-
Slow Light Nanocoatings for Ultrashort Pulse Sha**
Authors:
M. Ossiander,
Y. W. Huang,
W. T. Chen,
Z. Wang,
X. Yin,
Y. A. Ibrahim,
M. Schultze,
F. Capasso
Abstract:
Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: w…
▽ More
Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: we tailor the dispersion of silicon nanopillar arrays such that they temporally reshape pulses upon transmission using slow light effects and act as ultrashort laser pulse compressors. The coatings induce anomalous group delay dispersion in the visible to near-infrared spectral region around 800 nm wavelength over an 80 nm bandwidth. We characterize the arrays' performance in the spectral domain via white light interferometry and directly demonstrate the temporal compression of femtosecond laser pulses. Applying these coatings to conventional optics renders them ultrashort pulse compatible and suitable for a wide range of applications.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
Improving the light collection efficiency of silicon photomultipliers through the use of metalenses
Authors:
A. A. Loya Villalpando,
J. Martin-Albo,
W. T. Chen,
R. Guenette,
C. Lego,
J. S. Park,
F. Capasso
Abstract:
Metalenses are optical devices that implement nanostructures as phase shifters to focus incident light. Their compactness and simple fabrication make them a potential cost-effective solution for increasing light collection efficiency in particle detectors with limited photosensitive area coverage. Here we report on the characterization and performance of metalenses in increasing the light collecti…
▽ More
Metalenses are optical devices that implement nanostructures as phase shifters to focus incident light. Their compactness and simple fabrication make them a potential cost-effective solution for increasing light collection efficiency in particle detectors with limited photosensitive area coverage. Here we report on the characterization and performance of metalenses in increasing the light collection efficiency of silicon photomultipliers (SiPM) of various sizes using an LED of 630~nm, and find a six to seven-fold increase in signal for a $1.3\times1.3~\mathrm{mm}^2$ SiPM when coupled with a 10-mm-diameter metalens manufactured using deep ultraviolet stepper lithography. Such improvements could be valuable for future generations of particle detectors, particularly those employed in rare-event searches such as dark matter and neutrinoless double beta decay.
△ Less
Submitted 3 September, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
-
Semiconductor ring laser frequency combs induced by phase turbulence
Authors:
Marco Piccardo,
Benedikt Schwarz,
Dmitry Kazakov,
Maximilian Beiser,
Nikola Opacak,
Yongrui Wang,
Shantanu Jha,
Michele Tamagnone,
Wei Ting Chen,
Alexander Y. Zhu,
Lorenzo L. Columbo,
Alexey Belyanin,
Federico Capasso
Abstract:
Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, consequently, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despit…
▽ More
Semiconductor ring lasers are miniaturized devices that operate on clockwise and counterclockwise modes. These modes are not coupled in the absence of intracavity reflectors, which prevents the formation of a standing wave in the cavity and, consequently, of a population inversion grating. This should inhibit the onset of multimode emission driven by spatial hole burning. Here we show that, despite this notion, ring quantum cascade lasers inherently operate in phase-locked multimode states, that switch on and off as the pum** level is progressively increased. By rewriting the master equation of lasers with fast gain media in the form of the complex Ginzburg-Landau equation, we show that ring frequency combs stem from a phase instability---a phenomenon also known in superconductors and Bose-Einstein condensates. The instability is due to coupling of the amplitude and phase modulation of the optical field in a semiconductor laser, which plays the role of a Kerr nonlinearity, highlighting a connection between laser and microresonator frequency combs.
△ Less
Submitted 17 September, 2019; v1 submitted 12 June, 2019;
originally announced June 2019.
-
A broadband achromatic polarization-insensitive metalens consisting of anisotropic nanostructures
Authors:
Wei Ting Chen,
Alexander Y. Zhu,
Jared Sisler,
Zameer Bharwani,
Federico Capasso
Abstract:
Metasurfaces have attracted widespread attention due to an increasing demand of compact and wearable optical devices. For many applications, polarization-insensitive metasurfaces are highly desirable and appear to limit the choice of their constituent elements to isotropic nanostructures. This greatly restricts the degrees of geometric parameters available in designing each nanostructure. Here, we…
▽ More
Metasurfaces have attracted widespread attention due to an increasing demand of compact and wearable optical devices. For many applications, polarization-insensitive metasurfaces are highly desirable and appear to limit the choice of their constituent elements to isotropic nanostructures. This greatly restricts the degrees of geometric parameters available in designing each nanostructure. Here, we demonstrate a polarization-insensitive metalens using otherwise anisotropic nanofins which offer additional control over the dispersion and phase of the output light. As a result, we can render a metalens achromatic and polarization-insensitive across nearly the entire visible spectrum from wavelength 460 nm to 700 nm, while maintaining diffraction-limited performance. The metalens is comprised of just a single layer of TiO2 nanofins and has a numerical aperture of 0.2 with a diameter of 26.4 um. The generality of our polarization-insensitive design allows it to be implemented in a plethora of other metasurface devices with applications ranging from imaging to virtual/augmented reality.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Phase and dispersion engineering of metalenses: broadband achromatic focusing and imaging in the visible
Authors:
Wei Ting Chen,
Alexander Y. Zhu,
Vyshakh Sanjeev,
Mohammadreza Khorasaninejad,
Zhujun Shi,
Eric Lee,
Federico Capasso
Abstract:
Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous, broad range of wavelengths is essential for their widespread adoption. So far, efforts to achieve this have been limited to either a reflection configuration o…
▽ More
Metasurfaces have the potential to miniaturize and improve the performance of any optical element, with applications spanning telecommunications, computing and wearable optics. However, the ability to retain functionality over a continuous, broad range of wavelengths is essential for their widespread adoption. So far, efforts to achieve this have been limited to either a reflection configuration or operation at wavelengths other than the visible. Here, we show that by judicious choice of nanostructures, one can independently control both the phase and group delay, leading to broadband transmissive achromatic metalenses and metalenses with tunable dispersion across the visible spectrum. We demonstrate diffraction-limited broadband focusing and achromatic imaging using metalenses across wavelengths from 470 nm to 670 nm, with focal length change of a few percent across this 200 nm bandwidth. This approach requires only a single layer metasurface whose thickness is on the wavelength scale, and does not involve spatial multiplexing or cascading.
