-
Magnetoelectric Coupling in Pb(Zr,Ti)O3/CoFeB Nanoscale Waveguides Studied by Propagating Spin-Wave Spectroscopy
Authors:
Daniele Narducci,
Xiangyu Wu,
Isabella Boventer,
Jo De Boeck,
Abdelmadjid Anane,
Paolo Bortolotti,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
This study introduces a method for the characterization of the magnetoelectric coupling in nanoscale Pb(Zr,Ti)O3/CoFeB thin film composites based on propagating spin-wave spectroscopy. Finite element simulations of the strain distribution in the devices indicated that the magnetoelastic effective field in the CoFeB waveguides was maximized in the Damon - Eshbach configuration. All-electrical broad…
▽ More
This study introduces a method for the characterization of the magnetoelectric coupling in nanoscale Pb(Zr,Ti)O3/CoFeB thin film composites based on propagating spin-wave spectroscopy. Finite element simulations of the strain distribution in the devices indicated that the magnetoelastic effective field in the CoFeB waveguides was maximized in the Damon - Eshbach configuration. All-electrical broadband propagating spin-wave transmission measurements were conducted on Pb(Zr,Ti)O3/CoFeB magnetoelectric waveguides with lateral dimensions down to 700 nm. The results demonstrated that the spin-wave resonance frequency can be modulated by applying a bias voltage to Pb(Zr,Ti)O3. The modulation is hysteretic due to the ferroelastic behavior of Pb(Zr,Ti)O3. An analytical model was then used to correlate the change in resonance frequency to the induced magnetoelastic field in the magnetostrictive CoFeB waveguide. We observe a hysteresis magnetoelastic field strength with values as large as 5.61 mT, and a non-linear magnetoelectric coupling coefficient with a maximum value of 1.69 mT/V.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
Microwave Properties of Ba-Substituted Pb(Zr$_{0.52}$Ti$_{0.48}$)O$_3$ after Chemical-Mechanical Polishing
Authors:
Federica Luciano,
Lieve Teugels,
Sean McMitchell,
Giacomo Talmelli,
Anaïs Guerenneur,
Renzo Stheins,
Rudy Caluwaerts,
Thierry Conard,
Inge Vaesen,
Stefanie Sergeant,
Pol Van Dorpe,
Stefan De Gendt,
Matthijn Dekkers,
Johan Swerts,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
We have studied the effect of chemical-mechanical polishing (CMP) on the ferroelectric, piezoelectric, and microwave dielectric properties of Ba-substituted PZT (BPZT), deposited by pulsed laser deposition. CMP allowed for the reduction of the root mean square surface roughness of 600 nm thick BPZT films from 12.1nm to 0.79 nm. Ammonium peroxide (SC-1) cleaning was effective to remove Si CMP resid…
▽ More
We have studied the effect of chemical-mechanical polishing (CMP) on the ferroelectric, piezoelectric, and microwave dielectric properties of Ba-substituted PZT (BPZT), deposited by pulsed laser deposition. CMP allowed for the reduction of the root mean square surface roughness of 600 nm thick BPZT films from 12.1nm to 0.79 nm. Ammonium peroxide (SC-1) cleaning was effective to remove Si CMP residuals. Measurements of the ferroelectric hysteresis after CMP indicated that the ferroelectric properties of BPZT were only weakly affected by CMP, while the piezoelectric d33 coefficient and the microwave permittivity were reduced slightly by 10%. This can be attributed to the formation of a thin dead layer at the BPZT surface. Moreover, the intrinsic dielectric permittivity at microwave frequencies between 1 and 25 GHz was not influenced by CMP, whereas the dead layer series capacitance decreased by 10%. The results indicate that the CMP process can be used to smoothen the BPZT surface without affecting the film properties strongly.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
Roadmap for Unconventional Computing with Nanotechnology
Authors:
Giovanni Finocchio,
Jean Anne C. Incorvia,
Joseph S. Friedman,
Qu Yang,
Anna Giordano,
Julie Grollier,
Hyunsoo Yang,
Florin Ciubotaru,
Andrii Chumak,
Azad J. Naeemi,
Sorin D. Cotofana,
Riccardo Tomasello,
Christos Panagopoulos,
Mario Carpentieri,
Peng Lin,
Gang Pan,
J. Joshua Yang,
Aida Todri-Sanial,
Gabriele Boschetto,
Kremena Makasheva,
Vinod K. Sangwan,
Amit Ranjan Trivedi,
Mark C. Hersam,
Kerem Y. Camsari,
Peter L. McMahon
, et al. (26 additional authors not shown)
Abstract:
In the "Beyond Moore's Law" era, with increasing edge intelligence, domain-specific computing embracing unconventional approaches will become increasingly prevalent. At the same time, adopting a variety of nanotechnologies will offer benefits in energy cost, computational speed, reduced footprint, cyber resilience, and processing power. The time is ripe for a roadmap for unconventional computing w…
▽ More
In the "Beyond Moore's Law" era, with increasing edge intelligence, domain-specific computing embracing unconventional approaches will become increasingly prevalent. At the same time, adopting a variety of nanotechnologies will offer benefits in energy cost, computational speed, reduced footprint, cyber resilience, and processing power. The time is ripe for a roadmap for unconventional computing with nanotechnologies to guide future research, and this collection aims to fill that need. The authors provide a comprehensive roadmap for neuromorphic computing using electron spins, memristive devices, two-dimensional nanomaterials, nanomagnets, and various dynamical systems. They also address other paradigms such as Ising machines, Bayesian inference engines, probabilistic computing with p-bits, processing in memory, quantum memories and algorithms, computing with skyrmions and spin waves, and brain-inspired computing for incremental learning and problem-solving in severely resource-constrained environments. These approaches have advantages over traditional Boolean computing based on von Neumann architecture. As the computational requirements for artificial intelligence grow 50 times faster than Moore's Law for electronics, more unconventional approaches to computing and signal processing will appear on the horizon, and this roadmap will help identify future needs and challenges. In a very fertile field, experts in the field aim to present some of the dominant and most promising technologies for unconventional computing that will be around for some time to come. Within a holistic approach, the goal is to provide pathways for solidifying the field and guiding future impactful discoveries.
△ Less
Submitted 27 February, 2024; v1 submitted 17 January, 2023;
originally announced January 2023.
