-
Heat Transfer Coefficients of Moving Particle Beds from Flow-Dependent Particle Bed Thermal Conductivity and Near-Wall Resistance
Authors:
Sarath R. Adapa,
Xintong Zhang,
Tianshi Feng,
Ka Man Chung,
Kevin J. Albrecht,
Clifford K. Ho,
Dimitri A. Madden,
Renkun Chen
Abstract:
Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their station…
▽ More
Determination of heat transfer coefficients for flowing packed particle beds is essential to the design of particle heat exchangers, and other thermal processes. While such dense granular flows fall into the well-known plug-flow regime, the discrete nature of granular materials alters the thermal transport processes in both the near-wall and bulk regions of flowing particle beds from their stationary counterparts. As a result, heat transfer correlations based on the stationary particle bed thermal conductivity could be inadequate for flowing particles in a heat exchanger. Earlier works have achieved reasonable agreement with experiments by treating granular media as a plug-flow continuum with a near-wall thermal resistance in series. However, the properties of the continuum were often obtained from measurements on stationary beds owing to the difficulty of flowing bed measurements. In this work, it was found that the properties of a stationary bed are highly sensitive to the method of particle packing and there is a decrease in the particle bed thermal conductivity and increase in the near-wall thermal resistance, measured as an effective air gap thickness, on the onset of particle flow. These variations in the thermophysical properties of stationary and flowing particle beds can lead to errors in heat transfer coefficient calculations. Therefore, the heat transfer coefficients for granular flows were calculated using experimentally determined flowing particle bed thermal conductivity and near-wall air gap for ceramic particles -CARBOCP40/100(275 um), HSP40/70(404um) and HSP16/30(956um); at velocities of 5-15mms-1; and temperatures of 300-650C. The thermal conductivity and air gap values for CP40/100 and HSP40/70 were further used to calculate heat transfer coefficients across different particle bed temperatures and velocities for different parallel-plate heat exchanger dimensions.
△ Less
Submitted 27 May, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Micromechanical Origin of Heat Transfer to Granular Flow
Authors:
Xintong Zhang,
Sarath Adapa,
Tianshi Feng,
Jian Zeng,
Ka Man Chung,
Clifford Ho,
Kevin Albrecht,
Renkun Chen
Abstract:
Heat transfer to a granular flow is comprised of two resistances in series: near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective contribution. Here, we use a frequency modulated photothermal technique to separately quantify the thermal resistances in the near-wall and the bulk bed regions of particle…
▽ More
Heat transfer to a granular flow is comprised of two resistances in series: near the wall and within the bulk particle bed, neither of which is well understood due to the lack of experimental probes to separate their respective contribution. Here, we use a frequency modulated photothermal technique to separately quantify the thermal resistances in the near-wall and the bulk bed regions of particles in flowing states. Compared to the stationary state, the flowing leads to a higher near-wall resistance and a lower thermal conductivity of bulk beds. Coupled with discrete element method simulation, we show that the near-wall resistance can be explained by particle diffusion in granular flows.
△ Less
Submitted 28 May, 2024; v1 submitted 19 November, 2023;
originally announced November 2023.
-
Thermal Conductivity Measurement Using Modulated Photothermal Radiometry for Nitrate and Chloride Molten Salts
Authors:
Ka Man Chung,
Tianshi Feng,
Jian Zeng,
Sarath Reddy Adapa,
Xintong Zhang,
Andrew Z. Zhao,
Ye Zhang,
Peiwen Li,
Youyang Zhao,
Javier E. Garay,
Renkun Chen
Abstract:
Molten salts are being used or explored for thermal energy storage and conversion systems in concentrating solar power and nuclear power plants. Thermal conductivity of molten salts is an important thermophysical property dictating the performance and cost of these systems, but its accurate measurement has been challenging, as evidenced by wide scattering of existing data in literature. The corros…
▽ More
Molten salts are being used or explored for thermal energy storage and conversion systems in concentrating solar power and nuclear power plants. Thermal conductivity of molten salts is an important thermophysical property dictating the performance and cost of these systems, but its accurate measurement has been challenging, as evidenced by wide scattering of existing data in literature. The corrosive and conducting nature of these fluids also leads to time consuming sample preparation processes of many contact-based measurements. Here, we report the measurement of thermal conductivity of molten salts using a modulated photothermal radiometry (MPR) technique, which is a laser-based, non-contact, frequency-domain method adopted for molten salts for the first time. By unitizing the advantages of front side sensing of frequency-domain measurements and the vertical holder orientation, the technique can minimize the natural convection and salt cree** effects, thus yielding accurate molten salt thermal conductivity. The MPR technique is first calibrated using standard molten materials including paraffin wax and sulfur. It is then applied on measuring pure nitrate salts ($NaNO_3$ and $KNO_3$), solar salt ($NaNO_3-KNO_3$ mixture), and chloride salt ($NaCl-KCl-MgCl_2$). The measurement results are compared with data from literature, especially those obtained from laser flash analysis (LFA). Our results demonstrate that the MPR is a convenient and reliable technique of measuring thermal conductivity of molten salts. Accurate thermal conductivity data of molten salts will be valuable in develo** the next-generation high-temperature thermal energy storage and conversion systems.
