Showing 1–15 of 15 results for author: Cindolo, F

Design and performance of the ENUBET monitored neutrino beam

Authors: F. Acerbi, I. Angelis, L. Bomben, M. Bonesini, F. Bramati, A. Branca, C. Brizzolari, G. Brunetti, M. Calviani, S. Capelli, S. Carturan, M. G. Catanesi, S. Cecchini, N. Charitonidis, F. Cindolo, G. Cogo, G. Collazuol, F. Dal Corso, C. Delogu, G. De Rosa, A. Falcone, B. Goddard, A. Gola, D. Guffanti, L. Halić , et al. (47 additional authors not shown)

Abstract: The ENUBET project is aimed at designing and experimentally demonstrating the concept of monitored neutrino beams. These novel beams are enhanced by an instrumented decay tunnel, whose detectors reconstruct large-angle charged leptons produced in the tunnel and give a direct estimate of the neutrino flux at the source. These facilities are thus the ideal tool for high-precision neutrino cross-sect… ▽ More The ENUBET project is aimed at designing and experimentally demonstrating the concept of monitored neutrino beams. These novel beams are enhanced by an instrumented decay tunnel, whose detectors reconstruct large-angle charged leptons produced in the tunnel and give a direct estimate of the neutrino flux at the source. These facilities are thus the ideal tool for high-precision neutrino cross-section measurements at the GeV scale because they offer superior control of beam systematics with respect to existing facilities. In this paper, we present the first end-to-end design of a monitored neutrino beam capable of monitoring lepton production at the single particle level. This goal is achieved by a new focusing system without magnetic horns, a 20 m normal-conducting transfer line for charge and momentum selection, and a 40 m tunnel instrumented with cost-effective particle detectors. Employing such a design, we show that percent precision in cross-section measurements can be achieved at the CERN SPS complex with existing neutrino detectors. △ Less

Submitted 18 August, 2023; originally announced August 2023.

Comments: 24 pages, 33 figures

The ENUBET positron tagger prototype: construction and testbeam performance

Authors: F. Acerbi, M. Bonesini, F. Bramati, A. Branca, C. Brizzolari, G. Brunetti, S. Capelli, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, C. Delogu, G. De Rosa, A. Falcone, A. Gola, C. Jollet, B. Klicek, Y. Kudenko, M. Laveder, A. Longhin, L. Ludovici, E. Lutsenko , et al. (28 additional authors not shown)

Abstract: A prototype for the instrumented decay tunnel of ENUBET was tested in 2018 at the CERN East Area facility with charged particles up to 5 GeV. This detector is a longitudinal sampling calorimeter with lateral scintillation light readout. The calorimeter was equipped by an additional "$t_0$-layer" for timing and photon discrimination. The performance of this detector in terms of electron energy reso… ▽ More A prototype for the instrumented decay tunnel of ENUBET was tested in 2018 at the CERN East Area facility with charged particles up to 5 GeV. This detector is a longitudinal sampling calorimeter with lateral scintillation light readout. The calorimeter was equipped by an additional "$t_0$-layer" for timing and photon discrimination. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. The $t_0$-layer was studied both in standalone mode using pion charge exchange and in combined mode with the calorimeter to assess the light yield and the 1 mip/2 mip separation capability. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements. △ Less

Submitted 12 June, 2020; originally announced June 2020.

