen medium in a multipass cavity, while preserving the total irradiated target volume. We numerically solve a set of Maxwell-Schr$\ddot{\rm o}$dinger equations to obtain the excitation probability and the total efficiency for various densities of the muonic hydrogen atomic medium and at various positions in the multipass cavity. For the typical range of densities of muonic hydrogen atoms at major proton accelerator facilities such as the J-PARC (density $\sim$ $10^5$cm$^{-3}$), the laser propagation effect is insignificant. For such cases, the total efficiency increases by an order of two for 100 reflections with a uniform polarization. If the density exceeds the value of $10^{17}$cm$^{-3}$ as might be in the future advances, the laser propagation effect has to be taken into account, and the total efficiency decreases with the number of reflections giving rise to a pulsed polarization of the beam. Our study can serve as a guideline for the development of a polarized muonic beam for a precise measurement of the ground state hyperfine splitting of muonic hydrogen, or for $μ$SR experiments. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Timed material self-assembly controlled by circadian clock proteins

Authors: Gregor Leech, Lauren Melcher, Michelle Chiu, Maya Nugent, Lily Burton, Janet Kang, Soo Ji Kim, Sourav Roy, Leila Farhadi, Jennifer L. Ross, Moumita Das, Michael J. Rust, Rae M. Robertson-Anderson

Abstract: Active biological molecules present a powerful, yet largely untapped, opportunity to impart autonomous regulation to materials. Because these systems can function robustly to regulate when and where chemical reactions occur, they have the ability to bring complex, life-like behavior to synthetic materials. Here, we achieve this design feat by using functionalized circadian clock proteins, KaiB and… ▽ More Active biological molecules present a powerful, yet largely untapped, opportunity to impart autonomous regulation to materials. Because these systems can function robustly to regulate when and where chemical reactions occur, they have the ability to bring complex, life-like behavior to synthetic materials. Here, we achieve this design feat by using functionalized circadian clock proteins, KaiB and KaiC, to engineer time-dependent crosslinking of colloids. The resulting material self-assembles with programmable kinetics, producing macroscopic changes in material properties, via molecular assembly of KaiB-KaiC complexes. We show that colloid crosslinking depends strictly on the phosphorylation state of KaiC, with kinetics that are synced with KaiB-KaiC complexing. Our microscopic image analyses and computational models indicate that the stability of colloidal super-structures depends sensitively on the number of Kai complexes per colloid connection. Consistent with our model predictions, a high concentration stabilizes the material against dissolution after a robust self-assembly phase, while a low concentration allows circadian oscillation of material structure. This work introduces the concept of harnessing biological timers to control synthetic materials; and, more generally, opens the door to using protein-based reaction networks to endow synthetic systems with life-like functional properties. △ Less

Submitted 20 March, 2024; v1 submitted 1 March, 2023; originally announced March 2023.

Comments: 5 figures + SI

Driven dust-charge fluctuation and chaotic ion dynamics in the plasma sheath and pre-sheath regions

Authors: Mridusmita Das, Suniti Changmai, Madhurjya P. Bora

Abstract: Possible existence of chaotic oscillations in ion dynamics in the sheath and pre-sheath regions of a dusty plasma, induced by externally driven dust-charge fluctuation, is presented in this work. In a complex plasma, dust charge fluctuation occurs continuously with time due to the variation of electron and ions current flowing into the dust particles. In most of the works related to dust-charge fl… ▽ More Possible existence of chaotic oscillations in ion dynamics in the sheath and pre-sheath regions of a dusty plasma, induced by externally driven dust-charge fluctuation, is presented in this work. In a complex plasma, dust charge fluctuation occurs continuously with time due to the variation of electron and ions current flowing into the dust particles. In most of the works related to dust-charge fluctuation, theoretically it is assumed that the average dust-charge fluctuation follows the the plasma perturbation, while in reality, the dust-charge fluctuation is a semi-random phenomena, fluctuating about some average value. The very cause of dust-charge fluctuation in a dusty plasma also points to the fact that these fluctuations can be driven externally by changing electron and ion currents to the dust particles. With the help of a \emph{hybrid}-Particle in Cell-Monte Carlo (\emph{h}-PIC-MCC) code in this work, we use the plasma sheath as a candidate for driving the dust-charge fluctuation by periodically exposing the sheath-side wall to UV radiation, causing photoemission of electrons, which in turn drive the dust-charge fluctuation. We show that this \emph{driven} dust-charge fluctuation can induce a chaotic response in the ion dynamics in the sheath and the pre-sheath regions. △ Less

Submitted 29 December, 2022; v1 submitted 6 December, 2022; originally announced December 2022.

Comments: 16 pages, 11 figures

Journal ref: Phys. Rev. E 108, 045202 (2023)

Determining the bubble nucleation efficiency of low-energy nuclear recoils in superheated C$_3$F$_8$ dark matter detectors

Authors: B. Ali, I. J. Arnquist, D. Baxter, E. Behnke, M. Bressler, B. Broerman, K. Clark, J. I. Collar, P. S. Cooper, C. Cripe, M. Crisler, C. E. Dahl, M. Das, D. Durnford, S. Fallows, J. Farine, R. Filgas, A. García-Viltres, F. Girard, G. Giroux, O. Harris, E. W. Hoppe, C. M. Jackson, M. **, C. B. Krauss , et al. (32 additional authors not shown)

Abstract: The bubble nucleation efficiency of low-energy nuclear recoils in superheated liquids plays a crucial role in interpreting results from direct searches for weakly interacting massive particle (WIMP) dark matter. The PICO Collaboration presents the results of the efficiencies for bubble nucleation from carbon and fluorine recoils in superheated C$_3$F$_8$ from calibration data taken with 5 distinct… ▽ More The bubble nucleation efficiency of low-energy nuclear recoils in superheated liquids plays a crucial role in interpreting results from direct searches for weakly interacting massive particle (WIMP) dark matter. The PICO Collaboration presents the results of the efficiencies for bubble nucleation from carbon and fluorine recoils in superheated C$_3$F$_8$ from calibration data taken with 5 distinct neutron spectra at various thermodynamic thresholds ranging from 2.1 keV to 3.9 keV. Instead of assuming any particular functional forms for the nuclear recoil efficiency, a generalized piecewise linear model is proposed with systematic errors included as nuisance parameters to minimize model-introduced uncertainties. A Markov-Chain Monte-Carlo (MCMC) routine is applied to sample the nuclear recoil efficiency for fluorine and carbon at 2.45 keV and 3.29 keV thermodynamic thresholds simultaneously. The nucleation efficiency for fluorine was found to be $\geq 50\, \%$ for nuclear recoils of 3.3 keV (3.7 keV) at a thermodynamic Seitz threshold of 2.45 keV (3.29 keV), and for carbon the efficiency was found to be $\geq 50\, \%$ for recoils of 10.6 keV (11.1 keV) at a threshold of 2.45 keV (3.29 keV). Simulated data sets are used to calculate a p-value for the fit, confirming that the model used is compatible with the data. The fit paradigm is also assessed for potential systematic biases, which although small, are corrected for. Additional steps are performed to calculate the expected interaction rates of WIMPs in the PICO-60 detector, a requirement for calculating WIMP exclusion limits. △ Less

Submitted 7 November, 2022; v1 submitted 11 May, 2022; originally announced May 2022.

