-
First test beam measurement of the 4D resolution of an RSD 450 microns pitch pixel matrix connected to a FAST2 ASIC
Authors:
L. Menzio,
F. Siviero,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
T. Croci,
M. Ferrero,
C. Hanna,
L. Lanteri,
S. Mazza,
R. Mulargiaa,
H-F W. Sadrozinski,
A. Seiden,
V. Sola,
R. Whitea,
M. Wilder
Abstract:
This paper reports on the spatial and temporal resolutions of an RSD 450 microns pitch pixels array measured at the DESY test beam facility. RSDs, Resistive Silicon Detectors, also known as AC-LGAD, achieve excellent position and temporal resolution by exploiting charge sharing among neighboring electrodes. The RSD matrix used in this study is part of the second FBK RSD production, RSD2, and it is…
▽ More
This paper reports on the spatial and temporal resolutions of an RSD 450 microns pitch pixels array measured at the DESY test beam facility. RSDs, Resistive Silicon Detectors, also known as AC-LGAD, achieve excellent position and temporal resolution by exploiting charge sharing among neighboring electrodes. The RSD matrix used in this study is part of the second FBK RSD production, RSD2, and it is composed of 450 microns pitch pixel with cross-shaped electrodes. A 7-pixel matrix was read out by the FAST2 ASIC, a 16-channel amplifier fully custom ASIC developed by INFN Torino using the 110 nm CMOS technology. The total area covered by the matrix is about 1.5 mm$^2$. The position resolution reached in this test is 15 microns, about 4\% of the pitch. The temporal resolution achieved in this work is 60 ps, dominated by the FAST2 resolution. The work also demonstrates that RSD sensors with cross-shaped electrodes achieve 100% fill factor and homogenous resolutions over the whole matrix surface, making them a suitable choice for 4D tracking applications.
△ Less
Submitted 17 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Detection of Seismic Infrasonic Elephant Rumbles Using Spectrogram-Based Machine Learning
Authors:
A. M. J. V. Costa,
C. S. Pallikkonda,
H. H. R. Hiroshan,
G. R. U. Y. Gamlath,
S. R. Munasinghe,
C. U. S. Edussooriya
Abstract:
This paper presents an effective method of identifying elephant rumbles in infrasonic seismic signals. The design and implementation of electronic circuitry to amplify, filter, and digitize the seismic signals captured through geophones are presented. A collection of seismic infrasonic elephant rumbles was collected at a free-ranging area of an elephant orphanage in Sri Lanka. The seismic rumbles…
▽ More
This paper presents an effective method of identifying elephant rumbles in infrasonic seismic signals. The design and implementation of electronic circuitry to amplify, filter, and digitize the seismic signals captured through geophones are presented. A collection of seismic infrasonic elephant rumbles was collected at a free-ranging area of an elephant orphanage in Sri Lanka. The seismic rumbles were converted to spectrograms, and several methods were used for spectral feature extraction. Using LasyPredict, the features extracted using different methods were fed into their corresponding machine-learning algorithms to train them for automatic seismic rumble identification. It was found that the Mel frequency cepstral coefficient (MFCC) together with the Ridge classifier machine learning algorithm produced the best performance in identifying seismic elephant rumbles. A novel method for denoising the spectrum that leads to enhanced accuracy in identifying seismic rumbles is also presented.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
SmoQyDQMC.jl: A flexible implementation of determinant quantum Monte Carlo for Hubbard and electron-phonon interactions
Authors:
Benjamin Cohen-Stead,
Sohan Malkaruge Costa,
James Neuhaus,
Andy Tanjaroon Ly,
Yutan Zhang,
Richard Scalettar,
Kipton Barros,
Steven Johnston
Abstract:
We introduce the SmoQyDQMC.jl package, a Julia implementation of the determinant quantum Monte Carlo algorithm. SmoQyDQMC.jl supports generalized tight-binding Hamiltonians with on-site Hubbard and generalized electron-phonon interactions, including non-linear $e$-ph coupling and anharmonic lattice potentials. Our implementations use hybrid Monte Carlo methods with exact forces for sampling the ph…
▽ More
We introduce the SmoQyDQMC.jl package, a Julia implementation of the determinant quantum Monte Carlo algorithm. SmoQyDQMC.jl supports generalized tight-binding Hamiltonians with on-site Hubbard and generalized electron-phonon interactions, including non-linear $e$-ph coupling and anharmonic lattice potentials. Our implementations use hybrid Monte Carlo methods with exact forces for sampling the phonon fields, enabling efficient simulation of low-energy phonon branches, including acoustic phonons. The SmoQyDQMC.jl package also uses a flexible scripting interface, allowing users to adapt it to different workflows and interface with other software packages in the Julia ecosystem. The code for this package can be downloaded from our GitHub repository at https://github.com/SmoQySuite/SmoQyDQMC.jl or installed using the Julia package manager. The online documentation, including examples, can be obtained from our document page at https://smoqysuite.github.io/SmoQyDQMC.jl/stable/.
△ Less
Submitted 17 April, 2024; v1 submitted 15 November, 2023;
originally announced November 2023.
-
Impact of SiO2 nanoparticle morphology on scattering efficiency for random lasers
Authors:
Yan D. R. Machado,
Gleice C. M. Germano,
Edison Pecoraro,
Antonio Mario L. M. Costa,
Isabel C. S. Carvalho
Abstract:
In this work, we compared the effect of Quartzite nanoparticles (QtzNP - crystalline SiO2) and amorphous silica nanoparticles (ASNP) as scatters in a random laser (RL), correlating the laser efficiency to the morphology and refractive index (RI) of the scatterers. The RL was based on a laser media containing suspensions of QtzNPs or ASNPs in Rhodamine 6G (Rh6G) and ethylene glycol (EG) suspension.…
▽ More
In this work, we compared the effect of Quartzite nanoparticles (QtzNP - crystalline SiO2) and amorphous silica nanoparticles (ASNP) as scatters in a random laser (RL), correlating the laser efficiency to the morphology and refractive index (RI) of the scatterers. The RL was based on a laser media containing suspensions of QtzNPs or ASNPs in Rhodamine 6G (Rh6G) and ethylene glycol (EG) suspension. It was observed a considerable increase in RL efficiency for QtzNPs, as compared to ASNPs, even for concentrations as low as 0.5mg/mL. Such grow in the RL eficiency is attributed to the higher RI of QtzNPs (n=1.54), which in-creases the reflectance of light on the particles surface and the high field scattering intensity in the sharp edges of the flat slab shapes, associated to the particle's morphology. Finite Element Method (FEM) simu-lations were also performed for different particle size and shapes and an output increase is noticed for QtzNPs when compared with the ASNP confirming the experimental results. The comparison between the morphology of QtzNPs and ASNPs on scattering efficiency reported here contribute to optimize the performance of laser systems with natural and synthetic nanomaterials.
