-
Stability and dynamics of the laminar flow past rectangular prisms
Authors:
Alessandro Chiarini,
Edouard Boujo
Abstract:
The laminar flow past rectangular prisms is studied in the space of length-to-height ratio ($1 \le L/H \le 5$), width-to-height ratio ($1.2 \le W/H \le 5$) and Reynolds number ($Re \lessapprox 700$). The primary bifurcation is investigated with linear stability analysis. For large $W/L$ it consists of an oscillating mode breaking the top/bottom planar symmetry. For smaller $W/L$ the flow becomes f…
▽ More
The laminar flow past rectangular prisms is studied in the space of length-to-height ratio ($1 \le L/H \le 5$), width-to-height ratio ($1.2 \le W/H \le 5$) and Reynolds number ($Re \lessapprox 700$). The primary bifurcation is investigated with linear stability analysis. For large $W/L$ it consists of an oscillating mode breaking the top/bottom planar symmetry. For smaller $W/L$ the flow becomes first unstable to stationary perturbations, and the wake experiences a static deflection, vertical for intermediate $W/L$ and horizontal for small $W/L$. Weakly nonlinear analysis and nonlinear direct numerical simulations are used for $L/H = 5$ and larger $Re$. For $W/H = 1.2$ and $2.25$, after the primary bifurcation the flow recovers the top/bottom planar symmetry but loses the left/right one, via supercritical and subcritical pitchfork bifurcations, respectively. Further increasing $Re$, the flow becomes unsteady and oscillates around either the deflected (small $W/H$) or the non-deflected (intermediate $W/H$) wake. For intermediate $W/H$ and $R$e, a periodic and fully symmetric regime is detected, with hairpin vortices shed from the top and bottom leading-edge (LE) shear layers; its triggering mechanism is discussed. At large $Re$ and for all $W/H$, the flow approaches a chaotic state characterised by the superposition of different modes: shedding of hairpin vortices from the LE shear layers, and wake flap** in the horizontal and vertical directions. In some portions of the parameter space the different modes synchronise, giving rise to periodic regimes also at relatively large $Re$.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Finite-size inertial spherical particles in turbulence
Authors:
Alessandro Chiarini,
Marco Edoardo Rosti
Abstract:
We investigate by direct numerical simulations the fluid-solid interaction of non-dilute suspensions of spherical particles moving in triperiodic turbulence, at the relatively large Reynolds number of $Re_λ\approx 400$. The solid-to-fluid density ratio is varied between $1.3$ and $100$, the particle diameter $D$ ranges between $16 \le D/η\le 123$ ($η$ is the Kolmogorov scale), and the volume fract…
▽ More
We investigate by direct numerical simulations the fluid-solid interaction of non-dilute suspensions of spherical particles moving in triperiodic turbulence, at the relatively large Reynolds number of $Re_λ\approx 400$. The solid-to-fluid density ratio is varied between $1.3$ and $100$, the particle diameter $D$ ranges between $16 \le D/η\le 123$ ($η$ is the Kolmogorov scale), and the volume fraction of the suspension is $0.079$. Turbulence is sustained using the Arnold-Beltrami-Childress cellular-flow forcing. The influence of the solid phase on the largest and energetic scales of the flow changes with the size and density of the particles. Light and large particles modulate all scales in a isotropic way, while heavier and smaller particles modulate the largest scales of the flow towards an anisotropic state. Smaller scales are isotropic and homogeneous for all cases. The mechanism driving the energy transfer across scales changes with the size and the density of the particles. For large and light particles the energy transfer is only marginally influenced by the fluid-solid interaction. For small and heavy particles, instead, the classical energy cascade is subdominant at all scales, and the energy transfer is essentially driven by the fluid-solid coupling. The influence of the solid phase on the flow intermittency is also discussed. Besides, the collective motion of the particles and their preferential location in relation with properties of the carrier flow are analysed. The solid phase exhibits moderate clustering; for large particles the level of clustering decreases with their density, while for small particles it is maximum for intermediate values.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
The XENONnT Dark Matter Experiment
Authors:
XENON Collaboration,
E. Aprile,
J. Aalbers,
K. Abe,
S. Ahmed Maouloud,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
V. C. Antochi,
D. Antón Martin,
F. Arneodo,
M. Balata,
L. Baudis,
A. L. Baxter,
M. Bazyk,
