-
Large non-reciprocal charge transport in Pt2MnGe up to room temperature
Authors:
K. K. Meng,
K. Wang,
N. N. Zhang,
Z. G. Fu,
J. K. Chen,
Y. Wu,
X. G. Xu,
J. Miao,
Y. Jiang
Abstract:
Non-reciprocal charge transport that is strongly associated with the structural or magnetic chirality of the quantum materials system is one of the most exotic properties of condensed matter physics. Here, using magnetic alloys film Pt2MnGe, we have realized the large non-reciprocal charge transport up to room temperature, which roots in the organic combination of chirality dependent carrier scatt…
▽ More
Non-reciprocal charge transport that is strongly associated with the structural or magnetic chirality of the quantum materials system is one of the most exotic properties of condensed matter physics. Here, using magnetic alloys film Pt2MnGe, we have realized the large non-reciprocal charge transport up to room temperature, which roots in the organic combination of chirality dependent carrier scattering and special magnetic configurations. In this framework, the conduction electrons are scattered asymmetrically by the emerging non-zero vector spin chirality under in-plane magnetic field, resulting in robust non-reciprocal response. More astonishingly, the vector spin chirality in Pt2MnGe film can be reversed by a spin-polarized current through spin Hall effect in a junction with Pt layer. Our work resolves the general limitation of non-reciprocal charge transport to cryogenic temperatures, and paves the way for extending its applications in the emerging field of chiral spintronics.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
COMET Phase-I Technical Design Report
Authors:
The COMET Collaboration,
R. Abramishvili,
G. Adamov,
R. R. Akhmetshin,
A. Allin,
J. C. Angélique,
V. Anishchik,
M. Aoki,
D. Aznabayev,
I. Bagaturia,
G. Ban,
Y. Ban,
D. Bauer,
D. Baygarashev,
A. E. Bondar,
C. Cârloganu,
B. Carniol,
T. T. Chau,
J. K. Chen,
S. J. Chen,
Y. E. Cheung,
W. da Silva,
P. D. Dauncey,
C. Densham,
G. Devidze
, et al. (170 additional authors not shown)
Abstract:
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is…
▽ More
The Technical Design for the COMET Phase-I experiment is presented in this paper. COMET is an experiment at J-PARC, Japan, which will search for neutrinoless conversion of muons into electrons in the field of an aluminium nucleus ($μ-e$ conversion, $μ^- N \to e^- N$); a lepton flavor violating process. The experimental sensitivity goal for this process in the Phase-I experiment is $3.1\times10^{-15}$, or 90 % upper limit of branching ratio of $7\times 10^{-15}$, which is a factor of 100 improvement over the existing limit. The expected number of background events is 0.032. To achieve the target sensitivity and background level, the 3.2 kW 8 GeV proton beam from J-PARC will be used. Two types of detectors, CyDet and StrECAL, will be used for detecting the \mue conversion events, and for measuring the beam-related background events in view of the Phase-II experiment, respectively. Results from simulation on signal and background estimations are also described.
△ Less
Submitted 19 May, 2020; v1 submitted 21 December, 2018;
originally announced December 2018.
-
Multicomponent Gas-Particle Flow and Heat/Mass Transfer Induced by a Localized Laser Irradiation on a Urethane-Coated Stainless Steel Substrate
Authors:
Nazia Afrin,
Yi** Mao,
Yuwen Zhang,
J. K. Chen,
Robin Ritter,
Alan Lampson,
Jonathan Stohs
Abstract:
A three-dimensional numerical simulation is conducted for a complex process in a laser-material system, which involves heat and mass transfer in a compressible gaseous phase and chemical reaction during laser irradiation on a urethane paint coated on a stainless steel substrate. A finite volume method (FVM) with a co-located grid mesh that discretizes the entire computational domain is employed to…
▽ More
A three-dimensional numerical simulation is conducted for a complex process in a laser-material system, which involves heat and mass transfer in a compressible gaseous phase and chemical reaction during laser irradiation on a urethane paint coated on a stainless steel substrate. A finite volume method (FVM) with a co-located grid mesh that discretizes the entire computational domain is employed to simulate the heating process. The results show that when the top surface of the paint reaches a threshold temperature of 560 K, the polyurethane starts to decompose through chemical reaction. As a result, combustion products CO2, H2O and NO2 are produced and chromium (III) oxide, which serves as pigment in the paint, is ejected as solid parcels from the paint into the gaseous domain. Variations of temperature, density and velocity at the center of the laser irradiation spot, and the concentrations of reaction reactant/products in the gaseous phase are presented and discussed, by comparing six scenarios with different laser powers ranging from 2.5 kW to 15 kW with an increment of 2.5 kW.
