Showing 1–36 of 36 results for author: Costa, J

Beam test of a baseline vertex detector prototype for CEPC

Authors: Shuqi Li, Tianya Wu, Xinhui Huang, Jia Zhou, Ziyue Yan, Wei Wang, Hao Zeng, Yiming Hu, Xiaoxu Zhang, Zhijun Liang, Wei Wei, Ying Zhang, Xiaomin Wei, Lei Zhang, Ming Qi, Jun Hu, **yu Fu, Hongyu Zhang, Gang Li, Linghui Wu, Mingyi Dong, Xiaoting Li, Raimon Casanova, Liang Zhang, Jianing Dong , et al. (5 additional authors not shown)

Abstract: The Circular Electron Positron Collider (CEPC) has been proposed to enable more thorough and precise measurements of the properties of Higgs, W, and Z bosons, as well as to search for new physics. In response to the stringent performance requirements of the vertex detector for the CEPC, a baseline vertex detector prototype was tested and characterized for the first time using a 6 GeV electron beam… ▽ More The Circular Electron Positron Collider (CEPC) has been proposed to enable more thorough and precise measurements of the properties of Higgs, W, and Z bosons, as well as to search for new physics. In response to the stringent performance requirements of the vertex detector for the CEPC, a baseline vertex detector prototype was tested and characterized for the first time using a 6 GeV electron beam at DESY II Test Beam Line 21. The baseline vertex detector prototype is designed with a cylindrical barrel structure that contains six double-sided detector modules (ladders). Each side of the ladder includes TaichuPix-3 sensors based on Monolithic Active Pixel Sensor (MAPS) technology, a flexible printed circuit, and a carbon fiber support structure. Additionally, the readout electronics and the Data Acquisition system were also examined during this beam test. The performance of the prototype was evaluated using an electron beam that passed through six ladders in a perpendicular direction. The offline data analysis indicates a spatial resolution of about 5 um, with detection efficiency exceeding 99 % and an impact parameter resolution of about 5.1 um. These promising results from this baseline vertex detector prototype mark a significant step toward realizing the optimal vertex detector for the CEPC. △ Less

Submitted 1 April, 2024; originally announced April 2024.

Detection of Seismic Infrasonic Elephant Rumbles Using Spectrogram-Based Machine Learning

Authors: A. M. J. V. Costa, C. S. Pallikkonda, H. H. R. Hiroshan, G. R. U. Y. Gamlath, S. R. Munasinghe, C. U. S. Edussooriya

Abstract: This paper presents an effective method of identifying elephant rumbles in infrasonic seismic signals. The design and implementation of electronic circuitry to amplify, filter, and digitize the seismic signals captured through geophones are presented. A collection of seismic infrasonic elephant rumbles was collected at a free-ranging area of an elephant orphanage in Sri Lanka. The seismic rumbles… ▽ More This paper presents an effective method of identifying elephant rumbles in infrasonic seismic signals. The design and implementation of electronic circuitry to amplify, filter, and digitize the seismic signals captured through geophones are presented. A collection of seismic infrasonic elephant rumbles was collected at a free-ranging area of an elephant orphanage in Sri Lanka. The seismic rumbles were converted to spectrograms, and several methods were used for spectral feature extraction. Using LasyPredict, the features extracted using different methods were fed into their corresponding machine-learning algorithms to train them for automatic seismic rumble identification. It was found that the Mel frequency cepstral coefficient (MFCC) together with the Ridge classifier machine learning algorithm produced the best performance in identifying seismic elephant rumbles. A novel method for denoising the spectrum that leads to enhanced accuracy in identifying seismic rumbles is also presented. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 8 pages, 7 figures, journal

Beam test of a 180 nm CMOS Pixel Sensor for the CEPC vertex detector

Authors: Tianya Wu, Shuqi Li, Wei Wang, Jia Zhou, Ziyue Yan, Yiming Hu, Xiaoxu Zhang, Zhijun Liang, Wei Wei, Ying Zhang, Xiaomin Wei, Xinhui Huang, Lei Zhang, Ming Qi, Hao Zeng, Xuewei Jia, Jun Hu, **yu Fu, Hongyu Zhang, Gang Li, Linghui Wu, Mingyi Dong, Xiaoting Li, Raimon Casanova, Liang Zhang , et al. (6 additional authors not shown)

Abstract: The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of pixel size and material budget. A Monolithic Active Pixel Sensor (MAPS) prototype called TaichuPix, based on a column drain readout architecture, has been developed to address the need for high spatial resolution. In order to evaluate the performance of the TaichuPix-3 chips, a beam t… ▽ More The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of pixel size and material budget. A Monolithic Active Pixel Sensor (MAPS) prototype called TaichuPix, based on a column drain readout architecture, has been developed to address the need for high spatial resolution. In order to evaluate the performance of the TaichuPix-3 chips, a beam test was carried out at DESY II TB21 in December 2022. Meanwhile, the Data Acquisition (DAQ) for a muti-plane configuration was tested during the beam test. This work presents the characterization of the TaichuPix-3 chips with two different processes, including cluster size, spatial resolution, and detection efficiency. The analysis results indicate the spatial resolution better than 5 $μm$ and the detection efficiency exceeds 99.5 % for both TaichuPix-3 chips with the two different processes. △ Less

Submitted 10 November, 2023; originally announced November 2023.

Ground observations of a space laser for the assessment of its in-orbit performance

Authors: The Pierre Auger Collaboration, O. Lux, I. Krisch, O. Reitebuch, D. Huber, D. Wernham, T. Parrinello, :, A. Abdul Halim, P. Abreu, M. Aglietta, I. Allekotte, K. Almeida Cheminant, A. Almela, R. Aloisio, J. Alvarez-Muñiz, J. Ammerman Yebra, G. A. Anastasi, L. Anchordoqui, B. Andrada, S. Andringa, Anukriti, L. Apollonio, C. Aramo, P. R. Araújo Ferreira , et al. (358 additional authors not shown)

Abstract: The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the… ▽ More The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 10 pages, 10 figures

$P_{tail}^α$: a high resolution gamma/hadron and composition discriminant variable for Water-Cherenkov Detector cosmic-ray observatories

Authors: Ruben Conceição, Pedro J. Costa, Lucio Gibilisco, Mário Pimenta, Bernardo Tomé

Abstract: The precise and efficient identification of the nature of the primary cosmic rays on an event-by-event basis stands as a fundamental aspiration for any cosmic ray observatory. In particular, the detection and characterization of gamma ray events are challenged by their occurrence within an overwhelmingly greater flux of charged cosmic rays spanning several orders of magnitude. The intricacies of d… ▽ More The precise and efficient identification of the nature of the primary cosmic rays on an event-by-event basis stands as a fundamental aspiration for any cosmic ray observatory. In particular, the detection and characterization of gamma ray events are challenged by their occurrence within an overwhelmingly greater flux of charged cosmic rays spanning several orders of magnitude. The intricacies of distinguishing between cosmic ray compositions and the inherent uncertainties associated with hadronic interactions present formidable challenges, which, if not properly addressed, can introduce significant sources of systematic errors. This work introduces a novel composition discriminant variable, $P_{tail}^α$, which quantifies the number of Water Cherenkov Detectors with a signal well above the mean signal observed in WCDs located at an equivalent distance from the shower core, in events with approximately the same energy at the ground. This new event variable is then shown to be, in the reconstructed energy range $10\,{\rm TeV}$ to $1.6\,{\rm PeV}$, well correlated with the total number of muons that hit, in the same event, all the observatory stations located at a distance greater than $200\,{\rm m}$ from the shower core. The two variables should thus have similar efficiencies in the selection of high-purity gamma event samples and in the determination of the nature of charged cosmic ray events. △ Less

Submitted 27 June, 2024; v1 submitted 29 September, 2023; originally announced September 2023.