L. Bellagamba,
R. Biondi,
A. Bismark,
E. J. Brookes,
A. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
T. K. Bui
, et al. (170 additional authors not shown)
Abstract:
The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in…
▽ More
The multi-staged XENON program at INFN Laboratori Nazionali del Gran Sasso aims to detect dark matter with two-phase liquid xenon time projection chambers of increasing size and sensitivity. The XENONnT experiment is the latest detector in the program, planned to be an upgrade of its predecessor XENON1T. It features an active target of 5.9 tonnes of cryogenic liquid xenon (8.5 tonnes total mass in cryostat). The experiment is expected to extend the sensitivity to WIMP dark matter by more than an order of magnitude compared to XENON1T, thanks to the larger active mass and the significantly reduced background, improved by novel systems such as a radon removal plant and a neutron veto. This article describes the XENONnT experiment and its sub-systems in detail and reports on the detector performance during the first science run.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Anisotropic mean flow enhancement and anomalous transport of finite-size spherical particles in turbulent flows
Authors:
Alessandro Chiarini,
Ianto Cannon,
Marco Edoardo Rosti
Abstract:
We investigate the influence of dispersed solid spherical particles on the largest scales of the turbulent Arnold-Beltrami-Childress (ABC) flow. The ABC flow is an ideal instance of a complex flow: it does not have solid boundaries, but possesses an inhomogeneous and three-dimensional mean shear. By tuning the parameters of the suspension, we show that particles deviate towards quasi-straight traj…
▽ More
We investigate the influence of dispersed solid spherical particles on the largest scales of the turbulent Arnold-Beltrami-Childress (ABC) flow. The ABC flow is an ideal instance of a complex flow: it does not have solid boundaries, but possesses an inhomogeneous and three-dimensional mean shear. By tuning the parameters of the suspension, we show that particles deviate towards quasi-straight trajectories and exhibit anomalous transport. In doing this, they enhance the mean-flow energy and modulate the largest scales of the flow towards an anisotropic and quasi two-dimensional state.
△ Less
Submitted 27 December, 2023; v1 submitted 12 October, 2023;
originally announced October 2023.
-
Curvature effects on the structure of near-wall turbulence
Authors:
Davide Selvatici,
Maurizio Quadrio,
Alessandro Chiarini
Abstract:
The interaction between near-wall turbulence and wall curvature is described for the incompressible flow in a plane channel with a small concave-convex-concave bump on the bottom wall, with height comparable to the wall-normal location of the main turbulent structures. The analysis starts from a database generated by a direct numerical simulation and hinges upon the anisotropic generalised Kolmogo…
▽ More
The interaction between near-wall turbulence and wall curvature is described for the incompressible flow in a plane channel with a small concave-convex-concave bump on the bottom wall, with height comparable to the wall-normal location of the main turbulent structures. The analysis starts from a database generated by a direct numerical simulation and hinges upon the anisotropic generalised Kolmogorov equations, i.e. the exact budget equations for the second-order structure function tensor. The influence of the bump on the wall cycle and on the energy production, redistribution and transfers is described in the physical and scale spaces. Over the upstream side of the bump, the energy drained from the mean flow to sustain the streamwise fluctuations decreases, and the streaks of high and low streamwise velocity weaken and are stretched spanwise. After the bump tip, instead, the production of streamwise fluctuations grows and the streaks intensify, progressively recovering their characteristic spanwise scale. The wall-normal fluctuations, and thus the quasi-streamwise vortices, are sustained by the mean flow over the upstream side of the bump, while energy flows from the vertical fluctuations to the mean field over the downstream side. On the concave portion of the upstream side, the near-wall fluctuations form structures of spanwise velocity which are consistent with Taylor-Görtler vortices at an early stage of development. Their evolution is described by analysing the scale-space pressure-strain term. A schematic description of the bump flow is presented, in which various regions are identified according to the signs of curvature and streamwise pressure gradient.
△ Less
Submitted 17 August, 2023;
originally announced August 2023.
