Showing 1–37 of 37 results for author: Chong, K L

Spatial Distribution of Inertial Particles in Turbulent Taylor-Couette Flow

Authors: Hao Jiang, Zhi-ming Lu, Bo-fu Wang, Xiao-hui Meng, Jie Shen, Kai Leong Chong

Abstract: This study investigates the spatial distribution of inertial particles in turbulent Taylor-Couette flow. Direct numerical simulations are performed using a one-way coupled Eulerian-Lagrangian approach, with a fixed inner wall Reynolds number of 2500 for the carrier flow, while the particle Stokes number varies from 0.034 to 1 for the dispersed phase. We first examine the issue of preferential conc… ▽ More This study investigates the spatial distribution of inertial particles in turbulent Taylor-Couette flow. Direct numerical simulations are performed using a one-way coupled Eulerian-Lagrangian approach, with a fixed inner wall Reynolds number of 2500 for the carrier flow, while the particle Stokes number varies from 0.034 to 1 for the dispersed phase. We first examine the issue of preferential concentration of particles near the outer wall region. Employing two-dimensional (2D) Voronoi analysis, we observe a pronounced particle clustering with increasing $St$, particularly evident in regions of low fluid velocity. Additionally, we investigate the concentration balance equation, inspired by the work of johnson et al.(2020), to examine particle radial distribution. We discern the predominant sources of influence, namely biased sampling, turbophoresis, and centrifugal effects. Across all cases, centrifugal force emerges as the primary driver, causing particle migration towards the outer wall. Biased sampling predominantly affects smaller inertial particles, driving them towards the inner wall due to sampling within Taylor rolls with inward radial velocity. Conversely, turbophoresis primarily impacts larger inertial particles, inducing migration towards both walls where turbulent intensity is weaker compared to the bulk. With the revealed physics, our work provides a basis for predicting and controlling particle movement and distribution in industrial applications. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: 18 pages, 11 figures

High-order Finite-Volume Central Targeted ENO Family Scheme for Compressible Flows in Unstructured Meshes

Authors: Qihang Ma, Feng Feng, Kai Leong Chong, Jianzhao Wu, Zhiming Lu, Quan Zhou, Bofu Wang

Abstract: Due to its innovative weighting method, the high-order target ENO (TENO) system has shown tremendous potential for complicated flow prediction. For unstructured meshes, we have developed non-oscillatory central target ENO family schemes in this study. In comparison with standard WENO schemes, the compact directional stencils significantly enhance the possibility that one of them will be in smooth… ▽ More Due to its innovative weighting method, the high-order target ENO (TENO) system has shown tremendous potential for complicated flow prediction. For unstructured meshes, we have developed non-oscillatory central target ENO family schemes in this study. In comparison with standard WENO schemes, the compact directional stencils significantly enhance the possibility that one of them will be in smooth area. The scheme is inherently limited in size in order to simplify the directional stencils in implementation. Following an effective scale separation method, we employ the ENO-like stencil selection technique, which selects candidate reconstructions from large central stencils in smooth areas to enforce the ENO property and from small directional stencils at discontinuities to restore high-order accuracy. With the validation of a number of test cases, a detailed comparison of CWENO, TENO, CTENO and CTENOZ schemes was carried out to assess their performance based on accuracy, robustness, parallel scalability and run time. Our findings demonstrate high-order precision, lower numerical dissipation, and superior sharp shock-capturing performance of proposed CTENO and CTENOZ schemes. △ Less

Submitted 28 December, 2023; originally announced December 2023.

Numerical simulation of flow field and debris migration in extreme ultraviolet source vessel

Authors: Wen-Sheng Meng, Chao-Ben Zhao, Jian-Zhao Wu, Bo-Fu Wang, Quan Zhou, Kai Leong Chong

Abstract: Practical extreme ultraviolet (EUV) sources yield the desired 13.5 nm radiation but also generate debris, significantly limiting the lifespan of the collector mirror in lithography. In this study, we explore the role of buffer gas in transporting debris particles within a EUV source vessel using direct numerical simulations (DNS). Our study involves a 2m $\times$ 1m $\times$ 1m rectangular cavity… ▽ More Practical extreme ultraviolet (EUV) sources yield the desired 13.5 nm radiation but also generate debris, significantly limiting the lifespan of the collector mirror in lithography. In this study, we explore the role of buffer gas in transporting debris particles within a EUV source vessel using direct numerical simulations (DNS). Our study involves a 2m $\times$ 1m $\times$ 1m rectangular cavity with an injecting jet flow subjected to sideward outlet. Debris particles are introduced into the cavity with specified initial velocities, simulating a spherical radiating pattern with particle diameters ranging from 0.1 $μ$m to 1 $μ$m. Varying the inflow velocity (from $1$m/s to $50$m/s) of the buffer gas reveals a morphological transition in the flow field. At low inflow velocities, the flow remains steady, whereas higher inflow velocities induce the formation of clustered corner rolls. Upon reaching sufficiently high inflow velocities, the jet flow can penetrate the entire cavity, impacting the endwall. Interestingly, the resulting recirculation flow leads to the spontaneous formation of spiraling outflow. The distinct flow structures at various inflow velocities lead to distinct patterns of particle transport. For low-speed gas, it is efficient in expelling all particles smaller than 0.4 $μ$m, while for high-speed gas, those fine particles accumulate near the endwall and are challenging to be extracted. Our findings highlight the significance of controlling flow conditions for effective debris particle transport and clearance in diverse applications especially in EUV source vessels. △ Less

Submitted 6 December, 2023; v1 submitted 4 December, 2023; originally announced December 2023.

Journal ref: Physics of Fluids 36 (2024) 023322

Numerical study on the effects of fluid properties in electrohydrodynamic pulsating jet under constant voltage

Authors: Yaohui Lu, Songyi Zhong, Kai Leong Chong, Yang Yang, Tao Yue, Quan Zhang, Long Li

Abstract: Pulsating jet is one of the common working modes in electrohydrodynamic printing (EHDP) that process is highly affected by operating parameters and material properties. In this paper, the processes of pulsating jet for liquids with different physical properties were investigated using numerical simulation. An electrohydrodynamic solver was established, and a charge flux restricting step was adopte… ▽ More Pulsating jet is one of the common working modes in electrohydrodynamic printing (EHDP) that process is highly affected by operating parameters and material properties. In this paper, the processes of pulsating jet for liquids with different physical properties were investigated using numerical simulation. An electrohydrodynamic solver was established, and a charge flux restricting step was adopted to ensure a realistic distribution of free charges. Three various ejection regimes were observed in our simulations: oscillating cone (OC), choked jet (CJ), and stable cone-jet (SJ). We found that three dimensionless numbers relating to liquid properties determined the ejection regime: the Ohnesorge number, Q0εr/Q, and Q0/(QRe). Based on those dimensionless numbers, the roles of liquid properties on pulsating jet (OC and CJ) were analyzed. In OC, the break of the jet is due to the significant oscillation of the Taylor cone, which is mainly affected by viscosity and conductivity. In CJ, the jet emission is terminated by the excessive resistant force in the cone-jet transition region. For liquids with low and medium viscosity, the dominant resistant force is the polarization force or viscous force when εrRe is larger or smaller than 1, respectively. For high viscosity liquids, the viscous force always becomes the major resistance. These results further reveal the physical mechanism of pulsating jet and can be used to guide its application. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Vortex Dynamics in Rotating Rayleigh-Bénard Convection

Authors: Shan-Shan Ding, Guang-Yu Ding, Kai Leong Chong, Wen-Tao Wu, Ke-Qing Xia, **-Qiang Zhong

Abstract: We investigate the spatial distribution and dynamics of the vortices in rotating Rayleigh-Bénard convection in a reduced Rayleigh-number range $1.3{\le}Ra/Ra_{c}{\le}166$. Under slow rotations ($Ra{\gtrsim}10Ra_{c}$), the vortices are randomly distributed. The size-distribution of the Voronoi cells of the vortex centers is well described by the standard $Γ$ distribution. In this flow regime the vo… ▽ More We investigate the spatial distribution and dynamics of the vortices in rotating Rayleigh-Bénard convection in a reduced Rayleigh-number range $1.3{\le}Ra/Ra_{c}{\le}166$. Under slow rotations ($Ra{\gtrsim}10Ra_{c}$), the vortices are randomly distributed. The size-distribution of the Voronoi cells of the vortex centers is well described by the standard $Γ$ distribution. In this flow regime the vortices exhibit Brownian-type horizontal motion. The probability density functions of the vortex displacements are, however, non-Gaussian at short time scales. At modest rotating rates ($4Ra_{c}{\le}Ra{\lesssim}10Ra_{c}$) the centrifugal force leads to radial vortex motions, i.e., warm cyclones (cold anticyclones) moving towards (outward from) the rotation axis. The mean-square-displacements of the vortices increase faster than linearly at large time. This super-diffusive behavior can be satisfactorily explained by a Langevin model incorporating the centrifugal force. In the rapidly rotating regime ($1.6Ra_{c}{\le}Ra{\le}4Ra_{c}$) the vortices are densely distributed, with the size-distribution of their Voronoi cells differing significantly from the standard $Γ$ distribution. The hydrodynamic interaction of neighboring vortices results in formation of vortex clusters. Inside clusters the correlation of the vortex velocity fluctuations is scale free, with the correlation length being approximately $30\%$ of the cluster length. We examine the influence of cluster forming on the dynamics of individual vortex. Within clusters, cyclones exhibit inverse-centrifugal motion as they submit to the motion of strong anticyclones, while the velocity for outward motion of the anticyclones is increased. Our analysis show that the mobility of isolated vortices, scaled by their vorticity strength, is a simple power function of the Froude number. △ Less

Submitted 27 May, 2023; originally announced May 2023.