-
Perspectives and Challenges of Scaled Boolean Spintronic Circuits Based on Magnetic Tunnel Junction Transducers
Authors:
F. Meng,
S. -Y. Lee,
O. Zografos,
M. Gupta,
V. D. Nguyen,
G. De Micheli,
S. Cotofana,
I. Asselberghs,
C. Adelmann,
G. Sankar Kar,
S. Couet,
F. Ciubotaru
Abstract:
This paper addresses the question: Can spintronic circuits based on Magnetic Tunnel Junction (MTJ) transducers outperform their state-of-the-art CMOS counterparts? To this end, we use the EPFL combinational benchmark sets, synthesize them in 7 nm CMOS and in MTJ-based spintronic technologies, and compare the two implementation methods in terms of Energy-Delay-Product (EDP). To fully utilize the te…
▽ More
This paper addresses the question: Can spintronic circuits based on Magnetic Tunnel Junction (MTJ) transducers outperform their state-of-the-art CMOS counterparts? To this end, we use the EPFL combinational benchmark sets, synthesize them in 7 nm CMOS and in MTJ-based spintronic technologies, and compare the two implementation methods in terms of Energy-Delay-Product (EDP). To fully utilize the technologies potential, CMOS and spintronic implementations are built upon standard Boolean and Majority Gates, respectively. For the spintronic circuits, we assumed that domain conversion (electric/magnetic to magnetic/electric) is performed by means of MTJs and the computation is accomplished by domain wall based majority gates, and considered two EDP estimation scenarios: (i) Uniform Benchmarking, which ignores the circuit's internal structure and only includes domain transducers power and delay contributions into the calculations, and (ii) Majority-Inverter-Graph Benchmarking, which also embeds the circuit structure, the associated critical path delay and energy consumption by DW propagation. Our results indicate that for the uniform case, the spintronic route is better suited for the implementation of complex circuits with few inputs and outputs. On the other hand, when the circuit structure is also considered via majority and inverter synthesis, our analysis clearly indicates that in order to match and eventually outperform CMOS performance, MTJ efficiency has to be improved by 3-4 orders of magnitude. While it is clear that for the time being the MTJ-based-spintronic way cannot compete with CMOS, further transducer developments may tip the balance, which, when combined with information non-volatility, may make spintronic implementation for certain applications that require a large number of calculations and have a rather limited amount of interaction with the environment.
△ Less
Submitted 29 June, 2023; v1 submitted 5 September, 2022;
originally announced September 2022.
-
Power transfer in magnetoelectric resonators
Authors:
Frederic Vanderveken,
Bart Sorée,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
We derive an analytical model for the power transfer in a magnetoelectric film bulk acoustic resonator consisting of a piezoelectric--magnetostrictive bilayer. The model describes the dynamic magnetostrictive influence on the elastodynamics via an effective frequency-dependent stiffness constant. This allows for the calculation of both the magnetic and elastic power absorption in the resonator as…
▽ More
We derive an analytical model for the power transfer in a magnetoelectric film bulk acoustic resonator consisting of a piezoelectric--magnetostrictive bilayer. The model describes the dynamic magnetostrictive influence on the elastodynamics via an effective frequency-dependent stiffness constant. This allows for the calculation of both the magnetic and elastic power absorption in the resonator as well as of its energy efficiency when such a resonator is considered as a magnetic transducer. The model is then applied to example systems consisting of piezoelectric ScAlN and magnetostrictive CoFeB, Ni, or Terfenol-D layers.
△ Less
Submitted 12 July, 2022; v1 submitted 6 April, 2022;
originally announced April 2022.
-
Roadmap on Spin-Wave Computing
Authors:
A. V. Chumak,
P. Kabos,
M. Wu,
C. Abert,
C. Adelmann,
A. Adeyeye,
J. Åkerman,
F. G. Aliev,
A. Anane,
A. Awad,
C. H. Back,
A. Barman,
G. E. W. Bauer,
M. Becherer,
E. N. Beginin,
V. A. S. V. Bittencourt,
Y. M. Blanter,
P. Bortolotti,
I. Boventer,
D. A. Bozhko,
S. A. Bunyaev,
J. J. Carmiggelt,
R. R. Cheenikundil,
F. Ciubotaru,
S. Cotofana
, et al. (91 additional authors not shown)
Abstract:
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the…
▽ More
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the academic domain, the scientific and technological challenges of the field are being extensively investigated, and many proof-of-concept prototypes have already been realized in laboratories. This roadmap is a product of the collective work of many authors that covers versatile spin-wave computing approaches, conceptual building blocks, and underlying physical phenomena. In particular, the roadmap discusses the computation operations with Boolean digital data, unconventional approaches like neuromorphic computing, and the progress towards magnon-based quantum computing. The article is organized as a collection of sub-sections grouped into seven large thematic sections. Each sub-section is prepared by one or a group of authors and concludes with a brief description of the current challenges and the outlook of the further development of the research directions.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Spin Wave Based Approximate 4:2 Compressor
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Said Hamdioui,
Sorin Cotofana
Abstract:
In this paper, we propose an energy efficient SW based approximate 4:2 compressor comprising a 3-input and a 5-input Majority gate. We validate our proposal by means of micromagnetic simulations, and assess and compare its performance with one of the state-of-the-art SW, 45nm CMOS, and Spin-CMOS counterparts. The evaluation results indicate that the proposed compressor consumes 31.5\% less energy…
▽ More
In this paper, we propose an energy efficient SW based approximate 4:2 compressor comprising a 3-input and a 5-input Majority gate. We validate our proposal by means of micromagnetic simulations, and assess and compare its performance with one of the state-of-the-art SW, 45nm CMOS, and Spin-CMOS counterparts. The evaluation results indicate that the proposed compressor consumes 31.5\% less energy in comparison with its accurate SW design version. Furthermore, it has the same energy consumption and error rate as the approximate compressor with Directional Coupler (DC), but it exhibits 3x lower delay. In addition, it consumes 14% less energy, while having 17% lower average error rate than the approximate 45nm CMOS counterpart. When compared with the other emerging technologies, the proposed compressor outperforms approximate Spin-CMOS based compressor by 3 orders of magnitude in term of energy consumption while providing the same error rate. Finally, the proposed compressor requires the smallest chip real-estate measured in terms of devices.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
Spin Wave Based 4-2 Compressor
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Sorin Cotofana,
Said Hamdioui
Abstract:
By their very nature, Spin Waves (SWs) consume ultra-low amounts of energy, which makes them suitable for ultra-low energy consumption applications. In addition, a compressor can be utilized to further reduce the energy consumption and enhance the speed of a multiplier. Therefore, we propose a novel energy efficient SW based 4-2 compressor consisting of 4 XOR gates and 2 Majority gates. The propos…
▽ More
By their very nature, Spin Waves (SWs) consume ultra-low amounts of energy, which makes them suitable for ultra-low energy consumption applications. In addition, a compressor can be utilized to further reduce the energy consumption and enhance the speed of a multiplier. Therefore, we propose a novel energy efficient SW based 4-2 compressor consisting of 4 XOR gates and 2 Majority gates. The proposed compressor is validated by means of micromagnetic simulations and compared with the state-of-the-art SW, 22nm CMOS, Magnetic Tunnel Junction (MTJ), Domain Wall Motion (DWM), and Spin-CMOS technologies. The performance evaluation shows that the proposed compressor consumes 2.5x less and 1.25x less energy than the 22nm CMOS and the conventional SW compressor, respectively, whereas it consumes at least 3 orders of magnitude less energy than the MTJ, DWM, and Spin-CMOS designs. Furthermore, the compressor achieves the smallest chip real-estate. In summary, the performance evaluation of our proposed compressor shows that the SW technology has the potential to progress the state-of-the-art circuit design in terms of energy consumption and scalability.