Comments: 6 pages, 7 figures

The Performance of AC-coupled Strip LGAD developed by IHEP

Authors: Weiyi Sun, Mengzhao Li, Zhijun Liang, Mei Zhao, Xiaoxu Zhang, Tianyuan Zhang, Yuan Feng, Shuqi Li, Xinhui Huang, Yunyun Fan, Tianya Wu, Xuan Yang, Bo Liu, Wei Wang. Yuekun Heng, Gaobo Xu, João Guimaraes da Costa

Abstract: The AC-coupled Strip LGAD (Strip AC-LGAD) is a novel LGAD design that diminishes the density of readout electronics through the use of strip electrodes, enabling the simultaneous measurement of time and spatial information. The Institute of High Energy Physics has designed a long Strip AC-LGAD prototype with a strip electrode length of 5.7 mm and pitches of 150 $μm$, 200 $μm$, and 250 $μm$. Spatia… ▽ More The AC-coupled Strip LGAD (Strip AC-LGAD) is a novel LGAD design that diminishes the density of readout electronics through the use of strip electrodes, enabling the simultaneous measurement of time and spatial information. The Institute of High Energy Physics has designed a long Strip AC-LGAD prototype with a strip electrode length of 5.7 mm and pitches of 150 $μm$, 200 $μm$, and 250 $μm$. Spatial and timing resolutions of the long Strip AC-LGAD are studied by pico-second laser test and beta source tests. The laser test demonstrates that spatial resolution improves as the pitch size decreases, with an optimal resolution achieved at 8.3 $μ$m. Furthermore, the Beta source test yields a timing resolution of 37.6 ps. △ Less

Submitted 2 May, 2024; v1 submitted 8 July, 2023; originally announced July 2023.

The New Small Wheel electronics

Authors: G. Iakovidis, L. Levinson, Y. Afik, C. Alexa, T. Alexopoulos, J. Ameel, D. Amidei, D. Antrim, A. Badea, C. Bakalis, H. Boterenbrood, R. S. Brener, S. Chan, J. Chapman, G. Chatzianastasiou, H. Chen, M. C. Chu, R. M. Coliban, T. Costa de Paiva, G. de Geronimo, R. Edgar, N. Felt, S. Francescato, M. Franklin, T. Geralis , et al. (77 additional authors not shown)

Abstract: The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector te… ▽ More The increase in luminosity, and consequent higher backgrounds, of the LHC upgrades require improved rejection of fake tracks in the forward region of the ATLAS Muon Spectrometer. The New Small Wheel upgrade of the Muon Spectrometer aims to reduce the large background of fake triggers from track segments that are not originated from the interaction point. The New Small Wheel employs two detector technologies, the resistive strip Micromegas detectors and the "small" Thin Gap Chambers, with a total of 2.45 Million electrodes to be sensed. The two technologies require the design of a complex electronics system given that it consists of two different detector technologies and is required to provide both precision readout and a fast trigger. It will operate in a high background radiation region up to about 20 kHz/cm$^{2}$ at the expected HL-LHC luminosity of $\mathcal{L}$=7.5$\times10^{34}$cm$^{-2}$s$^{-1}$. The architecture of the system is strongly defined by the GBTx data aggregation ASIC, the newly-introduced FELIX data router and the software based data handler of the ATLAS detector. The electronics complex of this new detector was designed and developed in the last ten years and consists of multiple radiation tolerant Application Specific Integrated Circuits, multiple front-end boards, dense boards with FPGA's and purpose-built Trigger Processor boards within the ATCA standard. The New Small Wheel has been installed in 2021 and is undergoing integration within ATLAS for LHC Run 3. It should operate through the end of Run 4 (December 2032). In this manuscript, the overall design of the New Small Wheel electronics is presented. △ Less

Submitted 25 May, 2023; v1 submitted 22 March, 2023; originally announced March 2023.

Comments: 61 pages

Journal ref: JINST 18 P05012 (2023)

Impacts of dielectric screening on the luminescence of monolayer WSe$_2$

Authors: Fabio J. R. Costa, Thiago G-L. Brito, Ingrid D. Barcelos, Luiz Fernando Zagonel

Abstract: Single layers of transition metal dichalcogenides, such as WSe$_2$ have gathered increasing attention due to their intense electron-hole interactions, being considered promising candidates for develo** novel optical applications. Within the few-layer regime, these systems become highly sensitive to the surrounding environment, enabling the possibility of using a proper substrate to tune desired… ▽ More Single layers of transition metal dichalcogenides, such as WSe$_2$ have gathered increasing attention due to their intense electron-hole interactions, being considered promising candidates for develo** novel optical applications. Within the few-layer regime, these systems become highly sensitive to the surrounding environment, enabling the possibility of using a proper substrate to tune desired aspects of these atomically-thin semiconductors. In this scenario, the dielectric environment provided by the substrates exerts significant influence on electronic and optical properties of these layered materials, affecting the electronic band-gap and the exciton binding energy. However, the corresponding effect on the luminescence of transition metal dichalcogenides is still under discussion. To elucidate these impacts, we used a broad set of materials as substrates for single-layers of WSe$_2$, enabling the observation of these effects over a wide range of electrical permittivities. Our results demonstrate that an increasing permittivity induces a systematic red-shift of the optical band-gap of WSe$_2$, intrinsically related to a considerable reduction of the luminescence intensity. Moreover, we annealed the samples to ensure a tight coupling between WSe$_2$and its substrates, reducing the effect of undesired adsorbates trapped in the interface. Ultimately, our findings reveal how critical the annealing temperature can be, indicating that above a certain threshold, the heating treatment can induce adverse impacts on the luminescence. Furthermore, our conclusions highlight the influence the dielectric properties of the substrate have on the luminescence of WSe$_2$, showing that a low electrical permittivity favours preserving the native properties of the adjacent monolayer △ Less

Submitted 15 March, 2023; originally announced March 2023.

