-
Deep Few-view High-resolution Photon-counting Extremity CT at Halved Dose for a Clinical Trial
Authors:
Mengzhou Li,
Chuang Niu,
Ge Wang,
Maya R Amma,
Krishna M Chapagain,
Stefan Gabrielson,
Andrew Li,
Kevin Jonker,
Niels de Ruiter,
Jennifer A Clark,
Phil Butler,
Anthony Butler,
Hengyong Yu
Abstract:
The latest X-ray photon-counting computed tomography (PCCT) for extremity allows multi-energy high-resolution (HR) imaging for tissue characterization and material decomposition. However, both radiation dose and imaging speed need improvement for contrast-enhanced and other studies. Despite the success of deep learning methods for 2D few-view reconstruction, applying them to HR volumetric reconstr…
▽ More
The latest X-ray photon-counting computed tomography (PCCT) for extremity allows multi-energy high-resolution (HR) imaging for tissue characterization and material decomposition. However, both radiation dose and imaging speed need improvement for contrast-enhanced and other studies. Despite the success of deep learning methods for 2D few-view reconstruction, applying them to HR volumetric reconstruction of extremity scans for clinical diagnosis has been limited due to GPU memory constraints, training data scarcity, and domain gap issues. In this paper, we propose a deep learning-based approach for PCCT image reconstruction at halved dose and doubled speed in a New Zealand clinical trial. Particularly, we present a patch-based volumetric refinement network to alleviate the GPU memory limitation, train network with synthetic data, and use model-based iterative refinement to bridge the gap between synthetic and real-world data. The simulation and phantom experiments demonstrate consistently improved results under different acquisition conditions on both in- and off-domain structures using a fixed network. The image quality of 8 patients from the clinical trial are evaluated by three radiologists in comparison with the standard image reconstruction with a full-view dataset. It is shown that our proposed approach is essentially identical to or better than the clinical benchmark in terms of diagnostic image quality scores. Our approach has a great potential to improve the safety and efficiency of PCCT without compromising image quality.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
The Beta-decay Paul Trap Mk IV: Design and commissioning
Authors:
L. Varriano,
G. Savard,
J. A. Clark,
D. P. Burdette,
M. T. Burkey,
A. T. Gallant,
T. Y. Hirsh,
B. Longfellow,
N. D. Scielzo,
R. Segel,
E. J. Boron III,
M. Brodeur,
N. Callahan,
A. Cannon,
K. Kolos,
B. Liu,
S. Lopez-Caceres,
M. Gott,
B. Maaß,
S. T. Marley,
C. Mohs,
G. E. Morgan,
P. Mueller,
M. Oberling,
P. D. O'Malley
, et al. (7 additional authors not shown)
Abstract:
The Beta-decay Paul Trap is an open-geometry, linear trap used to measure the decays of $^8$Li and $^8$B to search for a tensor contribution to the weak interaction. In the latest $^8$Li measurement of Burkey et al. (2022), $β$ scattering was the dominant experimental systematic uncertainty. The Beta-decay Paul Trap Mk IV reduces the prevalence of $β$ scattering by a factor of 4 through a redesign…
▽ More
The Beta-decay Paul Trap is an open-geometry, linear trap used to measure the decays of $^8$Li and $^8$B to search for a tensor contribution to the weak interaction. In the latest $^8$Li measurement of Burkey et al. (2022), $β$ scattering was the dominant experimental systematic uncertainty. The Beta-decay Paul Trap Mk IV reduces the prevalence of $β$ scattering by a factor of 4 through a redesigned electrode geometry and the use of glassy carbon and graphite as electrode materials. The trap has been constructed and successfully commissioned with $^8$Li in a new data campaign that collected 2.6 million triple coincidence events, an increase in statistics by 30% with 4 times less $β$ scattering compared to the previous $^8$Li data set.
△ Less
Submitted 30 October, 2023;
originally announced November 2023.
