-
CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs
Authors:
Adrian K. Sinclair,
James Burgoyne,
Anthony I. Huber,
Colin Murphy,
Steve K. Choi,
Cody J. Duell,
Zachary B. Huber,
Yaqiong Li,
Scott C. Chapman,
Michael D. Niemack,
Thomas Nikola,
Eve M. Vavagiakis,
Samantha Walker,
Jordan D. Wheeler,
Jason Austermann,
Lawrence Lin,
Ruixuan Xie,
Bugao Zou,
Philip D. Mauskopf
Abstract:
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of…
▽ More
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Projected background and sensitivity of AMoRE-II
Authors:
A. Agrawal,
V. V. Alenkov,
P. Aryal,
J. Beyer,
B. Bhandari,
R. S. Boiko,
K. Boonin,
O. Buzanov,
C. R. Byeon,
N. Chanthima,
M. K. Cheoun,
J. S. Choe,
Seonho Choi,
S. Choudhury,
J. S. Chung,
F. A. Danevich,
M. Djamal,
D. Drung,
C. Enss,
A. Fleischmann,
A. M. Gangapshev,
L. Gastaldo,
Y. M. Gavrilyuk,
A. M. Gezhaev,
O. Gileva
, et al. (81 additional authors not shown)
Abstract:
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap…
▽ More
AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Stochastic logic in biased coupled photonic probabilistic bits
Authors:
Michael Horodynski,
Charles Roques-Carmes,
Yannick Salamin,
Seou Choi,
Jamison Sloan,
Di Luo,
Marin Soljačić
Abstract:
Optical computing often employs tailor-made hardware to implement specific algorithms, trading generality for improved performance in key aspects like speed and power efficiency. An important computing approach that is still missing its corresponding optical hardware is probabilistic computing, used e.g. for solving difficult combinatorial optimization problems. In this study, we propose an experi…
▽ More
Optical computing often employs tailor-made hardware to implement specific algorithms, trading generality for improved performance in key aspects like speed and power efficiency. An important computing approach that is still missing its corresponding optical hardware is probabilistic computing, used e.g. for solving difficult combinatorial optimization problems. In this study, we propose an experimentally viable photonic approach to solve arbitrary probabilistic computing problems. Our method relies on the insight that coherent Ising machines composed of coupled and biased optical parametric oscillators can emulate stochastic logic. We demonstrate the feasibility of our approach by using numerical simulations equivalent to the full density matrix formulation of coupled optical parametric oscillators.
△ Less
Submitted 6 June, 2024;
originally announced June 2024.
-
Acceptance Tests of more than 10 000 Photomultiplier Tubes for the multi-PMT Digital Optical Modules of the IceCube Upgrade
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise,
C. Bellenghi
, et al. (399 additional authors not shown)
Abstract:
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities…
▽ More
More than 10,000 photomultiplier tubes (PMTs) with a diameter of 80 mm will be installed in multi-PMT Digital Optical Modules (mDOMs) of the IceCube Upgrade. These have been tested and pre-calibrated at two sites. A throughput of more than 1000 PMTs per week with both sites was achieved with a modular design of the testing facilities and highly automated testing procedures. The testing facilities can easily be adapted to other PMTs, such that they can, e.g., be re-used for testing the PMTs for IceCube-Gen2. Single photoelectron response, high voltage dependence, time resolution, prepulse, late pulse, afterpulse probabilities, and dark rates were measured for each PMT. We describe the design of the testing facilities, the testing procedures, and the results of the acceptance tests.
△ Less
Submitted 20 June, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Quantum plasmonic sensing by Hong-Ou-Mandel interferometry
Authors:
Seung** Yoon,
Yu Sung Choi,
Mark Tame,
Jae Woong Yoon,
Sergey V. Polyakov,
Changhyoup Lee
Abstract:
We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher…
▽ More
We propose a quantum plasmonic sensor using Hong-Ou-Mandel (HOM) interferometry that measures the refractive index of an analyte, embedded in a plasmonic beam splitter composed of a dual-Kretschmann configuration, which serves as a frustrated total internal reflection beamsplitter. The sensing performance of the HOM interferometry, combined with single-photon detectors, is evaluated through Fisher information for estimation of the refractive index of the analyte. This is subsequently compared with the classical benchmark that considers the injection of a coherent state of light into the plasmonic beamsplitter. By varying the wavelength of the single photons and the refractive index of the analyte, we identify a wide range where a 50 % quantum enhancement is achieved and discuss the observed behaviors in comparison with the classical benchmark. We expect this study to provide a useful insight into the advancement of quantum-enhanced sensing technologies, with direct implications for a wide range of nanophotonic beamsplitter structures.
△ Less
Submitted 23 April, 2024; v1 submitted 16 April, 2024;
originally announced April 2024.
-
Atomic magnetometry using a metasurface polarizing beamsplitter in silicon on sapphire
Authors:
Xuting Yang,
Pritha Mukherjee,
Minjeong Kim,
Hongyan Mei,
Chengyu Fang,
Soyeon Choi,
Yuhan Tong,
Sarah Perlowski,
David A. Czaplewski,
Alan M. Dibos,
Mikhail A. Kats,
Jennifer T. Choy
Abstract:
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasu…
▽ More
We demonstrate atomic magnetometry using a metasurface polarizing beamsplitter fabricated on a silicon-on-sapphire (SOS) platform. The metasurface splits a beam that is near-resonant with the rubidium atoms (795 nm) into orthogonal linear polarizations, enabling measurement of magnetically sensitive circular birefringence in a rubidium vapor through balanced polarimetry. We incorporated the metasurface into an atomic magnetometer based on nonlinear magneto-optical rotation and measured sub-nanotesla sensitivity, which is limited by low-frequency technical noise and transmission loss through the metasurface. To our knowledge, this work represents the first demonstration of SOS nanophotonics for atom-based sensing and paves the way for highly integrated, miniaturized atomic sensors with enhanced sensitivity and portability.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Universal fluctuations and noise learning from Hilbert-space ergodicity
Authors:
Adam L. Shaw,
Daniel K. Mark,
Joonhee Choi,
Ran Finkelstein,
Pascal Scholl,
Soonwon Choi,
Manuel Endres
Abstract:
Systems reaching thermal equilibrium are ubiquitous. For classical systems, this phenomenon is typically understood statistically through ergodicity in phase space, but translating this to quantum systems is a long-standing problem of interest. Recently a quantum notion of ergodicity has been proposed, namely that isolated, global quantum states uniformly explore their available state space, dubbe…
▽ More
Systems reaching thermal equilibrium are ubiquitous. For classical systems, this phenomenon is typically understood statistically through ergodicity in phase space, but translating this to quantum systems is a long-standing problem of interest. Recently a quantum notion of ergodicity has been proposed, namely that isolated, global quantum states uniformly explore their available state space, dubbed Hilbert-space ergodicity. Here we observe signatures of this process with an experimental Rydberg quantum simulator and various numerical models, before generalizing to the case of a local quantum system interacting with its environment. For a closed system, where the environment is a complementary subsystem, we predict and observe a smooth quantum-to-classical transition in that observables progress from large, quantum fluctuations to small, Gaussian fluctuations as the bath size grows. This transition is universal on a quantitative level amongst a wide range of systems, including those at finite temperature, those with itinerant particles, and random circuits. Then, we consider the case of an open system interacting noisily with an external environment. We predict the statistics of observables under largely arbitrary noise channels including those with correlated errors, allowing us to discriminate candidate error models both for continuous Hamiltonian time evolution and for digital random circuits. Ultimately our results clarify the role of ergodicity in quantum dynamics, with fundamental and practical consequences.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Photonic probabilistic machine learning using quantum vacuum noise
Authors:
Seou Choi,
Yannick Salamin,
Charles Roques-Carmes,
Rumen Dangovski,
Di Luo,
Zhuo Chen,
Michael Horodynski,
Jamison Sloan,
Shiekh Zia Uddin,
Marin Soljacic
Abstract:
Probabilistic machine learning utilizes controllable sources of randomness to encode uncertainty and enable statistical modeling. Harnessing the pure randomness of quantum vacuum noise, which stems from fluctuating electromagnetic fields, has shown promise for high speed and energy-efficient stochastic photonic elements. Nevertheless, photonic computing hardware which can control these stochastic…
▽ More
Probabilistic machine learning utilizes controllable sources of randomness to encode uncertainty and enable statistical modeling. Harnessing the pure randomness of quantum vacuum noise, which stems from fluctuating electromagnetic fields, has shown promise for high speed and energy-efficient stochastic photonic elements. Nevertheless, photonic computing hardware which can control these stochastic elements to program probabilistic machine learning algorithms has been limited. Here, we implement a photonic probabilistic computer consisting of a controllable stochastic photonic element - a photonic probabilistic neuron (PPN). Our PPN is implemented in a bistable optical parametric oscillator (OPO) with vacuum-level injected bias fields. We then program a measurement-and-feedback loop for time-multiplexed PPNs with electronic processors (FPGA or GPU) to solve certain probabilistic machine learning tasks. We showcase probabilistic inference and image generation of MNIST-handwritten digits, which are representative examples of discriminative and generative models. In both implementations, quantum vacuum noise is used as a random seed to encode classification uncertainty or probabilistic generation of samples. In addition, we propose a path towards an all-optical probabilistic computing platform, with an estimated sampling rate of ~ 1 Gbps and energy consumption of ~ 5 fJ/MAC. Our work paves the way for scalable, ultrafast, and energy-efficient probabilistic machine learning hardware.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Improved modeling of in-ice particle showers for IceCube event reconstruction
Authors:
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
L. Ausborm,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
S. Bash,
V. Basu,
R. Bay,
J. J. Beatty,
J. Becker Tjus,
J. Beise
, et al. (394 additional authors not shown)
Abstract:
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstr…
▽ More
The IceCube Neutrino Observatory relies on an array of photomultiplier tubes to detect Cherenkov light produced by charged particles in the South Pole ice. IceCube data analyses depend on an in-depth characterization of the glacial ice, and on novel approaches in event reconstruction that utilize fast approximations of photoelectron yields. Here, a more accurate model is derived for event reconstruction that better captures our current knowledge of ice optical properties. When evaluated on a Monte Carlo simulation set, the median angular resolution for in-ice particle showers improves by over a factor of three compared to a reconstruction based on a simplified model of the ice. The most substantial improvement is obtained when including effects of birefringence due to the polycrystalline structure of the ice. When evaluated on data classified as particle showers in the high-energy starting events sample, a significantly improved description of the events is observed.