△ Less
Submitted 26 November, 2017;
originally announced November 2017.
-
Achromatic Metalens in the Visible and Metalens with Reverse Chromatic Dispersion
Authors:
M. Khorasaninejad,
Z. Shi,
A. Y. Zhu,
W. T. Chen,
V. Sanjeev,
A. Zaidi,
F. Capasso
Abstract:
In this letter, we experimentally report an achromatic metalens (AML) operating over a continuous bandwidth in the visible. This is accomplished via dispersion engineering of dielectric phase shifters: titanium dioxide nanopillars tiled on a dielectric spacer layer above a metallic mirror. The AML works in reflection mode with a focal length independent of wavelength from wavelength of 490 nm to 5…
▽ More
In this letter, we experimentally report an achromatic metalens (AML) operating over a continuous bandwidth in the visible. This is accomplished via dispersion engineering of dielectric phase shifters: titanium dioxide nanopillars tiled on a dielectric spacer layer above a metallic mirror. The AML works in reflection mode with a focal length independent of wavelength from wavelength of 490 nm to 550 nm. We also design a metalens with reverse chromatic dispersion, where the focal length increases as the wavelength increases, contrary to conventional diffractive lenses. The ability to engineer the chromatic dispersion of metalenses at will enables a wide variety of applications that were not previously possible. In particular, for the AML design, we envision applications such as imaging under LED illumination, fluorescence, and photoluminescence spectroscopy.
△ Less
Submitted 23 January, 2017;
originally announced January 2017.
-
Planar Lenses at Visible Wavelengths
Authors:
Mohammadreza Khorasaninejad,
Wei Ting Chen,
Robert C. Devlin,
Jaewon Oh,
Alexander Y. Zhu,
Federico Capasso
Abstract:
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio titanium dioxide metasurfaces can be fabricated and designed as meta-lenses with NA = 0.8. Diffraction-limited focusing is demonstrated at wavelengths of 405 nm,…
▽ More
Sub-wavelength resolution imaging requires high numerical aperture (NA) lenses, which are bulky and expensive. Metasurfaces allow the miniaturization of conventional refractive optics into planar structures. We show that high-aspect-ratio titanium dioxide metasurfaces can be fabricated and designed as meta-lenses with NA = 0.8. Diffraction-limited focusing is demonstrated at wavelengths of 405 nm, 532 nm, and 660 nm with corresponding efficiencies of 86%, 73%, and 66%. The meta-lenses can resolve nanoscale features separated by sub-wavelength distances and provide magnification as high as 170x with image qualities comparable to a state-of-the-art commercial objective. Our results firmly establish that meta-lenses can have widespread applications in laser-based microscopy, imaging, and spectroscopy.
△ Less
Submitted 7 May, 2016;
originally announced May 2016.
-
Integrated Plasmonic Metasurfaces for Spectropolarimetry
Authors:
Wei Ting Chen,
Peter Török,
Matthew R. Foreman,
Chun Yen Liao,
Wei-Yi Tsai,
Pei Ru Wu,
Din ** Tsai
Abstract:
Plasmonic metasurfaces enable simultaneous control of the phase, momentum, amplitude and polarisation of light and hence promise great utility in realisation of compact photonic devices. In this paper, we demonstrate a novel chip-scale device suitable for simultaneous polarisation and spectral measurements through use of six integrated plasmonic metasurfaces (IPMs), which diffract light with a giv…
▽ More
Plasmonic metasurfaces enable simultaneous control of the phase, momentum, amplitude and polarisation of light and hence promise great utility in realisation of compact photonic devices. In this paper, we demonstrate a novel chip-scale device suitable for simultaneous polarisation and spectral measurements through use of six integrated plasmonic metasurfaces (IPMs), which diffract light with a given polarisation state and spectral component into well-defined spatial domains. Full calibration and characterisation of our device is presented, whereby good spectral resolution and polarisation accuracy over a wavelength range of 500-700~nm is shown. Functionality of our device in a Müller matrix modality is demonstrated through determination of the polarisation properties of a commercially available variable waveplate. Our proposed IPM is robust, compact and can be fabricated with a single photolithography step, promising many applications in polarisation imaging, quantum communication and quantitative sensing.