-
Gaussian mixture model clustering algorithms for the analysis of high-precision mass measurements
Authors:
Colin M. Weber,
Dwaipayan Ray,
Adrian A. Valverde,
Jason A. Clark,
Kumar S. Sharma
Abstract:
The development of the phase-imaging ion-cyclotron resonance (PI-ICR) technique for use in Penning trap mass spectrometry (PTMS) increased the speed and precision with which PTMS experiments can be carried out. In PI-ICR, data sets of the locations of individual ion hits on a detector are created showing how ions cluster together into spots according to their cyclotron frequency. Ideal data sets w…
▽ More
The development of the phase-imaging ion-cyclotron resonance (PI-ICR) technique for use in Penning trap mass spectrometry (PTMS) increased the speed and precision with which PTMS experiments can be carried out. In PI-ICR, data sets of the locations of individual ion hits on a detector are created showing how ions cluster together into spots according to their cyclotron frequency. Ideal data sets would consist of a single, 2D-spherical spot with no other noise, but in practice data sets typically contain multiple spots, non-spherical spots, or significant noise, all of which can make determining the locations of spot centers non-trivial. A method for assigning groups of ions to their respective spots and determining the spot centers is therefore essential for further improving precision and confidence in PI-ICR experiments. We present the class of Gaussian mixture model (GMM) clustering algorithms as an optimal solution. We show that on simulated PI-ICR data, several types of GMM clustering algorithms perform better than other clustering algorithms over a variety of typical scenarios encountered in PI-ICR. The mass spectra of $^{163}\text{Gd}$, $^{163m}\text{Gd}$, $^{162}\text{Tb}$, and $^{162m}\text{Tb}$ measured using PI-ICR at the Canadian Penning trap mass spectrometer were checked using GMMs, producing results that were in close agreement with the previously published values.
△ Less
Submitted 11 December, 2021; v1 submitted 18 August, 2021;
originally announced August 2021.
-
Adapting LIGO workflows to run in the Open Science Grid
Authors:
Edgar Fajardo,
Frank Wuerthwein,
Brian Bockelman,
Miron Livny,
Greg Thain,
James Alexander Clark,
Peter Couvares,
Josh Willis
Abstract:
During the first observation run the LIGO collaboration needed to offload some of its most, intense CPU workflows from its dedicated computing sites to opportunistic resources. Open Science Grid enabled LIGO to run PyCbC, RIFT and Bayeswave workflows to seamlessly run in a combination of owned and opportunistic resources. One of the challenges is enabling the workflows to use several heterogeneous…
▽ More
During the first observation run the LIGO collaboration needed to offload some of its most, intense CPU workflows from its dedicated computing sites to opportunistic resources. Open Science Grid enabled LIGO to run PyCbC, RIFT and Bayeswave workflows to seamlessly run in a combination of owned and opportunistic resources. One of the challenges is enabling the workflows to use several heterogeneous resources in a coordinated and effective way.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Sn4+ Precursor Enables 12.4% Efficient Kesterite Solar Cell from DMSO Solution with Open Circuit Voltage Deficit Below 0.30 V
Authors:
Yuancai Gong,
Yifan Zhang,
Erin Jedlicka,
Rajiv Giridharagopal,
James A. Clark,
Weibo Yan,
Chuanyou Niu,
Ruichan Qiu,
**g**g Jiang,
Shaotang Yu,
San** Wu,
Hugh W. Hillhouse,
David S. Ginger,
Wei Huang,
Hao Xin
Abstract:
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of 12.6%. In this work, SnCl4 and SnCl2_2H2O are respectively used as tin precursor to investigate the Voc,def issue of dimethyl sulfoxide (DMSO) solution processed CZ…
▽ More
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of 12.6%. In this work, SnCl4 and SnCl2_2H2O are respectively used as tin precursor to investigate the Voc,def issue of dimethyl sulfoxide (DMSO) solution processed CZTSSe solar cells. Different complexations of tin compounds with thiourea and DMSO lead to different reaction pathways from solution to absorber material and thus dramatic difference in photovoltaic performance. The coordination of Sn2+ with Tu leads to the formation of SnS and ZnS and Cu2S in the precursor film, which converted to selenides first and then fused to CZTSSe, resulting in poor film quality and device performance. The highest efficiency obtained from this film is 8.84% with a Voc,def of 0.391V. The coordination of Sn4+ with DMSO facilitates direct formation ofkesterite CZTS phase in the precursor film which directed converted to CZTSSe during selenization, resulting in compositional uniform absorber and high device performance. A device with active area efficiency 12.2% and a Voc,def of 0.344 V was achieved from Sn4+ solution processed absorber. Furthermore, CZTSSe/CdS heterojunction heat treatment (JHT) significantly improved Sn4+ device performance but had slightly negative effect on Sn2+ device. A champion CZTSSe solar cell with a total area efficiency of 12.4% (active are efficiency 13.6%) and low Voc,def of 0.297 V was achieved from Sn4+ solution. Our results demonstrate the preformed uniform kesterite phase enabled by Sn4+ precursor is the key in achieving highly efficient kesterite absorber material. The lowest Voc-def and high efficiency achieved here shines new light on the future of kesterite solar cell.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Astrophysical science metrics for next-generation gravitational-wave detectors