△ Less
Submitted 31 August, 2023;
originally announced September 2023.
-
In-situ Thermophysical Measurement of Flowing Molten Chloride Salt Using Modulated Photothermal Radiometry
Authors:
Ka Man Chung,
Ye Zhang,
Jian Zeng,
Fouad Haddad,
Sarath Reddy Adapa,
Tianshi Feng,
Peiwen Li,
Renkun Chen
Abstract:
Molten salts are a leading candidate for high-temperature heat transfer fluids (HTFs) for thermal energy storage and conversion systems in concentrated solar power (CSP) and nuclear energy power plants. The ability to probe molten salt thermal transport properties in both stationary and flowing status is important for the evaluation of their heat transfer performance under realistic operational co…
▽ More
Molten salts are a leading candidate for high-temperature heat transfer fluids (HTFs) for thermal energy storage and conversion systems in concentrated solar power (CSP) and nuclear energy power plants. The ability to probe molten salt thermal transport properties in both stationary and flowing status is important for the evaluation of their heat transfer performance under realistic operational conditions, including the temperature range and potential degradation due to corrosion and contamination. However, accurate thermal transport properties are usually challenging to obtain even for stagnant molten salts due to different sources of errors from convection, radiation, and corrosion, let alone flowing ones. To the best of authors' knowledge, there is no available in-situ technique for measuring flowing molten salt thermal conductivity. Here, we report the first in-situ flowing molten salt thermal conductivity measurement using modulated photothermal radiometry (MPR). We could successfully perform the first in-situ thermal conductivity measurement of flowing molten $NaCl-KCl-MgCl_2$ in the typical operating temperature (520 and 580 $^oC$) with flow velocities ranging from around 0.3 to 1.0 $m$$s^-1$. The relative change of the molten salt thermal conductivity was measured. Gnielinski's correlation was also used to estimate the heat transfer coefficient h of the flowing $NaCl-KCl-MgCl_2$ in the given experimental condition. The work showed the potential of the MPR technique serving as an in-situ diagnostics tool to evaluate the heat transfer performance of flowing molten salts and other high-temperature HTFs.
△ Less
Submitted 31 August, 2023;
originally announced September 2023.