△ Less
Submitted 20 September, 2021;
originally announced September 2021.
-
n-bit Data Parallel Spin Wave Logic Gate
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Sorin Cotofana,
Said Hamdioui
Abstract:
Due to their very nature, Spin Waves (SWs) created in the same waveguide, but with different frequencies, can coexist while selectively interacting with their own species only. The absence of inter-frequency interferences isolates input data sets encoded in SWs with different frequencies and creates the premises for simultaneous data parallel SW based processing without hardware replication or del…
▽ More
Due to their very nature, Spin Waves (SWs) created in the same waveguide, but with different frequencies, can coexist while selectively interacting with their own species only. The absence of inter-frequency interferences isolates input data sets encoded in SWs with different frequencies and creates the premises for simultaneous data parallel SW based processing without hardware replication or delay overhead. In this paper we leverage this SW property by introducing a novel computation paradigm, which allows for the parallel processing of n-bit input data vectors on the same basic SW based logic gate. Subsequently, to demonstrate the proposed concept, we present 8-bit parallel 3-input Majority gate implementation and validate it by means of Object Oriented MicroMagnetic Framework (OOMMF) simulations. To evaluate the potential benefit of our proposal we compare the 8-bit data parallel gate with equivalent scalar SW gate based implementation. Our evaluation indicates that 8-bit data 3-input Majority gate implementation requires 4.16x less area than the scalar SW gate based equivalent counterpart while preserving the same delay and energy consumption figures.
△ Less
Submitted 11 September, 2021;
originally announced September 2021.
-
2-output spin wave programmable logic gate
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Sorin Cotofana,
Said Hamdioui
Abstract:
This paper presents a 2-output Spin-Wave Programmable Logic Gate structure able to simultaneously evaluate any pair of AND, NAND, OR, NOR, XOR, and XNOR Boolean functions. Our proposal provides the means for fanout achievement within the Spin Wave computation domain and energy and area savings as two different functions can be simultaneously evaluated on the same input data. We validate our propos…
▽ More
This paper presents a 2-output Spin-Wave Programmable Logic Gate structure able to simultaneously evaluate any pair of AND, NAND, OR, NOR, XOR, and XNOR Boolean functions. Our proposal provides the means for fanout achievement within the Spin Wave computation domain and energy and area savings as two different functions can be simultaneously evaluated on the same input data. We validate our proposal by means of Object Oriented Micromagnetic Framework (OOMMF) simulations and demonstrate that by phase and magnetization threshold output sensing AND, OR, NAND, NOR and XOR and XNOR functionalities can be achieved, respectively. To get inside into the potential practical implications of our approach we use the proposed gate to implement a 3-input Majority gate, which we evaluate and compare with state of the art equivalent implementations in terms of area, delay, and energy consumptions. Our estimations indicate that the proposed gate provides 33% and 16% energy and area reduction, respectively, when compared with spin-wave counterpart and 42% energy reduction while consuming 12x less area when compared to a 15 nm CMOS implementation.
△ Less
Submitted 11 September, 2021;
originally announced September 2021.
-
Fan-out enabled spin wave majority gate
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Said Hamdioui,
Sorin Cotofana
Abstract:
By its very nature, Spin Wave (SW) interference provides intrinsic support for Majority logic function evaluation. Due to this and the fact that the $3$-input Majority (MAJ3) gate and the Inverter constitute a universal Boolean logic gate set, different MAJ3 gate implementations have been proposed. However, they cannot be directly utilized for the construction of larger SW logic circuits as they l…
▽ More
By its very nature, Spin Wave (SW) interference provides intrinsic support for Majority logic function evaluation. Due to this and the fact that the $3$-input Majority (MAJ3) gate and the Inverter constitute a universal Boolean logic gate set, different MAJ3 gate implementations have been proposed. However, they cannot be directly utilized for the construction of larger SW logic circuits as they lack a key cascading mechanism, i.e., fan-out capability. In this paper, we introduce a novel ladder-shaped SW MAJ3 gate design able to provide a maximum fan-out of 2 (FO2). The proper gate functionality is validated by means of micromagnetic simulations, which also demonstrate that the amplitude mismatch between the two outputs is negligible proving that an FO2 is properly achieved. Additionally, we evaluate the gate area and compare it with SW state-of-the-art and 15nm CMOS counterparts working under the same conditions. Our results indicate that the proposed structure requires 12x less area than the 15 nm CMOS MAJ3 gate and that at the gate level the fan-out capability results in 16% area savings, when compared with the state-of-the-art SW majority gate counterparts.
△ Less
Submitted 11 September, 2021;
originally announced September 2021.