Comments: 16 pages, 8 figures

Journal ref: Nanotechnology 34 385703 2023

Performance in beam tests of Carbon-enriched irradiated Low Gain Avalanche Detectors for the ATLAS High Granularity Timing Detector

Authors: S. Ali, H. Arnold, S. L. Auwens, L. A. Beresford, D. E. Boumediene, A. M. Burger, L. Cadamuro, L. Castillo García, L. D. Corpe, M. J. Da Cunha Sargedas de Sousa, D. Dannheim, V. Dao, A. Gabrielli, Y. El Ghazali, H. El Jarrari, V. Gautam, S. Grinstein, J. Guimarães da Costa, S. Guindon, X. Jia, G. Kramberger, Y. Liu, K. Ma, N. Makovec, S. Manzoni , et al. (12 additional authors not shown)

Abstract: The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation env… ▽ More The High Granularity Timing Detector (HGTD) will be installed in the ATLAS experiment to mitigate pile-up effects during the High Luminosity (HL) phase of the Large Hadron Collider (LHC) at CERN. Low Gain Avalanche Detectors (LGADs) will provide high-precision measurements of the time of arrival of particles at the HGTD, improving the particle-vertex assignment. To cope with the high-radiation environment, LGADs have been optimized by adding carbon in the gain layer, thus reducing the acceptor removal rate after irradiation. Performances of several carbon-enriched LGAD sensors from different vendors, and irradiated with high fluences of 1.5 and 2.5 x 10^15 neq/cm2, have been measured in beam test campaigns during the years 2021 and 2022 at CERN SPS and DESY. This paper presents the results obtained with data recorded by an oscilloscope synchronized with a beam telescope which provides particle position information within a resolution of a few um. Collected charge, time resolution and hit efficiency measurements are presented. In addition, the efficiency uniformity is also studied as a function of the position of the incident particle inside the sensor pad. △ Less

Submitted 17 March, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Characterization of the response of IHEP-IME LGAD with shallow carbon to Gamma Irradiation

Authors: Weiyi Sun, Yunyun Fan, Mei Zhao, Han Cui, Chengjun Yu, Shuqi Li, Yuan Feng, Xinhui Huang, Zhijun Liang, Xuewei Jia, Wei Wang, Tianya Wu, Mengzhao Li, João Guimarães da Costa, Gaobo Xu

Abstract: Low Gain Avalanche Detectors (LGAD) for the High-Granularity Timing Detector (HGTD) are crucial in reducing pileups in the High-Luminosity Large Hadron Collider. Numerous studies have been conducted on the bulk irradiation damage of LGADs. However, few studies have been carried out on the surface irradiation damage of LGAD sensors with shallow carbon implantation. In this paper, the IHEP-IME LGADs… ▽ More Low Gain Avalanche Detectors (LGAD) for the High-Granularity Timing Detector (HGTD) are crucial in reducing pileups in the High-Luminosity Large Hadron Collider. Numerous studies have been conducted on the bulk irradiation damage of LGADs. However, few studies have been carried out on the surface irradiation damage of LGAD sensors with shallow carbon implantation. In this paper, the IHEP-IME LGADs with shallow carbon implantation were irradiated up to 2 MGy using gamma irradiation to investigate surface damage. Important characteristic parameters, including leakage currents, breakdown voltage (BV), inter-pad resistances, and capacitances, were tested before and after irradiation. The results showed that the leakage current and BV increased after irradiation, whereas overall inter-pad resistance exhibited minimal change and remained above $10^9\ Ω$ before and after irradiation. Capacitance was found to be less than 4.5 pF with a slight decrease in the gain layer depletion voltage (V$_{gl}$) after irradiation. No parameter affected by the inter-pad separation was observed before and after irradiation. All characteristic parameters meet the requirements of HGTD, and this design can be used to further optimization. △ Less

Submitted 8 June, 2023; v1 submitted 10 March, 2023; originally announced March 2023.

A platform for trapped cryogenic electrons, anions and cations for fundamental physics and chemical studies

Authors: Levi O. A. Azevedo, Rodolfo J. S. Costa, Wania Wolff, Alvaro N. Oliveira, Rodrigo L. Sacramento, Daniel M. Silveira, Claudio L. Cesar

Abstract: Cryogenic cations, electrons and anions are ubiquitous in space, participate on star formation chemistry and are relevant to studies on the origin of molecular biology homochirality. We report on a system to directly generate and trap these species in the laboratory. Laser ablation of a solid target (LiH) facing a sublimating Ne matrix generates cryogenic electrons, anions, and cations. Axial ener… ▽ More Cryogenic cations, electrons and anions are ubiquitous in space, participate on star formation chemistry and are relevant to studies on the origin of molecular biology homochirality. We report on a system to directly generate and trap these species in the laboratory. Laser ablation of a solid target (LiH) facing a sublimating Ne matrix generates cryogenic electrons, anions, and cations. Axial energy distributions (of e$^-$, H$^\pm$, Li$^\pm$) peaked at 0-25 meV are obtained in a Penning trap at 90 mT and 0.5 eV barrier. Anions can be guided and turned neutral with low recoil energy by near-threshold photodetachment. An immediate prospect for this H$^-$ source is to load hydrogen atoms into the ALPHA antihydrogen trap at CERN towards direct spectroscopic comparison of both conjugated species beyond 13 significant figures. The production is scalable and adaptable to different species including deuterium and tritium, relevant for neutrino mass and fusion research. △ Less

Submitted 30 January, 2023; originally announced January 2023.

Comments: 22 pages, 9 figures

Deep-pretrained-FWI: combining supervised learning with physics-informed neural network

Authors: Ana Paula O. Muller, Clecio R. Bom, Jessé C. Costa, Matheus Klatt, Elisângela L. Faria, Marcelo P. de Albuquerque, Márcio P. de Albuquerque

Abstract: An accurate velocity model is essential to make a good seismic image. Conventional methods to perform Velocity Model Building (VMB) tasks rely on inverse methods, which, despite being widely used, are ill-posed problems that require intense and specialized human supervision. Convolutional Neural Networks (CNN) have been extensively investigated as an alternative to solve the VMB task. Two main app… ▽ More An accurate velocity model is essential to make a good seismic image. Conventional methods to perform Velocity Model Building (VMB) tasks rely on inverse methods, which, despite being widely used, are ill-posed problems that require intense and specialized human supervision. Convolutional Neural Networks (CNN) have been extensively investigated as an alternative to solve the VMB task. Two main approaches were investigated in the literature: supervised training and Physics-Informed Neural Networks (PINN). Supervised training presents some generalization issues since structures, and velocity ranges must be similar in training and test set. Some works integrated Full-waveform Inversion (FWI) with CNN, defining the problem of VMB in the PINN framework. In this case, the CNN stabilizes the inversion, acting like a regularizer and avoiding local minima-related problems and, in some cases, sparing an initial velocity model. Our approach combines supervised and physics-informed neural networks by using transfer learning to start the inversion. The pre-trained CNN is obtained using a supervised approach based on training with a reduced and simple data set to capture the main velocity trend at the initial FWI iterations. We show that transfer learning reduces the uncertainties of the process, accelerates model convergence, and improves the final scores of the iterative process. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: Paper present at machine Learning and the Physical Sciences workshop, NeurIPS 2022

Design and testing of LGAD sensor with shallow carbon implantation

Authors: Kewei Wu, Xuewei Jia, Tao Yang, Mengzhao Li, Wei Wang, Mei Zhao, Zhijun Liang, Joao Guimaraes da Costa, Yunyun Fan, Han Cui, Alissa Howard, Gregor Kramberger, Xin Shi, Yuekun Heng, Yuhang Tan, Bo Liu, Yuan Feng, Shuqi Li, Mengran Li, Chengjun Yu, Xuan Yang, Mingjie Zhai, Gaobo Xu, Gang** Yan, Qionghua Zhai , et al. (4 additional authors not shown)

