-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Recovering the activity parameters of an active fluid confined in a sphere
Authors:
Cristian Villalobos,
María Luisa Cordero,
Eric Clément,
Rodrigo Soto
Abstract:
The properties of an active fluid, for example, a bacterial bath or a collection of microtubules and molecular motors, can be accessed through the dynamics of passive particle probes. Here, in the perspective of analyzing experimental situations of confinement in droplets, we consider the kinematics of a negatively buoyant probe particle in an active fluid, both confined within a spherical domain.…
▽ More
The properties of an active fluid, for example, a bacterial bath or a collection of microtubules and molecular motors, can be accessed through the dynamics of passive particle probes. Here, in the perspective of analyzing experimental situations of confinement in droplets, we consider the kinematics of a negatively buoyant probe particle in an active fluid, both confined within a spherical domain. The active bath generates a fluctuating flow that pushes the particle with a velocity that is modeled as a colored stochastic noise, characterized by two parameters, the intensity and memory time of the active flow. When the particle departs a little from the bottom of the spherical domain, the configuration is well approximated by a particle in a two-dimensional harmonic trap subjected to the colored noise, in which case an analytical solution exists, which is the base for quantitative analysis. We numerically simulate the dynamics of the particle and use the planar, two-dimensional mean square displacement to recover the activity parameters of the bath. This approach yields satisfactory results as long as the particle remains relatively confined, that is, as long as the intensity of the colored noise remains low.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
CATLIFE (Complementary Arm for Target LIke FragmEnts): Spectrometer for Target like fragments at VAMOS++
Authors:
Y. Son,
Y. H. Kim,
Y. Cho,
S. Choi,
S. Bae,
K. I. Hahn,
J. Park,
A. Navin,
A. Lemasson,
M. Rejmund,
D. Ramos,
E. Clément,
D. Ackermann,
A. Utepov,
C. Fougeres,
J. C. Thomas,
J. Goupil,
G. Fremont,
G. de France
Abstract:
The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGA…
▽ More
The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGAM HPGe clover detectors with an ion flight length of 1230 mm. Direct measurement of the target-like fragments (TLF) and the delayed $γ$-rays from the isomeric state helps to improve TLF identification. The use of the velocity of TLFs and the delayed $γ$-ray demonstrate the proof of principle and effectiveness of the new setup.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
AGATA DAQ-box: a unified data acquisition system for different experimental conditions
Authors:
Amel Korichi,
Emmanuel Clément,
Nicolas Dosme,
Eric Legay,
Olivier Stézowski,
Alain Goasduff,
Yann Aubert,
Jéremie Dudouet,
Souhir Elloumi,
Phillipe Gauron,
Xavier Grave,
Michele Gulmini,
Jéremie Jacob,
Vincent Lafage,
Patrick Le Jeannic,
Guillaume Lalaire,
Joa Ljungvall,
Clothilde Maugeais,
Caterina Michelagnoli,
Roméo Molini,
Guillaume Philippon,
Stephane Pietri,
Damian Ralet,
Marco Roetta,
Frederic Saillant
, et al. (2 additional authors not shown)
Abstract:
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and contro…
▽ More
The AGATA tracking detector array represents a significant improvement over previous Compton suppressed arrays. The construction of AGATA led to numerous technological breakthroughs in order to meet the requirements and the challenges of building a mobile detector across Europe. This paper focuses on the design and implementation of the data acquisition system responsible of the readout and control of the germanium detectors of AGATA. Our system is highly versatile, capable of instrumenting AGATA and seamlessly adapting it to various configurations with a wide range of ancillary detectors and/or spectrometers. It consists of three main components: an autonomous and independent infrastructure, a dedicated application core ensuring overall consistency, and a high--performance software package providing a fully integrated data flow management including the setting-up, the supervision and the slow control of the instrument. In this paper, we present a comprehensive analysis of the system's design and performance, particularly under high-counting rate conditions.
△ Less
Submitted 21 July, 2023; v1 submitted 29 May, 2023;
originally announced May 2023.