Comments: 23 pages, 20 figures, to appear in JINST

The hadronic beamline of the ENUBET neutrino beam

Authors: ENUBET collaboration, C. Delogu, F. Acerbi, A. Berra, M. Bonesini, A. Branca, C. Brizzolari, G. Brunetti, M. Calviani, S. Capelli, S. Carturan, M. G. Catanesi, S. Cecchini, N. Charitonidis, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, A. Falcone, A. Gola, C. Jollet, V. Kain, B. Klicek, Y. Kudenko , et al. (35 additional authors not shown)

Abstract: The ENUBET ERC project (2016-2021) is studying a facility based on a narrow band beam capable of constraining the neutrino fluxes normalization through the monitoring of the associated charged leptons in an instrumented decay tunnel. A key element of the project is the design and optimization of the hadronic beamline. In this proceeding we present progress on the studies of the proton extraction s… ▽ More The ENUBET ERC project (2016-2021) is studying a facility based on a narrow band beam capable of constraining the neutrino fluxes normalization through the monitoring of the associated charged leptons in an instrumented decay tunnel. A key element of the project is the design and optimization of the hadronic beamline. In this proceeding we present progress on the studies of the proton extraction schemes. We also show a realistic implementation and simulation of the beamline. △ Less

Submitted 26 November, 2020; v1 submitted 7 April, 2020; originally announced April 2020.

Comments: Poster presented at NuPhys2019 (London, 16-18 December 2019). 4 pages, 4 figures. Typo in author list corrected

Decay tunnel instrumentation for the ENUBET neutrino beam

Authors: F. Acerbi, A. Berra, M. Bonesini, A. Branca, C. Brizzolari, G. Brunetti, M. Calviani, S. Capelli, S. Carturan, M. G. Catanesi, S. Cecchini, N. Charitonidis, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, C. Delogu, G. De Rosa, A. Falcone, A. Gola, C. Jollet, V. Kain, B. Klicek, Y. Kudenko, M. Laveder , et al. (34 additional authors not shown)

Abstract: The uncertainty in the initial neutrino flux is the main limitation for a precise determination of the absolute neutrino cross section. The ERC funded ENUBET project (2016-2021) is studying a facility based on a narrow band beam to produce an intense source of electron neutrinos with a ten-fold improvement in accuracy. Since March 2019 ENUBET is also a Neutrino Platform experiment at CERN: NP06/EN… ▽ More The uncertainty in the initial neutrino flux is the main limitation for a precise determination of the absolute neutrino cross section. The ERC funded ENUBET project (2016-2021) is studying a facility based on a narrow band beam to produce an intense source of electron neutrinos with a ten-fold improvement in accuracy. Since March 2019 ENUBET is also a Neutrino Platform experiment at CERN: NP06/ENUBET. A key element of the project is the instrumentation of the decay tunnel to monitor large angle positrons produced together with $ν_e$ in the three body decays of kaons ($K_{e3}$) and to discriminate them from neutral and charged pions. The need for an efficient and high purity e/$π$ separation over a length of several meters, and the requirements for fast response and radiation hardness imposed by the harsh beam environment, suggested the implementation of a longitudinally segmented Fe/scintillator calorimeter with a readout based on WLS fibers and SiPM detectors. An extensive experimental program through several test beam campaigns at the CERN-PS T9 beam line has been pursued on calorimeter prototypes, both with a shashlik and a lateral readout configuration. The latter, in which fibers collect the light from the side of the scintillator tiles, allows to place the light sensors away from the core of the calorimeter, thus reducing possible irradiation damages with respect to the shashlik design. This contribution will present the achievements of the prototy** activities carried out, together with irradiation tests made on the Silicon Photo-Multipliers. The results achieved so far pin down the technology of choice for the construction of the 3 m long demonstrator that will take data in 2021. △ Less

Submitted 6 April, 2020; originally announced April 2020.

