-
Effects of different loading on the bifurcation of annular elastic rods: theory vs. experiments
Authors:
Matteo Gaibotti,
Davide Bigoni,
Arsenio Cutolo,
Massimiliano Fraldi,
Andrea Piccolroaz
Abstract:
The bifurcation problem of a circular Euler-Bernoulli rod subject to a uniform radial force distribution is investigated under three distinct loading conditions: (i.) hydrostatic pressure, (ii.) centrally-directed, and (iii.) dead load. Previous studies on this apparently 'familiar' structural problem have yielded controversial results, necessitating a comprehensive clarification. This study shows…
▽ More
The bifurcation problem of a circular Euler-Bernoulli rod subject to a uniform radial force distribution is investigated under three distinct loading conditions: (i.) hydrostatic pressure, (ii.) centrally-directed, and (iii.) dead load. Previous studies on this apparently 'familiar' structural problem have yielded controversial results, necessitating a comprehensive clarification. This study shows that results previously labelled as 'correct' or 'wrong' simply refer to different external constraints, whose presence becomes necessary only for the two latter loads, (ii.) and (iii.). Moreover, the paper presents the first experimental realization of a circular rod subjected to centrally-directed loads. The experimental findings align with the theoretical predictions and show the exploitation of a new type of load acting on a continuous structural element. The feasibility of this load is demonstrated through the use of inextensible cables and opens the way to applications in flexible robotics when cables are used for actuation.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
Bimodal buckling governs human fingers luxation
Authors:
Massimiliano Fraldi,
Stefania Palumbo,
Arsenio Cutolo,
Angelo Rosario Carotenuto,
Davide Bigoni
Abstract:
Equilibrium bifurcation in natural systems can sometimes be explained as a route to stress shielding for preventing failure. Although compressive buckling has been known for a long time, its less-intuitive tensile counterpart was only recently discovered and yet never identified in living structures or organisms. Through the analysis of an unprecedented all-in-one paradigm of elastic instability,…
▽ More
Equilibrium bifurcation in natural systems can sometimes be explained as a route to stress shielding for preventing failure. Although compressive buckling has been known for a long time, its less-intuitive tensile counterpart was only recently discovered and yet never identified in living structures or organisms. Through the analysis of an unprecedented all-in-one paradigm of elastic instability, it is theoretically and experimentally shown that coexistence of two curvatures in human finger joints is the result of an optimal design by nature that exploits both compressive and tensile buckling for inducing luxation in case of traumas, so realizing a unique mechanism for protecting tissues and preventing more severe damage under extreme loads. Our findings might pave the way to conceive complex architectured and bio-inspired materials, as well as next generation artificial joint prostheses and robotic arms for bio-engineering and healthcare applications.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
Distal and non-symmetrical crack nucleation in delamination of plates via dimensionally-reduced peridynamics
Authors:
Riccardo Cavuoto,
Arsenio Cutolo,
Kaushik Dayal,
Luca Deseri,
Massimiliano Fraldi
Abstract:
Exploiting the framework of peridynamics, a dimensionally-reduced plate formulation is developed that allows for the through-thickness nucleation and growth of fracture surfaces, enabling the treatment of delamination in a lower-dimensional model. Delamination fracture nucleation and propagation are treated by choosing the kinematics to be composed of an absolutely continuous part and a zone where…
▽ More
Exploiting the framework of peridynamics, a dimensionally-reduced plate formulation is developed that allows for the through-thickness nucleation and growth of fracture surfaces, enabling the treatment of delamination in a lower-dimensional model. Delamination fracture nucleation and propagation are treated by choosing the kinematics to be composed of an absolutely continuous part and a zone where jumps in the displacements are allowed. This assumption allows the explicit derivation of the dimensionally-reduced elastic energy, which shows a hierarchy of terms characterising the stored energy in the plane element. An interpretation of the various terms of the reduced energy is shown by means of the most straightforward paradigm of bond-based peridynamics. A striking feature of the reduced energy is that, despite the small-displacement assumption, there is a coupling between the membrane and bending terms. Semi-analytical solutions for simplified settings are obtained through a minimization procedure, and a range of nonstandard behaviours such as \textit{distal} crack nucleation and curved crack path are captured by the model. Finally, convergence of the proposed peridynamic reduced model to a local elastic theory for vanishing nonlocal lengthscale is determined, giving a local cohesive model for fracture.
