Showing 1–36 of 36 results for author: Cho, M

Plasma screening in mid-charged ions observed by K-shell line emission

Authors: M. Šmıd, O. Humphries, C. Baehtz, E. Brambrink, T. Burian, M. S. Cho, T. E. Cowan, L. Gaus, V. Hájková, L. Juha, Z. Konopkova, H. P. Le, M. Makita, X. Pan, T. Preston, A. Schropp, H. A. Scott, R. Štefanıková, J. Vorberger, W. Wang, U. Zastrau, K. Falk

Abstract: Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transiti… ▽ More Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transitions in matter driven by the x-ray free electron laser (XFEL). This was enabled by identification of detailed electronic configurations of the observed Kα, K\b{eta} and Kγ lines. This work paves the way for improving plasma screening models including connected effects like ionization potential depression and continuum lowering, which will advance the understanding of atomic physics in Warm Dense Matter regime. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Stimulated Raman-induced Beam Focusing

Authors: Minhaeng Cho

Abstract: Stimulated Raman scattering, employing a pump and a Stokes beam, exhibits itself through both the Raman loss observed in the pump beam and the Raman gain in the Stokes beam. This phenomenon finds application in spectroscopy for chemical analyses and microscopy for label-free bioimaging studies. Recent efforts have been made to implement super-resolution Raman microscopy using a doughnut-shaped pum… ▽ More Stimulated Raman scattering, employing a pump and a Stokes beam, exhibits itself through both the Raman loss observed in the pump beam and the Raman gain in the Stokes beam. This phenomenon finds application in spectroscopy for chemical analyses and microscopy for label-free bioimaging studies. Recent efforts have been made to implement super-resolution Raman microscopy using a doughnut-shaped pump, Stokes, or depletion beam. In this study, it is shown that the amplitude and phase of the pump or Stokes beam undergo significant modulation through the stimulated Raman process when they are configured as one of the higher-order Laguerre-Gauss modes, achieved using appropriate spiral phase plates or spatial light modulators. The resulting intensity distributions of the pump and Stokes beams are determined by a superposition of multiple Laguerre-Gauss modes that are coupled through nonlinear Raman gain and loss processes. Calculation results are used to elucidate the limitations associated with super-resolution coherent Raman imaging with a toroidal pump or Stokes beam. This stands in contrast with the stimulated emission depletion fluorescence microscopy technique, which lacks a fundamental limit in the spatial resolution enhancement. △ Less

Submitted 23 May, 2024; originally announced May 2024.

Transport Dynamics of Water Molecules Confined between Lipid Membranes

Authors: Minho Lee, Euihyun Lee, Ji-Hyun Kim, Hyonseok Hwang, Minhaeng Cho, Jaeyoung Sung

Abstract: Water molecules confined between biological membranes exhibit a distinctive non-Gaussian displacement distribution, far different from bulk water. Here, we introduce a new transport equation for water molecules in the intermembrane space, quantitatively explaining molecular dynamics simulation results. We find the unique transport dynamics of water molecules stems from the lateral diffusion coeffi… ▽ More Water molecules confined between biological membranes exhibit a distinctive non-Gaussian displacement distribution, far different from bulk water. Here, we introduce a new transport equation for water molecules in the intermembrane space, quantitatively explaining molecular dynamics simulation results. We find the unique transport dynamics of water molecules stems from the lateral diffusion coefficient fluctuation caused by their longitudinal motion. We also identify an interfacial region where water possesses distinct physical properties, unaffected by changes in the intermembrane separation. △ Less

Submitted 18 April, 2024; v1 submitted 24 January, 2024; originally announced January 2024.

Comments: 4 figures in main text, 4 figures in Supplemental Material, 1 Supplemental Video

Numerical Investigation of Non-equilibrium Electron Effects on the Collisional Ionization Rate in the Collisional-Radiative Model

Authors: M. S. Cho, H. -K. Chung, M. E. Foord, S. B. Libby, B. I. Cho

Abstract: The interplay of kinetic electron physics and atomic processes in ultrashort laser-plasma interactions provides a comprehensive understanding of electron energy distribution's impact on plasma properties. Notably, non-equilibrium electrons play a vital role in collisional ionization, influencing ionization degrees and spectra. This paper introduces a computational model that integrates the physics… ▽ More The interplay of kinetic electron physics and atomic processes in ultrashort laser-plasma interactions provides a comprehensive understanding of electron energy distribution's impact on plasma properties. Notably, non-equilibrium electrons play a vital role in collisional ionization, influencing ionization degrees and spectra. This paper introduces a computational model that integrates the physics of kinetic electrons and atomic processes, utilizing a Boltzmann equation for non-equilibrium electrons and a collisional-radiative model for atomic state populations. The model is used to investigate the influence of non-equilibrium electrons on collisional ionization rates and their effect on population distribution, as demonstrated by L. Young et al. (Nature, 2010). The study reveals significant non-equilibrium electron presence during XFEL-matter interactions, profoundly affecting collisional ionization rates in the gas plasma, thereby necessitating careful consideration of the Collisional-Radiative (CR) model applied to such systems. △ Less

Submitted 25 March, 2024; v1 submitted 1 December, 2023; originally announced December 2023.

Comments: 9 pages, 3 figures

Report number: LLNL-JRNL-857133

High-resolution 3D phase-contrast imaging beyond the depth of field limit via ptychographic multi-slice electron tomography

Authors: Andrey Romanov, Min Gee Cho, Mary Cooper Scott, Colin Ophus, Philipp Pelz

Abstract: Resolving single atoms in large-scale volumes has been a goal for atomic resolution microscopy for a long time. Electron microscopy has come close to this goal using a combination of advanced electron optics and computational imaging algorithms. However, atomic-resolution 3D imaging in volumes larger than the depth of field limit of the electron optics has so far been out of reach. Electron ptycho… ▽ More Resolving single atoms in large-scale volumes has been a goal for atomic resolution microscopy for a long time. Electron microscopy has come close to this goal using a combination of advanced electron optics and computational imaging algorithms. However, atomic-resolution 3D imaging in volumes larger than the depth of field limit of the electron optics has so far been out of reach. Electron ptychography, a computational imaging method allowing to solve the multiple-scattering problem from position- and momentum-resolved measurements, provides the opportunity to surpass this limit. Here, we experimentally demonstrate atomic resolution three-dimensional phase-contrast imaging in a volume surpassing the depth of field limits using multi-slice ptychographic electron tomography. We reconstruct tilt-series 4D-STEM measurements of a Co3O4 nanocube, yielding 1.75 Å resolution in a reconstructed volume of (18.2nm)^3. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: 15 pages

The physical origin of aneurysm growth, dissection, and rupture

Authors: Tom Y. Zhao, **-Tae Kim, Min Cho, Akhil Narang, John A. Rogers, Neelesh A. Patankar