-
Dispersion of motile bacteria in a porous medium
Authors:
Marco Dentz,
Adama Creppy,
Carine Douarche,
Eric Clément,
Harold Auradou
Abstract:
Understanding flow and transport of bacteria in porous media is crucial to technologies such as bioremediation, biomineralization or enhanced oil recovery. While physicochemical bacteria filtration is well-documented, recent studies showed that bacterial motility plays a key role in the transport process. Flow and transport experiments performed in microfluidic chips containing randomly placed obs…
▽ More
Understanding flow and transport of bacteria in porous media is crucial to technologies such as bioremediation, biomineralization or enhanced oil recovery. While physicochemical bacteria filtration is well-documented, recent studies showed that bacterial motility plays a key role in the transport process. Flow and transport experiments performed in microfluidic chips containing randomly placed obstacles confirmed that the distributions of non-motile particles stays compact, whereas for the motile strains, the distributions are characterized by both significant retention as well as fast downstream motion. For motile bacteria, the detailed microscopic study of individual bacteria trajectories reveals two salient features: (i) the emergence of an active retention process triggered by motility, (ii) enhancement of dispersion due to the exchange between fast flow channels and low flow regions in the vicinity of the solid grains. We propose a physical model based on a continuous time random walk approach. This approach accounts for bacteria dispersion via variable pore-scale flow velocities through a Markov model for equidistant particle speeds. Motility of bacteria is modeled by a two-rate trap** process that accounts for the motion towards and active trap** at the obstacles. This approach captures the forward tails observed for the distribution of bacteria displacements, and quantifies an enhanced hydrodynamic dispersion effect that originates in the interaction between flow at the pore-scale and bacterial motility. The model reproduces the experimental observations, and predicts bacteria dispersion and transport at the macroscale.
△ Less
Submitted 23 May, 2022; v1 submitted 11 January, 2022;
originally announced January 2022.
-
Run-to-Tumble Variability Controls the Surface Residence Times of ${\it E.~coli}$ Bacteria
Authors:
Gaspard Junot,
Thierry Darnige,
Anke Lindner,
Vincent A. Martinez,
Jochen Arlt,
Angela Dawson,
Wilson C. K. Poon,
Harold Auradou,
Eric Clément
Abstract:
Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecede…
▽ More
Motile bacteria are known to accumulate at surfaces, eventually leading to changes in bacterial motility and bio-film formation. We use a novel two-colour, three-dimensional Lagrangian tracking technique, to follow simultaneously the body and the flagella of a wild-type ${\it Escherichia~coli}$. We observe long surface residence times and surface escape corresponding mostly to immediately antecedent tumbling. A motility model accounting for a large behavioural variability in run-time duration, reproduces all experimental findings and gives new insights into surface trap** efficiency.
△ Less
Submitted 21 June, 2022; v1 submitted 23 July, 2021;
originally announced July 2021.
-
HeCTOr: the $^3$He Cryogenic Target of Orsay for direct nuclear reactions with radioactive beams
Authors:
F. Galtarossa,
M. Pierens,
M. Assié,
V. Delpech,
F. Galet,
H. Saugnac,
D. Brugnara,
D. Ramos,
D. Beaumel,
P. Blache,
M. Chabot,
F. Chatelet,
E. Clément,
F. Flavigny,
A. Giret,
A. Gottardo,
J. Goupil,
A. Lemasson,
A. Matta,
L. Ménager,
E. Rindel
Abstract:
Direct nuclear reactions with radioactive ion beams represent an extremely powerful tool to extend the study of fundamental nuclear properties far from stability. These measurements require pure and dense targets to cope with the low beam intensities. The $^3$He cryogenic target HeCTOr has been designed to perform direct nuclear reactions in inverse kinematics. The high density of $^3$He scatterin…
▽ More
Direct nuclear reactions with radioactive ion beams represent an extremely powerful tool to extend the study of fundamental nuclear properties far from stability. These measurements require pure and dense targets to cope with the low beam intensities. The $^3$He cryogenic target HeCTOr has been designed to perform direct nuclear reactions in inverse kinematics. The high density of $^3$He scattering centers, of the order of 10$^{20}$ atoms/cm$^2$, makes it particularly suited for experiments where low-intensity radioactive beams are involved. The target was employed in a first in-beam experiment, where it was coupled to state-of-the-art gamma-ray and particle detectors. It showed excellent stability in gas temperature and density over time. Relevant experimental quantities, such as total target thickness, energy resolution and gamma-ray absorption, were determined through dedicated Geant4 simulations and found to be in good agreement with experimental data.
△ Less
Submitted 21 August, 2021; v1 submitted 12 May, 2021;
originally announced May 2021.
