-
High-power and narrow-linewidth laser on thin-film lithium niobate enabled by photonic wire bonding
Authors:
Cornelis A. A. Franken,
Rebecca Cheng,
Keith Powell,
Georgios Kyriazidis,
Victoria Rosborough,
Juergen Musolf,
Maximilian Shah,
David R. Barton III,
Gage Hills,
Leif Johansson,
Klaus-J. Boller,
Marko Lončar
Abstract:
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platfo…
▽ More
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platform, to date, a major bottleneck of the platform is the existence of a tunable, high-power, and narrow-linewidth on-chip laser. Here, we address this problem using photonic wire bonding to integrate optical amplifiers with a thin-film lithium niobate feedback circuit, and demonstrate an extended cavity diode laser yielding high on-chip power of 78 mW, side mode suppression larger than 60 dB and wide wavelength tunability over 43 nm. The laser frequency stability over short timescales shows an ultra-narrow intrinsic linewidth of 550 Hz. Long-term recordings indicate a high passive stability of the photonic wire bonded laser with 58 hours of mode-hop-free operation, with a trend in the frequency drift of only 4.4 MHz/h. This work verifies photonic wire bonding as a viable integration solution for high performance on-chip lasers, opening the path to system level upscaling and Watt-level output powers.
△ Less
Submitted 5 July, 2024; v1 submitted 28 June, 2024;
originally announced July 2024.
-
Formation of motile cell clusters in heterogeneous model tumors: the role of cell-cell alignment
Authors:
Quirine J. S. Braat,
Cornelis Storm,
Liesbeth M. C. Janssen
Abstract:
Circulating tumor cell clusters play an important role in the metastatic cascade. These clusters can acquire a migratory and more invasive phenotype, and coordinate their motion to migrate as a collective. Before such clusters can form by collectively detaching from a primary tumor, however, the cluster must first aggregate in the tumor interior. The mechanism of this cluster formation process is…
▽ More
Circulating tumor cell clusters play an important role in the metastatic cascade. These clusters can acquire a migratory and more invasive phenotype, and coordinate their motion to migrate as a collective. Before such clusters can form by collectively detaching from a primary tumor, however, the cluster must first aggregate in the tumor interior. The mechanism of this cluster formation process is still poorly understood. One of the possible ways for cells to cluster is by aligning their direction of motion with their neighboring cells. This work aims to investigate the role of this cell-cell alignment interaction on the formation of motile cell clusters inside the bulk of a tumor using computer simulations. We employ a Cellular Potts model in which we model a two-dimensional heterogeneous confluent layer containing both motile and non-motile cells. Our results indicate that the degree of clustering is governed by two distinct processes: the formation of clusters due to the presence of cell-cell alignment interactions among motile cells, and the suppression of clustering due to the presence of the dynamic cellular environment (comprised of the non-motile cells). We find that the largest motile clusters are formed for intermediate alignment strengths, contrary to what is observed for motile cells in free space (that is, unimpeded by a dense cellular environment), in which case stronger cell-cell alignment always leads to larger clustering. Our findings suggest that the presence of a densely-packed cellular environment and strong cell-cell alignment inhibits the formation of large migratory clusters within the primary tumor, providing physical insight into potential factors at play during the early stages of metastasis.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Low-cost wind turbine aeroacoustic predictions using actuator lines
Authors:
Laura Botero-Bolivar,
Oscar A Marino,
Cornelis H. Venner,
Leandro D. de Santana,
Esteban Ferrer
Abstract:
Aerodynamic noise is a limitation for further exploitation of wind energy resources. As this type of noise is caused by the interaction of turbulent flow with the airframe, a detailed resolution of the flow is necessary to obtain an accurate prediction of the far-field noise. Computational fluid dynamic (CFD) solvers simulate the flow field but only at a high computational cost, which is much incr…
▽ More
Aerodynamic noise is a limitation for further exploitation of wind energy resources. As this type of noise is caused by the interaction of turbulent flow with the airframe, a detailed resolution of the flow is necessary to obtain an accurate prediction of the far-field noise. Computational fluid dynamic (CFD) solvers simulate the flow field but only at a high computational cost, which is much increased when the acoustic field is resolved. Therefore, wind turbine noise predictions using numerical approaches remain a challenge. This paper presents a methodology that couples (relatively fast) wind turbine CFD simulations using actuator lines with a fast turn-around noise prediction method. The flow field is simulated using actuator lines and large eddy simulations. The noise prediction method is based on the Amiet-Schlinker's theory for rotatory noise sources, considering leading- and trailing-edge noise as unique noise sources. A 2D panel code (XFOIL) calculates the sectional forces and boundary layer quantities. The resulting methodology for the noise prediction method is of high fidelity since the wind turbine geometry is accounted for in both flow and acoustics predictions. Results are compared with field measurements of a full-scale wind turbine for two operational conditions, validating the results of this research.
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
Time-efficient, high-resolution 3T whole-brain relaxometry using Cartesian 3D MR-STAT with CSF suppression
Authors:
Hongyan Liu,
Edwin Versteeg,
Miha Fuderer,
Oscar van der Heide,
Martin B. Schilder,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Purpose: Current 3D Magnetic Resonance Spin TomogrAphy in Time-domain (MR-STAT) protocols use transient-state, gradient-spoiled gradient-echo sequences that are prone to cerebrospinal fluid (CSF) pulsation artifacts when applied to the brain. This study aims at develo** a 3D MR-STAT protocol for whole-brain relaxometry that overcomes the challenges posed by CSF-induced ghosting artifacts. Method…
▽ More
Purpose: Current 3D Magnetic Resonance Spin TomogrAphy in Time-domain (MR-STAT) protocols use transient-state, gradient-spoiled gradient-echo sequences that are prone to cerebrospinal fluid (CSF) pulsation artifacts when applied to the brain. This study aims at develo** a 3D MR-STAT protocol for whole-brain relaxometry that overcomes the challenges posed by CSF-induced ghosting artifacts. Method: We optimized the flip-angle train within the Cartesian 3D MR-STAT framework to achieve two objectives: (1) minimization of the noise level in the reconstructed quantitative maps, and (2) reduction of the CSF-to-white-matter signal ratio to suppress CSF signal and the associated pulsation artifacts. The optimized new sequence was tested on a gel/water-phantom to evaluate the accuracy of the quantitative maps, and on healthy volunteers to explore the effectiveness of the CSF artifact suppression and robustness of the new protocol. Results: A new optimized sequence with both high parameter encoding capability and low CSF intensity was proposed and initially validated in the gel/water-phantom experiment. From in-vivo experiments with five volunteers, the proposed CSF-suppressed sequence shows no CSF ghosting artifacts and overall greatly improved image quality for all quantitative maps compared to the baseline sequence. Statistical analysis indicated low inter-subject and inter-scan variability for quantitative parameters in gray matter and white matter (1.6%-2.4% for T1 and 2.0%-4.6% for T2), demonstrating the robustness of the new sequence. Conclusion: We presented a new 3D MR-STAT sequence with CSF suppression that effectively eliminates CSF pulsation artifacts. The new sequence ensures consistently high-quality, 1mm^3 whole-brain relaxometry within a rapid 5.5-minute scan time.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Pedophysics: an open-source python package for soil geophysics
Authors:
Gaston Mendoza Veirana,
Philippe De Smedt,
Jeroen Verhegge,
Wim Cornelis
Abstract:
This study introduces Pedophysics, an open-source Python package designed to facilitate solutions for users who work in the field of soil assessment using near-surface geophysical electromagnetic techniques. At the core of this software is the ability to translate geophysical data into specific soil properties (and vice-versa) using pedophysical models (PM). Pedophysical modelling techniques offer…
▽ More
This study introduces Pedophysics, an open-source Python package designed to facilitate solutions for users who work in the field of soil assessment using near-surface geophysical electromagnetic techniques. At the core of this software is the ability to translate geophysical data into specific soil properties (and vice-versa) using pedophysical models (PM). Pedophysical modelling techniques offer valuable insights into various realms including precision agriculture, soil health, resource prospecting, nutrient and land management, hydrogeology, and heritage conservation. In develo** a tool for pedophysical modelling, some challenges emerged: selecting suitable PMs from the extensive literature, adapting these to specific conditions, and ensuring adequate data availability. While addressing these, we designed an automated workflow that implements robust PMs (selected after a throughout review), apply different modelling approaches based on soil characteristics and targeted properties, and employs pedotransfer functions and assumptions to integrate missing soil data into PMs. The capabilities of Pedophysics extend to handling complex scenarios such as fusing data from different instruments, incorporating continuous monitoring measurements, and soil calibration data. With these solutions, Pedophysics automates the process of deriving targeted soil and geophysical properties with state-of-art accuracy. Hereby, users can rely on Pedophysics to implement specific knowledge about pedophysical modeling. The software promotes global access to advanced soil geophysical solutions by being open-source and encouraging community contributions. Pedophysics is written in pure Python and has minimal dependencies. It can be easily installed from the Python Package Index (PyPI).
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
A High-Frequency Flexible Ultrasonic Cuff Implant for High-Precision Vagus Nerve Ultrasound Neuromodulation
Authors:
Cornelis van Damme,
Gandhika K. Wardhana,
Andrada Iulia Velea,
Vasiliki Giagka,
Tiago L. Costa
Abstract:
In the emerging research field of bioelectronic medicine, it has been indicated that neuromodulation of the Vagus Nerve (VN) has the potential to treat various conditions such as epilepsy, depression, and autoimmune diseases. In order to reduce side effects, as well as to increase the effectiveness of the delivered therapy, subfascicle stimulation specificity is required. In the electrical domain,…
▽ More
In the emerging research field of bioelectronic medicine, it has been indicated that neuromodulation of the Vagus Nerve (VN) has the potential to treat various conditions such as epilepsy, depression, and autoimmune diseases. In order to reduce side effects, as well as to increase the effectiveness of the delivered therapy, subfascicle stimulation specificity is required. In the electrical domain, increasing spatial selectivity can only be achieved using invasive and potentially damaging approaches like compressive forces or nerve penetration. To avoid these invasive methods, while obtaining a high spatial selectivity, a 2 mm diameter extraneural cuff-shaped proof-of-concept design with integrated Lead Zirconate Titanate (PZT) based ultrasound (US) transducers is proposed in this paper. For the development of the proposed concept, wafer-level microfabrication techniques are employed. Moreover, acoustic measurements are performed on the device, in order to characterize the ultrasonic beam profiles of the integrated PZT-based US transducers. A focal spot size of around 200 μm by 200 μm is measured for the proposed cuff. Moreover, the curvature of the device leads to constructive interference of the US waves originating from multiple PZT-based US transducers, which in turn leads to an increase of 45% in focal pressure compared to the focal pressure of a single PZT-based US transducer. Integrating PZT-based US transducers in an extraneural cuff-shaped design has the potential to achieve high-precision US neuromodulation of the Vagus Nerve without requiring intraneural implantation.