-
Measuring the dispersion relations of spin wave bands using time-of-flight spectroscopy
Authors:
T. Devolder,
G. Talmelli,
S. M. Ngom,
F. Ciubotaru,
C. Adelmann,
C. Chappert
Abstract:
We develop a generic all-inductive procedure to measure the band structure of spin waves in a magnetic thin stripe. In contrast to existing techniques, our method works even if several spin wave branches coexist in the investigated frequency interval, provided that the branches possess sufficiently different group velocities. We first measure the microwave scattering matrix of a network composed o…
▽ More
We develop a generic all-inductive procedure to measure the band structure of spin waves in a magnetic thin stripe. In contrast to existing techniques, our method works even if several spin wave branches coexist in the investigated frequency interval, provided that the branches possess sufficiently different group velocities. We first measure the microwave scattering matrix of a network composed of distant antennas inductively coupled to the spin wave bath of the magnetic film. After a mathematical transformation to the time-domain to get the transmission impulse response, the different spin wave branches are viewed as wavepackets that reach successively the receiving antenna after different travel times. In analogy with time-of flight spectroscopy, the wavepackets are then separated by time-gating. The time-gated responses are used to recalculate the contribution of each spin wave branch to the frequency domain scattering matrix. The dispersion relation of each branch stems from the absolute phase of the time-gated transmission parameter. The spin wave wavevector can be determined unambiguously if the results for several propagation distances are combined, so as to get the dispersion relations.
△ Less
Submitted 3 June, 2021; v1 submitted 9 April, 2021;
originally announced April 2021.
-
Spin Wave Based Approximate Computing
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Said Hamdioui,
Sorin Cotofana
Abstract:
Spin Waves(SWs) enable the realization of energy efficient circuits as they propagate and interfere within waveguides without consuming noticeable energy. However, SW computing can be even more energy efficient by taking advantage of the approximate computing paradigm as many applications are error-tolerant like multimedia and social media. In this paper we propose an ultra-low energy novel Approx…
▽ More
Spin Waves(SWs) enable the realization of energy efficient circuits as they propagate and interfere within waveguides without consuming noticeable energy. However, SW computing can be even more energy efficient by taking advantage of the approximate computing paradigm as many applications are error-tolerant like multimedia and social media. In this paper we propose an ultra-low energy novel Approximate Full Adder(AFA) and a 2-bit inputs Multiplier(AMUL). We validate the correct functionality of our proposal by means of micromagnetic simulations and evaluate the approximate FA figure of merit against state-of-the-art accurate SW, 7nmCMOS, Spin Hall Effect(SHE), Domain Wall Motion(DWM), accurate and approximate 45nmCMOS, Magnetic Tunnel Junction(MTJ), and Spin-CMOS FA implementations. Our results indicate that AFA consumes 43% and 33% less energy than state-of-the-art accurate SW and 7nmCMOS FA, respectively, and saves 69% and 44% when compared with accurate and approximate 45nm CMOS, respectively, and provides a 2 orders of magnitude energy reduction when compared with accurate SHE, accurate and approximate DWM, MTJ, and Spin-CMOS, counterparts. In addition, it achieves the same error rate as approximate 45nmCMOS and Spin-CMOS FA whereas it exhibits 50% less error rate than the approximate DWM FA. Furthermore, it outperforms its contenders in terms of area by saving at least 29% chip real-estate. AMUL is evaluated and compared with state-of-the-art accurate SW and 16nm CMOS accurate and approximate state-of-the-art designs. The evaluation results indicate that it saves at least 2x and 5x energy in comparison with the state-of-the-art SW designs and 16nm CMOS accurate and approximate designs, respectively, and has an average error rate of 10%, while the approximate CMOS MUL has an average error rate of 13%, and requires at least 64% less chip real-estate.
△ Less
Submitted 21 June, 2021; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Achieving Wave Pipelining in Spin Wave Technology
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Said Hamdioui,
Sorin Cotofana
Abstract:
By their very nature, voltage/current excited Spin Waves (SWs) propagate through waveguides without consuming noticeable power. If SW excitation is performed by the continuous application of voltages/currents to the input, which is usually the case, the overall energy consumption is determined by the transducer power and the circuit critical path delay, which leads to high energy consumption becau…
▽ More
By their very nature, voltage/current excited Spin Waves (SWs) propagate through waveguides without consuming noticeable power. If SW excitation is performed by the continuous application of voltages/currents to the input, which is usually the case, the overall energy consumption is determined by the transducer power and the circuit critical path delay, which leads to high energy consumption because of SWs slowness. However, if transducers are operated in pulses the energy becomes circuit delay independent and it is mainly determined by the transducer power and delay, thus pulse operation should be targeted. In this paper, we utilize a 3-input Majority gate (MAJ) to investigate the Continuous Mode Operation (CMO), and Pulse Mode Operation (PMO). Moreover, we validate CMO and PMO 3-input Majority gate by means of micromagnetic simulations. Furthermore, we evaluate and compare the CMO and PMO Majority gate implementations in term of energy. The results indicate that PMO diminishes MAJ gate energy consumption by a factor of 18. In addition, we describe how PMO can open the road towards the utilization of the Wave Pipelining (WP) concept in SW circuits. We validate the WP concept by means of micromagnetic simulations and we evaluate its implications in term of throughput. Our evaluation indicates that for a circuit formed by four cascaded MAJ gates WP increases the throughput by 3.6x.
△ Less
Submitted 21 June, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Spin Wave Based Full Adder
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Sorin Cotofana,
Said Hamdioui
Abstract:
Spin Waves (SWs) propagate through magnetic waveguides and interfere with each other without consuming noticeable energy, which opens the road to new ultra-low energy circuit designs. In this paper we build upon SW features and propose a novel energy efficient Full Adder (FA) design consisting of The FA 1 Majority and 2 XOR gates, which outputs Sum and Carry-out are generated by means of threshold…
▽ More
Spin Waves (SWs) propagate through magnetic waveguides and interfere with each other without consuming noticeable energy, which opens the road to new ultra-low energy circuit designs. In this paper we build upon SW features and propose a novel energy efficient Full Adder (FA) design consisting of The FA 1 Majority and 2 XOR gates, which outputs Sum and Carry-out are generated by means of threshold and phase detection, respectively. We validate our proposal by means of MuMax3 micromagnetic simulations and we evaluate and compare its performance with state-of-the-art SW, 22nm CMOS, Magnetic Tunnel Junction (MTJ), Spin Hall Effect (SHE), Domain Wall Motion (DWM), and Spin-CMOS implementations. Our evaluation indicates that the proposed SW FA consumes 22.5% and 43% less energy than the direct SW gate based and 22nm CMOS counterparts, respectively. Moreover it exhibits a more than 3 orders of magnitude smaller energy consumption when compared with state-of-the-art MTJ, SHE, DWM, and Spin-CMOS based FAs, and outperforms its contenders in terms of area by requiring at least 22% less chip real-estate.