-
Structure function tensor equations with triple decomposition
Authors:
Federica Gattere,
Alessandro Chiarini,
Emanuele Gallorini,
Maurizio Quadrio
Abstract:
Exact budget equations are derived for the coherent and stochastic contributions to the second-order structure function tensor. They extend the anisotropic generalised Kolmogorov equations (AGKE) by considering the coherent and stochastic parts of the Reynolds stress tensor, and are useful for the statistical description of turbulent flows with periodic or quasi-periodic features, like e.g. the al…
▽ More
Exact budget equations are derived for the coherent and stochastic contributions to the second-order structure function tensor. They extend the anisotropic generalised Kolmogorov equations (AGKE) by considering the coherent and stochastic parts of the Reynolds stress tensor, and are useful for the statistical description of turbulent flows with periodic or quasi-periodic features, like e.g. the alternate shedding after a bluff body. While the original AGKE describe production, transport, inter-component redistribution and dissipation of the Reynolds stresses in the combined space of scales and positions, the new equations, called $\varphi$AGKE, contain the phase $\varphi$ as an additional independent variable, and describe the interplay among the mean, coherent and stochastic fields at the various phases. The newly derived $\varphi$AGKE are then applied to a case where an exactly periodic external forcing drives the flow: a turbulent plane channel flow modified by harmonic spanwise oscillations of the wall to reduce drag. The phase-by-phase action of the oscillating transversal Stokes layer generated by the forcing on the near-wall turbulent structures is observed, and a detailed description of the scale-space interaction among mean, coherent and stochastic fields is provided thanks to the $\varphi$AGKE.
△ Less
Submitted 18 February, 2023;
originally announced February 2023.
-
Structure of turbulence in the flow around a rectangular cylinder
Authors:
Alessandro Chiarini,
Davide Gatti,
Andrea Cimarelli,
Maurizio Quadrio
Abstract:
The separating and reattaching turbulent flow past a rectangular cylinder is studied to describe how small and large scales contribute to the sustaining mechanism of the velocity fluctuations. The work is based on the Anisotropic Generalised Kolmogorov Equations (AGKE), exact budget equations for the second-order structure function tensor in the space of scales and in the physical space. Scale-spa…
▽ More
The separating and reattaching turbulent flow past a rectangular cylinder is studied to describe how small and large scales contribute to the sustaining mechanism of the velocity fluctuations. The work is based on the Anisotropic Generalised Kolmogorov Equations (AGKE), exact budget equations for the second-order structure function tensor in the space of scales and in the physical space. Scale-space energy fluxes show that forward and reverse energy transfers simultaneously occur in the flow, with interesting modelling implications.
Over the longitudinal cylinder side, the Kelvin-Helmholtz instability of the leading-edge shear layer generates large spanwise rolls, which get stretched into hairpin-like vortices and eventually break down into smaller streamwise vortices. Independent sources of velocity fluctuations act at different scales. The flow dynamics is dominated by pressure-strain: the flow im**ement on the cylinder surface in the reattachment zone produces spanwise velocity fluctuations very close to the wall and, at larger wall distances, reorients them to feed streamwise-aligned vortices.
In the near wake, large von Kàrmàn-like vortices are shed from the trailing edge and coexist with smaller turbulent structures, each with its own independent production mechanism. At the trailing edge, the sudden disappearance of the wall changes the structure of turbulence: streamwise vortices progressively vanish, while spanwise structures close to the wall are suddenly turned into vertical fluctuations by the pressure strain.
△ Less
Submitted 12 July, 2022;
originally announced July 2022.
-
Dimples for skin-friction drag reduction: status and perspectives
Authors:
Federica Gattere,
Alessandro Chiarini,
Maurizio Quadrio
Abstract:
Dimples are small concavities imprinted on a flat surface, known to affect heat transfer and also flow separation and aerodynamic drag on bluff bodies when acting as a standard roughness. Recently, dimples have been proposed as a roughness pattern that is capable to reduce the turbulent drag of a flat plate, by providing a reduction of skin friction that compensates the dimple-induced pressure dra…
▽ More
Dimples are small concavities imprinted on a flat surface, known to affect heat transfer and also flow separation and aerodynamic drag on bluff bodies when acting as a standard roughness. Recently, dimples have been proposed as a roughness pattern that is capable to reduce the turbulent drag of a flat plate, by providing a reduction of skin friction that compensates the dimple-induced pressure drag, and leads to a global benefit.
The question whether dimples do actually work to reduce friction drag is still unsettled. In this paper, we provide a comprehensive review of the available information, touching upon the many parameters that characterize the problem. A number of reasons that contribute to explaining the contrasting literature information are discussed. We also provide guidelines for future studies, by highlighting key methodological steps required for a meaningful comparison between a flat and dimpled surface in view of drag reduction.
△ Less
Submitted 10 July, 2022;
originally announced July 2022.