Abstract: Rupture of aortic aneurysms is by far the most fatal heart disease, with a mortality rate exceeding 80%. There are no reliable clinical protocols to predict growth, dissection, and rupture because the fundamental physics driving aneurysm progression is unknown. Here, via in-vitro experiments, we show that a blood-wall, fluttering instability manifests in synthetic arteries under pulsatile forcing.… ▽ More Rupture of aortic aneurysms is by far the most fatal heart disease, with a mortality rate exceeding 80%. There are no reliable clinical protocols to predict growth, dissection, and rupture because the fundamental physics driving aneurysm progression is unknown. Here, via in-vitro experiments, we show that a blood-wall, fluttering instability manifests in synthetic arteries under pulsatile forcing. We establish a phase space to prove that the transition from stable flow to unstable aortic flutter is accurately predicted by a flutter instability parameter derived from first principles. Time resolved strain maps of the evolving system reveal the dynamical characteristics of aortic flutter that drive aneurysm progression. We show that low level instability can trigger permanent aortic growth, even in the absence of material remodeling. Sufficiently large flutter beyond a secondary threshold localizes strain in the walls to the length scale clinically observed in aortic dissection. Lastly, significant physical flutter beyond a tertiary threshold can ultimately induce aneurysm rupture via failure modes reported from necropsy. Resolving the fundamental physics of aneurysm progression directly leads to clinical protocols that forecast growth as well as intercept dissection and rupture by pinpointing their physical origin. △ Less

Submitted 1 November, 2023; originally announced November 2023.

Bootstrap** the Stochastic Resonance

Authors: Minjae Cho

Abstract: Stochastic resonance is a phenomenon where a noise of appropriate intensity enhances the input signal strength. In this work, by employing the recently developed convex optimization methods in the context of dynamical systems and stochastic processes, we derive rigorous two-sided bounds on the expected power at the input signal frequency for the prototypical example of stochastic resonance, the do… ▽ More Stochastic resonance is a phenomenon where a noise of appropriate intensity enhances the input signal strength. In this work, by employing the recently developed convex optimization methods in the context of dynamical systems and stochastic processes, we derive rigorous two-sided bounds on the expected power at the input signal frequency for the prototypical example of stochastic resonance, the double-well potential with periodic forcing and Gaussian white noise. △ Less

Submitted 20 September, 2023; v1 submitted 12 September, 2023; originally announced September 2023.

Comments: 7 pages, 5 figures. v2: typo corrected, acknowledgement added

Imaging 3D Chemistry at 1 nm Resolution with Fused Multi-Modal Electron Tomography

Authors: Jonathan Schwartz, Zichao Wendy Di, Yi Jiang, Jason Manassa, Jacob Pietryga, Yiwen Qian, Min Gee Cho, Jonathan L. Rowell, Huihuo Zheng, Richard D. Robinson, Junsi Gu, Alexey Kirilin, Steve Rozeveld, Peter Ercius, Jeffrey A. Fessler, Ting Xu, Mary Scott, Robert Hovden

Abstract: Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment completes. Even larger doses are required to achieve high resolution. Thus, chemical map** in 3D has been… ▽ More Measuring the three-dimensional (3D) distribution of chemistry in nanoscale matter is a longstanding challenge for metrological science. The inelastic scattering events required for 3D chemical imaging are too rare, requiring high beam exposure that destroys the specimen before an experiment completes. Even larger doses are required to achieve high resolution. Thus, chemical map** in 3D has been unachievable except at lower resolution with the most radiation-hard materials. Here, high-resolution 3D chemical imaging is achieved near or below one nanometer resolution in a Au-Fe$_3$O$_4$ metamaterial, Co$_3$O$_4$ - Mn$_3$O$_4$ core-shell nanocrystals, and ZnS-Cu$_{0.64}$S$_{0.36}$ nanomaterial using fused multi-modal electron tomography. Multi-modal data fusion enables high-resolution chemical tomography often with 99\% less dose by linking information encoded within both elastic (HAADF) and inelastic (EDX / EELS) signals. Now sub-nanometer 3D resolution of chemistry is measurable for a broad class of geometrically and compositionally complex materials. △ Less

Submitted 18 June, 2024; v1 submitted 24 April, 2023; originally announced April 2023.

Journal ref: Nat Commun 15, 3555 (2024)

Axial Profiling of Interferometric Scattering Enables an Accurate Determination of Nanoparticle Size

Authors: Kateřina Žambochová, Il-Buem Lee, **-Sung Park, Seok-Cheol Hong, Minhaeng Cho

Abstract: Interferometric scattering (iSCAT) microscopy has undergone significant development in recent years. It is a promising technique for imaging and tracking nanoscopic label-free objects with nanometer localization precision. The current iSCAT-based photometry technique allows quantitative estimation for the size of a nanoparticle by measuring iSCAT contrast and has been successfully applied to nano-… ▽ More Interferometric scattering (iSCAT) microscopy has undergone significant development in recent years. It is a promising technique for imaging and tracking nanoscopic label-free objects with nanometer localization precision. The current iSCAT-based photometry technique allows quantitative estimation for the size of a nanoparticle by measuring iSCAT contrast and has been successfully applied to nano-objects smaller than the Rayleigh scattering limit. Here we provide an alternative method that overcomes such size limitations. We take into account the axial variation of iSCAT contrast and utilize a vectorial point spread function model to uncover the position of a scattering dipole and, consequently, the size of the scatterer, which is not limited to the Rayleigh limit. We found that our technique accurately measures the size of spherical dielectric nanoparticles in a purely optical and non-contact way. We also tested fluorescent nanodiamonds (fND) and obtained a reasonable estimate for the size of fND particles. Together with fluorescence measurement from fND, we observed a correlation between the fluorescent signal and the size of fND. Our results showed that the axial pattern of iSCAT contrast provides sufficient information for the size of spherical particles. Our method enables us to measure the size of nanoparticles from tens of nanometers and beyond the Rayleigh limit with nanometer precision, making a versatile all-optical nanometric technique. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Comments: 8 pages, 4 figures in manuscript, and 12 pages, 9 figures in supplementary information

PAC-Net: A Model Pruning Approach to Inductive Transfer Learning

Authors: Sanghoon Myung, In Huh, Wonik Jang, Jae Myung Choe, Jisu Ryu, Dae Sin Kim, Kee-Eung Kim, Changwook Jeong

Abstract: Inductive transfer learning aims to learn from a small amount of training data for the target task by utilizing a pre-trained model from the source task. Most strategies that involve large-scale deep learning models adopt initialization with the pre-trained model and fine-tuning for the target task. However, when using over-parameterized models, we can often prune the model without sacrificing the… ▽ More Inductive transfer learning aims to learn from a small amount of training data for the target task by utilizing a pre-trained model from the source task. Most strategies that involve large-scale deep learning models adopt initialization with the pre-trained model and fine-tuning for the target task. However, when using over-parameterized models, we can often prune the model without sacrificing the accuracy of the source task. This motivates us to adopt model pruning for transfer learning with deep learning models. In this paper, we propose PAC-Net, a simple yet effective approach for transfer learning based on pruning. PAC-Net consists of three steps: Prune, Allocate, and Calibrate (PAC). The main idea behind these steps is to identify essential weights for the source task, fine-tune on the source task by updating the essential weights, and then calibrate on the target task by updating the remaining redundant weights. Under the various and extensive set of inductive transfer learning experiments, we show that our method achieves state-of-the-art performance by a large margin. △ Less

Submitted 19 June, 2022; v1 submitted 12 June, 2022; originally announced June 2022.

