-
Correlated 0.01Hz-40Hz seismic and Newtonian noise and its impact on future gravitational-wave detectors
Authors:
Kamiel Janssens,
Guillaume Boileau,
Nelson Christensen,
Nick van Remortel,
Francesca Badaracco,
Benjamin Canuel,
Alessandro Cardini,
Andrea Contu,
Michael W. Coughlin,
Jean-Baptiste Decitre,
Rosario De Rosa,
Matteo Di Giovanni,
Domenico D'Urso,
Stéphane Gaffet,
Carlo Giunchi,
Jan Harms,
Soumen Koley,
Valentina Mangano,
Luca Naticchioni,
Marco Olivieri,
Federico Paoletti,
Davide Rozza,
Dylan O. Sabulsky,
Shahar Shani-Kadmiel,
Lucia Trozzo
Abstract:
We report correlations in underground seismic measurements with horizontal separations of several hundreds of meters to a few kilometers in the frequency range 0.01Hz to 40Hz. These seismic correlations could threaten science goals of planned interferometric gravitational-wave detectors such as the Einstein Telescope as well as atom interferometers such as MIGA and ELGAR. We use seismic measuremen…
▽ More
We report correlations in underground seismic measurements with horizontal separations of several hundreds of meters to a few kilometers in the frequency range 0.01Hz to 40Hz. These seismic correlations could threaten science goals of planned interferometric gravitational-wave detectors such as the Einstein Telescope as well as atom interferometers such as MIGA and ELGAR. We use seismic measurements from four different sites, i.e. the former Homestake mine (USA) as well as two candidate sites for the Einstein Telescope, Sos Enattos (IT) and Euregio Maas-Rhein (NL-BE-DE) and the site housing the MIGA detector, LSBB (FR). At all sites, we observe significant coherence for at least 50% of the time in the majority of the frequency region of interest. Based on the observed correlations in the seismic fields, we predict levels of correlated Newtonian noise from body waves. We project the effect of correlated Newtonian noise from body waves on the capabilities of the triangular design of the Einstein Telescope's to observe an isotropic gravitational-wave background (GWB) and find that, even in case of the most quiet site, its sensitivity will be affected up to $\sim$20Hz. The resolvable amplitude of a GWB signal with a negatively sloped power-law behaviour would be reduced by several orders of magnitude. However, the resolvability of a power-law signal with a slope of e.g. $α=0$ ($α=2/3$) would be more moderately affected by a factor $\sim$ 6-9 ($\sim$3-4) in case of a low noise environment. Furthermore, we bolster confidence in our results by showing that transient noise features have a limited impact on the presented results.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Collapsars as Sites of r-process Nucleosynthesis: Systematic Near-Infrared Follow-up of Type Ic-BL Supernovae
Authors:
Shreya Anand,
Jennifer Barnes,
Sheng Yang,
Mansi M. Kasliwal,
Michael W. Coughlin,
Jesper Sollerman,
Kishalay De,
Christoffer Fremling,
Alessandra Corsi,
Anna Y. Q. Ho,
Arvind Balasubramanian,
Conor Omand,
Gokul P. Srinivasaragavan,
S. Bradley Cenko,
Tomas Ahumada,
Igor Andreoni,
Aishwarya Dahiwale,
Kaustav Kashyap Das,
Jacob Jencson,
Viraj Karambelkar,
Harsh Kumar,
Brian D. Metzger,
Daniel Perley,
Nikhil Sarin,
Tassilo Schweyer
, et al. (19 additional authors not shown)
Abstract:
One of the open questions following the discovery of GW170817 is whether neutron star mergers are the only astrophysical sites capable of producing $r$-process elements. Simulations have shown that 0.01-0.1M$_\odot$ of $r$-process material could be generated in the outflows originating from the accretion disk surrounding the rapidly rotating black hole that forms as a remnant to both neutron star…
▽ More
One of the open questions following the discovery of GW170817 is whether neutron star mergers are the only astrophysical sites capable of producing $r$-process elements. Simulations have shown that 0.01-0.1M$_\odot$ of $r$-process material could be generated in the outflows originating from the accretion disk surrounding the rapidly rotating black hole that forms as a remnant to both neutron star mergers and collapsing massive stars associated with long-duration gamma-ray bursts (collapsars). The hallmark signature of $r$-process nucleosynthesis in the binary neutron star merger GW170817 was its long-lasting near-infrared emission, thus motivating a systematic photometric study of the light curves of broadlined stripped-envelope (Ic-BL) supernovae (SNe) associated with collapsars. We present the first systematic study of 25 SNe Ic-BL -- including 18 observed with the Zwicky Transient Facility and 7 from the literature -- in the optical/near-infrared bands to determine what quantity of $r$-process material, if any, is synthesized in these explosions. Using semi-analytic models designed to account for $r$-process production in SNe Ic-BL, we perform light curve fitting to derive constraints on the $r$-process mass for these SNe. We also perform independent light curve fits to models without $r$-process. We find that the $r$-process-free models are a better fit to the light curves of the objects in our sample. Thus we find no compelling evidence of $r$-process enrichment in any of our objects. Further high-cadence infrared photometric studies and nebular spectroscopic analysis would be sensitive to smaller quantities of $r$-process ejecta mass or indicate whether all collapsars are completely devoid of $r$-process nucleosynthesis.