Flow structure transition in thermal vibrational convection

Authors: Xili Guo, Jianzhao Wu, Bofu Wang, Quan Zhou, Kai Leong Chong

Abstract: This study investigates the effect of vibration on the flow structure transitions in thermal vibrational convection (TVC) systems, which occur when a fluid layer with a temperature gradient is excited by vibration. Direct numerical simulations of TVC in a two-dimensional enclosed square box were performed over a range of dimensionless vibration amplitudes $0.001 \le a \le 0.3$ and angular frequenc… ▽ More This study investigates the effect of vibration on the flow structure transitions in thermal vibrational convection (TVC) systems, which occur when a fluid layer with a temperature gradient is excited by vibration. Direct numerical simulations of TVC in a two-dimensional enclosed square box were performed over a range of dimensionless vibration amplitudes $0.001 \le a \le 0.3$ and angular frequencies $10^{2} \le ω\le 10^{7}$, with a fixed Prandtl number of 4.38. The flow visualisation shows the transition behaviour of flow structure upon the varying frequency, characterising three distinct regimes, which are the periodic-circulation regime, columnar regime and columnar-broken regime. Different statistical properties are distinguished from the temperature and velocity fluctuations at the boundary layer and mid-height. Upon transition into the columnar regime, columnar thermal coherent structures are formed, in contrast to the periodic oscillating circulation. These columns are contributed by merging of thermal plumes near the boundary layer, and the resultant thermal updrafts remain at almost fixed lateral position, leading to a decrease in fluctuations. We further find that the critical point of this transition can be described nicely by the vibrational Rayleigh number $Ra_\mathrm{vib}$. As the frequency continues to increase, entering the so-called columnar-broken regime, the columnar structures are broken, and eventually the flow state becomes a large-scale circulation, characterised by a sudden increase in fluctuations. Finally, a phase diagram is constructed to summarise the flow structure transition over a wide range of vibration amplitude and frequency parameters. △ Less

Submitted 29 March, 2023; originally announced March 2023.

Comments: 14 pages, 9 figures

Human body heat shapes the pattern of indoor disease transmission

Authors: Chao-Ben Zhao, Jian-Zhao Wu, Bo-Fu Wang, Tienchong Chang, Quan Zhou, Kai Leong Chong

Abstract: Exhaled droplet and aerosol-mediated transmission of respiratory diseases, including SARS-CoV-2, is exacerbated in poorly ventilated environments where body heat-driven airflow prevails. Employing large-scale simulations, we reveal how the human body heat can potentially spread pathogenic species between occupants in a room. Morphological phase transition in airflow takes place as the distance bet… ▽ More Exhaled droplet and aerosol-mediated transmission of respiratory diseases, including SARS-CoV-2, is exacerbated in poorly ventilated environments where body heat-driven airflow prevails. Employing large-scale simulations, we reveal how the human body heat can potentially spread pathogenic species between occupants in a room. Morphological phase transition in airflow takes place as the distance between human heat sources is varied which shapes novel patterns of disease transmission: For sufficiently large distance, individual buoyant plume creates a natural barrier, forming a ``thermal armour'' that blocks suspension spread between occupants. However, for small distances, collective effect emerges and thermal plumes condense into super-structure, facilitating long-distance suspension transport via crossing between convection rolls. Our quantitative analysis demonstrates that infection risk increases significantly at critical distances due to collective behavior and phase transition. This highlights the importance of maintaining reasonable social distancing indoors to minimize viral particle transmission and offers new insights into the critical behavior of pathogen spread. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Buoyancy-driven attraction of active droplets

Authors: Yibo Chen, Kai Leong Chong, Haoran Liu, Roberto Verzicco, Detlef Lohse

Abstract: Active oil droplets in a liquid are believed to repel due to the Marangoni effect, while buoyancy effects caused by the density difference between the droplets, diffusing product, and ambient fluid are usually overlooked. Recent experiments have observed active droplet clustering phenomena due to buoyancy-driven convection (Kruger et al. Eur. Phys. J. E, vol. 39, 2016, pp.1-9). In this study, we n… ▽ More Active oil droplets in a liquid are believed to repel due to the Marangoni effect, while buoyancy effects caused by the density difference between the droplets, diffusing product, and ambient fluid are usually overlooked. Recent experiments have observed active droplet clustering phenomena due to buoyancy-driven convection (Kruger et al. Eur. Phys. J. E, vol. 39, 2016, pp.1-9). In this study, we numerically analyze the buoyancy effect in addition to Marangoni flow, characterized by Peclet number $Pe$. The buoyancy effects originate from (i) the density difference between the droplet and the ambient liquid, which is characterized by Galileo number $Ga$, and (ii) the density difference between the diffusing product (i.e. filled micelles) and the ambient liquid, characterized by a solutal Rayleigh number $Ra$. We analyze how the attracting and repulsing behavior depends on the control parameters $Pe$, $Ga$, and $Ra$. We find that while Marangoni flow causes repulsion, the buoyancy effect leads to attraction, and even collisions can take place at high Ra. We also observe a delayed collision as $Ga$ increases. Moreover, we derive that the attracting velocity, characterized by a Reynolds number $Re_d$, is proportional to $Ra^{1/4}/(l/R)$, where $l/R$ is the normalized distance by radius between neighboring droplets. Finally, we obtain repulsive velocity, characterized by $Re_{rep}$, as proportional to $PeRa^{-0.38}$. The balance of attractive and repulsive effects results in $Pe \sim Ra^{0.63}$, which agrees with the transition curve between regimes with and without collision. △ Less

Submitted 27 February, 2023; originally announced February 2023.

Unifying constitutive law of vibroconvective turbulence in microgravity

Authors: Ze-Lin Huang, Jian-Zhao Wu, Xi-Li Guo, Chao-Ben Zhao, Bo-Fu Wang, Kai Leong Chong, Quan Zhou

Abstract: The emergence of unified constitutive law is a hallmark of convective turbulence, i.e., $Nu \sim Ra^β$ with $β\approx 0.3$ in the classical and $β=1/2$ in the ultimate regime, where the Nusselt number $Nu$ measures the global heat transport and the Rayleigh number $Ra$ quantifies the strength of thermal forcing. In recent years, vibroconvective flows have been attractive due to its ability to driv… ▽ More The emergence of unified constitutive law is a hallmark of convective turbulence, i.e., $Nu \sim Ra^β$ with $β\approx 0.3$ in the classical and $β=1/2$ in the ultimate regime, where the Nusselt number $Nu$ measures the global heat transport and the Rayleigh number $Ra$ quantifies the strength of thermal forcing. In recent years, vibroconvective flows have been attractive due to its ability to drive flow instability and generate ``artificial gravity'', which have potential to effective heat and mass transport in microgravity. However, the existence of constitutive laws in vibroconvective turbulence remains unclear. To address this issue, we carry out direct numerical simulations in a wide range of frequencies and amplitudes, and report that the heat transport exhibits a universal scaling law $Nu \sim a^{-1} Re_\mathrm{os}^β$ where $a$ is the vibration amplitude, $Re_\mathrm{os}$ is the oscillational Reynolds number, and $β$ is the universal exponent. We find that the dynamics of boundary layers plays an essential role in vibroconvective heat transport, and the $Nu$-scaling exponent $β$ is determined by the competition between the thermal boundary layer (TBL) and vibration-induced oscillating boundary layer (OBL). Then a physical model is proposed to explain the change of scaling exponent from $β=2$ in the OBL-dominant regime to $β= 4/3$ in the TBL-dominant regime. We conclude that vibroconvective turbulence in microgravity defines a distinct universality class of convective turbulence. This work elucidates the emergence of universal constitutive laws in vibroconvective turbulence, and opens up a new avenue for generating a controllable effective heat transport under microgravity or even microfluidic environment in which gravity is nearly absent. △ Less

Submitted 13 December, 2023; v1 submitted 16 December, 2022; originally announced December 2022.