Comments: 17 pages, 22 figures, 5 tables

Depletion-Driven Morphological Control of Bundled Actin Networks

Authors: James Clarke, Francis Cavanna, Anne D. Crowell, Lauren Melcher, Justin R. Houser, Kristin Graham, Allison Green, Jeanne C. Stachowiak, Thomas M. Truskett, Delia J. Milliron, Adrianne M. Rosales, Moumita Das, José Alvarado

Abstract: The actin cytoskeleton is a semiflexible biopolymer network whose morphology is controlled by a wide range of biochemical and physical factors. Actin is known to undergo a phase transition from a single-filament state to a bundled state by the addition of polyethylene glycol (PEG) molecules in sufficient concentration. While the depletion interaction experienced by these biopolymers is well-known,… ▽ More The actin cytoskeleton is a semiflexible biopolymer network whose morphology is controlled by a wide range of biochemical and physical factors. Actin is known to undergo a phase transition from a single-filament state to a bundled state by the addition of polyethylene glycol (PEG) molecules in sufficient concentration. While the depletion interaction experienced by these biopolymers is well-known, the effect of changing the molecular weight of the depletant is less well understood. Here, we experimentally identify a phase transition in solutions of actin from networks of filaments to networks of bundles by varying the molecular weight of PEG polymers, while holding the concentration of these PEG polymers constant. We examine the states straddling the phase transition in terms of micro and macroscale properties. We find that the mesh size, bundle diameter, persistence length, and intra-bundle spacing between filaments across the line of criticality do not show significant differences, while the relaxation time, storage modulus, and degree of bundling change between the two states do show significant differences. Our results demonstrate the ability to tune actin network morphology and mechanics by controlling depletant size, a property which could be exploited to develop actin-based materials with switchable rigidity. △ Less

Submitted 1 October, 2022; v1 submitted 3 May, 2022; originally announced May 2022.

Comments: 22 pages, 10 figures. Authors James Clarke and Francis Cavanna contributed equally; Changes: Added modeling work, extended dynamic light scattering analysis

Energy-sensitive scatter estimation and correction for spectral x-ray imaging with photon-counting detectors

Authors: Cale E. Lewis, Mini Das

Abstract: As photon counting detectors are being explored for medical and industrial imaging applications, there is a critical need to understand spectral characteristics of scattered x-ray photons. Scattered radiation is detrimental to x-ray imaging by reducing image quality and quantitative accuracy. While various scatter correction techniques have been proposed for x-ray imaging with conventional energy-… ▽ More As photon counting detectors are being explored for medical and industrial imaging applications, there is a critical need to understand spectral characteristics of scattered x-ray photons. Scattered radiation is detrimental to x-ray imaging by reducing image quality and quantitative accuracy. While various scatter correction techniques have been proposed for x-ray imaging with conventional energy-integrating detectors, additional efforts are required to develop approaches for spectral x-ray imaging with energy-resolving PCDs. We show the benefits of accurate scatter estimation and correction for each energy bin when using a photon counting detector. We propose a scatter estimation model that accounts for the energy-dependent scatter characteristics in projection x-ray imaging. This can then be used to restore quantitative accuracy for spectral x-ray imaging with PCDs. Results are shown in the context of contrast-enhanced spectral mammography using dual-energy subtraction to digitally isolate iodine targets. In the presence of scatter, the projected iodine densities are increasingly underestimated as the object thickness increases. The energysensitive scatter correction improves the iodine density estimation. These results suggest that our scatter estimation model can accurately account for the energy-dependent scatter distribution, which can be an effective tool for scatter compensation in spectral x-ray imaging. Implementing this scatter estimation model does not require any modifications to the acquisition parameters and is transferable to other x-ray imaging applications such as tomosynthesis and CT. △ Less

Submitted 6 April, 2022; originally announced April 2022.

Comments: 14 pages, 14 figures

Motor antagonism dictates emergent dynamics in active double networks tuned by crosslinkers

Authors: Ryan J. McGorty, Christopher J. Currie, Jonathan Michel, Mehrzad Sasanpour, Christopher Gutner, K. Alice Lindsay, Michael J. Rust, Parag Katira, Moumita Das, Jennifer L. Ross, Rae M. Robertson-Anderson

Abstract: The cytoskeleton relies on diverse populations of motors, filaments, and binding proteins acting in concert to enable non-equilibrium processes ranging from mitosis to chemotaxis. Its versatile reconfigurability, programmed by interactions between its constituents, make the cytoskeleton foundational active matter. Yet, current active matter endeavors are limited largely to single force-generating… ▽ More The cytoskeleton relies on diverse populations of motors, filaments, and binding proteins acting in concert to enable non-equilibrium processes ranging from mitosis to chemotaxis. Its versatile reconfigurability, programmed by interactions between its constituents, make the cytoskeleton foundational active matter. Yet, current active matter endeavors are limited largely to single force-generating components acting on a single substrate, far from the composite cytoskeleton in cells. Here, we engineer actin-microtubule double-networks, driven by kinesin and myosin motors and tuned by crosslinkers, to ballistically restructure and flow with speeds that span three orders of magnitude depending on the composite formulation and time relative to the onset of motor activity. Differential dynamic microscopy analyses reveal that kinesin and myosin compete to delay the onset of acceleration and suppress discrete restructuring events, while passive crosslinking of either actin or microtubules has an opposite effect. Our minimal advection-diffusion model and spatial correlation analyses correlate these dynamics to structure, with motor antagonism suppressing reconfiguration and de-mixing, while crosslinking enhances clustering. Despite the rich formulation space and emergent formulation-dependent structures, the non-equilibrium dynamics across all networks and timescales can be organized into three classes: slow isotropic reorientation, fast directional flow, and multimode restructuring. Moreover, our mathematical model demonstrates that diverse structural motifs can arise simply from the interplay between motor-driven advection and frictional drag. These general features of our platform facilitate applicability to other active matter systems, and shed light on diverse ways that cytoskeletal components can cooperate or compete to enable wide-ranging cellular processes. △ Less

Submitted 19 May, 2023; v1 submitted 21 December, 2021; originally announced December 2021.

Quantifying the Consequences of Catheter Steerability Limitations on Targeted Drug Delivery

Authors: Pawan Kumar Pandey, Malay Kumar Das

Abstract: In this work, we virtually study the intra-arterial targeted drug delivery. Specifically, this work models and quantifies the uncertainties associated with catheter steerability limitations. We classify catheter's limited steerability into two types, i.e., zero steerability, and wall pressing steerability. Further, we investigate the effects of steerability limitations on uncertainty of causing sy… ▽ More In this work, we virtually study the intra-arterial targeted drug delivery. Specifically, this work models and quantifies the uncertainties associated with catheter steerability limitations. We classify catheter's limited steerability into two types, i.e., zero steerability, and wall pressing steerability. Further, we investigate the effects of steerability limitations on uncertainty of causing systemic toxicity levels, i.e., percentage of drug particles missing target. Proposed method quantifies the uncertainty of causing systemic toxicity in terms of probability. With this calculation approach, we look at the effects of upstream vasculature and catheter tip size. Results indicate the existence of a 'transition toxicity' level. Beyond transition toxicity level, larger catheters should be preferred over smaller catheters. Furthermore, we found that it is relatively easier to decide preferrable catheter size in zero-steerability than wall-pressing steerability conditions. △ Less

Submitted 14 November, 2021; originally announced November 2021.

Comments: 39 pages, 13 figures + 1 graphical abstract

Effect of Foam Insertion in Aneurysm Sac on Flow Structures in Parent Lumen: Relating Vortex Structures with Disturbed Shear

Authors: Pawan Kumar Pandey, Malay Kumar Das

Abstract: Numerous studies suggest that disturbed shear, causing endothelium dysfunction, can be related to neighboring vortex structures. With this motivation, this study presents a methodology to characterize the vortex structures. Precisely, we use map** and characterization of vortex structures' changes to relate it with the hemodynamic indicators of disturbed shear. Topological features of vortex cor… ▽ More Numerous studies suggest that disturbed shear, causing endothelium dysfunction, can be related to neighboring vortex structures. With this motivation, this study presents a methodology to characterize the vortex structures. Precisely, we use map** and characterization of vortex structures' changes to relate it with the hemodynamic indicators of disturbed shear. Topological features of vortex core lines (VCLs) are used to quantify the changes in vortex structures. We use the Sujudi-Haimes algorithm to extract the VCLs from the flow simulation results. The idea of relating vortex structures with disturbed shear is demonstrated for cerebral arteries with aneurysms virtually treated by inserting foam in the sac. To get physiologically realistic flow fields, we simulate blood flow in two patient-specific geometries before and after foam insertion, with realistic velocity waveform imposed at the inlet, using the Carreau-Yashuda model to mimic the shear-thinning behavior. With homogenous porous medium assumption, flow through the foam is modeled using the Forcheimmer-Brinkmann extended Darcy model. Results show that foam insertion increases the number of VCLs in the parent lumen. The average length of VCL increases by 168.9% and 55.6% in both geometries. For both geometries under consideration, results demonstrate that the region with increased disturbed shear lies in the same arterial segment exhibiting an increase in the number of oblique VCLs. Based on the findings, we conjecture that an increase in oblique VCLs is related to increased disturbed shear at the neighboring portion of the arterial wall. △ Less

Submitted 27 June, 2021; originally announced June 2021.