△ Less
Submitted 22 April, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Nonproportionality of NaI(Tl) Scintillation Detector for Dark Matter Search Experiments
Authors:
S. M. Lee,
G. Adhikari,
N. Carlin,
J. Y. Cho,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Fran. a,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
S. W. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim
, et al. (37 additional authors not shown)
Abstract:
We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced…
▽ More
We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlap** energies, which was overcome by long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of $^{22}$Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments.
△ Less
Submitted 10 May, 2024; v1 submitted 14 January, 2024;
originally announced January 2024.
-
Scalable nanoimprint manufacturing of multi-layer hybrid metasurface device
Authors:
Shinhyuk Choi,
Jiawei Zuo,
Nabasindhu Das Yu Yao,
Chao Wang
Abstract:
Optical metasurfaces, consisting of subwavelength-scale meta-atom arrays, hold great promise to overcome fundamental limitations of conventional optics. Scalable nanomanufacturing of metasurfaces with high uniformity and reproducibility is key to transferring technology from laboratory demonstrations to commercialization. Recently, nanoimprint lithography (NIL) has attracted increasing interests f…
▽ More
Optical metasurfaces, consisting of subwavelength-scale meta-atom arrays, hold great promise to overcome fundamental limitations of conventional optics. Scalable nanomanufacturing of metasurfaces with high uniformity and reproducibility is key to transferring technology from laboratory demonstrations to commercialization. Recently, nanoimprint lithography (NIL) has attracted increasing interests for metasurface fabrication because of its superior nanometer resolution, rapid prototy** and large-area manufacturing capability. Despite NIL demonstrations of single-layer metasurface, scalable fabrication of double- and multi-layer metasurfaces remains challenging. Here we leverage the nanometer-scale resolution and 3D pattern transfer capability of NIL to fabricate multi-layered metasurfaces for on-chip polarimetric imaging devices. Our process achieved sub-100 nm nanostructures, high alignment accuracy (translational error <200 nm; rotational error <0.02°), and good uniformity (<4 nm linewidth deviation) over >20 mm2. This NIL-based, low-cost and high-throughput nanomanufacturing approach paves the way toward scalable production of a plethora of metasurface structures for ultra-compact optic and optoelectronic devices and systems.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
CATLIFE (Complementary Arm for Target LIke FragmEnts): Spectrometer for Target like fragments at VAMOS++
Authors:
Y. Son,
Y. H. Kim,
Y. Cho,
S. Choi,
S. Bae,
K. I. Hahn,
J. Park,
A. Navin,
A. Lemasson,
M. Rejmund,
D. Ramos,
E. Clément,
D. Ackermann,
A. Utepov,
C. Fougeres,
J. C. Thomas,
J. Goupil,
G. Fremont,
G. de France
Abstract:
The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGA…
▽ More
The multi-nucleon transfer reaction between 136Xe beam and 198Pt target at the beam energy 7 MeV/u was studied using the large acceptance spectrometer VAMOS++ coupled with the newly installed second arm time-of-flight and delayed $γ$-ray spectrometer CATLIFE (Complementary Arm for Target LIke FragmEnts). The CATLIFE detector is composed of a large area multi-wire proportional chamber and the EXOGAM HPGe clover detectors with an ion flight length of 1230 mm. Direct measurement of the target-like fragments (TLF) and the delayed $γ$-rays from the isomeric state helps to improve TLF identification. The use of the velocity of TLFs and the delayed $γ$-ray demonstrate the proof of principle and effectiveness of the new setup.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Particle Identification at VAMOS++ with Machine Learning Techniques
Authors:
Y. Cho,
Y. H. Kim,
S. Choi,
J. Park,
S. Bae,
K. I. Hahn,
Y. Son,
A. Navin,
A. Lemasson,
M. Rejmund,
D. Ramos,
D. Ackermann,
A. Utepov,
C. Fourgeres,
J. C. Thomas,
J. Goupil,
G. Fremont,
G. de France,
Y. X. Watanabe,
Y. Hirayama,
S. Jeong,
T. Niwase,
H. Miyatake,
P. Schury,
M. Rosenbusch
, et al. (23 additional authors not shown)
Abstract:
Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method re…
▽ More
Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method reduced the complexity of the kinetic energy calibration and outperformed the conventional method, improving the charge state resolution by 8%
△ Less
Submitted 14 November, 2023; v1 submitted 13 November, 2023;
originally announced November 2023.
-
Alpha backgrounds in NaI(Tl) crystals of COSINE-100
Authors:
G. Adhikari,
N. Carlin,
D. F. F. S. Cavalcante,
J. Y. Cho,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
S. W. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim
, et al. (38 additional authors not shown)
Abstract:
COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Ca…
▽ More
COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Carlo simulation results and activity quantification of the alpha decay components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that the alpha decays probabilistically undergo two possible quenching factors but require further investigation. The fitted results are consistent with independent measurements and improve the overall understanding of the COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent measurements.
△ Less
Submitted 30 January, 2024; v1 submitted 8 November, 2023;
originally announced November 2023.
-
Probing Quantum Efficiency: Exploring System Hardness in Electronic Ground State Energy Estimation
Authors:
Seonghoon Choi,
Ignacio Loaiza,
Robert A. Lang,
Luis A. Martínez-Martínez,
Artur F. Izmaylov
Abstract:
We consider the question of how correlated the system hardness is between classical algorithms of electronic structure theory in ground state estimation and quantum algorithms. To define the system hardness for classical algorithms we employ empirical criterion based on the deviation of electronic energies produced by coupled cluster and configuration interaction methods from the exact ones along…
▽ More
We consider the question of how correlated the system hardness is between classical algorithms of electronic structure theory in ground state estimation and quantum algorithms. To define the system hardness for classical algorithms we employ empirical criterion based on the deviation of electronic energies produced by coupled cluster and configuration interaction methods from the exact ones along multiple bonds dissociation in a set of molecular systems. For quantum algorithms, we have selected the Variational Quantum Eigensolver (VQE) and Quantum Phase Estimation (QPE) methods. As characteristics of the system hardness for quantum methods, we analyzed circuit depths for the state preparation, the number of quantum measurements needed for the energy expectation value, and various cost characteristics for the Hamiltonian encodings via Trotter approximation and linear combination of unitaries (LCU). Our results show that the quantum resource requirements are mostly unaffected by classical hardness, with the only exception being the state preparation part, which contributes to both VQE and QPE algorithm costs. However, there are clear indications that constructing the initial state with a significant overlap with the true ground state (>10%) is easier than obtaining the state with an energy expectation value within chemical precision. These results support optimism regarding the identification of a molecular system where a quantum algorithm excels over its classical counterpart, as quantum methods can maintain efficiency in classically challenging systems.