-
Drag reduction on a transonic airfoil
Authors:
Maurizio Quadrio,
Alessandro Chiarini,
Jacopo Banchetti,
Davide Gatti,
Antonio Memmolo,
Sergio Pirozzoli
Abstract:
Flow control for turbulent skin-friction drag reduction is applied to a transonic airfoil to improve its aerodynamic performance. The study is based on direct numerical simulations (with up to 1.8 billions cells) of the compressible turbulent flow around a supercritical airfoil, at Reynolds and Mach numbers of $Re_\infty= 3 \times 10^5$ and $M_\infty =0.7$. Control via spanwise forcing is applied…
▽ More
Flow control for turbulent skin-friction drag reduction is applied to a transonic airfoil to improve its aerodynamic performance. The study is based on direct numerical simulations (with up to 1.8 billions cells) of the compressible turbulent flow around a supercritical airfoil, at Reynolds and Mach numbers of $Re_\infty= 3 \times 10^5$ and $M_\infty =0.7$. Control via spanwise forcing is applied over a fraction of the suction side of the airfoil. Besides locally reducing friction, the control modifies the shock wave and significantly improves the aerodynamic efficiency of the airfoil by increasing lift and decreasing drag. Hence, the airfoil can achieve the required lift at a lower angle of attack and with a lower drag. Estimates at the aircraft level indicate that substantial savings are possible; when control is active, its energy cost becomes negligible thanks to the small application area. We suggest that skin-friction drag reduction should be considered not only as a goal, but also as a tool to improve the global aerodynamics of complex flows.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Ascending-descending and direct-inverse cascades of Reynolds stresses in turbulent Couette flow
Authors:
Alessandro Chiarini,
Mariadebora Mauriello,
Davide Gatti,
Maurizio Quadrio
Abstract:
The interaction between small- and large-scale structures, and the coexisting bottom-up and top-down processes are studied in a turbulent plane Couette flow, where space-filling longitudinal rolls appear at relatively low values of the Reynolds number $Re$. A DNS database at $Re_τ=101$ is built to replicate the highest $Re$ considered in a recent experimental work by Kawata and Alfredsson (Phys. R…
▽ More
The interaction between small- and large-scale structures, and the coexisting bottom-up and top-down processes are studied in a turbulent plane Couette flow, where space-filling longitudinal rolls appear at relatively low values of the Reynolds number $Re$. A DNS database at $Re_τ=101$ is built to replicate the highest $Re$ considered in a recent experimental work by Kawata and Alfredsson (Phys. Rev. Lett., vol.120, 2018, 244501). Our study is based on the exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$, i.e. the Anisotropic Generalized Kolmogorov Equations (AGKE). The AGKE study production, redistribution, transport and dissipation of every Reynolds stress tensor component, considering simultaneously the physical space and the space of scales, and properly define the concept of scale in the inhomogeneous wall-normal direction.
We show how the large-scale energy-containing motions are involved in the production and redistribution of the turbulent fluctuations. Both bottom-up and top-down interactions occur, and the same is true for direct and inverse cascading. The wall-parallel components $\langle δu δu \rangle$ and $\langle δw δw \rangle$ show that the both small and large near-wall scales feed the large scales away from the wall. The wall-normal component $\langle δv δv \rangle$ is different, and shows a dominant top-down dynamics, being produced via pressure-strain redistribution away from the wall and transferred towards near-wall larger scales via an inverse cascade. The off-diagonal component shows a top-down interaction, with both direct and inverse cascade, albeit the latter takes place within a limited range of scales.
△ Less
Submitted 23 September, 2021;
originally announced September 2021.
-
The importance of corner sharpness in the BARC test case: a numerical study
Authors:
Alessandro Chiarini,
Maurizio Quadrio
Abstract:
The BARC flow is studied via Direct Numerical Simulation at a relatively low turbulent Reynolds number, with focus on the geometrical representation of the leading-edge (LE) corners. The study contributes to further our understanding of the discrepancies between existing numerical and experimental BARC data. In a first part, rounded LE corners with small curvature radii are considered. Results sho…
▽ More
The BARC flow is studied via Direct Numerical Simulation at a relatively low turbulent Reynolds number, with focus on the geometrical representation of the leading-edge (LE) corners. The study contributes to further our understanding of the discrepancies between existing numerical and experimental BARC data. In a first part, rounded LE corners with small curvature radii are considered. Results show that a small amount of rounding does not lead to abrupt changes of the mean fields, but that the effects increase with the curvature radius. The shear layer separates from the rounded LE at a lower angle, which reduces the size of the main recirculating region over the cylinder side. In contrast, the longitudinal size of the recirculating region behind the trailing edge (TE) increases, as the TE shear layer is accelerated. The effect of the curvature radii on the turbulent kinetic energy and on its production, dissipation and transport are addressed. The present results should be contrasted with the recent work of Rocchio et al, JWEIA 2020, who found via implicit Large-Eddy Simulations at larger Reynolds numbers than even a small curvature radius leads to significant changes of the mean flow.