Comments: 36 pages, 10 figures, 3 tables, submitted to Physical and Engineering Sciences in Medicine

Structural Origins of Cartilage Shear Mechanics

Authors: Thomas Wyse Jackson, Jonathan Michel, Pancy Lwin, Lisa A. Fortier, Moumita Das, Lawrence J. Bonassar, Itai Cohen

Abstract: Healthy cartilage is a remarkable tissue, able to withstand tens of millions of loading cycles with minimal damage. While much is known about the structural origins of its compressive mechanics, how composition determines its mechanical behavior in shear, a major mode of failure, is poorly understood. Through a combination of microscale structure-function experiments and modeling, we develop a rig… ▽ More Healthy cartilage is a remarkable tissue, able to withstand tens of millions of loading cycles with minimal damage. While much is known about the structural origins of its compressive mechanics, how composition determines its mechanical behavior in shear, a major mode of failure, is poorly understood. Through a combination of microscale structure-function experiments and modeling, we develop a rigidity percolation framework to explain the structural origins of cartilage shear mechanics. This framework provides a new quantitative understanding for how the known degradative events in osteoarthritis determine the mechanical changes that are a hallmark of this disease. As such, this work provides a road map for understanding disease progression and in combination with non-invasive techniques such as MRI will enable more effective diagnosis and treatment. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: 9 pages, 3 pages of SI, 5 figures

Radiation tolerant, thin, passive CMOS sensors read out with the RD53A chip

Authors: Yannick Dieter, Michael Daas, Jochen Dingfelder, Tomasz Hemperek, Fabian Hügging, Jens Janssen, Hans Krüger, David-Leon Pohl, Marco Vogt, Tianyang Wang, Norbert Wermes, Pascal Wolf

Abstract: The radiation hardness of passive CMOS pixel sensors fabricated in 150 nm LFoundry technology is investigated. CMOS process lines are especially of interest for large-scale silicon detectors as they offer high production throughput at comparatively low cost. Moreover, several features like poly-silicon resistors, MIM-capacitors and several metal layers are available which can help enhance the sens… ▽ More The radiation hardness of passive CMOS pixel sensors fabricated in 150 nm LFoundry technology is investigated. CMOS process lines are especially of interest for large-scale silicon detectors as they offer high production throughput at comparatively low cost. Moreover, several features like poly-silicon resistors, MIM-capacitors and several metal layers are available which can help enhance the sensor design. The performance of a 100 $\mathrmμ$m thin passive CMOS sensor with a pixel pitch of 50 $\mathrmμ$m at different irradiation levels, 5 $\times$ 10$^{15}$n$_{\mathrm{eq}}$cm$^{-2}$ and 1 $\times$ 10$^{16}$n$_{\mathrm{eq}}$cm$^{-2}$, is presented. The sensor was bump-bonded and read out using the RD53A readout chip. After the highest fluence a hit-detection efficiency larger than 99% is measured for minimum ionising particles. The measured equivalent noise charge is comparable to conventional planar pixel sensors. Passive CMOS sensors are thus an attractive option for silicon detectors operating in radiation harsh environments like the upgrades for the LHC experiments. △ Less

Submitted 9 May, 2021; originally announced May 2021.

Comments: 18 pages, 10 figures

Active restructuring of cytoskeleton composites leads to increased mechanical stiffness, memory, and heterogeneity

Authors: Janet Y. Sheung, Daisy H. Achiriloaie, Karthik Peddireddy, Gloria Lee, Michael J. Rust, Moumita Das, Jennifer L. Ross, Rae M. Robertson-Anderson

Abstract: The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers mi… ▽ More The composite cytoskeleton, comprising interacting networks of semiflexible actin and rigid microtubules, actively generates forces and restructures using motor proteins such as myosins to enable key mechanical processes including cell motility and mitosis. Yet, how motor-driven activity alters the mechanics of cytoskeleton composites remains an open challenge. Here, we perform optical tweezers microrheology on actin-microtubule composites driven by myosin II motors to show that motor activity increases the linear viscoelasticity and elastic storage of the composite by active restructuring to a network of tightly-packed filament clusters and bundles. Our nonlinear microrheology measurements performed hours after cessation of activity show that the motor-contracted structure is stable and robust to nonlinear forcing. Unique features of the nonlinear response include increased mechanical stiffness, memory and heterogeneity, coupled with suppressed filament bending following motor-driven restructuring. Our results shed important new light onto the interplay between viscoelasticity and non-equilibrium dynamics in active polymer composites such as the cytoskeleton. △ Less

Submitted 7 May, 2022; v1 submitted 6 May, 2021; originally announced May 2021.

Journal ref: ACS Macro Lett. 2021, 10, 9 1151-1158

Three Dimensional Simulation of Oscillatory Flow in Partial Porous Tube

Authors: Pawan Kumar Pandey, Malay Kumar Das

Abstract: Characteristics of Oscillating Flow in a Straight Tube with varying thickness of porous layer at the wall is studied. Results for two different porous layer is discussed and compared in terms of Velocity Profile, phase differences and radial position of maximum velocity over the cross-section. Present problem is modeled using Navier-Stokes Equation in clear medium at the core of tube while Darcy-B… ▽ More Characteristics of Oscillating Flow in a Straight Tube with varying thickness of porous layer at the wall is studied. Results for two different porous layer is discussed and compared in terms of Velocity Profile, phase differences and radial position of maximum velocity over the cross-section. Present problem is modeled using Navier-Stokes Equation in clear medium at the core of tube while Darcy-BrinkmannForcheimmer Model is used for the outer porous layer. Solutions for these equations have been obtained using Finite Volume Method based 3D unstructured solver. Velocity profile obtained for tube with high permeability porous layer is the main highlight of results. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Comments: 3 pages, 6 figures, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016), Paper No. 415

Active Cytoskeletal Composites Display Emergent Tunable Contractility and Restructuring

Authors: Gloria Lee, Gregor Leech, Pancy Lwin, Jonathan Michel, Christopher Currie, Michael J. Rust, Jennifer L. Ross, Ryan J. McGorty, Moumita Das, Rae M. Robertson-Anderson

Abstract: The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidi… ▽ More The cytoskeleton is a model active matter system that controls diverse cellular processes from division to motility. While both active actomyosin dynamics and actin-microtubule interactions are key to the cytoskeleton's versatility and adaptability, an understanding of their interplay is lacking. Here, we couple microscale experiments with mechanistic modeling to elucidate how connectivity, rigidity, and force-generation affect emergent material properties in in vitro composites of actin, tubulin, and myosin. We use time-resolved differential dynamic microscopy and spatial image autocorrelation to show that ballistic contraction occurs in composites with sufficient flexibility and motor density, but that a critical fraction of microtubules is necessary to sustain controlled dynamics. Our active double-network models reveal that percolated actomyosin networks are essential for contraction, but that networks with comparable actin and microtubule densities can uniquely resist mechanical stresses while simultaneously supporting substantial restructuring. Our findings provide a much-needed blueprint for designing cytoskeleton-inspired materials that couple tunability with resilience and adaptability. △ Less

Submitted 8 April, 2021; originally announced April 2021.