△ Less
Submitted 16 June, 2018; v1 submitted 15 May, 2016;
originally announced May 2016.
-
Effects of Beam Size and Pulse Duration on the Laser Drilling Process
Authors:
Nazia Afrin,
Pengfei Ji,
J. K. Chen,
Yuwen Zhang
Abstract:
A two-dimensional axisymmetric transient laser drilling model is used to analyze the effects of laser beam diameter and laser pulse duration on the laser drilling process. The model includes conduction and convection heat transfer, melting, solidification and vaporization, as well as material removal resulting from the vaporization and melt ejection. The validated model is applied to study the eff…
▽ More
A two-dimensional axisymmetric transient laser drilling model is used to analyze the effects of laser beam diameter and laser pulse duration on the laser drilling process. The model includes conduction and convection heat transfer, melting, solidification and vaporization, as well as material removal resulting from the vaporization and melt ejection. The validated model is applied to study the effects of laser beam size and pulse duration on the geometry of the drilled hole. It is found that the ablation effect decrease with the increasing beam diameter due to the effect of increased vaporization rate, and deeper hole is observed for the larger pulse width due to the higher thermal ablation efficiency.
△ Less
Submitted 12 April, 2016;
originally announced April 2016.
-
Micro- and Nanoscale Heat Transfer in Femtosecond Laser Processing of Metals
Authors:
Yuwen Zhang,
D. Y. Tzou,
J. K. Chen
Abstract:
Ultrafast laser material processing has received significant attention due to a growing need for the fabrication of miniaturized devices at micro- and nanoscales. The traditional phenomenological laws, such as Fourier's law of heat conduction, are challenged in the microscale regime and a hyperbolic or dual phase lag model should be employed. During ultrafast laser interaction with metal, the elec…
▽ More
Ultrafast laser material processing has received significant attention due to a growing need for the fabrication of miniaturized devices at micro- and nanoscales. The traditional phenomenological laws, such as Fourier's law of heat conduction, are challenged in the microscale regime and a hyperbolic or dual phase lag model should be employed. During ultrafast laser interaction with metal, the electrons and lattices are not in equilibrium. Various two-temperature models that can be used to describe the nonequilibrium heat transfer are presented. A semi-classical two-step heating model to investigate thermal transport in metals caused by ultrashort laser heating is also presented. The main difference between the semiclassical and the phenomenological two-temperature models is that the former includes the effects of electron drifting, which could result in significantly different electron and lattice temperature response from the latter for higher-intensity and shorter-pulse laser heating. Under higher laser fluence and/or short pulse, the lattice temperature can exceed the melting point and melting takes place. The liquid phase will be resolidified when the lattice is cooled by conducting heat away. Ultrafast melting and resolidification of the thin gold film and microparticles were investigated. At even shorter pulse width, femtosecond laser heating on metals produces a blasting force from hot electrons in the sub-picosecond domain, which exerts on the metal lattices along with the non-equilibrium heat flow. Our work that employs the parabolic two-step heating model to study the effect of the hot-electron blast in multi-layered thin metal films is also presented.
△ Less
Submitted 8 November, 2015;
originally announced November 2015.
-
Uncertainty Analysis of Melting and Resolidification of Gold Film Irradiated by Nano- to Femtosecond Lasers Using Stochastic Method
Authors:
Nazia Afrin,
Yuwen Zhang,
J. K. Chen
Abstract:
A sample-based stochastic model is presented to investigate the effects of uncertainties of various input parameters, including laser fluence, laser pulse duration, thermal conductivity constants for electron, and electron-lattice coupling factor, on solid-liquid phase change of gold film under nano- to femtosecond laser irradiation. Rapid melting and resolidification of a free standing gold film…
▽ More
A sample-based stochastic model is presented to investigate the effects of uncertainties of various input parameters, including laser fluence, laser pulse duration, thermal conductivity constants for electron, and electron-lattice coupling factor, on solid-liquid phase change of gold film under nano- to femtosecond laser irradiation. Rapid melting and resolidification of a free standing gold film subject to nano- to femtosecond laser are simulated using a two-temperature model incorporated with the interfacial tracking method. The interfacial velocity and temperature are obtained by solving the energy equation in terms of volumetric enthalpy for control volume. The convergence of variance (COV) is used to characterize the variability of the input parameters, and the interquartile range (IQR) is used to calculate the uncertainty of the output parameters. The IQR analysis shows that the laser fluence and the electron-lattice coupling factor have the strongest influences on the interfacial location, velocity, and temperatures.
△ Less
Submitted 18 February, 2016; v1 submitted 1 October, 2015;
originally announced October 2015.