-
The MUGAST-AGATA-VAMOS campaign : set-up and performance
Authors:
M. Assié,
E. Clément,
A. Lemasson,
D. Ramos,
A. Raggio,
I. Zanon,
F. Galtarossa,
C. Lenain,
J. Casal,
F. Flavigny,
A. Matta,
D. Mengoni,
D. Beaumel,
Y. Blumenfeld,
R. Borcea,
D. Brugnara,
W. Catford,
F. de Oliveira,
N. De Séréville,
F. Didierjean,
C. Aa. Diget,
J. Dudouet,
B. Fernandez-Dominguez,
C. Fougères,
G. Frémont
, et al. (24 additional authors not shown)
Abstract:
The MUGAST-AGATA-VAMOS set-up at GANIL combines the MUGAST highly-segmented silicon array with the state-of-the-art AGATA array and the large acceptance VAMOS spectrometer. The mechanical and electronics integration copes with the constraints of maximum efficiency for each device, in particular γ-ray transparency for the silicon array. This complete set-up offers a unique opportunity to perform ex…
▽ More
The MUGAST-AGATA-VAMOS set-up at GANIL combines the MUGAST highly-segmented silicon array with the state-of-the-art AGATA array and the large acceptance VAMOS spectrometer. The mechanical and electronics integration copes with the constraints of maximum efficiency for each device, in particular γ-ray transparency for the silicon array. This complete set-up offers a unique opportunity to perform exclusive measurements of direct reactions with the radioactive beams from the SPIRAL1 facility. The performance of the set-up is described through its commissioning and two examples of transfer reactions measured during the campaign. High accuracy spectroscopy of the nuclei of interest, including cross-sections and angular distributions, is achieved through the triple-coincidence measurement. In addition, the correction from Doppler effect of the γ-ray energies is improved by the detection of the light particles and the use of two-body kinematics and a full rejection of the background contributions is obtained through the identification of heavy residues. Moreover, the system can handle high intensity beams (up to 108 pps). The particle identification based on the measurement of the time-of-flight between MUGAST and VAMOS and the reconstruction of the trajectories is investigated.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
Single-Trajectory Characterization of Active Swimmers in a Flow
Authors:
Gaspard Junot,
Eric Clément,
Harold Auradou,
Reinaldo García-García
Abstract:
We develop a maximum likelihood method to infer relevant physical properties of elongated active particles. Using individual trajectories of advected swimmers as input, we are able to accurately determine their rotational diffusion coefficients and an effective measure of their aspect ratio, also providing reliable estimators for the uncertainties of such quantities. We validate our theoretical co…
▽ More
We develop a maximum likelihood method to infer relevant physical properties of elongated active particles. Using individual trajectories of advected swimmers as input, we are able to accurately determine their rotational diffusion coefficients and an effective measure of their aspect ratio, also providing reliable estimators for the uncertainties of such quantities. We validate our theoretical construction using numerically generated active trajectories upon no-flow, simple shear, and Poiseuille flow, with excellent results. Being designed to rely on single-particle data, our method eases applications in experimental conditions where swimmers exhibit a strong morphological diversity. We briefly discuss some of such ongoing experimental applications, specifically, in the characterization of swimming E.coli in a flow.
△ Less
Submitted 8 March, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
Performance of The Advanced GAmma Tracking Array at GANIL
Authors:
J. Ljungvall,
R. M. Pérez-Vidal,
A. Lopez-Martens,
C. Michelagnoli,
E. Clément,
J. Dudouet,
A. Gadea,
H. Hess,
A. Korichi,
M. Labiche,
N. Lalović,
H. J. Li,
F. Recchia
Abstract:
The performance of the Advanced GAmma Tracking Array (AGATA) at GANIL is discussed, on the basis of the analysis of source and in-beam data taken with up to 30 segmented crystals. Data processing is described in detail. The performance of individual detectors are shown. The efficiency of the individual detectors as well as the efficiency after $γ$-ray tracking are discussed. Recent developments of…
▽ More
The performance of the Advanced GAmma Tracking Array (AGATA) at GANIL is discussed, on the basis of the analysis of source and in-beam data taken with up to 30 segmented crystals. Data processing is described in detail. The performance of individual detectors are shown. The efficiency of the individual detectors as well as the efficiency after $γ$-ray tracking are discussed. Recent developments of $γ$-ray tracking are also presented. The experimentally achieved peak-to-total is compared with simulations showing the impact of back-scattered $γ$ rays on the peak-to-total in a $γ$-ray tracking array. An estimate of the achieved position resolution using the Doppler broadening of in-beam data is also given.
Angular correlations from source measurements are shown together with different methods to take into account the effects of $γ$-ray tracking on the normalization of the angular correlations.