△ Less
Submitted 27 October, 2023;
originally announced November 2023.
-
Energy-stable discretization of the one-dimensional two-fluid model
Authors:
J. F. H. Buist,
B. Sanderse,
S. Dubinkina,
C. W. Oosterlee,
R. A. W. M. Henkes
Abstract:
In this paper we present a complete framework for the energy-stable simulation of stratified incompressible flow in channels, using the one-dimensional two-fluid model. Building on earlier energy-conserving work on the basic two-fluid model, our new framework includes diffusion, friction, and surface tension. We show that surface tension can be added in an energy-conserving manner, and that diffus…
▽ More
In this paper we present a complete framework for the energy-stable simulation of stratified incompressible flow in channels, using the one-dimensional two-fluid model. Building on earlier energy-conserving work on the basic two-fluid model, our new framework includes diffusion, friction, and surface tension. We show that surface tension can be added in an energy-conserving manner, and that diffusion and friction have a strictly dissipative effect on the energy.
We then propose spatial discretizations for these terms such that a semi-discrete model is obtained that has the same conservation properties as the continuous model. Additionally, we propose a new energy-stable advective flux scheme that is energy-conserving in smooth regions of the flow and strictly dissipative where sharp gradients appear. This is obtained by combining, using flux limiters, a previously developed energy-conserving advective flux with a novel first-order upwind scheme that is shown to be strictly dissipative.
The complete framework, with diffusion, surface tension, and a bounded energy, is linearly stable to short wavelength perturbations, and exhibits nonlinear dam** near shocks. The model yields smoothly converging numerical solutions, even under conditions for which the basic two-fluid model is ill-posed. With our explicit expressions for the dissipation rates, we are able to attribute the nonlinear dam** to the different dissipation mechanisms, and compare their effects.
△ Less
Submitted 21 October, 2023;
originally announced October 2023.
-
arXiv:2310.11362
[pdf]
physics.optics
physics.app-ph
physics.bio-ph
physics.chem-ph
physics.med-ph
Ultrafast pulse duration measurement method of near-infrared pulses for a broad range of wavelengths using two-photon absorption in a liquid and fluorescent dye solution
Authors:
Rafeeq Syed,
Cornelis J. G. J. Uiterwaal
Abstract:
A novel characterization method to measure the pulse duration of ultrafast near-IR pulses is introduced, which uses simple tabletop optics, is relatively inexpensive, and is expected to work in a broad wavelength range. Our diagnostic tool quantitatively characterizes the laser pulse duration of any near-IR wavelength assuming a Gaussian pulse shape with a linear chirp. We negatively prechirp near…
▽ More
A novel characterization method to measure the pulse duration of ultrafast near-IR pulses is introduced, which uses simple tabletop optics, is relatively inexpensive, and is expected to work in a broad wavelength range. Our diagnostic tool quantitatively characterizes the laser pulse duration of any near-IR wavelength assuming a Gaussian pulse shape with a linear chirp. We negatively prechirp near-IR pulses with a home-built broadband pulse compressor (BPC) and send this prechirped beam through a cell filled with a low-molar solution of a fluorescent dye in a liquid. After two-photon absorption, this dye fluoresces in the visible, and we record this visible signal as a function of the propagation distance in the liquid cell. We calibrate the group velocity dispersion (GVD) of our home-built BPC device against the known GVD of the compressor of our 800 nm laser and confirm this value using geometric considerations. Now knowing the GVD of BPC and the recorded visible signal for various amounts of negative chirp, let us extract the smallest pulse duration of the near-IR pulse from this visible signal. As a useful corollary, our analysis also enables the direct measurement of the GVD for liquids and the indirect measurement of the absorption coefficient for liquids in the near-IR range, in contrast to indirect GVD measurements that rely on methods such as the double derivative of the refractive index.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Time-Resolved Reconstruction of Motion, Force, and Stiffness using Spectro-Dynamic MRI
Authors:
Max H. C. van Riel,
Tristan van Leeuwen,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Measuring the dynamics and mechanical properties of muscles and joints is important to understand the (patho)physiology of muscles. However, acquiring dynamic time-resolved MRI data is challenging. We have previously developed Spectro-Dynamic MRI which allows the characterization of dynamical systems at a high spatial and temporal resolution directly from k-space data. This work presents an extend…
▽ More
Measuring the dynamics and mechanical properties of muscles and joints is important to understand the (patho)physiology of muscles. However, acquiring dynamic time-resolved MRI data is challenging. We have previously developed Spectro-Dynamic MRI which allows the characterization of dynamical systems at a high spatial and temporal resolution directly from k-space data. This work presents an extended Spectro-Dynamic MRI framework that reconstructs 1) time-resolved MR images, 2) time-resolved motion fields, 3) dynamical parameters, and 4) an activation force, at a temporal resolution of 11 ms. An iterative algorithm solves a minimization problem containing four terms: a motion model relating the motion to the fully-sampled k-space data, a dynamical model describing the expected type of dynamics, a data consistency term describing the undersampling pattern, and finally a regularization term for the activation force. We acquired MRI data using a dynamic motion phantom programmed to move like an actively driven linear elastic system, from which all dynamic variables could be accurately reconstructed, regardless of the sampling pattern. The proposed method performed better than a two-step approach, where time-resolved images were first reconstructed from the undersampled data without any information about the motion, followed by a motion estimation step.
△ Less
Submitted 11 October, 2023;
originally announced October 2023.
-
Real-time myocardial landmark tracking for MRI-guided cardiac radio-ablation using Gaussian Processes
Authors:
Niek R. F. Huttinga,
Osman Akdag,
Martin F. Fast,
Joost Verhoeff,
Firdaus A. A. Mohamed Hoesein,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi,
Stefano Mandija
Abstract:
The high speed of cardiorespiratory motion introduces a unique challenge for cardiac stereotactic radio-ablation (STAR) treatments with the MR-linac. Such treatments require tracking myocardial landmarks with a maximum latency of 100 ms, which includes the acquisition of the required data. The aim of this study is to present a new method that allows to track myocardial landmarks from few readouts…
▽ More
The high speed of cardiorespiratory motion introduces a unique challenge for cardiac stereotactic radio-ablation (STAR) treatments with the MR-linac. Such treatments require tracking myocardial landmarks with a maximum latency of 100 ms, which includes the acquisition of the required data. The aim of this study is to present a new method that allows to track myocardial landmarks from few readouts of MRI data, thereby achieving a latency sufficient for STAR treatments. We present a tracking framework that requires only few readouts of k-space data as input, which can be acquired at least an order of magnitude faster than MR-images. Combined with the real-time tracking speed of a probabilistic machine learning framework called Gaussian Processes, this allows to track myocardial landmarks with a sufficiently low latency for cardiac STAR guidance, including both the acquisition of required data, and the tracking inference. The framework is demonstrated in 2D on a motion phantom, and in vivo on volunteers and a ventricular tachycardia (arrhythmia) patient. Moreover, the feasibility of an extension to 3D was demonstrated by in silico 3D experiments with a digital motion phantom. The framework was compared with template matching - a reference, image-based, method - and linear regression methods. Results indicate an order of magnitude lower total latency (<10 ms) for the proposed framework in comparison with alternative methods. The root-mean-square-distances and mean end-point-distance with the reference tracking method was less than 0.8 mm for all experiments, showing excellent (sub-voxel) agreement. The high accuracy in combination with a total latency of less than 10 ms - including data acquisition and processing - make the proposed method a suitable candidate for tracking during STAR treatments.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
A three-dimensional MR-STAT protocol for high-resolution multi-parametric quantitative MRI
Authors:
Hongyan Liu,
Oscar van der Heide,
Edwin Versteeg,
Martijn Froeling,
Miha Fuderer,
Fei Xu,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Magnetic Resonance Spin Tomography in Time-Domain (MR-STAT) is a multiparametric quantitative MR framework, which allows for simultaneously acquiring quantitative tissue parameters such as T1, T2 and proton density from one single short scan. A typical 2D MR-STAT acquisition uses a gradient-spoiled, gradient-echo sequence with a slowly varying RF flip-angle train and Cartesian readouts, and the qu…
▽ More
Magnetic Resonance Spin Tomography in Time-Domain (MR-STAT) is a multiparametric quantitative MR framework, which allows for simultaneously acquiring quantitative tissue parameters such as T1, T2 and proton density from one single short scan. A typical 2D MR-STAT acquisition uses a gradient-spoiled, gradient-echo sequence with a slowly varying RF flip-angle train and Cartesian readouts, and the quantitative tissue maps are reconstructed by an iterative, model-based optimization algorithm. In this work, we design a 3D MR-STAT framework based on previous 2D work, in order to achieve better image SNR, higher though-plan resolution and better tissue characterization. Specifically, we design a 7-minute, high-resolution 3D MR-STAT sequence, and the corresponding two-step reconstruction algorithm for the large-scale dataset. To reduce the long acquisition time, Cartesian undersampling strategies such as SENSE are adopted in our transient-state quantitative framework. To reduce the computational burden, a data splitting scheme is designed for decoupling the 3D reconstruction problem into independent 2D reconstructions. The proposed 3D framework is validated by numerical simulations, phantom experiments and in-vivo experiments. High-quality knee quantitative maps with 0.8 x 0.8 x 1.5mm3 resolution and bilateral lower leg maps with 1.6mm isotropic resolution can be acquired using the proposed 7-minute acquisition sequence and the 3-minute-per-slice decoupled reconstruction algorithm. The proposed 3D MR-STAT framework could have wide clinical applications in the future.
△ Less
Submitted 22 May, 2023;
originally announced May 2023.
-
Generalizable synthetic MRI with physics-informed convolutional networks
Authors:
Luuk Jacobs,
Stefano Mandija,
Hongyan Liu,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi,
Matteo Maspero
Abstract:
In this study, we develop a physics-informed deep learning-based method to synthesize multiple brain magnetic resonance imaging (MRI) contrasts from a single five-minute acquisition and investigate its ability to generalize to arbitrary contrasts to accelerate neuroimaging protocols. A dataset of fifty-five subjects acquired with a standard MRI protocol and a five-minute transient-state sequence w…
▽ More
In this study, we develop a physics-informed deep learning-based method to synthesize multiple brain magnetic resonance imaging (MRI) contrasts from a single five-minute acquisition and investigate its ability to generalize to arbitrary contrasts to accelerate neuroimaging protocols. A dataset of fifty-five subjects acquired with a standard MRI protocol and a five-minute transient-state sequence was used to develop a physics-informed deep learning-based method. The model, based on a generative adversarial network, maps data acquired from the five-minute scan to "effective" quantitative parameter maps, here named q*-maps, by using its generated PD, T1, and T2 values in a signal model to synthesize four standard contrasts (proton density-weighted, T1-weighted, T2-weighted, and T2-weighted fluid-attenuated inversion recovery), from which losses are computed. The q*-maps are compared to literature values and the synthetic contrasts are compared to an end-to-end deep learning-based method proposed by literature. The generalizability of the proposed method is investigated for five volunteers by synthesizing three non-standard contrasts unseen during training and comparing these to respective ground truth acquisitions via contrast-to-noise ratio and quantitative assessment. The physics-informed method was able to match the high-quality synthMRI of the end-to-end method for the four standard contrasts, with mean \pm standard deviation structural similarity metrics above 0.75 \pm 0.08 and peak signal-to-noise ratios above 22.4 \pm 1.9 and 22.6 \pm 2.1. Additionally, the physics-informed method provided retrospective contrast adjustment, with visually similar signal contrast and comparable contrast-to-noise ratios to the ground truth acquisitions for three sequences unused for model training, demonstrating its generalizability and potential application to accelerate neuroimaging protocols.