Abstract: The low gain avalanche detectors (LGADs) are thin sensors with fast charge collection which in combination with internal gain deliver an outstanding time resolution of about 30 ps. High collision rates and consequent large particle rates crossing the detectors at the upgraded Large Hadron Collider (LHC) in 2028 will lead to radiation damage and deteriorated performance of the LGADs. The main conse… ▽ More The low gain avalanche detectors (LGADs) are thin sensors with fast charge collection which in combination with internal gain deliver an outstanding time resolution of about 30 ps. High collision rates and consequent large particle rates crossing the detectors at the upgraded Large Hadron Collider (LHC) in 2028 will lead to radiation damage and deteriorated performance of the LGADs. The main consequence of radiation damage is loss of gain layer do** (acceptor removal) which requires an increase of bias voltage to compensate for the loss of charge collection efficiency and consequently time resolution. The Institute of High Energy Physics (IHEP), Chinese Academy of Sciences (CAS) has developed a process based on the Institute of Microelectronics (IME), CAS capability to enrich the gain layer with carbon to reduce the acceptor removal effect by radiation. After 1 MeV neutron equivalent fluence of 2.5$\times$10$^{15}$ n$_{eq}$/cm$^{2}$, which is the maximum fluence to which sensors will be exposed at ATLAS High Granularity Timing Detector (HGTD), the IHEP-IME second version (IHEP-IMEv2) 50 $μ$m LGAD sensors already deliver adequate charge collection > 4 fC and time resolution < 50 ps at voltages < 400 V. The operation voltages of these 50 $μ$m devices are well below those at which single event burnout may occur. △ Less

Submitted 31 May, 2022; v1 submitted 10 May, 2022; originally announced May 2022.

Deep-tomography: iterative velocity model building with deep learning

Authors: Ana Paula O. Muller, Clecio R. Bom, Jesse C. Costa, Matheus Klatt, Elisangela L. Faria, Bruno dos Santos Silva, Marcelo P. de Albuquerque, Marcio P. de Albuquerque

Abstract: The accurate and fast estimation of velocity models is crucial in seismic imaging. Conventional methods, like Tomography and Full-Waveform Inversion (FWI), obtain appropriate velocity models; however, they require intense and specialized human supervision and consume much time and computational resources. In recent years, some works investigated deep learning(DL) algorithms to obtain the velocity… ▽ More The accurate and fast estimation of velocity models is crucial in seismic imaging. Conventional methods, like Tomography and Full-Waveform Inversion (FWI), obtain appropriate velocity models; however, they require intense and specialized human supervision and consume much time and computational resources. In recent years, some works investigated deep learning(DL) algorithms to obtain the velocity model directly from shots or migrated angle panels, obtaining encouraging predictions of synthetic models. This paper proposes a new flow to increase the complexity of velocity models recovered with DL. Inspired by the conventional geophysical velocity model building methods, instead of predicting the entire model in one step, we predict the velocity model iteratively. We implement the iterative nature of the process when, for each iteration, we train the DL algorithm to determine the velocity model with a certain level of precision/resolution for the next iteration; we name this process as Deep-Tomography. Starting from an initial model that roughly approaches the true model, the Deep-Tomography is able to predict an appropriate final model, even in complete unseen data, like the Marmousi model. △ Less

Submitted 5 December, 2022; v1 submitted 22 April, 2022; originally announced April 2022.

Comments: 27 pages, 9 figures. First manuscript version submitted to Geophysical Journal International in February 2022

Journal ref: Volume 232, Issue 2, February 2023, Page 975

Complete identification of complex salt geometries from inaccurate migrated subsurface offset gathers using deep learning

Authors: Ana Paula O. Muller, Jesse C. Costa, Clecio R. Bom, Elisangela L. Faria, Matheus Klatt, Gabriel Teixeira, Marcelo P. de Albuquerque, Marcio P. de Albuquerque

Abstract: Delimiting salt inclusions from migrated images is a time-consuming activity that relies on highly human-curated analysis and is subject to interpretation errors or limitations of the methods available. We propose to use migrated images produced from an inaccurate velocity model (with a reasonable approximation of sediment velocity, but without salt inclusions) to predict the correct salt inclusio… ▽ More Delimiting salt inclusions from migrated images is a time-consuming activity that relies on highly human-curated analysis and is subject to interpretation errors or limitations of the methods available. We propose to use migrated images produced from an inaccurate velocity model (with a reasonable approximation of sediment velocity, but without salt inclusions) to predict the correct salt inclusions shape using a Convolutional Neural Network (CNN). Our approach relies on subsurface Common Image Gathers to focus the sediments' reflections around the zero offset and to spread the energy of salt reflections over large offsets. Using synthetic data, we trained a U-Net to use common-offset subsurface images as input channels for the CNN and the correct salt-masks as network output. The network learned to predict the salt inclusions masks with high accuracy; moreover, it also performed well when applied to synthetic benchmark data sets that were not previously introduced. Our training process tuned the U-Net to successfully learn the shape of complex salt bodies from partially focused subsurface offset images. △ Less

Submitted 5 December, 2022; v1 submitted 20 April, 2022; originally announced April 2022.

Comments: Manuscript published at Geophysics

Journal ref: Geophysics 87 2022

Effects of shallow carbon and deep N++ layer on the radiation hardness of IHEP-IME LGAD sensors

Authors: Mengzhao Li, Yunyun Fan, Xuewei Jia, Han Cui, Zhijun Liang, Mei Zhao, Tao Yang, Kewei Wu, Shuqi Li, Chengjun Yu, Bo Liu, Wei Wang, Xuan Yang, Yuhang Tan, Xin Shi, J. G. da Costa, Yuekun Heng, Gaobo Xu, Qionghua Zhai, Gang** Yan, Mingzheng Ding, Jun Luo, Huaxiang Yin, Junfeng Li, Alissa Howard , et al. (1 additional authors not shown)

Abstract: Low Gain Avalanche Diode (LGAD) is applied for the High-Granularity Timing Detector (HGTD), and it will be used to upgrade the ATLAS experiment. The first batch IHEP-IME LGAD sensors were designed by the Institute of High Energy Physics (IHEP) and fabricated by the Institute of Microelectronics (IME). Three IHEP-IME sensors (W1, W7 and W8) were irradiated by the neutrons up to the fluence of 2.5 x… ▽ More Low Gain Avalanche Diode (LGAD) is applied for the High-Granularity Timing Detector (HGTD), and it will be used to upgrade the ATLAS experiment. The first batch IHEP-IME LGAD sensors were designed by the Institute of High Energy Physics (IHEP) and fabricated by the Institute of Microelectronics (IME). Three IHEP-IME sensors (W1, W7 and W8) were irradiated by the neutrons up to the fluence of 2.5 x 10^15 n_eq/cm^2 to study the effect of the shallow carbon and deep N++ layer on the irradiation hardness. Taking W7 as a reference, W1 has an extra shallow carbon applied, and W8 has a deeper N++ layer. △ Less