Effect of Passive flow Control of Bifurcation Phenomenon in Sudden Expansion channel

Authors: A. Mishra, M. Jithin, A. De, M. K. Das

Abstract: In this article we describe, a numerical simulation has been performed for a channel flow with sudden expansion. Different geometric expansion ratios are considered in the current study such as 1:2, 1:3, and 1:4. The bifurcation phenomenon has been investigated for the baseline case and the critical Reynolds number is controlled using a passive modification in the channel. The geometry of sudden e… ▽ More In this article we describe, a numerical simulation has been performed for a channel flow with sudden expansion. Different geometric expansion ratios are considered in the current study such as 1:2, 1:3, and 1:4. The bifurcation phenomenon has been investigated for the baseline case and the critical Reynolds number is controlled using a passive modification in the channel. The geometry of sudden expansion channel is modified by introducing a two-dimensional plate along the center line of the channel at the expansion plane. This is one of the passive control techniques, which has been explored in the present study. The computations indicate that the critical Reynolds number of the symmetry-breaking bifurcation increases as the length of the plate increases. An empirical relation has been developed amongst the critical Reynolds number, length of control plates and expansion ratio (h/H). The critical Reynolds number predicted by the empirical relation for different plate lengths are in good agreement with computational results. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Journal ref: Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 2019

Numerical Study of Bifurcating Flow through Sudden Expansions: Effect of divergence and geometric asymmetry

Authors: Jithin M, Alok Mishra, Ashoke De, Malay K Das

Abstract: A numerical study of laminar flow through symmetric and slightly asymmetric sudden expansion, of expansion ratio 1:3, in channels with increasing cross section, is carried out using two different approaches - Conventional CFD and Lattice Boltzmann Method. The effect of divergence of walls of the channel, after a sudden expansion, on the symmetry of flow and recirculation is studied for various Rey… ▽ More A numerical study of laminar flow through symmetric and slightly asymmetric sudden expansion, of expansion ratio 1:3, in channels with increasing cross section, is carried out using two different approaches - Conventional CFD and Lattice Boltzmann Method. The effect of divergence of walls of the channel, after a sudden expansion, on the symmetry of flow and recirculation is studied for various Reynolds numbers. It is seen that the angles of the walls play an active role in disrupting the symmetry of flow. For non-parallel walls, the symmetry breaking bifurcation phenomenon no longer exists and the loss of symmetry is a gradual process. The effect of asymmetry of geometry on flow is also studied by considering two types of asymmetry - First type is at the plane of expansion where the steps on either side are of unequal heights, while the second one deals the walls of the channel are at a different inclination with the direction of inflow. The present study reveals that small asymmetry impedes the sharp transition and thus smoothens the pitchfork bifurcation. Increased asymmetry finally leads to the unique solution of the governing Equations, indicating complete loss of bifurcation pattern. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Journal ref: Int J Adv Eng Sci Appl Math, 2016

Simulation of Coupled Heat and Mass Transport With Reaction in PEM Fuel Cell Cathode using Lattice Boltzmann Method

Authors: M. Jithin, Saurabh Siddharth, Malay K. Das, Ashoke De

Abstract: Fluid, heat and species transport and oxygen reduction in the cathode of a PEM fuel cell are simulated using multi relaxation lattice Boltzmann method. Heat generation due to oxygen reduction and its effects on transport and reaction are considered. Simulations for various cell operating voltages, temperatures and flow rates with various values of porous media properties, namely, permeability, por… ▽ More Fluid, heat and species transport and oxygen reduction in the cathode of a PEM fuel cell are simulated using multi relaxation lattice Boltzmann method. Heat generation due to oxygen reduction and its effects on transport and reaction are considered. Simulations for various cell operating voltages, temperatures and flow rates with various values of porous media properties, namely, permeability, porosity, and effective porous media diffusion coefficient, are performed to study transport and operating characteristics in the electrode. It is seen that maximum output power density achievable is limited by the mass transport rate. A small increase in current density is obtained by increasing the operating temperature. However, this results in an increase in the rate of heat generation. Permeability and porosity of the gas diffusion layer do not show a significant impact on the performance in the range of values presently simulated. Higher permeability, in turn, resulted in enhancement of thermal gradients in the porous layer. A significant increase in the maximum current density obtainable is observed with increase in flow rates. The higher convection associated with high flow rate facilitates better transport of species and heat at the catalyst layer resulting in larger current density with a lesser chance of hotspot formation. Increased species diffusion coefficient also resulted in increasing the power output substantially. In addition, the fuel utilization is also improved at high diffusion rates in the porous media. The study analyses and shows the impact of various operating and material parameters affecting the performance of a PEM fuel cell with special attention on enhancing the maximum power density attainable. △ Less

Submitted 1 March, 2021; originally announced March 2021.

Journal ref: Thermal Science and Engineering Progress, 2017

Pore-scale Simulation of Shear-Thinning Fluid Flow using Lattice Boltzmann Method

Authors: Jithin M., Nimish Kumar, Ashoke De, Malay K. Das

Abstract: Present work attempts to identify the roles of flow- and geometric-variables on the scaling factor which is a necessary parameter for modeling the apparent viscosity of non-Newtonian fluid in porous media. While idealizing the porous media microstructure as arrays of circular and square cylinders, present study uses multi-relaxation time lattice Boltzmann method to conduct pore-scale simulation of… ▽ More Present work attempts to identify the roles of flow- and geometric-variables on the scaling factor which is a necessary parameter for modeling the apparent viscosity of non-Newtonian fluid in porous media. While idealizing the porous media microstructure as arrays of circular and square cylinders, present study uses multi-relaxation time lattice Boltzmann method to conduct pore-scale simulation of shear thinning non-Newtonian fluid flow. Variation in the size and inclusion ratio of the solid cylinders generates wide range of porous media with varying porosity and permeability. Present study also used stochastic reconstruction technique to generate realistic, random porous microstructures. For each case, pore-scale fluid flow simulation enables the calculation of equivalent viscosity based on the computed shear rate within the pores. It is observed that the scaling factor has strong dependence on porosity, permeability, tortuosity and the percolation threshold, while approaching the maximum value at the percolation threshold porosity. Present investigation quantifies and proposes meaningful correlations between the scaling factor and the macroscopic properties of the porous media. △ Less

Submitted 9 February, 2021; originally announced February 2021.

Journal ref: Transport in Porous Media, 2018

Numerical Investigation of Coaxial GCH4/LOx Combustion at Supercritical Pressures

Authors: Sindhuja Priyadarshini, Malay K Das, Ashoke De, Rupesh Sinha

Abstract: This article aims to numerically investigate the combustion phenomenon of coaxial gaseous CH4 LOx at supercritical pressures. The choice of turbulence model, real gas model, and chemical kinetics model are the critical parameters in numerical simulations of cryogenic combustion at high pressure. At this supercritical operating pressure, the ideal gas law does not remain valid for such cases. There… ▽ More This article aims to numerically investigate the combustion phenomenon of coaxial gaseous CH4 LOx at supercritical pressures. The choice of turbulence model, real gas model, and chemical kinetics model are the critical parameters in numerical simulations of cryogenic combustion at high pressure. At this supercritical operating pressure, the ideal gas law does not remain valid for such cases. Therefore, we have systematically carried out a comparative study to analyze the importance of real gas models, turbulence parameters, and chemical kinetics at such conditions. The comparison of real gas models with the NIST database reveals better conformity of SRK (Soave Redlich Kwong Equation of State (EoS)) model predictions with the database. Further, the computed results indicate that the Standard k-e turbulence model with modified constant captures the better flame shape and temperature peak position compared to other RANS based turbulence models while invoking the non-premixed steady b-PDF flamelet model for simulating the combustion process. Furthermore, a comparative study comparing two different chemical kinetics models indicates that the reduced Jones Lindstedt mechanism can accurately predict the flame characteristics with the least computational cost. Finally, we have studied the effect of chamber pressure and LOx inlet temperature on the flame characteristics. The flame characteristics exhibit a strong sensitivity towards the chamber pressure due to the weakening of the pseudo-boiling effect with an increase in pressure. As a consequence of lower turbulent rates of energy and mass transfer through the transcritical mixing layer, the flame spreading becomes narrower at elevated pressure and temperature, thereby yielding an increased flame length at transcritical conditions. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Journal ref: Combustion Science and Technology, 2020

Computational investigation on non-linear optical properties of hexaphyrin and core modified hexaphyrins

Authors: Sumit Naskar, Mousumi Das

Abstract: Expanded porphyrin-based (Hexaphyrins) sensitizers are promising due to their excellent light harvesting feature in dye-sensitized solar cell (DSSC). We calculated the low-lying excitations of expanded porphyrins (EPs) as hexaphyrin and core modified hexaphyrin structures using Time-Dependent Density Functional Theory. Our calculation showed the EPs (both hexaphyrin and core modified hexaphyrin) h… ▽ More Expanded porphyrin-based (Hexaphyrins) sensitizers are promising due to their excellent light harvesting feature in dye-sensitized solar cell (DSSC). We calculated the low-lying excitations of expanded porphyrins (EPs) as hexaphyrin and core modified hexaphyrin structures using Time-Dependent Density Functional Theory. Our calculation showed the EPs (both hexaphyrin and core modified hexaphyrin) have broad range of absorption band suitable for harvesting the visible and near infrared region of solar spectrum. All EPs studied here satisfy the energy condition of singlet fission (SF). SF is the process in which the theoretical limit of Shockley-Quiesser (SQ) (33\%) can be overcome in single junction solar cell. The non-linear optical properties like first hyper polarizability $β$ and second order hyper polarizability $γ$ were calculated using coupled perturbed Hartree-Fock approach. From the second order NLO properties we carried out degenerate four wave mixing (DFWM) component ($γ^{(2)}(-ω;ω,ω,-ω$)) and finally quadratic non linear refractive indices of these EPs are calculated. Calculation showed EPs are promising as organic dye for the opto-electronic applications and useful for high efficiency DSSC and also useful for potential NLO materials as their hyper polarizabilities showed higher order non linearities. △ Less

Submitted 1 November, 2020; originally announced November 2020.