Comments: 18 pages, 3 figures

Towards realistic simulations of human cough: effect of droplet emission duration and spread angle

Authors: Mogeng Li, Kai Leong Chong, Chong Shen Ng, Prateek Bahl, Charitha M. de Silva, Roberto Verzicco, Con Doolan, C. Raina MacIntyre, Detlef Lohse

Abstract: Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exha… ▽ More Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exhalations. In this study, we report a unique comparison between datasets that have both detailed measurements of a real human cough using spirometer and particle tracking velocimetry, and direct numerical simulation at similar conditions. By examining the experimental data, we find that the injection velocity at the mouth is not uni-directional. Instead, the droplets are injected into various directions, with their trajectories forming a cone shape in space. Furthermore, we find that the period of droplet emissions is much shorter than that of the cough: experimental results indicate that the droplets with an initial diameter $\gtrsim 10μ$m are emitted within the first 0.05 s, whereas the cough duration is closer to 1 s. These two features (the spread in the direction of injection velocity and the short duration of droplet emission) are incorporated into our direct numerical simulation, leading to an improved agreement with the experimental measurements. Thus, to have accurate representations of human expulsions in respiratory models, it is imperative to include parametrisation of these two features. △ Less

Submitted 2 October, 2022; originally announced October 2022.

Journal ref: Int. J. Multiph. Flow 147 (2022) 103883

Turbulent Rayleigh-Bénard convection with bubbles attached to the plate

Authors: Hao-Ran Liu, Kai Leong Chong, Rui Yang, Roberto Verzicco, Detlef Lohse

Abstract: We numerically investigate turbulent Rayleigh-Bénard convection with gas bubbles attached to the hot plate, mimicking a core feature in electrolysis, catalysis, or boiling. The existence of bubbles on the plate reduces the global heat transfer due to the much lower thermal conductivity of gases as compared to liquids and changes the structure of the boundary layers. The numerical simulations are p… ▽ More We numerically investigate turbulent Rayleigh-Bénard convection with gas bubbles attached to the hot plate, mimicking a core feature in electrolysis, catalysis, or boiling. The existence of bubbles on the plate reduces the global heat transfer due to the much lower thermal conductivity of gases as compared to liquids and changes the structure of the boundary layers. The numerical simulations are performed in 3D at Prandtl number Pr=4.38 (water) and Rayleigh number $10^7\le Ra \le10^8$. For simplicity, we assume the bubbles to be equally-sized and having pinned contact lines. We vary the total gas-covered area fraction $0.18 \le S_0 \le 0.62$, the relative bubble height $0.02\le h/H \le0.05$ (where $H$ is the height of the Rayleigh-Bénard cell), the bubble number $40 \le n \le 144$, and their spatial distribution. In all cases, asymmetric temperature profiles are observed, which we quantitatively explain based on the heat flux conservation at each horizontal section. We further propose the idea of using an equivalent single-phase setup to mimic the system with attached bubbles. Based on this equivalence, we can calculate the heat transfer. Without introducing any free parameter, the predictions for the Nusselt number, the upper and lower thermal boundary layer thicknesses, and the mean centre temperature well agree with the numerical results. Finally, our predictions also work for the cases with much larger Pr (e.g. $400$), which indicates that our results can also be applied to predict the mass transfer in water electrolysis with bubbles attached to the electrode surface or in catalysis. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Comments: 12 pages, 6 figures

Droplet plume emission during plasmonic bubble growth in ternary liquids

Authors: Xiaolai Li, Yibo Chen, Yuliang Wang, Kai Leong Chong, Roberto Verzicco, Harold J. W. Zandvliet, Detlef Lohse

Abstract: Plasmonic bubbles are of great relevance in numerous applications, including catalytic reactions, micro/nanomanipulation of molecules or particles dispersed in liquids, and cancer therapeutics. So far, studies have been focused on bubble nucleation in pure liquids. Here we investigate plasmonic bubble nucleation in ternary liquids consisting of ethanol, water, and trans-anethole oil which can show… ▽ More Plasmonic bubbles are of great relevance in numerous applications, including catalytic reactions, micro/nanomanipulation of molecules or particles dispersed in liquids, and cancer therapeutics. So far, studies have been focused on bubble nucleation in pure liquids. Here we investigate plasmonic bubble nucleation in ternary liquids consisting of ethanol, water, and trans-anethole oil which can show the so-called ouzo-effect. We find that oil (trans-anethole) droplet plumes are produced around the growing plasmonic bubbles. The nucleation of the microdroplets and their organization in droplet plumes is due to the symmetry breaking of the ethanol concentration field during the selective evaporation of ethanol from the surrounding ternary liquids into the growing plasmonic bubbles. Numerical simulations show the existence of a critical Marangoni number Ma (the ratio between solutal advection rate and the diffusion rate), above which the symmetry breaking of the ethanol concentration field occurs, leading to the emission of the droplet plumes. The numerical results agree with the experimental observation that more plumes are emitted with increasing ethanol-water relative weight ratios and hence Ma. Our findings on the droplet plume formation reveal the rich phenomena of plasmonic bubble nucleation in multicomponent liquids and help to pave the way to achieve enhanced mixing in multicomponent liquids in chemical, pharmaceutical, and cosmetic industries. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Comments: 28 pages,12 figures

MSC Class: 76-05

Journal ref: Physical Review E 104 (2021), 025101

The effect of buoyancy driven convection on the growth and dissolution of bubbles on electrodes

Authors: Farzan Sepahi, Nakul Pande, Kai Leong Chong, Guido Mul, Roberto Verzicco, Detlef Lohse, Bastian T. Mei, Dominik Krug

Abstract: Enhancing the efficiency of water electrolysis, which can be severely impacted by the nucleation and growth of bubbles, is key in the energy transition. In this combined experimental and numerical study, in-situ bubble evolution and dissolution processes are imaged and compared to numerical simulations employing the immersed boundary method. We find that it is crucial to include solutal driven nat… ▽ More Enhancing the efficiency of water electrolysis, which can be severely impacted by the nucleation and growth of bubbles, is key in the energy transition. In this combined experimental and numerical study, in-situ bubble evolution and dissolution processes are imaged and compared to numerical simulations employing the immersed boundary method. We find that it is crucial to include solutal driven natural convection in order to represent the experimentally observed bubble behaviour even though such effects have commonly been neglected in modelling efforts so far. We reveal how the convective patterns depend on current densities and bubble spacings, leading to distinctively different bubble growth and shrinkage dynamics. Bubbles are seen to promote the convective instability if their spacing is large ($\geq4$mm for the present conditions), whereas the onset of convection is delayed if the inter-bubble distance is smaller. Our approach and our results can help devise efficient mass transfer solutions for gas evolving electrodes. △ Less

Submitted 27 November, 2021; v1 submitted 29 September, 2021; originally announced September 2021.

Comments: 30 pages, 13 figures

Heat transfer in turbulent Rayleigh-Bénard convection within two immiscible fluid layers

Authors: Hao-Ran Liu, Kai Leong Chong, Rui Yang, Roberto Verzicco, Detlef Lohse

Abstract: We numerically investigate turbulent Rayleigh-Bénard convection within two immiscible fluid layers, aiming to understand how the layer thickness and fluid properties affect the heat transfer (characterized by the Nusselt number $Nu$) in two-layer systems. Both two- and three-dimensional simulations are performed at fixed global Rayleigh number $Ra=10^8$, Prandtl number $Pr=4.38$, and Weber number… ▽ More We numerically investigate turbulent Rayleigh-Bénard convection within two immiscible fluid layers, aiming to understand how the layer thickness and fluid properties affect the heat transfer (characterized by the Nusselt number $Nu$) in two-layer systems. Both two- and three-dimensional simulations are performed at fixed global Rayleigh number $Ra=10^8$, Prandtl number $Pr=4.38$, and Weber number $We=5$. We vary the relative thickness of the upper layer between $0.01 \le α\le 0.99$ and the thermal conductivity coefficient ratio of the two liquids between $0.1 \le λ_k \le 10$. Two flow regimes are observed: In the first regime at $0.04\leα\le0.96$, convective flows appear in both layers and $Nu$ is not sensitive to $α$. In the second regime at $α\le0.02$ or $α\ge0.98$, convective flow only exists in the thicker layer, while the thinner one is dominated by pure conduction. In this regime, $Nu$ is sensitive to $α$. To predict $Nu$ in the system in which the two layers are separated by a unique interface, we apply the Grossmann-Lohse theory for both individual layers and impose heat flux conservation at the interface. Without introducing any free parameter, the predictions for $Nu$ and for the temperature at the interface well agree with our numerical results and previous experimental data. △ Less

Submitted 25 August, 2021; originally announced August 2021.