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
Chirality-induced bacterial rheotaxis in bulk shear flows
Authors:
Guangyin **g,
Andreas Zöttl,
Éric Clément,
Anke Lindner
Abstract:
Interaction of swimming bacteria with flows controls their ability to explore complex environments, crucial to many societal and environmental challenges and relevant for microfluidic applications as cell sorting. Combining experimental, numerical and theoretical analysis, we present a comprehensive study of the transport of motile bacteria in shear flows. Experimentally, we obtain with high accur…
▽ More
Interaction of swimming bacteria with flows controls their ability to explore complex environments, crucial to many societal and environmental challenges and relevant for microfluidic applications as cell sorting. Combining experimental, numerical and theoretical analysis, we present a comprehensive study of the transport of motile bacteria in shear flows. Experimentally, we obtain with high accuracy and for a large range of flow rates, the spatially resolved velocity and orientation distributions. They are in excellent agreement with the simulations of a kinematic model accounting for stochastic and microhydrodynamic properties and in particular the flagella chirality. Theoretical analysis reveals the scaling laws behind the average rheotactic velocity at moderate shear rates using a chirality parameter and explains the reorientation dynamics leading to a saturation at large shear rates from the marginal stability of a fixed point. Our findings constitute a full understanding of the physical mechanisms and relevant parameters of bacteria bulk rheotaxis.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
"Thermal Spike" model applied to thin targets irradiated with swift heavy ion beams at few MeV/u
Authors:
Christelle Stodel,
Marcel Toulemonde,
Christoph Fransen,
Bertrand Jacquot,
Emmanuel Clément,
Christian Dufour
Abstract:
High electronic excitations in radiation of metallic targets with swift heavy ion beams at the coulomb barrier play a dominant role in the damaging processes of some metals. The inelastic thermal spike model was developed to describe tracks in materials and is applied in this paper to some systems beams/targets employed recently in some nuclear physics experiments. Taking into account the experime…
▽ More
High electronic excitations in radiation of metallic targets with swift heavy ion beams at the coulomb barrier play a dominant role in the damaging processes of some metals. The inelastic thermal spike model was developed to describe tracks in materials and is applied in this paper to some systems beams/targets employed recently in some nuclear physics experiments. Taking into account the experimental conditions and the approved electron-phonon coupling factors, the results of the calculation enable to interpret the observation of the fast deformation of some targets.
△ Less
Submitted 22 November, 2019;
originally announced November 2019.
-
FPGA-based tracking for the CMS Level-1 trigger using the tracklet algorithm
Authors:
E. Bartz,
G. Boudoul,
R. Bucci,
J. Chaves,
E. Clement,
D. Cranshaw,
S. Dutta,
Y. Gershtein,
R. Glein,
K. Hahn,
E. Halkiadakis,
M. Hildreth,
S. Kyriacou,
K. Lannon,
A. Lefeld,
Y. Liu,
E. MacDonald,
N. Pozzobon,
A. Ryd,
K. Salyer,
P. Shields,
L. Skinnari,
K. Stenson,
R. Stone,
C. Strohman
, et al. (9 additional authors not shown)
Abstract:
The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware-based trigger system. There are many cha…
▽ More
The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware-based trigger system. There are many challenges involved in achieving this: a large input data rate of about 20--40 Tb/s; processing a new batch of input data every 25 ns, each consisting of about 15,000 precise position measurements and rough transverse momentum measurements of particles ("stubs''); performing the pattern recognition on these stubs to find the trajectories; and producing the list of trajectory parameters within 4 $μ\,$s. This paper describes a proposed solution to this problem, specifically, it presents a novel approach to pattern recognition and charged particle trajectory reconstruction using an all-FPGA solution. The results of an end-to-end demonstrator system, based on Xilinx Virtex-7 FPGAs, that meets timing and performance requirements are presented along with a further improved, optimized version of the algorithm together with its corresponding expected performance.
△ Less
Submitted 6 July, 2020; v1 submitted 22 October, 2019;
originally announced October 2019.
-
E. coli "super-contaminates" narrow ducts fostered by broad run-time distribution
Authors:
Nuris Figueroa-Morales,
Aramis Rivera,
Rodrigo Soto,
Anke Lindner,
Ernesto Altshuler,
Eric Clement
Abstract:
One striking feature of bacterial motion is their ability to swim upstream along corners and crevices, by leveraging hydrodynamic interactions. This motion through anatomic ducts or medical devices might be at the origin of serious infections. However, it remains unclear how bacteria can maintain persistent upstream motion while exhibiting run-and-tumble dynamics. Here we demonstrate that E. coli…
▽ More
One striking feature of bacterial motion is their ability to swim upstream along corners and crevices, by leveraging hydrodynamic interactions. This motion through anatomic ducts or medical devices might be at the origin of serious infections. However, it remains unclear how bacteria can maintain persistent upstream motion while exhibiting run-and-tumble dynamics. Here we demonstrate that E. coli can travel upstream in microfluidic devices over distances of 15 millimeters in times as short as 15 minutes. Using a stochastic model relating the run times to the time bacteria spend on surfaces, we quantitatively reproduce the evolution of the contamination profiles when considering a broad distribution of run times. Interestingly, the experimental data cannot be reproduced using the usually accepted exponential distribution of run times. Our study demonstrates that the run-and-tumble statistics determine macroscopic bacterial transport properties. This effect, that we name "super-contamination", could explain the fast onset of some life-threatening medical emergencies.