△ Less
Submitted 6 January, 2023;
originally announced January 2023.
-
Toughening and mechanosensing in bone: a perfectly balanced mechanism based on competing stresses
Authors:
M. Fraldi,
A. Cutolo,
A. R. Carotenuto,
S. Palumbo,
F. Bosia,
N. M. Pugno
Abstract:
Bone is a stiff and though, hierarchical and continuously evolving material that optimizes its structure to respond to mechanical stimuli, which also govern growth and remodeling processes. However, a full understanding of the underlying mechanisms responsible for the cooperation of bone toughness and biological functions, with important implications in bone ageing, osteoporosis and tissue repair,…
▽ More
Bone is a stiff and though, hierarchical and continuously evolving material that optimizes its structure to respond to mechanical stimuli, which also govern growth and remodeling processes. However, a full understanding of the underlying mechanisms responsible for the cooperation of bone toughness and biological functions, with important implications in bone ageing, osteoporosis and tissue repair, has yet to be achieved. In particular, how micro-damage nucleation, needed for tissue remodeling, does not evolve into catastrophic failure in such a stiff material, still remains a partial enigma, cement lines, interfaces and sacrificial elements alone not providing a definitive answer to the question. Here, we bring to light a novel stress-based bone toughening mechanism, calling into play the nearly-symmetrical, chiral and hierarchical architecture of the osteons, demonstrating that their arrangement simultaneously gives rise to stress states alternating in sign along the osteon radius and to localized stress amplifications, both in the tensile and compressive regimes. This unveils a previously unforeseen synergistic mechanism allowing micro-damage accumulation without propagating cracks, kindled by the contrast between crack-opening due to tensile hoop stresses and crack-stop** due to compressive stresses at the crack tips in adjacent lamellae, which seal the crack ends conferring toughness to bone well beyond that predicted by current models. Furthermore, shear stresses occur at the lamellar interfaces, contributing with fluid flow to mechanically stimulate the osteocytes and to amplify the bone signalling. These results, obtained through original exact elastic solutions and confirmed by both FE fracture analyses and experimental tests on 3D-printed osteon prototypes, contribute with another piece in the puzzle to making the rational biophysical picture of bone mechanobiology complete.
△ Less
Submitted 29 June, 2022;
originally announced June 2022.
-
Unveiling a new shear stress transfer mechanism in composites with helically wound hierarchical fibres
Authors:
A. Cutolo,
A. R. Carotenuto,
S. Palumbo,
F. Bosia,
N. M. Pugno,
M. Fraldi
Abstract:
The mechanical performance of reinforced composites is strongly influenced at different scales by the stress transferred at the matrix-fibre interfaces and at any surface where material discontinuity occurs. In particular, the mechanical response of elastomeric composites where the reinforcement is composed by cords with helically wound fibres is heavily compromised by fatigue and delamination phe…
▽ More
The mechanical performance of reinforced composites is strongly influenced at different scales by the stress transferred at the matrix-fibre interfaces and at any surface where material discontinuity occurs. In particular, the mechanical response of elastomeric composites where the reinforcement is composed by cords with helically wound fibres is heavily compromised by fatigue and delamination phenomena occurring at cord-rubber as well as at the ply interfaces, since rubber and polymeric matrices are mainly vulnerable to the accumulation of deviatoric energy due to the shear stresses transferred across the surfaces. Despite the large diffusion of composites in a vast field of applications and the mature knowledge of their behaviour, some key mechanical aspects underlying failure mechanisms are still partially unclear. For example, stress amplification and strain localization are often difficult to predict by means of analytical solutions and averaging techniques that usually conceal stress gradients. In this work, we analyse coupling between torsional and tensile loads in twisted cords, which are adopted in many cases to reinforce composites and rubbers in tire applications. We provide a model characterized by an enriched cord-matrix mechanical interplay able to theoretically explain and predict actual stress distributions responsible for the onset of delamination and fatigue-guided phenomena that are experimentally observed in these composites. In particular, we demonstrate that the assumption of a monoclinic/trigonal behaviour for the mechanical response of the hierarchical strands allows to estimate, by means of analytical formulas and a homogenization approach, hitherto neglected shear stresses at the matrix-reinforcement interface. These stresses are transferred to the neighbouring regions, leading to post-elastic behaviour and failure events.