Comments: In Proceedings of the 39th International Conference on Machine Learning, Baltimore, Maryland, USA, PMLR 162, 2022

Statistical analysis of hard X-ray radiation at PAL-XFEL facility performed by Hanbury Brown and Twiss interferometry

Authors: Young Yong Kim, Ruslan Khubbutdinov, Jerome Carnis, Sangsoo Kim, Daewoong Nam, Inhyuk Nam, Gyu** Kim, Chi Hyun Shim, Haeryong Yang, Myunghoon Cho, Chang-Ki Min, Changbum Kim, Heung-Sik Kang, Ivan Vartanyants

Abstract: Hanbury Brown and Twiss interferometry experiment based on second-order correlations was performed at PAL-XFEL facility. The statistical properties of the X-ray radiation were studied within this experiment. Measurements were performed at NCI beamline at 10 keV photon energy in various operation conditions: Self-Amplified Spontaneous Emission (SASE), SASE with a monochromator, and self-seeding reg… ▽ More Hanbury Brown and Twiss interferometry experiment based on second-order correlations was performed at PAL-XFEL facility. The statistical properties of the X-ray radiation were studied within this experiment. Measurements were performed at NCI beamline at 10 keV photon energy in various operation conditions: Self-Amplified Spontaneous Emission (SASE), SASE with a monochromator, and self-seeding regimes at 120 pC, 180 pC, and 200 pC electron bunch charge, respectively. Statistical analysis showed short average pulse duration from 6 fs to 9 fs depending on operation conditions. A high spatial degree of coherence of about 70-80% was determined in spatial domain for the SASE beams with the monochromator and self-seeding regime of operation. The obtained values describe the statistical properties of the beams generated at PAL-XFEL facility. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: 30 pages, 10 figures, 2 tables

Factors that control stability, variability, and reliability issues of endurance cycle in ReRAM devices: a phase field study

Authors: Arijit Roy, Min-Gyu Cho, Pil-Ryung Cha

Abstract: The morphological evolution of the conducting filament (CF) predominantly controls the electric response of the resistive random access memory (ReRAM) devices. However, the parameters -- in terms of the material and the processing -- which control the growth of such CF are plenty. Extending the phase field technique for ReRAM systems presented by Roy and Cha [J. Appl. Phys. 128, 205102 (2020)], we… ▽ More The morphological evolution of the conducting filament (CF) predominantly controls the electric response of the resistive random access memory (ReRAM) devices. However, the parameters -- in terms of the material and the processing -- which control the growth of such CF are plenty. Extending the phase field technique for ReRAM systems presented by Roy and Cha [J. Appl. Phys. 128, 205102 (2020)], we could successfully model the complete SET (low resistance state) and RESET (high resistance state) sates due to the application of swee** voltage. The key parameters that influence the stability of the multi-cycle \emph{I-V} response or the endurance behavior are identified. The computational findings of the presented model ReRAM system are practical in correlating the multi-parametric influence with the stability, variability, and reliability of the endurance cycle that affect the device performance and also lead to the device failure. We believe that our computational approach of connecting the morphological changes of the CF with the electrical response, has the potential to further understand and optimize the performance of the ReRAM devices. △ Less

Submitted 7 February, 2022; v1 submitted 28 January, 2022; originally announced January 2022.

Quantitative Complementarity of Wave-Particle Duality

Authors: Tai Hyun Yoon, Minhaeng Cho

Abstract: To test the principle of complementarity and wave-particle duality quantitatively, we need a quantum composite system that can be controlled by experimental parameters. Here, we demonstrate that a double-path interferometer consisting of two parametric downconversion crystals seeded by coherent idler fields, where the generated coherent signal photons are used for quantum interference and the conj… ▽ More To test the principle of complementarity and wave-particle duality quantitatively, we need a quantum composite system that can be controlled by experimental parameters. Here, we demonstrate that a double-path interferometer consisting of two parametric downconversion crystals seeded by coherent idler fields, where the generated coherent signal photons are used for quantum interference and the conjugate idler fields are used for which-path detectors with controllable fidelity, is useful for elucidating the quantitative complementarity. We show that the source purity $μ_s$ is tightly bounded by the entanglement measure $E$ by the relation $μ_s=\sqrt{1-E^2 }$ and the visibility $V$ and detector fidelity $F$ determine the coherence of the quantons, i.e., $C = V|F|$. The quantitative complementarity of the double-path interferometer we developed recently is explained in terms of the quanton-detector entanglement or quanton source purity that are expressed as functions of injected seed photon numbers. We further suggest that the experimental scheme utilizing two stimulated parametric downconversion processes is an ideal tool for investigating and understanding wave-particle duality and complementarity quantitatively. △ Less

Submitted 16 April, 2021; v1 submitted 9 April, 2021; originally announced April 2021.

Comments: 14 pages, 5 figures

Exploring Avenues Beyond Revised DSD Functionals: I. range separation, with xDSD as a special case

Authors: Golokesh Santra, Minsik Cho, Jan M. L. Martin

Abstract: We have explored the use of range separation as a possible avenue for further improvement on our revDSD minimally empirical double hybrid functionals. Such $ω$DSD functionals encompass the XYG3 type of double hybrid (i.e., xDSD) as a special case for $ω$->0. As in our previous studies, the large and chemically diverse GMTKN55 benchmark suite was used for evaluation. Especially when using the D4 ra… ▽ More We have explored the use of range separation as a possible avenue for further improvement on our revDSD minimally empirical double hybrid functionals. Such $ω$DSD functionals encompass the XYG3 type of double hybrid (i.e., xDSD) as a special case for $ω$->0. As in our previous studies, the large and chemically diverse GMTKN55 benchmark suite was used for evaluation. Especially when using the D4 rather than D3BJ dispersion model, xDSD has a slight performance advantage in WTMAD2. As found previously, PBEP86 is the winning combination for the semilocal parts. xDSDn-PBEP86-D4 marginally outperforms the previous 'best in class' $ω$B97M(2) Berkeley double hybrid, but without range separation and using fewer than half the number of empirical parameters. Range separation turns out to offer only marginal further improvements on GMTKN55 itself. While $ω$B97M(2) still yields better performance for small-molecule thermochemistry, this is outweighed in WTMAD2 by superior performance of the new functionals for conformer equilibria. Results for two external test sets with pronounced static correlation effects may indicate that range-separated double hybrids are more resilient to such effects. △ Less

Submitted 22 May, 2021; v1 submitted 9 February, 2021; originally announced February 2021.