△ Less
Submitted 4 April, 2019;
originally announced April 2019.
-
Swimming bacteria in Poiseuille flow: the quest for active Bretherton-Jeffery trajectories
Authors:
Gaspard Junot,
Nuris Figueroa-Morales,
Thierry Darnige,
Anke Lindner,
Rodrigo Soto,
Harold Auradou,
Eric Clément
Abstract:
Using a 3D Lagrangian tracking technique, we determine experimentally the trajectories of non-tumbling E. coli mutants swimming in a Poiseuille flow. We identify a typology of trajectories in agreement with a kinematic "active Bretherton-Jeffery" model, featuring an axi-symmetric self-propelled ellipsoid. In particular, we recover the "swinging" and "shear tumbling" kinematics predicted theoretica…
▽ More
Using a 3D Lagrangian tracking technique, we determine experimentally the trajectories of non-tumbling E. coli mutants swimming in a Poiseuille flow. We identify a typology of trajectories in agreement with a kinematic "active Bretherton-Jeffery" model, featuring an axi-symmetric self-propelled ellipsoid. In particular, we recover the "swinging" and "shear tumbling" kinematics predicted theoretically by Zöttl et al. Moreover using this model, we derive analytically new features such as quasi-planar piece-wise trajectories, associated with the high aspect ratio of the bacteria, as well as the existence of a drift angle around which bacteria perform closed cyclic trajectories. However, the agreement between the model predictions and the experimental results remains local in time, due to the presence of Brownian rotational noise.
△ Less
Submitted 29 May, 2019; v1 submitted 7 March, 2019;
originally announced March 2019.
-
A High-performance Track Fitter for Use in Ultra-fast Electronics
Authors:
E. Clement,
M. De Mattia,
S. Dutta,
R. Eusebi,
K. Hahn,
Z. Hu,
S. **dariani,
J. Konigsberg,
T. Liu,
J. Low,
R. Patel,
D. Rathjens,
L. Ristori,
L. Skinnari,
M. Trovato,
K. A. Ulmer,
S. Viret
Abstract:
This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments. Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. This transformation results in f…
▽ More
This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments. Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. This transformation results in fitted track parameters with a very linear dependence on the hit positions. The approach is demonstrated in a representative detector geometry based on the CMS detector at the Large Hadron Collider. The fit is implemented in FPGA chips and optimized for track fitting throughput and obtains excellent track parameter performance. Such an algorithm is potentially useful in any high-speed track-fitting application.
△ Less
Submitted 5 September, 2018;
originally announced September 2018.
-
Oscillatory surface rheotaxis of swimming E. coli bacteria
Authors:
Arnold Mathijssen,
Nuris Figueroa-Morales,
Gaspard Junot,
Eric Clement,
Anke Lindner,
Andreas Zöttl
Abstract:
Bacterial contamination of biological conducts, catheters or water resources is a major threat to public health and can be amplified by the ability of bacteria to swim upstream. The mechanisms of this rheotaxis, the reorientation with respect to flow gradients, often in complex and confined environments, are still poorly understood. Here, we follow individual E. coli bacteria swimming at surfaces…
▽ More
Bacterial contamination of biological conducts, catheters or water resources is a major threat to public health and can be amplified by the ability of bacteria to swim upstream. The mechanisms of this rheotaxis, the reorientation with respect to flow gradients, often in complex and confined environments, are still poorly understood. Here, we follow individual E. coli bacteria swimming at surfaces under shear flow with two complementary experimental assays, based on 3D Lagrangian tracking and fluorescent flagellar labelling and we develop a theoretical model for their rheotactic motion. Three transitions are identified with increasing shear rate: Above a first critical shear rate, bacteria shift to swimming upstream. After a second threshold, we report the discovery of an oscillatory rheotaxis. Beyond a third transition, we further observe coexistence of rheotaxis along the positive and negative vorticity directions. A full theoretical analysis explains these regimes and predicts the corresponding critical shear rates. The predicted transitions as well as the oscillation dynamics are in good agreement with experimental observations. Our results shed new light on bacterial transport and reveal new strategies for contamination prevention.