△ Less
Submitted 21 May, 2023;
originally announced May 2023.
-
Transdimensional surface wave tomography of the near-surface: Application to DAS data
Authors:
Amin Rahimi Dalkhani,
Mus'ab Al Hasani,
Guy Drijkoningen,
Cornelis Weemstra
Abstract:
Distributed Acoustic Sensing (DAS) is a novel technology that allows sampling of the seismic wavefield densely over a broad frequency band. This makes it an ideal tool for surface wave studies.
In this study, we evaluate the potential of DAS to image the near-surface using synthetic data and active-source field DAS data recorded with straight fibers in Groningen, the Netherlands. First, we recov…
▽ More
Distributed Acoustic Sensing (DAS) is a novel technology that allows sampling of the seismic wavefield densely over a broad frequency band. This makes it an ideal tool for surface wave studies.
In this study, we evaluate the potential of DAS to image the near-surface using synthetic data and active-source field DAS data recorded with straight fibers in Groningen, the Netherlands. First, we recover the laterally varying surface wave phase velocities (i.e., local dispersion curves) from the fundamental-mode surface waves. We utilize the Multi Offset Phase Analysis (MOPA) for the recovery of the laterally varying phase velocities. In this way, we take into account the lateral variability of the subsurface structures.
Then, instead of inverting each local dispersion curve independently, we propose to use a novel 2D transdimensional surface wave tomography algorithm to image the subsurface. In this approach, we parameterize the model space using 2D Voronoi cells and invert all the local dispersion curves simultaneously to consider the lateral spatial correlation of the inversion result. Additionally, this approach reduces the solution nonuniqueness of the inversion problem.
The proposed methodology successfully recovered the shear-wave velocity of the synthetic data. Application to the field data also confirms the reliability of the proposed algorithm. The recovered 2D shear-wave velocity profile is compared to shear-wave velocity logs obtained at the location of two boreholes, which shows a good agreement.
△ Less
Submitted 20 April, 2023;
originally announced April 2023.
-
SynthRAD2023 Grand Challenge dataset: generating synthetic CT for radiotherapy
Authors:
Adrian Thummerer,
Erik van der Bijl,
Arthur Jr Galapon,
Joost JC Verhoeff,
Johannes A Langendijk,
Stefan Both,
Cornelis,
AT van den Berg,
Matteo Maspero
Abstract:
Purpose: Medical imaging has become increasingly important in diagnosing and treating oncological patients, particularly in radiotherapy. Recent advances in synthetic computed tomography (sCT) generation have increased interest in public challenges to provide data and evaluation metrics for comparing different approaches openly. This paper describes a dataset of brain and pelvis computed tomograph…
▽ More
Purpose: Medical imaging has become increasingly important in diagnosing and treating oncological patients, particularly in radiotherapy. Recent advances in synthetic computed tomography (sCT) generation have increased interest in public challenges to provide data and evaluation metrics for comparing different approaches openly. This paper describes a dataset of brain and pelvis computed tomography (CT) images with rigidly registered CBCT and MRI images to facilitate the development and evaluation of sCT generation for radiotherapy planning.
Acquisition and validation methods: The dataset consists of CT, CBCT, and MRI of 540 brains and 540 pelvic radiotherapy patients from three Dutch university medical centers. Subjects' ages ranged from 3 to 93 years, with a mean age of 60. Various scanner models and acquisition settings were used across patients from the three data-providing centers. Details are available in CSV files provided with the datasets.
Data format and usage notes: The data is available on Zenodo (https://doi.org/10.5281/zenodo.7260705) under the SynthRAD2023 collection. The images for each subject are available in nifti format.
Potential applications: This dataset will enable the evaluation and development of image synthesis algorithms for radiotherapy purposes on a realistic multi-center dataset with varying acquisition protocols. Synthetic CT generation has numerous applications in radiation therapy, including diagnosis, treatment planning, treatment monitoring, and surgical planning.
△ Less
Submitted 28 March, 2023;
originally announced March 2023.
-
A Transfer Matrix for the Input Impedance of weakly tapered Cones as of Wind Instruments
Authors:
Timo Grothe,
Johannes Baumgart,
Cornelis J. Nederveen
Abstract:
A formula for the local acoustical admittance in a conical waveguide with viscous and thermal losses given by Nederveen [(1969) Acoustical Aspects of Woodwind Instruments (Frits Knuf, Amsterdam)] is rewritten as an impedance transmission matrix. Based on a self-consistent approximation for the cone, it differs from other one-dimensional transmission matrices used in musical acoustics, which implic…
▽ More
A formula for the local acoustical admittance in a conical waveguide with viscous and thermal losses given by Nederveen [(1969) Acoustical Aspects of Woodwind Instruments (Frits Knuf, Amsterdam)] is rewritten as an impedance transmission matrix. Based on a self-consistent approximation for the cone, it differs from other one-dimensional transmission matrices used in musical acoustics, which implicitly include the loss model of a cylinder. The resonance frequencies of air columns calculated with this transmission matrix are in better agreement with more comprehensive models. Even for long cones with a slight taper, there is no need to discretize along the axis.
△ Less
Submitted 6 September, 2023; v1 submitted 22 March, 2023;
originally announced March 2023.
-
Exploring contrast generalisation in deep learning-based brain MRI-to-CT synthesis
Authors:
Lotte Nijskens,
Cornelis,
AT van den Berg,
Joost JC Verhoeff,
Matteo Maspero
Abstract:
Background: Synthetic computed tomography (sCT) has been proposed and increasingly clinically adopted to enable magnetic resonance imaging (MRI)-based radiotherapy. Deep learning (DL) has recently demonstrated the ability to generate accurate sCT from fixed MRI acquisitions. However, MRI protocols may change over time or differ between centres resulting in low-quality sCT due to poor model general…
▽ More
Background: Synthetic computed tomography (sCT) has been proposed and increasingly clinically adopted to enable magnetic resonance imaging (MRI)-based radiotherapy. Deep learning (DL) has recently demonstrated the ability to generate accurate sCT from fixed MRI acquisitions. However, MRI protocols may change over time or differ between centres resulting in low-quality sCT due to poor model generalisation. Purpose: investigating domain randomisation (DR) to increase the generalisation of a DL model for brain sCT generation. Methods: CT and corresponding T1-weighted MRI with/without contrast, T2-weighted, and FLAIR MRI from 95 patients undergoing RT were collected, considering FLAIR the unseen sequence where to investigate generalisation. A ``Baseline'' generative adversarial network was trained with/without the FLAIR sequence to test how a model performs without DR. Image similarity and accuracy of sCT-based dose plans were assessed against CT to select the best-performing DR approach against the Baseline. Results: The Baseline model had the poorest performance on FLAIR, with mean absolute error (MAE)=106$\pm$20.7 HU (mean$\pmσ$). Performance on FLAIR significantly improved for the DR model with MAE=99.0$\pm$14.9 HU, but still inferior to the performance of the Baseline+FLAIR model (MAE=72.6$\pm$10.1 HU). Similarly, an improvement in $γ$-pass rate was obtained for DR vs Baseline. Conclusions: DR improved image similarity and dose accuracy on the unseen sequence compared to training only on acquired MRI. DR makes the model more robust, reducing the need for re-training when applying a model on sequences unseen and unavailable for retraining.
△ Less
Submitted 17 March, 2023;
originally announced March 2023.
-
Ab initio electron-lattice downfolding: potential energy landscapes, anharmonicity, and molecular dynamics in charge density wave materials
Authors:
Arne Schobert,
Jan Berges,
Erik G. C. P. van Loon,
Michael A. Sentef,
Sergey Brener,
Mariana Rossi,
Tim O. Wehling
Abstract:
The interplay of electronic and nuclear degrees of freedom presents an outstanding problem in condensed matter physics and chemistry. Computational challenges arise especially for large systems, long time scales, in nonequilibrium, or in systems with strong correlations. In this work, we show how downfolding approaches facilitate complexity reduction on the electronic side and thereby boost the si…
▽ More
The interplay of electronic and nuclear degrees of freedom presents an outstanding problem in condensed matter physics and chemistry. Computational challenges arise especially for large systems, long time scales, in nonequilibrium, or in systems with strong correlations. In this work, we show how downfolding approaches facilitate complexity reduction on the electronic side and thereby boost the simulation of electronic properties and nuclear motion - in particular molecular dynamics (MD) simulations. Three different downfolding strategies based on constraining, unscreening, and combinations thereof are benchmarked against full density functional calculations for selected charge density wave (CDW) systems, namely 1H-TaS$_2$, 1T-TiSe$_2$, 1H-NbS$_2$, and a one-dimensional carbon chain. We find that the downfolded models can reproduce potential energy surfaces on supercells accurately and facilitate computational speedup in MD simulations by about five orders of magnitude in comparison to purely ab initio calculations. For monolayer 1H-TaS$_2$ we report classical replica exchange and quantum path integral MD simulations, revealing the impact of thermal and quantum fluctuations on the CDW transition.
△ Less
Submitted 16 January, 2024; v1 submitted 13 March, 2023;
originally announced March 2023.