△ Less
Submitted 29 July, 2023;
originally announced July 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Study and perspective on neutron beam divergence improvement achievable by the combination of two or more neutron collimating systems
Authors:
Oriol Sans-Planell,
Francesco Cantini,
Marco Costa,
Francesco Grazzi,
Manuel Morgano,
Masako Yamada
Abstract:
This communication presents the results obtained at an experimental campaign at PSI BOA beamline using the combination of the ANET Compact Neutron Collimator (CNC) with the actual BOA pin-hole system. Through extensive resolution campaigns, it has been possible to quantify and understand the effects of improvement on the beam divergence when combining the two collimating systems. A new theoretical…
▽ More
This communication presents the results obtained at an experimental campaign at PSI BOA beamline using the combination of the ANET Compact Neutron Collimator (CNC) with the actual BOA pin-hole system. Through extensive resolution campaigns, it has been possible to quantify and understand the effects of improvement on the beam divergence when combining the two collimating systems. A new theoretical approach to this problem is described and discussed. The effect is expected not to be limited to the specific case that has been studied at PSI BOA but to have a more general validity for neutron collimation systems.
△ Less
Submitted 24 February, 2023;
originally announced February 2023.
-
Machine Learning based tool for CMS RPC currents quality monitoring
Authors:
E. Shumka,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
K. Mota Amarilo,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov
, et al. (83 additional authors not shown)
Abstract:
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m…
▽ More
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Improved methodologies to study the performance of the ANET Compact Neutron Collimator
Authors:
Oriol Sans-Planell,
Francesco Cantini,
Marco Costa,
Elisabetta Durisi,
Francesco Grazzi,
Ettore Mafucci,
Valeria Monti,
Roberto Bedogni,
Yueer Li,
Lambert van Eijck
Abstract:
The ANET project aims at develo** 2D compact neutron collimators for neutron imaging applications. The results of the ANET collimator performances, presented in this communication, are based on data collected at the FISH beamline at TU-Delft. Two independent methods to evaluate the neutron radiography resolution are described and discussed, as well as a comparison of the beam divergence with or…
▽ More
The ANET project aims at develo** 2D compact neutron collimators for neutron imaging applications. The results of the ANET collimator performances, presented in this communication, are based on data collected at the FISH beamline at TU-Delft. Two independent methods to evaluate the neutron radiography resolution are described and discussed, as well as a comparison of the beam divergence with or without the ANET collimator.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
Resistive Read-out in Thin Silicon Sensors with Internal Gain
Authors:
N. Cartiglia,
F. Moscatelli,
R. Arcidiacono,
P. Asenov,
M. Costa,
T. Croci,
M. Ferrero,
A. Fondacci,
L. Lanteri,
L. Menzio,
A. Morozzi,
R. Mulargia,
D. Passeri,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
Two design innovations, low-gain avalanche (Low-Gain Avalance Diode, LGAD) and resistive read-out (Resistive Silicon Detector, RSD), have brought strong performance improvements to silicon sensors. Large signals, due to the added gain mechanism, lead to improved temporal precision, while charge sharing, introduced by resistive read-out, allows for achieving excellent spatial resolution even with l…
▽ More
Two design innovations, low-gain avalanche (Low-Gain Avalance Diode, LGAD) and resistive read-out (Resistive Silicon Detector, RSD), have brought strong performance improvements to silicon sensors. Large signals, due to the added gain mechanism, lead to improved temporal precision, while charge sharing, introduced by resistive read-out, allows for achieving excellent spatial resolution even with large pixels. LGAD- and RSD- based silicon sensors are now adopted, or considered, in several future experiments and are the basis for almost every next 4D-trackers. New results obtained with sensors belonging to the second FBK production of RSD (RSD2) demonstrate how a combined resolution of 30 ps and 30 \microns can be obtained with pixels as large as $1 \times 1 $ mm$^2$.
△ Less
Submitted 7 January, 2023;
originally announced January 2023.
-
RPC based tracking system at CERN GIF++ facility
Authors:
K. Mota Amarilo,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov
, et al. (83 additional authors not shown)
Abstract:
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system…
▽ More
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
High-Precision 4D Tracking with Large Pixels using Thin Resistive Silicon Detectors
Authors:
R. Arcidiacono,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
M. Costa,
G-F. Dalla Betta,
M. Ferrero,
F. Ficorella,
G. Gioachin,
L. Lanteri,
M. Mandurrino,
L. Menzio,
R. Mulargia,
L. Pancheri,
G. Paternoster,
A. Rojas,
H-F W. Sadrozinski,
A. Seiden,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sen…
▽ More
The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sensors from the second RSD production at the Fondazione Bruno Kessler. The paper first introduces the parametrization of the errors in the determination of the position and time coordinates in RSD, then outlines the reconstruction method, and finally presents the results. Three different pixel sizes are used in the analysis: 200 x 340, 450 x 450, and 1300 x 1300 microns^2. At gain = 30, the 450 x 450 microns^2 pixel achieves a time jitter of 20 ps and a spatial resolution of 15 microns concurrently, while the 1300 x 1300 microns^2 pixel achieves 30 ps and 30 micron, respectively. The implementation of cross-shaped electrodes improves considerably the response uniformity over the pixel surface.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Silicon sensors with resistive read-out: Machine Learning techniques for ultimate spatial resolution
Authors:
Marta Tornago,
Flavio Giobergia,
Luca Menzio,
Federico Siviero,
Roberta Arcidiacono,
Nicolò Cartiglia,
Marco Costa,
Marco Ferrero,
Giulia Gioachin,
Marco Mandurrino,
Valentina Sola
Abstract:
Resistive AC-coupled Silicon Detectors (RSDs) are based on the Low Gain Avalanche Diode (LGAD) technology, characterized by a continuous gain layer, and by the innovative introduction of resistive read-out. Thanks to a novel electrode design aimed at maximizing signal sharing, RSD2, the second RSD production by Fondazione Bruno Kessler (FBK), achieves a position resolution on the whole pixel surfa…
▽ More
Resistive AC-coupled Silicon Detectors (RSDs) are based on the Low Gain Avalanche Diode (LGAD) technology, characterized by a continuous gain layer, and by the innovative introduction of resistive read-out. Thanks to a novel electrode design aimed at maximizing signal sharing, RSD2, the second RSD production by Fondazione Bruno Kessler (FBK), achieves a position resolution on the whole pixel surface of about 8 $μm$ for 200-$μm$ pitch. RSD2 arrays have been tested using a Transient Current Technique setup equipped with a 16-channel digitizer, and results on spatial resolution have been obtained with machine learning algorithms.
△ Less
Submitted 2 November, 2022; v1 submitted 17 August, 2022;
originally announced August 2022.
-
Preprint: Institutional Value of a Nobel Prize
Authors:
Sasidev Mahendran,
Claudia M. Costa,
Julie A. Wernert,
Craig A. Stewart
Abstract:
The Nobel Prize is awarded each year to individuals who have conferred the greatest benefit to humankind in Physics, Chemistry, Medicine, Economics, Literature, and Peace, and is considered by many to be the most prestigious recognition for one's body of work. Receiving a Nobel prize confers a sense of financial independence and significant prestige, vaulting its recipients to global prominence. A…
▽ More
The Nobel Prize is awarded each year to individuals who have conferred the greatest benefit to humankind in Physics, Chemistry, Medicine, Economics, Literature, and Peace, and is considered by many to be the most prestigious recognition for one's body of work. Receiving a Nobel prize confers a sense of financial independence and significant prestige, vaulting its recipients to global prominence. Apart from the prize money (approximately US$1,145,000), a Nobel laureate can expect to benefit in a number of ways, including increased success in securing grants, wider adoption and promulgation of one's theories and ideas, increased professional and academic opportunities, and, in some cases, a measure of celebrity. A Nobel laureate's affiliated institution, by extension, also greatly benefits. Because of this, many institutions seek to employ Nobel Prize winners or individuals who have a high likelihood of winning one in the future. Many of the recent discoveries and innovations recognized with a Nobel Prize were made possible only because of advanced computing capabilities. Understanding the ways in which advanced research computing facilities and services are essential in enabling new and important discoveries cannot be overlooked in examining the value of a Nobel Prize. This paper explores an institution's benefits of having a Nobel Prize winner among its ranks.