BDAQ53, a versatile pixel detector readout and test system for the ATLAS and CMS HL-LHC upgrades

Authors: Michael Daas, Yannick Dieter, Jochen Dingfelder, Markus Frohne, Georgios Giakoustidis, Tomasz Hemperek, Florian Hinterkeuser, Fabian Hügging, Jens Janssen, Hans Krüger, David-Leon Pohl, Piotr Rymaszewski, Mark Standke, Tianyang Wang, Marco Vogt, Norbert Wermes

Abstract: BDAQ53 is a readout system and verification framework for hybrid pixel detector readout chips of the RD53 family. These chips are designed for the upgrade of the inner tracking detectors of the ATLAS and CMS experiments. BDAQ53 is used in applications where versatility and rapid customization are required, such as in laboratory testing environments, test beam campaigns, and permanent setups for qu… ▽ More BDAQ53 is a readout system and verification framework for hybrid pixel detector readout chips of the RD53 family. These chips are designed for the upgrade of the inner tracking detectors of the ATLAS and CMS experiments. BDAQ53 is used in applications where versatility and rapid customization are required, such as in laboratory testing environments, test beam campaigns, and permanent setups for quality control measurements. It consists of custom and commercial hardware, a Python-based software framework, and FPGA firmware. BDAQ53 is developed as open source software with both software and firmware being hosted in a public repository. △ Less

Submitted 5 October, 2020; v1 submitted 22 May, 2020; originally announced May 2020.

Comments: 6 pages, 6 figures

Interplay between quantum Zeno and anti-Zeno effects in a non-degenerate hyper-Raman nonlinear optical coupler

Authors: Moumita Das, Kishore Thapliyal, Biswajit Sen, Jan Perina, Anirban Pathak

Abstract: Quantum Zeno and anti-Zeno effects are studied in an asymmetric nonlinear optical coupler composed of a probe waveguide and a system waveguide. The system is a nonlinear waveguide operating under non-degenerate hyper-Raman process, while both the pump modes in the system are constantly interacting with the probe waveguide. The effect of the presence of probe on the temporal evolution of the system… ▽ More Quantum Zeno and anti-Zeno effects are studied in an asymmetric nonlinear optical coupler composed of a probe waveguide and a system waveguide. The system is a nonlinear waveguide operating under non-degenerate hyper-Raman process, while both the pump modes in the system are constantly interacting with the probe waveguide. The effect of the presence of probe on the temporal evolution of the system in terms of the number of photons in Stokes and anti-Stokes modes as well as phonon number is quantified as Zeno parameter. The negative (positive) values of the Zeno parameter in the specific mode are considered as the signatures of the quantum Zeno (anti-Zeno)effect in that mode of the system. It is observed that the phase mismatch in Stokes and anti-Stokes generation processes can be controlled to induce a transition between quantum Zeno and anti-Zeno effects for both off-resonant and resonant hyper-Raman process. However, in case of off-resonant hyper-Raman process in the system waveguide, the frequency detuning parameters can also be used analogously to cause the desired crossover. Further, the general nature of the physical system and the perturbative technique used here allowed us to analytically study the possibilities of observing quantum Zeno and anti-Zeno effects in a large number of special cases, including situations where the process is spontaneous, partially spontaneous and/or the system is operated under degenerate hyper-Raman process, or a simple Raman process. △ Less

Submitted 21 May, 2020; originally announced May 2020.

Comments: Dynamics of quantum Zeno and anti-Zeno effect is studied analytically in a nonlinear optical coupler which is very general in nature

Journal ref: Phys. Rev. A 103, 013713 (2021)

Simulation of heat transfer and dissipation in targets used in nuclear astrophysics experiments

Authors: Tanmoy Bar, Chinmay Basu, Mithun Das, Apurba Kumar Santra, Swarnendu Sen

Abstract: This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside… ▽ More This work presents time-dependent numerical calculations of heat generation and dissipation in targets used in high ion-beam current nuclear astrophysics experiments. The simulation is beneficial for choosing the thickness of targets, maximum ion-beam current and design setup for cooling of such targets. It is found that for the very thin target ($^{27}Al(p,p),^{12}C(p,p)$) heat generation inside target is relatively low and a fair amount of high current (few $μ$A)can be used without any melting issue. But in case of thick targets ($^{27}Al(p,γ),^{12}C(p,γ)$) cooling became essential for the survival of reaction target. △ Less

Submitted 24 February, 2020; originally announced February 2020.

Data-Driven Modeling of Electron Recoil Nucleation in PICO C$_3$F$_8$ Bubble Chambers

Authors: C. Amole, M. Ardid, I. J. Arnquist, D. M. Asner, D. Baxter, E. Behnke, M. Bressler, B. Broerman, G. Cao, C. J. Chen, S. Chen, U. Chowdhury, K. Clark, J. I. Collar, P. S. Cooper, C. B. Coutu, C. Cowles, M. Crisler, G. Crowder, N. A. Cruz-Venegas, C. E. Dahl, M. Das, S. Fallows, J. Farine, R. Filgas , et al. (54 additional authors not shown)

Abstract: The primary advantage of moderately superheated bubble chamber detectors is their simultaneous sensitivity to nuclear recoils from WIMP dark matter and insensitivity to electron recoil backgrounds. A comprehensive analysis of PICO gamma calibration data demonstrates for the first time that electron recoils in C$_3$F$_8$ scale in accordance with a new nucleation mechanism, rather than one driven by… ▽ More The primary advantage of moderately superheated bubble chamber detectors is their simultaneous sensitivity to nuclear recoils from WIMP dark matter and insensitivity to electron recoil backgrounds. A comprehensive analysis of PICO gamma calibration data demonstrates for the first time that electron recoils in C$_3$F$_8$ scale in accordance with a new nucleation mechanism, rather than one driven by a hot-spike as previously supposed. Using this semi-empirical model, bubble chamber nucleation thresholds may be tuned to be sensitive to lower energy nuclear recoils while maintaining excellent electron recoil rejection. The PICO-40L detector will exploit this model to achieve thermodynamic thresholds as low as 2.8 keV while being dominated by single-scatter events from coherent elastic neutrino-nucleus scattering of solar neutrinos. In one year of operation, PICO-40L can improve existing leading limits from PICO on spin-dependent WIMP-proton coupling by nearly an order of magnitude for WIMP masses greater than 3 GeV c$^{-2}$ and will have the ability to surpass all existing non-xenon bounds on spin-independent WIMP-nucleon coupling for WIMP masses from 3 to 40 GeV c$^{-2}$. △ Less

Submitted 25 November, 2020; v1 submitted 29 May, 2019; originally announced May 2019.