-
Hybrid integrated near UV lasers using the deep-UV Al2O3 platform
Authors:
C. A. A. Franken,
W. A. P. M. Hendriks,
L. V. Winkler,
M. Dijkstra,
A. R. do Nascimento Jr,
A. van Rees,
M. R. S. Mardani,
R. Dekker,
J. van Kerkhof,
P. J. M. van der Slot,
S. M. García-Blanco,
K. -J. Boller
Abstract:
Hybrid integrated diode lasers have so far been realized using silicon, polymer, and silicon nitride (Si3N4) waveguide platforms for extending on-chip tunable light engines from the infrared throughout the visible range. Here we demonstrate the first hybrid integrated laser using the aluminum oxide (Al2O3) deep-UV capable waveguide platform. By permanently coupling low-loss Al2O3 frequency-tunable…
▽ More
Hybrid integrated diode lasers have so far been realized using silicon, polymer, and silicon nitride (Si3N4) waveguide platforms for extending on-chip tunable light engines from the infrared throughout the visible range. Here we demonstrate the first hybrid integrated laser using the aluminum oxide (Al2O3) deep-UV capable waveguide platform. By permanently coupling low-loss Al2O3 frequency-tunable Vernier feedback circuits with GaN double-pass amplifiers in a hermetically sealed housing, we demonstrate the first extended cavity diode laser (ECDL) in the near UV. The laser shows a maximum fiber-coupled output power of 0.74 mW, corresponding to about 3.5 mW on chip, and tunes more than 4.4 nm in wavelength from 408.1 nm to 403.7 nm. Integrating stable, single-mode and tunable lasers into a deep-UV platform opens a new path for chip-integrated photonic applications.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Simulation of CO2 Storage using a Parameterization Method for Essential Trap** Physics: FluidFlower Benchmark Study
Authors:
Yuhang Wang,
Ziliang Zhang,
Cornelis Vuik,
Hadi Hajibeygi
Abstract:
An efficient compositional framework is developed for simulation of CO2 storage in saline aquifers during a full-cycle injection, migration and post-migration processes. Essential trap** mechanisms, including structural, dissolution, and residual trap**, which operate at different time scales are accurately captured in the presented unified framework. In particular, a parameterization method i…
▽ More
An efficient compositional framework is developed for simulation of CO2 storage in saline aquifers during a full-cycle injection, migration and post-migration processes. Essential trap** mechanisms, including structural, dissolution, and residual trap**, which operate at different time scales are accurately captured in the presented unified framework. In particular, a parameterization method is proposed to efficiently describe the relevant physical processes. The proposed framework is validated by comparing the dynamics of gravity-induced convective transport with that reported in the literature. Results show good agreement for both the characteristics of descending fingers and the associated dissolution rate. The developed simulator is then applied to study the FluidFlower benchmark model. An experimental setup with heterogeneous geological layers is discretized into a two-dimensional computational domain where numerical simulation is performed. Impacts of hysteresis and the diffusion of CO2 in liquid phase on the migration and trap** of CO2 plume are investigated. Inclusion of the hysteresis effect does not affect plume migration in this benchmark model, whereas diffusion plays an important role in promoting convective mixing. This work casts a promising approach to predict the migration of the CO2 plume, and to assess the amount of trap** from different mechanisms for long-term CO2 storage.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Accelerated respiratory-resolved 4D-MRI with separable spatio-temporal neural networks
Authors:
Maarten Terpstra,
Matteo Maspero,
Joost Verhoeff,
Cornelis van den Berg
Abstract:
Background: Respiratory-resolved four-dimensional magnetic resonance imaging (4D-MRI) provides essential motion information for accurate radiation treatments of mobile tumors. However, obtaining high-quality 4D-MRI suffers from long acquisition and reconstruction times.
Purpose: To develop a deep learning architecture to quickly acquire and reconstruct high-quality 4D-MRI, enabling accurate moti…
▽ More
Background: Respiratory-resolved four-dimensional magnetic resonance imaging (4D-MRI) provides essential motion information for accurate radiation treatments of mobile tumors. However, obtaining high-quality 4D-MRI suffers from long acquisition and reconstruction times.
Purpose: To develop a deep learning architecture to quickly acquire and reconstruct high-quality 4D-MRI, enabling accurate motion quantification for MRI-guided radiotherapy.
Methods: A small convolutional neural network called MODEST is proposed to reconstruct 4D-MRI by performing a spatial and temporal decomposition, omitting the need for 4D convolutions to use all the spatio-temporal information present in 4D-MRI. This network is trained on undersampled 4D-MRI after respiratory binning to reconstruct high-quality 4D-MRI obtained by compressed sensing reconstruction. The network is trained, validated, and tested on 4D-MRI of 28 lung cancer patients acquired with a T1-weighted golden-angle radial stack-of-stars sequence. The 4D-MRI of 18, 5, and 5 patients were used for training, validation, and testing. Network performances are evaluated on image quality measured by the structural similarity index (SSIM) and motion consistency by comparing the position of the lung-liver interface on undersampled 4D-MRI before and after respiratory binning. The network is compared to conventional architectures such as a U-Net, which has 30 times more trainable parameters.
Results: MODEST can reconstruct high-quality 4D-MRI with higher image quality than a U-Net, despite a thirty-fold reduction in trainable parameters. High-quality 4D-MRI can be obtained using MODEST in approximately 2.5 minutes, including acquisition, processing, and reconstruction.
Conclusion: High-quality accelerated 4D-MRI can be obtained using MODEST, which is particularly interesting for MRI-guided radiotherapy.
△ Less
Submitted 3 August, 2023; v1 submitted 10 November, 2022;
originally announced November 2022.
-
Collective super- and subradiant dynamics between distant optical quantum emitters
Authors:
Alexey Tiranov,
Vasiliki Angelopoulou,
Cornelis Jacobus van Diepen,
Björn Schrinski,
Oliver August Dall'Alba Sandberg,
Ying Wang,
Leonardo Midolo,
Sven Scholz,
Andreas Dirk Wieck,
Arne Ludwig,
Anders Søndberg Sørensen,
Peter Lodahl
Abstract:
Photon emission is the hallmark of light-matter interaction and the foundation of photonic quantum science, enabling advanced sources for quantum communication and computing. Although single-emitter radiation can be tailored by the photonic environment, the introduction of multiple emitters extends this picture. A fundamental challenge, however, is that the radiative dipole-dipole coupling rapidly…
▽ More
Photon emission is the hallmark of light-matter interaction and the foundation of photonic quantum science, enabling advanced sources for quantum communication and computing. Although single-emitter radiation can be tailored by the photonic environment, the introduction of multiple emitters extends this picture. A fundamental challenge, however, is that the radiative dipole-dipole coupling rapidly decays with spatial separation, typically within a fraction of the optical wavelength. We realize distant dipole-dipole radiative coupling with pairs of solid-state optical quantum emitters embedded in a nanophotonic waveguide. We dynamically probe the collective response and identify both super- and subradiant emission as well as means to control the dynamics by proper excitation techniques. Our work constitutes a foundational step toward multiemitter applications for scalable quantum-information processing.
△ Less
Submitted 29 January, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Observation of low-field Feshbach resonances between $^{161}$Dy and $^{40}$K
Authors:
Zhu-Xiong Ye,
Alberto Canali,
Elisa Soave,
Marian Kreyer,
Yaakov Yudkin,
Cornelis Ravensbergen,
Emil Kirilov,
Rudolf Grimm
Abstract:
We report on the observation of Feshbach resonances at low magnetic field strength (below 10 G) in the Fermi-Fermi mixture of $^{161}$Dy and $^{40}$K. We characterize five resonances by measurements of interspecies thermalization rates and molecular binding energies. As a case of particular interest for applications, we consider a resonance near 7.29 G, which combines accurate magnetic tunability…
▽ More
We report on the observation of Feshbach resonances at low magnetic field strength (below 10 G) in the Fermi-Fermi mixture of $^{161}$Dy and $^{40}$K. We characterize five resonances by measurements of interspecies thermalization rates and molecular binding energies. As a case of particular interest for applications, we consider a resonance near 7.29 G, which combines accurate magnetic tunability and access to the universal regime of interactions with experimental simplicity. We show that lifetimes of a few 100 ms can be achieved for the optically trapped, resonantly interacting mixture. We also demonstrate the hydrodynamic expansion of the mixture in the strongly interacting regime and the formation of DyK Feshbach molecules. Our work opens up new experimental possibilities in view of mass-imbalanced superfluids and related phenomena.
△ Less
Submitted 17 October, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
Acceleration Strategies for MR-STAT: Achieving High-Resolution Reconstructions on a Desktop PC within 3 minutes
Authors:
Hongyan Liu,
Oscar van der Heide,
Stefano Mandija,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
MR-STAT is an emerging quantitative magnetic resonance imaging technique which aims at obtaining multi-parametric tissue parameter maps from single short scans. It describes the relationship between the spatial-domain tissue parameters and the time-domain measured signal by using a comprehensive, volumetric forward model. The MR-STAT reconstruction solves a large-scale nonlinear problem, thus is v…
▽ More
MR-STAT is an emerging quantitative magnetic resonance imaging technique which aims at obtaining multi-parametric tissue parameter maps from single short scans. It describes the relationship between the spatial-domain tissue parameters and the time-domain measured signal by using a comprehensive, volumetric forward model. The MR-STAT reconstruction solves a large-scale nonlinear problem, thus is very computationally challenging. In previous work, MR-STAT reconstruction using Cartesian readout data was accelerated by approximating the Hessian matrix with sparse, banded blocks, and can be done on high performance CPU clusters with tens of minutes. In the current work, we propose an accelerated Cartesian MR-STAT algorithm incorporating two different strategies: firstly, a neural network is trained as a fast surrogate to learn the magnetization signal not only in the full time-domain but also in the compressed lowrank domain; secondly, based on the surrogate model, the Cartesian MR-STAT problem is re-formulated and split into smaller sub-problems by the alternating direction method of multipliers. The proposed method substantially reduces the computational requirements for runtime and memory. Simulated and in-vivo balanced MR-STAT experiments show similar reconstruction results using the proposed algorithm compared to the previous sparse Hessian method, and the reconstruction times are at least 40 times shorter. Incorporating sensitivity encoding and regularization terms is straightforward, and allows for better image quality with a negligible increase in reconstruction time. The proposed algorithm could reconstruct both balanced and gradient-spoiled in-vivo data within 3 minutes on a desktop PC, and could thereby facilitate the translation of MR-STAT in clinical settings.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
Gaussian Processes for real-time 3D motion and uncertainty estimation during MR-guided radiotherapy
Authors:
Niek R. F. Huttinga,
Tom Bruijnen,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Respiratory motion during radiotherapy causes uncertainty in the tumor's location, which is typically addressed by an increased radiation area and a decreased dose. As a result, the treatments' efficacy is reduced. The recently proposed hybrid MR-linac scanner holds the promise to efficiently deal with such respiratory motion through real-time adaptive MR-guided radiotherapy (MRgRT). For MRgRT, mo…
▽ More
Respiratory motion during radiotherapy causes uncertainty in the tumor's location, which is typically addressed by an increased radiation area and a decreased dose. As a result, the treatments' efficacy is reduced. The recently proposed hybrid MR-linac scanner holds the promise to efficiently deal with such respiratory motion through real-time adaptive MR-guided radiotherapy (MRgRT). For MRgRT, motion-fields should be estimated from MR-data and the radiotherapy plan should be adapted in real-time according to the estimated motion-fields. All of this should be performed with a total latency of maximally 200 ms, including data acquisition and reconstruction. A measure of confidence in such estimated motion-fields is highly desirable, for instance to ensure the patient's safety in case of unexpected and undesirable motion. In this work, we propose a framework based on Gaussian Processes to infer 3D motion-fields and uncertainty maps in real-time from only three readouts of MR-data. We demonstrated an inference frame rate up to 69 Hz including data acquisition and reconstruction, thereby exploiting the limited amount of required MR-data. Additionally, we designed a rejection criterion based on the motion-field uncertainty maps to demonstrate the framework's potential for quality assurance. The framework was validated in silico and in vivo on healthy volunteer data (n=5) acquired using an MR-linac, thereby taking into account different breathing patterns and controlled bulk motion. Results indicate end-point-errors with a 75th percentile below 1mm in silico, and a correct detection of erroneous motion estimates with the rejection criterion. Altogether, the results show the potential of the framework for application in real-time MR-guided radiotherapy with an MR-linac.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Cold Atoms in Space: Community Workshop Summary and Proposed Road-Map
Authors:
Ivan Alonso,
Cristiano Alpigiani,
Brett Altschul,
Henrique Araujo,
Gianluigi Arduini,
Jan Arlt,
Leonardo Badurina,
Antun Balaz,
Satvika Bandarupally,
Barry C Barish Michele Barone,
Michele Barsanti,
Steven Bass,
Angelo Bassi,
Baptiste Battelier,
Charles F. A. Baynham,
Quentin Beaufils,
Aleksandar Belic,
Joel Berge,
Jose Bernabeu,
Andrea Bertoldi,
Robert Bingham,
Sebastien Bize,
Diego Blas,
Kai Bongs,
Philippe Bouyer
, et al. (224 additional authors not shown)
Abstract:
We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, a…
▽ More
We summarize the discussions at a virtual Community Workshop on Cold Atoms in Space concerning the status of cold atom technologies, the prospective scientific and societal opportunities offered by their deployment in space, and the developments needed before cold atoms could be operated in space. The cold atom technologies discussed include atomic clocks, quantum gravimeters and accelerometers, and atom interferometers. Prospective applications include metrology, geodesy and measurement of terrestrial mass change due to, e.g., climate change, and fundamental science experiments such as tests of the equivalence principle, searches for dark matter, measurements of gravitational waves and tests of quantum mechanics. We review the current status of cold atom technologies and outline the requirements for their space qualification, including the development paths and the corresponding technical milestones, and identifying possible pathfinder missions to pave the way for missions to exploit the full potential of cold atoms in space. Finally, we present a first draft of a possible road-map for achieving these goals, that we propose for discussion by the interested cold atom, Earth Observation, fundamental physics and other prospective scientific user communities, together with ESA and national space and research funding agencies.