Comments: J. Phys. Chem. A 125, ASAP (2021) Creative Commons License (1st of two papers back-to-back)

Journal ref: J. Phys. Chem. A 125, 4614-4627 (2021)

Two-dimensional electronic spectroscopy of bacteriochlorophyll a with synchronized dual mode-locked lasers

Authors: JunWoo Kim, Jonggu Jeon, Tai Hyun Yoon, Minhaeng Cho

Abstract: How atoms and electrons in a molecule move during a chemical reaction and how rapidly energy is transferred to or from the surroundings can be studied with flashes of laser light. However, despite prolonged efforts to develop various coherent spectroscopic techniques, the lack of an all-encompassing method capable of both femtosecond time resolution and nanosecond relaxation measurement has hamper… ▽ More How atoms and electrons in a molecule move during a chemical reaction and how rapidly energy is transferred to or from the surroundings can be studied with flashes of laser light. However, despite prolonged efforts to develop various coherent spectroscopic techniques, the lack of an all-encompassing method capable of both femtosecond time resolution and nanosecond relaxation measurement has hampered various applications of studying correlated electron dynamics and vibrational coherences in functional materials and biological systems. Here, we demonstrate that two broadband (>300 nm) synchronized mode-locked lasers enable two-dimensional electronic spectroscopy (2DES) study of chromophores such as bacteriochlorophyll a in condensed phases to measure both high-resolution coherent vibrational spectrum and nanosecond electronic relaxation. We thus anticipate that the dual mode-locked laser-based 2DES developed and demonstrated here would be of use for unveiling the correlation between the quantum coherence and exciton dynamics in light-harvesting protein complexes and semiconducting materials. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Comments: 57 pages, 16 figures

Optical Sha** of Plasma Cavity for Controlled Laser Wakefield Acceleration

Authors: Bobbili Sanyasi Rao, Myung Hoon Cho, Hyung Taek Kim, Jung Hun Shin, Kyung Hwan Oh, Jong Ho Jeon, Byung Ju Yoo, Seong Ha Cho, Seong Ku Lee, Chang Hee Nam

Abstract: Laser wakefield accelerators rely on relativistically moving micron-sized plasma cavities that provide extremely high electric field >100GV/m. Here, we demonstrate transverse sha** of the plasma cavity to produce controlled sub-GeV electron beams, adopting laser pulses with an axially rotatable ellipse-shaped focal spot. We showed the control capability on electron self-injection, charge, and tr… ▽ More Laser wakefield accelerators rely on relativistically moving micron-sized plasma cavities that provide extremely high electric field >100GV/m. Here, we demonstrate transverse sha** of the plasma cavity to produce controlled sub-GeV electron beams, adopting laser pulses with an axially rotatable ellipse-shaped focal spot. We showed the control capability on electron self-injection, charge, and transverse profile of the electron beam by rotating the focal spot. We observed that the effect of the elliptical focal spot was imprinted in the profiles of the electron beams and the electron energy increased, as compared to the case of a circular focal spot. We performed 3D particle-in-cell (PIC) simulations which reproduced the experimental results and revealed dynamics of a new asymmetric self-injection process. This simple scheme offers a novel control method on laser wakefield acceleration to produce tailored electron beams and x-rays for various applications. △ Less

Submitted 21 September, 2020; v1 submitted 2 July, 2020; originally announced July 2020.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Research 2, 043319 (2020)

Broadband infrared spectroscopy of condensed phases with two intra-pulse difference-frequency-generation frequency combs

Authors: Noh Soo Han, JunWoo Kim, Tai Hyun Yoon, Minhaeng Cho

Abstract: Mid-infrared (mid-IR) spectroscopy provides a way to study structures and dynamics of complicated molecules in condensed phases. Therefore, develo** compact and broadband mid-IR spectrometer has been a long-standing challenge. Here, we show that a highly coherent and broadband mid-IR frequency comb can be generated by using an intra-pulse difference-frequency-generation with a train of pulses fr… ▽ More Mid-infrared (mid-IR) spectroscopy provides a way to study structures and dynamics of complicated molecules in condensed phases. Therefore, develo** compact and broadband mid-IR spectrometer has been a long-standing challenge. Here, we show that a highly coherent and broadband mid-IR frequency comb can be generated by using an intra-pulse difference-frequency-generation with a train of pulses from a few-cycle Ti:Sapphire oscillator. By tightly focusing the oscillator output beam into a single-pass fan-out-type periodically-poled lithium niobate crystal and tilting the orientation of the crystal with respect to incident beam, it is shown that mid-IR frequency comb with more than an octave spectral bandwidth from 1550 cm-1 (46 THz) to 3650 cm-1 (110 THz) and vanishing carrier-envelop offset phase can be generated. Then, using two coherent mid-IR frequency combs, we demonstrate that ultrabroad mid-IR dual frequency comb spectroscopy of both aromatic compounds and amino acids in solutions is experimentally feasible. We thus anticipate that our mid-IR frequency combs could be used to further develop ultrafast and broadband IR spectroscopy of chemically reactive and biological molecules in condensed phases. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: 31 pages, 9 figures are included in the PDF file

Wall-modeled large-eddy simulation of non-equilibrium turbulent boundary layers

Authors: Minjeong Cho, George I. Park, Adrián Lozano-Durán, Parviz Moin

Abstract: We conducted WMLES to examine the performance of a simple and widely used ODE-based equilibrium wall model in a spatially-develo** 3D TBL inside a bent square duct (Schwarz and Bradshaw 1994) and 3D separated flows behind a skewed bump (Ching et al. 2018a,b; Ching and Eaton 2019). From the square duct simulation, the mean velocity profiles and crossflow angles in the outer region were predicted… ▽ More We conducted WMLES to examine the performance of a simple and widely used ODE-based equilibrium wall model in a spatially-develo** 3D TBL inside a bent square duct (Schwarz and Bradshaw 1994) and 3D separated flows behind a skewed bump (Ching et al. 2018a,b; Ching and Eaton 2019). From the square duct simulation, the mean velocity profiles and crossflow angles in the outer region were predicted with high accuracy for all the considered mesh resolutions. Some disagreement was observed in the crossflow angles in the bend region where the non-equilibrium effect is most significant. Also, the simulation for the wall-mounted skewed bump showed that this simple ODE-based equilibrium wall model along with an adequate grid resolution around the 3D separation point resulted in reasonable predictions of 3D separating and reattaching flows, including mean velocity distributions, separation bubbles, and vortex structures in the bump wake. △ Less

Submitted 3 January, 2020; originally announced January 2020.