Comments: 18 pages, 12 figures

Journal ref: Phys. Rev. D 100, 082006 (2019)

A fast-switching magnet serving a spallation-driven ultracold neutron source

Authors: S. Ahmed, E. Altiere, T. Andalib, M. J. Barnes, B. Bell, C. P. Bidinosti, Y. Bylinsky, J. Chak, M. Das, C. A. Davis, F. Fischer, B. Franke, M. T. W. Gericke, P. Giampa, M. Hahn, S. Hansen-Romu, K. Hatanaka, T. Hayamizu, B. Jamieson, D. Jones, K. Katsika, S. Kawasaki, T. Kikawa, W. Klassen, A. Konaka , et al. (25 additional authors not shown)

Abstract: A fast-switching, high-repetition-rate magnet and power supply have been developed for and operated at TRIUMF, to deliver a proton beam to the new ultracold neutron (UCN) facility. The facility possesses unique operational requirements: a time-averaged beam current of 40~$μ$A with the ability to switch the beam on or off for several minutes. These requirements are in conflict with the typical oper… ▽ More A fast-switching, high-repetition-rate magnet and power supply have been developed for and operated at TRIUMF, to deliver a proton beam to the new ultracold neutron (UCN) facility. The facility possesses unique operational requirements: a time-averaged beam current of 40~$μ$A with the ability to switch the beam on or off for several minutes. These requirements are in conflict with the typical operation mode of the TRIUMF cyclotron which delivers nearly continuous beam to multiple users. To enable the creation of the UCN facility, a beam-sharing arrangement with another facility was made. The beam sharing is accomplished by the fast-switching (kicker) magnet which is ramped in 50~$μ$s to a current of 193~A, held there for approximately 1~ms, then ramped down in the same short period of time. This achieves a 12~mrad deflection which is sufficient to switch the proton beam between the two facilities. The kicker magnet relies on a high-current, low-inductance coil connected to a fast-switching power supply that is based on insulated-gate bipolar transistors (IGBTs). The design and performance of the kicker magnet system and initial beam delivery results are reported. △ Less

Submitted 11 August, 2019; v1 submitted 21 May, 2019; originally announced May 2019.

Comments: 16 pages, 21 figures

Dark Matter Search Results from the Complete Exposure of the PICO-60 C$_3$F$_8$ Bubble Chamber

Authors: C. Amole, M. Ardid, I. J. Arnquist, D. M. Asner, D. Baxter, E. Behnke, M. Bressler, B. Broerman, G. Cao, C. J. Chen, U. Chowdhury, K. Clark, J. I. Collar, P. S. Cooper, C. B. Coutu, C. Cowles, M. Crisler, G. Crowder, N. A. Cruz-Venegas, C. E. Dahl, M. Das, S. Fallows, J. Farine, I. Felis, R. Filgas , et al. (47 additional authors not shown)

Abstract: Final results are reported from operation of the PICO-60 C$_3$F$_8$ dark matter detector, a bubble chamber filled with 52 kg of C$_3$F$_8$ located in the SNOLAB underground laboratory. The chamber was operated at thermodynamic thresholds as low as 1.2 keV without loss of stability. A new blind 1404-kg-day exposure at 2.45 keV threshold was acquired with approximately the same expected total backgr… ▽ More Final results are reported from operation of the PICO-60 C$_3$F$_8$ dark matter detector, a bubble chamber filled with 52 kg of C$_3$F$_8$ located in the SNOLAB underground laboratory. The chamber was operated at thermodynamic thresholds as low as 1.2 keV without loss of stability. A new blind 1404-kg-day exposure at 2.45 keV threshold was acquired with approximately the same expected total background rate as the previous 1167-kg-day exposure at 3.3 keV. This increased exposure is enabled in part by a new optical tracking analysis to better identify events near detector walls, permitting a larger fiducial volume. These results set the most stringent direct-detection constraint to date on the WIMP-proton spin-dependent cross section at 2.5 $\times$ 10$^{-41}$ cm$^2$ for a 25 GeV WIMP, and improve on previous PICO results for 3-5 GeV WIMPs by an order of magnitude. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Comments: 9 pages, 8 figures

Journal ref: Phys. Rev. D 100, 022001 (2019)

Develo** a Bubble Chamber Particle Discriminator Using Semi-Supervised Learning

Authors: B. Matusch, C. Amole, M. Ardid, I. J. Arnquist, D. M. Asner, D. Baxter, E. Behnke, M. Bressler, B. Broerman, G. Cao, C. J. Chen, U. Chowdhury, K. Clark, J. I. Collar, P. S. Cooper, C. B. Coutu, C. Cowles, M. Crisler, G. Crowder, N. A. Cruz-Venegas, C. E. Dahl, M. Das, S. Fallows, J. Farine, I. Felis , et al. (48 additional authors not shown)

Abstract: The identification of non-signal events is a major hurdle to overcome for bubble chamber dark matter experiments such as PICO-60. The current practice of manually develo** a discriminator function to eliminate background events is difficult when available calibration data is frequently impure and present only in small quantities. In this study, several different discriminator input/preprocessing… ▽ More The identification of non-signal events is a major hurdle to overcome for bubble chamber dark matter experiments such as PICO-60. The current practice of manually develo** a discriminator function to eliminate background events is difficult when available calibration data is frequently impure and present only in small quantities. In this study, several different discriminator input/preprocessing formats and neural network architectures are applied to the task. First, they are optimized in a supervised learning context. Next, two novel semi-supervised learning algorithms are trained, and found to replicate the Acoustic Parameter (AP) discriminator previously used in PICO-60 with a mean of 97% accuracy. △ Less

Submitted 27 November, 2018; originally announced November 2018.

Comments: 27 pages, 10 figures

A beamline for fundamental neutron physics at TRIUMF

Authors: S. Ahmed, T. Andalib, M. J. Barnes, C. B. Bidinosti, Y. Bylinsky, J. Chak, M. Das, C. A. Davis, B. Franke, M. T. W. Gericke, P. Giampa, M. Hahn, S. Hansen-Romu, K. Hatanaka, B. Jamieson, D. Jones, K. Katsika, S. Kawasaki, W. Klassen, A. Konaka, E. Korkmaz, F. Kuchler, L. Kurchaninov, M. Lang, L. Lee , et al. (22 additional authors not shown)

Abstract: This article describes the new primary proton beamline 1U at TRIUMF. The purpose of this beamline is to produce ultracold neutrons (UCN) for fundamental-physics experiments. It delivers up to 40 microA of 480 MeV protons from the TRIUMF cyclotron to a tungsten spallation target and uses a fast kicker to share the beam between the Center for Molecular and Materials Science and UCN. The beamline has… ▽ More This article describes the new primary proton beamline 1U at TRIUMF. The purpose of this beamline is to produce ultracold neutrons (UCN) for fundamental-physics experiments. It delivers up to 40 microA of 480 MeV protons from the TRIUMF cyclotron to a tungsten spallation target and uses a fast kicker to share the beam between the Center for Molecular and Materials Science and UCN. The beamline has been successfully commissioned and operated with a beam current up to 10 microA, facilitating first large-scale UCN production in Canada. △ Less

Submitted 26 December, 2018; v1 submitted 1 October, 2018; originally announced October 2018.

First ultracold neutrons produced at TRIUMF

Authors: S. Ahmed, E. Altiere, T. Andalib, B. Bell, C. P. Bidinosti, E. Cudmore, M. Das, C. A. Davis, B. Franke, M. Gericke, P. Giampa, P. Gnyp, S. Hansen-Romu, K. Hatanaka, T. Hayamizu, B. Jamieson, D. Jones, S. Kawasaki, T. Kikawa, M. Kitaguchi, W. Klassen, A. Konaka, E. Korkmaz, F. Kuchler, M. Lang , et al. (28 additional authors not shown)

Abstract: We installed a source for ultracold neutrons at a new, dedicated spallation target at TRIUMF. The source was originally developed in Japan and uses a superfluid-helium converter cooled to 0.9$\,$K. During an extensive test campaign in November 2017, we extracted up to 325000 ultracold neutrons after a one-minute irradiation of the target, over three times more than previously achieved with this so… ▽ More We installed a source for ultracold neutrons at a new, dedicated spallation target at TRIUMF. The source was originally developed in Japan and uses a superfluid-helium converter cooled to 0.9$\,$K. During an extensive test campaign in November 2017, we extracted up to 325000 ultracold neutrons after a one-minute irradiation of the target, over three times more than previously achieved with this source. The corresponding ultracold-neutron density in the whole production and guide volume is 5.3$\,$cm$^{-3}$. The storage lifetime of ultracold neutrons in the source was initially 37$\,$s and dropped to 24$\,$s during the eighteen days of operation. During continuous irradiation of the spallation target, we were able to detect a sustained ultracold-neutron rate of up to 1500$\,$s$^{-1}$. Simulations of UCN production, UCN transport, temperature-dependent UCN yield, and temperature-dependent storage lifetime show excellent agreement with the experimental data and confirm that the ultracold-neutron-upscattering rate in superfluid helium is proportional to $T^7$. △ Less

Submitted 16 December, 2018; v1 submitted 10 September, 2018; originally announced September 2018.