△ Less
Submitted 19 January, 2022;
originally announced January 2022.
-
On Large Ground Station Antennas as Potential Radar Targets for Biomass
Authors:
Cornelis G. M. van 't Klooster,
Arnold van Ardenne
Abstract:
Radio-telescopes or ground-station antennas can, if pointed, act as a radar target with high radar cross-section (RCS). Space-based Synthetic Aperture Radar (SAR) data confirmed it at 5:3GHz for a modified ground-station antenna. Operational ground-station antennas cannot be modified. The latter antennas might operate at frequencies well above the radar band. The radar signal could be scattered wi…
▽ More
Radio-telescopes or ground-station antennas can, if pointed, act as a radar target with high radar cross-section (RCS). Space-based Synthetic Aperture Radar (SAR) data confirmed it at 5:3GHz for a modified ground-station antenna. Operational ground-station antennas cannot be modified. The latter antennas might operate at frequencies well above the radar band. The radar signal could be scattered with high RCS from such an antenna, with less influence due to a load (receiver). The antenna geometry should be precisely known to derive its RCS. BIOMASS SAR operates near 435 MHz (P-band). Results are given, also for BIOMASS antenna itself. Large antennas in an array as in Westerbork are of potential interest, located on an East-West line, nearly perpendicular to ascending and descending polar orbits. Related material is discussed.
△ Less
Submitted 9 November, 2021;
originally announced November 2021.
-
When Two Worlds Collide: Using Particle Physics Tools to Visualize the Limit Order Book
Authors:
Marjolein E. Verhulst,
Philippe Debie,
Stephan Hageboeck,
Joost M. E. Pennings,
Cornelis Gardebroek,
Axel Naumann,
Paul van Leeuwen,
Andres A. Trujillo-Barrera,
Lorenzo Moneta
Abstract:
We introduce a methodology to visualize the limit order book (LOB) using a particle physics lens. Open-source data-analysis tool ROOT, developed by CERN, is used to reconstruct and visualize futures markets. Message-based data is used, rather than snapshots, as it offers numerous visualization advantages. The visualization method can include multiple variables and markets simultaneously and is not…
▽ More
We introduce a methodology to visualize the limit order book (LOB) using a particle physics lens. Open-source data-analysis tool ROOT, developed by CERN, is used to reconstruct and visualize futures markets. Message-based data is used, rather than snapshots, as it offers numerous visualization advantages. The visualization method can include multiple variables and markets simultaneously and is not necessarily time dependent. Stakeholders can use it to visualize high-velocity data to gain a better understanding of markets or effectively monitor markets. In addition, the method is easily adjustable to user specifications to examine various LOB research topics, thereby complementing existing methods.
△ Less
Submitted 10 September, 2021;
originally announced September 2021.
-
Electrodeposited WS$_2$ Monolayers on Fabricated Graphene Electrodes
Authors:
Yasir J Noori,
Shibin Thomas,
Sami Ramadan,
Victoria K. Greenacre,
Nema M. Abdelazim,
Yisong Han,
Jiapei Zhang,
Richard Beanland,
Andrew L. Hector,
Norbert Klein,
Gillian Reid,
Philip Bartlett,
Cornelis H. de Groot
Abstract:
The development of scalable techniques to make 2D material heterostructures is a major obstacle that needs to be overcome before these materials can be implemented in device technologies industrially. Electrodeposition is an industrially compatible deposition technique that offers unique advantages in scaling 2D heterostructures. In this work, we demonstrate the electrodeposition of atomic layers…
▽ More
The development of scalable techniques to make 2D material heterostructures is a major obstacle that needs to be overcome before these materials can be implemented in device technologies industrially. Electrodeposition is an industrially compatible deposition technique that offers unique advantages in scaling 2D heterostructures. In this work, we demonstrate the electrodeposition of atomic layers of WS$_2$ over graphene electrodes using a single source precursor. Using conventional microfabrication techniques, graphene was patterned to create micro-electrodes where WS$_2$ was site-selectively deposited to form 2D heterostructures. We used various characterisation techniques, including atomic force microscopy, transmission electron microscopy, Raman spectroscopy and x-ray photoelectron spectroscopy to show that our electrodeposited WS$_2$ layers are highly uniform and can be grown over graphene at a controllable deposition rate. This technique to selectively deposit TMDCs over microfabricated graphene electrodes paves the way towards wafer-scale production of 2D material heterostructures for nanodevice applications.
△ Less
Submitted 31 August, 2021;
originally announced September 2021.
-
The Increase of the Airfoil Trailing Edge Noise and Unsteady Surface Pressure due to High Inflow Turbulence
Authors:
Laura Botero-Bolivar,
Fernanda L. dos Santos,
Cornelis H. Venner,
Leandro de Santana
Abstract:
Human factors, specifically visual impact and noise production, are the current main limitations for broader urban wind energy exploitation. Trailing edge noise, caused by the turbulent boundary layer interacting with the airfoil surface, is the primary source of noise of modern horizontal and vertical axis wind turbines. Low inflow turbulence levels do not affect the trailing edge noise. However,…
▽ More
Human factors, specifically visual impact and noise production, are the current main limitations for broader urban wind energy exploitation. Trailing edge noise, caused by the turbulent boundary layer interacting with the airfoil surface, is the primary source of noise of modern horizontal and vertical axis wind turbines. Low inflow turbulence levels do not affect the trailing edge noise. However, an inflow of high turbulence intensity has flow structures that can penetrate the boundary layer, increasing the velocity fluctuations inside the boundary layer and, consequently, the wall pressure fluctuations and trailing edge noise. This research investigates the effect of high free-stream turbulence, observed in the atmospheric boundary layer of urban zones, in the trailing edge noise generation. This was performed by measuring the increment of the turbulence inside of the boundary layer and surface pressure fluctuations near the trailing edge when an airfoil is submitted to high inflow turbulence. Experimental measurements were performed in the Aeroacoustic Wind Tunnel of the University of Twente on a NACA 0012 airfoil subjected to a turbulent inflow. The chord-based Reynolds number of the experiments ranged from 170 x 10^3 to 500 x 10^3. Results showed that high inflow turbulence significantly increases the velocity fluctuations and the integral length scale along the entire boundary layer, resulting in an increment of the surface pressure spectrum more than 6 dB and 10 dB in the entire frequency range for 10% and 20% of free-stream turbulence, respectively. The 10% free-stream turbulence increases the velocity fluctuations just in the low--frequency range, whereas the 20% inflow turbulence influences the velocity spectrum in the entire frequency range, increasing the size of the smallest structures of the turbulence. Amiet's theory is applied to predict the trailing edge far-field noise.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Influence of Surface Roughness Geometry on Trailing Edge Wall Pressure Fluctuations and Noise
Authors:
Fernanda L. dos Santos,
Nikolaj A. P. Even,
Laura Botero-Bolívar,
Cornelis H. Venner,
Leandro D. de Santana
Abstract:
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can alter the characteristics of the turbulent boundary layer, such as the spanwise correlation length, the boundary layer thickness, etc. This not only affects the a…
▽ More
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can alter the characteristics of the turbulent boundary layer, such as the spanwise correlation length, the boundary layer thickness, etc. This not only affects the aerodynamic performance but also the aeroacoustic characteristics of the tested model. Few studies have investigated the effects of surface roughness elements on the trailing edge near- and far-field noise. So far, the influence of roughness on the wall pressure fluctuations and spanwise coherence at the trailing edge has been left unexplored. Thus, this research addresses the effects of surface roughness geometries of different heights on the trailing edge wall pressure fluctuations, the spanwise coherence, and the far-field noise. Wind tunnel experiments were performed adopting zigzag strips and novel sharkskin-like surface roughness installed in a NACA 0012 at zero angle of attack. The tested surface roughness heights ranged from 29% to 233% of the undisturbed boundary layer thickness. The wall pressure fluctuations and the far-field noise were measured for Reynolds numbers from 1.3x10^5 to 3.3x10^5. It was observed that the surface roughness affects the low- and high-frequency range of the wall pressure spectrum, with trip heights in the range from 50% to 110% of the undisturbed boundary layer thickness having a slight level increase for low frequencies and no difference for high frequencies. The far-field noise increased for low and high frequencies as the trip height increased. The low-frequency increase is a consequence of the trip effects on the trailing edge wall pressure fluctuations, whereas for high frequencies the increase is due to the noise generated by the trip itself.