Submitted 25 October, 2021; originally announced October 2021.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Low Gain Avalanche Detectors with Good Time Resolution Developed by IHEP and IME for ATLAS HGTD project

Authors: Mei Zhao, Xuewei Jia, Kewei Wu, Tao Yang, Mengzhao Li, Yunyun Fan, Gang** Yan, Wei Wang, Mengran Li, Gaobo Xu, Mingzheng Ding, Huaxiang Yin, Jun Luo, Junfeng Li, Xin Shi, Zhijun Liang, João Guimarães da Costa

Abstract: This paper shows the simulation and test results of 50um thick Low Gain Avalanche Detectors (LGAD) sensors designed by the Institute of High Energy Physics (IHEP) and fabricated by the Institute of Microelectronics of the Chinese Academy of Sciences (IME). Three wafers have been produced with four different gain layer implant doses each. Different production processes, including variation in the n… ▽ More This paper shows the simulation and test results of 50um thick Low Gain Avalanche Detectors (LGAD) sensors designed by the Institute of High Energy Physics (IHEP) and fabricated by the Institute of Microelectronics of the Chinese Academy of Sciences (IME). Three wafers have been produced with four different gain layer implant doses each. Different production processes, including variation in the n++ layer implant energy and carbon co-implantation were used. Test results show that the IHEP-IME sensors with the higher dose of gain layer have lower breakdown voltages and higher gain layer voltages from capacitance-voltage properties, which are consistent with the TCAD simulation. Beta test results show that the time resolution of IHEP-IME sensors is better than 35ps when operated at high voltage and the collected charges of IHEP-IME sensors are larger than 15fC before irradiation, which fulfill the required specifications of sensors before irradiations for the ATLAS HGTD project. △ Less

Submitted 21 January, 2022; v1 submitted 23 September, 2021; originally announced September 2021.

Comments: 11 pages,8 figures

The TaichuPix1: A Monolithic Active Pixel Sensor with fast in-pixel readout electronics for the CEPC vertex detector

Authors: T. Wu, S. Grinstein, R. Casanova, Y. Zhang, W. Wei, X. Wei, J. Dong, L. Zhang, X. Li, Z. Liang, J. Guimaraes da Costa, W. Lu, L. Li, J. Wang, R. Zheng, P. Yang, G. Huang

Abstract: The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of high resolution, low material, fast readout and low power. The Monolithic Active Pixel Sensor (MAPS) technology has been chosen as one of the most promising candidates to satisfy these requirements. A MAPS prototype, called TaichuPix1, based on a data-driven structure, together with a… ▽ More The proposed Circular Electron Positron Collider (CEPC) imposes new challenges for the vertex detector in terms of high resolution, low material, fast readout and low power. The Monolithic Active Pixel Sensor (MAPS) technology has been chosen as one of the most promising candidates to satisfy these requirements. A MAPS prototype, called TaichuPix1, based on a data-driven structure, together with a column drain readout architecture, benefiting from the ALPIDE and FE-I3 approaches, has been implemented to achieve fast readout. This paper presents the overall architecture of TaichuPix1, the experimental characterization of the FE-I3-like matrix, the threshold dispersion, the noise distribution of the pixels and verifies the charge collection using a radioactive source. These results prove the functionality of the digital periphery and serializer are able to transmit the collected charge to the data interface correctly. Moreover, the individual self-tests of the serializer verify it can work up to about 3 Gbps. And it also indicates that the analog front-end features a fast-rising signal with a short time walk and that the FE-I3-like in-pixel digital logic is properly operating at the 40 MHz system clock. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Comments: 14 pages and 12 figures

The performance of IHEP-NDL LGAD sensors after neutron irradiation

Authors: Mengzhao Li, Yunyun Fan, Bo Liu, Han Cui, Xuewei Jia, Shuqi Li, Chengjun Yu, Xuan Yang, Wei Wang, Mingjie Zhai, Tao Yang, Kewei Wu, Yuhang Tan, Suyu Xiao, Mei Zhao, Xin Shi, Zhijun Liang, Yuekun Heng, Joao Guimaraes da Costa, Xingan Zhang, Dejun Han, Alissa Howard, Gregor Kramberger

Abstract: The performances of Low Gain Avalanche diode (LGAD) sensors from a neutron irradiation campaign with fluences of 0.8 x 10^15, 15 x 10^15 and 2.5 x 10^15 neq/cm2 are reported in this article. These LGAD sensors are developed by the Institute of High Energy Physics, Chinese Academy of Sciences and the Novel Device Laboratory for the High Granularity Timing Detector of the High Luminosity Large Hadro… ▽ More The performances of Low Gain Avalanche diode (LGAD) sensors from a neutron irradiation campaign with fluences of 0.8 x 10^15, 15 x 10^15 and 2.5 x 10^15 neq/cm2 are reported in this article. These LGAD sensors are developed by the Institute of High Energy Physics, Chinese Academy of Sciences and the Novel Device Laboratory for the High Granularity Timing Detector of the High Luminosity Large Hadron Collider. The timing resolution and collected charge of the LGAD sensors were measured with electrons from a beta source. After irradiation with a fluence of 2.5 x 10^15 neq/cm2, the collected charge decreases from 40 fC to 7 fC, the signal-to-noise ratio deteriorates from 48 to 12, and the timing resolution increases from 29 ps to 39 ps. △ Less

Submitted 7 July, 2021; originally announced July 2021.

Leakage current simulations of Low Gain Avalanche Diode with improved Radiation Damage Modeling

Authors: Tao Yang, Kewei Wu, Mei Zhao, Xuewei Jia, Yuhang Tan, Suyu Xiao, Kai Liu, Xiyuan Zhang, Congcong Wang, Mengzhao Li, Yunyun Fan, Shuqi Li, Chengjun Yu, Han Cui, Hao Zeng, Mingjie Zhai, Shuiting Xin, Maoqiang **g, Gang** Yan, Qionghua Zhai, Mingzheng Ding, Gaobo Xu, Huaxiang Yin, Gregor Kramberger, Zhijun Liang , et al. (2 additional authors not shown)

Abstract: We report precise TCAD simulations of IHEP-IME-v1 Low Gain Avalanche Diode (LGAD) calibrated by secondary ion mass spectroscopy (SIMS). Our setup allows us to evaluate the leakage current, capacitance, and breakdown voltage of LGAD, which agree with measurements' results before irradiation. And we propose an improved LGAD Radiation Damage Model (LRDM) which combines local acceptor removal with glo… ▽ More We report precise TCAD simulations of IHEP-IME-v1 Low Gain Avalanche Diode (LGAD) calibrated by secondary ion mass spectroscopy (SIMS). Our setup allows us to evaluate the leakage current, capacitance, and breakdown voltage of LGAD, which agree with measurements' results before irradiation. And we propose an improved LGAD Radiation Damage Model (LRDM) which combines local acceptor removal with global deep energy levels. The LRDM is applied to the IHEP-IME-v1 LGAD and able to predict the leakage current well at -30 $^{\circ}$C after an irradiation fluence of $ Φ_{eq}=2.5 \times 10^{15} ~n_{eq}/cm^{2}$. The charge collection efficiency (CCE) is under development. △ Less

Submitted 30 September, 2022; v1 submitted 29 June, 2021; originally announced June 2021.