In a second part, the LE corners are fully sharp and the exact analytical solution of the Stokes problem in the neighborhood of the corner is used to locally restore the solution accuracy degraded by the singularity. Changes in the mean flow reveal that the analytical correction leads to streamlines that better follow the corners. The flow separates from the LE with a lower angle, resulting in a slightly smaller recirculating region. The corner-correction approach is valuable in general, and is expected to help develo** high-quality numerical simulations at the high Reynolds numbers typical of the experiments with reasonable meshing requirements.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
CUORE Opens the Door to Tonne-scale Cryogenics Experiments
Authors:
CUORE Collaboration,
D. Q. Adams,
C. Alduino,
F. Alessandria,
K. Alfonso,
E. Andreotti,
F. T. Avignone III,
O. Azzolini,
M. Balata,
I. Bandac,
T. I. Banks,
G. Bari,
M. Barucci,
J. W. Beeman,
F. Bellini,
G. Benato,
M. Beretta,
A. Bersani,
D. Biare,
M. Biassoni,
F. Bragazzi,
A. Branca,
C. Brofferio,
A. Bryant,
A. Buccheri
, et al. (184 additional authors not shown)
Abstract:
The past few decades have seen major developments in the design and operation of cryogenic particle detectors. This technology offers an extremely good energy resolution - comparable to semiconductor detectors - and a wide choice of target materials, making low temperature calorimetric detectors ideal for a variety of particle physics applications. Rare event searches have continued to require eve…
▽ More
The past few decades have seen major developments in the design and operation of cryogenic particle detectors. This technology offers an extremely good energy resolution - comparable to semiconductor detectors - and a wide choice of target materials, making low temperature calorimetric detectors ideal for a variety of particle physics applications. Rare event searches have continued to require ever greater exposures, which has driven them to ever larger cryogenic detectors, with the CUORE experiment being the first to reach a tonne-scale, mK-cooled, experimental mass. CUORE, designed to search for neutrinoless double beta decay, has been operational since 2017 at a temperature of about 10 mK. This result has been attained by the use of an unprecedentedly large cryogenic infrastructure called the CUORE cryostat: conceived, designed and commissioned for this purpose. In this article the main characteristics and features of the cryogenic facility developed for the CUORE experiment are highlighted. A brief introduction of the evolution of the field and of the past cryogenic facilities are given. The motivation behind the design and development of the CUORE cryogenic facility is detailed as are the steps taken toward realization, commissioning, and operation of the CUORE cryostat. The major challenges overcome by the collaboration and the solutions implemented throughout the building of the cryogenic facility will be discussed along with the potential improvements for future facilities. The success of CUORE has opened the door to a new generation of large-scale cryogenic facilities in numerous fields of science. Broader implications of the incredible feat achieved by the CUORE collaboration on the future cryogenic facilities in various fields ranging from neutrino and dark matter experiments to quantum computing will be examined.
△ Less
Submitted 2 December, 2021; v1 submitted 17 August, 2021;
originally announced August 2021.
-
The turbulent flow over the BARC rectangular cylinder: a DNS study
Authors:
Alessandro Chiarini,
Maurizio Quadrio Politecnico di Milano
Abstract:
A Direct Numerical Simulation (DNS) of the incompressible flow around a rectangular cylinder with chord-to-thickness ratio 5:1 (also known as the BARC benchmark) is presented. The work replicates the first DNS of this kind recently presented by Cimarelli et al (2018), and intends to contribute to a solid numerical benchmark, albeit at a relatively low value of the Reynolds number. The study differ…
▽ More
A Direct Numerical Simulation (DNS) of the incompressible flow around a rectangular cylinder with chord-to-thickness ratio 5:1 (also known as the BARC benchmark) is presented. The work replicates the first DNS of this kind recently presented by Cimarelli et al (2018), and intends to contribute to a solid numerical benchmark, albeit at a relatively low value of the Reynolds number. The study differentiates from previous work by using an in-house finite-differences solver instead of the finite-volumes toolbox OpenFOAM, and by employing finer spatial discretization and longer temporal average.