Comments: 13 pages, 6 figures

Journal ref: Journal of Fluid Mechanics 938, A31 (2022)

Enhancing Heat Transport in Multiphase Rayleigh-Bénard Turbulence by Changing the Plate-Liquid Contact Angles

Authors: Hao-Ran Liu, Kai Leong Chong, Chong Shen Ng, Roberto Verzicco, Detlef Lohse

Abstract: This numerical study presents a simple but extremely effective way to considerably enhance heat transport in turbulent multiphase flows, namely by using oleophilic walls. As a model system, we pick the Rayleigh-Bénard setup, filled with an oil-water mixture. For oleophilic walls, e.g. using only $10\%$ volume fraction of oil in water, we observe a remarkable heat transport enhancement of more th… ▽ More This numerical study presents a simple but extremely effective way to considerably enhance heat transport in turbulent multiphase flows, namely by using oleophilic walls. As a model system, we pick the Rayleigh-Bénard setup, filled with an oil-water mixture. For oleophilic walls, e.g. using only $10\%$ volume fraction of oil in water, we observe a remarkable heat transport enhancement of more than $100\%$ as compared to the pure water case. In contrast, for oleophobic walls, the enhancement is then only about $20\%$ as compared to pure water. The physical explanation of the highly-efficient heat transport for oleophilic walls is that thermal plumes detach from the oil-rich boundary layer and are transported together with the oil phase. In the bulk, the oil-water interface prevents the plumes to mix with the turbulent water bulk. To confirm this physical picture, we show that the minimum amount of oil to achieve the maximum heat transport is set by the volume fraction of the thermal plumes. Our findings provide guidelines of how to optimize heat transport in thermal turbulence. Moreover, the physical insight of how coherent structures are coupled with one phase of a two-phase system has very general applicability for controlling transport properties in other turbulent multiphase flows. △ Less

Submitted 23 May, 2022; v1 submitted 24 May, 2021; originally announced May 2021.

Comments: 11 pages, 4 figues

Journal ref: Journal of fluid mechanics 933, R1 (2022)

An efficient phase-field method for turbulent multiphase flows

Authors: Hao-Ran Liu, Chong Shen Ng, Kai Leong Chong, Detlef Lohse, Roberto Verzicco

Abstract: With the aim of efficiently simulating three-dimensional multiphase turbulent flows with a phase-field method, we propose a new discretization scheme for the biharmonic term (the 4th-order derivative term) of the Cahn-Hilliard equation. This novel scheme can significantly reduce the computational cost while retaining the same accuracy as the original procedure. Our phase-field method is built on t… ▽ More With the aim of efficiently simulating three-dimensional multiphase turbulent flows with a phase-field method, we propose a new discretization scheme for the biharmonic term (the 4th-order derivative term) of the Cahn-Hilliard equation. This novel scheme can significantly reduce the computational cost while retaining the same accuracy as the original procedure. Our phase-field method is built on top of a direct numerical simulation solver, named AFiD (www.afid.eu) and open-sourced by our research group. It relies on a pencil distributed parallel strategy and a FFT-based Poisson solver. To deal with large density ratios between the two phases, a pressure split method [1] has been applied to the Poisson solver. To further reduce computational costs, we implement a multiple-resolution algorithm which decouples the discretizations for the Navier-Stokes equations and the scalar equation: while a stretched wall-resolving grid is used for the Navier-Stokes equations, for the Cahn-Hilliard equation we use a fine uniform mesh. The present method shows excellent computational performance for large-scale computation: on meshes up to 8 billion nodes and 3072 CPU cores, a multiphase flow needs only slightly less than 1.5 times the CPU time of the single-phase flow solver on the same grid. The present method is validated by comparing the results to previous studies for the cases of drop deformation in shear flow, including the convergence test with mesh refinement, and breakup of a rising buoyant bubble with density ratio up to 1000. Finally, we simulate the breakup of a big drop and the coalescence of O(10^3) drops in turbulent Rayleigh-Bénard convection at a Rayleigh number of $10^8$, observing good agreement with theoretical results. △ Less

Submitted 5 May, 2021; originally announced May 2021.

Comments: 32 pages, 14 figures

Journal ref: Journal of Computational Physics, 446, 110659 (2021)

Periodic bouncing of a plasmonic bubble in a binary liquid by competing solutal and thermal Marangoni forces

Authors: Binglin Zeng, Kai Leong Chong, Yuliang Wang, Christian Diddens, Xiaolai Li, Marvin Detert, Harold J. W. Zandvliet, Detlef Lohse

Abstract: The physicochemical hydrodynamics of bubbles and droplets out of equilibrium, in particular with phase transitions, displays surprisingly rich and often counterintuitive phenomena. Here we experimentally and theoretically study the nucleation and early evolution of plasmonic bubbles in a binary liquid consisting of water and ethanol. Remarkably, the submillimeter plasmonic bubble is found to be pe… ▽ More The physicochemical hydrodynamics of bubbles and droplets out of equilibrium, in particular with phase transitions, displays surprisingly rich and often counterintuitive phenomena. Here we experimentally and theoretically study the nucleation and early evolution of plasmonic bubbles in a binary liquid consisting of water and ethanol. Remarkably, the submillimeter plasmonic bubble is found to be periodically attracted to and repelled from the nanoparticle-decorated substrate, with frequencies of around a few kHz. We identify the competition between solutal and thermal Marangoni forces as origin of the periodic bouncing. The former arises due to the selective vaporization of ethanol at the substrate's side of the bubble, leading to a solutal Marangoni flow towards the hot substrate, which pushes the bubble away. The latter arises due to the temperature gradient across the bubble, leading to a thermal Marangoni flow away from the substrate which sucks the bubble towards it. We study the dependence of the frequency of the bouncing phenomenon from the control parameters of the system, namely the ethanol fraction and the laser power for the plasmonic heating. Our findings can be generalized to boiling and electrolytically or catalytically generated bubbles in multicomponent liquids. △ Less

Submitted 20 April, 2021; originally announced April 2021.

Comments: 12 pages, 3 figures

MSC Class: 76-05

Optimal ventilation rate for effective displacement ventilation

Authors: Rui Yang, Chong Shen Ng, Kai Leong Chong, Roberto Verzicco, Detlef Lohse

Abstract: Indoor ventilation is essential for a healthy and comfortable living environment. A key issue is to discharge anthropogenic air contamination such as CO2 gas or, more seriously, airborne respiratory droplets. Here, by employing direct numerical simulations, we study the mechanical displacement ventilation with the realistic range of air changes per hour (ACH) from 1 to 10. For this ventilation sch… ▽ More Indoor ventilation is essential for a healthy and comfortable living environment. A key issue is to discharge anthropogenic air contamination such as CO2 gas or, more seriously, airborne respiratory droplets. Here, by employing direct numerical simulations, we study the mechanical displacement ventilation with the realistic range of air changes per hour (ACH) from 1 to 10. For this ventilation scheme, a cool lower zone is established beneath the warm upper zone with the interface height h depending on ACH. For weak ventilation, we find the scalings relation of the interface height h ~ ACH^{3/5}, as suggested by Hunt & Linden (Build. Environ., vol. 34, 1999, pp. 707-720). Also, the CO2 concentration decreases with ACH within this regime. However, for too strong ventilation, the interface height h becomes insensitive to ACH, and the CO2 concentration remains unchanged. Our results are in contrast to the general belief that stronger flow is more helpful to remove contaminants. We work out the physical mechanism governing the transition between the low ACH and the high ACH regimes. It is determined by the relative strength of the kinetic energy from the inflow, potential energy from the stably-stratified layers, and energy loss due to drag. Our findings provide a physics-based guideline to optimize displacement ventilation. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 10 pages, 5 figures

Universality in microdroplet nucleation during solvent exchange in Hele-Shaw like channels

Authors: Yanshen Li, Kai Leong Chong, Hanieh Bazyar, Rob G. H. Lammertink, Detlef Lohse

Abstract: Micro and nanodroplets have many important applications such as in drug delivery, liquid-liquid extraction, nanomaterial synthesis and cosmetics. A commonly used method to generate a large number of micro or nanodroplets in one simple step is solvent exchange (also called nanoprecipitation), in which a good solvent of the droplet phase is displaced by a poor one, generating an oversaturation pulse… ▽ More Micro and nanodroplets have many important applications such as in drug delivery, liquid-liquid extraction, nanomaterial synthesis and cosmetics. A commonly used method to generate a large number of micro or nanodroplets in one simple step is solvent exchange (also called nanoprecipitation), in which a good solvent of the droplet phase is displaced by a poor one, generating an oversaturation pulse that leads to droplet nucleation. Despite its crucial importance, the droplet growth resulting from the oversaturation pulse in this ternary system is still poorly understood. We experimentally and theoretically study this growth in Hele-Shaw like channels by measuring the total volume of the oil droplets that nucleates out of it. In order to prevent the oversaturated oil from exiting the channel, we decorated some of the channels with a porous region in the middle. Solvent exchange is performed with various solution compositions, flow rates and channel geometries, and the measured droplets volume is found to increase with the Péclet number $Pe$ with an approximate effective power law $V\propto Pe^{0.50}$. A theoretical model is developed to account for this finding. With this model we can indeed explain the $V\propto Pe^{1/2}$ scaling, including the prefactor, which can collapse all data of the "porous" channels onto one universal curve, irrespective of channel geometry and composition of the mixtures. Our work provides a macroscopic approach to this bottom-up method of droplet generation and may guide further studies on oversaturation and nucleation in ternary systems. △ Less

Submitted 15 February, 2021; v1 submitted 19 December, 2020; originally announced December 2020.