The large inner Micromegas modules for the Atlas Muon Spectrometer Upgrade: construction, quality control and characterization

Authors: J. Allard, M. Anfreville, N. Andari, D. Attié, S. Aune, H. Bachacou, F. Balli, F. Bauer, J. Bennet, T. Benoit, J. Beltramelli, H. Bervas, T. Bey, S. Bouaziz, M. Boyer, T. Challey, T. Chevalérias, X. Copollani, J. Costa, G. Cara, G. Decock, F. Deliot, D. Denysiuk, D. Desforge, G. Disset , et al. (49 additional authors not shown)

Abstract: The steadily increasing luminosity of the LHC requires an upgrade with high-rate and high-resolution detector technology for the inner end cap of the ATLAS muon spectrometer: the New Small Wheels (NSW). In order to achieve the goal of precision tracking at a hit rate of about 15 kHz/cm$^2$ at the inner radius of the NSW, large area Micromegas quadruplets with 100\,\microns spatial resolution per p… ▽ More The steadily increasing luminosity of the LHC requires an upgrade with high-rate and high-resolution detector technology for the inner end cap of the ATLAS muon spectrometer: the New Small Wheels (NSW). In order to achieve the goal of precision tracking at a hit rate of about 15 kHz/cm$^2$ at the inner radius of the NSW, large area Micromegas quadruplets with 100\,\microns spatial resolution per plane have been produced. % IRFU, from the CEA research center of Saclay, is responsible for the production and validation of LM1 Micromegas modules. The construction, production, qualification and validation of the largest Micromegas detectors ever built are reported here. Performance results under cosmic muon characterisation will also be discussed. △ Less

Submitted 28 May, 2021; originally announced May 2021.

Comments: To be submitted to NIMA

Compact tunable YIG-based RF resonators

Authors: José Diogo Costa, Bruno Figeys, Xiao Sun, Nele Van Hoovels, Harrie A. C. Tilmans, Florin Ciubotaru, Christoph Adelmann

Abstract: We report on the design, fabrication, and characterization of compact tunable yttrium iron garnet (YIG) based RF resonators based on $μ$m-sized spin-wave cavities. Inductive antennas with both ladder and meander configurations were used as transducers between spin waves and RF signals. The excitation of ferromagnetic resonance and standing spin waves in the YIG cavities led to sharp resonances wit… ▽ More We report on the design, fabrication, and characterization of compact tunable yttrium iron garnet (YIG) based RF resonators based on $μ$m-sized spin-wave cavities. Inductive antennas with both ladder and meander configurations were used as transducers between spin waves and RF signals. The excitation of ferromagnetic resonance and standing spin waves in the YIG cavities led to sharp resonances with quality factors up to 350. The observed spectra were in excellent agreement with a model based on the spin-wave dispersion relations in YIG, showing a high magnetic field tunability of about 29 MHz/mT. △ Less

Submitted 27 April, 2021; v1 submitted 8 January, 2021; originally announced January 2021.

Comments: 13 pages, 5 figures. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 801055 "Spin Wave Computing for Ultimately-Scaled Hybrid Low-Power Electronics" - CHIRON

Journal ref: Appl. Phys. Lett. 118, 162406 (2021)

The ABC130 barrel module prototy** programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototy** programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototy** program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

Beam test results of IHEP-NDL Low Gain Avalanche Detectors(LGAD)

Authors: S. Xiao, S. Alderweireldt, S. Ali, C. Allaire, C. Agapopoulou, N. Atanov, M. K. Ayoub, G. Barone, D. Benchekroun, A. Buzatu, D. Caforio, L. Castillo García, Y. Chan, H. Chen, V. Cindro, L. Ciucu, J. Barreiro Guimarães da Costa, H. Cui, F. Davó Miralles, Y. Davydov, G. d'Amen, C. de la Taille, R. Kiuchi, Y. Fan, A. Falou , et al. (75 additional authors not shown)

Abstract: To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated wi… ▽ More To meet the timing resolution requirement of up-coming High Luminosity LHC (HL-LHC), a new detector based on the Low-Gain Avalanche Detector(LGAD), High-Granularity Timing Detector (HGTD), is under intensive research in ATLAS. Two types of IHEP-NDL LGADs(BV60 and BV170) for this update is being developed by Institute of High Energy Physics (IHEP) of Chinese Academic of Sciences (CAS) cooperated with Novel Device Laboratory (NDL) of Bei**g Normal University and they are now under detailed study. These detectors are tested with $5GeV$ electron beam at DESY. A SiPM detector is chosen as a reference detector to get the timing resolution of LGADs. The fluctuation of time difference between LGAD and SiPM is extracted by fitting with a Gaussian function. Constant fraction discriminator (CFD) method is used to mitigate the effect of time walk. The timing resolution of $41 \pm 1 ps$ and $63 \pm 1 ps$ are obtained for BV60 and BV170 respectively. △ Less

Submitted 14 May, 2020; originally announced May 2020.

A methodology to evaluate the evolution of networks using topological data analysis

Authors: Joao Pita Costa, Tihana Galinac Grbac

Abstract: Networks are important representations in computer science to communicate structural aspects of a given system of interacting components. The evolution of a network has several topological properties that can provide us information on the network itself. In this paper, we present a methodology to compare the the topological characteristics of the evolution of a network, encoded into a (persistence… ▽ More Networks are important representations in computer science to communicate structural aspects of a given system of interacting components. The evolution of a network has several topological properties that can provide us information on the network itself. In this paper, we present a methodology to compare the the topological characteristics of the evolution of a network, encoded into a (persistence) diagram that tracks the lifetimes of those features. This will enable us to classify the evolution of networks based on the distance between the diagrams that represent such network evolution. In that, we also consider complex vectors that bring a complementary perspective to the distance-based classification that is closer to the computational methods, aims to enhance the computational efficiency of those comparisons, and that is by itself a source of open research questions. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: Published in the proceedings of SIKDD 2017: https://ailab.ijs.si/dunja/SiKDD2017/Papers/PitaCosta_RJK.pdf

MSC Class: 68T30; 55U05 ACM Class: D.2; E.1; H.3

Journal ref: SIKDD 2017 Proceedings

Radiation Campaign of HPK Prototype LGAD sensors for the High-Granularity Timing Detector (HGTD)

Authors: X. Shi, M. K. Ayoub, J. Barreiro Guimarães da Costa, H. Cui, R. Kiuchi, Y. Fan, S. Han, Y. Huang, M. **g, Z. Liang, B. Liu, J. Liu, F. Lyu, B. Qi, K. Ran, L. Shan, L. Shi, Y. Tan, K. Wu, S. Xiao, T. Yang, Y. Yang, C. Yu, M. Zhao, X. Zhuang , et al. (52 additional authors not shown)

Abstract: We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the co… ▽ More We report on the results of a radiation campaign with neutrons and protons of Low Gain Avalanche Detectors (LGAD) produced by Hamamatsu (HPK) as prototypes for the High-Granularity Timing Detector (HGTD) in ATLAS. Sensors with an active thickness of 50~$μ$m were irradiated in steps of roughly 2$\times$ up to a fluence of $3\times10^{15}~\mathrm{n_{eq}cm^{-2}}$. As a function of the fluence, the collected charge and time resolution of the irradiated sensors will be reported for operation at $-30^{\circ}$. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Layout and Performance of HPK Prototype LGAD Sensors for the High-Granularity Timing Detector