The main features of the flow are described, and quantitative differences with the existing results are highlighted. The complete set of terms appearing in the budget equation for the components of the Reynolds stress tensor is provided for the first time. The different regions of the flow where production, redistribution and dissipation of each component take place are identified, and the anisotropic and inhomogeneous nature of the flow is discussed. Such information is valuable for the verification and fine-tuning of turbulence models in this complex separating and reattaching flow.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Structure function tensor equations in inhomogeneous turbulence
Authors:
Davide Gatti,
Alessandro Chiarini,
Andrea Cimarelli,
Maurizio Quadrio
Abstract:
Exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$ are used to study the two-point statistics of velocity fluctuations in inhomogeneous turbulence. The Anisotropic Generalized Kolmogorov Equations (AGKE) describe the production, transport, redistribution and dissipation of every Reynolds stress component occurring simultaneously among different scales…
▽ More
Exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$ are used to study the two-point statistics of velocity fluctuations in inhomogeneous turbulence. The Anisotropic Generalized Kolmogorov Equations (AGKE) describe the production, transport, redistribution and dissipation of every Reynolds stress component occurring simultaneously among different scales and in space, i.e. along directions of statistical inhomogeneity. The AGKE are effective to study the inter-component and multi-scale processes of turbulence. In contrast to more classic approaches, such as those based on the spectral decomposition of the velocity field, the AGKE provide a natural definition of scales in the inhomogeneous directions, and describe fluxes across such scales too. Compared to the Generalized Kolmogorov Equation, which is recovered as their half trace, the AGKE can describe inter-component energy transfers occurring via the pressure-strain term and contain also budget equations for the off-diagonal components of $\langle δu_i δu_j \rangle$.
The non-trivial physical interpretation of the AGKE terms is demonstrated with three examples. First, the near-wall cycle of a turbulent channel flow at $Re_τ=200$ is considered. The off-diagonal component $\langle -δu δv \rangle$, which can not be interpreted in terms of scale energy, is discussed in detail. Wall-normal scales in the outer turbulence cycle are then discussed by applying the AGKE to channel flows at $Re_τ=500$ and $1000$. In a third example, the AGKE are computed for a separating and reattaching flow. The process of spanwise-vortex formation in the reverse boundary layer within the separation bubble is discussed for the first time.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
An Efficient Numerical Method for the Generalised Kolmogorov Equation
Authors:
Davide Gatti,
Alberto Remigi,
Alessandro Chiarini,
Andrea Cimarelli,
Maurizio Quadrio
Abstract:
An efficient algorithm for computing the terms appearing in the Generalised Kolmogorov Equation (GKE) written for the indefinite plane channel flow is presented. The algorithm, which features three distinct strategies for parallel computing, is designed such that CPU and memory requirements are kept to a minimum, so that high-Re wall-bounded flows can be afforded. Computational efficiency is mainl…
▽ More
An efficient algorithm for computing the terms appearing in the Generalised Kolmogorov Equation (GKE) written for the indefinite plane channel flow is presented. The algorithm, which features three distinct strategies for parallel computing, is designed such that CPU and memory requirements are kept to a minimum, so that high-Re wall-bounded flows can be afforded. Computational efficiency is mainly achieved by leveraging the Parseval's theorem for the two homogeneous directions available in the plane channel geometry. A speedup of 3-4 orders of magnitude, depending on the problem size, is reported in comparison to a key implementation used in the literature. Validation of the code is demonstrated by computing the residual of the GKE, and example results are presented for channel flows at Re_τ=200 and Re_τ=1000, where for the first time they are observed in the whole four-dimensional domain. It is shown that the space and scale properties of the scale-energy fluxes change for increasing values of the Reynolds number. Among all scale-energy fluxes, the wall-normal flux is found to show the richest behaviour for increasing streamwise scales.
△ Less
Submitted 14 October, 2019;
originally announced October 2019.