△ Less
Submitted 31 October, 2023;
originally announced November 2023.
-
Metasurface-based Mueller Matrix Microscope
Authors:
Jiawei Zuo,
Ashutosh Bangalore Aravinda Babu,
Mo Tian,
**g Bai,
Shinhyuk Choi,
Hossain Mansur Resalat Faruque,
Sarah Holloway,
Michael N. Kozicki,
Chao Wang,
Yu Yao
Abstract:
In conventional optical microscopes, image contrast of objects mainly results from the differences in light intensity and/or color. Muller matrix optical microscopes (MMMs), on the other hand, can provide significantly enhanced image contrast and rich information about objects by analyzing their interactions with polarized light. However, state-of-art MMMs are fundamentally limited by bulky and sl…
▽ More
In conventional optical microscopes, image contrast of objects mainly results from the differences in light intensity and/or color. Muller matrix optical microscopes (MMMs), on the other hand, can provide significantly enhanced image contrast and rich information about objects by analyzing their interactions with polarized light. However, state-of-art MMMs are fundamentally limited by bulky and slow polarization state generators and analyzers. Here, we demonstrated the feasibility of applying metasurfaces to enable a fast and compact MMM, i.e., Meta-MMM. We developed a dual-color MMM, in both reflection and transmission modes, based on a chip-integrated high-speed (>20fps) metasurface polarization state analyzer (Meta-PSA) and realized high measurement accuracy for Muller matrix (MM) imaging. We then applied our Meta-MMM to nanostructure characterization, surface morphology analysis and discovered birefringent structures in honeybee wings. Our meta-MMMs hold the promise to revolutionize various applications from biological imaging, medical diagnosis, material characterization to industry inspection and space exploration.
△ Less
Submitted 12 December, 2023; v1 submitted 30 October, 2023;
originally announced October 2023.
-
Telescope imaging beyond the Rayleigh limit in extremely low SNR
Authors:
Hyunsoo Choi,
Seungman Choi,
Peter Menart,
Angshuman Deka,
Zubin Jacob
Abstract:
The Rayleigh limit and low Signal-to-Noise Ratio (SNR) scenarios pose significant limitations to optical imaging systems used in remote sensing, infrared thermal imaging, and space domain awareness. In this study, we introduce a Stochastic Sub-Rayleigh Imaging (SSRI) algorithm to localize point objects and estimate their positions, brightnesses, and number in low SNR conditions, even below the Ray…
▽ More
The Rayleigh limit and low Signal-to-Noise Ratio (SNR) scenarios pose significant limitations to optical imaging systems used in remote sensing, infrared thermal imaging, and space domain awareness. In this study, we introduce a Stochastic Sub-Rayleigh Imaging (SSRI) algorithm to localize point objects and estimate their positions, brightnesses, and number in low SNR conditions, even below the Rayleigh limit. Our algorithm adopts a maximum likelihood approach and exploits the Poisson distribution of incoming photons to overcome the Rayleigh limit in low SNR conditions. In our experimental validation, which closely mirrors practical scenarios, we focus on conditions with closely spaced sources within the sub-Rayleigh limit (0.49-1.00R) and weak signals (SNR less than 1.2). We use the Jaccard index and Jaccard efficiency as a figure of merit to quantify imaging performance in the sub-Rayleigh region. Our approach consistently outperforms established algorithms such as Richardson-Lucy and CLEAN by 4X in the low SNR, sub-Rayleigh regime. Our SSRI algorithm allows existing telescope-based optical/infrared imaging systems to overcome the extreme limit of sub-Rayleigh, low SNR source distributions, potentially impacting a wide range of fields, including passive thermal imaging, remote sensing, and space domain awareness.
△ Less
Submitted 17 January, 2024; v1 submitted 16 October, 2023;
originally announced October 2023.
-
Yield Stress Fluids Solidifying in Capillary Imbibition
Authors:
Hanul Kim,
Siyoung Q. Choi
Abstract:
When subjected to an external stress that exceeds the yield stress ($σ_\mathrm{Y}$), yield stress fluids (YSFs) undergo a solid-to-liquid transition. Despite the extensive studies, there has been limited attention to the process of liquid-to-solid transition. This work examines the solidification of YSFs through capillary imbibition, easily observed in the processes of wetting, coating, spreading,…
▽ More
When subjected to an external stress that exceeds the yield stress ($σ_\mathrm{Y}$), yield stress fluids (YSFs) undergo a solid-to-liquid transition. Despite the extensive studies, there has been limited attention to the process of liquid-to-solid transition. This work examines the solidification of YSFs through capillary imbibition, easily observed in the processes of wetting, coating, spreading, and wicking. During gradual deceleration of the capillary rise, YSFs display an unexpected flowing behavior, even when subjected to stresses below the $σ_\mathrm{Y}$. We propose a model with numerical solutions based on rheological properties of YSFs and slip to capture this unusual, yet universal behavior.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
Temperature Dependence of a Depth-Encoded System for Polarization-Sensitive Optical Coherence Tomography using a PM Fiber
Authors:
Philipp Tatar-Mathes,
Rasmus Eilkær Hansen,
Samuel Choi,
Manuel J. Marques,
Niels Møller Israelsen,
Adrian Podoleanu
Abstract:
A polarization-sensitive optical coherence tomography (PS-OCT) system is able to not only show the structure of samples through the analysis of backscattered light, but is also capable of determining their polarimetric properties. This is an extra functionality to OCT which allows the retardance and axis orientation of a bulk sample to be determined. Here, we describe the temperature instabilities…
▽ More
A polarization-sensitive optical coherence tomography (PS-OCT) system is able to not only show the structure of samples through the analysis of backscattered light, but is also capable of determining their polarimetric properties. This is an extra functionality to OCT which allows the retardance and axis orientation of a bulk sample to be determined. Here, we describe the temperature instabilities of a depth-encoded, multiple input state PS-OCT system, where two waves corresponding to two orthogonal states in the interrogating beam are delayed using a 5-meter long polarization-maintaning (PM) fiber. It is shown that the temperature not only affects the delay between the two relatively delayed waves, but also the amount of mismatched dispersion in the interferometer, which ultimately affects the achievable axial resolution in the system. To this end, the technique of complex master/slave interferometry (CMSI) can be used as an option to mitigate this effect.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
Benchmarking highly entangled states on a 60-atom analog quantum simulator
Authors:
Adam L. Shaw,
Zhuo Chen,
Joonhee Choi,
Daniel K. Mark,
Pascal Scholl,
Ran Finkelstein,
Andreas Elben,
Soonwon Choi,
Manuel Endres
Abstract:
Quantum systems have entered a competitive regime where classical computers must make approximations to represent highly entangled quantum states. However, in this beyond-classically-exact regime, fidelity comparisons between quantum and classical systems have so far been limited to digital quantum devices, and it remains unsolved how to estimate the actual entanglement content of experiments. Her…
▽ More
Quantum systems have entered a competitive regime where classical computers must make approximations to represent highly entangled quantum states. However, in this beyond-classically-exact regime, fidelity comparisons between quantum and classical systems have so far been limited to digital quantum devices, and it remains unsolved how to estimate the actual entanglement content of experiments. Here we perform fidelity benchmarking and mixed-state entanglement estimation with a 60-atom analog Rydberg quantum simulator, reaching a high entanglement entropy regime where exact classical simulation becomes impractical. Our benchmarking protocol involves extrapolation from comparisons against an approximate classical algorithm, introduced here, with varying entanglement limits. We then develop and demonstrate an estimator of the experimental mixed-state entanglement, finding our experiment is competitive with state-of-the-art digital quantum devices performing random circuit evolution. Finally, we compare the experimental fidelity against that achieved by various approximate classical algorithms, and find that only the algorithm we introduce is able to keep pace with the experiment on the classical hardware we employ. Our results enable a new paradigm for evaluating the ability of both analog and digital quantum devices to generate entanglement in the beyond-classically-exact regime, and highlight the evolving divide between quantum and classical systems.
△ Less
Submitted 4 December, 2023; v1 submitted 15 August, 2023;
originally announced August 2023.