△ Less
Submitted 30 July, 2021;
originally announced July 2021.
-
Generating active T1 transitions through mechanochemical feedback
Authors:
Rastko Sknepnek,
Ilyas Djafer-Cherif,
Manli Chuai,
Cornelis J. Weijer,
Silke Henkes
Abstract:
Convergence-extension in embryos is controlled by chemical and mechanical signalling. A key cellular process is the exchange of neighbours via T1 transitions. We propose and analyse a model with positive feedback between recruitment of myosin motors and mechanical tension in cell junctions. The model produces active T1 events, which act to elongate the tissue perpendicular to external pulling. Usi…
▽ More
Convergence-extension in embryos is controlled by chemical and mechanical signalling. A key cellular process is the exchange of neighbours via T1 transitions. We propose and analyse a model with positive feedback between recruitment of myosin motors and mechanical tension in cell junctions. The model produces active T1 events, which act to elongate the tissue perpendicular to external pulling. Using an idealized tissue patch comprising several active cells embedded in a matrix of passive hexagonal cells we identified an optimal range of pulling forces to trigger an active T1 event. We show that pulling also generates tension chains in a realistic patch made entirely of active cells of random shapes, and leads to convergence-extension over a range of parameters. Our findings show that active intercalations can generate stress that activates T1 events in neighbouring cells resulting in tension dependent tissue re-organisation, in qualitative agreement with experiments on gastrulation in chick embryos.
△ Less
Submitted 3 April, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Projection-based embedded discrete fracture model (pEDFM) for flow and heat transfer in real-field geological formations with corner-point grid geometries
Authors:
Mousa HosseiniMehr,
Janio Piguave Tomala,
Cornelis Vuik,
Mohammed Al Kobaisi,
Hadi Hajibeygi
Abstract:
In this work, the projection-based embedded discrete fracture model (pEDFM) for corner-point grid (CPG) geometry is developed for simulation of flow and heat transfer in fractured porous media. Unlike classical embedded discrete fracture approaches, this method allows for using any geologically-relevant model with a complex geometry and generic conductivity contrasts between the rock matrix and th…
▽ More
In this work, the projection-based embedded discrete fracture model (pEDFM) for corner-point grid (CPG) geometry is developed for simulation of flow and heat transfer in fractured porous media. Unlike classical embedded discrete fracture approaches, this method allows for using any geologically-relevant model with a complex geometry and generic conductivity contrasts between the rock matrix and the fractures (or faults). The mass and energy conservation equations are coupled using the fully-implicit (FIM) scheme, allowing for stable simulation. Independent corner-point grids are imposed on the rock matrix and all fractures. The connectivities between the non-neighboring grid cells are described such that a consistent discrete representation of the embedded fractures occurs within the corner-point grid geometry. Various numerical tests including geologically-relevant and real-field models are conducted to demonstrate the performance of the developed method. It is shown that pEDFM can accurately capture the physical influence of both highly conductive fractures and flow barriers on the flow and heat transfer fields in complex reservoir geometries. This development casts a promising approach for flow simulations of real-field geo-models, increasing the discretization flexibility and enhancing the computational performance for capturing explicit fractures accurately.
△ Less
Submitted 12 May, 2021;
originally announced May 2021.
-
Real-time non-rigid 3D respiratory motion estimation for MR-guided radiotherapy using MR-MOTUS
Authors:
Niek R. F. Huttinga,
Tom Bruijnen,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
The MR-Linac is a combination of an MR-scanner and radiotherapy linear accelerator (Linac) which holds the promise to increase the precision of radiotherapy treatments with MR-guided radiotherapy by monitoring motion during radiotherapy with MRI, and adjusting the radiotherapy plan accordingly. Optimal MR-guidance for respiratory motion during radiotherapy requires MR-based 3D motion estimation wi…
▽ More
The MR-Linac is a combination of an MR-scanner and radiotherapy linear accelerator (Linac) which holds the promise to increase the precision of radiotherapy treatments with MR-guided radiotherapy by monitoring motion during radiotherapy with MRI, and adjusting the radiotherapy plan accordingly. Optimal MR-guidance for respiratory motion during radiotherapy requires MR-based 3D motion estimation with a latency of 200-500 ms. Currently this is still challenging since typical methods rely on MR-images, and are therefore limited by the 3D MR-imaging latency. In this work, we present a method to perform non-rigid 3D respiratory motion estimation with 170 ms latency, including both acquisition and reconstruction. The proposed method called real-time low-rank MR-MOTUS reconstructs motion-fields directly from k-space data, and leverages an explicit low-rank decomposition of motion-fields to split the large scale 3D+t motion-field reconstruction problem posed in our previous work into two parts: (I) a medium-scale offline preparation phase and (II) a small-scale online inference phase which exploits the results of the offline phase for real-time computations. The method was validated on free-breathing data of five volunteers, acquired with a 1.5T Elekta Unity MR-Linac. Results show that the reconstructed 3D motion-field are anatomically plausible, highly correlated with a self-navigation motion surrogate (R = 0.975 +/- 0.0110), and can be reconstructed with a total latency of 170 ms that is sufficient for real-time MR-guided abdominal radiotherapy.
△ Less
Submitted 14 September, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Energy-conserving formulation of the two-fluid model for incompressible two-phase flow in channels and pipes
Authors:
J. F. H. Buist,
B. Sanderse,
S. Dubinkina,
R. A. W. M. Henkes,
C. W. Oosterlee
Abstract:
We show that the one-dimensional (1D) two-fluid model (TFM) for stratified flow in channels and pipes (in its incompressible, isothermal form) satisfies an energy conservation equation, which arises naturally from the mass and momentum conservation equations that constitute the model. This result extends upon earlier work on the shallow water equations (SWE), with the important difference that we…
▽ More
We show that the one-dimensional (1D) two-fluid model (TFM) for stratified flow in channels and pipes (in its incompressible, isothermal form) satisfies an energy conservation equation, which arises naturally from the mass and momentum conservation equations that constitute the model. This result extends upon earlier work on the shallow water equations (SWE), with the important difference that we include non-conservative pressure terms in the analysis, and that we propose a formulation that holds for ducts with an arbitrary cross-sectional shape, with the 2D channel and circular pipe geometries as special cases.
The second novel result of this work is the formulation of a finite volume scheme for the TFM that satisfies a discrete form of the continuous energy equation. This discretization is derived in a manner that runs parallel to the continuous analysis. Due to the non-conservative pressure terms it is essential to employ a staggered grid, which requires careful consideration in defining the discrete energy and energy fluxes, and the relations between them and the discrete model. Numerical simulations confirm that the discrete energy is conserved.
△ Less
Submitted 21 December, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Measurement of the dynamic polarizability of Dy atoms near the 626-nm intercombination line
Authors:
Marian Kreyer,
Jeong Ho Han,
Cornelis Ravensbergen,
Vincent Corre,
Elisa Soave,
Emil Kirilov,
Rudolf Grimm
Abstract:
We report on measurements of the anisotropic dynamical polarizability of Dy near the 626-nm intercombination line, employing modulation spectroscopy in a one-dimensional optical lattice. To eliminate large systematic uncertainties resulting from the limited knowledge of the spatial intensity distribution, we use K as a reference species with accurately known polarizability. This method can be appl…
▽ More
We report on measurements of the anisotropic dynamical polarizability of Dy near the 626-nm intercombination line, employing modulation spectroscopy in a one-dimensional optical lattice. To eliminate large systematic uncertainties resulting from the limited knowledge of the spatial intensity distribution, we use K as a reference species with accurately known polarizability. This method can be applied independently of the sign of the polarizability, i.e., for both attractive and repulsive optical fields on both sides of a resonance. By variation of the laser polarization we extract the scalar and the tensorial part. To characterize the strength of the transition, we also derive the natural linewidth. We find our result to be in excellent agreement with literature values, which provide a sensitive benchmark for the accuracy of our method. In addition we demonstrate optical dipole trap** on the intercombination line, confirming the expected long lifetimes and low heating rates. This provides an additional tool to tailor optical potentials for Dy atoms and for the species-specific manipulation of atoms in the Dy-K mixture.
△ Less
Submitted 14 September, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Downfolding approaches to electron-ion coupling: Constrained density-functional perturbation theory for molecules
Authors:
Erik G. C. P. van Loon,
Jan Berges,
Tim O. Wehling
Abstract:
Constrained electronic-structure theories enable the construction of effective low-energy models consisting of partially dressed particles. However, the interpretation and physical content of these theories is not straightforward. Here, we carefully explore the properties of downfolding theories for electron-ion problems, in particular constrained density-functional perturbation theory (cDFPT). We…
▽ More
Constrained electronic-structure theories enable the construction of effective low-energy models consisting of partially dressed particles. However, the interpretation and physical content of these theories is not straightforward. Here, we carefully explore the properties of downfolding theories for electron-ion problems, in particular constrained density-functional perturbation theory (cDFPT). We show that the dipole selection rules determine whether the partially dressed phonons satisfy Goldstone's theorem, and we prove that electronic screening always lowers the phonon frequencies. We illustrate the theory with cDFPT calculations for minimal example systems: the nitrogen and benzene molecule as well as graphene.
△ Less
Submitted 10 May, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
A full gap above the Fermi level: the charge density wave of monolayer VS2
Authors:
Camiel van Efferen,
Jan Berges,
Joshua Hall,
Erik van Loon,
Stefan Kraus,
Arne Schobert,
Tobias Wekking,
Felix Huttmann,
Eline Plaar,
Nico Rothenbach,
Katharina Ollefs,
Lucas Machado Arruda,
Nick Brookes,
Gunnar Schoenhoff,
Kurt Kummer,
Heiko Wende,
Tim Wehling,
Thomas Michely
Abstract:
In the standard model of charge density wave (CDW) transitions, the displacement along a single phonon mode lowers the total electronic energy by creating a gap at the Fermi level, making the CDW a metal--insulator transition. Here, using scanning tunneling microscopy and spectroscopy and ab initio calculations, we show that VS$_2$ realizes a CDW which stands out of this standard model. There is a…
▽ More
In the standard model of charge density wave (CDW) transitions, the displacement along a single phonon mode lowers the total electronic energy by creating a gap at the Fermi level, making the CDW a metal--insulator transition. Here, using scanning tunneling microscopy and spectroscopy and ab initio calculations, we show that VS$_2$ realizes a CDW which stands out of this standard model. There is a full CDW gap residing in the unoccupied states of monolayer VS$_2$. At the Fermi level, the CDW induces a topological metal-metal (Lifshitz) transition. Non-linear coupling of transverse and longitudinal phonons is essential for the formation of the CDW and the full gap above the Fermi level. Additionally, x-ray magnetic circular dichroism reveals the absence of net magnetization in this phase, pointing to coexisting charge and spin density waves in the ground state.