△ Less
Submitted 21 June, 2021; v1 submitted 16 February, 2021;
originally announced February 2021.
-
Electrical spin-wave spectroscopy in nanoscale waveguides with nonuniform magnetization
Authors:
Giacomo Talmelli,
Daniele Narducci,
Frederic Vanderveken,
Marc Heyns,
Fernanda Irrera,
Inge Asselberghs,
Iuliana P. Radu,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias fie…
▽ More
Spin waves modes in magnetic waveguides with width down to 320 nm have been studied by electrical propagating spin-wave spectroscopy and micromagnetic simulations for both longitudinal and transverse magnetic bias fields. For longitudinal bias fields, a 1.3 GHz wide spin-wave band was observed in agreement with analytical dispersion relations for uniform magnetization. However, transverse bias field led to several distinct bands, corresponding to different quantized width modes, with both negative and positive slopes. Micromagnetic simulations showed that, in this geometry, the magnetization was nonuniform and tilted due to the strong shape anisotropy of the waveguides. Simulations of the quantized spin-wave modes in such nonuniformly magnetized waveguides resulted in spin wave dispersion relations in good agreement with the experiments.
△ Less
Submitted 27 April, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
Compact tunable YIG-based RF resonators
Authors:
José Diogo Costa,
Bruno Figeys,
Xiao Sun,
Nele Van Hoovels,
Harrie A. C. Tilmans,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
We report on the design, fabrication, and characterization of compact tunable yttrium iron garnet (YIG) based RF resonators based on $μ$m-sized spin-wave cavities. Inductive antennas with both ladder and meander configurations were used as transducers between spin waves and RF signals. The excitation of ferromagnetic resonance and standing spin waves in the YIG cavities led to sharp resonances wit…
▽ More
We report on the design, fabrication, and characterization of compact tunable yttrium iron garnet (YIG) based RF resonators based on $μ$m-sized spin-wave cavities. Inductive antennas with both ladder and meander configurations were used as transducers between spin waves and RF signals. The excitation of ferromagnetic resonance and standing spin waves in the YIG cavities led to sharp resonances with quality factors up to 350. The observed spectra were in excellent agreement with a model based on the spin-wave dispersion relations in YIG, showing a high magnetic field tunability of about 29 MHz/mT.
△ Less
Submitted 27 April, 2021; v1 submitted 8 January, 2021;
originally announced January 2021.
-
Fanout of 2 Triangle Shape Spin Wave Logic Gates
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Florin Ciubotaru,
Christoph Adelmann,
Sorin Cotofana,
Said Hamdioui
Abstract:
Having multi-output logic gates saves much energy because the same structure can be used to feed multiple inputs of next stage gates simultaneously. This paper proposes novel triangle shape fanout of 2 spin wave Majority and XOR gates; the Majority gate is achieved by phase detection, whereas the XOR gate is achieved by threshold detection. The proposed logic gates are validated by means of microm…
▽ More
Having multi-output logic gates saves much energy because the same structure can be used to feed multiple inputs of next stage gates simultaneously. This paper proposes novel triangle shape fanout of 2 spin wave Majority and XOR gates; the Majority gate is achieved by phase detection, whereas the XOR gate is achieved by threshold detection. The proposed logic gates are validated by means of micromagnetic simulations. Furthermore, the energy and delay are estimated for the proposed structures and compared with the state-of-the-art spin wave logic gates, and 16nm and 7nm CMOS. The results demonstrate that the proposed structures provide energy reduction of 25%-50% in comparison to the other 2-output spin-wave devices while having the same delay, and energy reduction between 43x and 0.8x when compared to the 16nm and 7nm CMOS while having delay overhead between 11x and 40x.
△ Less
Submitted 24 September, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
2-input 4-output Programmable Spin Wave Logic Gate
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Said Hamdioui,
Sorin Cotofana
Abstract:
To bring Spin Wave (SW) based computing paradigm into practice and develop ultra low power Magnonic circuits and computation platforms, one needs basic logic gates that operate and can be cascaded within the SW domain without requiring back and forth conversion between the SW and voltage domains. To achieve this, SW gates have to possess intrinsic fanout capabilities, be input-output data represen…
▽ More
To bring Spin Wave (SW) based computing paradigm into practice and develop ultra low power Magnonic circuits and computation platforms, one needs basic logic gates that operate and can be cascaded within the SW domain without requiring back and forth conversion between the SW and voltage domains. To achieve this, SW gates have to possess intrinsic fanout capabilities, be input-output data representation coherent, and reconfigurable. In this paper, we address the first and the last requirements and propose a novel 4-output programmable SW logic. First, we introduce the gate structure and demonstrate that, by adjusting the gate output detection method, it can parallelly evaluate any 4-element subset of the 2-input Boolean function set AND, NAND, OR, NOR, XOR, and XNOR. Furthermore, we adjust the structure such that all its 4 outputs produce SWs with the same energy and demonstrate that it can evaluate Boolean function sets while providing fanout capabilities ranging from 1 to 4. We validate our approach by instantiating and simulating different gate configurations such as 4-output AND/OR, 4-output XOR/XNOR, output energy balanced 4-output AND/OR, and output energy balanced 4-output XOR/XNOR by means of Object Oriented Micromagnetic Framework (OOMMF) simulations. Finally, we evaluate the performance of our proposal in terms of delay and energy consumption and compare it against existing state-of-the-art SW and 16nm CMOS counterparts. The results indicate that for the same functionality, our approach provides 3x and 16x energy reduction, when compared with conventional SW and 16nm CMOS implementations, respectively.