Journal ref: Annual Research Briefs 2019, Center for Turbulence Research, Stanford University

Exclusion Limits on Hidden-Photon Dark Matter near 2 neV from a Fixed-Frequency Superconducting Lumped-Element Resonator

Authors: A. Phipps, S. E. Kuenstner, S. Chaudhuri, C. S. Dawson, B. A. Young, C. T. FitzGerald, H. Froland, K. Wells, D. Li, H. M. Cho, S. Rajendran, P. W. Graham, K. D. Irwin

Abstract: We present the design and performance of a simple fixed-frequency superconducting lumped-element resonator developed for axion and hidden photon dark matter detection. A rectangular NbTi inductor was coupled to a Nb-coated sapphire capacitor and immersed in liquid helium within a superconducting shield. The resonator was transformer-coupled to a DC SQUID for readout. We measured a quality factor o… ▽ More We present the design and performance of a simple fixed-frequency superconducting lumped-element resonator developed for axion and hidden photon dark matter detection. A rectangular NbTi inductor was coupled to a Nb-coated sapphire capacitor and immersed in liquid helium within a superconducting shield. The resonator was transformer-coupled to a DC SQUID for readout. We measured a quality factor of $\sim$40,000 at the resonant frequency of 492.027 kHz and set a simple exclusion limit on $\sim$2 neV hidden photons with kinetic mixing angle $\varepsilon\gtrsim1.5\times10^{-9}$ based on 5.14 hours of integrated noise. This test device informs the development of the Dark Matter Radio, a tunable superconducting lumped-element resonator which will search for axions and hidden photons over the 100 Hz to 300 MHz frequency range. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Comments: To appear in Proceedings of the 3rd International Workshop on Microwave Cavities and Detectors for Axion Research

Theory of three-pulse photon echo spectroscopy with dual frequency combs

Authors: Jonggu Jeon, JunWoo Kim, Tai Hyun Yoon, Minhaeng Cho

Abstract: A theoretical analysis is carried out for the recently developed three-pulse photon echo spectroscopy employing dual frequency combs (DFC) as the light sources. In this method, the molecular sample interacts with three pulse trains derived from the DFC and the generated third-order signal is displayed as a two-dimensional (2D) spectrum that depends on the waiting time introduced by employing async… ▽ More A theoretical analysis is carried out for the recently developed three-pulse photon echo spectroscopy employing dual frequency combs (DFC) as the light sources. In this method, the molecular sample interacts with three pulse trains derived from the DFC and the generated third-order signal is displayed as a two-dimensional (2D) spectrum that depends on the waiting time introduced by employing asynchronous optical sampling method. Through the analysis of the heterodyne-detected signal interferogram using a local oscillator derived from one of the optical frequency combs, we show that the 2D spectrum closely matches the spectrum expected from a conventional approach with four pulses derived from a single femtosecond laser pulse and the waiting time between the second and third field-matter interactions is given by the down-converted detection time of the interferogram. The theoretical result is applied to a two-level model system with solvation effect described by solvatochromic spectral density. The model 2D spectrum reproduces spectral features such as the loss of frequency correlation, dephasing, and spectral shift as a function of the population time. We anticipate that the present theory will be the general framework for quantitative descriptions of DFC-based nonlinear optical spectroscopy. △ Less

Submitted 28 May, 2019; originally announced May 2019.

Comments: 20 pages, 2 figures are included in the PDF file

Electron energy increase in a laser wakefield accelerator using longitudinally shaped plasma density profiles

Authors: Constantin Aniculaesei, Vishwa Bandhu Pathak, Hyung Taek Kim, Kyung Hwan Oh, Byung Ju Yoo, Enrico Brunetti, Yong Ha Jang, Calin Ioan Hojbota, Junghun Shin, Jeong Ho Jeon, Seongha Cho, Myung Hoon Cho, Jae Hee Sung, Seong Ku Lee, Björn Manuel Hegelich, Chang Hee Nam

Abstract: The phase velocity of the wakefield of a laser wakefield accelerator can, theoretically, be manipulated by sha** the longitudinal plasma density profile, thus controlling the parameters of the generated electron beam. We present an experimental method where using a series of shaped longitudinal plasma density profiles we increased the mean electron peak energy by more than 50%, from 174.8 +/- 1.… ▽ More The phase velocity of the wakefield of a laser wakefield accelerator can, theoretically, be manipulated by sha** the longitudinal plasma density profile, thus controlling the parameters of the generated electron beam. We present an experimental method where using a series of shaped longitudinal plasma density profiles we increased the mean electron peak energy by more than 50%, from 174.8 +/- 1.3 MeV to 262 +/- 9.7 MeV and the maximum peak energy from 182.1 MeV to 363.1 MeV. The divergence follows closely the change of mean energy and decreases from 58.95 +/- 0.45 mrad to 12.63 +/- 1.17 mrad along the horizontal axis and from 35.23 +/- 0.27 mrad to 8.26 +/- 0.69 mrad along the vertical axis. Particle-in-cell simulations show that a ramp in a plasma density profile can affect the evolution of the wakefield, thus qualitatively confirming the experimental results. The presented method can increase the electron energy for a fixed laser power and at the same time offer an energy tunable source of electrons. △ Less

Submitted 8 September, 2018; originally announced September 2018.

Spectrally-accurate numerical method for acoustic scattering from doubly-periodic 3D multilayered media

Authors: Min Hyung Cho

Abstract: A periodizing scheme and the method of fundamental solutions are used to solve acoustic wave scattering from doubly-periodic three-dimensional multilayered media. A scattered wave in a unit cell is represented by the sum of the near and distant contribution. The near contribution uses the free-space Green's function and its eight immediate neighbors. The contribution from the distant sources is ex… ▽ More A periodizing scheme and the method of fundamental solutions are used to solve acoustic wave scattering from doubly-periodic three-dimensional multilayered media. A scattered wave in a unit cell is represented by the sum of the near and distant contribution. The near contribution uses the free-space Green's function and its eight immediate neighbors. The contribution from the distant sources is expressed using proxy source points over a sphere surrounding the unit cell and its neighbors. The Rayleigh-Bloch radiation condition is applied to the top and bottom layers. Extra unknowns produced by the periodizing scheme in the linear system are eliminated using a Schur complement. The proposed numerical method avoids using singular quadratures and the quasi-periodic Green's function or complicated lattice sum techniques. Therefore, the proposed scheme is robust at all scattering parameters including Wood anomalies. The algorithm is also applicable to electromagnetic problems by using the dyadic Green's function. Numerical examples with 10-digit accuracy are provided. Finally, reflection and transmission spectra are computed over a wide range of incident angles for device characterization. △ Less

Submitted 26 March, 2019; v1 submitted 11 June, 2018; originally announced June 2018.