△ Less
Submitted 30 April, 2022;
originally announced May 2022.
-
DC-coupled resistive silicon detectors for 4-D tracking
Authors:
L. Menzio,
R. Arcidiacono,
G. Borghi,
M. Boscardin,
N. Cartiglia,
M. Centis Vignali,
M. Costa,
G-F. Dalla Betta,
M. Ferrero,
F. Ficorella,
G. Gioachin,
M. Mandurrino,
L. Pancheri,
G. Paternoster,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key feat…
▽ More
In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key features of the RSD design are maintained, yielding excellent timing and spatial resolutions: a few tens of ps and a few microns. In the presentation, we will outline the optimization methodology and the results of the simulation. We will present detailed studies on the effect of changing the ratio between the n+ layer resistivity and the low-resistivity ring and on the achievable temporal and spatial resolution.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
4D Tracking: Present Status and Perspective
Authors:
N. Cartiglia,
R. Arcidiacono,
M. Costa,
M. Ferrero,
G. Gioachin,
M. Mandurrino,
L. Menzio,
F. Siviero,
V. Sola,
M. Tornago
Abstract:
The past ten years have seen the advent of silicon-based precise timing detectors for charged particle tracking. The underlying reason for this evolution is a design innovation: the Low-Gain Avalanche Diode (LGAD). In its simplicity, the LGAD design is an obvious step with momentous consequences: low gain leads to large signals maintaining sensors stability and low noise, allowing sensor segmentat…
▽ More
The past ten years have seen the advent of silicon-based precise timing detectors for charged particle tracking. The underlying reason for this evolution is a design innovation: the Low-Gain Avalanche Diode (LGAD). In its simplicity, the LGAD design is an obvious step with momentous consequences: low gain leads to large signals maintaining sensors stability and low noise, allowing sensor segmentation. Albeit introduced for a different reason, to compensate for charge trap** in irradiated silicon sensors, LGAD found fertile ground in the design of silicon-based timing detectors. Spurred by this design innovation, solid-state-based timing detectors for charged particles are going through an intense phase of R&D, and hybrid and monolithic sensors, with or without internal gain, are being explored. This contribution offers a review of this booming field.
△ Less
Submitted 11 July, 2022; v1 submitted 13 April, 2022;
originally announced April 2022.
-
First experimental results of the spatial resolution of RSD pad arrays read out with a 16-ch board
Authors:
F. Siviero,
F. Giobergia,
L. Menzio,
F. Miserocchi,
M. Tornago,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
M. Ferrero,
G. Gioachin,
M. Mandurrino,
V. Sola
Abstract:
Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across the whole sensor active area. RSDs are very promising tracking detectors, thanks to the combination of the built-in signal sharing with the internal charge multiplication, which allows large signals to be seen over multi…
▽ More
Resistive Silicon Detectors (RSD, also known as AC-LGAD) are innovative silicon sensors, based on the LGAD technology, characterized by a continuous gain layer that spreads across the whole sensor active area. RSDs are very promising tracking detectors, thanks to the combination of the built-in signal sharing with the internal charge multiplication, which allows large signals to be seen over multiple read-out channels. This work presents the first experimental results obtained from a 3$\times$4 array with 200~\mum~pitch, coming from the RSD2 production manufactured by FBK, read out with a 16-ch digitizer. A machine learning model has been trained, with experimental data taken with a precise TCT laser setup, and then used to predict the laser shot positions, finding a spatial resolution of $\sim$~5.5~\mum.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
A Next-Generation Liquid Xenon Observatory for Dark Matter and Neutrino Physics
Authors:
J. Aalbers,
K. Abe,
V. Aerne,
F. Agostini,
S. Ahmed Maouloud,
D. S. Akerib,
D. Yu. Akimov,
J. Akshat,
A. K. Al Musalhi,
F. Alder,
S. K. Alsum,
L. Althueser,
C. S. Amarasinghe,
F. D. Amaro,
A. Ames,
T. J. Anderson,
B. Andrieu,
N. Angelides,
E. Angelino,
J. Angevaare,
V. C. Antochi,
D. Antón Martin,
B. Antunovic,
E. Aprile,
H. M. Araújo
, et al. (572 additional authors not shown)
Abstract:
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neut…
▽ More
The nature of dark matter and properties of neutrinos are among the most pressing issues in contemporary particle physics. The dual-phase xenon time-projection chamber is the leading technology to cover the available parameter space for Weakly Interacting Massive Particles (WIMPs), while featuring extensive sensitivity to many alternative dark matter candidates. These detectors can also study neutrinos through neutrinoless double-beta decay and through a variety of astrophysical sources. A next-generation xenon-based detector will therefore be a true multi-purpose observatory to significantly advance particle physics, nuclear physics, astrophysics, solar physics, and cosmology. This review article presents the science cases for such a detector.
△ Less
Submitted 4 March, 2022;
originally announced March 2022.
-
Design of the ELIMAIA ion collection system
Authors:
F. Schillaci,
G. A. P. Cirrone,
G. Cuttone,
M. Maggiore,
L. Ando,
A. Amato,
M. Costa,
G. Gallo,
G. Korn,
G. Larosa,
R. Leanza,
R. Manna,
D. Margarone,
G. Milluzzo,
S. Pulvirenti,
F. Romano,
S. Salamone,
M. Sedita,
V. Scuderia,
A. Tramontana
Abstract:
A system of permanent magnet quadrupoles (PMQs) is going to be realized by INFNLNS to be used as a collection system for the injection of laser driven ion beams up to 60 AMeV in an energy selector based on four resistive dipoles. This system is the first element of the ELIMED (ELI-Beamlines MEDical and Multidisciplinary applications) beam transport, dosimetry and irradiation line that will be deve…
▽ More
A system of permanent magnet quadrupoles (PMQs) is going to be realized by INFNLNS to be used as a collection system for the injection of laser driven ion beams up to 60 AMeV in an energy selector based on four resistive dipoles. This system is the first element of the ELIMED (ELI-Beamlines MEDical and Multidisciplinary applications) beam transport, dosimetry and irradiation line that will be developed by INFN-LNS (It) and installed at the ELI-Beamlines facility in Prague (Cz). ELIMED will be the first users open transport beam-line where a controlled laser-driven ion beam will be used for multidisciplinary researches. The definition of well specified characteristics, both in terms of performances and field quality, of the magnetic lenses is crucial for the system realization, for the accurate study of the beam dynamics and for the proper matching with the magnetic selection system which will be designed in the next months.
Here, we report the design of the collection system and the adopted solutions in order to realize a robust system form the magnetic point of view. Moreover, the first preliminary transport simulations are also described.