-
The CUORE cryostat: an infrastructure for rare event searches at millikelvin temperatures
Authors:
C. Alduino,
F. Alessandria,
M. Balata,
D. Biare,
M. Biassoni,
C. Bucci,
A. Caminata,
L. Canonica,
L. Cappelli,
G. Ceruti,
A. Chiarini,
N. Chott,
M. Clemenza,
S. Copello,
A. Corsi,
O. Cremonesi,
A. D'Addabbo,
S. Dell'Oro,
L. Di Paolo,
M. L. Di Vacri,
A. Drobizhev,
M. Faverzani,
E. Ferri,
M. A. Franceschi,
R. Gaigher
, et al. (31 additional authors not shown)
Abstract:
The CUORE experiment is the world's largest bolometric experiment. The detector consists of an array of 988 TeO2 crystals, for a total mass of 742 kg. CUORE is presently taking data at the Laboratori Nazionali del Gran Sasso, Italy, searching for the neutrinoless double beta decay of 130Te. A large custom cryogen-free cryostat allows reaching and maintaining a base temperature of about 10 mK, requ…
▽ More
The CUORE experiment is the world's largest bolometric experiment. The detector consists of an array of 988 TeO2 crystals, for a total mass of 742 kg. CUORE is presently taking data at the Laboratori Nazionali del Gran Sasso, Italy, searching for the neutrinoless double beta decay of 130Te. A large custom cryogen-free cryostat allows reaching and maintaining a base temperature of about 10 mK, required for the optimal operation of the detector. This apparatus has been designed in order to achieve a low noise environment, with minimal contribution to the radioactive background for the experiment. In this paper, we present an overview of the CUORE cryostat, together with a description of all its sub-systems, focusing on the solutions identified to satisfy the stringent requirements. We briefly illustrate the various phases of the cryostat commissioning and highlight the relevant steps and milestones achieved each time. Finally, we describe the successful cooldown of CUORE.
△ Less
Submitted 12 July, 2019; v1 submitted 8 April, 2019;
originally announced April 2019.
-
First Results from CUORE: A Search for Lepton Number Violation via $0νββ$ Decay of $^{130}$Te
Authors:
CUORE Collaboration,
C. Alduino,
K. Alfonso,
E. Andreotti,
C. Arnaboldi,
F. T. Avignone III,
O. Azzolini,
I. Bandac,
T. I. Banks,
G. Bari,
M. Barucci,
J. W. Beeman,
F. Bellini,
G. Benato,
A. Bersani,
D. Biare,
M. Biassoni,
A. Branca,
C. Brofferio,
A. Bryant,
A. Buccheri,
C. Bucci,
C. Bulfon,
A. Camacho,
A. Caminata
, et al. (140 additional authors not shown)
Abstract:
The CUORE experiment, a ton-scale cryogenic bolometer array, recently began operation at the Laboratori Nazionali del Gran Sasso in Italy. The array represents a significant advancement in this technology, and in this work we apply it for the first time to a high-sensitivity search for a lepton-number--violating process: $^{130}$Te neutrinoless double-beta decay. Examining a total TeO$_2$ exposure…
▽ More
The CUORE experiment, a ton-scale cryogenic bolometer array, recently began operation at the Laboratori Nazionali del Gran Sasso in Italy. The array represents a significant advancement in this technology, and in this work we apply it for the first time to a high-sensitivity search for a lepton-number--violating process: $^{130}$Te neutrinoless double-beta decay. Examining a total TeO$_2$ exposure of 86.3 kg$\cdot$yr, characterized by an effective energy resolution of (7.7 $\pm$ 0.5) keV FWHM and a background in the region of interest of (0.014 $\pm$ 0.002) counts/(keV$\cdot$kg$\cdot$yr), we find no evidence for neutrinoless double-beta decay. The median statistical sensitivity of this search is $7.0\times10^{24}$ yr. Including systematic uncertainties, we place a lower limit on the decay half-life of $T^{0ν}_{1/2}$($^{130}$Te) > $1.3\times 10^{25}$ yr (90% C.L.). Combining this result with those of two earlier experiments, Cuoricino and CUORE-0, we find $T^{0ν}_{1/2}$($^{130}$Te) > $1.5\times 10^{25}$ yr (90% C.L.), which is the most stringent limit to date on this decay. Interpreting this result as a limit on the effective Majorana neutrino mass, we find $m_{ββ}<(110 - 520)$ meV, where the range reflects the nuclear matrix element estimates employed.
△ Less
Submitted 1 April, 2018; v1 submitted 22 October, 2017;
originally announced October 2017.