Authors: X. Yang, S. Alderweireldt, N. Atanov, M. K. Ayoub, J. Barreiro Guimaraes da Costa, L. Castillo Garcia, H. Chen, S. Christie, V. Cindro, H. Cui, G. D'Amen, Y. Davydov, Y. Y. Fan, Z. Galloway, J. J. Ge, C. Gee, G. Giacomini, E. L. Gkougkousis, C. Grieco, S. Grinstein, J. Grosse-Knetter, S. Guindon, S. Han, A. Howard, Y. P. Huang , et al. (54 additional authors not shown)

Abstract: The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising… ▽ More The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising edge, which improve significantly the signal-to-noise ratio. The required average timing resolution per track for a minimum-ionising particle is 30 ps at the start and 50 ps at the end of the HL-LHC operation. This is achieved with several layers of LGAD. The innermost region of the detector would accumulate a 1 MeV-neutron equivalent fluence up to $2.5 \times 10^{15} cm^{-2}$ before being replaced during the scheduled shutdowns. The addition of this new detector is expected to play an important role in the mitigation of high pile-up at the HL-LHC. The layout and performance of the various versions of LGAD prototypes produced by Hamamatsu (HPK) have been studied by the ATLAS Collaboration. The breakdown voltages, depletion voltages, inter-pad gaps, collected charge as well as the time resolution have been measured and the production yield of large size sensors has been evaluated. △ Less

Submitted 31 March, 2020; originally announced March 2020.

Comments: 17 pages, 20 figures

Analysis of cosmic rays' atmospheric effects and their relationships to cutoff rigidity and zenith angle using Global Muon Detector Network data

Authors: R. R. S. Mendonça, C. Wang, C. R. Braga, E. Echer, A. Dal Lago, J. E. R. Costa, K. Munakata, H. Li, Z. Liu, J. -P. Raulin, T. Kuwabara, M. Kozai, C. Kato, M. Rockenbach, N. J. Schuch, H. K. Al Jassar, M. M. Sharma, M. Tokumaru, M. L. Duldig, J. E. Humble, P. Evenson, I. Sabbah

Abstract: Cosmic rays are charged particles whose flux observed at Earth shows temporal variations related to space weather phenomena and may be an important tool to study them. The cosmic ray intensity recorded with ground-based detectors also shows temporal variations arising from atmospheric variations. In the case of muon detectors, the main atmospheric effects are related to pressure and temperature ch… ▽ More Cosmic rays are charged particles whose flux observed at Earth shows temporal variations related to space weather phenomena and may be an important tool to study them. The cosmic ray intensity recorded with ground-based detectors also shows temporal variations arising from atmospheric variations. In the case of muon detectors, the main atmospheric effects are related to pressure and temperature changes. In this work, we analyze both effects using data recorded by the Global Muon Detector Network (GMDN), consisting of four multidirectional muon detectors at different locations, in the period between 2007 and 2016. For each GMDN directional channel, we obtain coefficients that describe the pressure and temperature effects. We then analyze how these coefficients can be related to the geomagnetic cutoff rigidity and zenith angle associated with cosmic-ray particles observed by each channel. In the pressure effect analysis, we found that the observed barometric coefficients show a very clear logarithmic correlation with the cutoff rigidity divided by the zenith angle cosine. On the other hand, the temperature coefficients show a good logarithmic correlation with the product of the cutoff and zenith angle cosine after adding a term proportional to the sine of geographical latitude of the observation site. This additional term implies that the temperature effect measured in the northern hemisphere detectors is stronger than that observed in the southern hemisphere. The physical origin of this term and of the good correlations found in this analysis should be studied in detail in future works. △ Less

Submitted 14 October, 2019; originally announced October 2019.

Ground/space, passive/active remote sensing observations coupled with particle dispersion modelling to understand the inter-continental transport of wildfire smoke plumes

Authors: M. Sicard, M. J. Granados-Munoz, L. Alados-Arboledas, R. Barragan, A. E. Bedoya-Velasquez, J. A. Benavent-Oltra, D. Bortoli, A. Comeron, C. Cordoba-Jabonero, M. J. Costa, A. del Aguila, A. J. Fernandez, J. L. Guerrero-Rascado, O. Jorba, F. Molero, C. Munoz-Porcar, P. Ortiz-Amezcua, N. Papagiannopoulos, M. Potes, M. Pujadas, F. Rocadenbosch, A. Rodriguez-Gomez, R. Roman, R. Salgado, V. Salgueiro , et al. (2 additional authors not shown)

Abstract: During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a… ▽ More During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a few days later on 7 and 8 September. Satellite imagery allows to identify two main smoke clouds emitted during two different periods that were injected and transported in the atmosphere at several altitude levels. Columnar properties on 7 and 8 September at two Aerosol Robotic Network (AERONET) mid-altitude, background sites in northern and southern Spain are: aerosol optical depth (AOD) at 440 nm up to 0.62, Angstrom exponent of 1.6-1.7, large dominance of small particles (fine mode fraction > 0.88), low absorption AOD at 440 nm (<0.008) and large single scattering albedo at 440 nm (>0.98). Profiles from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) show the presence of smoke particles in the stratosphere during the transport, whereas the smoke is only observed in the troposphere at its arrival over the IP. Portuguese and Spanish ground lidar stations from the European Aerosol Research Lidar Network / Aerosols, Clouds, and Trace gases Research InfraStructure Network (EARLINET/ACTRIS) and the Micro-Pulse Lidar NETwork (MPLNET) reveal smoke plumes with different properties: particle depolarization ratio and color ratio, respectively, of 0.05 and 2.5 in the mid troposphere (5-9 km) and of 0.10 and 3.0 in the upper troposphere (10-13 km). In the mid troposphere the particle depolarization ratio does not seem time-dependent during the transport whereas the color ratio seems to increase (larger particles sediment first). △ Less

Submitted 23 July, 2019; originally announced July 2019.

Comments: 19 pages, 10 figures

Journal ref: Remote Sensing of the Environment, vol. 232, year 2019

The role of local field modes in calculating the effective optical properties of metamaterials

Authors: Anderson O. Silva, Ivo T. Leite, José M. Teixeira, João C. W. A. Costa, Maria T. M. R. Giraldi, Ariel Guerreiro

Abstract: This letter discusses the importance of the nature of local fields inside a unit cell of optical metamaterials in develo** a valid effective medium theory. In particular, we apply the Meier-Wokaun procedure to derive a corrected version of the Maxwell-Garnett formula for the refractive index of a medium composed by metallic rods with subwavelength cross-section. We compare this result with the v… ▽ More This letter discusses the importance of the nature of local fields inside a unit cell of optical metamaterials in develo** a valid effective medium theory. In particular, we apply the Meier-Wokaun procedure to derive a corrected version of the Maxwell-Garnett formula for the refractive index of a medium composed by metallic rods with subwavelength cross-section. We compare this result with the values obtained using the full mode analysis calculated via numerical simulations and analyze the impact of surface plasmon polaritons in adequately determining the effective refractive index of the medium. △ Less

Submitted 18 June, 2013; originally announced June 2013.