△ Less
Submitted 21 June, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Multi-frequency Data Parallel Spin Wave Logic Gates
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Said Hamdioui,
Sorin Cotofana
Abstract:
By their very nature, Spin Waves (SWs) with different frequencies can propagate through the same waveguide without affecting each other, while only interfering with their own species. Therefore, more SW encoded data sets can coexist, propagate, and interact in parallel, which opens the road towards hardware replication free parallel data processing. In this paper, we take advantage of these featur…
▽ More
By their very nature, Spin Waves (SWs) with different frequencies can propagate through the same waveguide without affecting each other, while only interfering with their own species. Therefore, more SW encoded data sets can coexist, propagate, and interact in parallel, which opens the road towards hardware replication free parallel data processing. In this paper, we take advantage of these features and propose a novel data parallel spin wave based computing approach. To explain and validate the proposed concept, byte-wide 2-input XOR and 3-input Majority gates are implemented and validated by means of Object Oriented MicroMagnetic Framework (OOMMF) simulations. Furthermore, we introduce an optimization algorithm meant to minimize the area overhead associated with multifrequency operation and demonstrate that it diminishes the byte-wide gate area by 30% and 41% for XOR and Majority implementations, respectively. To get inside on the practical implications of our proposal we compare the byte-wide gates with conventional functionally equivalent scalar SW gate based implementations in terms of area, delay, and power consumption. Our results indicate that the area optimized 8-bit 2-input XOR and 3-input Majority gates require 4.47x and 4.16x less area, respectively, at the expense of 5% and 7% delay increase, respectively, without inducing any power consumption overhead. Finally, we discuss factors that are limiting the currently achievable parallelism to 8 for phase based gate output detection and demonstrate by means of OOMMF simulations that this can be increased 16 for threshold based detection based gates.
△ Less
Submitted 21 June, 2021; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Magnonic band structure in vertical meander-shaped CoFeB thin films
Authors:
Gianluca Gubbiotti,
Alexandr Sadovnikov,
Evgeny Beginin,
Sergey Nikitov,
Danny Wan,
Anshul Gupta,
Shreya Kundu,
Giacomo Talmelli,
Robert Carpenter,
Inge Asselberghs,
Iuliana P. Radu,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the f…
▽ More
The dispersion of spin waves in vertical meander-shaped CoFeB thin films consisting of segments located at 90° angles with respect to each other is investigated by Brillouin light scattering spectroscopy. We reveal the periodic character of several dispersive branches as well as alternating frequency ranges where spin waves are allowed or forbidden to propagate. Noteworthy is the presence of the frequency band gaps between each couple of successive modes only for wave numbers k=n$π$/a, where n is an even integer number and a is the size of the meander unit cell, whereas the spectra show propagating modes in the orthogonal film segments for the other wavenumbers. The micromagnetic simulations and analytical calculations allow us to understand and explain the results in terms of the mode spatial localization and symmetry. The obtained results demonstrate the wave propagation in three dimensions opening the path for multi-level magnonic architectures for signal processing.
△ Less
Submitted 27 April, 2021; v1 submitted 27 July, 2020;
originally announced July 2020.
-
An Introduction to Spin Wave Computing
Authors:
Abdulqader Mahmoud,
Florin Ciubotaru,
Frederic Vanderveken,
Andrii V. Chumak,
Said Hamdioui,
Christoph Adelmann,
Sorin Cotofana
Abstract:
This paper provides a tutorial overview over recent vigorous efforts to develop computing systems based on spin waves instead of charges and voltages. Spin-wave computing can be considered as a subfield of spintronics, which uses magnetic excitations for computation and memory applications. The tutorial combines backgrounds in spin-wave and device physics as well as circuit engineering to create s…
▽ More
This paper provides a tutorial overview over recent vigorous efforts to develop computing systems based on spin waves instead of charges and voltages. Spin-wave computing can be considered as a subfield of spintronics, which uses magnetic excitations for computation and memory applications. The tutorial combines backgrounds in spin-wave and device physics as well as circuit engineering to create synergies between the physics and electrical engineering communities to advance the field towards practical spin-wave circuits. After an introduction to magnetic interactions and spin-wave physics, all relevant basic aspects of spin-wave computing and individual spin-wave devices are reviewed. The focus is on spin-wave majority gates as they are the most prominently pursued device concept. Subsequently, we discuss the current status and the challenges to combine spin-wave gates and obtain circuits and ultimately computing systems, considering essential aspects such as gate interconnection, logic level restoration, input-output consistency, and fan-out achievement. We argue that spin-wave circuits need to be embedded in conventional CMOS circuits to obtain complete functional hybrid computing systems. The state of the art of benchmarking such hybrid spin-wave--CMOS systems is reviewed and the current challenges to realize such systems are discussed. The benchmark indicates that hybrid spin-wave--CMOS systems promise ultralow-power operation and may ultimately outperform conventional CMOS circuits in terms of the power-delay-area product. Current challenges to achieve this goal include low-power signal restoration in spin-wave circuits as well as efficient spin-wave transducers.
△ Less
Submitted 27 April, 2021; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Spin Wave Normalization Towards all Magnonic Circuits
Authors:
Abdulqader Mahmoud,
Frederic Vanderveken,
Christoph Adelmann,
Florin Ciubotaru,
Sorin Cotofana,
Said Hamdioui
Abstract:
The key enabling factor for Spin Wave (SW) technology utilization for building ultra low power circuits is the ability to energy efficiently cascade SW basic computation blocks. SW Majority gates, which constitute a universal gate set for this paradigm, operating on phase encoded data are not input output coherent in terms of SW amplitude, and as such, their cascading requires information represen…
▽ More
The key enabling factor for Spin Wave (SW) technology utilization for building ultra low power circuits is the ability to energy efficiently cascade SW basic computation blocks. SW Majority gates, which constitute a universal gate set for this paradigm, operating on phase encoded data are not input output coherent in terms of SW amplitude, and as such, their cascading requires information representation conversion from SW to voltage and back, which is by no means energy effective. In this paper, a novel conversion free SW gate cascading scheme is proposed that achieves SW amplitude normalization by means of a directional coupler. After introducing the normalization concept, we utilize it in the implementation of three simple circuits and, to demonstrate its bigger scale potential, of a 2-bit inputs SW multiplier. The proposed structures are validated by means of the Object Oriented Micromagnetic Framework (OOMMF) and GPU-accelerated Micromagnetics (MuMax3). Furthermore, we assess the normalization induced energy overhead and demonstrate that the proposed approach consumes 20% to 33% less energy when compared with the transducers based conventional counterpart. Finally, we introduce a normalization based SW 2-bit inputs multiplier design and compare it with functionally equivalent SW transducer based and 16nm CMOS designs. Our evaluation indicate that the proposed approach provided 26% and 6.25x energy reductions when compared with the conventional approach and 16nm CMOS counterpart, respectively, which demonstrates that our proposal is energy effective and opens the road towards the full utilization of the SW paradigm potential and the development of SW only circuits.
△ Less
Submitted 21 June, 2021; v1 submitted 18 June, 2020;
originally announced June 2020.