-
Kinetic Electron Cooling in Magnetic Nozzles: Experiments and Modeling
Authors:
June Young Kim,
Kyoung-Jae Chung,
Kazunori Takahashi,
Mario Merino,
Eduardo Ahedo
Abstract:
As long-distance space travel requires propulsion systems with greater operational flexibility and lifetimes, there is a growing interest in electrodeless plasma thrusters that offer the opportunity of improved scalability, larger throttleability, running on different propellants, and limit device erosion. The majority of electrodeless designs rely on a magnetic nozzle (MN) for the acceleration of…
▽ More
As long-distance space travel requires propulsion systems with greater operational flexibility and lifetimes, there is a growing interest in electrodeless plasma thrusters that offer the opportunity of improved scalability, larger throttleability, running on different propellants, and limit device erosion. The majority of electrodeless designs rely on a magnetic nozzle (MN) for the acceleration of the plasma, which has the advantage of utilizing the expanding electrons to neutralize the ion beam without the additional installation of a cathode. The plasma expansion in the MN is nearly collisionless, and a fluid description of electrons requires a non-trivial closure relation. Kinetic electron effects, and in particular electron cooling, play a crucial role in various physical phenomena such as energy balance, ion acceleration, and particle detachment. Based on the experimental and theoretical studies conducted in recognition of this importance, the fundamental physics of the electron cooling mechanism revealed in MNs and magnetically expanding plasma are reviewed. Especially, recent approaches from the kinetic point of view are discussed, and our perspective on the future challenges of electron cooling and the relevant physical subject of MN is presented.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Measurement and Analysis of Thermal Conductivity of Ceramic Particle Beds for Solar Thermal Energy Storage
Authors:
Ka Man Chung,
Jian Zeng,
Sarath Reddy Adapa,
Tianshi Feng,
Malavika V. Bagepalli,
Peter G. Loutzenhiser,
Kevin J. Albrecht,
Clifford K. Ho,
Renkun Chen
Abstract:
A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature o…
▽ More
A systematic study was performed to measure the effective thermal conductivity of ceramic particle beds, a promising heat transfer and thermal energy storage media for concentrating solar power (CSP). The thermal conductivity of the ceramic particle beds was measured using a transient hot-wire (THW) method within a temperature range of room temperature to 700 oC, the target operating temperature of the next-generation CSP systems. Two different types of ceramic particles were examined: (1) CARBOBEAD HSP 40/70 and (2) CARBOBEAD CP 40/100 with the average particle sizes of ~ 400 μm and ~280 μm, respectively, and thermal conductivities ranging from ~0.25 W m-1 K-1 to ~0.50 W m-1 K-1 from 20 oC to 700 oC in both air and N2 gas. The gaseous pressure dependence of the thermal conductivity of the ceramic particle beds was also studied in the N2 environment to differentiate the contributions from gas conduction, solid conduction, and radiation. Calculations using the Zehner, Bauer, and Schlünder (ZBS) model showed good agreements with the measurements. Based on the model, it is concluded that the effective thermal conductivity of the packed particle beds is dominated by the gas conduction while the solid conduction and radiation contributes to about 20% of the effective thermal conductivity at high temperature.
△ Less
Submitted 5 May, 2021;
originally announced May 2021.
-
In-situ Thermal Transport Measurement of Flowing Fluid using Modulated Photothermal Radiometry
Authors:
Jian Zeng,
Ka Man Chung,
Sarath Reddy Adapa,
Tianshi Feng,
Renkun Chen
Abstract:
In situ thermal transport measurement of flowing fluid could be useful for the characterization and diagnosis of practical thermal systems such as fluid heat exchangers and thermal energy storage systems. Despite abundant reports on the ex-situ thermal conductivity measurement of stagnant fluids, a suitable technique for the thermal conductivity measurement of flowing fluid has been rarely reporte…
▽ More
In situ thermal transport measurement of flowing fluid could be useful for the characterization and diagnosis of practical thermal systems such as fluid heat exchangers and thermal energy storage systems. Despite abundant reports on the ex-situ thermal conductivity measurement of stagnant fluids, a suitable technique for the thermal conductivity measurement of flowing fluid has been rarely reported. This paper presents the thermal conductivity measurement of flowing fluid within a pipe using a non-contact modulated photothermal radiometry (MPR) technique, where the surface of the pipe is heated by an intensity-modulated laser and the heat diffuses into the fluid with suitable modulation frequency. We design a tube section with small wall thickness suitable for the MPR measurements to maximize the sensitivity of the thermal response to the fluid properties while minimizing the lateral heat spreading effect. Intrinsic thermal conductivity of different fluids was obtained within a proper range of frequency and flow velocity where the forced convection effect is negligible. The forced convection effect became prominent at high flowing velocity and at low modulation frequency, leading to overestimated thermal conductivity of fluid. It is found that the intrinsic thermal conductivity could be obtained when the flow velocity is less than 100 mm/sec and ReD1/2Pr1/3 < 100 for DI water and Xceltherm oil under the specified experimental conditions, where Re_D is the Reynolds number and Pr is the Prandtl number.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