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
Buckling Soft Tensegrities: Fickle Elasticity and Configurational Switching in Living Cells
Authors:
Massimiliano Fraldi,
Stefania Palumbo,
Angelo Rosario Carotenuto,
Arsenio Cutolo,
Luca Deseri,
Nicola Pugno
Abstract:
Tensegrity structures are special architectures made by floating compressed struts kept together by a continuous system of tensed cables. The multiplicity of shapes that tensegrity structures can assume and their intrinsic capability to be deployable and assembled, so storing (and releasing) elastic energy, have motivated their success as paradigm -pioneeringly proposed by Donald E. Ingber- to exp…
▽ More
Tensegrity structures are special architectures made by floating compressed struts kept together by a continuous system of tensed cables. The multiplicity of shapes that tensegrity structures can assume and their intrinsic capability to be deployable and assembled, so storing (and releasing) elastic energy, have motivated their success as paradigm -pioneeringly proposed by Donald E. Ingber- to explain some underlying mechanisms regulating dynamics of living cells. The interlaced structure of the cell cytoskeleton, constituted by actin and intermediate filaments and microtubules which continuously change their spatial organization and pre-stresses through polymerization/depolymerization, seems to steer migration, adhesion and cell division by obeying the tensegrity construct. Even though rough calculations lead to estimate discrepancies when comparing axial stiffness of actin filaments and microtubules and recent works have shown bent microtubules, no one has yet tried to remove the hypothesis of rigid struts in tensegrities when used to idealize the cytoskeleton mechanics. With reference to the 30-element tensegrity cell paradigm, we introduce both compressibility and bendability of the struts and rewrite the theory to take into account nonlinear elasticity of both tendons and bars, so abandoning the classical linear stress-strain assumptions. By relaxing the hypothesis of rigidity of the struts, we demonstrate that some quantitative confirmations and many extreme and somehow counterintuitive mechanical behaviors actually exploited by cells for storing/releasing energy, resisting to applied loads and deforming by modulating their overall elasticity and shape through pre-stress changes and instability-guided configurational switching, can be all theoretically found.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Tuning efficiency and sensitivity of guided resonances in photonic crystals and quasi-crystals: A comparative study
Authors:
Marco Pisco,
Armando Ricciardi,
Ilaria Gallina,
Giuseppe Castaldi,
Stefania Campopiano,
Antonello Cutolo,
Andrea Cusano,
Vincenzo Galdi
Abstract:
In this paper, we present a comparative study of the tuning efficiency and sensitivity of guided resonances (GRs) in photonic crystal (PC) holed slabs based on periodic and aperiodically-ordered unit cells, aimed at assessing the applicability of these important technology platforms to ultra-compact optical sensors and active devices. In particular, with specific reference to square-lattice period…
▽ More
In this paper, we present a comparative study of the tuning efficiency and sensitivity of guided resonances (GRs) in photonic crystal (PC) holed slabs based on periodic and aperiodically-ordered unit cells, aimed at assessing the applicability of these important technology platforms to ultra-compact optical sensors and active devices. In particular, with specific reference to square-lattice periodic PCs and aperiodically-ordered Ammann-Beenker photonic quasi-crystals, we study the effects of the hole radius, slab thickness, and refractive index on the GR sensitivity and tunability with respect to variation in the hole refractive index. Finally, we carry out a theoretical and numerical analysis in order to correlate the GR shift with the field distribution of the unperturbed (air holes) structures. Our results indicate that the spatial arrangement of the holes may strongly influence the tuning and sensitivity efficiency, and may provide new degrees of freedom and tools for the design and optimization of novel photonic devices for both sensing and telecommunication applications.
△ Less
Submitted 28 July, 2010; v1 submitted 18 June, 2010;
originally announced June 2010.