△ Less
Submitted 1 January, 2022;
originally announced January 2022.
-
Optimization of the Gain Layer Design of Ultra-Fast Silicon Detectors
Authors:
Federico Siviero,
Roberta Arcidiacono,
Giacomo Borghi,
Maurizio Boscardin,
Nicolo Cartiglia,
Matteo Centis Vignali,
Marco Costa,
Gian Franco Dalla Betta,
Marco Ferrero,
Francesco Ficorella,
Giulia Gioachin,
Marco Mandurrino,
Simone Mazza,
Luca Menzio,
Lucio Pancheri,
Giovanni Paternoster,
Hartmut F. W. Sadrozinski,
Abraham Seiden,
Valentina Sola,
Marta Tornago
Abstract:
In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been…
▽ More
In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been proposed and adopted by the CMS and ATLAS collaborations for their respective timing layers. The defining feature of the Ultra-Fast Silicon Detectors (UFSDs) is the internal multiplication mechanism, determined by the gain layer design. In this paper, the performances of several types of gain layers, measured with a telescope instrumented with a $^{90}$Sr $β$-source, are reported and compared. The measured sensors are produced by Fondazione Bruno Kessler (FBK) and Hamamatsu Photonics (HPK). The sensor yielding the best performance, both when new and irradiated, is an FBK 45\mum-thick sensor with a carbonated deep gain implant, where the carbon and the boron implants are annealed concurrently with a low thermal load. This sensor is able to achieve a time resolution of 40~ps up to a radiation fluence of~\fluence{2.5}{15}, delivering at least 5~fC of charge.
△ Less
Submitted 8 March, 2022; v1 submitted 1 December, 2021;
originally announced December 2021.
-
First Results with the ANET Compact Thermal Neutron Collimator
Authors:
Oriol Sans-Planell,
Marco Costa,
Elisabetta Durisi,
Ettore Mafucci,
Luca Menzio,
Valeria Monti,
Lorenzo Visca,
Francesco Grazzi,
Roberto Bedogni,
Saverio Altieri
Abstract:
This paper presents the first determination of the spatial resolution of the ANET Compact Neutron Collimator, obtained with a measuring campaign at the LENA Mark-II TRIGA reactor in Pavia. This novel collimator consists of a sequence of collimating and absorbing channels organised in a chessboard-like geometry. It has a scalable structure both in length and in the field of view. It is characterize…
▽ More
This paper presents the first determination of the spatial resolution of the ANET Compact Neutron Collimator, obtained with a measuring campaign at the LENA Mark-II TRIGA reactor in Pavia. This novel collimator consists of a sequence of collimating and absorbing channels organised in a chessboard-like geometry. It has a scalable structure both in length and in the field of view. It is characterized by an elevated collimation power within a limited length. Its scalability and compactness are added values with respect to traditional collimating system. The prototype tested in this article is composed of 4 concatenated stages, each 100mm long, with a channel width of 2.5mm, delivering a nominal L/D factor of 160. This measuring campaign illustrates the use of the ANET collimator and its potential application in neutron imaging for facilities with small or medium size neutron sources.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.
-
An automated near-real time computational method for induction and treatment of scar-related ventricular tachycardias
Authors:
Fernando O. Campos,
Aurel Neic,
Caroline Mendonca Costa,
John Whitaker,
Mark O'Neill,
Reza Razavi,
Christopher A. Rinaldi,
Daniel Scherr,
Steven A. Niederer,
Gernot Plank,
Martin J. Bishop
Abstract:
Catheter ablation is currently the only curative treatment for scar-related ventricular tachycardias (VTs). However, not only are ablation procedures long, with relatively high risk, but success rates are punitively low, with frequent VT recurrence. Personalized in-silico approaches have the opportunity to address these limitations. However, state-of-the-art reaction diffusion (R-D) simulations of…
▽ More
Catheter ablation is currently the only curative treatment for scar-related ventricular tachycardias (VTs). However, not only are ablation procedures long, with relatively high risk, but success rates are punitively low, with frequent VT recurrence. Personalized in-silico approaches have the opportunity to address these limitations. However, state-of-the-art reaction diffusion (R-D) simulations of VT induction and subsequent circuits used for in-silico ablation target identification require long execution times, along with vast computational resources, which are incompatible with the clinical workflow. Here, we present the Virtual Induction and Treatment of Arrhythmias (VITA), a novel, rapid and fully automated computational approach that uses reaction-Eikonal methodology to induce VT and identify subsequent ablation targets. The rationale for VITA is based on finding isosurfaces associated with an activation wavefront that splits in the ventricles due to the presence of an isolated isthmus of conduction within the scar; once identified, each isthmus may be assessed for their vulnerability to sustain a reentrant circuit, and the corresponding exit site automatically identified for potential ablation targeting. VITA was tested on a virtual cohort of 7 post-infarcted porcine hearts and the results compared to R-D simulations. Using only a standard desktop machine, VITA could detect all scar-related VTs, simulating activation time maps and ECGs (for clinical comparison) as well as computing ablation targets in 48 minutes. The comparable VTs probed by the R-D simulations took 68.5 hours on 256 cores of high-performance computing infrastructure. The set of lesions computed by VITA was shown to render the ventricular model VT-free. VITA could be used in near real-time as a complementary modality aiding in clinical decision-making in the treatment of post-infarction VTs.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
Design of a novel compact neutron collimator
Authors:
Roberto Bedogni,
Marco Costa,
Elisabetta Durisi,
Francesco Grazzi,
Alessandro Lega,
Ettore Mafucci,
Luca Menzio,
Valeria Monti,
Oriol Sans-Planell,
Lorenzo Visca
Abstract:
In this work the concept of a novel slow neutron collimator and the way to operate it are presented. The idea is based on the possibility to decouple the device field-of-view from its collimation power. A multi-channel geometry is proposed consisting of a chess-board structure where highly neutron-absorbing channels are alternated to air channels. A borated polymer was purposely developed to produ…
▽ More
In this work the concept of a novel slow neutron collimator and the way to operate it are presented. The idea is based on the possibility to decouple the device field-of-view from its collimation power. A multi-channel geometry is proposed consisting of a chess-board structure where highly neutron-absorbing channels are alternated to air channels. A borated polymer was purposely developed to produce the attenuating components in the form of square-sectioned long rods. A scalable structure consisting of multiple collimation sectors can be arranged. The geometrical parameter LD, corresponding to the ratio between the length of a channel and its width, defines the collimation power. Several sectors can be arranged one after the other to reach relevant collimation powers. Each sector, 100 mm long, is composed by several channels with D = 2.5 mm corresponding to an L/D coefficient of 40. The target field of view is 50x50 mm2. This novel collimator, developed inside the INFN-ANET collaboration, due to its intrinsic compactness, will be of great importance to enhance the neutron imaging capability of small to medium-size neutron sources.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
First application of machine learning algorithms to the position reconstruction in Resistive Silicon Detectors
Authors:
Federico Siviero,
Roberta Arcidiacono,
Nicolò Cartiglia,
Marco Costa,
Marco Ferrero,
Marco Mandurrino,
Valentina Sola,
Amedeo Staiano,
Marta Tornago
Abstract:
RSDs (Resistive AC-Coupled Silicon Detectors) are n-in-p silicon sensors based on the LGAD (Low-Gain Avalanche Diode) technology, featuring a continuous gain layer over the whole sensor area. The truly innovative feature of these sensors is that the signal induced by an ionising particle is seen on several pixels, allowing the use of reconstruction techniques that combine the information from many…
▽ More
RSDs (Resistive AC-Coupled Silicon Detectors) are n-in-p silicon sensors based on the LGAD (Low-Gain Avalanche Diode) technology, featuring a continuous gain layer over the whole sensor area. The truly innovative feature of these sensors is that the signal induced by an ionising particle is seen on several pixels, allowing the use of reconstruction techniques that combine the information from many read-out channels. In this contribution, the first application of a machine learning technique to RSD devices is presented. The spatial resolution of this technique is compared to that obtained with the standard RSD reconstruction methods that use analytical descriptions of the signal sharing mechanism. A Multi-Output regressor algorithm, trained with a combination of simulated and real data, leads to a spatial resolution of less than 2 $μm$ for a sensor with a 100 $μm$ pixel. The prospects of future improvements are also discussed.