Low-dose CT Enhancement Network with a Perceptual Loss Function in the Spatial Frequency and Image Domains
Authors:
Kevin J. Chung,
Roberto Souza,
Richard Frayne,
Ting-Yim Lee
Abstract:
We propose a dual-domain cascade of U-nets (i.e. a "W-net") operating in both the spatial frequency and image domains to enhance low-dose CT (LDCT) images without the need for proprietary x-ray projection data. The central slice theorem motivated the use of the spatial frequency domain in place of the raw sinogram. Data were obtained from the AAPM Low-dose Grand Challenge. A combination of Fourier…
▽ More
We propose a dual-domain cascade of U-nets (i.e. a "W-net") operating in both the spatial frequency and image domains to enhance low-dose CT (LDCT) images without the need for proprietary x-ray projection data. The central slice theorem motivated the use of the spatial frequency domain in place of the raw sinogram. Data were obtained from the AAPM Low-dose Grand Challenge. A combination of Fourier space (F) and/or image domain (I) U-nets and W-nets were trained with a multi-scale structural similarity and mean absolute error loss function to denoise filtered back projected (FBP) LDCT images while maintaining perceptual features important for diagnostic accuracy. Deep learning enhancements were superior to FBP LDCT images in quantitative and qualitative performance with the dual-domain W-nets outperforming single-domain U-net cascades. Our results suggest that spatial frequency learning in conjunction with image-domain processing can produce superior LDCT enhancement than image-domain-only networks.
△ Less
Submitted 26 May, 2020; v1 submitted 24 May, 2020;
originally announced May 2020.
-
Dual-domain Cascade of U-nets for Multi-channel Magnetic Resonance Image Reconstruction
Authors:
Roberto Souza,
Mariana Bento,
Nikita Nogovitsyn,
Kevin J. Chung,
R. Marc Lebel,
Richard Frayne
Abstract:
The U-net is a deep-learning network model that has been used to solve a number of inverse problems. In this work, the concatenation of two-element U-nets, termed the W-net, operating in k-space (K) and image (I) domains, were evaluated for multi-channel magnetic resonance (MR) image reconstruction. The two element network combinations were evaluated for the four possible image-k-space domain conf…
▽ More
The U-net is a deep-learning network model that has been used to solve a number of inverse problems. In this work, the concatenation of two-element U-nets, termed the W-net, operating in k-space (K) and image (I) domains, were evaluated for multi-channel magnetic resonance (MR) image reconstruction. The two element network combinations were evaluated for the four possible image-k-space domain configurations: a) W-net II, b) W-net KK, c) W-net IK, and d) W-net KI were evaluated. Selected promising four element networks (WW-nets) were also examined. Two configurations of each network were compared: 1) Each coil channel processed independently, and 2) all channels processed simultaneously. One hundred and eleven volumetric, T1-weighted, 12-channel coil k-space datasets were used in the experiments. Normalized root mean squared error, peak signal to noise ratio, visual information fidelity and visual inspection were used to assess the reconstructed images against the fully sampled reference images. Our results indicated that networks that operate solely in the image domain are better suited when processing individual channels of multi-channel data independently. Dual domain methods are more advantageous when simultaneously reconstructing all channels of multi-channel data. Also, the appropriate cascade of U-nets compared favorably (p < 0.01) to the previously published, state-of-the-art Deep Cascade model in in three out of four experiments.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Role of hubs in the synergistic spread of behavior
Authors:
Yongjoo Baek,
Kihong Chung,
Meesoon Ha,
Hawoong Jeong,
Daniel Kim
Abstract:
The spread of behavior in a society has two major features: the synergy of multiple spreaders and the dominance of hubs. While strong synergy is known to induce mixed-order transitions (MOTs) at percolation, the effects of hubs on the phenomena are yet to be clarified. By analytically solving the generalized epidemic process on random scale-free networks with the power-law degree distribution…
▽ More
The spread of behavior in a society has two major features: the synergy of multiple spreaders and the dominance of hubs. While strong synergy is known to induce mixed-order transitions (MOTs) at percolation, the effects of hubs on the phenomena are yet to be clarified. By analytically solving the generalized epidemic process on random scale-free networks with the power-law degree distribution $p_k \sim k^{-α}$, we clarify how the dominance of hubs in social networks affects the conditions for MOTs. Our results show that, for $α< 4$, an abundance of hubs drive MOTs, even if a synergistic spreading event requires an arbitrarily large number of adjacent spreaders. In particular, for $2 < α< 3$, we find that a global cascade is possible even when only synergistic spreading events are allowed. These transition properties are substantially different from those of cooperative contagions, which are another class of synergistic cascading processes exhibiting MOTs.