Comments: Published in Journal of Fluid Mechanics. 16 pages, 6 figures

Growth of respiratory droplets in cold and humid air

Authors: Chong Shen Ng, Kai Leong Chong, Rui Yang, Mogeng Li, Roberto Verzicco, Detlef Lohse

Abstract: The ambient conditions surrounding liquid droplets determine their growth or shrinkage. However, the precise fate of a liquid droplet expelled from a respiratory puff as dictated by its surroundings and the puff itself has not yet been fully quantified. From the view of airborne disease transmission, such as SARS-CoV-2, knowledge of such dependencies are critical. Here we employ direct numerical s… ▽ More The ambient conditions surrounding liquid droplets determine their growth or shrinkage. However, the precise fate of a liquid droplet expelled from a respiratory puff as dictated by its surroundings and the puff itself has not yet been fully quantified. From the view of airborne disease transmission, such as SARS-CoV-2, knowledge of such dependencies are critical. Here we employ direct numerical simulations (DNS) of a turbulent respiratory vapour puff and account for the mass and temperature exchange with respiratory droplets and aerosols. In particular, we investigate how droplets respond to different ambient temperatures and relative humidity (RH) by tracking their Lagrangian statistics. We reveal and quantify that in cold and humid environments, as there the respiratory puff is supersaturated, expelled droplets can first experience significant growth, and only later followed by shrinkage, in contrast to the monotonic shrinkage of droplets as expected from the classical view by William F. Wells (1934). Indeed, cold and humid environments diminish the ability of air to hold water vapour, thus causing the respiratory vapour puff to super-saturate. Consequently, the super-saturated vapour field drives the growth of droplets that are caught and transported within the humid puff. To analytically predict the likelihood for droplet growth, we propose a model for the axial RH based on the assumption of a quasi-stationary jet. Our model correctly predicts super-saturated RH conditions and is in good quantitative agreement with our DNS. Our results culminate in a temperature-RH map that can be employed as an indicator for droplet growth or shrinkage. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: 7 pages, 6 figures

Inverse centrifugal effect induced by collective motion of vortices in rotating turbulent convection

Authors: Shan-Shan Ding, Kai Leong Chong, Jun-Qiang Shi, Guang-Yu Ding, Hao-Yuan Lu, Ke-Qing Xia, **-Qiang Zhong

Abstract: When a fluid system is subject to strong rotation, centrifugal fluid motion is expected, i.e., denser (lighter) fluid moves outward (inward) from (toward) the axis of rotation. Here we demonstrate, both experimentally and numerically, the existence of an unexpected outward motion of warm and lighter vortices in rotating turbulent convection. This anomalous vortex motion occurs under rapid rotation… ▽ More When a fluid system is subject to strong rotation, centrifugal fluid motion is expected, i.e., denser (lighter) fluid moves outward (inward) from (toward) the axis of rotation. Here we demonstrate, both experimentally and numerically, the existence of an unexpected outward motion of warm and lighter vortices in rotating turbulent convection. This anomalous vortex motion occurs under rapid rotations when the centrifugal buoyancy is sufficiently strong to induce a symmetry-breaking in the vorticity field, i.e., the vorticity of the cold anticyclones overrides that of the warm cyclones. We show that through hydrodynamic interactions the densely populated vortices can self-aggregate into coherent clusters and exhibit collective motion in this flow regime. Interestingly, the correlation of the vortex velocity fluctuations within a cluster is scale-free, with the correlation length being about 30% of the cluster length. Such long-range correlation leads to the collective outward motion of cyclones. Our study provides new understanding of vortex dynamics that are widely present in nature. △ Less

Submitted 29 October, 2020; originally announced October 2020.

Extended lifetime of respiratory droplets in a turbulent vapour puff and its implications on airborne disease transmission

Authors: Kai Leong Chong, Chong Shen Ng, Naoki Hori, Rui Yang, Roberto Verzicco, Detlef Lohse

Abstract: To quantify the fate of respiratory droplets under different ambient relative humidities, direct numerical simulations of a typical respiratory event are performed. We found that, because small droplets (with initial diameter of 10um) are swept by turbulent eddies in the expelled humid puff, their lifetime gets extended by a factor of more than 30 times as compared to what is suggested by the clas… ▽ More To quantify the fate of respiratory droplets under different ambient relative humidities, direct numerical simulations of a typical respiratory event are performed. We found that, because small droplets (with initial diameter of 10um) are swept by turbulent eddies in the expelled humid puff, their lifetime gets extended by a factor of more than 30 times as compared to what is suggested by the classical picture by William F. Wells, for 50% relative humidity. With increasing ambient relative humidity the extension of the lifetimes of the small droplets further increases and goes up to around 150 times for 90% relative humidity, implying more than two meters advection range of the respiratory droplets within one second. Employing Lagrangian statistics, we demonstrate that the turbulent humid respiratory puff engulfs the small droplets, leading to many orders of magnitude increase in their lifetimes, implying that they can be transported much further during the respiratory events than the large ones. Our findings provide the starting points for larger parameter studies and may be instructive for develo** strategies on optimizing ventilation and indoor humidity control. Such strategies are key in mitigating the COVID-19 pandemic in the present autumn and upcoming winter. △ Less

Submitted 3 February, 2021; v1 submitted 4 August, 2020; originally announced August 2020.

Comments: 7 pages, 4 figures, published in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 126, 034502 (2021)

Instabilities driven by diffusio-phoretic flow on catalytic surfaces

Authors: Yibo Chen, Kai Leong Chong, Luoqin Liu, Roberto Verzicco, Detlef Lohse

Abstract: We theoretically and numerically investigate the instabilities driven by diffusiophoretic flow, caused by a solutal concentration gradient along a reacting surface. The important control parameter is the Peclet number Pe, which quantifies the ratio of the solutal advection rate to the diffusion rate. First, we study the diffusiophoretic flow on a catalytic plane in two dimensions. From a linear st… ▽ More We theoretically and numerically investigate the instabilities driven by diffusiophoretic flow, caused by a solutal concentration gradient along a reacting surface. The important control parameter is the Peclet number Pe, which quantifies the ratio of the solutal advection rate to the diffusion rate. First, we study the diffusiophoretic flow on a catalytic plane in two dimensions. From a linear stability analysis, we obtain that for Pe larger than 8pi, mass transport by convection overtakes that by diffusion, and a symmetry-breaking mode arises, which is consistent with numerical results. For even larger Pe, non-linear terms become important. For Pe larger than 16pi, multiple concentration plumes are emitted from the catalytic plane, which eventually merges into a single larger one. When Pe is even larger, there are continuous emissions and merging events of the concentration plumes. This newly-found flow state reflects the non-linear saturation of the system. The critical Peclet number for the transition to this state depends on Schmidt number Sc. In the second part of the paper, we conduct three-dimensional simulations for spherical catalytic particles, and beyond a critical Peclet number again find continuous plume emission and plume merging, now leading to chaotic motion of the phoretic particle. Our results thus help to understand the experimentally observed chaotic motion of catalytic particles in the high Pe regime. △ Less

Submitted 22 April, 2021; v1 submitted 12 July, 2020; originally announced July 2020.