Comments: 8 pages, 10 figures

Journal ref: Phys. Rev. C 99, 025503 (2019)

Dissociative electron attachment to sulfur dioxide : A theoretical approach

Authors: Irina Jana, Sumit Naskar, Mousumi Das, Dhananjay Nandi

Abstract: In this article, density functional theory (DFT) and natural bond orbital (NBO) calculations are performed to understand experimental observations of dissociative electron attachment (DEA) to SO$_2$. The molecular structure, fundamental vibrational frequencies with their corresponding intensities and molecular electrostatic potential (MEP) map of SO$_2$ and SO$_2^-$ are interpreted from respective… ▽ More In this article, density functional theory (DFT) and natural bond orbital (NBO) calculations are performed to understand experimental observations of dissociative electron attachment (DEA) to SO$_2$. The molecular structure, fundamental vibrational frequencies with their corresponding intensities and molecular electrostatic potential (MEP) map of SO$_2$ and SO$_2^-$ are interpreted from respective ground state optimized electronic structures calculated using DFT. The quantified MEPs and the second order perturbation energies for different oxygen lone pair (n) to $σ^*$ and $π^*$ interactions of S-O bond orbitals have been calculated by carrying out NBO analysis. The change in the electronic structure of the molecule after the attachment of a low-energy ($\leq$ 15 eV) electron, thus forming a transient negative ion, can be interpreted from the $n\rightarrowσ^*$ and $n\rightarrowπ^*$ interactions. The results of the calculations are used to interpret the dissociative electron attachment process. The dissociation of the anion SO$_2^-$ into negative and neutral fragments has been explained by interpreting the infrared spectrum and different vibration modes. It could be observed that the dissociation of SO_{2}^{-} into S^{-} occurs as a result of simultaneous symmetric stretching and bending modes of the molecular anion. While the formation of O$^-$ and SO$^-$ occurs as a result of anti-symmetric stretching of the molecular anion. The calculated symmetries of the TNI state contributing to the first resonant peak at around 5.2 eV and second resonant peak at around 7.5 eV was observed from time-dependent density functional theory calculations to be an A$_1$ and a combination of A$_1$+B$_2$ states for the two resonant peaks, respectively. These findings strongly support our recent experimental observations for DEA to SO$_2$ [Jana and Nandi, Phys. Rev. A, 97, 042706 (2018)]. △ Less

Submitted 6 July, 2018; originally announced July 2018.

Depleted Fully Monolithic Active CMOS Pixel Sensors (DMAPS) in High Resistivity 150~nm Technology for LHC

Authors: Toko Hirono, Marlon Barbero, Pierre Barrillon, Siddharth Bhat, Patrick Breugnon, Ivan Caicedo, Zongde Chen, Michael Daas, Yavuz Degerli, Fabrice Guilloux, Tomasz Hemperek, Fabian Hugging, Hans Kruger, Patrick Pangaud, Piotr Rymaszewski, Philippe Schwemling, Maxence Vandenbroucke, Tianyang Wang, Norbert Wermes

Abstract: Depleted monolithic CMOS active pixel sensors (DMAPS) have been developed in order to demonstrate their suitability as pixel detectors in the outer layers of a toroidal LHC apparatus inner tracker (ATLAS ITk) pixel detector in the high-luminosity large hadron collider (HL-LHC). Two prototypes have been fabricated using 150 nm CMOS technology on high resistivity (> 2 k$Ω$ $cm^2$) wafers. The chip s… ▽ More Depleted monolithic CMOS active pixel sensors (DMAPS) have been developed in order to demonstrate their suitability as pixel detectors in the outer layers of a toroidal LHC apparatus inner tracker (ATLAS ITk) pixel detector in the high-luminosity large hadron collider (HL-LHC). Two prototypes have been fabricated using 150 nm CMOS technology on high resistivity (> 2 k$Ω$ $cm^2$) wafers. The chip size is equivalent to that of the current ATLAS pixel detector readout chip. One of the prototypes is used for detailed characterization of the sensor and the analog readout of the DMAPS. The other is a fully monolithic DMAPS including fast readout digital logic that handles the required hit rate. In order to yield a strong homogeneous electric field within the sensor volume, thinning of the wafer was tested. The prototypes were irradiated with X-ray up to a total ionization dose (TID) of 50 Mrad and with neutrons up to non-ionizing energy loss (NIEL) of $10^{15}$ $n_{eq}/cm^2$. The analog readout circuitry maintained its performance after TID irradiation, and the hit-efficiency at > $10^7$ noise occupancy was as high as 98.9 % after NIEL irradiation. △ Less

Submitted 25 March, 2018; originally announced March 2018.

Characterization and Verification Environment for the RD53A Pixel Readout Chip in 65 nm CMOS

Authors: Marco Vogt, Hans Krüger, Tomasz Hemperek, Jens Janssen, David Leon Pohl, Michael Daas

Abstract: The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively tested to confirm if the circuit and the architecture make a solid foundation for the final pixel readout chips for the experiments at the HL-LHC. A test and dat… ▽ More The RD53 collaboration is currently designing a large scale prototype pixel readout chip in 65 nm CMOS technology for the phase 2 upgrades at the HL-LHC. The RD53A chip will be available by the end of the year 2017 and will be extensively tested to confirm if the circuit and the architecture make a solid foundation for the final pixel readout chips for the experiments at the HL-LHC. A test and data acquisition system for the RD53A chip is currently under development to perform single-chip and multi-chip module measurements. In addition, the verification of the RD53A design is performed in a dedicated simulation environment. The concept and the implementation of the test and data acquisition system and the simulation environment, which are based on a modular data acquisition and system testing framework, are presented in this work. △ Less

Submitted 1 February, 2018; v1 submitted 8 November, 2017; originally announced November 2017.

Seismic Negative Belt of Acoustic Metamaterials

Authors: Sang-Hoon Kim, Mukunda P. Das

Abstract: An earthquake-proof seismic negative belt of an artificial seismic shadow zone is introduced. The belt is composed of acoustic materials which has one of the constituent parameter between density and modulus is negative effectively. It converts the velocity of the seismic wave imaginary, and then creates a stop-band for the seismic frequency range. The belt is an attenuator of a seismic wave that… ▽ More An earthquake-proof seismic negative belt of an artificial seismic shadow zone is introduced. The belt is composed of acoustic materials which has one of the constituent parameter between density and modulus is negative effectively. It converts the velocity of the seismic wave imaginary, and then creates a stop-band for the seismic frequency range. The belt is an attenuator of a seismic wave that reduces the amplitude of the wave exponentially. Passing the belt underground, the seismic energy turns into sound and heat in air and the magnitude of the seismic wave is weakened to be defended by conventional method. Models of the negative density and negative modulus for engineering are suggested. △ Less

Submitted 30 October, 2017; originally announced October 2017.