MSC Class: 65Z05; 65R20

Ab Initio Finite Temperature Auxiliary Field Quantum Monte Carlo

Authors: Yuan Liu, Minsik Cho, Brenda Rubenstein

Abstract: We present an \textit{ab initio} auxiliary field quantum Monte Carlo method for studying the electronic structure of molecules, solids, and model Hamiltonians at finite temperature. The algorithm marries the \textit{ab initio} phaseless auxiliary field quantum Monte Carlo algorithm known to produce high accuracy ground state energies of molecules and solids with its finite temperature variant, lon… ▽ More We present an \textit{ab initio} auxiliary field quantum Monte Carlo method for studying the electronic structure of molecules, solids, and model Hamiltonians at finite temperature. The algorithm marries the \textit{ab initio} phaseless auxiliary field quantum Monte Carlo algorithm known to produce high accuracy ground state energies of molecules and solids with its finite temperature variant, long used by condensed matter physicists for studying model Hamiltonian phase diagrams, to yield a phaseless, \textit{ab initio} finite temperature method. We demonstrate that the method produces internal energies within chemical accuracy of exact diagonalization results across a wide range of temperatures for H$_{2}$O (STO-3G), C$_{2}$ (STO-6G), the one-dimensional hydrogen chain (STO-6G), and the multi-orbital Hubbard model. Our method effectively controls the phase problem through importance sampling, \textit{often even without invoking the phaseless approximation}, down to temperatures at which the systems studied approach their ground states and may therefore be viewed as exact over wide temperature ranges. This technique embodies a versatile tool for studying the finite temperature phase diagrams of a plethora of systems whose properties cannot be captured by a Hubbard U term alone. Our results moreover illustrate that the severity of the phase problem for model Hamiltonians far exceeds that for many molecules at all of the temperatures studied. △ Less

Submitted 14 August, 2018; v1 submitted 7 June, 2018; originally announced June 2018.

Journal ref: J. Chem. Theory Comput. 2018, 14, 9, 4722-4732

Highly efficient laser-driven Compton gamma-ray source

Authors: Taiwu Huang, Chul Min Kim, Cangtao Zhou, Myung Hoon Cho, Kazuhisa Nakajima, Chang Mo Ryu, Shuangchen Ruan, Chang Hee Nam

Abstract: The recent advancement of high-intensity lasers has made all-optical Compton scattering become a promising way to produce ultra-short brilliant $γ$-rays in an ultra-compact system. However, so far achieved Compton $γ$-ray sources are severely limited by low conversion efficiency (lower than $10^{-5}$) and spectral intensity ($\sim10^{4}$ ${\rm photons/0.1\%BW}$). Here we present a highly efficient… ▽ More The recent advancement of high-intensity lasers has made all-optical Compton scattering become a promising way to produce ultra-short brilliant $γ$-rays in an ultra-compact system. However, so far achieved Compton $γ$-ray sources are severely limited by low conversion efficiency (lower than $10^{-5}$) and spectral intensity ($\sim10^{4}$ ${\rm photons/0.1\%BW}$). Here we present a highly efficient gamma photon emitter obtained by irradiating a high-intensity laser pulse on a miniature plasma device consisting of a plasma lens and a plasma mirror. This concept exploits strong spatiotemporal laser-sha** process and high-charge electron acceleration process in the plasma lens, as well as an efficient nonlinear Compton scattering process enabled by the plasma mirror. Our particle-in-cell simulations demonstrate that in this novel scheme, brilliant $γ$-rays with very high conversion efficiency (higher than $10^{-2}$) and spectral intensity ($\sim10^{9}$ ${\rm photons/0.1\%BW}$) can be achieved by employing currently available petawatt-class lasers with intensity of $10^{21}$ ${\rm W/cm^2}$. Such efficient and intense $γ$-ray sources would find applications in wide-ranging areas. △ Less

Submitted 8 July, 2018; v1 submitted 22 March, 2018; originally announced March 2018.

Comments: 19 pages, 8 figures

Fast dose optimization for rotating shield brachytherapy

Authors: Myung Cho, Xiaodong Wu, Hossein Dakhah, Jirong Yi, Ryan T. Flynn, Yusung Kim, Weiyu Xu

Abstract: Purpose: To provide a fast computational method, based on the proximal graph solver (POGS) - a convex optimization solver using the alternating direction method of multipliers (ADMM), for calculating an optimal treatment plan in rotating shield brachytherapy (RSBT). RSBT treatment planning has more degrees of freedom than conventional high-dose-rate brachytherapy (HDR-BT) due to the addition of em… ▽ More Purpose: To provide a fast computational method, based on the proximal graph solver (POGS) - a convex optimization solver using the alternating direction method of multipliers (ADMM), for calculating an optimal treatment plan in rotating shield brachytherapy (RSBT). RSBT treatment planning has more degrees of freedom than conventional high-dose-rate brachytherapy (HDR-BT) due to the addition of emission direction, and this necessitates a fast optimization technique to enable clinical usage. // Methods: The multi-helix RSBT (H-RSBT) delivery technique was considered with five representative cervical cancer patients. Treatment plans were generated for all patients using the POGS method and the previously considered commercial solver IBM CPLEX. The rectum, bladder, sigmoid, high-risk clinical target volume (HR-CTV), and HR-CTV boundary were the structures considered in our optimization problem, called the asymmetric dose-volume optimization with smoothness control. Dose calculation resolution was 1x1x3 mm^3 for all cases. The H-RSBT applicator has 6 helices, with 33.3 mm of translation along the applicator per helical rotation and 1.7 mm spacing between dwell positions, yielding 17.5 degree emission angle spacing per 5 mm along the applicator.// Results: For each patient, HR-CTV D90, HR-CTV D100, rectum D2cc, sigmoid D2cc, and bladder D2cc matched within 1% for CPLEX and POGS. Also, we obtained similar EQD2 figures between CPLEX and POGS. POGS was around 18 times faster than CPLEX. Over all patients, total optimization times were 32.1-65.4 seconds for CPLEX and 2.1-3.9 seconds for POGS. // Conclusions: POGS substantially reduced treatment plan optimization time around 18 times for RSBT with similar HR-CTV D90, OAR D2cc values, and EQD2 figure relative to CPLEX, which is significant progress toward clinical translation of RSBT. POGS is also applicable to conventional HDR-BT. △ Less

Submitted 19 April, 2017; originally announced April 2017.