△ Less
Submitted 18 November, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
3D spatial exploration by E. coli echoes motor temporal variability
Authors:
Nuris Figueroa-Morales,
Rodrigo Soto,
Gaspard Junot,
Thierry Darnige,
Carine Douarche,
Vincent Martinez,
Anke Lindner,
Eric Clément
Abstract:
Unraveling bacterial strategies for spatial exploration is crucial for understanding the complexity in the organization of life. Bacterial motility determines the spatio-temporal structure of microbial communities, controls infection spreading and the microbiota organization in guts or in soils. Most theoretical approaches for modeling bacterial transport rely on their run-and-tumble motion. For E…
▽ More
Unraveling bacterial strategies for spatial exploration is crucial for understanding the complexity in the organization of life. Bacterial motility determines the spatio-temporal structure of microbial communities, controls infection spreading and the microbiota organization in guts or in soils. Most theoretical approaches for modeling bacterial transport rely on their run-and-tumble motion. For Escherichia coli, the run time distribution was reported to follow a Poisson process with a single characteristic time related to the rotational switching of the flagellar motors. However, direct measurements on flagellar motors show heavy-tailed distributions of rotation times stemming from the intrinsic noise in the chemotactic mechanism. Currently, there is no direct experimental evidence that the stochasticity in the chemotactic machinery affect the macroscopic motility of bacteria. In stark contrast with the accepted vision of run-and-tumble, here we report a large behavioral variability of wild-type \emph{E. coli}, revealed in their three-dimensional trajectories. At short observation times, a large distribution of run times is measured on a population and attributed to the slow fluctuations of a signaling protein triggering the flagellar motor reversal. Over long times, individual bacteria undergo significant changes in motility. We demonstrate that such a large distribution of run times introduces measurement biases in most practical situations. Our results reconcile the notorious conundrum between run time observations and motor switching statistics. We finally propose that statistical modeling of transport properties currently undertaken in the emerging framework of active matter studies, should be reconsidered under the scope of this large variability of motility features.
△ Less
Submitted 13 November, 2019; v1 submitted 3 March, 2018;
originally announced March 2018.
-
Effect of motility on the transport of bacteria populations through a porous medium
Authors:
Adama Creppy,
Eric Clément,
Carine Douarche,
Maria Veronica D'Angelo,
Harold Auradou
Abstract:
The role of activity on the hydrodynamic dispersion of bacteria in a model porous medium is studied by tracking thousands of bacteria in a microfluidic chip containing randomly placed pillars. We first evaluate the spreading dynamics of two populations of motile and non-motile bacteria injected at different flow rates. In both cases, we observe that the mean and the variance of the distances cover…
▽ More
The role of activity on the hydrodynamic dispersion of bacteria in a model porous medium is studied by tracking thousands of bacteria in a microfluidic chip containing randomly placed pillars. We first evaluate the spreading dynamics of two populations of motile and non-motile bacteria injected at different flow rates. In both cases, we observe that the mean and the variance of the distances covered by the bacteria vary linearly with time and flow velocity, a result qualitatively consistent with the standard geometric dispersion picture. However, quantitatively, the motiles bacteria display a systematic retardation effect when compared to the non-motile ones. Furthermore, the shape of the traveled distance distribution in the flow direction differs significantly for both the motile and the non-motile strain, hence probing a markedly different exploration process. For the non-motile bacteria, the distribution is Gaussian whereas for the motile ones, the distribution displays a positive skewness and spreads exponentially downstream akin to a Gamma distribution. The detailed microscopic study of the trajectories reveals two salient effects characterizing the exploration process of motile bacteria : (i) The emergence of an "active" retention effect due to an extended exploration of the pore surfaces, (ii) an enhanced spreading at the forefront due to the transport of bacteria along "fast-tracks" where they acquire a velocity larger than the local flow velocity. We finally discuss the practical applications of these effects on the large-scale macroscopic transfer and contamination processes caused by microbes in natural environments.
△ Less
Submitted 6 September, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.