-
Recyclable Organic Bilayer Piezoresistive Cantilever for Torque Magnetometry at Cryogenic Temperatures
Authors:
Eden Steven,
Danica Krstovska,
Daniel Suarez,
Tasya Berliana,
Eric Jobiliong,
Eun Sang Choi
Abstract:
Flexible sensors made from organic bilayer films of molecular conductor on polymeric matrix have attracted many interest due to their simple fabrication with high potential for being scaled up, and for their high-performing multi-functionality at room temperatures. In particular, the piezoresistive property of the organic bilayer film is among one of the highest ever reported, allowing its utiliza…
▽ More
Flexible sensors made from organic bilayer films of molecular conductor on polymeric matrix have attracted many interest due to their simple fabrication with high potential for being scaled up, and for their high-performing multi-functionality at room temperatures. In particular, the piezoresistive property of the organic bilayer film is among one of the highest ever reported, allowing its utilization in various sensing applications. In this work, we present the study of the flexural piezoresistivity of an organic bilayer film based on $β-\rm (BEDT-TTF)_2I_3$ on polycarbonate matrix from room temperatures down to cryogenics temperatures. Non-trivial temperature dependent profile of the gauge factor is revealed, including enhancement of the gauge factor from $\sim 18$ at room temperatures to $\sim 48$ at 4.3 K. An organic bilayer cantilever magnetometer is developed and demonstrated to measure magnetic properties of a single crystalline organic superconductor $κ-\rm (BEDT-TTF)_2Cu(N(CN)_2)Br$ at temperatures down to $\sim 2.75$ K and magnetic fields up to 5 T. The high-performing bilayer devices can be fabricated in a very simple manner, and they are robust and recyclable.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Search for inelastic WIMP-iodine scattering with COSINE-100
Authors:
G. Adhikari,
N. Carlin,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
J. H. Jo,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim,
Y. J. Ko,
D. H. Lee
, et al. (34 additional authors not shown)
Abstract:
We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal co…
▽ More
We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal compared to the typical WIMP nuclear recoil signal. We found no evidence for this inelastic scattering signature and set a 90 $\%$ confidence level upper limit on the WIMP-proton spin-dependent, inelastic scattering cross section of $1.2 \times 10^{-37} {\rm cm^{2}}$ at the WIMP mass 500 ${\rm GeV/c^{2}}$.
△ Less
Submitted 30 October, 2023; v1 submitted 19 July, 2023;
originally announced July 2023.
-
Quantum Computation and Simulation using Fermion-Pair Registers
Authors:
Xiangkai Sun,
Di Luo,
Soonwon Choi
Abstract:
We propose and analyze an approach to realize quantum computation and simulation using fermionic particles under quantum gas microscopes. Our work is inspired by a recent experimental demonstration of large-scale quantum registers, where tightly localized fermion pairs are used to encode qubits exhibiting long coherence time and robustness against laser intensity noise. We describe how to engineer…
▽ More
We propose and analyze an approach to realize quantum computation and simulation using fermionic particles under quantum gas microscopes. Our work is inspired by a recent experimental demonstration of large-scale quantum registers, where tightly localized fermion pairs are used to encode qubits exhibiting long coherence time and robustness against laser intensity noise. We describe how to engineer the SWAP gate and high-fidelity controlled-phase gates by adjusting the fermion hop** as well as Feshbach interaction strengths. Combined with previously demonstrated single-qubit rotations, these gates establish the computational universality of the system. Furthermore, we show that 2D quantum Ising Hamiltonians with tunable transverse and longitudinal fields can be efficient simulated by modulating Feshbach interaction strengths. We present a sample-efficient protocol to characterize engineered gates and Hamiltonian dynamics based on an improved classical shadow process tomography that requires minimal experimental controls. Our work opens up new opportunities to harness existing ultracold quantum gases for quantum information sciences.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Measurement of Atmospheric Neutrino Mixing with Improved IceCube DeepCore Calibration and Data Processing
Authors:
IceCube Collaboration,
R. Abbasi,
M. Ackermann,
J. Adams,
S. K. Agarwalla,
J. A. Aguilar,
M. Ahlers,
J. M. Alameddine,
N. M. Amin,
K. Andeen,
G. Anton,
C. Argüelles,
Y. Ashida,
S. Athanasiadou,
S. N. Axani,
X. Bai,
A. Balagopal V.,
M. Baricevic,
S. W. Barwick,
V. Basu,
R. Bay,
J. J. Beatty,
K. -H. Becker,
J. Becker Tjus,
J. Beise
, et al. (383 additional authors not shown)
Abstract:
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detai…
▽ More
We describe a new data sample of IceCube DeepCore and report on the latest measurement of atmospheric neutrino oscillations obtained with data recorded between 2011-2019. The sample includes significant improvements in data calibration, detector simulation, and data processing, and the analysis benefits from a detailed treatment of systematic uncertainties, with significantly higher level of detail since our last study. By measuring the relative fluxes of neutrino flavors as a function of their reconstructed energies and arrival directions we constrain the atmospheric neutrino mixing parameters to be $\sin^2θ_{23} = 0.51\pm 0.05$ and $Δm^2_{32} = 2.41\pm0.07\times 10^{-3}\mathrm{eV}^2$, assuming a normal mass ordering. The resulting 40\% reduction in the error of both parameters with respect to our previous result makes this the most precise measurement of oscillation parameters using atmospheric neutrinos. Our results are also compatible and complementary to those obtained using neutrino beams from accelerators, which are obtained at lower neutrino energies and are subject to different sources of uncertainties.
△ Less
Submitted 8 August, 2023; v1 submitted 24 April, 2023;
originally announced April 2023.
-
Search for bosonic super-weakly interacting massive particles at COSINE-100
Authors:
G. Adhikari,
N. Carlin,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. Franca,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
J. H. Jo,
H. W. Joo,
W. G. Kang,
M. Kauer,
B. H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
W. K. Kim,
Y. D. Kim,
Y. H. Kim,
Y. J. Ko,
D. H. Lee
, et al. (34 additional authors not shown)
Abstract:
We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10…
▽ More
We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10 $\mathrm{keV/c}^2$ to 1 $\mathrm{MeV/c}^2$, and we present the exclusion limits on the dimensionless coupling constants to electrons $g_{ae}$ for pseudoscalar and $κ$ for vector BSWs at 90% confidence level. Our results show that these limits are improved by including the Compton-like process in masses of BSW, above $\mathcal{O}(100\,\mathrm{keV/c}^2)$.
△ Less
Submitted 27 August, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Chip-Integrated Metasurface Full-Stokes Polarimetric Imaging Sensor
Authors:
Jiawei Zuo,
**g Bai,
Shinhyuk Choi,
Ali Basiri,
Xiahui Chen,
Chao Wang,
Yu Yao
Abstract:
Polarimetric imaging has a wide range of applications for uncovering features invisible to human eyes and conventional imaging sensors. Compact, fast, cost-effective and accurate full-Stokes polarimetric imaging sensors are highly desirable in many applications, which, however, remain elusive due to fundamental material limitations. Here we present a Metasurface-based Full-Stokes Polarimetric Imag…
▽ More
Polarimetric imaging has a wide range of applications for uncovering features invisible to human eyes and conventional imaging sensors. Compact, fast, cost-effective and accurate full-Stokes polarimetric imaging sensors are highly desirable in many applications, which, however, remain elusive due to fundamental material limitations. Here we present a Metasurface-based Full-Stokes Polarimetric Imaging sensor (MetaPolarIm) realized by integrating an ultrathin (~600 nm) metasurface polarization filter array (MPFA) onto a visible imaging sensor with CMOS compatible fabrication processes. The MPFA is featured with broadband dielectric-metal hybrid chiral metasurfaces and double-layer nanograting polarizers. This chip-integrated polarimetric imaging sensor enables single-shot full-Stokes imaging (speed limited by the CMOS imager) with the most compact form factor, record high measurement accuracy, dual-color operation (green and red) and a full angle of view up to 40 degrees. MetaPolarIm holds great promise to enable transformative applications in autonomous vision, industry inspection, space exploration, medical imaging and diagnosis.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
Biasing the quantum vacuum to control macroscopic probability distributions
Authors:
Charles Roques-Carmes,
Yannick Salamin,
Jamison Sloan,
Seou Choi,
Gustavo Velez,
Ethan Koskas,
Nicholas Rivera,
Steven E. Kooi,
John D. Joannopoulos,
Marin Soljacic
Abstract:
One of the most important insights of quantum field theory is that electromagnetic fields must fluctuate. Even in the vacuum state, the electric and magnetic fields have a nonzero variance, leading to ubiquitous effects such as spontaneous emission, the Lamb shift, the Casimir effect, and more. These "vacuum fluctuations" have also been harnessed as a source of perfect randomness, for example to g…
▽ More
One of the most important insights of quantum field theory is that electromagnetic fields must fluctuate. Even in the vacuum state, the electric and magnetic fields have a nonzero variance, leading to ubiquitous effects such as spontaneous emission, the Lamb shift, the Casimir effect, and more. These "vacuum fluctuations" have also been harnessed as a source of perfect randomness, for example to generate perfectly random photonic bits. Despite these achievements, many potential applications of quantum randomness in fields such as probabilistic computing rely on controllable probability distributions, which have not yet been realized on photonic platforms. In this work, we show that the injection of vacuum-level "bias" fields into a multi-stable optical system enables a controllable source of "biased" quantum randomness. We demonstrate this concept in an optical parametric oscillator (OPO). Ordinarily, an OPO initiated from the ground state develops a signal field in one of two degenerate phase states (0 and $π$) with equal probability. By injecting bias pulses which contain less than one photon on average, we control the probabilities associated with the two output states, leading to the first controllable photonic probabilistic bit (p-bit). We shed light on the physics behind this process, showing quantitative agreement between theory and experiment. Finally, we demonstrate the potential of our approach for sensing sub-photon level fields by showing that our system is sensitive to the temporal shape of bias field pulses far below the single photon level. Our results suggest a new platform for the study of stochastic quantum dynamics in nonlinear driven-dissipative systems, and point toward possible applications in ultrafast photonic probabilistic computing, as well as the sensing of extremely weak fields.