△ Less
Submitted 12 February, 2024; v1 submitted 17 February, 2023;
originally announced February 2023.
-
Correlated 1-1000 Hz magnetic field fluctuations from lightning over earth-scale distances and their impact on gravitational wave searches
Authors:
Kamiel Janssens,
Matthew Ball,
Robert M. S. Schofield,
Nelson Christensen,
Raymond Frey,
Nick van Remortel,
Sharan Banagiri,
Michael W. Coughlin,
Anamaria Effler,
Mark Gołkowski,
Jerzy Kubisz,
Michał Ostrowski
Abstract:
We report Earth-scale distance magnetic correlations from lightning strokes in the frequency range 1-1000 Hz at several distances ranging from 1100 to 9000 km. Noise sources which are correlated on Earth-scale distances can affect future searches for gravitational-wave signals with ground-based gravitational-wave interferometric detectors. We consider the impact of correlations from magnetic field…
▽ More
We report Earth-scale distance magnetic correlations from lightning strokes in the frequency range 1-1000 Hz at several distances ranging from 1100 to 9000 km. Noise sources which are correlated on Earth-scale distances can affect future searches for gravitational-wave signals with ground-based gravitational-wave interferometric detectors. We consider the impact of correlations from magnetic field fluctuations on gravitational-wave searches due to Schumann resonances ($<$50 Hz) as well as higher frequencies ($>$100 Hz). We demonstrate that individual lightning strokes are a likely source for the observed correlations in the magnetic field fluctuations at gravitational-wave observatories and discuss some of their characteristics. Furthermore, we predict their impact on searches for an isotropic gravitational-wave background, as well as for searches looking for short-duration transient gravitational waves, both unmodeled signals (bursts) as well as modeled signals (compact binary coalescence). Whereas the recent third observing run by LIGO and Virgo was free of an impact from correlated magnetic field fluctuations, future runs could be affected. For example, at current magnetic coupling levels, neutron star inspirals in third generation detectors are likely to be contaminated by multiple correlated lightning glitches. We suggest that future detector design should consider reducing lightning coupling by, for example, reducing the lightning-induced beam tube currents that pass through sensitive magnetic coupling regions in current detectors. We also suggest that the diurnal and seasonal variation in lightning activity may be useful in discriminating between detector correlations that are produced by gravitational waves and those produced by lightning.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Physics Community Needs, Tools, and Resources for Machine Learning
Authors:
Philip Harris,
Erik Katsavounidis,
William Patrick McCormack,
Dylan Rankin,
Yongbin Feng,
Abhijith Gandrakota,
Christian Herwig,
Burt Holzman,
Kevin Pedro,
Nhan Tran,
Tingjun Yang,
Jennifer Ngadiuba,
Michael Coughlin,
Scott Hauck,
Shih-Chieh Hsu,
Elham E Khoda,
Deming Chen,
Mark Neubauer,
Javier Duarte,
Georgia Karagiorgi,
Mia Liu
Abstract:
Machine learning (ML) is becoming an increasingly important component of cutting-edge physics research, but its computational requirements present significant challenges. In this white paper, we discuss the needs of the physics community regarding ML across latency and throughput regimes, the tools and resources that offer the possibility of addressing these needs, and how these can be best utiliz…
▽ More
Machine learning (ML) is becoming an increasingly important component of cutting-edge physics research, but its computational requirements present significant challenges. In this white paper, we discuss the needs of the physics community regarding ML across latency and throughput regimes, the tools and resources that offer the possibility of addressing these needs, and how these can be best utilized and accessed in the coming years.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Hardware-accelerated Inference for Real-Time Gravitational-Wave Astronomy
Authors:
Alec Gunny,
Dylan Rankin,
Jeffrey Krupa,
Muhammed Saleem,
Tri Nguyen,
Michael Coughlin,
Philip Harris,
Erik Katsavounidis,
Steven Timm,
Burt Holzman
Abstract:
The field of transient astronomy has seen a revolution with the first gravitational-wave detections and the arrival of multi-messenger observations they enabled. Transformed by the first detection of binary black hole and binary neutron star mergers, computational demands in gravitational-wave astronomy are expected to grow by at least a factor of two over the next five years as the global network…
▽ More