Comments: 7 pages, 4 figures

Active Disassembly and Reassembly of Actin Networks Induces Distinct Biphasic Mechanics

Authors: Bekele J. Gurmessa, Nicholas Bitten, Dan T. Nguyen, Jennifer L. Ross, Omar A. Sale, Moumita Das, Rae M. Robertson-Anderson

Abstract: Actin is a key component of the cytoskeleton, which plays central roles in cell motility, division, growth, and tensile strength. To enable this wide range of transient mechanical processes and properties, networks of actin filaments continuously disassemble and reassemble via active de/re-polymerization. However, the question remains as to how de/re-polymerization kinetics of individual actin fil… ▽ More Actin is a key component of the cytoskeleton, which plays central roles in cell motility, division, growth, and tensile strength. To enable this wide range of transient mechanical processes and properties, networks of actin filaments continuously disassemble and reassemble via active de/re-polymerization. However, the question remains as to how de/re-polymerization kinetics of individual actin filaments translate to time-varying mechanics of dis/re-assembling networks. To address this question, to ultimately elucidate the molecular mechanisms that enable cells to exhibit a myriad of transitory mechanical properties, we couple time-resolved active microrheology with microfluidics to measure the time-varying viscoelastic moduli of entangled and crosslinked actin networks during chemically-triggered network disassembly and reassembly. We also develop a corresponding mathematical model that relates the time-evolution of filament length to the resulting time-dependent storage moduli of evolving networks. During disassembly, we find that the moduli exhibit two distinct exponential decays, with experimental time constants of $\sim$169 and $\sim$47 min, which we show arises from a phase transition from a rigid percolated network to a non-rigid regime occurring after $\sim$90 min. During reassembly, measured moduli exhibit linear increase with time for $\sim$90 min, after which steady-state values are achieved. Our theoretical model shows that reassembly mechanics are dominated by elongation kinetics, and that elongation rates are much slower than has been recently assumed. Our measurements shed much needed light onto how polymerization kinetics map to time-varying mechanics of actively evolving cytoskeleton networks, and provide a powerful platform for studying other active and dynamic systems currently under intense investigation. △ Less

Submitted 10 October, 2017; originally announced October 2017.

Comments: 15 pages, 5 figures

Self-averaging fluctuations in the chaoticity of simple fluids

Authors: Moupriya Das, Jason R. Green

Abstract: Bulk properties of equilibrium liquids are a manifestation of intermolecular forces. Here, we show how these forces imprint on dynamical fluctuations in the Lyapunov exponents for simple fluids with and without attractive forces. While the bulk of the spectrum is strongly self-averaging, the first Lyapunov exponent self-averages only weakly and at a rate that depends on the length scale of the int… ▽ More Bulk properties of equilibrium liquids are a manifestation of intermolecular forces. Here, we show how these forces imprint on dynamical fluctuations in the Lyapunov exponents for simple fluids with and without attractive forces. While the bulk of the spectrum is strongly self-averaging, the first Lyapunov exponent self-averages only weakly and at a rate that depends on the length scale of the intermolecular forces; short-range repulsive forces quantitatively dominate longer range attractive forces, which act as a weak perturbation that slows the convergence to the thermodynamic limit. Regardless of intermolecular forces, the fluctuations in the Kolmogorov-Sinai entropy rate diverge, as one expects for an extensive quantity, and the spontaneous fluctuations of these dynamical observables obey fluctuation-dissipation like relationships. Together, these results are a representation of the van der Waals picture of fluids and another lens through which we can view the liquid state. △ Less

Submitted 29 September, 2017; v1 submitted 30 May, 2017; originally announced May 2017.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 119, 115502 (2017)

Dark Matter Search Results from the PICO-60 C$_3$F$_8$ Bubble Chamber

Authors: C. Amole, M. Ardid, I. J. Arnquist, D. M. Asner, D. Baxter, E. Behnke, P. Bhattacharjee, H. Borsodi, M. Bou-Cabo, P. Campion, G. Cao, C. J. Chen, U. Chowdhury, K. Clark, J. I. Collar, P. S. Cooper, M. Crisler, G. Crowder, C. E. Dahl, M. Das, S. Fallows, J. Farine, I. Felis, R. Filgas, F. Girard , et al. (37 additional authors not shown)

Abstract: New results are reported from the operation of the PICO-60 dark matter detector, a bubble chamber filled with 52 kg of C$_3$F$_8$ located in the SNOLAB underground laboratory. As in previous PICO bubble chambers, PICO-60 C$_3$F$_8$ exhibits excellent electron recoil and alpha decay rejection, and the observed multiple-scattering neutron rate indicates a single-scatter neutron background of less th… ▽ More New results are reported from the operation of the PICO-60 dark matter detector, a bubble chamber filled with 52 kg of C$_3$F$_8$ located in the SNOLAB underground laboratory. As in previous PICO bubble chambers, PICO-60 C$_3$F$_8$ exhibits excellent electron recoil and alpha decay rejection, and the observed multiple-scattering neutron rate indicates a single-scatter neutron background of less than 1 event per month. A blind analysis of an efficiency-corrected 1167-kg-day exposure at a 3.3-keV thermodynamic threshold reveals no single-scattering nuclear recoil candidates, consistent with the predicted background. These results set the most stringent direct-detection constraint to date on the WIMP-proton spin-dependent cross section at 3.4 $\times$ 10$^{-41}$ cm$^2$ for a 30-GeV$\thinspace$c$^{-2}$ WIMP, more than one order of magnitude improvement from previous PICO results. △ Less

Submitted 2 August, 2017; v1 submitted 24 February, 2017; originally announced February 2017.

Comments: 6 pages, 6 figures

Journal ref: Phys. Rev. Lett. 118, 251301 (2017)

Neutron irradiation test of depleted CMOS pixel detector prototypes

Authors: Igor Mandić, Vladimir Cindro, Andrej Gorišek, Bojan Hiti, Gregor Kramberger, Marko Mikuž, Marko Zavrtanik, Tomasz Hemperek, Michael Daas, Fabian Hügging, Hans Krügerc, David-Leon Pohl, Norbert Wermes, Laura Gonella

Abstract: Charge collection properties of depleted CMOS pixel detector prototypes produced on p-type substrate of 2 k$Ω$cm initial resistivity (by LFoundry 150 nm process) were studied using Edge-TCT method before and after neutron irradiation. The test structures were produced for investigation of CMOS technology in tracking detectors for experiments at HL-LHC upgrade. Measurements were made with passive d… ▽ More Charge collection properties of depleted CMOS pixel detector prototypes produced on p-type substrate of 2 k$Ω$cm initial resistivity (by LFoundry 150 nm process) were studied using Edge-TCT method before and after neutron irradiation. The test structures were produced for investigation of CMOS technology in tracking detectors for experiments at HL-LHC upgrade. Measurements were made with passive detector structures in which current pulses induced on charge collecting electrodes could be directly observed. Thickness of depleted layer was estimated and studied as function of neutron irradiation fluence. An increase of depletion thickness was observed after first two irradiation steps to 1$\cdot$10$^{13}$ n/cm$^{2}$ and 5$\cdot$10$^{13}$ n/cm$^{2}$ and attributed to initial acceptor removal. At higher fluences the depletion thickness at given voltage decreases with increasing fluence because of radiation induced defects contributing to the effective space charge concentration. The behaviour is consistent with that of high resistivity silicon used for standard particle detectors. The measured thickness of the depleted layer after irradiation with 1$\cdot$10$^{15}$ n/cm$^{2}$ is more than 50 $μ$m at 100 V bias. This is sufficient to guarantee satisfactory signal/noise performance on outer layers of pixel trackers in HL-LHC experiments. △ Less

Submitted 18 January, 2017; originally announced January 2017.

Chase-and-run dynamics in cell motility and the molecular rupture of interacting active elastic dimers

Authors: David Mayett, Nicholas Bitten, Moumita Das, J. M. Schwarz

Abstract: Cell migration in morphogenesis and cancer metastasis typically involves interplay between different cell types. We construct and study a minimal, one-dimensional model comprised of two different motile cells with each cell represented as an active elastic dimer. The interaction between the two cells via cadherins is modeled as a spring that can rupture beyond a threshold force as it undergoes dyn… ▽ More Cell migration in morphogenesis and cancer metastasis typically involves interplay between different cell types. We construct and study a minimal, one-dimensional model comprised of two different motile cells with each cell represented as an active elastic dimer. The interaction between the two cells via cadherins is modeled as a spring that can rupture beyond a threshold force as it undergoes dynamic loading via the attached motile cells. We obtain a phase diagram consisting of chase-and-run dynamics and clum** dynamics as a function of the stiffness of the interaction spring and the threshold force. We also find that while feedback between cadherins and cell-substrate interaction via integrins accentuates the chase-run behavior, feedback is not necessary for it. △ Less

Submitted 29 December, 2016; originally announced December 2016.

Journal ref: Phys. Rev. E 96, 032407 (2017)