Comments: Talk presented at the "15th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD19)", 14-17 October 2019. Siena, Italy. 9 pages, 7 figures

Polysiloxane-based scintillators for shashlik calorimeters

Authors: F. Acerbi, A. Branca, C. Brizzolari, G. Brunetti, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, A. Gola, C. Jollet, B. Kliček, Y. Kudenko, M. Laveder, A. Longhin, L. Ludovici, E. Lutsenko, L. Magaletti, G. Mandrioli, T. Marchi, A. Margotti , et al. (24 additional authors not shown)

Abstract: We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a $\sim$6$\times$6$\times$45 cm$^3$ (13 $X_0$ depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density… ▽ More We present the first application of polysiloxane-based scintillators as active medium in a shashlik sampling calorimeter. These results were obtained from a testbeam campaign of a $\sim$6$\times$6$\times$45 cm$^3$ (13 $X_0$ depth) prototype. A Wavelength Shifting fiber array of 36 elements runs perpendicularly to the stack of iron (15 mm) and polysiloxane scintillator (15 mm) tiles with a density of about one over cm$^2$. Unlike shashlik calorimeters based on plastic organic scintillators, here fibers are optically matched with the scintillator without any intermediate air gap. The prototype features a compact light readout based on Silicon Photo-Multipliers embedded in the bulk of the detector. The detector was tested with electrons, pions and muons with energies ranging from 1 to 7 GeV at the CERN-PS. This solution offers a highly radiation hard detector to instrument the decay region of a neutrino beam, providing an event-by-event measurement of high-angle decay products associated with neutrino production (ENUBET, Enhanced NeUtrino BEams from kaon Tagging, ERC project). The results in terms of light yield, uniformity and energy resolution, are compared to a similar calorimeter built with ordinary plastic scintillators. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Comments: 28 pages, 16 figures. To appear in NIM-A

Journal ref: Nuclear Instruments and Methods in Physics Research A 956 (2020) 163379

The ENUBET narrow band neutrino beam

Authors: ENUBET Collaboration, M. Tenti, F. Acerbi, G. Ballerini, M. Bonesini, C. Brizzolari, G. Brunetti M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, B. Goddard, A. Gola, R. A. Intonti, C. Jollet, V. Kain, B. Klicek, Y. Kudenko, M. Laveder, A. Longhin , et al. (32 additional authors not shown)

Abstract: The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully contr… ▽ More The narrow band beam of ENUBET is the first implementation of the "monitored neutrino beam" technique proposed in 2015. ENUBET has been designed to monitor lepton production in the decay tunnel of neutrino beams and to provide a 1% measurement of the neutrino flux at source. In particular, the three body semi-leptonic decay of kaons monitored by large angle positron production offers a fully controlled $ν_{e}$ source at the GeV scale for a new generation of short baseline experiments. In this contribution the performances of the positron tagger prototypes tested at CERN beamlines in 2016-2018 are presented. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Comments: Poster presented at NuPhys2018 (London 19-21 December 2018). 5 pages, 3 figures

Report number: NuPhys2018-Tenti

The ENUBET Beamline

Authors: ENUBET Collaboration, G. Brunetti, F. Acerbi, G. Ballerini, M. Bonesini, A. Branca, C. Brizzolari, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, C. Delogu, A. Falcone, B. Goddard, A. Gola, R. A. Intonti, C. Jollet, V. Kain, B. Klicek, Y. Kudenko , et al. (34 additional authors not shown)

Abstract: The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline… ▽ More The ENUBET ERC project (2016-2021) is studying a narrow band neutrino beam where lepton production can be monitored at single particle level in an instrumented decay tunnel. This would allow to measure $ν_μ$ and $ν_{e}$ cross sections with a precision improved by about one order of magnitude compared to present results. In this proceeding we describe a first realistic design of the hadron beamline based on a dipole coupled to a pair of quadrupole triplets along with the optimisation guidelines and the results of a simulation based on G4beamline. A static focusing design, though less efficient than a horn-based solution, results several times more efficient than originally expected. It works with slow proton extractions reducing drastically pile-up effects in the decay tunnel and it paves the way towards a time-tagged neutrino beam. On the other hand a horn-based transferline would ensure higher yields at the tunnel entrance. The first studies conducted at CERN to implement the synchronization between a few ms proton extraction and a horn pulse of 2-10 ms are also described. △ Less

Submitted 26 November, 2020; v1 submitted 21 March, 2019; originally announced March 2019.