-
Backward volume vs Damon-Eshbach: a travelling spin wave spectroscopy comparison
Authors:
U. K. Bhaskar,
G. Talmelli,
F. Ciubotaru,
C. Adelmann,
T. Devolder
Abstract:
We compare the characteristics of electrically transduced Damon-Eshbach (DESWs) and backward volume (BVSWs) configurations within the same, 30 nm thick, ferromagnetic, CoFeB waveguide. Sub-micron U-shaped antennas are used to deliver the necessary in-plane and out-of-plane RF fields. We measure the spin-wave transmission with respect to in-plane field orientation, frequency and propagation distanc…
▽ More
We compare the characteristics of electrically transduced Damon-Eshbach (DESWs) and backward volume (BVSWs) configurations within the same, 30 nm thick, ferromagnetic, CoFeB waveguide. Sub-micron U-shaped antennas are used to deliver the necessary in-plane and out-of-plane RF fields. We measure the spin-wave transmission with respect to in-plane field orientation, frequency and propagation distance. Unlike DESW, BVSWs are reciprocally transduced and collected for either direction of propagation, but their ability to transport energy is lower than DESWs for two reasons. This arises first because BVSW are inductively transduced less efficiently than DESWs. Also, in the range of wavevectors (~5 rad. um-1) typically excited by our antennas, the group velocity of BVSWs stays lower than that of DESW, which leads to reduced propagation ability that impact transmission signals in an exponential manner. In contrast, the group velocity of DESWs is maximum at low fields and decreases continuously with the applied field. The essential features of the measured SW characteristics are well reciprocated by a simple, 1-D analytical model which can be used to assess the potential of each configuration.
△ Less
Submitted 3 June, 2021; v1 submitted 15 January, 2020;
originally announced January 2020.
-
BPZT HBARs for bias-tunable, stress generation at GHz frequencies
Authors:
U. K. Bhaskar,
D. Tierno,
G. Talmelli,
F. Ciubotaru,
C. Adelmann,
T. Devolder
Abstract:
The high frequency performance of strong piezoelectric materials like PZT remains relatively less explored due to the assumption of large dielectric/ferroelectric losses at GHz frequencies. Recently, the advent of magnetoelectric technology as an on-chip route to excite magnetization dynamics has provided the impetus to evaluate the electromechanical performance of PZT at microwave frequencies. In…
▽ More
The high frequency performance of strong piezoelectric materials like PZT remains relatively less explored due to the assumption of large dielectric/ferroelectric losses at GHz frequencies. Recently, the advent of magnetoelectric technology as an on-chip route to excite magnetization dynamics has provided the impetus to evaluate the electromechanical performance of PZT at microwave frequencies. In this work, we demonstrate that HBARs fabricated using Barium-doped PZT (BPZT) films can efficiently generate acoustic waves up to 15 GHz. The ferroelectricity of BPZT endows added functionality to the resonator in the form of voltage tunability of the electromechanical performance. We extract the piezoelectric coefficient by numerically comparing the performance of BPZT with the Mason model. The extracted piezoelectric coefficient ~60 pm/V agrees well with reported values on thin film PZT measured at low frequencies (<100 MHz). Our results suggest that with further improvement in device design and material processing, BPZT resonators could operate as large amplitude, tunable stress transducers at GHz frequencies.
△ Less
Submitted 3 June, 2021; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Reconfigurable sub-micron spin-wave majority gate with electrical transducers
Authors:
Giacomo Talmelli,
Thibaut Devolder,
Nick Träger,
Johannes Förster,
Sebastian Wintz,
Markus Weigand,
Hermann Stoll,
Marc Heyns,
Gisela Schütz,
Iuliana Radu,
Joachim Gräfe,
Florin Ciubotaru,
Christoph Adelmann
Abstract:
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics…
▽ More
Spin waves are excitations in ferromagnetic media that have been proposed as information carriers in hybrid spintronic devices with much lower operation power than conventional charge-based electronics. Their wave nature can be exploited in majority gates by using interference for computation. However, a scalable spin-wave majority gate that can be co-integrated alongside conventional electronics is still lacking. Here, we demonstrate a sub-micron inline spin-wave majority gate with fan-out. Time-resolved imaging of the magnetization dynamics by scanning transmission x-ray microscopy illustrates the device operation. All-electrical spin-wave spectroscopy further demonstrates majority gates with sub-micron dimensions, reconfigurable input and output ports, and frequency-division multiplexing. Challenges for hybrid spintronic computing systems based on spin-wave majority gates are discussed.
△ Less
Submitted 3 September, 2021; v1 submitted 7 August, 2019;
originally announced August 2019.
-
Excitation and propagation of spin waves in non-uniformly magnetized waveguides
Authors:
Frederic Vanderveken,
Hasnain Ahmad,
Marc Heyns,
Bart Sorée,
Christoph Adelmann,
Florin Ciubotaru
Abstract:
The characteristics of spin waves in ferromagnetic waveguides with nonuniform magnetization have been investigated for situations where the shape anisotropy field of the waveguide is comparable to the external bias field. Spin-wave generation was realized by the magnetoelastic effect by applying normal and shear strain components, as well as by the Oersted field emitted by an inductive antenna. Th…
▽ More
The characteristics of spin waves in ferromagnetic waveguides with nonuniform magnetization have been investigated for situations where the shape anisotropy field of the waveguide is comparable to the external bias field. Spin-wave generation was realized by the magnetoelastic effect by applying normal and shear strain components, as well as by the Oersted field emitted by an inductive antenna. The magnetoelastic excitation field has a nonuniform profile over the width of the waveguide because of the nonuniform magnetization orientation, whereas the Oersted field remains uniform. Using micromagnetic simulations, we indicate that both types of excitation fields generate quantised width modes with both odd and even mode numbers as well as tilted phase fronts. We demonstrate that these effects originate from the average magnetization orientation with respect to the main axes of the magnetic waveguide. Furthermore, it is indicated that the excitation efficiency of the second-order mode generally surpasses that of the first-order mode due to their symmetry. The relative intensity of the excited modes can be controlled by the strain state as well as by tuning the dimensions of the excitation area. Finally, we demonstrate that the nonreciprocity of spin-wave radiation due to the chirality of an Oersted field generated by an inductive antenna is absent for magnetoelastic spin-wave excitation.
△ Less
Submitted 21 June, 2021; v1 submitted 25 July, 2019;
originally announced July 2019.