Authors:
Rana X Adhikari,
P Ajith,
Yanbei Chen,
James A Clark,
Vladimir Dergachev,
Nicolas V Fotopoulos,
Sarah E. Gossan,
Ilya Mandel,
Maria Okounkova,
Vivien Raymond,
Jocelyn S Read
Abstract:
The second generation of gravitational-wave detectors are being built and tuned all over the world. The detection of signals from binary black holes is beginning to fulfill the promise of gravitational-wave astronomy. In this work, we examine several possible configurations for third-generation laser interferometers in existing km-scale facilities. We propose a set of astrophysically motivated met…
▽ More
The second generation of gravitational-wave detectors are being built and tuned all over the world. The detection of signals from binary black holes is beginning to fulfill the promise of gravitational-wave astronomy. In this work, we examine several possible configurations for third-generation laser interferometers in existing km-scale facilities. We propose a set of astrophysically motivated metrics to evaluate detector performance. We measure the impact of detector design choices against these metrics, providing a quantitative cost-benefit analyses of the resulting scientific payoffs.
△ Less
Submitted 20 May, 2019; v1 submitted 7 May, 2019;
originally announced May 2019.
-
A Precessing Numerical Relativity Waveform Surrogate Model for Binary Black Holes: A Gaussian Process Regression Approach
Authors:
Daniel Williams,
Ik Siong Heng,
Jonathan Gair,
James A Clark,
Bhavesh Khamesra
Abstract:
Gravitational wave astrophysics relies heavily on the use of matched filtering both to detect signals in noisy data from detectors, and to perform parameter estimation on those signals. Matched filtering relies upon prior knowledge of the signals expected to be produced by a range of astrophysical systems, such as binary black holes. These waveform signals can be computed using numerical relativit…
▽ More
Gravitational wave astrophysics relies heavily on the use of matched filtering both to detect signals in noisy data from detectors, and to perform parameter estimation on those signals. Matched filtering relies upon prior knowledge of the signals expected to be produced by a range of astrophysical systems, such as binary black holes. These waveform signals can be computed using numerical relativity techniques, where the Einstein field equations are solved numerically, and the signal is extracted from the simulation. Numerical relativity simulations are, however, computationally expensive, leading to the need for a surrogate model which can predict waveform signals in regions of the physical parameter space which have not been probed directly by simulation. We present a method for producing such a surrogate using Gaussian process regression which is trained directly on waveforms generated by numerical relativity. This model returns not just a single interpolated value for the waveform at a new point, but a full posterior probability distribution on the predicted value. This model is therefore an ideal component in a Bayesian analysis framework, through which the uncertainty in the interpolation can be taken into account when performing parameter estimation of signals.
△ Less
Submitted 13 February, 2020; v1 submitted 21 March, 2019;
originally announced March 2019.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
The X-Array and SATURN: A new decay-spectroscopy station for CARIBU
Authors:
A. J. Mitchell,
P. F. Bertone,
B. DiGiovine,
C. J. Lister,
M. P. Carpenter,
P. Chowdhury,
J. A. Clark,
N. D'Olympia,
A. Y. Deo,
F. G. Kondev,
E. A. McCutchan,
J. Rohrer,
G. Savard,
D. Seweryniak,
S. Zhu
Abstract:
A new decay-spectroscopy station has been commissioned for experiments with low-energy, fission-fragment radioactive beams from the CARIBU ion source. The new set-up consists of the 'X-array', a highly-efficient array of HPGe clover detectors, and 'SATURN' (Scintillator And Tape Using Radioactive Nuclei), a plastic scintillator detector combined with a tape-transport system for detection of beta p…
▽ More
A new decay-spectroscopy station has been commissioned for experiments with low-energy, fission-fragment radioactive beams from the CARIBU ion source. The new set-up consists of the 'X-array', a highly-efficient array of HPGe clover detectors, and 'SATURN' (Scintillator And Tape Using Radioactive Nuclei), a plastic scintillator detector combined with a tape-transport system for detection of beta particles and removal of long-lived isobaric decay products.
△ Less
Submitted 19 December, 2015;
originally announced December 2015.