The field of transient astronomy has seen a revolution with the first gravitational-wave detections and the arrival of multi-messenger observations they enabled. Transformed by the first detection of binary black hole and binary neutron star mergers, computational demands in gravitational-wave astronomy are expected to grow by at least a factor of two over the next five years as the global network of kilometer-scale interferometers are brought to design sensitivity. With the increase in detector sensitivity, real-time delivery of gravitational-wave alerts will become increasingly important as an enabler of multi-messenger followup. In this work, we report a novel implementation and deployment of deep learning inference for real-time gravitational-wave data denoising and astrophysical source identification. This is accomplished using a generic Inference-as-a-Service model that is capable of adapting to the future needs of gravitational-wave data analysis. Our implementation allows seamless incorporation of hardware accelerators and also enables the use of commercial or private (dedicated) as-a-service computing. Based on our results, we propose a paradigm shift in low-latency and offline computing in gravitational-wave astronomy. Such a shift can address key challenges in peak-usage, scalability and reliability, and provide a data analysis platform particularly optimized for deep learning applications. The achieved sub-millisecond scale latency will also be relevant for any machine learning-based real-time control systems that may be invoked in the operation of near-future and next generation ground-based laser interferometers, as well as the front-end collection, distribution and processing of data from such instruments.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
Improving the Robustness of the Advanced LIGO Detectors to Earthquakes
Authors:
Eyal Schwartz,
A Pele,
J Warner,
B Lantz,
J Betzwieser,
K L Dooley,
S Biscans,
M Coughlin,
N Mukund,
R Abbott,
C Adams,
R X Adhikari,
A Ananyeva,
S Appert,
K Arai,
J S Areeda,
Y Asali,
S M Aston,
C Austin,
A M Baer,
M Ball,
S W Ballmer,
S Banagiri,
D Barker,
L Barsotti
, et al. (174 additional authors not shown)
Abstract:
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti…
▽ More
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μ\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Noise Reduction in Gravitational-wave Data via Deep Learning
Authors:
Rich Ormiston,
Tri Nguyen,
Michael Coughlin,
Rana X. Adhikari,
Erik Katsavounidis
Abstract:
With the advent of gravitational wave astronomy, techniques to extend the reach of gravitational wave detectors are desired. In addition to the stellar-mass black hole and neutron star mergers already detected, many more are below the surface of the noise, available for detection if the noise is reduced enough. Our method (DeepClean) applies machine learning algorithms to gravitational wave detect…
▽ More
With the advent of gravitational wave astronomy, techniques to extend the reach of gravitational wave detectors are desired. In addition to the stellar-mass black hole and neutron star mergers already detected, many more are below the surface of the noise, available for detection if the noise is reduced enough. Our method (DeepClean) applies machine learning algorithms to gravitational wave detector data and data from on-site sensors monitoring the instrument to reduce the noise in the time-series due to instrumental artifacts and environmental contamination. This framework is generic enough to subtract linear, non-linear, and non-stationary coupling mechanisms. It may also provide handles in learning about the mechanisms which are not currently understood to be limiting detector sensitivities. The robustness of the noise reduction technique in its ability to efficiently remove noise with no unintended effects on gravitational-wave signals is also addressed through software signal injection and parameter estimation of the recovered signal. It is shown that the optimal SNR ratio of the injected signal is enhanced by $\sim 21.6\%$ and the recovered parameters are consistent with the injected set. We present the performance of this algorithm on linear and non-linear noise sources and discuss its impact on astrophysical searches by gravitational wave detectors.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Coherence-based approaches for estimating the composition of the seismic wavefield
Authors:
M. Coughlin,
J. Harms,
D. C. Bowden,
P. Meyers,
V. C. Tsai,
V. Mandic,
G. Pavlis,
T. Prestegard
Abstract:
As new techniques exploiting the Earth's ambient seismic noise field are developed and applied, such as for the observation of temporal changes in seismic velocity structure, it is crucial to quantify the precision with which wave-type measurements can be made. This work uses array data at the Homestake mine in Lead, South Dakota and an array at Sweetwater, Texas to consider two aspects that contr…
▽ More
As new techniques exploiting the Earth's ambient seismic noise field are developed and applied, such as for the observation of temporal changes in seismic velocity structure, it is crucial to quantify the precision with which wave-type measurements can be made. This work uses array data at the Homestake mine in Lead, South Dakota and an array at Sweetwater, Texas to consider two aspects that control this precision: the types of seismic wave contributing to the ambient noise field at microseism frequencies and the effect of array geometry. Both are quantified using measurements of wavefield coherence between stations in combination with Wiener filters. We find a strong seasonal change between body-wave and surface-wave content. Regarding the inclusion of underground stations, we quantify the lower limit to which the ambient noise field can be characterized and reproduced; the applications of the Wiener filters are about 4 times more successful in reproducing ambient noise waveforms when underground stations are included in the array, resulting in predictions of seismic timeseries with less than a 1\% residual, and are ultimately limited by the geometry and aperture of the array, as well as by temporal variations in the seismic field. We discuss the implications of these results for the geophysics community performing ambient seismic noise studies, as well as for the cancellation of seismic Newtonian gravity noise in ground-based, sub-Hz, gravitational-wave detectors.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Control strategy to limit duty cycle impact of earthquakes on the LIGO gravitational-wave detectors
Authors:
S. Biscans,
J. Warner,
R. Mittleman,
C. Buchanan,
M. Coughlin,
M. Evans,
H. Gabbard,
J. Harms,
B. Lantz,
N. Mukund,
A. Pele,
C. Pezerat,
P. Picart,
H. Radkins,
T. Shaffer
Abstract:
Advanced gravitational-wave detectors such as the Laser Interferometer Gravitational-Wave Observatories (LIGO) require an unprecedented level of isolation from the ground. When in operation, they are expected to observe changes in the space-time continuum of less than one thousandth of the diameter of a proton. Strong teleseismic events like earthquakes disrupt the proper functioning of the detect…
▽ More
Advanced gravitational-wave detectors such as the Laser Interferometer Gravitational-Wave Observatories (LIGO) require an unprecedented level of isolation from the ground. When in operation, they are expected to observe changes in the space-time continuum of less than one thousandth of the diameter of a proton. Strong teleseismic events like earthquakes disrupt the proper functioning of the detectors, and result in a loss of data until the detectors can be returned to their operating states. An earthquake early-warning system, as well as a prediction model have been developed to help understand the impact of earthquakes on LIGO. This paper describes a control strategy to use this early-warning system to reduce the LIGO downtime by 30%. It also presents a plan to implement this new earthquake configuration in the LIGO automation system.
△ Less
Submitted 11 July, 2017;
originally announced July 2017.
-
Low Frequency Tilt Seismology with a Precision Ground Rotation Sensor
Authors:
M. P. Ross,
K. Venkateswara,
C. A. Hagedorn,
J. H. Gundlach,
J. S. Kissel,
J. Warner,
H. Radkins,
T. J. Shaffer,
M. W. Coughlin,
P. Bodin
Abstract:
We describe measurements of the rotational component of teleseismic surface waves using an inertial high-precision ground-rotation-sensor installed at the LIGO Hanford Observatory (LHO). The sensor has a noise floor of 0.4 nrad$/ \sqrt{\rm Hz}$ at 50 mHz and a translational coupling of less than 1 $μ$rad/m enabling translation-free measurement of small rotations. We present observations of the rot…
▽ More
We describe measurements of the rotational component of teleseismic surface waves using an inertial high-precision ground-rotation-sensor installed at the LIGO Hanford Observatory (LHO). The sensor has a noise floor of 0.4 nrad$/ \sqrt{\rm Hz}$ at 50 mHz and a translational coupling of less than 1 $μ$rad/m enabling translation-free measurement of small rotations. We present observations of the rotational motion from Rayleigh waves of six teleseismic events from varied locations and with magnitudes ranging from M6.7 to M7.9. These events were used to estimate phase dispersion curves which shows agreement with a similar analysis done with an array of three STS-2 seismometers also located at LHO.