Comments: Poster presented at NuPhys2018 (London 19-21 December 2018). 4 pages, 3 figures

Report number: NuPhys2018-Brunetti

Irradiation and performance of RGB-HD Silicon Photomultipliers for calorimetric applications

Authors: F. Acerbi, G. Ballerini, A. Berra, C. Brizzolari, G. Brunetti, M. G. Catanesi, S. Cecchini, F. Cindolo, A. Coffani, G. Collazuol, E. Conti, F. Dal Corso, C. Delogu, G. De Rosa, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, A. Longhin, L. Ludovici, L. Magaletti, G. Mandrioli, A. Margotti, V. Mascagna, N. Mauri , et al. (19 additional authors not shown)

Abstract: Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were c… ▽ More Silicon Photomultipliers with cell-pitch ranging from 12 $μ$m to 20 $μ$m were tested against neutron irradiation at moderate fluences to study their performance for calorimetric applications. The photosensors were developed by FBK employing the RGB-HD technology. We performed irradiation tests up to $2 \times 10^{11}$ n/cm$^2$ (1 MeV eq.) at the INFN-LNL Irradiation Test facility. The SiPMs were characterized on-site (dark current and photoelectron response) during and after irradiations at different fluences. The irradiated SiPMs were installed in the ENUBET compact calorimetric modules and characterized with muons and electrons at the CERN East Area facility. The tests demonstrate that both the electromagnetic response and the sensitivity to minimum ionizing particles are retained after irradiation. Gain compensation can be achieved increasing the bias voltage well within the operation range of the SiPMs. The sensitivity to single photoelectrons is lost at $\sim 10^{10}$ n/cm$^2$ due to the increase of the dark current. △ Less

Submitted 24 January, 2019; originally announced January 2019.

Comments: 14 pages, 13 figures. To appear in JINST

A high precision neutrino beam for a new generation of short baseline experiments

Authors: F. Acerbi, G. Ballerini, S. Bolognesi, M. Bonesini, C. Brizzolari, G. Brunetti, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, F. Di Lodovico, C. Delogu, A. Falcone, A. Gola, R. A. Intonti, C. Jollet, B. Klicek, Y. Kudenko, M. Laveder, A. Longhin, L. Ludovici , et al. (31 additional authors not shown)

Abstract: The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would impro… ▽ More The current generation of short baseline neutrino experiments is approaching intrinsic source limitations in the knowledge of flux, initial neutrino energy and flavor. A dedicated facility based on conventional accelerator techniques and existing infrastructures designed to overcome these impediments would have a remarkable impact on the entire field of neutrino oscillation physics. It would improve by about one order of magnitude the precision on $ν_μ$ and $ν_e$ cross sections, enable the study of electroweak nuclear physics at the GeV scale with unprecedented resolution and advance searches for physics beyond the three-neutrino paradigm. In turn, these results would enhance the physics reach of the next generation long baseline experiments (DUNE and Hyper-Kamiokande) on CP violation and their sensitivity to new physics. In this document, we present the physics case and technology challenge of high precision neutrino beams based on the results achieved by the ENUBET Collaboration in 2016-2018. We also set the R&D milestones to enable the construction and running of this new generation of experiments well before the start of the DUNE and Hyper-Kamiokande data taking. We discuss the implementation of this new facility at three different level of complexity: $ν_μ$ narrow band beams, $ν_e$ monitored beams and tagged neutrino beams. We also consider a site specific implementation based on the CERN-SPS proton driver providing a fully controlled neutrino source to the ProtoDUNE detectors at CERN. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Comments: 13 pages, 3 figures, submitted as an input document for the European Particle Physics Strategy. Dec. 2018

Shashlik calorimeters: novel compact prototypes for the ENUBET experiment

Authors: M. Pari, G. Ballerini, A. Berra, R. Boanta, M. Bonesini, C. Brizzolari, G. Brunetti, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, A. Coffani, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, C. Delogu, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, M. Laveder, A. Longhin, P. F. Loverre , et al. (28 additional authors not shown)