-
The XENON1T Dark Matter Experiment
Authors:
XENON Collaboration,
E. Aprile,
J. Aalbers,
F. Agostini,
M. Alfonsi,
F. D. Amaro,
M. Anthony,
B. Antunes,
F. Arneodo,
M. Balata,
P. Barrow,
L. Baudis,
B. Bauermeister,
M. L. Benabderrahmane,
T. Berger,
A. Breskin,
P. A. Breur,
A. Brown,
E. Brown,
S. Bruenner,
G. Bruno,
R. Budnik,
L. Bütikofer,
J. Calvén,
J. M. R. Cardoso
, et al. (120 additional authors not shown)
Abstract:
The XENON1T experiment at the Laboratori Nazionali del Gran Sasso (LNGS) is the first WIMP dark matter detector operating with a liquid xenon target mass above the ton-scale. Out of its 3.2t liquid xenon inventory, 2.0t constitute the active target of the dual-phase time projection chamber. The scintillation and ionization signals from particle interactions are detected with low-background photomu…
▽ More
The XENON1T experiment at the Laboratori Nazionali del Gran Sasso (LNGS) is the first WIMP dark matter detector operating with a liquid xenon target mass above the ton-scale. Out of its 3.2t liquid xenon inventory, 2.0t constitute the active target of the dual-phase time projection chamber. The scintillation and ionization signals from particle interactions are detected with low-background photomultipliers. This article describes the XENON1T instrument and its subsystems as well as strategies to achieve an unprecedented low background level. First results on the detector response and the performance of the subsystems are also presented.
△ Less
Submitted 23 August, 2017;
originally announced August 2017.
-
CUORE-0 detector: design, construction and operation
Authors:
CUORE Collaboration,
C. Alduino,
K. Alfonso,
D. R. Artusa,
F. T. Avignone III,
O. Azzolini,
M. Balata,
T. I. Banks,
G. Bari,
J. W. Beeman,
F. Bellini,
A. Bersani,
D. Biare,
M. Biassoni,
F. Bragazzi,
C. Brofferio,
A. Buccheri,
C. Bucci,
C. Bulfon,
A. Caminata,
L. Canonica,
X. G. Cao,
S. Capelli,
M. Capodiferro,
L. Cappelli
, et al. (129 additional authors not shown)
Abstract:
The CUORE experiment will search for neutrinoless double-beta decay of $^{130}$Te with an array of 988 TeO$_2$ bolometers arranged in 19 towers. CUORE-0, the first tower assembled according to the CUORE procedures, was built and commissioned at Laboratori Nazionali del Gran Sasso, and took data from March 2013 to March 2015. In this paper we describe the design, construction and operation of the C…
▽ More
The CUORE experiment will search for neutrinoless double-beta decay of $^{130}$Te with an array of 988 TeO$_2$ bolometers arranged in 19 towers. CUORE-0, the first tower assembled according to the CUORE procedures, was built and commissioned at Laboratori Nazionali del Gran Sasso, and took data from March 2013 to March 2015. In this paper we describe the design, construction and operation of the CUORE-0 experiment, with an emphasis on the improvements made over a predecessor experiment, Cuoricino. In particular, we demonstrate with CUORE-0 data that the design goals of CUORE are within reach.
△ Less
Submitted 18 July, 2016; v1 submitted 19 April, 2016;
originally announced April 2016.
-
The 4 K outer cryostat for the CUORE experiment: construction and quality control
Authors:
F. Alessandria,
M. Biassoni,
G. Ceruti,
A. Chiarini,
M. Clemenza,
O. Cremonesi,
V. Datskov,
S. Dossena,
M. Faverzani,
E. Ferri,
A. Nucciotti,
M. Perego,
E. Previtali,
M. Sisti,
L. Taffarello,
F. Terranova
Abstract:
The external shell of the CUORE cryostat is a large cryogen-free system designed to host the dilution refrigerator and the bolometers of the CUORE experiment in a low radioactivity environment. The three vessels that form the outer shell were produced and delivered to the Gran Sasso underground Laboratories in July 2012. In this paper, we describe the production techniques and the validation tests…
▽ More
The external shell of the CUORE cryostat is a large cryogen-free system designed to host the dilution refrigerator and the bolometers of the CUORE experiment in a low radioactivity environment. The three vessels that form the outer shell were produced and delivered to the Gran Sasso underground Laboratories in July 2012. In this paper, we describe the production techniques and the validation tests done at the production site in 2012.
△ Less
Submitted 6 June, 2013;
originally announced June 2013.