△ Less
Submitted 1 March, 2019; v1 submitted 28 September, 2018;
originally announced September 2018.
-
Testing the validity of the Lorentz factor
Authors:
H Broomfield,
J Hirst,
Theodoros Vafeiadis,
Markus Joos,
A Singh,
M Raven,
T K Chung,
J Harrow,
T Kwok,
J Li,
K Tsui,
A Tsui,
R Perkins,
H Mandelstam,
D Khoo,
J Southwell,
J Martin-Halls,
D Townsend,
H Watson
Abstract:
Our proposed experiment aimed to test the validity of the Lorentz factor with two methods: The time of flight (TOF) of various particles at different momenta and the decay rate of pions at different momenta. Due to the high sensitivity required for the second method the results were inconclusive, therefore we report only on the results of the first method.
Our proposed experiment aimed to test the validity of the Lorentz factor with two methods: The time of flight (TOF) of various particles at different momenta and the decay rate of pions at different momenta. Due to the high sensitivity required for the second method the results were inconclusive, therefore we report only on the results of the first method.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Feasibility Study of Neutron Dose for Real Time Image Guided Proton Therapy: A Monte Carlo Study
Authors:
** Sung Kim,
Jung Suk Shin,
Daehyun Kim,
EunHyuk Shin,
Kwangzoo Chung,
Sungkoo Cho,
Sung Hwan Ahn,
Sanggyu Ju,
Yoonsun Chung,
Sang Hoon Jung,
Youngyih Han
Abstract:
Two full rotating gantry with different nozzles (Multipurpose nozzle with MLC, Scanning Dedicated nozzle) with conventional cyclotron system is installed and under commissioning for various proton treatment options at Samsung Medical Center in Korea. The purpose of this study is to investigate neutron dose equivalent per therapeutic dose, H/D, to x-ray imaging equipment under various treatment con…
▽ More
Two full rotating gantry with different nozzles (Multipurpose nozzle with MLC, Scanning Dedicated nozzle) with conventional cyclotron system is installed and under commissioning for various proton treatment options at Samsung Medical Center in Korea. The purpose of this study is to investigate neutron dose equivalent per therapeutic dose, H/D, to x-ray imaging equipment under various treatment conditions with monte carlo simulation. At first, we investigated H/D with the various modifications of the beam line devices (Scattering, Scanning, Multi-leaf collimator, Aperture, Compensator) at isocenter, 20, 40, 60 cm distance from isocenter and compared with other research groups. Next, we investigated the neutron dose at x-ray equipments used for real time imaging with various treatment conditions. Our investigation showed the 0.07 ~ 0.19 mSv/Gy at x-ray imaging equipments according to various treatment options and intestingly 50% neutron dose reduction effect of flat panel detector was observed due to multi- leaf collimator during proton scanning treatment with multipurpose nozzle. In future studies, we plan to investigate experimental measurement of neutron dose and validation of simulation data for x-ray imaging equipment with additional neutron dose reduction method.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
The Proton Therapy Nozzles at Samsung Medical Center: A Monte Carlo Simulation Study using TOPAS
Authors:
Kwangzoo Chung,
**sung Kim,
Dae-Hyun Kim,
Sunghwan Ahn,
Youngyih Han
Abstract:
To expedite the commissioning process of the proton therapy system at Samsung Medical Center (SMC), we have developed a Monte Carlo simulation model of the proton therapy nozzles using TOPAS. At SMC proton therapy center, we have two gantry rooms with different types of nozzles; a multi-purpose nozzle and a dedicated scanning nozzle. Each nozzle has been modeled in detail following the geometry in…
▽ More
To expedite the commissioning process of the proton therapy system at Samsung Medical Center (SMC), we have developed a Monte Carlo simulation model of the proton therapy nozzles using TOPAS. At SMC proton therapy center, we have two gantry rooms with different types of nozzles; a multi-purpose nozzle and a dedicated scanning nozzle. Each nozzle has been modeled in detail following the geometry information provided by the manufacturer, Sumitomo Heavy Industries, Ltd. For this purpose, novel features of TOPAS, such as the time feature or the ridge filter class, have been used. And the appropriate physics models for proton nozzle simulation were defined. Dosimetric properties, like percent depth dose curve, spread-out Bragg peak (SOBP), beam spot size, have been simulated and verified against measured beam data. Beyond the Monte Carlo nozzle modeling, we have developed an interface between TOPAS and the treatment planning system (TPS), RayStation. An exported RT plan data from the TPS has been interpreted by the interface and then translated into the TOPAS input text. The developed Monte Carlo nozzle model can be used to estimate non-beam performance of the nozzles such as the neutron background. Furthermore, the nozzle model can be used to study mechanical optimization in the design of the nozzle.