△ Less
Submitted 24 April, 2023; v1 submitted 6 March, 2023;
originally announced March 2023.
-
Measurement optimization techniques for excited electronic states in near-term quantum computing algorithms
Authors:
Seonghoon Choi,
Artur F. Izmaylov
Abstract:
The variational quantum eigensolver (VQE) remains one of the most popular near-term quantum algorithms for solving the electronic structure problem. Yet, for its practicality, the main challenge to overcome is improving the quantum measurement efficiency. Numerous quantum measurement techniques have been developed recently, but it is unclear how these state-of-the-art measurement techniques will p…
▽ More
The variational quantum eigensolver (VQE) remains one of the most popular near-term quantum algorithms for solving the electronic structure problem. Yet, for its practicality, the main challenge to overcome is improving the quantum measurement efficiency. Numerous quantum measurement techniques have been developed recently, but it is unclear how these state-of-the-art measurement techniques will perform in extensions of VQE for obtaining excited electronic states. Assessing the measurement techniques' performance in the excited state VQE is crucial because the measurement requirements in these extensions are typically much greater than in conventional VQE, as one must measure the expectation value of multiple observables in addition to that of the electronic Hamiltonian. Here, we adapt various measurement techniques to two widely used excited state VQE algorithms: multi-state contraction and quantum subspace expansion. Then, the measurement requirements of each measurement technique are numerically compared. We find that the best methods for multi-state contraction are ones utilizing Hamiltonian data and wavefunction information to minimize the number of measurements. In contrast, randomized measurement techniques are more appropriate for quantum subspace expansion, with many more observables of vastly different energy scales to measure. Nevertheless, when the best possible measurement technique for each excited state VQE algorithm is considered, significantly fewer measurements are required in multi-state contraction than in quantum subspace expansion.
△ Less
Submitted 10 May, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Machine Learning based tool for CMS RPC currents quality monitoring
Authors:
E. Shumka,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
K. Mota Amarilo,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov
, et al. (83 additional authors not shown)
Abstract:
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m…
▽ More
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Improving Metrology with Quantum Scrambling
Authors:
Zeyang Li,
Simone Colombo,
Chi Shu,
Gustavo Velez,
Saúl Pilatowsky-Cameo,
Roman Schmied,
Soonwon Choi,
Mikhail Lukin,
Edwin Pedrozo-Peñafiel,
Vladan Vuletić
Abstract:
Quantum scrambling describes the spreading of local information into many degrees of freedom in quantum systems. This provides the conceptual connection among diverse phenomena ranging from thermalizing quantum dynamics to models of black holes. Here we experimentally probe the exponential scrambling of a multi-particle system near a bistable point in phase space and utilize it for entanglement-en…
▽ More
Quantum scrambling describes the spreading of local information into many degrees of freedom in quantum systems. This provides the conceptual connection among diverse phenomena ranging from thermalizing quantum dynamics to models of black holes. Here we experimentally probe the exponential scrambling of a multi-particle system near a bistable point in phase space and utilize it for entanglement-enhanced metrology. We use a time-reversal protocol to observe a simultaneous exponential growth of both the metrological gain and the out-of-time-order correlator, thereby experimentally verifying the relation between quantum metrology and quantum information scrambling. Our experiments demonstrate that fast-scrambling dynamics capable of exponentially fast entanglement generation are useful for practical metrology, resulting in 6.8(4) dB gain beyond the Standard Quantum Limit.
△ Less
Submitted 4 February, 2023; v1 submitted 24 December, 2022;
originally announced December 2022.
-
RPC based tracking system at CERN GIF++ facility
Authors:
K. Mota Amarilo,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov
, et al. (83 additional authors not shown)
Abstract:
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system…
▽ More
With the HL-LHC upgrade of the LHC machine, an increase of the instantaneous luminosity by a factor of five is expected and the current detection systems need to be validated for such working conditions to ensure stable data taking. At the CERN Gamma Irradiation Facility (GIF++) many muon detectors undergo such studies, but the high gamma background can pose a challenge to the muon trigger system which is exposed to many fake hits from the gamma background. A tracking system using RPCs is implemented to clean the fake hits, taking profit of the high muon efficiency of these chambers. This work will present the tracking system configuration, used detector analysis algorithm and results.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Gate-tunable quantum pathways of high harmonic generation in graphene
Authors:
Soonyoung Cha,
Minjeong Kim,
Youngjae Kim,
Shinyoung Choi,
Sejong Kang,
Hoon Kim,
Sangho Yoon,
Gunho Moon,
Taeho Kim,
Ye Won Lee,
Gil Young Cho,
Moon Jeong Park,
Cheol-Joo Kim,
B. J. Kim,
JaeDong Lee,
Moon-Ho Jo,
Jonghwan Kim
Abstract:
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated…
▽ More
Under strong laser fields, electrons in solids radiate high-harmonic fields by travelling through quantum pathways in Bloch bands in the sub-laser-cycle timescales. Understanding these pathways in the momentum space through the high-harmonic radiation can enable an all-optical ultrafast probe to observe coherent lightwave-driven processes and measure electronic structures as recently demonstrated for semiconductors. However, such demonstration has been largely limited for semimetals because the absence of the bandgap hinders an experimental characterization of the exact pathways. In this study, by combining electrostatic control of chemical potentials with HHG measurement, we resolve quantum pathways of massless Dirac fermions in graphene under strong laser fields. Electrical modulation of HHG reveals quantum interference between the multi-photon interband excitation channels. As the light-matter interaction deviates beyond the perturbative regime, elliptically polarized laser fields efficiently drive massless Dirac fermions via an intricate coupling between the interband and intraband transitions, which is corroborated by our theoretical calculations. Our findings pave the way for strong-laser-field tomography of Dirac electrons in various quantum semimetals and their ultrafast electronics with a gate control.
△ Less
Submitted 16 October, 2022;
originally announced October 2022.
-
Ultra-Wide Bandgap Ga$_2$O$_3$-on-SiC MOSFETs
Authors:
Yiwen Song,
Arkka Bhattacharyya,
Anwarul Karim,
Daniel Shoemaker,
Hsien-Lien Huang,
Saurav Roy,
Craig McGray,
Jacob H. Leach,
**woo Hwang,
Sriram Krishnamoorthy,
Sukwon Choi
Abstract:
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O…
▽ More
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O$_3$/4H-SiC composite wafer using a fusion-bonding method. A low temperature ($\le$ 600 $^{\circ}$C) epitaxy and device processing approach based on low-temperature (LT) metalorganic vapor phase epitaxy is developed to grow a Ga$_2$O$_3$ epitaxial channel layer on the composite wafer and subsequently fabricate into Ga$_2$O$_3$ power MOSFETs. This LT approach is essential to preserve the structural integrity of the composite wafer. These LT-grown epitaxial Ga$_2$O$_3$ MOSFETs deliver high thermal performance (56% reduction in channel temperature), high voltage blocking capabilities up to 2.45 kV, and power figures of merit of $\sim$ 300 MW/cm$^2$, which is a record high for any heterogeneously integrated Ga$_2$O$_3$ devices reported to date. This work is the first realization of multi-kilovolt homoepitaxial Ga$_2$O$_3$ power MOSFETs fabricated on a composite substrate with high heat transfer performance which delivers state-of-the-art power density values while running much cooler than those on native substrates. Thermal characterization and modeling results reveal that a Ga$_2$O$_3$/diamond composite wafer with a reduced Ga$_2$O$_3$ thickness ($\sim$ 1 $μ$m) and thinner bonding interlayer ($<$ 10 nm) can reduce the device thermal impedance to a level lower than today's GaN-on-SiC power switches.