△ Less
Submitted 26 January, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
A Parametrized Nonlinear Predictive Control Strategy for Relaxing COVID-19 Social Distancing Measures in Brazil
Authors:
Marcelo M. Morato,
Igor M. L. Pataro,
Marcus V. Americano da Costa,
Julio E. Normey-Rico
Abstract:
In this paper, we formulate a Nonlinear Model Predictive Control (NMPC) to plan appropriate social distancing measures (and relaxations) in order to mitigate the COVID-19 pandemic effects, considering the contagion development in Brazil. The NMPC strategy is designed upon an adapted data-driven Susceptible-Infected-Recovered-Deceased (SIRD) contagion model, which takes into account the effects of…
▽ More
In this paper, we formulate a Nonlinear Model Predictive Control (NMPC) to plan appropriate social distancing measures (and relaxations) in order to mitigate the COVID-19 pandemic effects, considering the contagion development in Brazil. The NMPC strategy is designed upon an adapted data-driven Susceptible-Infected-Recovered-Deceased (SIRD) contagion model, which takes into account the effects of social distancing. Furthermore, the adapted SIRD model includes time-varying auto-regressive contagion parameters, which dynamically converge according to the stage of the pandemic. This new model is identified through a three-layered procedures, with analytical regressions, Least-Squares optimization runs and auto-regressive model fits. The data-driven model is validated and shown to adequately describe the contagion curves over large forecast horizons. In this model, control input is defined as finitely parametrized values for social distancing guidelines, which directly affect the transmission and infection rates of the SARS-CoV-2 virus. The NMPC strategy generates piece-wise constant quarantine guidelines which can be relaxed/strengthen as each week passes. The implementation of the method is pursued through a search mechanism, since the control is finitely parametrized and, thus, there exist a finite number of possible control sequences. Simulation essays are shown to illustrate the results obtained with the proposed closed-loop NMPC strategy, which is able to mitigate the number of infections and progressively loosen social distancing measures. With respect to an "open-loop"/no control condition, the number of deaths still could be reduced in up to 30 %. The forecast preview an infection peak to September 2nd, 2020, which could lead to over 1.5 million deaths if no coordinate health policy is enacted. The framework serves as guidelines for possible public health policies in Brazil.
△ Less
Submitted 19 July, 2020;
originally announced July 2020.
-
Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data
Authors:
M. Tornago,
R. Arcidiacono,
N. Cartiglia,
M. Costa,
M. Ferrero,
M. Mandurrino,
F. Siviero,
V. Sola,
A. Staiano,
A. Apresyan,
K. Di Petrillo,
R. Heller,
S. Los,
G. Borghi,
M. Boscardin,
G-F Dalla Betta,
F. Ficorella,
L. Pancheri,
G. Paternoster,
H. Sadrozinski,
A. Seiden
Abstract:
This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained v…
▽ More
This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an im**ing particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the $n^+$ do** profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between $2.5\; μm$ for 70-100 pad-pitch geometry and $17\; μm$ with 200-500 matrices, a factor of 10 better than what is achievable in binary read-out ($bin\; size/ \sqrt{12}$). Beam test data show a temporal resolution of $\sim 40\; ps$ for 200-$μm$ pitch devices, in line with the best performances of LGAD sensors at the same gain.
△ Less
Submitted 11 February, 2021; v1 submitted 18 July, 2020;
originally announced July 2020.
-
Optimal Control Concerns Regarding the COVID-19 (SARS-CoV-2) Pandemic in Bahia and Santa Catarina, Brazil
Authors:
Marcelo M. Morato,
Igor M. L. Pataro,
Marcus V. Americano da Costa,
Julio E. Normey-Rico
Abstract:
The COVID-19 pandemic is the profoundest health crisis of the 21rst century. The SARS-CoV-2 virus arrived in Brazil around March, 2020 and its social and economical backlashes are catastrophic. In this paper, it is investigated how Model Predictive Control (MPC) could be used to plan appropriate social distancing policies to mitigate the pandemic effects in Bahia and Santa Catarina, two states of…
▽ More
The COVID-19 pandemic is the profoundest health crisis of the 21rst century. The SARS-CoV-2 virus arrived in Brazil around March, 2020 and its social and economical backlashes are catastrophic. In this paper, it is investigated how Model Predictive Control (MPC) could be used to plan appropriate social distancing policies to mitigate the pandemic effects in Bahia and Santa Catarina, two states of different regions, culture, and population demography in Brazil. In addition, the parameters of Susceptible-Infected-Recovered-Deceased (SIRD) models for these two states are identified using an optimization procedure. The control input to the process is a social isolation guideline passed to the population. Two MPC strategies are designed: a) a centralized MPC, which coordinates a single control policy for both states; and b) a decentralized strategy, for which one optimization is solved for each state. Simulation results are shown to illustrate and compare both control strategies. The framework serves as guidelines to deals with such pandemic phenomena.
△ Less
Submitted 24 June, 2020;
originally announced June 2020.
-
CMS RPC Background -- Studies and Measurements
Authors:
R. Hadjiiska,
A. Samalan,
M. Tytgat,
N. Zaganidis,
G. A. Alves,
F. Marujo,
F. Torres Da Silva De Araujo,
E. M. Da Costa,
D. De Jesus Damiao,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
A. Aleksandrov,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
M. Bonchev,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
C. Bernal
, et al. (84 additional authors not shown)
Abstract:
The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be upd…
▽ More
The expected radiation background in the CMS RPC system has been studied using the MC prediction with the CMS FLUKA simulation of the detector and the cavern. The MC geometry used in the analysis describes very accurately the present RPC system but still does not include the complete description of the RPC upgrade region with pseudorapidity $1.9 < \lvert η\rvert < 2.4$. Present results will be updated with the final geometry description, once it is available. The radiation background has been studied in terms of expected particle rates, absorbed dose and fluence. Two High Luminosity LHC (HL-LHC) scenarios have been investigated - after collecting $3000$ and $4000$ fb$^{-1}$. Estimations with safety factor of 3 have been considered, as well.
△ Less
Submitted 13 December, 2020; v1 submitted 26 May, 2020;
originally announced May 2020.