△ Less
Submitted 29 May, 2015; v1 submitted 10 March, 2015;
originally announced March 2015.
-
Retrospective Estimation of the Quality of Intensity-Modulated Radiotherapy Plans for Lung Cancer
Authors:
Jihye Koo,
Myonggeun Yoon,
Weon Kuu Chung,
Dong Wook Kim
Abstract:
This study estimated the planning quality of intensity-modulated radiotherapy in 42 lung cancer cases to provide preliminary data for the development of a planning quality assurance algorithm. Organs in or near the thoracic cavity (ipsilateral lung, contralateral lung, heart, liver, esophagus, spinal cord, and bronchus) were selected as organs at risk (OARs). Radiotherapy plans were compared using…
▽ More
This study estimated the planning quality of intensity-modulated radiotherapy in 42 lung cancer cases to provide preliminary data for the development of a planning quality assurance algorithm. Organs in or near the thoracic cavity (ipsilateral lung, contralateral lung, heart, liver, esophagus, spinal cord, and bronchus) were selected as organs at risk (OARs). Radiotherapy plans were compared using the conformity index (CI), coverage index (CVI), and homogeneity index (HI) of the planning target volume (PTV), OAR-PTV distance and OAR-PTV overlap volume, and the V10Gy, V20Gy, and equivalent uniform dose (EUD) of the OARs. The CI, CVI, and HI of the PTV were 0.54 - 0.89 , 0.90 - 1.00 , and 0.11 - 0.41, respectively. The mean EUDs (V10Gy, V20Gy) of the ipsilateral lung, contralateral lung, esophagus, cord, liver, heart, and bronchus were 8.07 Gy (28.06, 13.17), 2.59 Gy (6.53, 1.18), 7.02 Gy (26.17, 12.32), 3.56 Gy (13.56, 4.48), 0.72 Gy (2.15, 0.91), 5.14 Gy (19.68, 8.62), and 10.56 Gy (36.08, 19.79), respectively. EUDs tended to decrease as OAR-PTV distance increased and OAR-PTV overlap volume decreased. Because the plans in this study were from a single department, relatively few people were involved in treatment planning. Differences in treatment results for a given patient would be much more pronounced if many departments were involved.
△ Less
Submitted 10 March, 2015;
originally announced March 2015.
-
Preliminary Study for Dosimetric Characteristics of 3D-printed Materials with Megavoltage Photons
Authors:
Seonghoon Jeong,
Myonggeun yoon,
Weon Kuu Chung,
Dong Wook Kim
Abstract:
In these days, 3D-printer is on the rise in various fields including radiation therapy. This preliminary study aimed to estimate the dose characteristics of the 3D-printer materials which could be used as the compensator or immobilizer in radiation treatment. The cubes which have 5cm length and different densities as 50%, 75% and 100% were printed by 3D-printer. A planning CT scans for cubes were…
▽ More
In these days, 3D-printer is on the rise in various fields including radiation therapy. This preliminary study aimed to estimate the dose characteristics of the 3D-printer materials which could be used as the compensator or immobilizer in radiation treatment. The cubes which have 5cm length and different densities as 50%, 75% and 100% were printed by 3D-printer. A planning CT scans for cubes were performed using a CT simulator (Brilliance CT, Philips Medical System, Netherlands). Dose distributions behind the cube were calculated when 6MV photon beam passed through cube. The dose response for 3D-printed cube, air and water were measured by using EBT3 film and 2D array detector. When results of air case were normalized to 100, dose calculated by TPS and measured dose of 50% and 75% cube were 96~99. Measured and calculated doses of water and 100% cube were 82~84. HU values of 50%, 75% and 100% were -910, -860 and -10, respectively. From these results, 3D-printer in radiotherapy could be used for medical purpose accurately.