△ Less
Submitted 21 February, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Fluid fermionic fragments for optimizing quantum measurements of electronic Hamiltonians in the variational quantum eigensolver
Authors:
Seonghoon Choi,
Ignacio Loaiza,
Artur F. Izmaylov
Abstract:
Measuring the expectation value of the molecular electronic Hamiltonian is one of the challenging parts of the variational quantum eigensolver. A widely used strategy is to express the Hamiltonian as a sum of measurable fragments using fermionic operator algebra. Such fragments have an advantage of conserving molecular symmetries that can be used for error mitigation. The number of measurements re…
▽ More
Measuring the expectation value of the molecular electronic Hamiltonian is one of the challenging parts of the variational quantum eigensolver. A widely used strategy is to express the Hamiltonian as a sum of measurable fragments using fermionic operator algebra. Such fragments have an advantage of conserving molecular symmetries that can be used for error mitigation. The number of measurements required to obtain the Hamiltonian expectation value is proportional to a sum of fragment variances. Here, we introduce a new method for lowering the fragments' variances by exploiting flexibility in the fragments' form. Due to idempotency of the occupation number operators, some parts of two-electron fragments can be turned into one-electron fragments, which then can be partially collected in a purely one-electron fragment. This repartitioning does not affect the expectation value of the Hamiltonian but has non-vanishing contributions to the variance of each fragment. The proposed method finds the optimal repartitioning by employing variances estimated using a classically efficient proxy for the quantum wavefunction. Numerical tests on several molecules show that repartitioning of one-electron terms lowers the number of measurements by more than an order of magnitude.
△ Less
Submitted 29 December, 2022; v1 submitted 30 August, 2022;
originally announced August 2022.
-
CCAT-prime: The 850 GHz camera for Prime-Cam on FYST
Authors:
Scott C. Chapman,
Anthony I. Huber,
Adrian K. Sinclair,
Jordan D. Wheeler,
Jason E. Austermann,
James Beall,
James Burgoyne,
Steve K. Choi,
Abigail Crites,
Cody J. Duell,
Jesslyn Devina,
Jiansong Gao,
Mike Fich,
Doug Henke,
Terry Herter,
Doug Johnstone,
Lewis B. G. Knee,
Michael D. Niemack,
Kayla M. Rossi,
Gordon Stacey,
Joel Tsuchitori,
Joel Ullom,
Jeff Van Lanen,
Eve M. Vavagiakis,
Michael Vissers
, et al. (1 additional authors not shown)
Abstract:
The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be t…
▽ More
The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be the highest frequency module in Prime-Cam and the most novel for astronomical and cosmological surveys, taking full advantage of the atmospheric transparency at the high 5600 meter CCAT-prime siting on Cerro Chajnantor. With a 1.1 deg diameter field, the 850 GHz module will deploy ~40,000 Kinetic Inductance Detectors (KIDs) with Silicon platelet feedhorn coupling (both fabricated at NIST), and will provide unprecedented broadband intensity and polarization measurement capabilities. The 850 GHz module will be key to addressing pressing astrophysical questions regarding galaxy formation, Big Bang cosmology, and star formation within our own Galaxy. We present the motivation and overall design for the module, and initial laboratory characterization.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
CCAT-prime: Optical and cryogenic design of the 850 GHz module for Prime-Cam
Authors:
Anthony I. Huber,
Scott C. Chapman,
Adrian K. Sinclair,
Locke D. Spencer,
Jason E. Austermann,
Steve K. Choi,
Jesslyn Devina,
Patricio A. Gallardo,
Doug Henke,
Zachary B. Huber,
Ben Keller,
Yaqiong Li,
Lawrence T. Lin,
Mike Niemack,
Kayla M. Rossi,
Eve M. Vavagiakis,
Jordan D. Wheeler
Abstract:
Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical desi…
▽ More
Prime-Cam is a first-generation instrument for the Cerro Chajnantor Atacama Telescope-prime (CCAT-prime) Facility. The 850$~$GHz module for Prime-Cam will probe the highest frequency of all the instrument modules. We describe the parameter space of the 850$~$GHz optical system between the F$λ$ spacing, beam size, pixel sensitivity, and detector count. We present the optimization of an optical design for the 850$~$GHz instrument module for CCAT-prime. We further describe the development of the cryogenic RF chain design to accommodate $>$30 readout lines to read 41,400 kinetic inductance detectors (KIDs) within the cryogenic testbed.
△ Less
Submitted 19 August, 2022;
originally announced August 2022.
-
CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors
Authors:
Adrian K. Sinclair,
Ryan C. Stephenson,
Cody A. Roberson,
Eric L. Weeks,
James Burgoyne,
Anthony I. Huber,
Philip M. Mauskopf,
Scott C. Chapman,
Jason E. Austermann,
Steve K. Choi,
Cody J. Duell,
Michel Fich,
Christopher E. Groppi,
Zachary Huber,
Michael D. Niemack,
Thomas Nikola,
Kayla M. Rossi,
Adhitya Sriram,
Gordon J. Stacey,
Erik Szakiel,
Joel Tsuchitori,
Eve M. Vavagiakis,
Jordan D. Wheeler,
the CCAT-prime collaboration
Abstract:
The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every ca…
▽ More
The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
On the classical reaction rate and the first-time problems of Brownian motion
Authors:
Aihua Zhang,
Sun Choi
Abstract:
We have developed efficient techniques to solve the first-time problems of Brownian motion. Based on a time-scale separation of recrossings, we show that Eyring's transmission coefficient ($κ$) equals to the one ($κ_\mathrm{V}$) corresponding to an absorbing boundary consistent with the transition state theory, which is greater than the one ($κ_\mathrm{K}$) derived by Kramers. We also propose meth…
▽ More
We have developed efficient techniques to solve the first-time problems of Brownian motion. Based on a time-scale separation of recrossings, we show that Eyring's transmission coefficient ($κ$) equals to the one ($κ_\mathrm{V}$) corresponding to an absorbing boundary consistent with the transition state theory, which is greater than the one ($κ_\mathrm{K}$) derived by Kramers. We also propose methods for reaction rate determination by analyzing short-time trajectories from the barrier maximum, and discuss the relation to the reactive flux method and the significance of reaction coordinates.
△ Less
Submitted 8 May, 2023; v1 submitted 13 August, 2022;
originally announced August 2022.
-
Improving quantum measurements by introducing "ghost" Pauli products
Authors:
Seonghoon Choi,
Tzu-Ching Yen,
Artur F. Izmaylov
Abstract:
Reducing the number of measurements required to estimate the expectation value of an observable is crucial for the variational quantum eigensolver to become competitive with state-of-the-art classical algorithms. To measure complicated observables such as a molecular electronic Hamiltonian, one of the common strategies is to partition the observable into linear combinations (fragments) of mutually…
▽ More
Reducing the number of measurements required to estimate the expectation value of an observable is crucial for the variational quantum eigensolver to become competitive with state-of-the-art classical algorithms. To measure complicated observables such as a molecular electronic Hamiltonian, one of the common strategies is to partition the observable into linear combinations (fragments) of mutually commutative Pauli products. The total number of measurements for obtaining the expectation value is then proportional to the sum of variances of individual fragments. We propose a method that lowers individual fragment variances by modifying the fragments without changing the total observable expectation value. Our approach is based on adding Pauli products ("ghosts") that are compatible with members of multiple fragments. The total expectation value does not change because a sum of coefficients for each "ghost" Pauli product introduced to several fragments is zero. Yet, these additions change individual fragment variances because of the non-vanishing contributions of "ghost" Pauli products within each fragment. The proposed algorithm minimizes individual fragment variances using a classically efficient approximation of the quantum wavefunction for variance estimations. Numerical tests on a few molecular electronic Hamiltonian expectation values show several-fold reductions in the number of measurements in the "ghost" Pauli algorithm compared to those in the other recently developed techniques.
△ Less
Submitted 24 November, 2022; v1 submitted 12 August, 2022;
originally announced August 2022.