-
A proposal for an active methodology for physics labs
Authors:
Suzane F. Pinto,
Ronan S. Ferreira,
Miguel M. Costa,
Agmael M. Silva
Abstract:
Active methodologies aim to develop a critical sense of what is learned, relating theoretical concepts to the practical environment. In this work, we propose an active teaching-learning methodology for laboratory classes in which the student has the autonomy to propose scripts and equipment, instead of following a practice roadmap already defined (built by the teacher or made available by manufact…
▽ More
Active methodologies aim to develop a critical sense of what is learned, relating theoretical concepts to the practical environment. In this work, we propose an active teaching-learning methodology for laboratory classes in which the student has the autonomy to propose scripts and equipment, instead of following a practice roadmap already defined (built by the teacher or made available by manufacturers for their science kits), in accordance with the theoretical knowledge acquired. The objective is to encourage the student to be the protagonist in experimental activities, based on the theoretical knowledge acquired in the classroom. In this way, we split the method into three parts, namely: (i) Theoretical exposition, (ii) theoretical seminar and proposition of the experimental script and (iii) seminar for the exposition of the experiment carried out. Each of these steps is guided by one or more professional skills, such as: innovation, creativity, proactivity, protagonism, critical sense and scientific thinking, aiming to bring the academic environment to the professional environment.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Development of gamma insensitive silicon carbide diagnostics to qualify intense thermal and epithermal neutron fields
Authors:
O. Sans Planell,
M. Costa,
E. Durisi,
A. Lega,
E. Mafucci,
L. Menzio,
V. Monti,
L. Visca,
R. Bedogni,
M. Treccani,
A. Pola,
D. Bortot,
K. Alikaniotis,
G. Giannini,
J. M. Gomez-Ros
Abstract:
The e_LiBANS project aims at creating accelerator based compact neutron facilities for diverse interdisciplinary applications. After the successful setting up and characterization of a thermal neutron source based on a medical electron LINAC, a similar assembly for epithermal neutrons has been developed. The project is based on an Elekta 18 MV LINAC coupled with a photoconverter-moderator system w…
▽ More
The e_LiBANS project aims at creating accelerator based compact neutron facilities for diverse interdisciplinary applications. After the successful setting up and characterization of a thermal neutron source based on a medical electron LINAC, a similar assembly for epithermal neutrons has been developed. The project is based on an Elekta 18 MV LINAC coupled with a photoconverter-moderator system which deploys the (γ,n) photonuclear reaction to convert a bremsstrahlung photon beam into a neutron field. This communication describes the development of novel diagnostics to qualify the thermal and epithermal neutron fields that have been produced. In particular, a proof of concept for the use of silicon carbide photodiodes as a thermal neutron rate detector is presented.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Silicon Sensors for Future Particle Trackers
Authors:
N. Cartiglia,
R. Arcidiacono,
G. Borghi,
M. Boscardin,
M. Costa,
Z. Galloway,
F. Fausti,
M. Ferrero,
F. Ficorella,
M. Mandurrino,
S. Mazza,
E. J. Olave,
G. Paternoster,
F. Siviero,
H. F-W. Sadrozinski,
V. Sola,
A. Staiano,
A. Seiden,
M. Tornago,
Y. Zhao
Abstract:
Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, sc…
▽ More
Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, schedule and physics reach, and each proposal requires the design and production of specific new detectors. This paper first presents the performances required to the future silicon tracking systems at the various new facilities, and then it illustrates a few possibilities for the realization of such silicon trackers. The challenges posed by the future facilities require a new family of silicon detectors, where features such as impact ionization, radiation damage saturation, charge sharing, and analog readout are exploited to meet these new demands.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
The e_LiBANS facility: a new compact thermal neutron source based on a medical electron LINAC
Authors:
Valeria Monti,
Marco Costa,
Elisabetta Durisi,
Ettore Mafucci,
Luca Menzio,
Oriol Sans-Planell,
Lorenzo Visca,
Roberto Bedogni,
Matteo Treccani,
Andrea Pola,
Davide Bortot,
Katia Alikaniotis,
Gianrossano Giannini,
Jose Maria Gomez-Ros
Abstract:
A new photonuclear thermal neutron facility has been developed at the Physics Department of University of Torino. The facility is based on a medical electron LINAC coupled to a compact converter and moderator assembly. A homogenous thermal neutron field of the order of 10$^6$ cm$^{-2}$s$^{-1}$ is achievable in the enclosed irradiation cavity with low gamma and fast neutron contaminations. Its inte…
▽ More
A new photonuclear thermal neutron facility has been developed at the Physics Department of University of Torino. The facility is based on a medical electron LINAC coupled to a compact converter and moderator assembly. A homogenous thermal neutron field of the order of 10$^6$ cm$^{-2}$s$^{-1}$ is achievable in the enclosed irradiation cavity with low gamma and fast neutron contaminations. Its intensity can be tuned varying the LINAC current. These characteristics make the source appropriate for several applications like detectors development, material studies and BNCT preclinical research. This work describes the project and the experimental characterization of the facility. This includes the measurement of the thermal neutron fluence rate, the determination of the neutron energy spectrum and of the thermal neutron field uniformity and the evaluation of the gamma contamination.
△ Less
Submitted 2 September, 2019;
originally announced September 2019.
-
Ground/space, passive/active remote sensing observations coupled with particle dispersion modelling to understand the inter-continental transport of wildfire smoke plumes
Authors:
M. Sicard,
M. J. Granados-Munoz,
L. Alados-Arboledas,
R. Barragan,
A. E. Bedoya-Velasquez,
J. A. Benavent-Oltra,
D. Bortoli,
A. Comeron,
C. Cordoba-Jabonero,
M. J. Costa,
A. del Aguila,
A. J. Fernandez,
J. L. Guerrero-Rascado,
O. Jorba,
F. Molero,
C. Munoz-Porcar,
P. Ortiz-Amezcua,
N. Papagiannopoulos,
M. Potes,
M. Pujadas,
F. Rocadenbosch,
A. Rodriguez-Gomez,
R. Roman,
R. Salgado,
V. Salgueiro
, et al. (2 additional authors not shown)
Abstract:
During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a…
▽ More
During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a few days later on 7 and 8 September. Satellite imagery allows to identify two main smoke clouds emitted during two different periods that were injected and transported in the atmosphere at several altitude levels. Columnar properties on 7 and 8 September at two Aerosol Robotic Network (AERONET) mid-altitude, background sites in northern and southern Spain are: aerosol optical depth (AOD) at 440 nm up to 0.62, Angstrom exponent of 1.6-1.7, large dominance of small particles (fine mode fraction > 0.88), low absorption AOD at 440 nm (<0.008) and large single scattering albedo at 440 nm (>0.98). Profiles from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) show the presence of smoke particles in the stratosphere during the transport, whereas the smoke is only observed in the troposphere at its arrival over the IP. Portuguese and Spanish ground lidar stations from the European Aerosol Research Lidar Network / Aerosols, Clouds, and Trace gases Research InfraStructure Network (EARLINET/ACTRIS) and the Micro-Pulse Lidar NETwork (MPLNET) reveal smoke plumes with different properties: particle depolarization ratio and color ratio, respectively, of 0.05 and 2.5 in the mid troposphere (5-9 km) and of 0.10 and 3.0 in the upper troposphere (10-13 km). In the mid troposphere the particle depolarization ratio does not seem time-dependent during the transport whereas the color ratio seems to increase (larger particles sediment first).