△ Less
Submitted 10 March, 2015;
originally announced March 2015.
-
Generalized epidemic process on modular networks
Authors:
Kihong Chung,
Yongjoo Baek,
Daniel Kim,
Meesoon Ha,
Hawoong Jeong
Abstract:
Social reinforcement and modular structure are two salient features observed in the spreading of behavior through social contacts. In order to investigate the interplay between these two features, we study the generalized epidemic process on modular networks with equal-sized finite communities and adjustable modularity. Using the analytical approach originally applied to clique-based random networ…
▽ More
Social reinforcement and modular structure are two salient features observed in the spreading of behavior through social contacts. In order to investigate the interplay between these two features, we study the generalized epidemic process on modular networks with equal-sized finite communities and adjustable modularity. Using the analytical approach originally applied to clique-based random networks, we show that the system exhibits a bond-percolation type continuous phase transition for weak social reinforcement, whereas a discontinuous phase transition occurs for sufficiently strong social reinforcement. Our findings are numerically verified using the finite-size scaling analysis and the crossings of the bimodality coefficient.
△ Less
Submitted 22 May, 2014; v1 submitted 29 November, 2013;
originally announced December 2013.
-
Belle II Technical Design Report
Authors:
T. Abe,
I. Adachi,
K. Adamczyk,
S. Ahn,
H. Aihara,
K. Akai,
M. Aloi,
L. Andricek,
K. Aoki,
Y. Arai,
A. Arefiev,
K. Arinstein,
Y. Arita,
D. M. Asner,
V. Aulchenko,
T. Aushev,
T. Aziz,
A. M. Bakich,
V. Balagura,
Y. Ban,
E. Barberio,
T. Barvich,
K. Belous,
T. Bergauer,
V. Bhardwaj
, et al. (387 additional authors not shown)
Abstract:
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been pr…
▽ More
The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Atom Interferometry tests of the isotropy of post-Newtonian gravity
Authors:
Holger Mueller,
Sheng-wey Chiow,
Sven Herrmann,
Steven Chu,
Keng-Yeow Chung
Abstract:
We present a test of the local Lorentz invariance of post-Newtonian gravity by monitoring Earth's gravity with a Mach-Zehnder atom interferometer that features a resolution of about 8*10^(-9)g/Hz^(1/2), the highest reported thus far. Expressed within the standard model extension (SME) or Nordtvedt's anisotropic universe model, the analysis limits four coefficients describing anisotropic gravity…
▽ More
We present a test of the local Lorentz invariance of post-Newtonian gravity by monitoring Earth's gravity with a Mach-Zehnder atom interferometer that features a resolution of about 8*10^(-9)g/Hz^(1/2), the highest reported thus far. Expressed within the standard model extension (SME) or Nordtvedt's anisotropic universe model, the analysis limits four coefficients describing anisotropic gravity at the ppb level and three others, for the first time, at the 10ppm level. Using the SME we explicitly demonstrate how the experiment actually compares the isotropy of gravity and electromagnetism.
△ Less
Submitted 4 December, 2007; v1 submitted 19 October, 2007;
originally announced October 2007.
-
Development of a Smart Modulator and Efficiency Evaluation of 500-GeV e+e- C-Band Linear Collider
Authors:
J. S. Oh,
J. S. Bak,
M. H. Cho,
W. Namkung,
K. H. Chung,
T. Shintake,
H. Matsumoto
Abstract:
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders…
▽ More
An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders. A C-band smart modulator has been developed using a constant-current inverter power supply. The smart modulator provides 350-kV pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35 microseconds, and the repetition rate of 50 Hz. We also investigated the power efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by an optimized pulse transformer and the RF phase modulation. With pulsed klystrons of 60% power efficiency, it is possible to achieve the RF system efficiency of 32% with the wall-plug power of 170 MW.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.