Comments: 9 pages, 3 figures

Efficient and accurate computation of electric field dyadic Green's function in layered media

Authors: Min Hyung Cho, Wei Cai

Abstract: Concise and explicit formulas for dyadic Green's functions, representing the electric and magnetic fields due to a dipole source placed in layered media, are derived in this paper. First, the electric and magnetic fields in the spectral domain for the half space are expressed using Fresnel reflection and transmission coefficients. Each component of electric field in the spectral domain constitutes… ▽ More Concise and explicit formulas for dyadic Green's functions, representing the electric and magnetic fields due to a dipole source placed in layered media, are derived in this paper. First, the electric and magnetic fields in the spectral domain for the half space are expressed using Fresnel reflection and transmission coefficients. Each component of electric field in the spectral domain constitutes the spectral Green's function in layered media. The Green's function in the spatial domain is then recovered involving Sommerfeld integrals for each component in the spectral domain. By using Bessel identities, the number of Sommerfeld integrals are reduced, resulting in much simpler and more efficient formulas for numerical implementation compared with previous results. This approach is extended to the three-layer Green's function. In addition, the singular part of the Green's function is naturally separated out so that integral equation methods developed for free space Green's functions can be used with minimal modification. Numerical results are included to show efficiency and accuracy of the derived formulas. △ Less

Submitted 14 October, 2016; originally announced October 2016.

Stability Analysis of C-band 500-kW Klystron with Multi-cell Output cavity

Authors: Jihyun Hwang, Sung-Ju Park, Won Namkung, Moohyun Cho

Abstract: A progogype 5-GHz 500-kW CW klystron (model E3762 provided by Toshiba Electron Tubes & Devices Co. Ltd.) has been operating as the RF source for the lower hybrid current drive (LHCD) system in the KSTAR tokamak. In order to investigate how the efficiency of the 5-GHz 500-kW CW klystron prototype could be enhanced, the cavity design study is being carried out with simulation code based on the main… ▽ More A progogype 5-GHz 500-kW CW klystron (model E3762 provided by Toshiba Electron Tubes & Devices Co. Ltd.) has been operating as the RF source for the lower hybrid current drive (LHCD) system in the KSTAR tokamak. In order to investigate how the efficiency of the 5-GHz 500-kW CW klystron prototype could be enhanced, the cavity design study is being carried out with simulation code based on the main klystron operation parameters. This is being done by simulating klystron performances for various cavity parameters including the number of cavities, inter-cavity distance, and cavity tuning frequencies. The simulation has been done with the FCI (field charge interaction) code aided by a matlab script for scanning input parameters. Initial set of scan parameters was obtained by benchmarking the E3762 klystron. It was possible to obtain optimized design parameters with better efficiency for a cavity system adopting a multi-cell output cavity. However, the multi-cell output cavity is prone to produce a self-oscillation due to the prolonged (several half RF periods) beam-field interaction along its multiple gaps. We have checked the feasibility of the optimization by evaluating the stability of output cavity system. The stability is given by the ratio of a beam-loading conductance to the circuit conductance. △ Less

Submitted 13 June, 2016; originally announced June 2016.

Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914

Authors: The LIGO Scientific Collaboration, B. P. Abbott, R. Abbott, T. D. Abbott, M. R. Abernathy, K. Ackley, C. Adams, P. Addesso, R. X. Adhikari, V. B. Adya, C. Affeldt, N. Aggarwal, O. D. Aguiar, A. Ain, P. Ajith, B. Allen, P. A. Altin, D. V. Amariutei, S. B. Anderson, W. G. Anderson, K. Arai, M. C. Araya, C. C. Arceneaux, J. S. Areeda, K. G. Arun , et al. (702 additional authors not shown)

Abstract: In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec… ▽ More In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz. △ Less

Submitted 28 February, 2017; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. D 95, 062003 (2017)

A Study of Al-Mn Transition Edge Sensor Engineering for Stability

Authors: E. M. George, J. E. Austermann, J. A. Beall, D. Becker, B. A. Benson, L. E. Bleem, J. E. Carlstrom, C. L. Chang, H- M. Cho, A. T. Crites, M. A. Dobbs, W. Everett, N. W. Halverson, J. W. Henning, G. C. Hilton, W. L. Holzapfel, J. Hubmayr, K. D. Irwin, D. Li, M. Lueker, J. J. McMahon, J. Mehl, J. Montgomery, T. Natoli, J. P. Nibarger , et al. (10 additional authors not shown)

Abstract: The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We… ▽ More The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We conclude that parameters affecting device stability can be engineered for optimal device operation, and present the model parameters extracted for the different TES designs. △ Less

Submitted 10 November, 2013; originally announced November 2013.

Comments: 8 pages, 2 figures, 1 table. Proceedings of Low Temperature Detectors 15 (LTD-15). To be published in Journal of Low Temperature Physics (JLTP, SI:LTD15)

Journal ref: Journal of Low Temperature Physics: Volume 176, Issue 3 (2014), Page 383-391

Non-Abelian Vortices in Condensed Matter Physics

Authors: Y. M. Cho, Hyojoong Khim, Namsik Yong

Abstract: We study the non-Abelian topological vortices in condensed matter physics, whose topological flux quantum number is described by $π_2(S^2)$, not by $π_1(S^1)$. We present two examples, a magnetic vortex in two-gap superconductor and a vorticity vortex in two-component Bose-Einstein condensate. In both cases the condensates exhibit a global SU(2) symmetry which allows the non-Abelian topology. We… ▽ More We study the non-Abelian topological vortices in condensed matter physics, whose topological flux quantum number is described by $π_2(S^2)$, not by $π_1(S^1)$. We present two examples, a magnetic vortex in two-gap superconductor and a vorticity vortex in two-component Bose-Einstein condensate. In both cases the condensates exhibit a global SU(2) symmetry which allows the non-Abelian topology. We establish the non-Abelian flux quantization in two-gap superconductor by demonstrating the existence of non-Abelian magnetic vortex whose flux is quantized in the unit $4π/g$, not $2π/g$. We also discuss a genuine non-Abelian gauge theory of superconductivity which has a local SU(2) gauge symmetry, and establish the non-Abelian Meissner effect in the non-Abelian superconductor. We compare the non-Abelian vortices with the well-known Abelian Abrikosov vortex, and discuss how these non-Abelian vortices could be observed experimentally in two-gap superconductor made of ${\rm MgB_2}$ and spin-1/2 condensate of $^{87}{\rm Rb}$ atoms. Finally, we argue that the existence of the non-Abelian vortices provides a strong evidence for the existence of topological knots in these condensed matters whose topology is fixed by $π_3(S^2)$, which one can construct by twisting and connecting the periodic ends of the non-Abelian vortices. △ Less

Submitted 24 October, 2005; v1 submitted 11 August, 2003; originally announced August 2003.