-
A magnonic directional coupler for integrated magnonic half-adders
Authors:
Q. Wang,
M. Kewenig,
M. Schneider,
R. Verba,
F. Kohl,
B. Heinz,
M. Geilen,
M. Mohseni,
B. Lägel,
F. Ciubotaru,
C. Adelmann,
C. Dubs,
S. D. Cotofana,
O. V. Dobrovolskiy,
T. Brächer,
P. Pirro,
A. V. Chumak
Abstract:
Magnons, the quanta of spin waves, could be used to encode information in beyond-Moore computing applications, and magnonic device components, including logic gates, transistors, and units for non-Boolean computing, have already been developed. Magnonic directional couplers, which can function as circuit building blocks, have also been explored, but have been impractical because of their millimetr…
▽ More
Magnons, the quanta of spin waves, could be used to encode information in beyond-Moore computing applications, and magnonic device components, including logic gates, transistors, and units for non-Boolean computing, have already been developed. Magnonic directional couplers, which can function as circuit building blocks, have also been explored, but have been impractical because of their millimetre dimensions and multi-mode spectra. Here, we report a magnonic directional coupler based on yttrium iron garnet single-mode waveguides of 350 nm width. We use the amplitude of a spin-wave to encode information and to guide it to one of the two outputs of the coupler depending on the signal magnitude, frequency, and the applied magnetic field. Using micromagnetic simulations, we also propose an integrated magnonic half-adder that consists of two directional couplers and processes all information within the magnon domain with aJ energy consumption.
△ Less
Submitted 7 September, 2021; v1 submitted 29 May, 2019;
originally announced May 2019.
-
Experimental Realization of a Passive GHz Frequency-Division Demultiplexer for Magnonic Logic Networks
Authors:
Frank Heussner,
Giacomo Talmelli,
Moritz Geilen,
Björn Heinz,
Thomas Brächer,
Thomas Meyer,
Florin Ciubotaru,
Christoph Adelmann,
Kei Yamamoto,
Alexander A. Serga,
Burkard Hillebrands,
Philipp Pirro
Abstract:
The emerging field of magnonics employs spin waves and their quanta, magnons, to implement wave-based computing on the micro- and nanoscale. Multi-frequency magnon networks would allow for parallel data processing within single logic elements whereas this is not the case with conventional transistor-based electronic logic. However, a lack of experimentally proven solutions to efficiently combine a…
▽ More
The emerging field of magnonics employs spin waves and their quanta, magnons, to implement wave-based computing on the micro- and nanoscale. Multi-frequency magnon networks would allow for parallel data processing within single logic elements whereas this is not the case with conventional transistor-based electronic logic. However, a lack of experimentally proven solutions to efficiently combine and separate magnons of different frequencies has impeded the intensive use of this concept. In this Letter, the experimental realization of a spin-wave demultiplexer enabling frequency-dependent separation of magnonic signals in the GHz range is demonstrated. The device is based on two-dimensional magnon transport in the form of spin-wave beams in unpatterned magnetic films. The intrinsic frequency-dependence of the beam direction is exploited to realize a passive functioning obviating an external control and additional power consumption. This approach paves the way to magnonic multiplexing circuits enabling simultaneous information transport and processing.
△ Less
Submitted 6 September, 2021; v1 submitted 29 April, 2019;
originally announced April 2019.
-
Integrated magnonic half-adder
Authors:
Qi Wang,
Roman Verba,
Thomas Brächer,
Florin Ciubotaru,
Christoph Adelmann,
Sorin D. Cotofana,
Philipp Pirro,
Andrii V. Chumak
Abstract:
Spin waves and their quanta magnons open up a promising branch of high-speed and low-power information processing. Several important milestones were achieved recently in the realization of separate magnonic data processing units including logic gates, a magnon transistor and units for non-Boolean computing. Nevertheless, the realization of an integrated magnonic circuit consisting of at least two…
▽ More
Spin waves and their quanta magnons open up a promising branch of high-speed and low-power information processing. Several important milestones were achieved recently in the realization of separate magnonic data processing units including logic gates, a magnon transistor and units for non-Boolean computing. Nevertheless, the realization of an integrated magnonic circuit consisting of at least two logic gates and suitable for further integration is still an unresolved challenge. Here we demonstrate such an integrated circuit numerically on the example of a magnonic half-adder. Its key element is a nonlinear directional coupler serving as combined XOR and AND logic gate that utilizes the dependence of the spin wave dispersion on its amplitude. The circuit constitutes of only three planar nano-waveguides and processes all information within the magnon domain. Benchmarking of the proposed device is performed showing the potential for sub-aJ energy consumption per operation.
△ Less
Submitted 8 November, 2019; v1 submitted 7 February, 2019;
originally announced February 2019.
-
Strain coupling optimization in magnetoelectric transducers
Authors:
Davide Tierno,
Florin Ciubotaru,
Rutger Duflou,
Marc Heyns,
Iuliana P. Radu,
Christoph Adelmann
Abstract:
The mechanical behavior of magnetoelectric transducers consisting of piezoelectric-magnetostrictive bilayers has been modeled. The effect of the aspect ratio of the transducer as well as the influence of non-active surrounding layers has been modeled, including a passivation layer surrounding the active device, a clam** layer above the active device, and an interfacial layer that might be insert…
▽ More
The mechanical behavior of magnetoelectric transducers consisting of piezoelectric-magnetostrictive bilayers has been modeled. The effect of the aspect ratio of the transducer as well as the influence of non-active surrounding layers has been modeled, including a passivation layer surrounding the active device, a clam** layer above the active device, and an interfacial layer that might be inserted between the magnetostrictive and the piezoelectric layers. Strategies to control and maximize the strain magnitude and orientation based on material selection and device design are proposed.
△ Less
Submitted 16 October, 2017;
originally announced December 2017.
-
Micromagnetic simulations of magnetoelastic spin wave excitation in scaled magnetic waveguides
Authors:
Rutger Duflou,
Florin Ciubotaru,
Adrien Vaysset,
Marc Heyns,
Bart Soree,
Iuliana P. Radu,
Christoph Adelmann
Abstract:
We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to t…
▽ More
We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to the effect of the demagnetizing field leads to the excitation of spin waves for oscillating normal strains both parallel and perpendicular to the magnetization. The excitation by biaxial normal in-plane strain was found to be much more efficient than by uniaxial normal out-of-plane strain. For narrow waveguides with widths of 200\,nm, the excitation efficiency of biaxial normal in-plane strain was comparable to that of shear strain.
△ Less
Submitted 21 August, 2017;
originally announced August 2017.