-
Boosting thermal conductivity by surface plasmon polaritons propagating along a thin Ti film
Authors:
Dong-min Kim,
Sinwoo Choi,
Jungwan Cho,
Mikyung Lim,
Bong Jae Lee
Abstract:
We experimentally demonstrate a boosted in-plane thermal conduction by surface plasmon polaritons (SPPs) propagating along a thin Ti film on a glass substrate. Owing to a lossy nature of metal, SPPs can propagate over centimeter-scale distance even with a supported metal film, and resulting ballistic heat conduction can be quantitatively validated. Further, for a 100-nm-thick Ti film on glass subs…
▽ More
We experimentally demonstrate a boosted in-plane thermal conduction by surface plasmon polaritons (SPPs) propagating along a thin Ti film on a glass substrate. Owing to a lossy nature of metal, SPPs can propagate over centimeter-scale distance even with a supported metal film, and resulting ballistic heat conduction can be quantitatively validated. Further, for a 100-nm-thick Ti film on glass substrate, a significant enhancement of in-plane thermal conductivity compared to bulk value ($\sim 35\%$) is experimentally shown. This study will provide a new avenue to employ SPPs for heat dissipation along a supported thin film, which can be readily applied to mitigate hot-spot issues in microelectronics.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
Atomically imprinted graphene plasmonic cavities
Authors:
Brian S. Y. Kim,
Aaron J. Sternbach,
Min Sup Choi,
Zhiyuan Sun,
Francesco L. Ruta,
Yinming Shao,
Alexander S. McLeod,
Lin Xiong,
Yinan Dong,
Anjaly Rajendran,
Song Liu,
Ankur Nipane,
Sang Hoon Chae,
Amirali Zangiabadi,
Xiaodong Xu,
Andrew J. Millis,
P. James Schuck,
Cory. R. Dean,
James C. Hone,
D. N. Basov
Abstract:
Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene p…
▽ More
Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene plasmonic structures using oxidation-activated charge transfer (OCT). We cover graphene with a monolayer of WSe$_2$, which is subsequently oxidized into high work-function WOx to activate charge transfer. Nano-infrared imaging reveals low-loss plasmon polaritons at the WOx/graphene interface. We insert WSe$_2$ spacers to precisely control the OCT-induced carrier density and achieve a near-intrinsic quality factor of plasmons. Finally, we imprint canonical plasmonic cavities exhibiting laterally abrupt do** profiles with single-digit nanoscale precision via programmable OCT. Specifically, we demonstrate technologically appealing but elusive plasmonic whispering-gallery resonators based on free-standing graphene encapsulated in WOx. Our results open avenues for novel quantum photonic architectures incorporating two-dimensional materials.
△ Less
Submitted 25 June, 2022;
originally announced June 2022.
-
Benchmarking Quantum Simulators using Ergodic Quantum Dynamics
Authors:
Daniel K. Mark,
Joonhee Choi,
Adam L. Shaw,
Manuel Endres,
Soonwon Choi
Abstract:
We propose and analyze a sample-efficient protocol to estimate the fidelity between an experimentally prepared state and an ideal target state, applicable to a wide class of analog quantum simulators without advanced sophisticated spatiotemporal control. Our approach utilizes newly discovered universal fluctuations emerging from generic Hamiltonian dynamics, and it does not require any fine-tuned…
▽ More
We propose and analyze a sample-efficient protocol to estimate the fidelity between an experimentally prepared state and an ideal target state, applicable to a wide class of analog quantum simulators without advanced sophisticated spatiotemporal control. Our approach utilizes newly discovered universal fluctuations emerging from generic Hamiltonian dynamics, and it does not require any fine-tuned control over state preparation, quantum evolution, or readout capability. It only needs a small number of experimental measurements, achieving near optimal sample complexity: in ideal cases, a percent-level precision is obtained with $\sim 10^3$ measurements independent of system size. Furthermore, the accuracy of our fidelity estimation improves with increasing system size. We numerically demonstrate our protocol for a variety of quantum simulator platforms such as itinerant particles on optical lattices, trapped ions, and Rydberg atoms. We discuss further applications of our method for advanced tasks such as multi-parameter estimation of quantum states and processes.
△ Less
Submitted 16 August, 2023; v1 submitted 24 May, 2022;
originally announced May 2022.
-
Time-multiplexed Neural Holography: A flexible framework for holographic near-eye displays with fast heavily-quantized spatial light modulators
Authors:
Suyeon Choi,
Manu Gopakumar,
Yifan,
Peng,
Jonghyun Kim,
Matthew O'Toole,
Gordon Wetzstein
Abstract:
Holographic near-eye displays offer unprecedented capabilities for virtual and augmented reality systems, including perceptually important focus cues. Although artificial intelligence--driven algorithms for computer-generated holography (CGH) have recently made much progress in improving the image quality and synthesis efficiency of holograms, these algorithms are not directly applicable to emergi…
▽ More
Holographic near-eye displays offer unprecedented capabilities for virtual and augmented reality systems, including perceptually important focus cues. Although artificial intelligence--driven algorithms for computer-generated holography (CGH) have recently made much progress in improving the image quality and synthesis efficiency of holograms, these algorithms are not directly applicable to emerging phase-only spatial light modulators (SLM) that are extremely fast but offer phase control with very limited precision. The speed of these SLMs offers time multiplexing capabilities, essentially enabling partially-coherent holographic display modes. Here we report advances in camera-calibrated wave propagation models for these types of holographic near-eye displays and we develop a CGH framework that robustly optimizes the heavily quantized phase patterns of fast SLMs. Our framework is flexible in supporting runtime supervision with different types of content, including 2D and 2.5D RGBD images, 3D focal stacks, and 4D light fields. Using our framework, we demonstrate state-of-the-art results for all of these scenarios in simulation and experiment.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
MolNet: A Chemically Intuitive Graph Neural Network for Prediction of Molecular Properties
Authors:
Yeji Kim,
Yoonho Jeong,
Jihoo Kim,
Eok Kyun Lee,
Won June Kim,
Insung S. Choi
Abstract:
The graph neural network (GNN) has been a powerful deep-learning tool in chemistry domain, due to its close connection with molecular graphs. Most GNN models collect and update atom and molecule features from the fed atom (and, in some cases, bond) features, which are basically based on the two-dimensional (2D) graph representation of 3D molecules. Correspondingly, the adjacency matrix, containing…
▽ More
The graph neural network (GNN) has been a powerful deep-learning tool in chemistry domain, due to its close connection with molecular graphs. Most GNN models collect and update atom and molecule features from the fed atom (and, in some cases, bond) features, which are basically based on the two-dimensional (2D) graph representation of 3D molecules. Correspondingly, the adjacency matrix, containing the information on covalent bonds, or equivalent data structures (e.g., lists) have been the main core in the feature-updating processes, such as graph convolution. However, the 2D-based models do not faithfully represent 3D molecules and their physicochemical properties, exemplified by the overlooked field effect that is a "through-space" effect, not a "through-bond" effect. The GNN model proposed herein, denoted as MolNet, is chemically intuitive, accommodating the 3D non-bond information in a molecule, with a noncovalent adjacency matrix $\bf{\bar A}$, and also bond-strength information from a weighted bond matrix $\bf{B}$. The noncovalent atoms, not directly bonded to a given atom in a molecule, are identified within 5 $\unicode{x212B}$ of cut-off range for the construction of $\bf{\bar A}$, and $\bf{B}$ has edge weights of 1, 1.5, 2, and 3 for single, aromatic, double, and triple bonds, respectively. Comparative studies show that MolNet outperforms various baseline GNN models and gives a state-of-the-art performance in the classification task of BACE dataset and regression task of ESOL dataset. This work suggests a future direction of deep-learning chemistry in the construction of deep-learning models that are chemically intuitive and comparable with the existing chemistry concepts and tools.
△ Less
Submitted 1 February, 2022;
originally announced March 2022.