Comments: 17 pages, 5 figures

Understanding visual map formation through vortex dynamics of spin Hamiltonian models

Authors: Myoung Won Cho, Seunghwan Kim

Abstract: The pattern formation in orientation and ocular dominance columns is one of the most investigated problems in the brain. From a known cortical structure, we build spin-like Hamiltonian models with long-range interactions of the Mexican hat type. These Hamiltonian models allow a coherent interpretation of the diverse phenomena in the visual map formation with the help of relaxation dynamics of sp… ▽ More The pattern formation in orientation and ocular dominance columns is one of the most investigated problems in the brain. From a known cortical structure, we build spin-like Hamiltonian models with long-range interactions of the Mexican hat type. These Hamiltonian models allow a coherent interpretation of the diverse phenomena in the visual map formation with the help of relaxation dynamics of spin systems. In particular, we explain various phenomena of self-organization in orientation and ocular dominance map formation including the pinwheel annihilation and its dependency on the columnar wave vector and boundary conditions. △ Less

Submitted 29 October, 2003; v1 submitted 5 June, 2003; originally announced June 2003.

Comments: 4 pages, 15 figures

Knots in Condensed Matters

Authors: Y. M. Cho

Abstract: We propose two types of topologically stable knot solitons in condensed matters, one in two-component Bose-Einstein condensates and one in two-gap superconductors. We identify the knot in Bose-Einstein condensates as a twisted vorticity flux ring and the knot in two-gap superconductors as a twisted magnetic flux ring. In both cases we show that there is a remarkable interplay between topology an… ▽ More We propose two types of topologically stable knot solitons in condensed matters, one in two-component Bose-Einstein condensates and one in two-gap superconductors. We identify the knot in Bose-Einstein condensates as a twisted vorticity flux ring and the knot in two-gap superconductors as a twisted magnetic flux ring. In both cases we show that there is a remarkable interplay between topology and dynamics which transforms the topologcal stability to the dynamical stability, and vise versa. We discuss how these knots can be constructed in the spin-1/2 condensate of $^{87}{\rm Rb}$ atoms and in two-gap superconductor of $MgB_2$. △ Less

Submitted 19 July, 2006; v1 submitted 17 December, 2001; originally announced December 2001.

Comments: 9 pages, 4 figures

Journal ref: Int.J.Pure Appl.Phys. 1 (2005) 246

Development of a Smart Modulator and Efficiency Evaluation of 500-GeV e+e- C-Band Linear Collider

Authors: J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung, K. H. Chung, T. Shintake, H. Matsumoto

Abstract: An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders… ▽ More An e+e- linear collider at 500-GeV C.M. (center of mass) has been proposed as a future accelerator. The C-band linear collider has more than a thousand klystrons and matching modulators. The linear colliders require smart modulators with high reliability, compact and simple configuration, and good power efficiency. This study suggests solutions to problems expected in the future linear colliders. A C-band smart modulator has been developed using a constant-current inverter power supply. The smart modulator provides 350-kV pulses of the pulse-to-pulse stability of 0.35%, the pulse-width of 4.35 microseconds, and the repetition rate of 50 Hz. We also investigated the power efficiency for the C-band scheme. A pulse efficiency of 75% can be achieved by an optimized pulse transformer and the RF phase modulation. With pulsed klystrons of 60% power efficiency, it is possible to achieve the RF system efficiency of 32% with the wall-plug power of 170 MW. △ Less

Submitted 18 August, 2000; originally announced August 2000.

Comments: 3 pages, 4 figures, Linac2000 paper ID No. THA12 file= THA12.pdf

Journal ref: eConf C000821 (2000) THA12

RF System Upgrades to the Advanced Photon Source Linear Accelerator in Support of the Fel Operation

Authors: T. L. Smith, M. H. Cho, A. E. Grelick, G. Pile, A. Nassiri, N. Arnold

Abstract: The S-band linear accelerator, which was built to be the source of particles and the front end of the Advanced Photon Source injector, is now also being used to support a low-energy undulator test line (LEUTL) and to drive a free-electron laser (FEL). The more severe rf stability requirements of the FEL have resulted in an effort to identify sources of phase and amplitude instability and impleme… ▽ More The S-band linear accelerator, which was built to be the source of particles and the front end of the Advanced Photon Source injector, is now also being used to support a low-energy undulator test line (LEUTL) and to drive a free-electron laser (FEL). The more severe rf stability requirements of the FEL have resulted in an effort to identify sources of phase and amplitude instability and implement corresponding upgrades to the rf generation chain and the measurement system. Test data and improvements implemented and planned are described △ Less

Submitted 17 August, 2000; originally announced August 2000.

Comments: LC 2000 (3 pages, 6 figures)

Journal ref: eConf C000821 (2000) THc10

Pulsed Neutron Source using 100-MeV electron Linac at Pohang Accelerator Laboratory

Authors: G. N. Kim, H. S. Kang, Y. S. Lee, M. H. Cho, I. S. Ko, W. Namkung

Abstract: The Pohang Accelerator Laboratory operates an electron linac for the pulsed neutron source as one of the long-term nuclear R&D programs at the Korea Atomic Energy Research Institute. The designed beam parameters are as follows; The nominal beam energy is 100 MeV, the maximum beam power is 10 kW, and the beam current is varied from 300 mA to 5A depends on the pulse repetition. The linac has two o… ▽ More The Pohang Accelerator Laboratory operates an electron linac for the pulsed neutron source as one of the long-term nuclear R&D programs at the Korea Atomic Energy Research Institute. The designed beam parameters are as follows; The nominal beam energy is 100 MeV, the maximum beam power is 10 kW, and the beam current is varied from 300 mA to 5A depends on the pulse repetition. The linac has two operating modes: one for short pulse modes with the various repetitions between 2 ns and 100 ns and the other for long pulse modes with 1 ms repetition. We have constructed and tested an electron linac based on the existing equipment such as a SLAC-5045 klystron, two constant gradient accelerating sections, and a thermionic RF-gun. We present the characteristics of the linac and report the status of the pulsed neutron source facilities include a target system and time-of-flight paths. △ Less

Submitted 15 August, 2000; originally announced August 2000.

Comments: 3 pages 2 figures

Journal ref: eConfC000821:TUE06,2000

2.856-GHz Modulation of Conventional Triode Electron Gun

Authors: S. J. Park, J. S. Oh, J. S. Bak, M. H. Cho, W. Namkung

Abstract: For the generation of picosecond (< 100 ps) electron beam pulses, we studied the RF modulation of a conventional triode electron gun. The feasibility study for this scheme has been experimentally investigated by modulating a triode gun of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with 2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper, we present… ▽ More For the generation of picosecond (< 100 ps) electron beam pulses, we studied the RF modulation of a conventional triode electron gun. The feasibility study for this scheme has been experimentally investigated by modulating a triode gun of the Y-824 cathode-grid (KG) structure provided by the CPI Eimac, with 2.856-GHz pulsed RF generated by a solid-state amplifier (SSA). In this paper, we present the methods and results of this investigation. △ Less

Submitted 13 August, 2000; v1 submitted 11 August, 2000; originally announced August 2000.

Comments: 3 pages including 7 figures; To be submitted to the LINAC2000 conference, Paper No. MOB18; Minor changes in grammer

Journal ref: eConf C000821 (2000) MOB18