△ Less
Submitted 26 April, 2016; v1 submitted 14 October, 2015;
originally announced October 2015.
-
Toroidal optical activity
Authors:
T. A. Raybould,
V. A. Fedotov,
N. Papasimakis,
I. Kuprov,
I. Youngs,
W. T. Chen,
D. P. Tsai,
N. I. Zheludev
Abstract:
Optical activity is ubiquitous across natural and artificial media and is conventionally understood in terms of scattering from electric and magnetic moments. Here we demonstrate experimentally and confirm numerically a type of optical activity that cannot be attributed to electric and magnetic multipoles. We show that our observations can only be accounted for by the inclusion of the toroidal dip…
▽ More
Optical activity is ubiquitous across natural and artificial media and is conventionally understood in terms of scattering from electric and magnetic moments. Here we demonstrate experimentally and confirm numerically a type of optical activity that cannot be attributed to electric and magnetic multipoles. We show that our observations can only be accounted for by the inclusion of the toroidal dipole moment, the first term of the recently established peculiar family of toroidal multipoles.
△ Less
Submitted 25 August, 2015;
originally announced August 2015.
-
On the operation of a Micropattern Gaseous UV-Photomultiplier in Liquid-Xenon
Authors:
S. Duval,
A. Breskin,
R. Budnik,
W. T. Chen,
H. Carduner,
M. Cortesi,
J. P. Cussonneau,
J. Donnard,
J. Lamblin,
P. Le Ray,
E. Morteau,
T. Oger,
J. S. Stutzmann,
D. Thers
Abstract:
Operation results are presented of a UV-sensitive gaseous photomultiplier (GPM) coupled through a MgF2 window to a liquid-xenon scintillator. It consisted of a reflective CsI photocathode deposited on top of a THick Gaseous Electron Multiplier (THGEM); further multiplication stages were either a second THGEM or a Parallel Ionization Multiplier (PIM) followed by a MICROMEsh GAseous Structure (MICRO…
▽ More
Operation results are presented of a UV-sensitive gaseous photomultiplier (GPM) coupled through a MgF2 window to a liquid-xenon scintillator. It consisted of a reflective CsI photocathode deposited on top of a THick Gaseous Electron Multiplier (THGEM); further multiplication stages were either a second THGEM or a Parallel Ionization Multiplier (PIM) followed by a MICROMEsh GAseous Structure (MICROMEGAS). The GPM operated in gas-flow mode with non-condensable gas mixtures. Gains of 10^4 were measured with a CsI-coated double-THGEM detector in Ne/CH4 (95:5), Ne/CF4 (95:5) and Ne/CH4/CF4 (90:5:5), with soft X-rays at 173 K. Scintillation signals induced by alpha particles in liquid xenon were measured here for the first time with a double-THGEM GPM in He/CH4 (92.5:7.5) and a triple-structure THGEM/PIM/MICROMEGAS GPM in Ne/CH4 (90:10) with a fast-current preamplifier.
△ Less
Submitted 20 January, 2011; v1 submitted 19 January, 2011;
originally announced January 2011.
-
A combinatorial approach to metamaterials discovery
Authors:
E. Plum,
K. Tanaka,
W. T. Chen,
V. A. Fedotov,
D. P. Tsai,
N. I. Zheludev
Abstract:
We report a high through-put combinatorial approach to photonic metamaterial optimization. The new approach is based on parallel synthesis and consecutive optical characterization of large numbers of spatially addressable nano-fabricated metamaterial samples (libraries) with quasi-continuous variation of design parameters under real manufacturing conditions. We illustrate this method for Fano-reso…
▽ More
We report a high through-put combinatorial approach to photonic metamaterial optimization. The new approach is based on parallel synthesis and consecutive optical characterization of large numbers of spatially addressable nano-fabricated metamaterial samples (libraries) with quasi-continuous variation of design parameters under real manufacturing conditions. We illustrate this method for Fano-resonance plasmonic nanostructures arriving at explicit recipes for high quality factors needed for switching and sensing applications.
△ Less
Submitted 2 September, 2010;
originally announced September 2010.
-
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
Authors:
The CMS Electromagnetic Calorimeter Group,
P. Adzic,
N. Almeida,
D. Andelin,
I. Anicin,
Z. Antunovic,
R. Arcidiacono,
M. W. Arenton,
E. Auffray,
S. Argiro,
A. Askew,
S. Baccaro,
S. Baffioni,
M. Balazs,
D. Bandurin,
D. Barney,
L. M. Barone,
A. Bartoloni,
C. Baty,
S. Beauceron,
K. W. Bell,
C. Bernet,
M. Besancon,
B. Betev,
R. Beuselinck
, et al. (245 additional authors not shown)
Abstract:
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews t…
▽ More
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.