Abstract: We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators. We summarize in this paper the detector R&D performed in the framework of the ERC ENUBET Project. We discuss in particular the latest results on longitudinally segmented shashlik calorimeters and the first HEP application of polysiloxane-based scintillators. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Comments: 4 pages, 1 figure, Conference proceeding of PM2018 - 14th Pisa Meeting on Advanced Detectors, from 27th May to 2nd June 2018, La Biodola, Isola D$'$Elba (Italy), To be published in: Nuclear Inst. and Methods in Physics Research, A

A narrow band neutrino beam with high precision flux measurements

Authors: A. Coffani, G. Ballerini, A. Berra, R. Boanta, M. Bonesini, C. Brizzolari, G. Brunetti, M. Calviani, S. Carturan, M. G. Catanesi, S. Cecchini, F. Cindolo, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, A. Gola, R. A. Intonti, C. Jollet, Y. Kudenko, M. Laveder, A. Longhin, P. F. Loverre, L. Ludovici, L. Magaletti , et al. (27 additional authors not shown)

Abstract: The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the s… ▽ More The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the selection of the energy of the outcoming neutrinos. We report here the latest results in the development and test of the instrumentation for the decay tunnel. Special emphasis is given to irradiation tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the first application of polysiloxane-based scintillators in high energy physics. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Comments: Poster presented at NuPhys2017 (London, 20-22 December 2017). 5 pages, 2 figures

Report number: NuPhys2017-Coffani

Testbeam performance of a shashlik calorimeter with fine-grained longitudinal segmentation

Authors: G. Ballerini, A. Berra, R. Boanta, C. Brizzolari, G. Brunetti, M. G. Catanesi, S. Cecchini, F. Cindolo, A. Coffani, G. Collazuol, E. Conti, F. Dal Corso, G. De Rosa, A. Gola, C. Jollet, A. Longhin, L. Ludovici, L. Magaletti, G. Mandrioli, A. Margotti, V. Mascagna, A. Meregaglia, M. Pari, L. Pasqualini, G. Paternoster , et al. (12 additional authors not shown)

Abstract: An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal… ▽ More An iron- plastic-scintillator shashlik calorimeter with a 4.3 $X_0$ longitudinal segmentation was tested in November 2016 at the CERN East Area facility with charged particles up to 5 GeV. The performance of this detector in terms of electron energy resolution, linearity, response to muons and hadron showers are presented in this paper and compared with simulation. Such a fine-grained longitudinal segmentation is achieved using a very compact light readout system developed by the SCENTT and ENUBET Collaborations, which is based on fiber-SiPM coupling boards embedded in the bulk of the detector. We demonstrate that this system fulfills the requirements for neutrino physics applications and discuss performance and additional improvements. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Comments: 21 pages, 19 figures. To appear in JINST

A compact light readout system for longitudinally segmented shashlik calorimeters

Authors: A. Berra, C. Brizzolari, S. Cecchini, F. Cindolo, C. Jollet, A. Longhin, L. Ludovici, G. Mandrioli, N. Mauri, A. Meregaglia, A. Paoloni, L. Pasqualini, L. Patrizii, M. Pozzato, F. Pupilli, M. Prest, G. Sirri, F. Terranova, E. Vallazza, L. Votano