-
Actuated rheology of magnetic micro-swimmers suspensions : emergence of motor and brake states
Authors:
Benoit Vincenti,
Carine Douarche,
Eric Clément
Abstract:
We study the effect of magnetic field on the rheology of magnetic micro-swimmers suspensions. We use a model of a dilute suspension under simple shear and subjected to a constant magnetic field. Particle shear stress is obtained for both pusher and puller types of micro-swimmers. In the limit of low shear rate, the rheology exhibits a constant shear stress, called actuated stress, which only depen…
▽ More
We study the effect of magnetic field on the rheology of magnetic micro-swimmers suspensions. We use a model of a dilute suspension under simple shear and subjected to a constant magnetic field. Particle shear stress is obtained for both pusher and puller types of micro-swimmers. In the limit of low shear rate, the rheology exhibits a constant shear stress, called actuated stress, which only depends on the swimming activity of the particles. This stress is induced by the magnetic field and can be positive (brake state) or negative (motor state). In the limit of low magnetic fields, a scaling relation of the motor-brake effect is derived as a function of the dimensionless parameters of the model. In this case, the shear stress is an affine function of the shear rate. The possibilities offered by such an active system to control the rheological response of a uid are finally discussed.
△ Less
Submitted 19 March, 2018; v1 submitted 5 October, 2017;
originally announced October 2017.
-
Lagrangian 3D tracking of fluorescent microscopic objects in motion
Authors:
T. Darnige,
N. Figueroa-Morales,
P. Bohec,
A. Lindner,
E. Clément
Abstract:
We describe the development of a tracking device, mounted on an epi-fluorescent inverted microscope, suited to obtain time resolved 3D Lagrangian tracks of fluorescent passive or active micro-objects in micro-fluidic devices. The system is based on real-time image processing, determining the displacement of a x,y mechanical stage to keep the chosen object at a fixed position in the observation fra…
▽ More
We describe the development of a tracking device, mounted on an epi-fluorescent inverted microscope, suited to obtain time resolved 3D Lagrangian tracks of fluorescent passive or active micro-objects in micro-fluidic devices. The system is based on real-time image processing, determining the displacement of a x,y mechanical stage to keep the chosen object at a fixed position in the observation frame. The z displacement is based on the refocusing of the fluorescent object determining the displacement of a piezo mover kee** the moving object in focus. Track coordinates of the object with respect to the micro-fluidic device, as well as images of the object are obtained at a frequency of several tenths of Hertz. This device is particularly well adapted to obtain trajectories of motile micro-organisms in micro-fluidic devices with or without flow.
△ Less
Submitted 10 March, 2017; v1 submitted 15 November, 2016;
originally announced November 2016.
-
Turning bacteria suspensions into a "superfluid"
Authors:
Héctor Matías López,
Jérémie Gachelin,
Carine Douarche,
Harold Auradou,
Eric Clément
Abstract:
The rheological response under simple shear of an active suspension of Escherichia coli is determined in a large range of shear rates and concentrations. The effective viscosity and the time scales characterizing the bacterial organization under shear are obtained. In the dilute regime, we bring evidences for a low shear Newtonian plateau characterized by a shear viscosity decreasing with concentr…
▽ More
The rheological response under simple shear of an active suspension of Escherichia coli is determined in a large range of shear rates and concentrations. The effective viscosity and the time scales characterizing the bacterial organization under shear are obtained. In the dilute regime, we bring evidences for a low shear Newtonian plateau characterized by a shear viscosity decreasing with concentration. In the semi-dilute regime, for particularly active bacteria, the suspension display a "super-fluid" like transition where the viscous resistance to shear vanishes, thus showing that macroscopically, the activity of pusher swimmers organized by shear, is able to fully overcome the dissipative effects due to viscous loss.
△ Less
Submitted 18 March, 2015;
originally announced March 2015.
-
Induced Diffusion of Tracers in a Bacterial Suspension: Theory and Experiments
Authors:
G. L. Miño,
J. Dunstan,
A. Rousselet,
E. Clement,
R. Soto
Abstract:
The induced diffusion of tracers in a bacterial suspension is studied theoretically and experimentally at low bacterial concentrations. Considering the swimmer-tracer hydrodynamic interactions at low-Reynolds number and using a kinetic theory approach, it is shown that the induced diffusion coefficient is proportional to the swimmer concentration, their mean velocity and a coefficient $β$, as obse…
▽ More
The induced diffusion of tracers in a bacterial suspension is studied theoretically and experimentally at low bacterial concentrations. Considering the swimmer-tracer hydrodynamic interactions at low-Reynolds number and using a kinetic theory approach, it is shown that the induced diffusion coefficient is proportional to the swimmer concentration, their mean velocity and a coefficient $β$, as observed experimentally. The coefficient $β$ scales as the tracer-swimmer cross section times the mean square displacement produced by single scatterings. The displacements depend on the swimmer propulsion forces. Considering simple swimmer models (acting on the fluid as two monopoles or as a force dipole) it is shown that $β$ increases for decreasing swimming efficiencies. Close to solid surfaces the swimming efficiency degrades and, consequently, the induced diffusion increase. Experiments on W wild-type {\em Escherichia coli} in a Hele-Shaw cell under buoyant conditions are performed to measure the induced diffusion on tracers near surfaces. The modification of the suspension pH vary the swimmers' velocity in a wide range allowing to extract the $β$ coefficient with precision. It is found that the solid surfaces modify the induced diffusion: decreasing the confinement height of the cell, $β$ increases by a factor 4. The theoretical model reproduces this increase although there are quantitative differences, probably attributed to the simplicity of the swimmer models.