Far Infrared Slab Lensing and Subwavelength Imaging in Crystal Quartz

Authors: R. Estevâm da Silva, R. Macêdo, T. Dumelow, J. A. P. da Costa, S. B. Honorato, A. P. Ayala

Abstract: We examine the possibility of using negative refraction stemming from the phonon response in an anisotropic crystal to create a simple slab lens with plane parallel sides, and show that imaging from such a lens should be possible at room temperature despite the effects of absorption that are inevitably present due to phonon dam**. In particular, we consider the case of crystal quartz, a system f… ▽ More We examine the possibility of using negative refraction stemming from the phonon response in an anisotropic crystal to create a simple slab lens with plane parallel sides, and show that imaging from such a lens should be possible at room temperature despite the effects of absorption that are inevitably present due to phonon dam**. In particular, we consider the case of crystal quartz, a system for which experimental measurements consistent with all-angle negative refraction have already been demonstrated. Furthermore, we investigate the possibility of subwavelength imaging from such materials, and show that it should be possible for certain configurations. △ Less

Submitted 19 November, 2012; v1 submitted 15 July, 2012; originally announced July 2012.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. B 86, 155152 (2012)

Macroscopic Electromagnetic Response of Arbitrarily Shaped Spatially Dispersive Bodies formed by Metallic Wires

Authors: João T. Costa, Mário G. Silveirinha

Abstract: In media with strong spatial dispersion the electric displacement vector and the electric field are typically linked by a partial differential equation in the bulk region. The objective of this work is to highlight that in the vicinity of an interface the relation between the macroscopic fields cannot be univocally determined from the bulk response of the involved materials, but requires instead t… ▽ More In media with strong spatial dispersion the electric displacement vector and the electric field are typically linked by a partial differential equation in the bulk region. The objective of this work is to highlight that in the vicinity of an interface the relation between the macroscopic fields cannot be univocally determined from the bulk response of the involved materials, but requires instead the knowledge of internal degrees of freedom of the materials. We derive such relation for the particular case of "wire media", and describe a numerical formalism that enables characterizing the electromagnetic response of arbitrarily shaped spatially dispersive bodies formed by arrays of crossed wires. The possibility of concentrating the electromagnetic field in a narrow spot by tapering a metamaterial waveguide is discussed. △ Less

Submitted 24 July, 2012; v1 submitted 8 May, 2012; originally announced May 2012.

Comments: 34 pages, 10 figures

A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test

Authors: E. Abat, J. M. Abdallah, T. N. Addy, P. Adragna, M. Aharrouche, A. Ahmad, T. P. A. Akesson, M. Aleksa, C. Alexa, K. Anderson, A. Andreazza, F. Anghinolfi, A. Antonaki, G. Arabidze, E. Arik, T. Atkinson, J. Baines, O. K. Baker, D. Banfi, S. Baron, A. J. Barr, R. Beccherle, H. P. Beck, B. Belhorma, P. J. Bell , et al. (460 additional authors not shown)

Abstract: A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in… ▽ More A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale. △ Less

Submitted 12 May, 2011; v1 submitted 20 December, 2010; originally announced December 2010.

Comments: 36 pages, 12 figures, accepted by JINST

Report number: ATL-COM-CAL-2010-006

Journal ref: JINST 6 (2011) P06001

Static and dynamic simulation in the classical two-dimensional anisotropic Heisenberg model

Authors: J. E. R. Costa, B. V. Costa

Abstract: By using a simulated annealing approach, Monte Carlo and molecular-dynamics techniques we have studied static and dynamic behavior of the classical two-dimensional anisotropic Heisenberg model. We have obtained numerically that the vortex developed in such a model exhibit two different behaviors depending if the value of the anisotropy $λ$ lies below or above a critical value $λ_c$ . The in-plane… ▽ More By using a simulated annealing approach, Monte Carlo and molecular-dynamics techniques we have studied static and dynamic behavior of the classical two-dimensional anisotropic Heisenberg model. We have obtained numerically that the vortex developed in such a model exhibit two different behaviors depending if the value of the anisotropy $λ$ lies below or above a critical value $λ_c$ . The in-plane and out-of-plane correlation functions ($S^{xx}$ and $S^{zz}$) were obtained numerically for $λ< λ_c$ and $λ> λ_c$ . We found that the out-of-plane dynamical correlation function exhibits a central peak for $λ> λ_c$ but not for $λ< λ_c$ at temperatures above $T_{BKT}$ . △ Less

Submitted 21 October, 2010; originally announced October 2010.

Comments: 7 pages

Journal ref: Physical Review B54, no.2, 1 JULY 1996

Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam

Authors: A. Ahmad, A. Andreazza, T. Atkinson, J. Baines, A. J. Barr, R. Beccherle, P. J. Bell, J. Bernabeu, Z. Broklova, P. A. Bruckman de Renstrom, D. Cauz, L. Chevalier, S. Chouridou, M. Citterio, A. Clark, M. Cobal, T. Cornelissen, S. Correard, M. J. Costa, D. Costanzo, S. Cuneo, M. Dameri, G. Darbo, J. B. de Vivie, B. Di Girolamo , et al. (104 additional authors not shown)

Abstract: A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated u… ▽ More A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate. △ Less

Submitted 26 May, 2008; originally announced May 2008.

Comments: 22 pages, submitted to JINST, 129 authors

Journal ref: JINST 3:P09004,2008

ATLAS silicon module assembly and qualification tests at IFIC Valencia

Authors: J. Bernabeu, J. V. Civera, M. J. Costa, C. Escobar, J. Fuster, C. Garcia, J. E. Garcia-Navarro, F. Gonzalez, S. Gonzalez-Sevilla, C. Lacasta, G. Llosa, S. Marti-Garcia, M. Minano, V. A. Mitsou, P. Modesto, J. Nacher, R. Rodriguez-Oliete, F. J. Sanchez, L. Sospedra, V. Strachko

Abstract: ATLAS experiment, designed to probe the interactions of particles emerging out of proton proton collisions at energies of up to 14 TeV, will assume operation at the Large Hadron Collider (LHC) at CERN in 2007. This paper discusses the assembly and the quality control tests of forward detector modules for the ATLAS silicon microstrip detector assembled at the Instituto de Fisica Corpuscular (IFIC… ▽ More ATLAS experiment, designed to probe the interactions of particles emerging out of proton proton collisions at energies of up to 14 TeV, will assume operation at the Large Hadron Collider (LHC) at CERN in 2007. This paper discusses the assembly and the quality control tests of forward detector modules for the ATLAS silicon microstrip detector assembled at the Instituto de Fisica Corpuscular (IFIC) in Valencia. The construction and testing procedures are outlined and the laboratory equipment is briefly described. Emphasis is given on the module quality achieved in terms of mechanical and electrical stability. △ Less

Submitted 3 September, 2007; originally announced September 2007.

Comments: 23 pages, 38 EPS figures, uses JINST LaTeX class

Journal ref: JINST 2:T05001,2007