△ Less
Submitted 8 September, 2021; v1 submitted 4 January, 2021;
originally announced January 2021.
-
A hybrid-integrated diode laser in the visible spectral range
Authors:
Cornelis A. A. Franken,
Albert van Rees,
Lisa V. Winkler,
Youwen Fan,
Dimitri Geskus,
Ronald Dekker,
Douwe H. Geuzebroek,
Carsten Fallnich,
Peter J. M. van der Slot,
Klaus-J. Boller
Abstract:
Generating visible light with wide tunability and high coherence based on photonic integrated circuits is of high interest for applications in biophotonics, precision metrology and quantum technology. Here we present the first demonstration of a hybrid-integrated diode laser in the visible spectral range. Using an AlGaInP optical amplifier coupled to a low-loss Si3N4 feedback circuit based on micr…
▽ More
Generating visible light with wide tunability and high coherence based on photonic integrated circuits is of high interest for applications in biophotonics, precision metrology and quantum technology. Here we present the first demonstration of a hybrid-integrated diode laser in the visible spectral range. Using an AlGaInP optical amplifier coupled to a low-loss Si3N4 feedback circuit based on microring resonators, we obtain a spectral coverage of 10.8 nm around 684.4 nm wavelength with up to 4.8 mW output power. The measured intrinsic linewidth is 2.3$\pm$0.2 kHz.
△ Less
Submitted 14 June, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
Enhanced persistence and collective migration in cooperatively aligning cell clusters
Authors:
Vincent E. Debets,
Liesbeth M. C. Janssen,
Cornelis Storm
Abstract:
Most cells possess the capacity to locomote. Alone or collectively, this allows them to adapt, to rearrange, and to explore their surroundings. The biophysical characterization of such motile processes, in health and disease, has so far focused mostly on two limiting cases: single-cell motility on the one hand, and the dynamics of confluent tissues such as the epithelium on the other. The in-betwe…
▽ More
Most cells possess the capacity to locomote. Alone or collectively, this allows them to adapt, to rearrange, and to explore their surroundings. The biophysical characterization of such motile processes, in health and disease, has so far focused mostly on two limiting cases: single-cell motility on the one hand, and the dynamics of confluent tissues such as the epithelium on the other. The in-between regime of clusters, composed of relatively few cells, moving as a coherent unit has received less attention. Such small clusters are, however, deeply relevant in development but also in cancer metastasis. In this work, we use cellular Potts models and analytical active matter theory to understand how the motility of small cell clusters changes with N, the number of cells in the cluster. Modeling and theory reveal our two main findings: Cluster persistence time increases with N while the intrinsic diffusivity decreases with N. We discuss a number of settings in which the motile properties of more complex clusters can be analytically understood, revealing that the focusing effects of small-scale cooperation and cell-cell alignment can overcome the increased bulkiness and internal disorder of multicellular clusters to enhance overall migrational efficacy. We demonstrate this enhancement for small-cluster collective durotaxis, which is shown to proceed more effectively than for single cells. Our results may provide some novel insights into the connection between single-cell and large-scale collective motion and may point the way to the biophysical origins of the enhanced metastatic potential of small tumor cell clusters.
△ Less
Submitted 1 September, 2020;
originally announced September 2020.
-
Fast and Accurate Modeling of Transient-State Gradient-Spoiled Sequences by Recurrent Neural Networks
Authors:
Hongyan Liu,
Oscar van der Heide,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Fast and accurate modeling of MR signal responses are typically required for various quantitative MRI applications, such as MR Fingerprinting and MR-STAT. This work uses a new EPG-Bloch model for accurate simulation of transient-state gradient-spoiled MR sequences, and proposes a Recurrent Neural Network (RNN) as a fast surrogate of the EPG-Bloch model for computing large-scale MR signals and deri…
▽ More
Fast and accurate modeling of MR signal responses are typically required for various quantitative MRI applications, such as MR Fingerprinting and MR-STAT. This work uses a new EPG-Bloch model for accurate simulation of transient-state gradient-spoiled MR sequences, and proposes a Recurrent Neural Network (RNN) as a fast surrogate of the EPG-Bloch model for computing large-scale MR signals and derivatives. The computational efficiency of the RNN model is demonstrated by comparing with other existing models, showing one to three orders of acceleration comparing to the latest GPU-accelerated open-source EPG package. By using numerical and in-vivo brain data, two use cases, namely MRF dictionary generation and optimal experimental design, are also provided. Results show that the RNN surrogate model can be efficiently used for computing large-scale dictionaries of transient-states signals and derivatives within tens of seconds, resulting in several orders of magnitude acceleration with respect to state-of-the-art implementations. The practical application of transient-states quantitative techniques can therefore be substantially facilitated.
△ Less
Submitted 21 August, 2020; v1 submitted 17 August, 2020;
originally announced August 2020.
-
Spatially sha** waves to penetrate deep inside a forbidden gap
Authors:
Ravitej Uppu,
Manashee Adhikary,
Cornelis A. M. Harteveld,
Willem L. Vos
Abstract:
It is well known that waves incident upon a crystal are transported only over a limited distance - the Bragg length - before being reflected by Bragg interference. Here, we demonstrate how to send waves much deeper into crystals, by studying light in exemplary two-dimensional silicon photonic crystals. By spatially sha** the optical wavefronts, we observe that the intensity of laterally scattere…
▽ More
It is well known that waves incident upon a crystal are transported only over a limited distance - the Bragg length - before being reflected by Bragg interference. Here, we demonstrate how to send waves much deeper into crystals, by studying light in exemplary two-dimensional silicon photonic crystals. By spatially sha** the optical wavefronts, we observe that the intensity of laterally scattered light, that probes the internal energy density, is enhanced at a tunable distance away from the front surface. The intensity is up to $100 \times$ enhanced compared to random wavefronts and extends as far as $8 \times$ the Bragg length. Our novel steering of waves inside a forbidden gap exploits the transport channels induced by unavoidable deviations from perfect periodicity, here unavoidable fabrication deviations.
△ Less
Submitted 21 July, 2020;
originally announced July 2020.
-
Non-rigid 3D motion estimation at high temporal resolution from prospectively undersampled k-space data using low-rank MR-MOTUS
Authors:
Niek R. F. Huttinga,
Tom Bruijnen,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
With the recent introduction of the MR-LINAC, an MR-scanner combined with a radiotherapy LINAC, MR-based motion estimation has become of increasing interest to (retrospectively) characterize tumor and organs-at-risk motion during radiotherapy. To this extent, we introduce low-rank MR-MOTUS, a framework to retrospectively reconstruct time-resolved non-rigid 3D+t motion-fields from a single low-reso…
▽ More
With the recent introduction of the MR-LINAC, an MR-scanner combined with a radiotherapy LINAC, MR-based motion estimation has become of increasing interest to (retrospectively) characterize tumor and organs-at-risk motion during radiotherapy. To this extent, we introduce low-rank MR-MOTUS, a framework to retrospectively reconstruct time-resolved non-rigid 3D+t motion-fields from a single low-resolution reference image and prospectively undersampled k-space data acquired during motion. Low-rank MR-MOTUS exploits spatio-temporal correlations in internal body motion with a low-rank motion model, and inverts a signal model that relates motion-fields directly to a reference image and k-space data. The low-rank model reduces the degrees-of-freedom, memory consumption and reconstruction times by assuming a factorization of space-time motion-fields in spatial and temporal components. Low-rank MR-MOTUS was employed to estimate motion in 2D/3D abdominothoracic scans and 3D head scans. Data were acquired using golden-ratio radial readouts. Reconstructed 2D and 3D respiratory motion-fields were respectively validated against time-resolved and respiratory-resolved image reconstructions, and the head motion against static image reconstructions from fully-sampled data acquired right before and right after the motion. Results show that 2D+t respiratory motion can be estimated retrospectively at 40.8 motion-fields-per-second, 3D+t respiratory motion at 7.6 motion-fields-per-second and 3D+t head-neck motion at 9.3 motion-fields-per-second. The validations show good consistency with image reconstructions. The proposed framework can estimate time-resolved non-rigid 3D motion-fields, which allows to characterize drifts and intra and inter-cycle patterns in breathing motion during radiotherapy, and could form the basis for real-time MR-guided radiotherapy.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
A non-reflective boundary condition for LBM based on the assumption of non-equilibrium symmetry
Authors:
R. Euser,
C. Vuik
Abstract:
In this study a new type of non-reflective boundary condition (NRBC) for the Lattice Boltzmann Method (LBM) is proposed; the Non-equilibrium Symmetry Boundary Condition (NSBC). The idea behind this boundary condition is to utilize the characteristics of the non-equilibrium distribution function to assign values to the incoming populations. A simple gradient based extrapolation technique and a far-…
▽ More
In this study a new type of non-reflective boundary condition (NRBC) for the Lattice Boltzmann Method (LBM) is proposed; the Non-equilibrium Symmetry Boundary Condition (NSBC). The idea behind this boundary condition is to utilize the characteristics of the non-equilibrium distribution function to assign values to the incoming populations. A simple gradient based extrapolation technique and a far-field criterion are used to predict the macroscopic fluid variables. To demonstrate the non-reflective behaviour of the NSBC, two different tests have been carried out, examining the capability of the boundary to absorb acoustic waves respectively vortices. The results for both tests show that the amount of reflection generated by the NSBC is nearly zero.
△ Less
Submitted 12 June, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Large-Area Electrodeposition of Few-Layer MoS2 on Graphene for 2D Material Heterostructures
Authors:
Yasir J. Noori,
Shibin Thomas,
Sami Ramadan,
Danielle E. Smith,
Victoria K. Greenacre,
Nema Abdelazim,
Yisong Han,
Richard Beanland,
Andrew L. Hector,
Norbert Klein,
Gill Reid,
Phillip N. Bartlett,
Cornelis H. de Groot
Abstract:
Heterostructures involving two-dimensional (2D) transition metal dichalcogenides and other materials such as graphene have a strong potential to be the fundamental building block of many electronic and opto-electronic applications. The integration and scalable fabrication of such heterostructures is of essence in unleashing the potential of these materials in new technologies. For the first time,…
▽ More
Heterostructures involving two-dimensional (2D) transition metal dichalcogenides and other materials such as graphene have a strong potential to be the fundamental building block of many electronic and opto-electronic applications. The integration and scalable fabrication of such heterostructures is of essence in unleashing the potential of these materials in new technologies. For the first time, we demonstrate the growth of few-layer MoS2 films on graphene via non-aqueous electrodeposition. Through methods such as scanning and transmission electron microscopy, atomic force microscopy, Raman spectroscopy, energy and wavelength dispersive X-ray spectroscopies and X-ray photoelectron spectroscopy, we show that this deposition method can produce large-area MoS2 films with high quality and uniformity over graphene. We reveal the potential of these heterostructures by measuring the photo-induced current through the film. These results pave the way towards develo** the electrodeposition method for the large-scale growth of heterostructures consisting of varying 2D materials for many applications.