From Rayleigh-Bénard convection to porous-media convection: how porosity affects heat transfer and flow structure

Authors: Shuang Liu, Linfeng Jiang, Kai Leong Chong, Xiaojue Zhu, Zhen-Hua Wan, Roberto Verzicco, Richard J. A. M. Stevens, Detlef Lohse, Chao Sun

Abstract: We perform a numerical study of the heat transfer and flow structure of Rayleigh-Bénard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity $φ$ in the flow properties during the transition process from the traditional RB convection with $φ=1$ (so no obstacles included) t… ▽ More We perform a numerical study of the heat transfer and flow structure of Rayleigh-Bénard (RB) convection in (in most cases regular) porous media, which are comprised of circular, solid obstacles located on a square lattice. This study is focused on the role of porosity $φ$ in the flow properties during the transition process from the traditional RB convection with $φ=1$ (so no obstacles included) to Darcy-type porous-media convection with $φ$ approaching 0. Simulations are carried out in a cell with unity aspect ratio, for the Rayleigh number $Ra$ from $10^5$ to $10^{10}$ and varying porosities $φ$, at a fixed Prandtl number $Pr=4.3$, and we restrict ourselves to the two dimensional case. For fixed $Ra$, the Nusselt number $Nu$ is found to vary non-monotonously as a function of $φ$; namely, with decreasing $φ$, it first increases, before it decreases for $φ$ approaching 0. The non-monotonous behaviour of $Nu(φ)$ originates from two competing effects of the porous structure on the heat transfer. On the one hand, the flow coherence is enhanced in the porous media, which is beneficial for the heat transfer. On the other hand, the convection is slowed down by the enhanced resistance due to the porous structure, leading to heat transfer reduction. For fixed $φ$, depending on $Ra$, two different heat transfer regimes are identified, with different effective power-law behaviours of $Nu$ vs $Ra$, namely, a steep one for low $Ra$ when viscosity dominates, and the standard classical one for large $Ra$. The scaling crossover occurs when the thermal boundary layer thickness and the pore scale are comparable. The influences of the porous structure on the temperature and velocity fluctuations, convective heat flux, and energy dissipation rates are analysed, further demonstrating the competing effects of the porous structure to enhance or reduce the heat transfer. △ Less

Submitted 19 May, 2020; originally announced May 2020.

Journal ref: J. Fluid Mech. (2020), vol. 895, A18

Two-layer Thermally Driven Turbulence: Mechanisms for Interface Breakup

Authors: Hao-Ran Liu, Kai Leong Chong, Qi Wang, Chong Shen Ng, Roberto Verzicco, Detlef Lohse

Abstract: It is commonly accepted that the breakup criteria of drops or bubbles in turbulence is governed by surface tension and inertia. However, also {\it{buoyancy}} can play an important role at breakup. In order to better understand this role, here we numerically study Rayleigh-Bénard convection for two immiscible fluid layers, in order to identify the effects of buoyancy on interface breakup. We explor… ▽ More It is commonly accepted that the breakup criteria of drops or bubbles in turbulence is governed by surface tension and inertia. However, also {\it{buoyancy}} can play an important role at breakup. In order to better understand this role, here we numerically study Rayleigh-Bénard convection for two immiscible fluid layers, in order to identify the effects of buoyancy on interface breakup. We explore the parameter space spanned by the Weber number $5\leq We \leq 5000$ (the ratio of inertia to surface tension) and the density ratio between the two fluids $0.001 \leq Λ\leq 1$, at fixed Rayleigh number $Ra=10^8$ and Prandtl number $Pr=1$. At low $We$, the interface undulates due to plumes. When $We$ is larger than a critical value, the interface eventually breaks up. Depending on $Λ$, two breakup types are observed: The first type occurs at small $Λ\ll 1$ (e.g. air-water systems) when local filament thicknesses exceed the Hinze length scale. The second, strikingly different, type occurs at large $Λ$ with roughly $0.5 < Λ\le 1$ (e.g. oil-water systems): The layers undergo a periodic overturning caused by buoyancy overwhelming surface tension. For both types the breakup criteria can be derived from force balance arguments and show good agreement with the numerical results. △ Less

Submitted 17 November, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Comments: 13 pages, 7 figures

Journal ref: Journal of Fluid Mechanics 913, A9 (2021)

From zonal flow to convection rolls in Rayleigh-Bénard convection with free-slip plates

Authors: Qi Wang, Kai Leong Chong, Richard J. A. M. Stevens, Roberto Verzicco, Detlef Lohse

Abstract: Rayleigh-Bénard (RB) convection with free-slip plates and horizontally periodic boundary conditions is investigated using direct numerical simulations. Two configurations are considered, one is two-dimension (2D) RB convection and the other one three-dimension (3D) RB convection with a rotating axis parallel to the plate. We explore the parameter range of Rayleigh numbers Ra from $10^7 to $10^9… ▽ More Rayleigh-Bénard (RB) convection with free-slip plates and horizontally periodic boundary conditions is investigated using direct numerical simulations. Two configurations are considered, one is two-dimension (2D) RB convection and the other one three-dimension (3D) RB convection with a rotating axis parallel to the plate. We explore the parameter range of Rayleigh numbers Ra from $10^7 to $10^9$ and Prandtl numbers $Pr$ from $1$ to $100$. We show that zonal flow, which was observed, for example, by Goluskin \emph{et al}. \emph{J. Fluid. Mech.} 759, 360-385 (2014) for $Γ=2$, is only stable when $Γ$ is smaller than a critical value, which depends on $Ra$ and $Pr$. With increasing $Γ$, we find a second regime in which both zonal flow and different convection roll states can be statistically stable. For even larger $Γ$, in a third regime, only convection roll states are statistically stable and zonal flow is not sustained. For the 3D simulations, we fix $Ra=10^7$ and $Pr=0.71$, and compare the flow for $Γ=8$ and $Γ= 16$. We demonstrate that with increasing aspect ratio $Γ$, zonal flow, which was observed for small $Γ=2π$ by von Hardenberg \emph{et al}. \emph{Phys. Rev. Lett.} 15, 134501 (2015), completely disappears for $Γ=16$. For such large $Γ$ only convection roll states are statistically stable. In between, here for medium aspect ratio $Γ= 8$, the convection roll state and the zonal flow state are both statistically stable. What state is taken depends on the initial conditions, similarly as we found for the 2D case. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Comments: 26 pages, 12 figures

Periodically modulated thermal convection

Authors: Rui Yang, Kai Leong Chong, Qi Wang, Roberto Verzicco, Olga Shishkina, Detlef Lohse

Abstract: Many natural and industrial turbulent flows are subjected to time-dependent boundary conditions. Despite being ubiquitous, the influence of temporal modulations (with frequency $f$) on global transport properties has hardly been studied. Here, we perform numerical simulations of Rayleigh-Bénard (RB) convection with time periodic modulation in the temperature boundary condition and report how this… ▽ More Many natural and industrial turbulent flows are subjected to time-dependent boundary conditions. Despite being ubiquitous, the influence of temporal modulations (with frequency $f$) on global transport properties has hardly been studied. Here, we perform numerical simulations of Rayleigh-Bénard (RB) convection with time periodic modulation in the temperature boundary condition and report how this modulation can lead to a significant heat flux (Nusselt number $\rm{Nu}$) enhancement. Using the concept of Stokes thermal boundary layer, we can explain the onset frequency of the Nu enhancement and the optimal frequency at which Nu is maximal, and how they depend on the Rayleigh number Ra and Prandtl number $\rm{Pr}$. From this, we construct a phase diagram in the 3D parameter space ($f$, $\rm{Ra}$, $\rm{Pr}$) and identify: (i) a regime where the modulation is too fast to affect $\rm{Nu}$; (ii) a moderate modulation regime, where $\rm{Nu}$ increases with decreasing $f$ and (iii) slow modulation regime, where $\rm{Nu}$ decreases with further decreasing $f$. Our findings provide a framework to study other types of turbulent flows with time-dependent forcing. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 5 pages, 5 figures. R. Y. and K. L. C. contributed equally to this work

Journal ref: Phys. Rev. Lett. 125, 154502 (2020)

Café Latte: Spontaneous layer formation in laterally cooled double diffusive convection

Authors: K. L. Chong, R. Yang, Q. Wang, R. Verzicco, D. Lohse

Abstract: In the preparation of Café Latte, spectacular layer formation can occur between the expresso shot in a glass of milk and the milk itself. Xue et al. (Nat. Commun., vol. 8, 2017, pp. 1-6) showed that the injection velocity of expresso determines the depth of coffee-milk mixture. After a while when a stable stratification forms in the mixture, the layering process can be modelled as a double diffusi… ▽ More In the preparation of Café Latte, spectacular layer formation can occur between the expresso shot in a glass of milk and the milk itself. Xue et al. (Nat. Commun., vol. 8, 2017, pp. 1-6) showed that the injection velocity of expresso determines the depth of coffee-milk mixture. After a while when a stable stratification forms in the mixture, the layering process can be modelled as a double diffusive convection system with a stably-stratified coffee-milk mixture cooled from the side. More specifically, we perform (two-dimensional) direct numerical simulations of laterally cooled double diffusive convection for a wide parameter range, where the convective flow is driven by a lateral temperature gradient while stabilized by a vertical concentration gradient. When the thermal driving force dominates over the stabilizing force, the flow behaves like vertical convection in which a large-scale circulation develops. However, with increasing strength of the stabilizing force, a meta-stable layered regime emerges. Initially, several vertically-stacked convection rolls develop, and these well-mixed layers are separated by sharp interfaces with large concentration gradients. The initial thickness of these emerging layers can be estimated by balancing the work exerted by thermal driving and the required potential energy to bring fluid out of its equilibrium position in the stably stratified fluid. In the layered regime, we further observe successive layer merging, and eventually only a single convection roll remains. We elucidate the following merging mechanism: As weakened circulation leads to accumulation of hot fluid adjacent to the hot sidewall, larger buoyancy forces associated with hotter fluid eventually break the layer interface. Then two layers merge into a larger layer, and circulation establishes again within the merged structure. △ Less

Submitted 26 April, 2020; originally announced April 2020.