△ Less
Submitted 25 July, 2017; v1 submitted 10 July, 2017;
originally announced July 2017.
-
Globally coherent short duration magnetic field transients and their effect on ground based gravitational-wave detectors
Authors:
Izabela Kowalska-Leszczynska,
Marie-Anne Bizouard,
Tomasz Bulik,
Nelson Christensen,
Michael Coughlin,
Mark Gołkowski,
Jerzy Kubisz,
Andrzej Kulak,
Janusz Mlynarczyk,
Florent Robinet,
Maximilian Rohde
Abstract:
It has been recognized that the magnetic fields from the Schumann resonances could affect the search for a stochastic gravitational-wave background by LIGO and Virgo. Presented here are the observations of short duration magnetic field transients that are coincident in the magnetometers at the LIGO and Virgo sites. Data from low-noise magnetometers in Poland and Colorado, USA, are also used and sh…
▽ More
It has been recognized that the magnetic fields from the Schumann resonances could affect the search for a stochastic gravitational-wave background by LIGO and Virgo. Presented here are the observations of short duration magnetic field transients that are coincident in the magnetometers at the LIGO and Virgo sites. Data from low-noise magnetometers in Poland and Colorado, USA, are also used and show short duration magnetic transients of global extent. We measure at least 2.3 coincident (between Poland and Colorado) magnetic transient events per day where one of the pulses exceeds 200 pT. Given the recently measured values of the magnetic coupling to differential arm motion for Advanced LIGO, there would be a few events per day that would appear simultaneously at the gravitational-wave detector sites and could move the test masses of order $10^{-18}$ m. We confirm that in the advanced detector era short duration transient gravitational-wave searches must account for correlated magnetic field noise in the global detector network.
△ Less
Submitted 4 December, 2016;
originally announced December 2016.
-
Limiting the effects of earthquakes on gravitational-wave interferometers
Authors:
Michael Coughlin,
Paul Earle,
Jan Harms,
Sebastien Biscans,
Christopher Buchanan,
Eric Coughlin,
Fred Donovan,
Jeremy Fee,
Hunter Gabbard,
Michelle Guy,
Nikhil Mukund,
Matthew Perry
Abstract:
Ground-based gravitational wave interferometers such as the Laser Interferometer Gravitational-wave Observatory (LIGO) are susceptible to high-magnitude teleseismic events, which can interrupt their operation in science mode and significantly reduce the duty cycle. It can take several hours for a detector to stabilize enough to return to its nominal state for scientific observations. The down time…
▽ More
Ground-based gravitational wave interferometers such as the Laser Interferometer Gravitational-wave Observatory (LIGO) are susceptible to high-magnitude teleseismic events, which can interrupt their operation in science mode and significantly reduce the duty cycle. It can take several hours for a detector to stabilize enough to return to its nominal state for scientific observations. The down time can be reduced if advance warning of impending shaking is received and the impact is suppressed in the isolation system with the goal of maintaining stable operation even at the expense of increased instrumental noise. Here we describe an early warning system for modern gravitational-wave observatories. The system relies on near real-time earthquake alerts provided by the U.S. Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA). Hypocenter and magnitude information is generally available in 5 to 20 minutes of a significant earthquake depending on its magnitude and location. The alerts are used to estimate arrival times and ground velocities at the gravitational-wave detectors. In general, 90\% of the predictions for ground-motion amplitude are within a factor of 5 of measured values. The error in both arrival time and ground-motion prediction introduced by using preliminary, rather than final, hypocenter and magnitude information is minimal. By using a machine learning algorithm, we develop a prediction model that calculates the probability that a given earthquake will prevent a detector from taking data. Our initial results indicate that by using detector control configuration changes, we could prevent interruption of operation from 40-100 earthquake events in a 6-month time-period.