Abstract: The longitudinal segmentation of shashlik calorimeters is challenged by dead zones and non-uniformities introduced by the light collection and readout system. This limitation can be overcome by direct fiber-photosensor coupling, avoiding routing and bundling of the wavelength shifter fibers and embedding ultra-compact photosensors (SiPMs) in the bulk of the calorimeter. We present the first experi… ▽ More The longitudinal segmentation of shashlik calorimeters is challenged by dead zones and non-uniformities introduced by the light collection and readout system. This limitation can be overcome by direct fiber-photosensor coupling, avoiding routing and bundling of the wavelength shifter fibers and embedding ultra-compact photosensors (SiPMs) in the bulk of the calorimeter. We present the first experimental test of this readout scheme performed at the CERN PS-T9 beamline in 2015 with negative particles in the 1-5~GeV energy range. In this paper, we demonstrate that the scheme does not compromise the energy resolution and linearity compared with standard light collection and readout systems. In addition, we study the performance of the calorimeter for partially contained charged hadrons to assess the $e/π$ separation capability and the response of the photosensors to direct ionization. △ Less

Submitted 31 May, 2016; originally announced May 2016.

Comments: To appear in Nuclear Instruments and Methods in Physics Research, A

A non-conventional neutrino beamline for the measurement of the electron neutrino cross section

Authors: A. Berra, S. Cecchini, F. Cindolo, C. Jollet, A. Longhin, L. Ludovici, G. Mandrioli, N. Mauri, A. Meregaglia, A. Paoloni, L. Pasqualini, L. Patrizii, F. Pupilli, M. Pozzato, M. Prest, G. Sirri, F. Terranova, E. Vallazza, L. Votano

Abstract: Absolute neutrino cross section measurements at the GeV scale are ultimately limited by the knowledge of the initial $ν$ flux. In order to evade such limitation and reach the accuracy that is needed for precision oscillation physics ($\sim 1$%), substantial advances in flux measurement techniques are requested. We discuss here the possibility of instrumenting the decay tunnel to identify large-ang… ▽ More Absolute neutrino cross section measurements at the GeV scale are ultimately limited by the knowledge of the initial $ν$ flux. In order to evade such limitation and reach the accuracy that is needed for precision oscillation physics ($\sim 1$%), substantial advances in flux measurement techniques are requested. We discuss here the possibility of instrumenting the decay tunnel to identify large-angle positrons and monitor $ν_e$ production from $K^+ \rightarrow e^+ ν_e π^0$ decays. This non conventional technique opens up opportunities to measure the $ν_e$ CC cross section at the per cent level in the energy range of interest for DUNE/HK. We discuss the progress in the simulation of the facility (beamline and instrumentation) and the ongoing R&D. △ Less

Submitted 27 December, 2015; originally announced December 2015.

Comments: 10 pages, 2 figures; to appear in the Proceedings of NuFact15

The EEE Project

Authors: R. Antolini, R. Baldini Ferroli, M. Caporaloni, A. Chiavassa, L. Cifarelli, F. Cindolo, E. Coccia, S. De Pasquale, M. Garbini, C. Gustavino, D. Hatzifotiadou, G. Imponente, H. Menghetti, G. Piragino, G. Sartorelli, M. Selvi, C. Williams, A. Zichichi

Abstract: The new experiment ``Extreme Energy Events'' (EEE) to detect extensive air showers through muon detection is starting in Italy. The use of particle detectors based on Multigap Resistive Plate Chambers (MRPC) will allow to determine with a very high accuracy the direction of the axis of cosmic ray showers initiated by primaries of ultra-high energy, together with a high temporal resolution. The i… ▽ More The new experiment ``Extreme Energy Events'' (EEE) to detect extensive air showers through muon detection is starting in Italy. The use of particle detectors based on Multigap Resistive Plate Chambers (MRPC) will allow to determine with a very high accuracy the direction of the axis of cosmic ray showers initiated by primaries of ultra-high energy, together with a high temporal resolution. The installation of many of such 'telescopes' in numerous High Schools scattered all over the Italian territory will also allow to investigate coincidences between multiple primaries producing distant showers. Here we present the experimental apparatus and its tasks. △ Less

Submitted 4 July, 2006; originally announced July 2006.

Comments: 4 pages, 29th ICRC 2005, Pune, India

Journal ref: 29th International Cosmic Ray Conference Pune (2005) 8, 279-282