Comments: 10 pages, 4 figures

Subcritical behaviour in double diffusive convection within the diffusive regime

Authors: Kai Leong Chong, Rui Yang, Yantao Yang, Roberto Verzicco, Detlef Lohse

Abstract: We conduct two- and three-dimensional simulations for double diffusive convection in the diffusive regime, where the fluid flow is driven by a destabilizing temperature gradient and stabilized by a stably stratified salinity gradient. We study how the heat flux, Reynolds number, and flow structures change with the density ratio $Λ$, which is the ratio of the buoyancy force induced by the salinity… ▽ More We conduct two- and three-dimensional simulations for double diffusive convection in the diffusive regime, where the fluid flow is driven by a destabilizing temperature gradient and stabilized by a stably stratified salinity gradient. We study how the heat flux, Reynolds number, and flow structures change with the density ratio $Λ$, which is the ratio of the buoyancy force induced by the salinity gradient to that by the temperature gradient. When $Λ$ increases from zero, the flow first behaves similarly as in pure Rayleigh-Bénard (RB) convection, both with respect to flow structure and to heat transport. The linear stability analysis of Baines & Gill (J. Fluid Mech., vol. 37, 1969, pp. 289-306) had estimated the critical density ratio $Λ_c$, above which the flow becomes stable. However, here we show that by using a large-scale circulation as initial condition (rather than the linear profiles assumed in the linear stability analysis), DDC in the diffusive regime can exhibit subcritical behaviour when $Λ> Λ_c$, i.e., coexistence of states at the same control parameters. Even though the density ratio becomes thousands times that of the critical value $Λ_c$, there is still convection with strongly enhanced heat transfer properties compared to the pure conduction case. We reveal the corresponding flow structures and find an unstably-stratified region sandwiched between two stably-stratified layers. Our results demonstrate the importance of the initial condition for DDC in the diffusive regime, especially in the situation of a large density ratio, which occurs in high-latitude ocean regions. △ Less

Submitted 27 March, 2020; originally announced March 2020.

Comments: 17 pages, 10 figures, submitted to Journal of Fluid Mechanics

Convection-dominated dissolution for single and multiple immersed sessile droplets

Authors: Kai Leong Chong, Yanshen Li, Chong Shen Ng, Roberto Verzicco, Detlef Lohse

Abstract: We numerically investigate both single and multiple droplet dissolution with droplets consisting of lighter liquid dissolving in a denser host liquid. The significance of buoyancy is quantified by the Rayleigh number Ra which is the buoyancy force over the viscous dam** force. In this study, Ra spans almost four decades from 0.1 to 400. We focus on how the mass flux, characterized by the Sherwoo… ▽ More We numerically investigate both single and multiple droplet dissolution with droplets consisting of lighter liquid dissolving in a denser host liquid. The significance of buoyancy is quantified by the Rayleigh number Ra which is the buoyancy force over the viscous dam** force. In this study, Ra spans almost four decades from 0.1 to 400. We focus on how the mass flux, characterized by the Sherwood number Sh, and the flow morphologies depend on Ra. For single droplet dissolution, we first show the transition of the Sh(Ra) scaling from a constant value to $Sh\sim Ra^{1/4}$, which confirms the experimental results by Dietrich et al. (J. Fluid Mech., vol. 794, 2016, pp. 45--67). The two distinct regimes, namely the diffusively- and the convectively-dominated regime, exhibit different flow morphologies: when Ra>=10, a buoyant plume is clearly visible which contrasts sharply to the pure diffusion case at low Ra. For multiple droplet dissolution, the well-known shielding effect comes into play at low Ra so that the dissolution rate is slower as compared to the single droplet case. However, at high Ra, convection becomes more and more dominant so that a collective plume enhances the mass flux, and remarkably the multiple droplets dissolve faster than a single droplet. This has also been found in the experiments by Laghezza et al. (Soft Matter, vol. 12, 2016, pp. 5787--5796). We explain this enhancement by the formation of a single, larger plume rather than several individual plumes. Moreover, there is an optimal Ra at which the enhancement is maximized, because the single plume is narrower at larger Ra, which thus hinders the enhancement. Our findings demonstrate a new mechanism in collective droplet dissolution, which is the merging of the plumes, that leads to non-trivial phenomena, contrasting the shielding effect. △ Less

Submitted 29 November, 2019; originally announced November 2019.

Comments: 18 pages, 11 figures, submitted to JFM

Anomalous vortex motion induced by asymmetric vorticity distribution in rapidly rotating thermal convection

Authors: Shan-Shan Ding, Kai Leong Chong, Jun-Qiang Shi, Guang-Yu Ding, Hao-Yuan Lu, Ke-Qing Xia, **-Qiang Zhong

Abstract: In rotating Rayleigh-Bénard convection, columnar vortices advect horizontally in a stochastic manner. When the centrifugal buoyancy is present the vortices exhibit radial motions that can be explained through a Langevin-type stochastic model. Surprisingly, anomalous outward motion of cyclones is observed in a centrifugation-dominant flow regime, which is contrary to the well-known centrifugal effe… ▽ More In rotating Rayleigh-Bénard convection, columnar vortices advect horizontally in a stochastic manner. When the centrifugal buoyancy is present the vortices exhibit radial motions that can be explained through a Langevin-type stochastic model. Surprisingly, anomalous outward motion of cyclones is observed in a centrifugation-dominant flow regime, which is contrary to the well-known centrifugal effect. We interpret this phenomenon as a symmetry-breaking of both the population and vorticity magnitude of the vortices brought about by the centrifugal buoyancy. Consequently, the cyclones submit to the collective vortex motion dominated by the strong anticyclones. Our study provides new understanding of vortex motions that are widely present in many natural systems. △ Less

Submitted 9 July, 2019; v1 submitted 4 June, 2019; originally announced June 2019.

Crossover from ballistic to diffusive vortex motion in convection

Authors: Kai Leong Chong, Jun-Qiang Shi, Shanshan Ding, Guang-Yu Ding, Hao-Yuan Lu, **-Qiang Zhong, Ke-Qing Xia

Abstract: Vortices play an unique role in heat and momentum transports in astro- and geo-physics, and it is also the origin of the Earth's dynamo. A question existing for a long time is whether the movement of vortices can be predicted or understood based on their historical data. Here we use both the experiments and numerical simulations to demonstrate some generic features of vortex motion and distributio… ▽ More Vortices play an unique role in heat and momentum transports in astro- and geo-physics, and it is also the origin of the Earth's dynamo. A question existing for a long time is whether the movement of vortices can be predicted or understood based on their historical data. Here we use both the experiments and numerical simulations to demonstrate some generic features of vortex motion and distribution. It can be found that the vortex movement can be described on the framework of Brownian particles where they move ballistically for the time shorter than some critical timescales, and then move diffusively. Traditionally, the inertia of vortex has often been neglected when one accounts for their motion, our results imply that vortices actually have inertial-induced memory such that their short term movement can be predicted. Extending to astro- and geo-physics, the critical timescales of transition are in the order of minutes for vortices in atmosphere and ocean, in which this inertial effect may often be neglected compared to other steering sources. However, the timescales for vortices are considerably larger which range from days to a year. It infers the new concept that not only the external sources alone, for example the solar wind, but also the internal source, which is the vortex inertia, can contribute to the short term Earth's magnetic field variation. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: 9 pages, 4 figures

Quasistatic magnetoconvection: Heat transport enhancement and boundary layer crossing

Authors: Zi Li Lim, Kai Leong Chong, Guang-Yu Ding, Ke-Qing Xia

Abstract: We present a numerical study of quasistatic magnetoconvection in a cubic Rayleigh-Bénard (RB) convection cell subjected to a vertical external magnetic field. For moderate values of the Hartmann number Ha, we find an enhancement of heat transport. Furthermore, a maximum heat transport enhancement is observed at certain optimal $Ha_{opt}$. The enhanced heat transport may be understood as a result o… ▽ More We present a numerical study of quasistatic magnetoconvection in a cubic Rayleigh-Bénard (RB) convection cell subjected to a vertical external magnetic field. For moderate values of the Hartmann number Ha, we find an enhancement of heat transport. Furthermore, a maximum heat transport enhancement is observed at certain optimal $Ha_{opt}$. The enhanced heat transport may be understood as a result of the increased coherency of the thermal plumes, which are elementary heat carriers of the system. To our knowledge this is the first time that a heat transfer enhancement by the stabilising Lorentz force in quasistatic magnetoconvection has been observed. We further found that the optimal enhancement may be understood in terms of the crossing between the thermal and the momentum boundary layers (BL) and the fact that temperature fluctuations are maximum near the position where the BLs cross. These findings demonstrate that the heat transport enhancement phenomenon in the quasistatic magnetoconvection system belongs to the same universality class of stabilising$-$destabilising ($S$-$D$) turbulent flows as the systems of confined Rayleigh-Bénard (CRB), rotating Rayleigh-Bénard (RRB) and double-diffusive convection (DDC). This is further supported by the findings that the heat transport, boundary layer ratio and the temperature fluctuations in magnetoconvection at the boundary layer crossing point are similar to the other three cases. △ Less

Submitted 23 February, 2019; originally announced February 2019.