△ Less
Submitted 22 November, 2020; v1 submitted 18 May, 2020;
originally announced May 2020.
-
Surface plasmon enhanced fast electron emission from metallised fibre optic nanotips
Authors:
Sam Keramati,
Ali Passian,
Vineet Khullar,
Joshua Beck,
Cornelis Uiterwaal,
Herman Batelaan
Abstract:
Physical mechanisms of electron emission from fibre optic nanotips, namely, tunnelling, multi-photon, and thermionic emission, either prevent fast switching or require intense laser fields. Time-resolved electron emission from nano-sized sources finds applications ranging from material characterisation to fundamental studies of quantum coherence. We present a nano-sized electron source capable of…
▽ More
Physical mechanisms of electron emission from fibre optic nanotips, namely, tunnelling, multi-photon, and thermionic emission, either prevent fast switching or require intense laser fields. Time-resolved electron emission from nano-sized sources finds applications ranging from material characterisation to fundamental studies of quantum coherence. We present a nano-sized electron source capable of fast-switching (<1 ns) that can be driven with low-power femtosecond lasers. The physical mechanism that can explain emission at low laser power is surface plasmon enhanced above-threshold photoemission. An electron emission peak is observed and provides support for resonant plasmonic excitation. The electron source is a metal-coated optical fibre tapered into a nano-sized tip. The fibre is flexible and back illuminated facilitating ease of positioning. The source operates with a few nJ per laser pulse, making this a versatile emitter that enables nanometrology, multisource electron-lithography and scanning probe microscopy.
Keywords: fibre optic nanotip, surface plasmon resonance, multi-photon emission, above-threshold emission
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Spacecraft Tracking Applications of the Square Kilometre Array
Authors:
J. G. Bij de Vaate,
L. I. Gurvits,
S. V. Pogrebenko,
C. G. M. van t Klooster
Abstract:
The Square Kilometre Array (SKA) is the next generation radio telescope distinguished by a superb sensitivity due to its large aperture (about one square kilometre) and advanced instrumentation. It will cover a broad range of observing bands including those used for tracking of and communications to deep space missions. While spacecraft tracking is not a main application defining the technical spe…
▽ More
The Square Kilometre Array (SKA) is the next generation radio telescope distinguished by a superb sensitivity due to its large aperture (about one square kilometre) and advanced instrumentation. It will cover a broad range of observing bands including those used for tracking of and communications to deep space missions. While spacecraft tracking is not a main application defining the technical specifications of the SKA, this facility might play a role in tracking deep space probes as a backup to the ``dedicated'' deep space tracking networks. This paper presents possible applications of the SKA as a deep space tracking facility and major related technical specifications of various concepts of the SKA. It was presented at the 3rd International Workshop on Tracking, Telemetry and Command Systems for Space Applications, ESA-ESOC, Darmstadt, Germany, 7-9 September 2004. Over the past years, the SKA concept has developed to a much higher level of detalisation and is currently at the implementation phase. A number of specific considerations in this presentation no longer correspond to the actual status of the SKA project. However, the overall concept of the SKA applications for communication and tracking of interplanetary spacecraft remain topical, and some approaches presented here remain of interest for prospective deep space missions.
△ Less
Submitted 23 February, 2020;
originally announced February 2020.
-
SND@LHC
Authors:
SHiP Collaboration,
C. Ahdida,
A. Akmete,
R. Albanese,
A. Alexandrov,
M. Andreini,
A. Anokhina,
S. Aoki,
G. Arduini,
E. Atkin,
N. Azorskiy,
J. J. Back,
A. Bagulya,
F. Baaltasar Dos Santos,
A. Baranov,
F. Bardou,
G. J. Barker,
M. Battistin,
J. Bauche,
A. Bay,
V. Bayliss,
G. Bencivenni,
A. Y. Berdnikov,
Y. A. Berdnikov,
M. Bertani
, et al. (319 additional authors not shown)
Abstract:
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1)…
▽ More
We propose to build and operate a detector that, for the first time, will measure the process $pp\toνX$ at the LHC and search for feebly interacting particles (FIPs) in an unexplored domain. The TI18 tunnel has been identified as a suitable site to perform these measurements due to very low machine-induced background. The detector will be off-axis with respect to the ATLAS interaction point (IP1) and, given the pseudo-rapidity range accessible, the corresponding neutrinos will mostly come from charm decays: the proposed experiment will thus make the first test of the heavy flavour production in a pseudo-rapidity range that is not accessible by the current LHC detectors. In order to efficiently reconstruct neutrino interactions and identify their flavour, the detector will combine in the target region nuclear emulsion technology with scintillating fibre tracking layers and it will adopt a muon identification system based on scintillating bars that will also play the role of a hadronic calorimeter. The time of flight measurement will be achieved thanks to a dedicated timing detector. The detector will be a small-scale prototype of the scattering and neutrino detector (SND) of the SHiP experiment: the operation of this detector will provide an important test of the neutrino reconstruction in a high occupancy environment.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Reflectivity of Finite 3D GaAs Photonic Band Gap Crystals
Authors:
Takeyoshi Tajiri,
Shun Takahashi,
Cornelis A. M. Harteveld,
Yasuhiko Arakawa,
Satoshi Iwamoto,
Willem L. Vos
Abstract:
We study the optical reflectivity of three-dimensional (3D) photonic band gap crystals with increasing thickness. The crystals consist of GaAs plates with nanorod arrays that are assembled by an advanced stacking method into high-quality 3D woodpile structures. We observe intense and broad reflectivity peak with stop bands that correspond to a broad gap in the photonic band structures. The maximum…
▽ More
We study the optical reflectivity of three-dimensional (3D) photonic band gap crystals with increasing thickness. The crystals consist of GaAs plates with nanorod arrays that are assembled by an advanced stacking method into high-quality 3D woodpile structures. We observe intense and broad reflectivity peak with stop bands that correspond to a broad gap in the photonic band structures. The maximum reflectivity quickly reaches high values even for a few crystal layers. Remarkably, the bandwidth of the stop bands hardly decreases with increasing crystal thickness, in good agreement with FDTD simulations. This behavior differs remarkably from the large changes observed earlier in weakly interacting 3D photonic crystals. The nearly constant bandwidth and high reflectivity are rationalized by multiple Bragg interference that occurs in strongly interacting photonic band gap crystals, whereby the incident light scatters from multiple reciprocal lattice vectors simultaneously, in particular from oblique ones that are parallel to a longer crystal dimension and thus experience hardly any finite size effects. Our new insights have favorable consequences for the application of 3D photonic band gap crystals, notably since even thin structures reveal the full band gap functionality, including devices that shield quantum bits from vacuum fluctuations.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
Performance of the GridPix detector quad
Authors:
Cornelis Ligtenberg,
Yevgen Bilevych,
Klaus Desch,
Harry van der Graaf,
Markus Gruber,
Fred Hartjes,
Kevin Heijhoff,
Jochen Kaminski,
Peter M. Kluit,
Naomi van der Kolk,
Gerhard Raven,
Tobias Schiffer,
Jan Timmermans
Abstract:
A gaseous pixel readout module with four GridPix chips, called the quad, has been developed as a building block for a large time projection chamber readout plane. The quad module has dimensions 39.6 mm $\times$ 28.38 mm and an active surface coverage of 68.9%. The GridPix chip consists of a Timepix3 chip with integrated amplification grid and have a high efficiency to detect single ionisation elec…
▽ More
A gaseous pixel readout module with four GridPix chips, called the quad, has been developed as a building block for a large time projection chamber readout plane. The quad module has dimensions 39.6 mm $\times$ 28.38 mm and an active surface coverage of 68.9%. The GridPix chip consists of a Timepix3 chip with integrated amplification grid and have a high efficiency to detect single ionisation electrons, which enable to make a precise track position measurement. A quad module was installed in a small time projection chamber and measurements of 2.5 GeV electrons were performed at the ELSA accelerator in Bonn, where a silicon telescope was used to provide a reference track. The error on the track position measurement, both in the pixel plane and drift direction, is dominated by diffusion. The quad was designed to have minimum electrical field inhomogeneities and distortions, achieving systematics of better than 13 $μ$m in the pixel plane. The resolution of the setup is 41 $μ$m, where the total systematic error of the quad detector is 24 $μ$m.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
CBCT-to-CT synthesis with a single neural network for head-and-neck, lung and breast cancer adaptive radiotherapy
Authors:
Matteo Maspero,
Mark HF Savenije,
Tristan CF van Heijst,
Joost JC Verhoeff,
Alexis NTJ Kotte,
Anette C Houweling,
Cornelis AT van den Berg
Abstract:
Purpose: CBCT-based adaptive radiotherapy requires daily images for accurate dose calculations. This study investigates the feasibility of applying a single convolutional network to facilitate CBCT-to-CT synthesis for head-and-neck, lung, and breast cancer patients. Methods: Ninety-nine patients diagnosed with head-and-neck, lung or breast cancer undergoing radiotherapy with CBCT-based position ve…
▽ More
Purpose: CBCT-based adaptive radiotherapy requires daily images for accurate dose calculations. This study investigates the feasibility of applying a single convolutional network to facilitate CBCT-to-CT synthesis for head-and-neck, lung, and breast cancer patients. Methods: Ninety-nine patients diagnosed with head-and-neck, lung or breast cancer undergoing radiotherapy with CBCT-based position verification were included in this study. CBCTs were registered to planning CTs according to clinical procedures. Three cycle-consistent generative adversarial networks (cycle-GANs) were trained in an unpaired manner on 15 patients per anatomical site generating synthetic-CTs (sCTs). Another network was trained with all the anatomical sites together. Performances of all four networks were compared and evaluated for image similarity against rescan CT (rCT). Clinical plans were recalculated on CT and sCT and analysed through voxel-based dose differences and γ-analysis. Results: A sCT was generated in 10 seconds. Image similarity was comparable between models trained on different anatomical sites and a single model for all sites. Mean dose differences < 0.5% were obtained in high-dose regions. Mean gamma (2%,2mm) pass-rates > 95% were achieved for all sites. Conclusions: Cycle-GAN reduced CBCT artefacts and increased HU similarity to CT, enabling sCT-based dose calculations. The speed of the network can facilitate on-line adaptive radiotherapy using a single network for head-and-neck, lung and breast cancer patients.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.