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Machine detector interface for the $e^+e^-$ future circular collider
Authors:
Manuela Boscolo,
Oscar Blanco-Garcia,
Nicola Bacchetta,
Eleonora Belli,
Michael Benedikt,
Helmut Burkhardt,
Miguel Gil Costa,
Konrad Elsener,
Emilia Leogrande,
Patrick Janot,
Herman Ten Kate,
Dima El Khechen,
Anna Kolano,
Roberto Kersevan,
Marian Lueckof,
Katsunobu Oide,
Emmanuel Perez,
Nilou Teherani,
O. Viazlo,
Yorgos Voutsinas,
Frank Zimmermann,
Mogens Dam,
Alain Blondel,
M. Koratzinos,
Alexander Novokhatski
, et al. (5 additional authors not shown)
Abstract:
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s…
▽ More
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Integrating Small Satellite Communication in an Autonomous Vehicle Network: A Case for Oceanography
Authors:
André G. C. Guerra,
António Sérgio Ferreira,
Maria Costa,
Diego Nodar-López,
Fernando Aguado Agelet
Abstract:
Small satellites and autonomous vehicles have greatly evolved in the last few decades. Hundreds of small satellites have been launched with increasing functionalities, in the last few years. Likewise, numerous autonomous vehicles have been built, with decreasing costs and form-factor payloads. Here we focus on combining these two multifaceted assets in an incremental way, with an ultimate goal of…
▽ More
Small satellites and autonomous vehicles have greatly evolved in the last few decades. Hundreds of small satellites have been launched with increasing functionalities, in the last few years. Likewise, numerous autonomous vehicles have been built, with decreasing costs and form-factor payloads. Here we focus on combining these two multifaceted assets in an incremental way, with an ultimate goal of alleviating the logistical expenses in remote oceanographic operations. The first goal is to create a highly reliable and constantly available communication link for a network of autonomous vehicles, taking advantage of the small satellite lower cost, with respect to conventional spacecraft, and its higher flexibility. We have developed a test platform as a proving ground for this network, by integrating a satellite software defined radio on an unmanned air vehicle, creating a system of systems, and several tests have been run successfully, over land. As soon as the satellite is fully operational, we will start to move towards a cooperative network of autonomous vehicles and small satellites, with application in maritime operations, both \textit{in-situ} and remote sensing.
△ Less
Submitted 17 April, 2018; v1 submitted 30 October, 2017;
originally announced October 2017.
-
A new instrument for high statistics measurement of photomultiplier characteristics
Authors:
C. Bozza,
T. Chiarusi,
M. Costa,
F. Di Capua,
V. Kulikovskiy,
R. Mele,
P. Migliozzi,
C. M. Mollo,
C. Pellegrino,
G. Riccobene,
D. Vivolo
Abstract:
Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of astroparticle physics experiments, such as air, ice and water Cherenkov detectors. Small size PMTs ($\leq $ 3 inches diameter) show little sensitivity to the Earth m…
▽ More
Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of astroparticle physics experiments, such as air, ice and water Cherenkov detectors. Small size PMTs ($\leq $ 3 inches diameter) show little sensitivity to the Earth magnetic field, small transit time, stable transit time spread; the price per photocathode area is less comparing to the one for the large area PMTs, typically used so far in such applications. Together with developments and reduced price of multichannel electronics, the use of PMTs of 3-inches or smaller diameter is a promising option even for nowadays large volume detectors.
In this paper we report on the design and performance of a new instrument for mass characterisation of PMTs (from 1 inch to 3 inches size), capable to calibrate hundreds of PMTs per day and provide measurements of dark counts, signal amplitude, late-, delayed-, pre- and after-pulses, transit time and transit time spread.
△ Less
Submitted 14 July, 2016; v1 submitted 13 April, 2016;
originally announced April 2016.
-
The prototype detection unit of the KM3NeT detector
Authors:
KM3NeT Collaboration,
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
G. C. Androulakis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
T. Avgitas,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
J. Barrios,
A. Belias,
E. Berbee,
A. M. van den Berg
, et al. (224 additional authors not shown)
Abstract:
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt…
▽ More
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°.
△ Less
Submitted 23 December, 2015; v1 submitted 6 October, 2015;
originally announced October 2015.
-
Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype
Authors:
S. Adrián-Martínez,
S. Aiello,
F. Ameli,
M. Anghinolfi,
M. Ardid,
G. Barbarino,
E. Barbarito,
F. C. T. Barbato,
N. Beverini,
S. Biagi,
A. Biagioni,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calí,
D. Calvo,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa
, et al. (79 additional authors not shown)
Abstract:
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italia…
▽ More
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.
△ Less
Submitted 28 January, 2016; v1 submitted 17 July, 2015;
originally announced July 2015.
-
Trap** in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trap** rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trap** rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trap** rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower
Authors:
S. Aiello,
F. Ameli,
M. Anghinolfi,
G. Barbarino,
E. Barbarito,
F. Barbato,
N. Beverini,
S. Biagi,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calì,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa,
G. Cuttone,
C. D'Amato,
A. D'Amico,
G. De Bonis
, et al. (68 additional authors not shown)
Abstract:
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the…
▽ More
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.
△ Less
Submitted 3 December, 2014; v1 submitted 2 December, 2014;
originally announced December 2014.
-
Reconstruction of bremsstrahlung spectra from attenuation data using generalized simulated annealing
Authors:
Olavo Henrique Menin,
Alexandre Souto Martinez,
Alessandro Martins da Costa
Abstract:
The throughout knowledge of a X-ray beam spectrum is mandatory to assess the quality of its source device. Since the techniques to directly measurement such spectra are expensive and laborious, the X-ray spectrum reconstruction using attenuation data has been a promising alternative. However, such reconstruction corresponds mathematically to an inverse, nonlinear and ill-posed problem. Therefore,…
▽ More
The throughout knowledge of a X-ray beam spectrum is mandatory to assess the quality of its source device. Since the techniques to directly measurement such spectra are expensive and laborious, the X-ray spectrum reconstruction using attenuation data has been a promising alternative. However, such reconstruction corresponds mathematically to an inverse, nonlinear and ill-posed problem. Therefore, to solve it the use of powerful optimization algorithms and good regularization functions is required. Here, we present a generalized simulated annealing algorithm combined with a suitable smoothing regularization function to solve the X-ray spectrum reconstruction inverse problem. We also propose an approach to set the initial acceptance and visitation temperatures and a standardization of the objective function terms to automatize the algorithm to address with different spectra range. Numerical tests considering three different reference spectra with its attenuation curve are presented. Results show that the algorithm provides good accuracy to retrieve the reference spectra shapes corroborating the central importance of our regularization function and the performance improvement of the generalized simulated annealing compared to its classical version.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
Deep sea tests of a prototype of the KM3NeT digital optical module
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
R. de Asmundis,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
A. Belias,
E. Berbee,
A. M. van den Berg,
A. Berkien,
V. Bertin,
S. Beurthey
, et al. (225 additional authors not shown)
Abstract:
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th…
▽ More
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.
△ Less
Submitted 16 May, 2014; v1 submitted 5 May, 2014;
originally announced May 2014.