△ Less
Submitted 29 October, 2012;
originally announced October 2012.
-
AGATA - Advanced Gamma Tracking Array
Authors:
S. Akkoyun,
A. Algora,
B. Alikhani,
F. Ameil,
G. de Angelis,
L. Arnold,
A. Astier,
A. Ataç,
Y. Aubert,
C. Aufranc,
A. Austin,
S. Aydin,
F. Azaiez,
S. Badoer,
D. L. Balabanski,
D. Barrientos,
G. Baulieu,
R. Baumann,
D. Bazzacco,
F. A. Beck,
T. Beck,
P. Bednarczyk,
M. Bellato,
M. A. Bentley,
G. Benzoni
, et al. (329 additional authors not shown)
Abstract:
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the…
▽ More
The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer.
△ Less
Submitted 17 September, 2012; v1 submitted 24 November, 2011;
originally announced November 2011.
-
A two-sphere model for bacteria swimming near solid surfaces
Authors:
Jocelyn Dunstan,
Gastón Miño,
Eric Clement,
Rodrigo Soto
Abstract:
We present a simple model for bacteria like \emph{Escherichia coli} swimming near solid surfaces. It consists of two spheres of different radii connected by a dragless rod. The effect of the flagella is taken into account by imposing a force on the tail sphere and opposite torques exerted by the rod over the spheres. The hydrodynamic forces and torques on the spheres are computed by considering se…
▽ More
We present a simple model for bacteria like \emph{Escherichia coli} swimming near solid surfaces. It consists of two spheres of different radii connected by a dragless rod. The effect of the flagella is taken into account by imposing a force on the tail sphere and opposite torques exerted by the rod over the spheres. The hydrodynamic forces and torques on the spheres are computed by considering separately the interaction of a single sphere with the surface and with the flow produced by the other sphere. Numerically, we solve the linear system which contains the geometrical constraints and the force-free and torque-free conditions. The dynamics of this swimmer near a solid boundary is very rich, showing three different behaviors depending on the initial conditions: (1) swimming in circles in contact with the wall, (2) swimming in circles at a finite distance from the wall, and (3) swimming away from it. Furthermore, the order of magnitude of the radius of curvature for the circular motion is in the range $8-50\,μ$m, close to values observed experimentally.
△ Less
Submitted 8 November, 2011;
originally announced November 2011.
-
Enhanced diffusion due to active swimmers at a solid surface
Authors:
Gaston Miño,
Thomas E. Mallouk,
Thierry Darnige,
Mauricio Hoyos,
Jeremy Dauchet,
Jocelyn Dunstan,
Rodrigo Soto,
Yang Wang,
Annie Rousselet,
Eric Clement
Abstract:
We consider two systems of active swimmers moving close to a solid surface, one being a living population of wild-type \textit{E. coli} and the other being an assembly of self-propelled Au-Pt rods. In both situations, we have identified two different types of motion at the surface and evaluated the fraction of the population that displayed ballistic trajectories (active swimmers) with respect to t…
▽ More
We consider two systems of active swimmers moving close to a solid surface, one being a living population of wild-type \textit{E. coli} and the other being an assembly of self-propelled Au-Pt rods. In both situations, we have identified two different types of motion at the surface and evaluated the fraction of the population that displayed ballistic trajectories (active swimmers) with respect to those showing random-like behavior. We studied the effect of this complex swimming activity on the diffusivity of passive tracers also present at the surface. We found that the tracer diffusivity is enhanced with respect to standard Brownian motion and increases linearly with the activity of the fluid, defined as the product of the fraction of active swimmers and their mean velocity. This result can be understood in terms of series of elementary encounters between the active swimmers and the tracers.
△ Less
Submitted 21 December, 2010;
originally announced December 2010.