-
Quantum Optimization of Maximum Independent Set using Rydberg Atom Arrays
Authors:
Sepehr Ebadi,
Alexander Keesling,
Madelyn Cain,
Tout T. Wang,
Harry Levine,
Dolev Bluvstein,
Giulia Semeghini,
Ahmed Omran,
**guo Liu,
Rhine Samajdar,
Xiu-Zhe Luo,
Beatrice Nash,
Xun Gao,
Boaz Barak,
Edward Farhi,
Subir Sachdev,
Nathan Gemelke,
Leo Zhou,
Soonwon Choi,
Hannes Pichler,
Shengtao Wang,
Markus Greiner,
Vladan Vuletic,
Mikhail D. Lukin
Abstract:
Realizing quantum speedup for practically relevant, computationally hard problems is a central challenge in quantum information science. Using Rydberg atom arrays with up to 289 qubits in two spatial dimensions, we experimentally investigate quantum algorithms for solving the Maximum Independent Set problem. We use a hardware-efficient encoding associated with Rydberg blockade, realize closed-loop…
▽ More
Realizing quantum speedup for practically relevant, computationally hard problems is a central challenge in quantum information science. Using Rydberg atom arrays with up to 289 qubits in two spatial dimensions, we experimentally investigate quantum algorithms for solving the Maximum Independent Set problem. We use a hardware-efficient encoding associated with Rydberg blockade, realize closed-loop optimization to test several variational algorithms, and subsequently apply them to systematically explore a class of graphs with programmable connectivity. We find the problem hardness is controlled by the solution degeneracy and number of local minima, and experimentally benchmark the quantum algorithm's performance against classical simulated annealing. On the hardest graphs, we observe a superlinear quantum speedup in finding exact solutions in the deep circuit regime and analyze its origins.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Optics-less beam control of EUV high harmonics generated from solids
Authors:
Byunggi Kim,
Seungman Choi,
Yong Woo Kim,
Seung Jai Won,
Young-** Kim,
Seung-Woo Kim
Abstract:
High harmonics generation (HHG) of coherent extreme ultraviolet (EUV) radiation enables ultrafast pump-probe spectroscopy with attosecond-scale timing resolutions. Yet beam control of generated EUV radiation remains a major challenge for handy implementation of ultrafast spectroscopy particularly for nano-micro samples. Here, we demonstrate a solid-based HHG scheme that incorporates non-collinear…
▽ More
High harmonics generation (HHG) of coherent extreme ultraviolet (EUV) radiation enables ultrafast pump-probe spectroscopy with attosecond-scale timing resolutions. Yet beam control of generated EUV radiation remains a major challenge for handy implementation of ultrafast spectroscopy particularly for nano-micro samples. Here, we demonstrate a solid-based HHG scheme that incorporates non-collinear illumination to perform the propagation control of EUV harmonics by wavefront phase manipulation via a spatial light modulator. Further, our solid-based non-collinear HHG scheme converts EUV harmonics to Bessel beams without extra optics for beam focusing, offering a useful tool for diverse EUV applications of metrology and fabrication.
△ Less
Submitted 28 November, 2021;
originally announced November 2021.
-
The Simons Observatory: Magnetic Shielding Measurements for the Universal Multiplexing Module
Authors:
Zachary B. Huber,
Yaqiong Li,
Eve M. Vavagiakis,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Cody J. Duell,
Nicholas Galitzki,
Erin Healy,
Johannes Hubmayr,
Bradley R. Johnson,
Benjamin Keller,
Heather McCarrick,
Michael D. Niemack,
Yuhan Wang,
Zhilei Xu,
Kaiwen Zheng
Abstract:
The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field…
▽ More
The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field pickup and that it is hard to predict how they will respond to such fields, it is important to characterize the magnetic response of these systems empirically. This information can then be used to limit spurious signals by informing magnetic shielding designs for the detectors and readout. This paper focuses on measurements of magnetic pickup with different magnetic shielding configurations for the SO universal multiplexing module (UMM), which contains the SQUIDs, associated resonators, and TES bias circuit. The magnetic pickup of a prototype UMM was tested under three shielding configurations: no shielding (copper packaging), aluminum packaging for the UMM, and a tin/lead-plated shield surrounding the entire dilution refrigerator 100 mK cold stage. The measurements show that the aluminum packaging outperforms the copper packaging by a shielding factor of 8-10, and adding the tin/lead-plated 1K shield further increases the relative shielding factor in the aluminum configuration by 1-2 orders of magnitude.
△ Less
Submitted 1 March, 2023; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Simons Observatory Focal-Plane Module: In-lab Testing and Characterization Program
Authors:
Yuhan Wang,
Kaiwen Zheng,
Zachary Atkins,
Jason Austermann,
Tanay Bhandarkar,
Steve K. Choi,
Shannon M. Duff,
Daniel Dutcher,
Nicholas Galitzki,
Erin Healy,
Zachary B. Huber,
Johannes Hubmayr,
Bradley R. Johnson,
Jack Lashner,
Yaqiong Li,
Heather McCarrick,
Michael D. Niemack,
Joseph Seibert,
Maximiliano Silva-Feaver,
Rita Sonka,
Suzanne T. Staggs,
Eve Vavagiakis,
Zhilei Xu
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background instrument to be sited in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor bolometers in 49 separate focal-plane modules across a suite of four telescopes covering three dichroic bands termed low frequency (LF), mid frequency (MF) and ultra-high frequency (UHF). Each MF and UHF focal-plane module pac…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background instrument to be sited in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor bolometers in 49 separate focal-plane modules across a suite of four telescopes covering three dichroic bands termed low frequency (LF), mid frequency (MF) and ultra-high frequency (UHF). Each MF and UHF focal-plane module packages 1720 optical detectors and corresponding 100 mK microwave SQUID multiplexing readout components. In this paper we describe the testing program we have developed for high-throughput validation of the modules after they are assembled. The validation requires measurements of the yield, saturation powers, time constants, noise properties and optical efficiencies. Additional measurements will be performed for further characterizations as needed. We describe the methods developed and demonstrate preliminary results from initial testing of prototype modules.
△ Less
Submitted 5 July, 2022; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Three-year annual modulation search with COSINE-100
Authors:
COSINE-100 Collaboration,
:,
G. Adhikari,
E. Barbosa de Souza,
N. Carlin,
J. J. Choi,
S. Choi,
A. C. Ezeribe,
L. E. França,
C. Ha,
I. S. Hahn,
S. J. Hollick,
E. J. Jeon,
J. H. Jo,
H. W. Joo,
W. G. Kang,
M. Kauer,
H. Kim,
H. J. Kim,
J. Kim,
K. W. Kim,
S. H. Kim,
S. K. Kim,
W. K. Kim,
Y. D. Kim
, et al. (34 additional authors not shown)
Abstract:
COSINE-100 is a direct detection dark matter experiment that aims to test DAMA/LIBRA's claim of dark matter discovery by searching for a dark matter-induced annual modulation signal with NaI(Tl) detectors. We present new constraints on the annual modulation signal from a dataset with a 2.82 yr livetime utilizing an active mass of 61.3 kg, for a total exposure of 173 kg$\cdot$yr. This new result fe…
▽ More
COSINE-100 is a direct detection dark matter experiment that aims to test DAMA/LIBRA's claim of dark matter discovery by searching for a dark matter-induced annual modulation signal with NaI(Tl) detectors. We present new constraints on the annual modulation signal from a dataset with a 2.82 yr livetime utilizing an active mass of 61.3 kg, for a total exposure of 173 kg$\cdot$yr. This new result features an improved event selection that allows for both lowering the energy threshold to 1 keV and a more precise time-dependent background model. In the 1-6 keV and 2-6 keV energy intervals, we observe best-fit values for the modulation amplitude of 0.0067$\pm$0.0042 and 0.0051$\pm$0.0047 counts/(day$\cdot$kg$\cdot$keV), respectively, with a phase fixed at 152.5 days.
△ Less
Submitted 28 October, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
Intra-instrument channel workable, optical- resolution photoacoustic and ultrasonic mini-probe system for clinical gastrointestinal endoscopy
Authors:
Minjae Kim,
Kang Won Lee,
KiSik Kim,
Oleksandra Gulenko,
Cheol Lee,
Bora Keum,
Hoon Jai Chun,
Hyuk Soon Choi,
Chae Un Kim,
Joon-Mo Yang
Abstract:
There has been a longstanding expectation that the optical resolution embodiment of photoacoustic tomography could have a substantial impact on gastrointestinal endoscopy by enabling microscopic visualization of the vasculature based on the endogenous contrast mechanism. Although multiple studies have demonstrated the in vivo imaging capability of a developed imaging device over the last decade, t…
▽ More
There has been a longstanding expectation that the optical resolution embodiment of photoacoustic tomography could have a substantial impact on gastrointestinal endoscopy by enabling microscopic visualization of the vasculature based on the endogenous contrast mechanism. Although multiple studies have demonstrated the in vivo imaging capability of a developed imaging device over the last decade, the implementation of such an endoscopic system that can be applied immediately when necessary via the instrument channel of a video endoscope has been a challenge. In this study, we developed a 3.38 mm diameter catheter based, integrated optical resolution photoacoustic and ultrasonic miniprobe system and successfully demonstrated its intrainstrument channel workability for the standard 3.7 mm diameter instrument channel of a clinical video endoscope based on a swine model. Through the instrument channel, we acquired the first in vivo photoacoustic and ultrasonic dual mode endoscopic images from the esophagogastric junction, which is one of the most frequently cited anatomical sites in the gastrointestinal tract in relation to Barretts esophagus. Moreover, from a rat colorectum in vivo imaging experiment, we visualized hierarchically developed mesh like capillary networks with a hole size as small as 50 microns, which suggests the potential level of image details that could be photoacoustically provided in clinical settings in the future.
△ Less
Submitted 18 October, 2021;
originally announced October 2021.