-
K X-Ray Energies and Transition Probabilities for He-, Li- and Be-like Praseodymium ions
Authors:
J. P. Santos,
A. M. Costa,
M. C. Martins,
P. Indelicato,
F. Parente
Abstract:
Theoretical transition energies and probabilities for He-, Li- and Be-like Praseodymium ions are calculated in the framework of the multi-configuration Dirac-Fock method (MCDF), including QED corrections. These calculated values are compared to recent experimental data obtained in the Livermore SuperEBIT electron beam ion trap facility.
Theoretical transition energies and probabilities for He-, Li- and Be-like Praseodymium ions are calculated in the framework of the multi-configuration Dirac-Fock method (MCDF), including QED corrections. These calculated values are compared to recent experimental data obtained in the Livermore SuperEBIT electron beam ion trap facility.
△ Less
Submitted 6 May, 2011;
originally announced May 2011.
-
Relativistic transition wavelenghts and probabilities for spectral lines of Ne II
Authors:
J. P. Santos,
A. M. Costa,
C. Madruga,
F. Parente,
P. Indelicato
Abstract:
Transition wavelengths and probabilities for several 2p4 3p - 2p4 3s and 2p4 3d - 2p4 3p lines in fuorine-like neon ion (NeII) have been calculated within the multiconfiguration Dirac-Fock (MCDF) method with quantum electrodynamics (QED) corrections. The results are compared with all existing experimental and theoretical data.
Transition wavelengths and probabilities for several 2p4 3p - 2p4 3s and 2p4 3d - 2p4 3p lines in fuorine-like neon ion (NeII) have been calculated within the multiconfiguration Dirac-Fock (MCDF) method with quantum electrodynamics (QED) corrections. The results are compared with all existing experimental and theoretical data.
△ Less
Submitted 25 April, 2011; v1 submitted 11 April, 2011;
originally announced April 2011.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Production and decay of Sulphur excited species in a ECRIS plasma
Authors:
M. C. Martins,
J. P. Marques,
A. M. Costa,
J. P. Santos,
F. Parente,
S. Schlesser,
E. -O. Le Bigot,
Paul Indelicato
Abstract:
The most important processes for the creation of S12+ to S14+ ions excited states from the ground configurations of S9+ to S14+ ions in an electron cyclotron resonance ion source, leading to the emission of K X-ray lines, are studied. Theoretical values for inner-shell excitation and ionization cross sections, including double KL and triple KLL ionization, transition probabilities and energies f…
▽ More
The most important processes for the creation of S12+ to S14+ ions excited states from the ground configurations of S9+ to S14+ ions in an electron cyclotron resonance ion source, leading to the emission of K X-ray lines, are studied. Theoretical values for inner-shell excitation and ionization cross sections, including double KL and triple KLL ionization, transition probabilities and energies for the deexcitation processes, are calculated in the framework of the multi-configuration Dirac-Fock method. With reasonable assumptions about the electron energy distribution, a theoretical K$α$ X-ray spectrum is obtained, which is compared to recent experimental data.
△ Less
Submitted 13 September, 2009;
originally announced September 2009.
-
Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam
Authors:
A. Ahmad,
A. Andreazza,
T. Atkinson,
J. Baines,
A. J. Barr,
R. Beccherle,
P. J. Bell,
J. Bernabeu,
Z. Broklova,
P. A. Bruckman de Renstrom,
D. Cauz,
L. Chevalier,
S. Chouridou,
M. Citterio,
A. Clark,
M. Cobal,
T. Cornelissen,
S. Correard,
M. J. Costa,
D. Costanzo,
S. Cuneo,
M. Dameri,
G. Darbo,
J. B. de Vivie,
B. Di Girolamo
, et al. (104 additional authors not shown)
Abstract:
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated u…
▽ More
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.
-
ATLAS silicon module assembly and qualification tests at IFIC Valencia
Authors:
J. Bernabeu,
J. V. Civera,
M. J. Costa,
C. Escobar,
J. Fuster,
C. Garcia,
J. E. Garcia-Navarro,
F. Gonzalez,
S. Gonzalez-Sevilla,
C. Lacasta,
G. Llosa,
S. Marti-Garcia,
M. Minano,
V. A. Mitsou,
P. Modesto,
J. Nacher,
R. Rodriguez-Oliete,
F. J. Sanchez,
L. Sospedra,
V. Strachko
Abstract:
ATLAS experiment, designed to probe the interactions of particles emerging out of proton proton collisions at energies of up to 14 TeV, will assume operation at the Large Hadron Collider (LHC) at CERN in 2007. This paper discusses the assembly and the quality control tests of forward detector modules for the ATLAS silicon microstrip detector assembled at the Instituto de Fisica Corpuscular (IFIC…
▽ More
ATLAS experiment, designed to probe the interactions of particles emerging out of proton proton collisions at energies of up to 14 TeV, will assume operation at the Large Hadron Collider (LHC) at CERN in 2007. This paper discusses the assembly and the quality control tests of forward detector modules for the ATLAS silicon microstrip detector assembled at the Instituto de Fisica Corpuscular (IFIC) in Valencia. The construction and testing procedures are outlined and the laboratory equipment is briefly described. Emphasis is given on the module quality achieved in terms of mechanical and electrical stability.
△ Less
Submitted 3 September, 2007;
originally announced September 2007.
-
Relativistic Calculation Of K$β$ Hypersatellite Energies and Transition Probabilities for Selected Atoms with 13<=Z<=80
Authors:
A. M. Costa,
M. C. Martins,
J. P. Santos,
Paul Indelicato,
F. Parente
Abstract:
Energies and transition probabilities of K$β$ hypersatellite lines are computed using the Dirac-Fock model for several values of $Z$ throughout the periodic table. The influence of the Breit interaction on the energy shifts from the corresponding diagram lines and on the K$β\_{1}^{\rm h}$/K$β\_{3}^{\rm h}$ intensity ratio is evaluated. The widths of the double-K hole levels are calculated for Al…
▽ More
Energies and transition probabilities of K$β$ hypersatellite lines are computed using the Dirac-Fock model for several values of $Z$ throughout the periodic table. The influence of the Breit interaction on the energy shifts from the corresponding diagram lines and on the K$β\_{1}^{\rm h}$/K$β\_{3}^{\rm h}$ intensity ratio is evaluated. The widths of the double-K hole levels are calculated for Al and Sc. The results are compared to experiment and to other theoretical calculations.
△ Less
Submitted 2 April, 2006;
originally announced April 2006.
-
Relativistic Calculation of two-Electron one-Photon and Hypersatellite Transition Energies for $12\leq Z\leq30$ Elements
Authors:
M. C. Martins,
A. M. Costa,
J. P. Santos,
F. Parente,
Paul Indelicato
Abstract:
Energies of two-electron one-photon transitions from initial double K-hole states were computed using the Dirac-Fock model. The transition energies of competing processes, the K$α$ hypersatellites, were also computed. The results are compared to experiment and to other theoretical calculations.
Energies of two-electron one-photon transitions from initial double K-hole states were computed using the Dirac-Fock model. The transition energies of competing processes, the K$α$ hypersatellites, were also computed. The results are compared to experiment and to other theoretical calculations.
△ Less
Submitted 24 August, 2004;
originally announced August 2004.