△ Less
Submitted 2 February, 2017; v1 submitted 29 November, 2016;
originally announced November 2016.
-
Subtraction of correlated noise in global networks of gravitational-wave interferometers
Authors:
Michael W. Coughlin,
Nelson L. Christensen,
Rosario De Rosa,
Irene Fiori,
Mark Gołkowski,
Melissa Guidry,
Jan Harms,
Jerzy Kubisz,
Andrzej Kulak,
Janusz Mlynarczyk,
Federico Paoletti,
Eric Thrane
Abstract:
The recent discovery of merging black holes suggests that a stochastic gravitational-wave background is within reach of the advanced detector network operating at design sensitivity. However, correlated magnetic noise from Schumann resonances threatens to contaminate observation of a stochastic background. In this paper, we report on the first effort to eliminate intercontinental correlated noise…
▽ More
The recent discovery of merging black holes suggests that a stochastic gravitational-wave background is within reach of the advanced detector network operating at design sensitivity. However, correlated magnetic noise from Schumann resonances threatens to contaminate observation of a stochastic background. In this paper, we report on the first effort to eliminate intercontinental correlated noise from Schumann resonances using Wiener filtering. Using magnetometers as proxies for gravitational-wave detectors, we demonstrate as much as a factor of two reduction in the coherence between magnetometers on different continents. While much work remains to be done, our results constitute a proof-of-principle and motivate follow-up studies with a dedicated array of magnetometers.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Real-time earthquake warning for astronomical observatories
Authors:
Michael Coughlin,
Christopher Stubbs,
Sergio Barrientos,
Chuck Claver,
Jan Harms,
Christopher Smith,
Michael Warner
Abstract:
Early earthquake warning is a rapidly develo** capability that has significant ramifications for many fields, including astronomical observatories. In this work, we describe the susceptibility of astronomical facilities to seismic events, including large telescopes as well as second-generation ground-based gravitational-wave interferometers. We describe the potential warning times for observator…
▽ More
Early earthquake warning is a rapidly develo** capability that has significant ramifications for many fields, including astronomical observatories. In this work, we describe the susceptibility of astronomical facilities to seismic events, including large telescopes as well as second-generation ground-based gravitational-wave interferometers. We describe the potential warning times for observatories from current seismic networks and propose locations for future seismometers to maximize warning times.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
-
Wiener filtering with a seismic underground array at the Sanford Underground Research Facility
Authors:
Michael Coughlin,
Jan Harms,
Nelson Christensen,
Vladimir Dergachev,
Riccardo DeSalvo,
Shivaraj Kandhasamy,
Vuk Mandic
Abstract:
A seismic array has been deployed at the Sanford Underground Research Facility in the former Homestake mine, South Dakota, to study the underground seismic environment. This includes exploring the advantages of constructing a third-generation gravitational-wave detector underground. A major noise source for these detectors would be Newtonian noise, which is induced by fluctuations in the local gra…
▽ More
A seismic array has been deployed at the Sanford Underground Research Facility in the former Homestake mine, South Dakota, to study the underground seismic environment. This includes exploring the advantages of constructing a third-generation gravitational-wave detector underground. A major noise source for these detectors would be Newtonian noise, which is induced by fluctuations in the local gravitational field. The hope is that a combination of a low-noise seismic environment and coherent noise subtraction using seismometers in the vicinity of the detector could suppress the Newtonian noise to below the projected noise floor for future gravitational-wave detectors. In this paper, we use Wiener filtering techniques to subtract coherent noise in a seismic array in the frequency band 0.05 -- 1\,Hz. This achieves more than an order of magnitude noise cancellation over a majority of this band. We show how this subtraction would benefit proposed future low-frequency gravitational wave detectors. The variation in the Wiener filter coefficients over the course of the day, including how local activities impact the filter, is analyzed. We also study the variation in coefficients over the course of a month, showing the stability of the filter with time. How varying the filter order affects the subtraction performance is also explored. It is shown that optimizing filter order can significantly improve subtraction of seismic noise, which gives hope for future gravitational-wave detectors to address Newtonian noise.
△ Less
Submitted 19 August, 2014; v1 submitted 30 March, 2014;
originally announced March 2014.