Comments: 25 pages, 17 figures, submitted to Journal of Fluid Mechanics. Due to the limitation "The abstract field cannot be longer than 1,920 characters", the abstract appearing here is slightly shorter than that in the PDF file

A bouncing oil droplet in a stratified liquid and its sudden death

Authors: Yanshen Li, Christian Diddens, Andrea Prosperetti, Kai Leong Chong, Xuehua Zhang, Detlef Lohse

Abstract: Droplets can self-propel when immersed in another liquid in which a concentration gradient is present. Here we report the experimental and numerical study of a self-propelling oil droplet in a vertically stratified ethanol/water mixture: At first, the droplet sinks slowly due to gravity, but then, before having reached its density matched position, jumps up suddenly. More remarkably, the droplet b… ▽ More Droplets can self-propel when immersed in another liquid in which a concentration gradient is present. Here we report the experimental and numerical study of a self-propelling oil droplet in a vertically stratified ethanol/water mixture: At first, the droplet sinks slowly due to gravity, but then, before having reached its density matched position, jumps up suddenly. More remarkably, the droplet bounces repeatedly with an ever increasing jum** distance, until all of a sudden it stops after about 30 min. We identify the Marangoni stress at the droplet/liquid interface as responsible for the jum**: its strength grows exponentially because it pulls down ethanol-rich liquid, which in turn increases its strength even more. The jum** process can repeat because gravity restores the system. Finally, the sudden death of the jum** droplet is also explained. Our findings have demonstrated a type of prominent droplet bouncing inside a continuous medium with no wall or sharp interface. △ Less

Submitted 4 December, 2018; originally announced December 2018.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 122, 154502 (2019)

Multiple-resolution scheme in finite-volume code for active or passive scalar turbulence

Authors: Kai Leong Chong, Guangyu Ding, Ke-Qing Xia

Abstract: In scalar turbulence it is sometimes the case that the scalar diffusivity is smaller than the viscous diffusivity. The thermally-driven turbulent convection in water is a typical example. In such a case the smallest scale in the problem is the Batchelor scale $l_b$, rather than the Kolmogorov scale $l_k$, as $l_b = l_k/Sc^{1/2}$, where Sc is the Schmidt number (or Prandtl number in the case of tem… ▽ More In scalar turbulence it is sometimes the case that the scalar diffusivity is smaller than the viscous diffusivity. The thermally-driven turbulent convection in water is a typical example. In such a case the smallest scale in the problem is the Batchelor scale $l_b$, rather than the Kolmogorov scale $l_k$, as $l_b = l_k/Sc^{1/2}$, where Sc is the Schmidt number (or Prandtl number in the case of temperature). In the numerical studies of such scalar turbulence, the conventional approach is to use a single grid for both the velocity and scalar fields. Such single-resolution scheme often over-resolves the velocity field because the resolution requirement for scalar is higher than that for the velocity field, since $l_b<l_k$ for $Sc>1$. In this paper we put forward an algorithm that implements the so-called multiple-resolution method with a finite-volume code. In this scheme, the velocity and pressure fields are solved in a coarse grid, while the scalar field is solved in a dense grid. The central idea is to implement the interpolation scheme on the framework of finite-volume to reconstruct the divergence-free velocity from the coarse to the dense grid. We demonstrate our method using a canonical model system of fluid turbulence, the Rayleigh-Bénard convection. We show that, with the tailored mesh design, considerable speed-up for simulating scalar turbulence can be achieved, especially for large Schmidt (Prandtl) numbers. In the same time, sufficient accuracy of the scalar and velocity fields can be achived by this multiple-resolution scheme. Although our algorithm is demonstrated with a case of an active scalar, it can be readily applied to passive scalar turbulent flows. △ Less

Submitted 9 May, 2018; originally announced May 2018.

Comments: 16 pages, 11 figures, submitted to Journal of Computational Physics

Effect of Prandtl number on heat transport enhancement in Rayleigh-Bénard convection under geometrical confinement

Authors: Kai Leong Chong, Sebastian Wagner, Matthias Kaczorowski, Olga Shishkina, Ke-Qing Xia

Abstract: We study, using direct numerical simulations, the effect of geometrical confinement on heat transport and flow structure in Rayleigh-Bénard convection in fluids with different Prandtl numbers. Our simulations span over two decades of Prandtl number $Pr$, $0.1 \leq Pr \leq 40$, with the Rayleigh number $Ra$ fixed at $10^8$. The width-to-height aspect ratio $Γ$ spans between $0.025$ and $0.25$ while… ▽ More We study, using direct numerical simulations, the effect of geometrical confinement on heat transport and flow structure in Rayleigh-Bénard convection in fluids with different Prandtl numbers. Our simulations span over two decades of Prandtl number $Pr$, $0.1 \leq Pr \leq 40$, with the Rayleigh number $Ra$ fixed at $10^8$. The width-to-height aspect ratio $Γ$ spans between $0.025$ and $0.25$ while the length-to-height aspect ratio is fixed at one. We first find that for $Pr \geq 0.5$, geometrical confinement can lead to a significant enhancement in heat transport as characterized by the Nusselt number $Nu$. For those cases, $Nu$ is maximal at a certain $Γ= Γ_{opt}$. It is found that $Γ_{opt}$ exhibits a power-law relation with $Pr$ as $Γ_{opt}=0.11Pr^{-0.06}$, and the maximal relative enhancement generally increases with $Pr$ over the explored parameter range. As opposed to the situation of $Pr \geq 0.5$, confinement-induced enhancement in $Nu$ is not realized for smaller values of $Pr$, such as $0.1$ and $0.2$. The $Pr$ dependence of the heat transport enhancement can be understood in its relation to the coverage area of the thermal plumes over the thermal boundary layer (BL) where larger coverage is observed for larger $Pr$ due to a smaller thermal diffusivity. We further show that $Γ_{opt}$ is closely related to the crossing of thermal and momentum BLs, and find that $Nu$ declines sharply when the thickness ratio of the thermal and momentum BLs exceeds a certain value of about one. In addition, through examining the temporally averaged flow fields and 2D mode decomposition, it is found that for smaller $Pr$ the large-scale circulation is robust against the geometrical confinement of the convection cell. △ Less

Submitted 21 September, 2017; originally announced September 2017.

Comments: 25 pages, 11 figures, and 1 table in main text

Confined Rayleigh-Bénard, Rotating Rayleigh-Bénard, and Double Diffusive Convection: A unifying view on turbulent transport enhancement through coherent structure manipulation

Authors: Kai Leong Chong, Yantao Yang, Shi-Di Huang, **-Qiang Zhong, Richard J. A. M. Stevens, Roberto Verzicco, Detlef Lohse, Ke-Qing Xia

Abstract: Many natural and engineering systems are simultaneously subjected to a driving force and a stabilizing force. The interplay between the two forces, especially for highly nonlinear systems such as fluid flow, often results in surprising features. Here we reveal such features in three different types of Rayleigh-Bénard (RB) convection, i.e. buoyancy-driven flow with the fluid density being affected… ▽ More Many natural and engineering systems are simultaneously subjected to a driving force and a stabilizing force. The interplay between the two forces, especially for highly nonlinear systems such as fluid flow, often results in surprising features. Here we reveal such features in three different types of Rayleigh-Bénard (RB) convection, i.e. buoyancy-driven flow with the fluid density being affected by a scalar field. In the three cases different {\it stabilizing forces} are considered, namely (i) horizontal confinement, (ii) rotation around a vertical axis, and (iii) a second stabilizing scalar field. Despite the very different nature of the stabilizing forces and the corresponding equations of motion, at moderate strength we counterintuitively but consistently observe an {\it enhancement} in the flux, even though the flow motion is weaker than the original RB flow. The flux enhancement occurs in an intermediate regime in which the stabilizing force is strong enough to alter the flow structures in the bulk to a more organised morphology, yet not too strong to severely suppress the flow motions. Near the optimal transport enhancements all three systems exhibit a transition from a state in which the thermal boundary layer (BL) is nested inside the momentum BL to the one with the thermal BL being thicker than the momentum BL. △ Less

Submitted 15 February, 2017; originally announced February 2017.

Comments: 10 pages, 5 figures, and 3 tables in main text and supplementary materials

Journal ref: Phys. Rev. Lett. 119, 064501 (2017)