-
Global characterization of seismic noise with broadband seismometers
Authors:
Michael William Coughlin,
Jan Harms
Abstract:
In this paper, we present an analysis of seismic spectra that were calculated from all broadband channels (BH?) made available through IRIS, NIED F-net and Orfeus servers covering the past five years and beyond. A general characterization of the data is given in terms of spectral histograms and data-availability plots. We show that the spectral information can easily be categorized in time and reg…
▽ More
In this paper, we present an analysis of seismic spectra that were calculated from all broadband channels (BH?) made available through IRIS, NIED F-net and Orfeus servers covering the past five years and beyond. A general characterization of the data is given in terms of spectral histograms and data-availability plots. We show that the spectral information can easily be categorized in time and regions. Spectral histograms indicate that seismic stations exist in Africa, Australia and Antarctica that measure spectra significantly below the global low-noise models above 1 Hz. We investigate world-wide coherence between the seismic spectra and other data sets like proximity to cities, station elevation, earthquake frequency, and wind speeds. Elevation of seismic stations in the US is strongly anti-correlated with seismic noise near 0.2 Hz and again above 1.5 Hz. Urban settlements are shown to produce excess noise above 1 Hz, but correlation curves look very different depending on the region. It is shown that wind speeds can be strongly correlated with seismic noise above 0.1 Hz, whereas earthquakes produce seismic noise that shows most clearly in correlation around 80 mHz.
△ Less
Submitted 22 February, 2012;
originally announced February 2012.
-
Seismic topographic scattering in the context of GW detector site selection
Authors:
Michael Coughlin,
Jan Harms
Abstract:
In this paper, we present a calculation of seismic scattering from irregular surface topography in the Born approximation. Based on US-wide topographic data, we investigate topographic scattering at specific sites to demonstrate its impact on Newtonian-noise estimation and subtraction for future gravitational-wave detectors. We find that topographic scattering at a comparatively flat site in Orego…
▽ More
In this paper, we present a calculation of seismic scattering from irregular surface topography in the Born approximation. Based on US-wide topographic data, we investigate topographic scattering at specific sites to demonstrate its impact on Newtonian-noise estimation and subtraction for future gravitational-wave detectors. We find that topographic scattering at a comparatively flat site in Oregon would not pose any problems, whereas scattering at a second site in Montana leads to significant broadening of wave amplitudes in wavenumber space that would make Newtonian-noise subtraction very challenging. Therefore, it is shown that topographic scattering should be included as criterion in the site-selection process of future low-frequency gravitational-wave detectors.
△ Less
Submitted 6 February, 2012; v1 submitted 27 November, 2011;
originally announced November 2011.
-
Characterization of the seismic environment at the Sanford Underground Laboratory, South Dakota
Authors:
Jan Harms,
Fausto Acernese,
Fabrizio Barone,
Imre Bartos,
Mark Beker,
J. F. J. van den Brand,
Nelson Christensen,
Michael Coughlin,
Riccardo DeSalvo,
Steven Dorsher,
Jaret Heise,
Shivaraj Kandhasamy,
Vuk Mandic,
Szabolcs Márka,
Guido Müller,
Luca Naticchioni,
Thomas O'Keefe,
David S. Rabeling,
Angelo Sajeva,
Tom Trancynger,
Vinzenz Wand
Abstract:
An array of seismometers is being developed at the Sanford Underground Laboratory, the former Homestake mine, in South Dakota to study the properties of underground seismic fields and Newtonian noise, and to investigate the possible advantages of constructing a third-generation gravitational-wave detector underground. Seismic data were analyzed to characterize seismic noise and disturbances. Exter…
▽ More
An array of seismometers is being developed at the Sanford Underground Laboratory, the former Homestake mine, in South Dakota to study the properties of underground seismic fields and Newtonian noise, and to investigate the possible advantages of constructing a third-generation gravitational-wave detector underground. Seismic data were analyzed to characterize seismic noise and disturbances. External databases were used to identify sources of seismic waves: ocean-wave data to identify sources of oceanic microseisms, and surface wind-speed data to investigate correlations with seismic motion as a function of depth. In addition, sources of events contributing to the spectrum at higher frequencies are characterized by studying the variation of event rates over the course of a day. Long-term observations of spectral variations provide further insight into the nature of seismic sources. Seismic spectra at three different depths are compared, establishing the 4100-ft level as a world-class low seismic-noise environment.
△ Less
Submitted 3 June, 2010;
originally announced June 2010.
